Loading...
HomeMy WebLinkAboutFile Documents.124 W Hallam St.0025.2017 (38).ARBKLG’s new module, LG NeON™ 2, adopts Cello technology. Cello technology replaces 3 busbars with 12 thin wires to enhance power output and reliability. LG NeON™ 2 demonstrates LG’s efforts to increase customer’s values performance under real environment, and aesthetic design suitable for roofs. Enhanced Performance Warranty LG NeON™ 2 has an enhanced performance warranty. The annual degradation has fallen from -0.7%/yr to -0.6%/yr. Even after 25 years, the cell guarantees 2.4%p more output than the previous LG NeON™ modules. High Power Output Compared with previous models, the LG NeON™ 2 Aesthetic Roof LG NeON™ 2 has been designed with aesthetics in mind; thinner wires that appear all black at a distance. The product may help increase the value of a property with its modern design. Double-Sided Cell Structure The rear of the cell used in LG NeON™ 2 will contribute to the rear of the module is reabsorbed to generate a great amount of additional power. Better Performance on a Sunny Day LG NeON™ 2 now performs better on sunny days thanks Outstanding Durability With its newly reinforced frame design, LG has extended the warranty of the LG NeON™ 2 for an additional 2 years. Additionally, LG NeON™ 2 can endure a front load up to 6000 Pa, and a rear load up to 5400 Pa. LG320N1C-G4 L LG Electronics is a global player who has been committed to expanding its capacity, based on solar energy business as its future growth engine. We embarked on a solar energy source research program in countries in the following 2 years, thereafter. In 2013, LG NeON™ (previously known as Mono X® NeON) won “Intersolar Award”, which proved LG is the leader of innovation in the industry. About LG Electronics Innovation for a Better Life 60 cell 09/14/2017 LG320N1C-G4 Characteristic Curves North America Solar Business Team LG Electronics U.S.A. Inc 1000 Sylvan Ave, Englewood Cliffs, NJ 07632 Contact: lg.solar@lge.com www.lgsolarusa.com DS-N2-60-C-G-F-EN-50427 Copyright © 2015 LG Electronics. All rights reserved. 01/04/2015 Innovation for a Better Life Electrical Properties (NOCT*) Module Type Maximum Power (Pmax) MPP Voltage (Vmpp) MPP Current (Impp) Open Circuit Voltage (Voc) Short Circuit Current (Isc) 320 W 234 30.7 7.60 37.9 8.10 * NOCT (Nominal Operating Cell Temperature): Irradiance 800 W/m2, ambient temperature 20 °C, wind speed 1 m/s Electrical Properties (STC *) Module Type MPP Voltage (Vmpp) MPP Current (Impp) Open Circuit Voltage (Voc) Short Circuit Current (Isc) Operating Temperature (°C) Maximum System Voltage (V) Maximum Series Fuse Rating (A) Power Tolerance (%) -40 ~ +90 1000 20 0 ~ +3 320 W 33.6 9.53 40.9 10.05 19.5 * STC (Standard Test Condition): Irradiance 1000 W/m², Module Temperature 25 °C, AM 1.5 * The nameplate power output is measured and determined by LG Electronics at its sole and absolute discretion. Mechanical Properties Cells Cell Vendor Cell Type Cell Dimensions # of Busbar Dimensions (L x W x H) Front Load Rear Load Weight Connector Type Junction Box Length of Cables Glass Frame 6 x 10 LG Monocrystalline / N-type 156.75 x 156.75 mm / 6 inches 12 (Multi Wire Busbar) 1640 x 1000 x 40 mm 64.57 x 39.37 x 1.57 inch 6000 Pa / 125 psf 5400 Pa / 113 psf 17.0 ± 0.5 kg / 37.48 ± 1.1 lbs MC4, MC4 Compatible, IP67 IP67 with 3 Bypass Diodes 2 x 1000 mm / 2 x 39.37 inch High Transmission Tempered Glass Anodized Aluminum Temperature Characteristics NOCT Pmpp Voc Isc 46 ± 3 °C -0.38 %/°C -0.28 %/°C 0.03 %/°C Module Fire Performance (USA) Fire Rating (for CANADA) Product Warranty Output Warranty of Pmax IEC 61215, IEC 61730-1/-2 IEC 62716 (Ammonia Test) IEC 61701 (Salt Mist Corrosion Test) ISO 9001 UL 1703 Type 2 (UL 1703) Class C (ULC/ORD C1703) 12 years Linear warranty* * 1) 1st year: 98%, 2) After 2nd year: 0.6%p annual degradation, 3) 83.6% for 25 years Current (A)Isc, Voc, Pmax (%)Voltage (V) Temperature (°C) 10.00 1000W 600W 200W 800W 400W 6.00 2.00 8.00 4.00 0.00 10.00 30.0020.00 40.0015.00 35.0025.00 45.005.00 Isc Voc Pmax 140 60 100 20 120 40 80 0 -40 90 0 25-25 50 75 Dimensions (mm/in) * The distance between the center of the mounting/grounding holes. Detail X Detail Y Detail Z Long side frame7.5 / 0.304.0 / 0.165.5 / 0.22 R1.5 / R0.06 4.0 / 0.16 Ø8 / Ø0.31 10.0 29.040.0 10.0 29.0 40.0Short side frame 40.0 270.0170.0105 .0(Z view) 8 - Ø 8.2 Mounting holes(8ea) (X view) 4 - 5.5 x 4.0 Drain holes(4ea) 4 - Ø 4.3 Grounding holes(12ea) 1000.0 (Distance between mounting holes) (Size of short side)1640.0(Size of long side)960.0 1100.0Junction box 1000 .0 Cable length (Distance between mounting holes)1300.0(Distance between mounting holes)Drain holes(4ea) (Y view) 4 - 7.5 x 4.0 09/14/2017 INVERTERSwww.solaredge.us SolarEdge Single Phase Inverters For North America SE3000A-US / SE3800A-US / SE5000A-US / SE6000A-US / SE7600A-US / SE10000A-US / SE11400A-US USA - GERMANY - ITALY - FRANCE - JAPAN - CHINA - AUSTRALIA - THE NETHERLANDS - UK - ISRAEL 12-25 The best choice for SolarEdge enabled systems Integrated arc fault protection for NEC 2011 690.11 compliance Rapid shutdown for NEC 2014 690.12 Superior efficiency (98%) Small, lightweight and easy to install on provided bracket Built-in module-level monitoring Internet connection through Ethernet or Wireless Outdoor and indoor installation Fixed voltage inverter, DC/AC conversion only Pre-assembled Safety Switch for faster installation Optional – revenue grade data, ANSI C12.20 09/14/2017 © SolarEdge Technologies, Inc. All rights reserved. SOLAREDGE, the SolarEdge logo, OPTIMIZED BY SOLAREDGE are trademarks or registered trademarks of SolarEdge Technologies, Inc. All other trademarks mentioned herein are trademarks of their respective owners. Date: 11/2016. V.01. Subject to change without notice. Single Phase Inverters for North America SE3000A-US / SE3800A-US / SE5000A-US / SE6000A-US / SE7600A-US / SE10000A-US / SE11400A-US SE3000A-US SE3800A-US SE5000A-US SE6000A-US SE7600A-US SE10000A- US SE11400A-US OUTPUT Nominal AC Power Output 3000 3800 5000 6000 7600 9980 @ 208V 10000 @240V 11400 VA Max. AC Power Output 3300 4150 5400 @ 208V 5450 @240V 6000 8350 10800 @ 208V 10950 @240V 12000 VA AC Output Voltage Min.-Nom.-Max.(1) 183 - 208 - 229 Vac --3 --3 - AC Output Voltage Min.-Nom.-Max.(1) 211 - 240 - 264 Vac 3 3 3 3 3 3 3 AC Frequency Min.-Nom.-Max.(1) 59.3 - 60 - 60.5 Hz Max. Continuous Output Current 12.5 16 24 @ 208V 21 @ 240V 25 32 48 @ 208V 42 @ 240V 47.5 A GFDI Threshold 1 A Utility Monitoring, Islanding Protection, Country Configurable Thresholds Yes Yes INPUT Maximum DC Power (STC)4050 5100 6750 8100 10250 13500 15350 W Transformer-less, Ungrounded Yes Max. Input Voltage 500 Vdc Nom. DC Input Voltage 325 @ 208V / 350 @ 240V Vdc Max. Input Current(2) 9.5 13 16.5 @ 208V 15.5 @ 240V 18 23 33 @ 208V 30.5 @ 240V 34.5 Adc Max. Input Short Circuit Current 45 Adc Reverse-Polarity Protection Yes Ground-Fault Isolation Detection 600k Sensitivity Maximum Inverter Efficiency 97.7 98.2 98.3 98.3 98 98 98 % CEC Weighted Efficiency 97.5 98 97 @ 208V 98 @ 240V 97.5 97.5 97 @ 208V 97.5 @ 240V 97.5 % Nighttime Power Consumption < 2.5 < 4 W ADDITIONAL FEATURES Supported Communication Interfaces RS485, RS232, Ethernet, ZigBee (optional) Revenue Grade Data, ANSI C12.20 Optional(3) Rapid Shutdown – NEC 2014 690.12 Yes STANDARD COMPLIANCE Safety UL1741, UL1741 SA, UL1699B, UL1998 , CSA 22.2 Grid Connection Standards IEEE1547 Emissions FCC part15 class B INSTALLATION SPECIFICATIONS AC output conduit size / AWG range 3/4” minimum / 16-6 AWG 3/4” minimum / 8-3 AWG DC input conduit size / # of strings / AWG range 3/4” minimum / 1-2 strings / 16-6 AWG 3/4” minimum / 1-3 strings / 14-6 AWG Dimensions with Safety Switch (HxWxD) 30.5 x 12.5 x 7.2 / 775 x 315 x 184 30.5 x 12.5 x 10.5 / 775 x 315 x 260 in / mm Weight with Safety Switch 51.2 / 23.2 54.7 / 24.7 88 .4 / 40.1 lb / kg Cooling Natural Convection Natural convection and internal fan (user replaceable) Fans (user replaceable) Noise < 25 < 50 dBA Min.-Max. Operating Temperature Range -13 to +140 / -25 to +60 (-40 to +60 version available(4)) ˚F / ˚C Protection Rating NEMA 3R (1) For other regional settings please contact SolarEdge support. (2) A higher current source may be used; the inverter will limit its input current to the values stated.(3) Revenue grade inverter P/N: SExxxxA-US000NNR2 (for 7600W inverter:SE7600A-US002NNR2).(4) -40 version P/N: SExxxxA-US000NNU4 (for 7600W inverter:SE7600A-US002NNU4). Inverter for 3.2 KW solar system 09/14/2017 POWER OPTIMIZERSolarEdge Power Optimizer Module Add-On For North America P300 / P320 / P400 / P405 Up to 25% more energy Superior efficiency (99.5%) Mitigates all types of module mismatch losses, from manufacturing tolerance to partial shading Flexible system design for maximum space utilization Fast installation with a single bolt Next generation maintenance with module-level monitoring Module-level voltage shutdown for installer and firefighter safety PV power optimization at the module-level www.solaredge.usUSA - CANADA - GERMANY - ITALY - FRANCE - JAPAN - CHINA - AUSTRALIA - THE NETHERLANDS - UK - ISRAEL - TURKEY - SOUTH AFRICA - BULGARIA 09/14/2017 © SolarEdge Technologies, Inc. All rights reserved. SOLAREDGE, the SolarEdge logo, OPTIMIZED BY SOLAREDGE are trademarks or registered trademarks of SolarEdge Technologies, Inc. All other trademarks mentioned herein are trademarks of their respective owners. Date: 01/2017 V.01. Subject to change without notice. (2) It is not allowed to mix P405 with P300/P400/P600/P700 in one string. P300 (for 60-cell modules) P320 (for high-power 60-cell modules) P400 (for 72 & 96-cell modules) P405 (for thin film modules) INPUT Rated Input DC Power(1)300 320 400 405 W Absolute Maximum Input Voltage (Voc at lowest temperature) 48 80 125 Vdc MPPT Operating Range 8 - 48 8 - 80 12.5 - 105 Vdc Maximum Short Circuit Current (Isc) 10 11 10.1 Adc Maximum DC Input Current 12.5 13.75 12.63 Adc Maximum Efficiency 99.5 % Weighted Efficiency 98.8 % Overvoltage Category II OUTPUT DURING OPERATION (POWER OPTIMIZER CONNECTED TO OPERATING SOLAREDGE INVERTER) Maximum Output Current 15 Adc Maximum Output Voltage 60 85 Vdc OUTPUT DURING STANDBY (POWER OPTIMIZER DISCONNECTED FROM SOLAREDGE INVERTER OR SOLAREDGE INVERTER OFF) Safety Output Voltage per Power Optimizer 1 Vdc STANDARD COMPLIANCE EMC FCC Part15 Class B, IEC61000-6-2, IEC61000-6-3 Safety IEC62109-1 (class II safety), UL1741 RoHS Yes INSTALLATION SPECIFICATIONS Maximum Allowed System Voltage 1000 Vdc Compatible inverters All SolarEdge Single Phase and Three Phase inverters Dimensions (W x L x H)128 x 152 x 27.5 / 5 x 5.97 x 1.08 128 x 152 x 35 / 5 x 5.97 x 1.37 128 x 152 x 50 / 5 x 5.97 x 1.96 mm / in Weight (including cables)630 / 1.4 750 / 1.7 845 / 1.9 gr / lb Input Connector MC4 Compatible Output Wire Type / Connector Double Insulated; MC4 Compatible Output Wire Length 0.95 / 3.0 1.2 / 3.9 m / ft Operating Temperature Range -40 - +85 / -40 - +185 ˚C / ˚F Protection Rating IP68 / NEMA6P Relative Humidity 0 - 100 % (1) Rated STC power of the module. Module of up to +5% power tolerance allowed. SolarEdge Power Optimizer Module Add-On for North America P300 / P320 / P400 / P405 PV SYSTEM DESIGN USING A SOLAREDGE INVERTER(2)SINGLE PHASE THREE PHASE 208V THREE PHASE 480V Minimum String Length (Power Optimizers) 8 10 18 Maximum String Length (Power Optimizers)25 25 50 Maximum Power per String 5250 6000 12750 W Parallel Strings of Different Lengths or Orientations Yes 09/14/2017