HomeMy WebLinkAboutFile Documents.135 E Cooper Ave.0134.2019.ARBK
Property Address
135 E. Cooper
Aspen, CO 81611
Element Environmental Project#:
Eigelberger 060719 Addition
Client Job Name
Addition
TABLE OF CONTENTS
1.0 - Scope of Work
2.0 - Sampling Requirements
3.0 - Sampling Methodology
4.0 - Laboratory
5.0 - Suspect Materials Sampled
6.0 - Table of Results
7.0 - Description of Sampling Area
8.0 - Conclusion
9.0 - Lab Report
10.0 - Certificates
Asbestos Samples Analyzed: 16
Positive Asbestos Samples: 0
___________________________________________________ ASBESTOS LEAD HAZMAT RESTORATION www.elementconsults.com Asbestos Sampling Report
Date: 06/11/2019
Date of Inspection: 06/07/2019
Client:
Eigelberger Architecture and Design
350 Market St. Suite 309
Basalt, CO 81621
Attn:
Natacha Denis
Building Inspector:
Ellen Johnson
CDPHE #23799
Joshua Johnson
CDPHE #18401
189 County Rd. 135
Glenwood Springs, CO 81601
josh@elementconsults.com
(970) 274-3139
06/13/2019
Project #-Eigelberger 060719 Addition
2
1.0- This was an inspection for suspect ACM (Asbestos Containing Material) for a relocation
and remodel. Element Environmental conducted a visible inspection for visible materials
that would be impacted during the remodel. This inspection was limited to the areas
found in the Description of the Sampling Area 7.0. Although sampling is destructive in
nature, this was a non-invasive inspection. It was of materials that were accessible. If
other suspect materials become visible/apparent during demolition or construction
activities, work in that area should be halted and more sampling/testing must take
place, per Colorado regulations. Any suspect materials that were not tested are to be
assumed to contain asbestos.
2.0- A limited bulk sampling of from all suspect materials was conducted in accordance with
Colorado State Requirements. The minimum number of samples per homogenous areas
are as follows:
2.1- Surfacing Materials- <1,000 sq.ft.- Minimum of 3 samples
1,000 sq.ft.- 5,000sq.ft.- Minimum of 5 samples
>5,000 sq.ft. Minimum of 7 samples
2.2- Miscellaneous materials- Minimum of 2 samples
2.3- Thermal Systems Insulation (TSI)- Minimum of 3 samples
3.0- The purpose of the inspection is to identify materials that are homogenous. A
homogeneous area is defined as one which shares suspect material, texture, color,
location, and/or apparent time of construction. The materials are segregated into
separate homogenous areas. The size is determined and then samples are taken. The
materials are touched to determine friability. Friable ACM is material that can be
crushed or reduced to powder by hand pressure. The samples are taken in a random
numerical sequence.
4.0- Ellen Johnson, a Colorado Department of Public Health & Environment certified building
inspector, certification number: 23799, performed the inspection. The findings were
reviewed by Josh Johnson, a Colorado Department of Public Health & Environment
certified building inspector, certification number: 18401. Samples taken were sent to
CEI Labs in Cary, North Carolina. The samples were analyzed by PLM (Polarized Light
Microscopy) analysis. Per the CDPHE Regulation any sample that is found by a lab to be
trace, or <1% asbestos, is considered to be ACM material. This material would still be a
regulated material by CDPHE. The sample must have an additional “point count”
performed to be considered less than 1% and not be regulated by the CDPHE. The lab’s
documents with analyses and findings are found below.
06/13/2019
Project #-Eigelberger 060719 Addition
3
5.0- SUSPECT MATERIALS SAMPLES
• Drywall
• Joint Compound
• Texture
• Tape
• Carpet
• Tile Grout
6.0- TABLE OF RESULTS
HOMOGENOUS
AREA
DESCRIPTION OF AREA ACM CATEGORY NUMBER
OF
SAMPLES
APPROXIMATE
SQ.FT.*
ACM ASSESSMENT CATEGORIES
% AND TYPE OF
ASBESTOS FOUND
(A) Light Roll Texture throughout the
Basement Surfacing
5 ~4000 sq.ft. Friable Non ACM No Asbestos Detected
(B) Light Roll Texture on Main Level
and 2nd Level Surfacing
5 ~4500 sq.ft. Friable Non ACM No Asbestos Detected
(C) Carpet Miscellaneous
2 ~600 sq.ft. Non-Friable Non ACM No Asbestos Detected
(D) Tile Grout Miscellaneous
2 ~900 sq.ft. Non-Friable Non ACM No Asbestos Detected
(E) Fire-Taped Drywall in the
Mechanical Room Miscellaneous
2 ~60 sq.ft. Friable Non ACM No Asbestos Detected
Key:
ACM Assessment Categories:
1- Damaged or significantly damaged Thermal Systems Insulation
(TSI) ACM
2- Damaged friable surfacing ACM
3- Significantly damaged friable Surfacing ACM
4- Damaged or significantly damaged friable Miscellaneous ACM
5- ACM with potential for damage
6- ACM with potential for significant damage
7- Friable ACM with low potential for damage
Other- ACM not classified in the above Assessment Categories
N/A- Not Applicable
* Square footage is estimated and not for bidding purposes
06/13/2019
Project #-Eigelberger 060719 Addition
4
7.0- DESCRIPTION OF SAMPLING AREA
• The Texture on the walls and ceilings in the Basement, Main Level and 2nd Level
• The Carpet on the 2nd Level and Basement bedrooms
• The Tile Grout in the Basement floor
• The Fire-taped drywall in the mechanical room
8.0- CONCLUSION.
No Asbestos was detected in any of the samples tested.
Sincerely,
Ellen Johnson
06/13/2019
Project #-Eigelberger 060719 Addition
5
9.0- LAB REPORT
06/13/2019
Project #-Eigelberger 060719 Addition
6
06/13/2019
Project #-Eigelberger 060719 Addition
7
06/13/2019
Project #-Eigelberger 060719 Addition
8
06/13/2019
Project #-Eigelberger 060719 Addition
9
06/13/2019
Project #-Eigelberger 060719 Addition
10
06/13/2019
Project #-Eigelberger 060719 Addition
11
06/13/2019
Project #-Eigelberger 060719 Addition
12
10.0- CERTIFICATES
06/13/2019