HomeMy WebLinkAboutFile Documents.700 Gillespie St.0129.2018 (9).ACBKAluminum Housing
Ceramic Light Emitting Surface
0.94”
0.2”
0.33”
Ordering Codes
In a continuing effort to offer the best product possible we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product.v.3.8.18 Page 1 of 3AIRbar
www.brucklighting.comBruck By Ledra Brands Inc.15774 Gateway Circle
Tustin, CA 92780
PH: 714.259.9959
FAX: 714.259.9969
Job Name:Contact:
Fixture Type:Ordering Code:
AIRbar Flush Mount 1.0
Description
The AIRbar Flush Mount 1.0 luminaire allows for ultimate flexibility for all lighting projects. The AIRbar is
perfect for embedded, surface mounted, and under cabinet lighting applications. Its ultra slim profile at 5mm thick and light weight housing directly attaches to steel surfaces with integrated magnets. Mounting
Accessories allow for simple magnetic attachment to most application. When a permanent installation is required, double sided VHB tape or suitable adhesives are recommended. Capable of 770 lumens/foot
@ 125 lumens per watt efficacy, the AIRbar can be installed individually or linked continuously. A truly sustainable light source comprised of ceramic and aluminum, the AIRbar uses 50x fewer raw materials than
conventional light sources (measured by weight of fixtures in a typical installation).
Follow the steps to specify your fixture, example: 120 - FM - 10 - 24 - 40K - 80
Part Number Mounting Width Length CCT CRI
120 FM 10 24
18
12
6
27K
30K
35K
40K
80
901
AIRbar Flush Mount 1” wide
(nominal)
24” Long
18” Long
12” Long
6” Long
2700K
3000K
3500K
4000K
Housing
Mounting
Electrical
Wiring
Listings
Perfectly Lambertian
- Embedded or surface mounted applications
- Magnetically attaches directly to U-Channel Accessories, Mounting Plate Kit, or other steel surfaces.
- Compatible with downlighting applications using the U-Channel Accessory
- May be permanently fastened using double sided tape (3M VHB) or other common Adhesives
- 6.2W per foot, 24.7Vdc Constant Voltage input
- Remote Class 2 Power Supply required (refer to Power Supply section)
- Maximum 15 foot run with one 100W power supply
- Unlimited run lengths using multiple power supplies
- Dimmable to less than 1% (refer to Control Accessories section)
- Integrated thermal feedback protection prevents overheating under abnormal power conditions
- Integrated push-in wire connector allows for both input and output wiring (to aid in daisy chaining
luminaires).
- 20 AWG stranded wire with ¼” tinned ends recommended
- Wire harness is included with each luminaire (harness length = length of luminaire – ¼”). Use this harness
to connect to building wiring or to adjacent luminaires for continuous runs.
- 1” (nominal) wide housing delivers 770 lumens per foot
- 6/12/18/24” L x 0.94” W x 0.2” H
- 1.0oz per foot (93g/m)
- The ceramic light emitting surface acts as the heatsink and circuit board for the chip scale package LEDs
- The lightweight aluminum housing reflects the LED light back out through the ceramic
- cULus Listed to UL2108
- Rated both Type IC & non-IC
- Suitable for dry and damp locations
- Operating environment: -10°F to 115°F / -23°C to 46°C
- Certified to be the first, and only, lighting product to obtain an LBC Red List Free Declare label with the
International Living Future Institute’s (ILFI) Living Building Challenge.
80CRI
90CRI
1. 90 CRI is ONLY available in 2700K and 3000K.
Notes
01/29/2019
Led Performance
Control Accessories
Power Supplies
In a continuing effort to offer the best product possible we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product.v.3.8.18 Page 2 of 3AIRbar
www.brucklighting.comBruck By Ledra Brands Inc.15774 Gateway Circle
Tustin, CA 92780
PH: 714.259.9959
FAX: 714.259.9969
Job Name:Contact:
Fixture Type:Ordering Code:
LED
SDCM
CCT
CRI Ra
Efficacy
Light Emitting Surface
Life
Warranty
Samsung chip scale package (LM101A series)
3 Step MacAdam Ellipse
2700K, 3000K, 3500K, 4000K
82-84 typical (consult factory for 90CRI lead time)
124 lumens/Watt (4000K)
Reaches 45ºC in a 25ºC environment at 24.7Vdc input.
L70 > 54,000hrs
5 year limited fixture warranty
P70495-100-241
P70495-80-241
P70495-60-241
P70495-40-241
(factory-set to 24.1Vdc output)
96W/24.1V adjustable Power Supply (Meanwell HLG-100H-24A) with ETL Listed Enclosure / Operates 0 to 15 Linear Feet
80W/24.1V adjustable Power Supply (Meanwell HLG-80H-24A) with ETL Listed Enclosure / Operates 0 to 12 Linear Feet
60W/24.1V adjustable Power Supply (Meanwell HLG-60H-24A) with ETL Listed Enclosure / Operates 0 to 9 Linear Feet
40W/24.1V adjustable Power Supply (Meanwell HLG-40H-24A) with ETL Listed Enclosure / Operates 0 to 6 Linear Feet
ILLUMRATM Constant Voltage LED Dimming Controllers deliver 65,000 PWM dimming steps to provide ultra smooth dimming performance through all light levels. Pair these controllers with either hardwired 0-10V dimming systems or Illumra’s wireless Rocker Switches. These
Controllers must be wired between the output of the Power Supply and the input of the LED Luminaire, so no auxiliary power source is required.
ILLUMRATM self-powered Rocker Switches use no wires or batteries. Pressing the switch creates the energy to transmit a wireless signal that
controls lights or other devices connected to EnOcean receivers. One Rocker Switch may be paired with one or more Controllers, or multiple
Rocker Switches (up to 25) may be paired with one Controller. 50-150 foot range (typical) using 902MHz.
ILLUMRATM (hardwired) 0-10V Controller NWO-D02FP-C01
Use this controller to support 0-10V dimming. Compatible with industry standard 0-10V dimmers (Leviton IP710-DLX or similar).
Use one controller per Power Supply.
ILLUMRATM Wireless Single Rocker Switch (WHITE) E9T-S1AWH
Use this Rocker Switch for ON/OFF/Dimming (100% to <1%) control. Compatible with Illumra’s Wireless Controllers.
ILLUMRATM Wireless Controller E9X-D02FL
Use this controller to support wireless dimming. Compatible with Illumra’s Wireless Rocker Switches using EnOcean technology.
Use one controller per Power Supply.
ILLUMRATM Wireless Dual Rocker Switch (WHITE) E9T-S2AWH
Use this Rocker Switch for ON/OFF/Dimming (100% to <1%) control of two lights or two groups of lights. Compatible with Illumra’s Wireless Controllers.
p/n: 70496-001
p/n: 70496-002
p/n: 70497-001WH
p/n: 70497-002WH
4000K3500K3000K2700K
770 755 755 691
Delivered Lumens Per Foot CCT
8-30VDC
8-30VDC
LED Dimmer
01/29/2019
1-1/2"
1"3/4"0.05" 0.14" (2)
1/4"1"1/4"
1/4"1"1/4"
1"1/2"0.05"1-1/2"
0.14" (2)
1"3/8"5/8"3/8"AIRBAR MOUNTING ACCESSORIES
In a continuing effort to offer the best product possible we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product.v.3.8.18 Page 3 of 3AIRbar
www.brucklighting.comBruck By Ledra Brands Inc.15774 Gateway Circle
Tustin, CA 92780
PH: 714.259.9959
FAX: 714.259.9969
Job Name:Contact:
Fixture Type:Ordering Code:
AIRbar U-Channel 1.0
The AIRbar U-Channel 1.0 provides an optimal solution for surface mounted lighting applications. While maintaining the AIRbar products slim profile look, the U-Channel serves as a housing and offers several finish options. The U-Channel is ideal for surface-mount and
under cabinet lighting applications. Constructed with 24 gauge galvanized steel, the U-Channel is light weight and can be installed with #6 pan head screws or double sided VHB tape (hardware/tape provided by others).
Dimensions: 1” Wide x 3/8” High x 72” or 24” Long.
Mounting Holes: Clearance holes for #6 screws, on 6” centers
Material: 24 Gauge Galvanized Steel
The AIRbar Mounting Plate Kit provides a simple solution for embedded applications in wood or other materials. While maintaining the AIRbar
products slim profile, the Mounting Plate serves as a magnetic surface to allow the AIRbar to magnetically attach. Constructed with 24 gauge
galvanized steel, the Mounting Plates can be fastened using #6 pan head screws or double sided VHB tape (hardware/tape provided by others).
Kit Includes: (2) Mounting Plates
Plate Dimension: 0.75” x 1.5” Wide, 0.050” thick
Mounting Holes: Clearance holes for #6 screws, on 1.0” centers
Material: 24 Gauge Galvanized Steel
(AIRbar U-Channel 1” Wide, 6FT Long, White Finish, Field Cuttable)
(AIRbar Mounting Plate Kit, for 1” Wide Airbar)
(AIRbar U-Channel 1” Wide, 2FT Long, White Finish, Field Cuttable)
p/n: 81188wh-72
p/n: 120-MPK-10
p/n: 81188wh-24
AIRbar Mounting Plate 1.0
01/29/2019