The URL can be used to link to this page

Home My WebLink AboutFile Documents.614 North St.0248.2017 (2).ARBK800-479-6832 | P.O. Box 7000 | Carlisle, PA 17013 | Fax: 717-245-7053 | www.carlislesyntec.com EXPERIENCE THE CARLISLE DIFFERENCE (Combustible Deck) Insulation Overview SecurShield CD is a rigid roof insulation panel composed of a closed-cell polyisocyanurate foam core manufactured on-line to an extra durable, dimensionally stable coated-glass facer on each surface side. Features and Beneﬁ ts »Achieves a UL Class A combustible deck assembly rating at a 1" thickness without the use of a ﬁ re-rated slip sheet or the presence of a gypsum coverboard.* *Maximum roof slope – ½":12" »Premium facer improves ﬁ re resistance, moisture resistance and dimensional stability »Superior facer adhesion to the foam core »Highest R-value per inch of commercially available insulation »Zero ozone-depleting components, CFC-free, HCFC-free, EPA- compliant and nearly zero global warming potential (GWP) Panel Characteristics »Available in 4' x 4' (1220 mm x 1220 mm) and 4' x 8' (1220 mm x 2440 mm) panels in a thickness of 1" (25.4 mm) »9 lbs per 4' x 8' panel Installation Mechanically Attached Single-ply Systems Each SecurShield CD panel must be secured to the roof deck with fasteners and plates (appropriate to the deck type). Butt edges and stagger joints of adjacent panels. Install the roof membrane according to Carlisle’s speciﬁ cations. Fully Adhered Single-ply Systems Each SecurShield CD panel must be secured to the roof deck with fasteners and plates (appropriate to the deck type.) Butt edges and stagger joints of adjacent panels. Install the roof membrane according to Carlisle’s speciﬁ cations. SecurShield CD 4' x 8' panels can be secured to the roof deck with Carlisle’s FAST™ Adhesive technology. Review Carlisle speciﬁ cations and details for complete installation information. Code Approvals »ASTM-C 1289, Type II, Class 2, Grade 2 (20 psi), Grade 3 (25 psi) »UL Classiﬁ ed for Class A »International Building Code (IBC) Section 2603 NOTE: Please be aware the Federal Speciﬁ cation HH-1-1972/GEN has been replaced Underwriters Laboratories, Inc. »Insulated metal deck assemblies – UL 1256 (nos. 120, 123, 292) »Component of Class A roof systems. Built-up, modiﬁ ed bitumen and single-ply (ballasted, mechanically attached & fully adhered) (UL 790) »SecurShield classiﬁ ed by ULC – Refer to directory of products for details Thermal Values Thickness (inches) Thickness (MM) LTTR R-value Flute Spanability 1.00 25.4 5.7 2 5⁄8" 2/27/2018 EXPERIENCE THE CARLISLE DIFFERENCE 800-479-6832 | P.O. Box 7000 | Carlisle, PA 17013 | Fax: 717-245-7053 | www.carlislesyntec.com 10.31.17 © 2017 Carlisle. REPRINT CODE: 605886 - “SecurShield CD Product Data Sheet” Carlisle, SecurShield and FAST are trademarks of Carlisle. LEED is a registered trademark of the U.S. Green Building Council. Precautions Insulation must be protected from open ﬂ ame and kept dry at all times. Install only as much insulation as can be covered the same day by completed roof material. Carlisle will not be responsible for speciﬁ c building and roof design by others, for deﬁ ciencies in construction or workmanship, for dangerous conditions on the jobsite or for improper storage and handling. Technical speciﬁ cations shown in this literature are intended to be used as general guidelines only and are subject to change without notice. Call Carlisle for more speciﬁ c details or refer to PIMA Technical Bulletin No. 109: Storage & Handling Recommendations for Polyiso Roof Insulation. LEED® Information Pre-consumer Recycled Content 0% Post-consumer Recycled Content 0% Manufacturing Location Puyallup, WA Energy and Atmosphere Minimum Energy Performance Optimize Energy Performance Material and Resources Construction Waste Management Local and Regional Materials Recycled Content Material Reuse (Combustible Deck) Insulation Typical Properties and Characteristics Physical Property Test Method Value Compressive Strength ASTM D1621 ASTM 1289 20 psi* minimum (138 kPa, Grade 2) Dimensional Stability ASTM D2126 2% linear change (7 days) Moisture Vapor Transmission ASTM E96 <1 perm [57.5ng/(Pa•s•m²)] Water Absorption ASTM C209 <1% volume Service Temperature -100°F to 260°F (-73°C to 126°C) *Also available in 25 psi minimum, Grade 3 Typical properties and characteristics are based on samples tested and are not guaranteed for all samples of this product. This data and information is intended as a guide and does not reﬂ ect the speciﬁ cation range for any particular property of this product. 2/27/2018