Loading...
HomeMy WebLinkAboutFile Documents.675 E Durant Ave.0043.2019 (10).ACBK8 1 Area Qty(s):CN: 8 Project #:18017 Issue Date:01/18/19 Project Name:The Little Nell - Lobby Renovation Item Description:SCONCE AT CHAIR 9 - EXISTING Item Number:LT-304 Item Quantity: 8 ea Manufacturer:N/A Source:N/A Revision(s):02/08/19 ' UPDATED QUANTITY AND SPECIFICATION 1 Contact: Phone: Fax: Address: Address: Contact: E-mail:E-mail: Web:Web: Phone: Fax: Description:SCONCE AT CHAIR 9 Required Item(s) for Designer Approval Prior to Fabrication: *EXISTING FIXTURE TO REMAIN REFINISH AND REFURBISH AS NEEDED Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate 81 83 Lamp Type: Switch Type: Notes:- LIGHTING DESIGNER TO CONFIRM ALL TECHNICAL INFORMATION OF SELECTED ITEM. TO BE COORDINATED WITH GC FOR PROPER INSTILLATION. - ALL FINISHES MUST BE FINISHED FOR MAXIMUM DURABILITY AND CONSISTENT THROUGHOUT. - ALL METAL JOINTS TO COMPLETELY WELDED, SANDED SMOOTH AND FINISHED EVENLY FOR INVISIBLE WELD. NO SHARP EDGES AND CORNERS. PROVIDE PROGRESS PHOTOS FOR DESIGNERS REVIEW. Instructions: SEE PREAMBLE FOR ADDITIONAL LIGHTING SPECIFICATION INSTRUCTIONS• MUST BE CONTRACT QUALITY & SUITABLE FOR COMMERCIAL INSTALLATION.• FIXTURE MUST BE UL LISTED.• MANUFACTURER TO SUBMIT SHADE AND FINISH SAMPLES FOR DESIGNER APPROVAL.• INTERIOR DESIGNER IS NOT RESPONSIBLE FOR SUPPLYING OR INSTALLING LAMPS IN FIXTURES.• CONTRACTOR TO VERIFY FIXTURE WEIGHT AND COORDINATE STRUCTURAL REQUIREMENTS.• © 2018 CHAMPALIMAUD DESIGN LLC 115 BROADWAY, 2ND FLOOR NEW YORK, NY 10006 PHONE: 212-807-8869 WWW.CHAMPALIMAUDDESIGN.COM LT-304Page 1 DF1 05/23/2019 05/23/2019 60W 9W REPLACES Inc. TITANIUM LED SERIES 2.0 www.greencreative.com / info@greencreative.com - Tel / Fax: (866) 774-5433 - / GREENCREATIVELED / GClightingLED / GREEN CREATIVE TITANIUM LED CRISP SERIES 80% Energy Savings A19 9W DIM. WARRANTY YR 3 30,000 H PRO 89 92 A19 PRODUCT FEATURES DIMMABLE Exceptional color rendering CRI 92 Richer reds and natural skin tones (R9 70, R13 95) Tight LED binning for consistent CCT across all lamps High efficacy 89 LPW in Soft White Omnidirectional beam angle Suitable for use in totally enclosed fixtures ENCLOSEDENCLOSED This A19 is suitable for use in totally enclosed fixtures and capable of operating in a broad range of applications. Whether it is installed in fully enclosed flushmounts or sconces, this lamp’s advanced thermal design ensures optimal performance over the course of its lifetime. SEMI ENCLOSED** $147 Savings per lamp* TM 21 IES Suitable for Enclosed Fixtures 80 100 60 40 20 R1 R2 R3 R4 R5 R6 R7 R8 R9 R10 R11 R12 R13 R14 CRI CRI Values R1-R14 THE CRISP SERIES A19 9W lamp features a typical CRI 92, R9 70 and R13 95, providing crisp and vibrant colors across the whole spectrum. Its exceptional R9-R14 values (R9 & R13) provide redder reds, natural looking skin tones and whiter whites. In addition, this lamp's color temperatures fall within a 4-step Macadam ellipse to ensure minimal color deviation across lamps. Exceptional Color Rendering 28395 9A19DIM/927 DF1 05/23/2019 05/23/2019 General Lighting UplightingDownlighting APPLICATIONS *** List of tested dimmer switches available on website **** Suitable for damp locations. Not for use where directly exposed to weather or water * Savings per lamp based on $0.11 / kw energy cost, 12 hrs / day lamp usage, $2 incandescent with 1000-hr lifetime, $20 LED with 30,000-hr lifetime ** Suitable for use in totally enclosed fixtures SPECIFICATIONS Product Model Type Base Power (W) Voltage - Frequency Color Temp. (ANSI) CRI (Ra) (typ.) R9 / R13 (typ.) Typical lumens (lm) Efficacy (LPW) Beam Angle Dimmable Power Factor Rated Lifetime - L70 (hrs.) Dia. x MOL Weight (lb. / g) A19 E26 9 120V 60Hz Soft White 2700K 92 70 / 95 800 89 240° Yes*** 0.9 30,000 2.44"x4.45"(62x113mm) 0.25lb. / 113g 28395 9A19DIM/927 A19 9W DIM. TITANIUM LED CRISP SERIES Ref.#: DS230-A19-9W-230517DF1 05/23/2019 05/23/2019 HOLLY HUNT 801 WEST ADAMS STREET SUITE 700 CHICAGO IL 60607 T 800 320 3145 HOLLYHUNT.COM ALL DESIGNS ARE PROTECTED BY COPYRIGHT AND THE TRADEMARK LAWS OF THE U.S. 2018 HOLLY HUNT ENTERPRISES, INC.® HOLLY Â STUDIO ARIEL SCONCE DF2 05/23/2019 05/23/2019 HOLLY HUNT 801 WEST ADAMS STREET SUITE 700 CHICAGO IL 60607 T 800 320 3145 HOLLYHUNT.COM ALL DESIGNS ARE PROTECTED BY COPYRIGHT AND THE TRADEMARK LAWS OF THE U.S. 2017 HOLLY HUNT ENTERPRISES, INC.® PLEASE CONFIRM DETAILS OF THIS TEAR SHEET WITH YOUR LOCAL SALES ASSOCIATE 3.18 HOLLY Â STUDIO ALL PRICING REQUIRES A FORMAL QUOTE ARIEL SCONCE ARL-SCN DESIGN STEFAN GULASSA WIDTH: 6.5" 17 CM DEPTH: 3.5" 9 CM HEIGHT: 20" 51 CM U.L. LISTED/ CE LISTED Left and Right fixture to be ordered (as spec states). All install instructions and cut sheets are to be sent to the GC for review and approval of load and electrical requirements. DJ03/19/2019 This submittal has been reviewed by KGM for the General Design Concept as defined by our Lighting Design Documents and Specifications. This review shall not mean that KGM approves the detail design inherent in this shop drawing. Responsibility for which shall remain with the Contractor. The review of this submittal does not relieve the Contractor of responsibility for the accuracy or for compliance with the Contract Documents. No Exceptions Noted Date: 04/10/2019 Exceptions Noted Revise and Resubmit By: AF Kaplan Gehring McCarroll Architectural Lighting, Inc. El Segundo, California X DF2 05/23/2019 05/23/2019 HOLLY HUNT LIGHTING STEFAN GULASSA DESIGN Installation Instructions INSTALLATION MUST BE PERFORMED BY A QUALIFIED ELECTRICIAN PLEASE USE THE FOLLOWING DIAGRAM AND STEPS FOR INSTALLATION ARIEL SCONCE REV 6.13.14 CONTENTS (1) Ariel Back Plate (1) Ariel Front Cage (1) Ariel Shade (1) #8 Slotted Frame Set Screw (1) Mounting Plate (2) #8 Phillips Mounting Screws (2) Wall Anchors (2) #8 Phillips Wall Anchor Screws (2) Wire Nuts UL Approved in US and Canada.1/2NOTE: DO NOT OVER TIGHTEN SCREWS FRAME SET SCREW ARIEL SHADE ARIEL BACK PLATE WALL ANCHORS WALL ANCHOR SCREWS GROUND WIRE ARIEL FRONT CAGE SEE PAGE 2 FOR INSTRUCTIONS MOUNTING SCREWS ELECTRIC BOX SCREWS MOUNTING PLATE ELECTRIC WIRES ELECTRIC BOX WIRE NUTS MOUNTING HOLE MOUNTING HOLE 40 WATT CAUTION: RISK OF FIREMAX. TYPE B LAMP(S) CANDELABRA BASE KGM: PLEASE PROVIDE "LTB10F35027CB-90" DIMMABLE B10 LAMP WITH E12 BASE FROM ARCHIPELAGO, PLEASE SEE CUTSHEET ON PAGE 5 DF2 05/23/2019 05/23/2019 HOLLY HUNT LIGHTING STEFAN GULASSA DESIGN Installation Instructions INSTALLATION MUST BE PERFORMED BY A QUALIFIED ELECTRICIAN PLEASE USE THE FOLLOWING DIAGRAM AND STEPS FOR INSTALLATION ARIEL SCONCE REV 6.13.14 UL Approved in US and Canada.2/2NOTE: DO NOT OVER TIGHTEN SCREWS INSTRUCTIONS 1. Fasten Mounting Plate to Supported Electrical Box with Electric Box Screws (not included). 2. Remove Ariel Cage Frame & Shade from Ariel Back Plate by loosening Frame Set Screw at front top of Fixture. Pull down and out to separate. 3. Hold Ariel Back Plate in position and temporarily attach to Mounting Plate using included Mounting Screws. Mark wall at top/bottom Mounting Holes for placement of Wall Anchor Screws. 4. Remove Back Plate. Install included Wall Anchors. Make sure they are appropriate for wall material. 5. Make electrical connections with Wire Nuts; feed wires into Supported Electrical Box. Attach Ground Wire (if necessary). 6. Re-attach Ariel Back Plate using Mounting Screws & Wall Anchor Screws. 7. Screw in Bulbs (not included) and re-install Ariel Cage Frame & Shade using Frame Set Screw. SEE PAGE 1 FOR DIAGRAM AND CONTENTS O.A.H. 20-1/8” LINE OF WALL 10-3/4” 9-3/8” BACK PLATE 5-1/8” O.A.D. 3-1/2” BACK PLATE 11-1/8” CL 40 WATT CAUTION: RISK OF FIREMAX. TYPE B LAMP(S) CANDELABRA BASE KGM: PLEASE PROVIDE "LTB10F35027CB-90" DIMMABLE B10 LAMP WITH E12 BASE FROM ARCHIPELAGO, PLEASE SEE CUTSHEET ON PAGE 5 DF2 05/23/2019 05/23/2019 LTB10F35027CB-90 DF2 05/23/2019 05/23/2019 81 Franklin St, New York, NY 10013 studio@alliedmaker.com (212) 334-7333 ADA Aperture Sconce WAL-005 Metal Finish Options Available in any Allied Maker metal finish Glass Options Opal, Skytek This submittal has been reviewed by KGM for the General Design Concept as defined by our Lighting Design Documents and Specifications. This review shall not mean that KGM approves the detail design inherent in this shop drawing. Responsibility for which shall remain with the Contractor. The review of this submittal does not relieve the Contractor of responsibility for the accuracy or for compliance with the Contract Documents. No Exceptions Noted Date: 04/10/2019 Exceptions Noted Revise and Resubmit By: AF Kaplan Gehring McCarroll Architectural Lighting, Inc. El Segundo, California X DF3 05/23/2019 05/23/2019 81 Franklin St, New York, NY 10013 studio@alliedmaker.com (212) 334-7333 5.5in 0.9in 4in 11.25in 0.3in 10in DF3 05/23/2019 05/23/2019 Lamping 120V - E12 Base 240V - E14 Base Bulb Included G14 Tala Porcelain I 3W (24W Equivalent) LED 240 Total Lumen Output 2700K / 95 CRI E12 Base / Dimmable / 120 Volt 240V available upon request J-Box Requirements Fits all standard junction boxes with at least 1.25” depth Certifications cUL Damp locations Materials Machined Brass, Blown Glass 81 Franklin St, New York, NY 10013 studio@alliedmaker.com (212) 334-7333 Weight 3 lbs DF3 All fixtures must have an NRTL listing in USA, this is a Canadian listing 05/23/2019 05/23/2019 PLEASE PROVIDE "T-J-T-UNV-010-A-C-9-27-B" WITH "VLE-OPT120-001" DIFFUSED LENS PLEASE CONFIRM THAT GLASS SHADE IS REMOVABLE FOR MAINTENANCE UPON INSTALLATION This submittal has been reviewed by KGM for the General Design Concept as defined by our Lighting Design Documents and Specifications. This review shall not mean that KGM approves the detail design inherent in this shop drawing. Responsibility for which shall remain with the Contractor. The review of this submittal does not relieve the Contractor of responsibility for the accuracy or for compliance with the Contract Documents. No Exceptions Noted Date: 04/10/2019 Exceptions Noted Revise and Resubmit By: AF Kaplan Gehring McCarroll Architectural Lighting, Inc. El Segundo, California X DF4 05/23/2019 05/23/2019 10W (+/- 1W) 1065 lumens @ 4000K / 80 CRI 120° 80 (standard), 90 available (MTO) -35 to 50°C / -31°F to 122ºF L70: Tc max=80°C (Ts=85°C) / L90: Tc max=80°C (Ts=85°C) Input Power Max Lumen Output @ Full Power Beam Angle CRI Operating Temperature Range (Ta) Maximum Engine Case Temperature L70= >54,000 hours / L90= 17,000 hours Binning per ANSI C78.377-2015 @25°C; 3 SDCM 3.11" diameter x 0.71” H RoHS Compliant Estimated Lumen Maintenance (at Max Tc) Color Consistency Overall Size Weight Maximum Screw Installation Torque Safety/Compliance 5 years @ Max. Tc from the date of manufacture Warranty Leading Edge (TRIAC) or Trailing Edge (ELV) /100% ~ 10%Dimming Type/Range @120V ONLY >0.97 <20%THD Input PF DirectAC Engines: cURus (File # E486778) Dry and Damp Location MCPCBPCB Material High Voltage Barrier / 3mm Clear Polycarbonate 5VA Flame ratedProtective Lens/Enclosure >60,000 hours Electrolytic Capacitor Rating Lens Transmittance >92% Percent Flicker / Flicker Index <20% / DirectAC Retrofit Kits:  Integrated AC Direct Drive (No DC Driver)  Universal Voltage (120~277) AC Engine  Suitable for open or fully enclosed luminaires  Suitable for luminaires with plastic and glass lenses  All 90CRI product meets CEC Title 24 requirement  cULus Classified 1598C  cULus Recognized 8750  Energy Star Luminaire 2.0 Listed (for rebate programs)  Energy Star Luminaire CSD IC Over Temperature Control TATUNV010AxxxxA Operating Frequency 120Hz 62.6g / 0.13lbs. RFI/EMI Input Surge Test FCC Part 15B Consumer, EN55015 2.5kV Common and Differential mode (Per ES Ring Wave Test) Sound Rating / Noise A / <24 dBA <0.0416 Wire Type/ Length LED Quantity 40 Pcs. 18AWG / 12” Black and White wires 2 2 Lens: 90°C / 194°FMaximum Lens Temperature cULus (File # E486779) TJTUNV010AxxxxB Input Voltage / Frequency Input Current 2 2 ~0.084A @120V 120~277VAC (+/- 10%) / 50-60Hertz ~0.044A @230V ~0.036A @277V DirectAC UNV Retrofit Kit Engines General Specifications 60in-lb (960in-ozf) Packaging: Carton / Master Carton 20pcs / 160pcs Page 1 of 12 Fulham Co. Inc.: 12705 South Van Ness Ave., Hawthorne, CA 90250 Tel.: 1-323-779-2980 Fax.: 1-323-754-9060. Specifications subject to change without notice. order@fulham.com www.fulham.com 2017-738 Rev D Measured electrical data per UL file 2 Energy Star Luminaire 2.0 Listed See page #4 “Certification Chart” for exact models.1 1 1 Energy Star Luminaire CSD 1 1 TJTUNV010ACxxxB RoHS COMPLIANT PLEASE PROVIDE "T-J-T-UNV-010-A-C-9-27-B" WITH DIFFUSED LENS "VLE-OPT120-001 DF4 05/23/2019 05/23/2019 Part Number Matrix Electrical and Optical Specifications Luminous Flux De-Rating: CCT and CRI Multipliers 2700K 3000K 3500K 4000K 5000K 0.90 0.94 0.94 1.00 1.00 0.78 0.81 0.81 0.86 0.86 80(R9> 0) 90(R9>50) NOTES: Standard Product offering, in addition to 90CRI / 3000K (All other options are made to order with MOQ and lead time).3 LED Engine Retrofit Kit includes mounting hardware, retrofit labels, and installation instructions. 4 Input Power 010 = 10W 010 Material A=MCPCB+wire A Input Voltage UNV = 120V~277V UNV T = TRIAC/ ELV Dimming TTJ J= DirectAC Engine Retrofit Kit (Classified) Engine Type 4 C Shape C=Circular 8 CRI 8 = 80 9 = 90 3 Color Temperature 27 = 2700K 30 = 3000K 35 = 3500K 40 = 4000K 50 = 5000K 40 3 3 3 B Option B = DirectAC Engine +Lens (Retrofit Kit) 3 Color Temperature 3000K 4000K DirectAC Engine Part Number TJTUNV010ACx30B Input Power 10W 10W Nominal Luminous Flux @ 90 CRI 865 lumens 915 lumens Engine Efficacy @ 80 CRI 101 lm/W 107 lm/W Nominal Luminous Flux @ 80 CRI 1005 lumens 1065 lumensTJTUNV010ACx40B 2700K TJTUNV010ACx27B 5000K TJTUNV010ACx50B 10W 10W 1065 lumens 107 lm/W 96 lm/W Engine Efficacy @ 90 CRI 87 lm/W 92 lm/W 92 lm/W 83 lm/W825 lumens 915 lumens 955 lumens 3500K TJTUNV010ACx35B 10W 865 lumens 101 lm/W1005 lumens87 lm/W Page 2 of 12 Fulham Co. Inc.: 12705 South Van Ness Ave., Hawthorne, CA 90250 Tel.: 1-323-779-2980 Fax.: 1-323-754-9060. Specifications subject to change without notice. order@fulham.com www.fulham.com 2017-738 Rev D CRI CCT TJTUNV010ACxxxB RoHS COMPLIANT 3 1) DirectAC Engines standard model "B" comes with engine and lens. 2) Nominal luminous flux includes a 7.5% loss due to lens. Use a 1.075 multiplier when lens is removed. 3) Electrical and optical specifications are based on Tc mod = 25ºC. Reference Amb. Temp. vs Rel. Lum. Flux for other temperatures. 4) Specifications are subject to change without notice. 5) All 90CRI product meets CEC Title 24 requirement. DF4 05/23/2019 05/23/2019 Suitable for surface mounted luminaire with minimum dimensions or volume: 7.69” L x 7.69” W x 1.25” H or 73.87 cubic inches 5 1) Refer to LED Engine Retrofit Kit Installation Instructions for further detail. 2) This LED Engine Kit can retrofit any luminaire with a dimension/volume greater or equal to the minimum dimensions shown below and on the Installation Instructions. 3) This LED Engine Kit can be used with luminaires similar to the one illustrated on the Installation Instructions. NOTES: Module Case Temperature (T )c 30ºC 25ºC 35ºC 40ºC 45ºC 50ºC 55ºC 60ºC 65ºC 70ºC 75ºC 80ºC 85ºC 90ºC 95ºC 100ºC 1.000 1.000 0.991 0.972 0.963 0.953 0.944 0.935 Luminous Flux Multiplier 0.925 0.916 0.897 0.888 0.879 0.869 0.850 0.841 Thermal De-Rating: Tc vs. Luminous Flux Tc located on module Thermal Specifications Maximum Engine Case Temperature (Tc) Storage Temperature Range Operating Ambient Temperature Range L70: Tc max=80°C (Ts=85°C) / L90: Tc max=80°C (Ts=85°C) Maximum Lens Temperature -°C(-°F) to 100°C(212°F)35 31 -°C(-°F) to 0°C(22°F)35 31 5 1 DirectAC Engine Retrofit Kit (B) 5 °C (1 ºF)90 94 Page 3 of 12 Fulham Co. Inc.: 12705 South Van Ness Ave., Hawthorne, CA 90250 Tel.: 1-323-779-2980 Fax.: 1-323-754-9060. Specifications subject to change without notice. order@fulham.com www.fulham.com 2017-738 Rev D TJTUNV010ACxxxB RoHS COMPLIANT DF4 05/23/2019 05/23/2019 Certification Chart Energy Star™ TM-21 Calculator Data Product Image: 10W Round AC Engine Kit DirectAC UNV Retrofit Kit Engines: Hardware, Labels & Installation Instructions Tc Module Reported L70 Reported L90 50°C 80°C >54,000 Hrs 17,000 Hrs 100°C 37,000 Hrs 11,000 Hrs Tc Module Calculated L70 Calculated L90 50°C 80°C 55,000 Hrs 17,000 Hrs 100°C 37,000 Hrs 11,000 Hrs >54,000 Hrs >17,000 Hrs >55,000 Hrs >17,000 Hrs Classification Model RoHS COMPLIANT Listed CSD TJTUNV010ACxxxB TJT 010ACxxxBUNV YES YES (80/90CRI) TJTUNV010ACxxxB NOTES: 2) Energy Star Listed: https://www.energystar.gov/productfinder/product/certified-light-fixtures/results?scrollTo=342&search_text=fulham&fixture_type_isopen=&markets_filter=United+States &zip_code_filter=&product_types=Select+a+Product+Category&sort_by=light_output_lumens&sort_direction=asc&page_number=0&lastpage=0 https://www.energystar.gov/products/lighting_fans/certified_lighting_subcomponent_database_csd 1) Energy Star CSD: Page 4 of 12 Fulham Co. Inc.: 12705 South Van Ness Ave., Hawthorne, CA 90250 Tel.: 1-323-779-2980 Fax.: 1-323-754-9060. Specifications subject to change without notice. order@fulham.com www.fulham.com 2017-738 Rev D TATUNV010ACxxxA CAUTION: THIS LUMINAIRE HAS BEEN MODIFIED TO OPERATE LED LAMPS. DO NOT ATTEMPT TO INSTALL OR OPERATE FLUORESCENT LAMPS IN THIS LUMINAIRE. NOTICE - THIS LUMINAIRE HAS BEEN MODIFIED AND CAN NO LONGER OPERATE THE ORIGINALLY INTENDED LAMP. (WITH RESPECT TO FIRE AND SHOCK ONLY) FOR USE ONLY WITH PRODUCTS DESCRIBED AND INSTALLED IN ACCORDANCE WITH THE INSTRUCTION PROVIDED WITH THIS RETROFIT KIT. 6 10W 927 only listed for wall mount. All others are ceiling mount. 6 6YES (80/90CRI) TJTUNV010ACxxxB RoHS COMPLIANT DF4 05/23/2019 05/23/2019 Page 5 of 12 Fulham Co. Inc.: 12705 South Van Ness Ave., Hawthorne, CA 90250 Tel.: 1-323-779-2980 Fax.: 1-323-754-9060. Specifications subject to change without notice. order@fulham.com www.fulham.com 2017-738 Rev D Diameter Height 3.11” [78.99mm] 0.71” [18.03mm] Overall Dimensions Wire Length AC Input (Black / White) 12” [304.8mm] Exploded View LENS ENGINE Top View ø2.75" 35.0° 120.0° 130.0° ø.14" THRU 3X ø3.11" ø.51" Side View .71" .15" Mechanical Drawings (Scale 1 : 1) TJTUNV010ACxxxB RoHS COMPLIANT DF4 05/23/2019 05/23/2019 Page 6 of 12 Fulham Co. Inc.: 12705 South Van Ness Ave., Hawthorne, CA 90250 Tel.: 1-323-779-2980 Fax.: 1-323-754-9060. Specifications subject to change without notice. order@fulham.com www.fulham.com 2017-738 Rev D Accessories TJTUNV010ACxxxB RoHS COMPLIANT VLE-OPT120-001 (Diffused Lens)VLE-OPT120-001 (Diffused Lens) Top View Side View .71" 120.0° 130.0° 35.0° ø.14" THRU 3X ø.51" .15" ø3.11" Back Mounting for M4-.125 x 8mm Thread Forming Screws (x3) ø2.75" Lens 20g High Voltage Barrier • 3mm Diffused Polycarbonate 5VA Flame rated. • Lens Transmittance >75% • Lens Sold Separately • DF4 05/23/2019 05/23/2019 Fastening to Luminaire Electrostatic Sensitive Product (ESD) When installing by “mounting thru holes” (recommended), use any screw with diameter less than 0.13in. [3.4mm]. Mount on a flat surface and use all 3 mounting holes to ensure good contact between back side of Engine and mounting surface. Refer to max specified torque for installation. Suggested screw sizes: #5 or M3 Pan Head screw. • Fulham LED products should be handled with proper measures to protect against any potential ESD damage. When servicing, personnel should be ground and direct contact with LED should be avoided. • • Thermal Management Proper thermal management should be employed to ensure life and reliability of product.• Wiring IC Over Temperature Control Environmental Rating • • DirectAC Engines are rated for dry and damp locations. • • Intended for 120V application ONLY. Connect the Black wire from the DirectAC Engine to the building Line by using the proper connectors or wire nuts. Connect the White wire from the DirectAC Engine to the building/source Neutral by using the proper connectors or wire nuts. DirectAC Engine does not need grounding, but the luminaire must be grounded. • • Hi-Pot Testing (Caution) All DirectAC Engine models are Hi-Pot tested on the Fulham production line. We advise NOT to apply AC Hi-voltage Dielectric test to LED products as this may damage the sensitive electronic components as well as the LEDs. Please inspect the connection wires for any nicks or cuts in the insulation during and after installation. • DirectAC Engine models have built in Thermal management, if the unit experiences higher than normal ambient temperatures the circuit by design will reduce the drive current to the LED there by reducing the thermal impact on the LED's. A luminaire disconnect UL listed connector is included, as part of Fulham’s retrofit kit only, to meet Energy Star requirements. Use solid wire size 18AWG/12” per pole, rated at max 600V load and 105°C operating temperature. Strip wires to 11-13mm (0.47in.). Connector not for multiple use. For additional information on Wago's 873 Series Lumi-Nuts® connector, please visit: http://www.wago.com/infomaterial/wago_ebook/51261593/flipviewerxpress.html Termination Notes • • • L N Daisy Chain • • Guidelines Reduced Flicker Operation Feature • DirectAC Engine models have added circuitry to help reduce the Flicker when operated on the 50/60Hz power lines. The Flicker percentage on these models is below 30% when operated at line voltage, per CEC requirement. Dimming by line voltage devices may increase the Flicker percentage as the power levels are reduced. Page 7 of 12 Fulham Co. Inc.: 12705 South Van Ness Ave., Hawthorne, CA 90250 Tel.: 1-323-779-2980 Fax.: 1-323-754-9060. Specifications subject to change without notice. order@fulham.com www.fulham.com 2017-738 Rev D TJTUNV010ACxxxB RoHS COMPLIANT DF4 05/23/2019 05/23/2019 Color and Binning Optical Spectrum 1) The Color and Binning and Optical Spectrum charts are for reference only. For more detailed info, contact factory. 2) Reference Bridgelux 2835 GEN2 Series. Binning per ANSI C78.377-2015 @ 25°C; 3 SDCM. 3) The Optical Spectrum values vary depending on product type and color rank. NOTES: Page 8 of 12 Fulham Co. Inc.: 12705 South Van Ness Ave., Hawthorne, CA 90250 Tel.: 1-323-779-2980 Fax.: 1-323-754-9060. Specifications subject to change without notice. order@fulham.com www.fulham.com 2017-738 Rev D 7 SCDM Rectangle 3 SCDM Ellipse 0.3 0.31 0.32 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.45 0.46 0.47 0.48 0.49 0.3 0.31 0.32 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 5000 K 4000 K 3500K 3000K 2700K CIE, xCIE, y400 450 Wavelength (nm) 550500 600 800650700750Relative Radiant Power (%) 100% 80% 60% 40% 20% 0% 2700K 3000K 3500K 4000K 5000K 6500K TJTUNV010ACxxxB RoHS COMPLIANT DF4 05/23/2019 05/23/2019 Compatible Tested Dimmers (Contact Fulham for other alternatives) (TRIAC or ELV Dimmers) Page 9 of 12 Fulham Co. Inc.: 12705 South Van Ness Ave., Hawthorne, CA 90250 Tel.: 1-323-779-2980 Fax.: 1-323-754-9060. Specifications subject to change without notice. order@fulham.com www.fulham.com 2017-738 Rev D Model TypeManufacture NTLV-600 TRIAC (Leading Edge)Lutron IPL06-10Z TRIAC (Leading Edge)Leviton S-600 TRIAC (Leading Edge)Lutron LG-600P TRIAC (Leading Edge)Lutron RH703PTC TRIAC (Leading Edge) Incandescent Analog Legrand R62-6674-P0W CFL / LEDLeviton SI061BR-PTACore TRIAC (Leading Edge) Incandescent Analog R70-6631-1LWLeviton TRIAC (Leading Edge) Incandescent Analog 002-6633-PLWLeviton TRIAC (Leading Edge) Incandescent Analog SELV-303PLutron ELV (Trailing Edge) D-600RLutron TRIAC (Leading Edge) Incandescent Analog S-603PLutron TRIAC (Leading Edge) Incandescent Analog DDE06-BLZLeviton ELV (Trailing Edge) RDL06-10ZLeviton TRIAC (Leading Edge) CT-600PLutron TRIAC (Leading Edge) DV-600PLutron TRIAC (Leading Edge) TJTUNV010ACxxxB RoHS COMPLIANT DF4 05/23/2019 05/23/2019 DirectAC Engine Equivalency Chart TJTUNV010AC8xxB System Wattage Lumen Output # of Lamps Total Wattage EfficacyEngine/Kit Part Number Lumen Output Lamp Wattage CFL Style 10W DirectAC Engine/Kit (10W) 998 lm (4K/80CRI) Quad Triple 13W 13W 1 CFL 13W 775 lm 1 13W 59 lm/W 825 lm Efficacy 100 lm/W 63 lm/W 1) For reference only, several factors apply. NOTES: 2) Emergency systems are not UL classified for field installation. Page 10 of 12 Fulham Co. Inc.: 12705 South Van Ness Ave., Hawthorne, CA 90250 Tel.: 1-323-779-2980 Fax.: 1-323-754-9060. Specifications subject to change without notice. order@fulham.com www.fulham.com 2017-738 Rev D TJTUNV010ACxxxB RoHS COMPLIANT DF4 05/23/2019 05/23/2019 Flicker Test Data Summary (Test performed by third party lab using, Lutron S-600P dimmer) Page 11 of 12 Fulham Co. Inc.: 12705 South Van Ness Ave., Hawthorne, CA 90250 Tel.: 1-323-779-2980 Fax.: 1-323-754-9060. Specifications subject to change without notice. order@fulham.com www.fulham.com 2017-738 Rev D sec dBA sec Fraction of rated light output:21% 400 Hz Measurement Period: 19.55%0.67% Flicker Index:0.0416 No Filter 40 Hz 90 Hz 200 Hz 1000 Hz 13.05%16.16%17.14% 19.22.000 1.84% Noise: Recording Interval:4.00E-05 With Dimmer at 20% sec dBA sec Flicker Index:0.0312 Noise:19.3 18.00%0.48%0.81%9.90% Recording Interval:10% Measurement Period:2.000 12.56%12.88% No Filter 40 Hz 90 Hz 200 Hz 400 Hz 1000 Hz 4.00E-05 Fraction of rated light output: With Dimmer at Minimum Light Output sec dBA sec 100% Light Output Percent Amplitude Modulation No Filter 13.82% 40 Hz 90 Hz 200 Hz 400 Hz 1000 Hz 0.32%1.16% Measurement Period:2.000 4.00E-05 Flicker Index:0.0395 Recording Interval:Fraction of rated light output:100% 12.31%13.54%13.39% Noise:19.2 With Dimmer at 100% 20% Light Output Percent Amplitude Modulation Minimum Light Output Percent Amplitude Modulation TJTUNV010ACxxxB RoHS COMPLIANT DF4 05/23/2019 05/23/2019 Page 12 of 12 Fulham Co. Inc.: 12705 South Van Ness Ave., Hawthorne, CA 90250 Tel.: 1-323-779-2980 Fax.: 1-323-754-9060. Specifications subject to change without notice. order@fulham.com www.fulham.com 2017-738 Rev D Packaging L W H Carton Master Carton Twenty (20) LED AC Engine retrofit kits inside each carton.Eight (8) cartons inside each Master Carton. L W H 10.63”(270mm) OUTER DIMENSION 8.07”(205mm)5.12”(130mm) Gross Weight QUANTITY 3.75 lbs. (1.70kg)20pc. Net Weight 2.64 lbs. (1.20kg) L W H 22.05”(560mm) OUTER DIMENSION 11.57”(435mm)11.42”(290mm) Gross Weight QUANTITY 32.19 lbs. (14.6 kg)160pcs. Net Weight 21.16 lbs. (9.60 kg)HW LDESCRIPTION : 10W ROUND DIRECTAC ENGINE RETROFIT KIT TJTUNV010AC840B 20 CRI : 80CCT : 00K40Input : 120-277VAC, 50/60HzWarranty : 5 YearsRated Light Output : Lumens 1065Rated Light Source Life : 50,000 HoursD/C:C/N:N.W: Kgs. 1.20G.W: 1.70 Kgs. BOX SIZE : X2 X MM27005130wwfulhamcomSee Fulham Website (w ..) for compatible dimmers. B.N:MADE IN CHINA QUANTITY: 100%-1% 0 00 00000 00000 0 TJTUNV010ACxxxB RoHS COMPLIANT DF4 05/23/2019 05/23/2019 ALABASTER RECTANGULAR SCONCE 68090898ALLB 6.00"W 18.50"H 4.00"D -Shade is hand carved from solid alabaster -In Lacquered Burnished Brass -Frame crafted of brass -Rated for one 25W max. E26 base bulb -Bulb included -The use of an LED bulb is strongly recommended, as heat from an incandescent bulb can damage the alabaster shade -Dimmer switch compatible -Mounts vertically -Damp UL listed: suitable for use indoors, such as bathrooms, where it is subject to moisture -Not recommended for use outdoors -ADA compliant (not more than 4"D when installed) -Natural alabaster stone has wide variation in vein patterning and color; each piece is unique -Hardwire; professional installation required Description : : : 22.00 lbs#: Wipe with a soft dry cloth; avoid the use of all cleaners and abrasives, as they will damage the finish. Care Instructions 1 Year limited warranty: Subject to standards stated in the written Terms and Conditions Warranty Dimension Restoration Hardware Contract 15 Koch Rd, Ste K, Corte Madera, CA 94925 P: 877.945.6200 | F:415.945.4598 www.rh.com/contract 05/03/2019 DJ Lighting Designer to review and comment. DF5 05/23/2019 05/23/2019 DJ04/11/2019 PLEASE PROVIDE 2700K LED STRIP WITH CRI ABOVE 90, HIGH R9 AND TM30 REPORT OR USE ATTACHED AT THE END OF THE DOCUMENT This submittal has been reviewed by KGM for the General Design Concept as defined by our Lighting Design Documents and Specifications. This review shall not mean that KGM approves the detail design inherent in this shop drawing. Responsibility for which shall remain with the Contractor. The review of this submittal does not relieve the Contractor of responsibility for the accuracy or for compliance with the Contract Documents. No Exceptions Noted Date: 04/11/2019 Exceptions Noted Revise and Resubmit By: AF Kaplan Gehring McCarroll Architectural Lighting, Inc. El Segundo, California X DF6 05/23/2019 05/23/2019 SHOULD BE 0-10V CONTROL CABLE PLEASE PROVIDE DRIVER WITH 0-10V LOGARITHMIC DIMMING, PLEASE VERIFY THAT DRIVER IS COMPATIBLE WITH LED STRIP AND ABLE TO DIM FIXTURE DOWN TO 0.1% DF6 05/23/2019 05/23/2019 DF6 05/23/2019 05/23/2019 FLEX DC® 30 Specification Sheet 1130 Monterey Pass Rd, Monterey Park, CA 91754 213.250.6069 | customerservice@opticarts.com | www.opticarts.com Optic Arts reserves the right to modify this specification without prior notice. Last Modified: March 19, 2019 4:33 PM © Optic Arts 2018 1 of 16 FLEX DC® 30 is a high performance flexible LED fixture suitable for use in coves, under cabinets, in shelves, in-grade, and virtually anywhere a linear fixture is required. ELECTRICAL PHYSICAL PERFORMANCE Input Voltage Dimming Options Power Consumption Wire Size Certification 24VDC • PURE DC™ • MLV • 0-10V • DMX • Lutron (2-WIRE, 3-WIRE, EcoSystem) 3.0 Watts per foot 18AWG, 2 wire ETL - Conforms to UL Std. 2108; Certified to CSA Std. C22.2 No. 9.0. Closet Rated - Suitable for installation in the storage area of a clothes closet when used in Optic Arts® channel. Field Cuttable Operating Temperature Environment Maximum Run Length Dimensions (WxH) Every 1.97” -40° C (-40°F) to +70°C (+158°F) IP40 - Dry Location IP68 - Wet Location IP40: 32’, IP68: 32’ IP40 - 0.31” (8.0mm) x 0.12” (3.2mm) IP68 - 0.41” (10.4mm) x 0.18” (4.5mm) IP68 Endcaps - 0.50” (12.70mm) x 0.31” (7.87mm) CRI Lumen Maintenance Binning Tolerance Warranty 90+ 50,000 Hours +/- 100K 5 years 2000K (IP40 only) 2400K 2700K 3000K 3500K 4100K 6000K Amber 174.44 lm/ft 62.44 lm/Watt 230.22 lm/ft 76.74 lm/Watt 262.59 lm/ft 87.53 lm/Watt 265.65 lm/ft 88.55 lm/Watt 276.03 lm/ft 92.01 lm/Watt 286.77 lm/ft 95.59 lm/Watt 272.94 lm/ft 90.98 Im/Watt 72.00 lm/ft 27.00 lm/Watt LUMEN OUTPUT Note: Stated lumen values have a tolerance of +/- 10%. CL OSETRATED ACCESSORIES Mounting Clips Channels Connectors FLEXConfig-1 Accessories FLEXMNT.SIL.INT, FLEXMNT.SIL.EXT12 (pg. 8) Optic Arts® Channel (pg. 3-7) LC-I2P-M, LC-I2P-F, LC-O2P-F, LC-O2P-M (pg. 8) FLEXDC.PFC.02.08, FLEXDC.BSC.02.08, LO-18G-2C-W-72, LP-18G-2C-W-72, LO-18G-2C-W-SP, LP-18G-2C-W-SP (pg. 9) SERIES IP RATING VOLTAGE WATTAGE CONFIGURATION LENGTH FLEXDC 40 = IP40 - Dry Location 68 = IP68 - Wet Location 20 = 2000K (IP40 only) 24 = 2400K 27 = 2700K 30 = 3000K 35 = 3500K 41 = 4100K 60 = 6000K R = Red G = Green B = Blue A = Amber 24 = 24 VDC 30 = 3.0W FLC1 = FLEX Config 1 FLC2 = FLEX Config 2 FLC3 = FLEX Config 3 XX = Custom Length ++++++ COLOR PART NUMBER BUILDER FLEXDC-40-27-24-30 DF6 05/23/2019 05/23/2019 FLEX DC® 30 Specification Sheet 1130 Monterey Pass Rd, Monterey Park, CA 91754 213.250.6069 | customerservice@opticarts.com | www.opticarts.com Optic Arts reserves the right to modify this specification without prior notice. Last Modified: March 19, 2019 4:33 PM © Optic Arts 2018 2 of 16 OUTDOOR FLEX DC® 30INDOOR FLEX DC® 30 DIMENSIONS OUTDOOR DIMENSIONSINDOOR DIMENSIONS Width Height Width (Endcap) Height (Endcap) Max Run Length 0.42” (10.55mm) 0.19” (4.88mm) 0.50” (12.70mm) 0.32” (7.94mm) 32.00’ (6096.00mm) Width Height Cuttable Segment Length Pitch Length Max Run Length 0.32” (8.00mm) 0.10” (2.52mm) 1.97” (50.00mm) 0.32” (8.00mm) 32.00’ (9753.60mm) INDOOR FLEX DC® 30 OUTDOOR FLEX DC® 30 Specified Length~0.45” Specified Length~0.23”~0.13”0.32”1.97”0.50”0.42”0.10”0.32”0.19”0.32” *Encased in silicon DF6 05/23/2019 05/23/2019 FLEX DC® 30 Specification Sheet 1130 Monterey Pass Rd, Monterey Park, CA 91754 213.250.6069 | customerservice@opticarts.com | www.opticarts.com Optic Arts reserves the right to modify this specification without prior notice. Last Modified: March 19, 2019 4:33 PM © Optic Arts 2018 8 of 16 ACCESSORIES LC-I2P-M LC-I2P-F LC-O2P-F LC-O2P-M Indoor Lead Connector (Male) Indoor Lead Connector (Female)Outdoor Lead Connector (Female) Outdoor Lead Connector (Male) 0.47” (12.00mm)0.57”(14.40mm) 0.29” (7.40mm) 0.21” (5.40mm) 0.94” (23.90mm)0.77” (19.60mm) FLEX.ZIP FLEXMNT.SIL.INT FLEXMNT.SIL.EXT12 Strain Relief Clip Indoor Mounting Clip Outdoor Mounting Clip 0.77” (19.50mm) 1.08” (27.50mm) 1.24” (28.00mm) 0.55” (14.00mm) 0.19” (4.90mm)0.05” (1.30mm)0.28” (7.00mm)0.37” (9.50mm)0.24”(6.20mm)0.24”(6.00mm)Ø 0.74”(18.75mm) 1.72” (43.75mm) Ø 0.75” (19.00mm) 1.72” (43.75mm) DF6 05/23/2019 05/23/2019 FLEX DC® 30 Specification Sheet 1130 Monterey Pass Rd, Monterey Park, CA 91754 213.250.6069 | customerservice@opticarts.com | www.opticarts.com Optic Arts reserves the right to modify this specification without prior notice. Last Modified: March 19, 2019 4:33 PM © Optic Arts 2018 9 of 16 ACCESSORIES FLEXDC.BSC.02.08 LP-18G-2C-W-SP LO-18G-2C-W-72 LP-18G-2C-W-72 LO-18G-2C-W-SP Field installed FLEX Connect® butt splice - 2 Conductor for 8mm Strip 500’ box of Plenum rated wire for FLEX Connect® 6’ wire lead for FLEX Connect® (not in-wall rated) 6’ Plenum rated wire lead for FLEX Connect® 1000’ spool of wire for FLEX Connect® (not in-wall rated) 0.95” (24.35mm)0.50”(12.76mm)0.30” (7.75mm) Fits in all channel except: • CHS-R-1208 • CHS-R-1715 • CHC-S-1921 • CHSP-R-2970 • CHSP-S-1618 • CHSP-STEP-8142 • CHS-R-1208 • CHS-R-1715 • CHC-S-1921 • CHSP-R-2970 • CHSP-S-1618 • CHSP-STEP-8142 FLEXDC.PFC.02.08 0.96” (24.41mm)0.50”(12.76mm)0.30”(7.75mm) Fits in all channel except: Field installed FLEX Connect® power feed - 2 Conductor for 8mm Strip FLEXDC-PFC-HO-1208-SS-KIT FLEXDC-PFC-HO-1715-SS-KIT FLEX Connect® housing for CHS-S-1208 FLEX Connect® housing for CHS-S-1715 0.40”(10.16mm)0.65”(10.16mm)0.89” (22.61mm)0.89” (22.61mm) 1.39” (35.31mm)1.39”(35.31mm) DF6 05/23/2019 05/23/2019 FLEX DC® 30 Specification Sheet 1130 Monterey Pass Rd, Monterey Park, CA 91754 213.250.6069 | customerservice@opticarts.com | www.opticarts.com Optic Arts reserves the right to modify this specification without prior notice. Last Modified: March 19, 2019 4:33 PM © Optic Arts 2018 10 of 16 • Specify FLEXConfig-1 • Specify FLEX type and channel type • FLEX factory cut to length, but not terminated • One FLEX Connect® power feed connector and 6’ lead provided per FLEX run - Uncut rolls of lead wire can also be provided (see page 8 for part #) • Channel shipped uncut for field cutting. • Specify number of butt splices (not shown - see page 8) • IP68 not available in FLEXConfig-1 • JA8 2016 not available in FLEXConfig-1 • FLEXConfig-1 is quick ship if run lengths are provided at time of order. Take offs, if needed, will add lead time. • The below channels are NOT compatible with FLEX Connect®: • Specify FLEXConfig-2 • Specify FLEX type and channel type • Specify run lengths • IP68 only available in FLEXConfig-2 • If no config is specified, and run lengths are provided, FLEXConfig-2 will be used 1 3 6’ Wire Lead Standard Tape Cut to Length 6’ Wire Lead Packaged in Foam Sleeve & Labelled CONFIGURATION TYPES Cut To Length With Soldered Leads, Assemble On-Site 1, 2, 3 Pre-Assembled Factory Finished Fixtures 1, 2 • Specify FLEXConfig-3 • Fully assembled fixture • ETL stamped and listed as a fixture • 6.50’ max length • Standard 6’ power lead unless otherwise specified • The below channels CANNOT be factory assembled: 2 Channel Cut & LabelledFLEX Cut & Labelled 1. Due to the nature of the FLEX DC® product, specific lengths may not fall exactly on a cutting point. In this case, Optic Arts® will always cut to the smaller dimension unless otherwise specified. 2. Unless otherwise specified, channel is cut 15mm longer than FLEX DC®. 3. Some on-site assembly required. See installation guides for details. NOTES: Slim: • CHS-R-1208 • CHS-R-1715 Wide: • CHW-R-2010 • CHW-S-2027 • CHW-S-7532 • CHW-S-2623 • CHW-S-3030 •CHW-S-3561 Slim: • CHS-R-1208 • CHS-R-1715 • CHS-C-1616 • CHC-S-1921 Specialty: • CHSP-R-2970 • CHSP-S-1618 • CHSP-STEP-8142 No Wire Lead FLEX Uncut, Standard Product Labels Tape Cut to Length Channel Uncut FLEX cut to length with FLEX Connect® Power Feeds for Field Termination, Channel uncut for field cutting FLEX Connect® Connectors Wire Leads DF6 05/23/2019 05/23/2019 Revision:Project number:Fixture number:Created by:Format:Date:Total wattage:Dimming:IP rating:Protection class:Project name:Customer number:Fixture position:Electrical distribution network:Light sources:Ondřej Major 3.4.2019053 104 001-0518-PNY-386120V AC 60Hz3,15xMAX 9,6W/LEDSTRIP30WDALIDRY LOCATION ONLYIA410This submittal has been reviewed by KGM for theGeneral Design Concept as defined by our LightingDesign Documents and Specifications. This reviewshall not mean that KGM approves the detail designinherent in this shop drawing. Responsibility forwhich shall remain with the Contractor.The review of this submittal does not relieve theContractor of responsibility for the accuracy or forcompliance with the Contract Documents. No Exceptions Noted Date: 04/10/2019 Exceptions Noted Revise and Resubmit By: AFKaplan Gehring McCarroll Architectural Lighting, Inc.El Segundo, CaliforniaXPLEASE CORRECTIT TO 0-10VDIMMINGDIMMING SHOULDBE 0-10VDF05/23/201905/23/2019 FRONT VIEWPreciosa NumberApproximate WeightDimensionsCustomer NumberLocationProjectCreated by:Checked by:Scale / Sheet Size:This drawing is the property of PRECIOSA-LUSTRY a.s.Any re-production of this design without the written authorization ofPRECIOSA-LUSTRY a.s. is prohibited.RevisionsRevision No: Revision Date: Revised by:Date:Approved:Revise & Submit:Approved with comments: Rejected:Light Sources TypeTotal Wattage:Circuits:Dimming System:053 104 001 - 05LED Strip30W1DALI180kg [396lbs]422,5 x 279,5 x 6,5 cm166 1/4 x 110 x 2 1/2 inLT - 305---Little Nell, ColoradoTrokoz 01.04.2019BuriánNO SCALE00 --- ---FIXING DIAGRAMLayout suggested by Preciosa.Final layout may be re-definedby the Client.SHOULD BE 0-10VCONTROL CABLEDF05/23/201905/23/2019 1. 2. 3.Socket type & Material:Nominal feed: (V AC)Rated output: (W)Quantity light sources:Luminous intensity:Wires material & color:Life time: (hours)Dimmable: (YES/NO)Colour:Supplier:Total Wattage (W) :LED strip20VDC 9,6W3,15m900lmFEP / Transp.50.000hYESWARM WHITEBY PRECIOSA30WFRONT VIEW / SECTIONPreciosa NumberDesigned byCrystal TrimmingsGlass PartsMetal FinishApproximate WeightDimensionsCustomer NumberLocationProjectCreated by:Checked by:Scale / Sheet Size:This drawing is the property of PRECIOSA-LUSTRY a.s.Any re-production of this design without the written authorization ofPRECIOSA-LUSTRY a.s. is prohibited.RevisionsRevision No: Revision Date: Revised by:Date:Approved:Revise & Submit:Approved with comments: Rejected:Light Sources TypeSHOPDRAWING053 104 001 - 05---PRECIOSA - CRYSTALHand Blown GlassColor: AlabasterBronze180kg [396lbs]422,5 x 279,5 x 6,5 cm166 1/4 x 110 x 2 1/2 inLT - 305---Little Nell, ColoradoTrokoz 01.04.2019BuriánNO SCALE00 --- ---3D VIEWDETAIL OF GLASS PARTSSIDE VIEW / SECTIONBOTTOM VIEWDETAIL ABOTTOM VIEW OF CLUSTERDF05/23/201905/23/2019 Input characteristics Input voltage DC 12-28V Input current 8A max, irrespective of PSU voltage Output characteristics LED output load 8A max, irrespective of whether using one or both LED outputs LED output voltage 12V - 28V LED outputs 2 (UL Class 2) AUX output voltage equal to input voltage AUX output current 180mA @ 12V 90mA @ 24V AUX output power 2W Circuit protection To prevent excessive output current from damaging the LED driver, it is highly recommended to use circuit protection appropriate for your application’s nominal and inrush current requirements in combination with an OVP, OVC short circuit protected AC/DC adapter. Control characteristics Control channels 1 (210D/211D/212D) 2 (220D/222D) Dimming protocol DMX, DALI or 0-10V Dimming range 100%-0% Dimming method HydraDrive Dimming curve linear or logarithmic (LIN211D) 0-10V isolation to Line voltage input: 1500V (LIN211D) to LED output: 3750V (LIN211D) n.a. (210D, 212D, 220D, 222D) 0-10V current draw 0.6mA typically, 2mA max (211D) n.a. (210D, 212D, 220D, 222D) Product offering LINEARdrive 210D P/N: LIN210D1 LINEARdrive DC, 8A, 12-24VDC, DALI, 1 ballast, 2x LED outputs, constant voltage, plastic long LINEARdrive 220D P/N: LIN220D1 LINEARdrive DC, 8A, 12-24VDC, DALI, 2 ballasts, 2x LED outputs, constant voltage, plastic long LINEARdrive 211D P/N: LIN211D1 LINEARdrive DC, 8A, 12-24VDC, 0-10V, 1 control channel, 2x LED outputs, constant voltage, plastic long LINEARdrive 212D P/N: LIN212D1 LINEARdrive DC, 8A, 12-24VDC, DMX, 1 control channel, 2x LED outputs, constant voltage, plastic long LINEARdrive 222D P/N: LIN222D1 LINEARdrive DC, 8A, 12-24VDC, DMX, 2 control channels, 2x LED outputs, constant voltage, plastic long Order number configuration P/N: for LED driver part number, see 'Product offering' above. Dimming curve: enter "LIN" for linear or "LOG" for logarithmic dimming curve. Applies to LIN211D1 only. 8A DMX/DALI Full-Colour Dimmable LED Drivers P/N Dimming curve Datasheet LINEARdrive 200W © 2016 eldoLED. All rights reserved. V2.4 All content contained herein is subject to change without prior notice. More product documentation and eldoLED's warranty and terms and conditions are available at www.eldoLED.com. PLEASE PROVIDE LINEARDRIVER 211D: "LIN211D1-LOG" 0-10V CONSTANT VOLTAGE DRIVER WITH LOGARITHMIC DIMMING, PLEASE VERIFY THAT DRIVER IS COMPATIBLE WITH LED STRIP AND ABLE TO DIM FIXTURE DOWN TO 0.1% DF 05/23/2019 05/23/2019 Dimensions, weight and packaging LINEARdrive 200 series LxWxH 153x50x23mm / 6.02x1.97x0.91in Weight 120 g / 4.2 oz Items per carton 12 pcs Standards and certifications Standards compliance EN 61347 LIN210D/LIN220D: 62386-101/102/207 RoHS RoHS2 UL, Recognized Component UL 1310, UL 8750 (Class 2 output) Certifications Wiring Specifications Wire type AWG 24-16, 0.2-1.5mm² Wire strip length 9mm / 0.35in Wiring diagrams LINEARdrive 210D, 220D LINEARdrive 211D LINEARdrive 212D, 222D Thermal specification Ta operating range -20 ºC ... +50 ºC / -4 ºF ... +122 ºF Tc max 65 ºC / 149 ºF Datasheet LINEARdrive 200W Europe, Rest of World eldoLED B.V.Science Park Eindhoven 5125 5692 ED Son The Netherlands E: sales@eldoLED.com North America eldoLED America One Lithonia Way Conyers, GA 30012 USA E: nasales@eldoLED.com DF 05/23/2019 05/23/2019 40W Constant Voltage + Constant Current LED Driver HLG-40H series ■ ■ current output. HLG-40H operates from 90 305VAC and offers models with different rated voltage ranging～ between 12V and 54V. Thanks to the high efficiency up to 89.5%, with the fanless design, the entire series is able to operate for -40 ~ +80℃℃case temperature under free air convection. The design of metal housing and IP67/IP65 ingress protection level allows this series to fit both indoor and outdoor applications.HLG-40H is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for LED lighting system. Metal housing with class designI •Ⅰ ■■ File Name:HLG-40H-SPEC 2018-09-30 IP65 IP67 Bauar Sicherheit egel gema t gepruft od be www.ID 2000000000 tuv.com wac g os I I B D I (except forAB-type) DF 05/23/2019 05/23/2019 40W Constant Voltage + Constant Current LED Driver HLG-40H series SPECIFICATION MODEL DC VOLTAGE RATED CURRENT RATED POWER OUTPUT VOLTAGEADJ. RANGE CURRENTADJ. RANGE LINE REGULATION LOAD REGULATION SETUP, RISE TIME Note.6 HOLD UPTIME (Typ.) VOLTAGE RANGE Note.5 FREQUENCYRANGE POWER FACTOR (Typ.) EFFICIENCY(Typ.) AC CURRENT (Typ.) INPUT INRUSH CURRENT(Typ.) MAX. No. of PSUs on 16A CIRCUIT BREAKER LEAKAGE CURRENT SAFETYSTANDARDS Note.8 WORKING TEMP. WORKING HUMIDITY STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION MTBF DIMENSIONOTHERS NOTE PACKING OVER CURRENT OVER VOLTAGE OVER TEMPERATURE Adjustable forA/AB-Type only (via built-in potentiometer) Adjustable forA/AB-Type only (via built-in potentiometer) 47 ~ 63Hz 0.43A/ 115VAC 0.24A/ 230VAC 0.23A/ 277VAC <0.75mA/ 277VAC 95 ~ 108% Constant current limiting, recovers automatically after fault condition is removed 20 ~ 95% RH non-condensing -40 ~ +80 , 10 ~ 95% RH℃ ±℃℃0.03%/ (0 ~ 60 ) 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X,Y, Z axes 1131.9K hrs min. Telcordia SR-332 (Bellcore) ; 336.5K hrs min. MIL-HDBK-217F (25 )℃ 171*61.5*36.8mm (L*W*H) 0.73Kg; 20pcs/15.6Kg/0.9CUFT Shut down o/p voltage, re-power on to recover RIPPLE & NOISE (max.)Note.2 VOLTAGE TOLERANCE Note.3 ENVIRONMENT SAFETY& EMC PROTECTION Shut down o/p voltage, re-power on to recover WITHSTAND VOLTAGE ISOLATION RESISTANCE I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH℃ CONSTANT CURRENT REGION Note.4 18 ~ 24V15 ~ 21V 23 ~ 30V 28 ~ 35V 35 ~ 43V 41 ~ 49V 48 ~ 58V 59 ~ 68V54 ~ 65V 86.5%86.5%88%88%88.5%88.5%89.5%88.5% 89.5% ±2.5% 2 ~ 3.33A ±2.0% 1.6 ~ 2.67A ±1.0% 1.2 ~ 2A ±1.0% 1 ~ 1.67A ±1.0% 0.8 ~ 1.34A ±1.0% 0.67 ~ 1.12A ±1.0% 0.5 ~ 0.84A ±0.5%±0.5%±0.5%±0.5%±0.5%±0.5%±0.5% ±2.0%±1.5%±1.0%±0.5%±0.5%±0.5%±0.5% ±1.0% 0.45 ~ 0.75A ±0.5% ±0.5% ±1.0% 0.58 ~ 0.96A ±0.5% ±0.5% 12V HLG-40H-12 HLG-40H-15 HLG-40H-20 HLG-40H-24 HLG-40H-30 HLG-40H-36 HLG-40H-42 HLG-40H-48 HLG-40H-54 7.2 ~12V 15V 9 ~ 15V 20V 12 ~ 20V 24V 14.4 ~ 24V 30V 18 ~ 30V 36V 21.6 ~ 36V 48V 28.8 ~ 48V 3.33A 2.67A 2A 1.67A 1.34A 1.12A 0.84A 39.96W 40.05W 40W 40.08W 40.2W 40.32W 40.32W 150mVp-p 150mVp-p 13.5 ~ 17V 150mVp-p 17 ~ 22V 200mVp-p 22 ~ 27V 200mVp-p 27 ~ 33V 200mVp-p 33 ~ 40V 300mVp-p 44 ~ 53V10.8 ~ 13.5V 54V 32.4 ~ 54V 0.75A 40.5W 300mVp-p 49 ~ 58V 42V 25.2 ~ 42V 0.96A 40.32W 200mVp-p 40 ~ 46V Compliance to EN55015, EN61000-3-2 Class C ( 60%) ; EN61000-3-3,GB17743 and GB17625.1, EACTPTC 020≧@ load EMC IMMUNITY EMC EMISSION Note.8 SHORT CIRCUIT Hiccup mode, recovers automatically after fault condition is removed COLD START 50A(t =210 s measured at 50% I ) at 230VAC;width peak Per NEMA410 12 units (circuit breaker of type B) / 20 units (circuit breaker of type C) at 230VAC μ TOTALHARMONIC DISTORTION 16ms / 115VAC, 230VAC 500ms,80ms/115VAC 500ms,80ms/230VAC THD< 20% (@ load 60% / 115VAC,230VAC; @ load 75% / 277VAC)≧≧ (Please refer to TOTALHARMONIC DISTORTION (THD) section)"" 90 ~ 305VAC 127 ~ 431VDC (Please refer to "STATIC CHARACTERISTIC" section) PF 0.98/115VAC, PF 0.95/230VAC, PF 0.92/277VAC @ full load≧≧≧ (Please refer to " " section)POWER FACTOR (PF) CHARACTERISTIC MAX. CASE TEMP.Tcase=+80℃ Tcase=-40 ~ +80℃(Please refer to "OUTPUTLOAD vsTEMPERATURE" section) ℃ ℃ ℃℃ File Name:HLG-40H-SPEC 2018-09-30 UL8750(type”HL”), CSAC22.2 No. 250.0-08 , independent ,EN/AS/NZS 61347-1,EN/AS/NZS 61347-2-13 GB19510.1,GB19510.14,EACTPTC 004,KC61347 1 KC61347 2 13 IP65 or IP67 approved ;- , - - (except forAB-type), optional models for J61347-1 J61347-2-13, ; design refer to UL60950-1,TUV EN60950-1, EN60335-1 Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, EN55024, light industry level (surge immunity Line-Earth 4KV, Line-Line 2KV), EACTPTC 020 DF 05/23/2019 05/23/2019 BLOCK DIAGRAM Fosc : 100KHz In the constant current region, the highest voltage at the output of the driver depends on the configuration of the end systems. Should there be any compatibility issues, please contact MEAN WELL. DRIVING METHODS OF LED MODULE 40W Constant Voltage + Constant Current LED Driver HLG-40H series Typical output current normalized by rated current (%) ※This series is able to work in either Constant Current mode (a direct drive way) or Constant Voltage mode (usually through additional DC/DC driver) to drive the LEDs. DIM+ (BType) DIM- DETECTION PWM & PFC CIRCUIT O.L.P.O.T.P. EMI FILTER RECTIFIERS POWER SWITCHING FILTER & RECTIFIERS +V -VI/P FG CONTROL O.V.P. & O.L.P. PFC CIRCUIT Vo(%)100 60 50 100 (min.) Io (%) Constant Current area Hiccup Protection Constant Voltage area (A)(B) (C) File Name:HLG-40H-SPEC 2018-09-30 DF 05/23/2019 05/23/2019 DIMMING OPERATION 40W Constant Voltage + Constant Current LED Driver HLG-40H series ◎Applying additive 1 ~ 10VDC ◎Applying additive 10V PWM signal (frequency range 100Hz ~ 3KHz): ◎Applying additive resistance: +V -V DIM+ DIM- ++ + -- - “DO NOTconnect "DIM- to -V" Additive Voltage +V -V DIM+ DIM- ++ -- “DO NOTconnect "DIM- to -V" Additive PWM signal +V -V DIM+ DIM- ++ -- “DO NOTconnect "DIM- to -V" Additive Resistance 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%Output current (%)10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%Output current (%)10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 10K/NOutput current (%)20K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N Dimming input:Additive voltage Duty cycle of additive 10V PWM signal dimming input (N=driverquantityforsynchronizeddimming operation) Dimming input:Additive resistance ※3 in 1 dimming function (for B/AB-Type) Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-: 1 ~ 10VDC, or 10V PWM signal or resistance. Direct connecting to LEDs is suggested. It is not suitable with additional drivers.to be used Dimming source current from power supply: 1 0 A(typ.)0 μ FG (Green/Yellow) AC/L(Brown) AC/N(Blue) -V(Black) +V(Red) DIM-(White) DIM+(Blue) HLG-40H File Name:HLG-40H-SPEC 2018-09-30 DF 05/23/2019 05/23/2019 40W Constant Voltage + Constant Current LED Driver HLG-40H series Note: In the case of turning the lighting fixture down to 0% brightness, please refer to the configuration as follow, or please contact MEAN WELL for other options. Using a switch and relay can turn ON/OFF the lighting fixture. NFG L Relay Blue Brown Green/ Yellow AC/L AC/N HLG-40H B-Type DIM+ DIM- V(-) V(+) Blue White Red Switch Adjuster 10K/N~100K/N Ohms resistance 1~10V DC Voltage 10V PWM Signal LED Lighting Fixture Black File Name:HLG-40H-SPEC 2018-09-30 DF 05/23/2019 05/23/2019 0 5 10 15 20 25 50% 60% 70% 80% 90% 100% 277VAC 230VAC 115VAC 70 72 74 76 78 80 82 84 86 88 90 92 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 277VAC 230VAC 115VAC 0.85 0.86 0.87 0.88 0.89 0.9 0.91 0.92 0.93 0.94 0.95 0.96 0.97 0.98 0.99 1 50% 60% 70% 80% 90% 100% 277VAC 230VAC 115VAC (40W)PFLOAD Constant Current Mode POWER FACTOR(PF) CHARACTERISTIC OUTPUT LOAD vs TEMPERATURE(Note.10) STATIC CHARACTERISTICS ※Tcase at 70℃ LOADLOADEFFICIENCY(%)HLG-40H series possess superior working efficiency that up to 89.5% can be reached in field applications. TOTALHARMONIC DISTORTION (THD) ※48V Model,Tcase at 70℃THD(%)※48V Model,Tcase at 70℃ 40W Constant Voltage + Constant Current LED Driver HLG-40H series INPUT VOLTAGE (V) 60Hz 90 100 125 135 145 155 165 175 180 200 230 305 100 90 80 70 60 50 40LOAD (%)※De-rating is needed under low input voltage. EFFICIENCYvs LOAD 230VAC Input only AMBIENT TEMPERATURE,Ta ( )℃LOAD (%)-40 -25 0-10 15 30 50 60 70 20 40 60 80 100 (HORIZONTAL)LOAD (%)(HORIZONTAL)-40-250 204555657580 20 40 60 80 100 Tcase ( )℃ 230VAC Input only File Name:HLG-40H-SPEC 2018-09-30 DF 05/23/2019 05/23/2019 LIFETIME 40W Constant Voltage + Constant Current LED Driver HLG-40H series 0 20 40 60 80 100 120 25 30 35 40 45 50 55 60 65 70 75 80LIFETIME(Kh)Tcase ( )℃ File Name:HLG-40H-SPEC 2018-09-30 DF 05/23/2019 05/23/2019 Case No.957B Unit:mm ※A-Type ※Blank/D-Type tc tc : Max. CaseTemperature : Max. CaseTemperature tc tc 40W Constant Voltage + Constant Current LED Driver HLG-40H series MECHANICALSPECIFICATION 300 20± FG (Green/Yellow) AC/L(Brown) AC/N(Blue) ψ×4.2 4PL 300 20± 9.6 11.9 147.2 171 61.546.53273.6 30.7536.8300 20± FG (Green/Yellow) AC/L(Brown) AC/N(Blue) ψ×4.2 4PL 300 20± Io Vo ADJ ADJ 9.6 11.9 147.2 171 61.546.53273.6 30.7536.8SJOW 17AWG&05RN-F 1.0mm *2C 2 -V(Black) +V(Red) SJOW 17AWG&05RN-F 1.0mm *2C 2 -V(Black) +V(Red) File Name:HLG-40H-SPEC 2018-09-30 SJOW 17AWG&H05RN-F 1.0mm *3C 2 SJOW 17AWG&H05RN-F 1.0mm *3C 2 DF 05/23/2019 05/23/2019 40W Constant Voltage + Constant Current LED Driver HLG-40H series File Name:HLG-40H-SPEC 2018-09-30 ※B-Type tc : Max. CaseTemperaturetc 300 20± FG (Green/Yellow) AC/L(Brown) AC/N(Blue) 9.6 11.9 147.2 171 61.546.532ψ×4.2 4PL 300 20± 73.6 30.7536.8-V(Black) +V(Red) DIM-(White) DIM+(Blue) SJOW 17AWG&05RN-F 1.0mm *2C 2 ※AB-Type tc : Max. CaseTemperaturetc 300 20± FG (Green/Yellow) AC/L(Brown) AC/N(Blue) 9.6 11.9 147.2 171 61.546.532ψ×4.2 4PL 300 20± 73.6 30.7536.8SJOW 17AWG&H05RN-F 1.0mm *3C 2 -V(Black) +V(Red)SJOW 17AWG&05RN-F 1.0mm *2C 2 Io Vo ADJ ADJ UL2517 20AWG*2C DIM-(White) DIM+(Blue)UL2517 20AWG*2C SJOW 17AWG&H05RN-F 1.0mm *3C 2 DF 05/23/2019 05/23/2019 40W Constant Voltage + Constant Current LED Driver HLG-40H series Please refer to : http://www.meanwell.com/manual.html INSTALLATION MANUAL ※Waterproof connector Waterproof connector can be assembled on the output cable of HLG-40H to operate in dry/wet/damp or outdoor environment. HLG-40H I/P O/P LED Lamp AC source ※Cable Joiner Pin Configuration (Female) Pin Configuration (Female)Size Size M12 M154-PIN 5A/PIN M12-04Order No. Order No. 10Amax.Suitable Current Suitable Current 5-PIN 5A/PIN M12-05 10Amax. 2-PIN 12A/PIN M15-02 12Amax. Up to four wires can be connected through this cable joiner by soldering or clamping by tools. 66 26 20 ψ25O/PWires LED Lamp HLG-40H WATERPROOF CONNECTION CJ04-2 suitable for 18AWG~22AWG CJ04-1 suitable for 14AWG~16AWG CJ04 cable joiner can be purchased independently for user's own assembly.◎ MEAN WELLorder No. : CJ04-1, CJ04-2. File Name:HLG-40H-SPEC 2018-09-30 DF 05/23/2019 05/23/2019 FLEX DC® 30 Specification Sheet 1130 Monterey Pass Rd, Monterey Park, CA 91754 213.250.6069 | customerservice@opticarts.com | www.opticarts.com Optic Arts reserves the right to modify this specification without prior notice. Last Modified: March 19, 2019 4:33 PM © Optic Arts 2018 1 of 16 FLEX DC® 30 is a high performance flexible LED fixture suitable for use in coves, under cabinets, in shelves, in-grade, and virtually anywhere a linear fixture is required. ELECTRICAL PHYSICAL PERFORMANCE Input Voltage Dimming Options Power Consumption Wire Size Certification 24VDC • PURE DC™ • MLV • 0-10V • DMX • Lutron (2-WIRE, 3-WIRE, EcoSystem) 3.0 Watts per foot 18AWG, 2 wire ETL - Conforms to UL Std. 2108; Certified to CSA Std. C22.2 No. 9.0. Closet Rated - Suitable for installation in the storage area of a clothes closet when used in Optic Arts® channel. Field Cuttable Operating Temperature Environment Maximum Run Length Dimensions (WxH) Every 1.97” -40° C (-40°F) to +70°C (+158°F) IP40 - Dry Location IP68 - Wet Location IP40: 32’, IP68: 32’ IP40 - 0.31” (8.0mm) x 0.12” (3.2mm) IP68 - 0.41” (10.4mm) x 0.18” (4.5mm) IP68 Endcaps - 0.50” (12.70mm) x 0.31” (7.87mm) CRI Lumen Maintenance Binning Tolerance Warranty 90+ 50,000 Hours +/- 100K 5 years 2000K (IP40 only) 2400K 2700K 3000K 3500K 4100K 6000K Amber 174.44 lm/ft 62.44 lm/Watt 230.22 lm/ft 76.74 lm/Watt 262.59 lm/ft 87.53 lm/Watt 265.65 lm/ft 88.55 lm/Watt 276.03 lm/ft 92.01 lm/Watt 286.77 lm/ft 95.59 lm/Watt 272.94 lm/ft 90.98 Im/Watt 72.00 lm/ft 27.00 lm/Watt LUMEN OUTPUT Note: Stated lumen values have a tolerance of +/- 10%. CL OSETRATED ACCESSORIES Mounting Clips Channels Connectors FLEXConfig-1 Accessories FLEXMNT.SIL.INT, FLEXMNT.SIL.EXT12 (pg. 8) Optic Arts® Channel (pg. 3-7) LC-I2P-M, LC-I2P-F, LC-O2P-F, LC-O2P-M (pg. 8) FLEXDC.PFC.02.08, FLEXDC.BSC.02.08, LO-18G-2C-W-72, LP-18G-2C-W-72, LO-18G-2C-W-SP, LP-18G-2C-W-SP (pg. 9) SERIES IP RATING VOLTAGE WATTAGE CONFIGURATION LENGTH FLEXDC 40 = IP40 - Dry Location 68 = IP68 - Wet Location 20 = 2000K (IP40 only) 24 = 2400K 27 = 2700K 30 = 3000K 35 = 3500K 41 = 4100K 60 = 6000K R = Red G = Green B = Blue A = Amber 24 = 24 VDC 30 = 3.0W FLC1 = FLEX Config 1 FLC2 = FLEX Config 2 FLC3 = FLEX Config 3 XX = Custom Length ++++++ COLOR PART NUMBER BUILDER FLEXDC-40-27-24-30 DF 05/23/2019 05/23/2019 FLEX DC® 30 Specification Sheet 1130 Monterey Pass Rd, Monterey Park, CA 91754 213.250.6069 | customerservice@opticarts.com | www.opticarts.com Optic Arts reserves the right to modify this specification without prior notice. Last Modified: March 19, 2019 4:33 PM © Optic Arts 2018 2 of 16 OUTDOOR FLEX DC® 30INDOOR FLEX DC® 30 DIMENSIONS OUTDOOR DIMENSIONSINDOOR DIMENSIONS Width Height Width (Endcap) Height (Endcap) Max Run Length 0.42” (10.55mm) 0.19” (4.88mm) 0.50” (12.70mm) 0.32” (7.94mm) 32.00’ (6096.00mm) Width Height Cuttable Segment Length Pitch Length Max Run Length 0.32” (8.00mm) 0.10” (2.52mm) 1.97” (50.00mm) 0.32” (8.00mm) 32.00’ (9753.60mm) INDOOR FLEX DC® 30 OUTDOOR FLEX DC® 30 Specified Length~0.45” Specified Length~0.23”~0.13”0.32”1.97”0.50”0.42”0.10”0.32”0.19”0.32” *Encased in silicon DF 05/23/2019 05/23/2019 FLEX DC® 30 Specification Sheet 1130 Monterey Pass Rd, Monterey Park, CA 91754 213.250.6069 | customerservice@opticarts.com | www.opticarts.com Optic Arts reserves the right to modify this specification without prior notice. Last Modified: March 19, 2019 4:33 PM © Optic Arts 2018 8 of 16 ACCESSORIES LC-I2P-M LC-I2P-F LC-O2P-F LC-O2P-M Indoor Lead Connector (Male) Indoor Lead Connector (Female)Outdoor Lead Connector (Female) Outdoor Lead Connector (Male) 0.47” (12.00mm)0.57”(14.40mm) 0.29” (7.40mm) 0.21” (5.40mm) 0.94” (23.90mm)0.77” (19.60mm) FLEX.ZIP FLEXMNT.SIL.INT FLEXMNT.SIL.EXT12 Strain Relief Clip Indoor Mounting Clip Outdoor Mounting Clip 0.77” (19.50mm) 1.08” (27.50mm) 1.24” (28.00mm) 0.55” (14.00mm) 0.19” (4.90mm)0.05” (1.30mm)0.28” (7.00mm)0.37” (9.50mm)0.24”(6.20mm)0.24”(6.00mm)Ø 0.74”(18.75mm) 1.72” (43.75mm) Ø 0.75” (19.00mm) 1.72” (43.75mm) DF 05/23/2019 05/23/2019 FLEX DC® 30 Specification Sheet 1130 Monterey Pass Rd, Monterey Park, CA 91754 213.250.6069 | customerservice@opticarts.com | www.opticarts.com Optic Arts reserves the right to modify this specification without prior notice. Last Modified: March 19, 2019 4:33 PM © Optic Arts 2018 9 of 16 ACCESSORIES FLEXDC.BSC.02.08 LP-18G-2C-W-SP LO-18G-2C-W-72 LP-18G-2C-W-72 LO-18G-2C-W-SP Field installed FLEX Connect® butt splice - 2 Conductor for 8mm Strip 500’ box of Plenum rated wire for FLEX Connect® 6’ wire lead for FLEX Connect® (not in-wall rated) 6’ Plenum rated wire lead for FLEX Connect® 1000’ spool of wire for FLEX Connect® (not in-wall rated) 0.95” (24.35mm)0.50”(12.76mm)0.30” (7.75mm) Fits in all channel except: • CHS-R-1208 • CHS-R-1715 • CHC-S-1921 • CHSP-R-2970 • CHSP-S-1618 • CHSP-STEP-8142 • CHS-R-1208 • CHS-R-1715 • CHC-S-1921 • CHSP-R-2970 • CHSP-S-1618 • CHSP-STEP-8142 FLEXDC.PFC.02.08 0.96” (24.41mm)0.50”(12.76mm)0.30”(7.75mm) Fits in all channel except: Field installed FLEX Connect® power feed - 2 Conductor for 8mm Strip FLEXDC-PFC-HO-1208-SS-KIT FLEXDC-PFC-HO-1715-SS-KIT FLEX Connect® housing for CHS-S-1208 FLEX Connect® housing for CHS-S-1715 0.40”(10.16mm)0.65”(10.16mm)0.89” (22.61mm)0.89” (22.61mm) 1.39” (35.31mm)1.39”(35.31mm) DF 05/23/2019 05/23/2019 FLEX DC® 30 Specification Sheet 1130 Monterey Pass Rd, Monterey Park, CA 91754 213.250.6069 | customerservice@opticarts.com | www.opticarts.com Optic Arts reserves the right to modify this specification without prior notice. Last Modified: March 19, 2019 4:33 PM © Optic Arts 2018 10 of 16 • Specify FLEXConfig-1 • Specify FLEX type and channel type • FLEX factory cut to length, but not terminated • One FLEX Connect® power feed connector and 6’ lead provided per FLEX run - Uncut rolls of lead wire can also be provided (see page 8 for part #) • Channel shipped uncut for field cutting. • Specify number of butt splices (not shown - see page 8) • IP68 not available in FLEXConfig-1 • JA8 2016 not available in FLEXConfig-1 • FLEXConfig-1 is quick ship if run lengths are provided at time of order. Take offs, if needed, will add lead time. • The below channels are NOT compatible with FLEX Connect®: • Specify FLEXConfig-2 • Specify FLEX type and channel type • Specify run lengths • IP68 only available in FLEXConfig-2 • If no config is specified, and run lengths are provided, FLEXConfig-2 will be used 1 3 6’ Wire Lead Standard Tape Cut to Length 6’ Wire Lead Packaged in Foam Sleeve & Labelled CONFIGURATION TYPES Cut To Length With Soldered Leads, Assemble On-Site 1, 2, 3 Pre-Assembled Factory Finished Fixtures 1, 2 • Specify FLEXConfig-3 • Fully assembled fixture • ETL stamped and listed as a fixture • 6.50’ max length • Standard 6’ power lead unless otherwise specified • The below channels CANNOT be factory assembled: 2 Channel Cut & LabelledFLEX Cut & Labelled 1. Due to the nature of the FLEX DC® product, specific lengths may not fall exactly on a cutting point. In this case, Optic Arts® will always cut to the smaller dimension unless otherwise specified. 2. Unless otherwise specified, channel is cut 15mm longer than FLEX DC®. 3. Some on-site assembly required. See installation guides for details. NOTES: Slim: • CHS-R-1208 • CHS-R-1715 Wide: • CHW-R-2010 • CHW-S-2027 • CHW-S-7532 • CHW-S-2623 • CHW-S-3030 •CHW-S-3561 Slim: • CHS-R-1208 • CHS-R-1715 • CHS-C-1616 • CHC-S-1921 Specialty: • CHSP-R-2970 • CHSP-S-1618 • CHSP-STEP-8142 No Wire Lead FLEX Uncut, Standard Product Labels Tape Cut to Length Channel Uncut FLEX cut to length with FLEX Connect® Power Feeds for Field Termination, Channel uncut for field cutting FLEX Connect® Connectors Wire Leads DF6DF 05/23/2019 05/23/2019