Loading...
HomeMy WebLinkAboutFile Documents.535 E Hyman Ave.0069.2018 (4).ACBKFlos.architectural@flos.com www.flos.com UT PRO 150 Track GA69 designed by FLOS Architectural Projector for mounting on three- phase rail with LED light source. 120/277V, 47-63Hz power supply included . 09.7.40White 09.7.14Black UT PRO 150 TRACK GA69 ON BOARD DIMMER INCLUDED Mounting Lamps description Environment OPTICAL Aiming Light distribution symmetry Beam angle ELECTRICAL Transformer availability Transformer mounting Emergency Insulation class Ø57 157193Transformer type : Track mounting : LED ARRAY 23,5W 3000K ##-CRI0 550mA Indoor :Adjustable : Symmetric : 4QPU : Included : Integral : Electronic : Without : Class II F1 Flos.architectural@flos.com www.flos.com UT PRO 150 Track GA69 designed by FLOS Architectural Projector for mounting on three- phase rail with LED light source. 120/277V, 47-63Hz power supply included . 09.7.40White 09.7.14Black UT PRO 150 TRACK GA69 ON BOARD DIMMER INCLUDED Mounting Lamps description Environment OPTICAL Aiming Light distribution symmetry Beam angle ELECTRICAL Transformer availability Transformer mounting Emergency Insulation class Ø57 157193Transformer type : Track mounting : LED ARRAY 23,5W 3000K ##-CRI0 550mA Indoor :Adjustable : Symmetric : .FEJVN : Included : Integral : Electronic : Without : Class II F2 ORDERING INFORMATION Electrical feeds are chosen based on application (end or in-line). Supplementary current limiters are chosen separately based on total wattage to be applied to the trac circuit. Feeds and current limiters are supplied separately and easily assembled by the installer. PRODUCT SPECIFICATIONS Features Designed to be installed at every trac feed location, in place of a standard non-limiting feed • In-line feeds can be used to feed trac as one electrical circuit in both directions or as two separate circuits using two current limiters • Feed connector and current limiting circuit breaker are specified and ordered separately for maximum configuration flexi- bility • Not intended to be used as a primary circuit protector. Mini End Feed Construction Surface mounting only – not intended to be installed over a j-box • T-bar compatible only when installed off-grid and fed directly • One 7/8” knockout for direct electrical feed connections • Includes ground terminal attachment screw • Injection molded polycar- bonate cover attaches to mounting plate using tamper-resistant screws (screwdriver bit supplied with each mini end feed) • Mini end feed connector is permanently attached to trac using one-way screw. End Feed Construction Heavy-duty 14 gauge (0.075 thick) die formed galvanized steel mounting plate • Surface or j-box mounting • T-bar compatible when fed directly • Mounting holes provided for j-box attachment • Center knockout enables feeding from j-box for simple wiring termination • Two 7/8” knockouts for direct electrical feed con- nections • Includes ground terminal attachment screw • Injection molded polycarbonate cover with tearout for 2-breaker installations • Cover attaches to mounting plate using tamper-resistant screws (screwdriver bit supplied with each mini end feed) • Feed connector is permanently attached to trac using one-way screw. Finish Available in white, black, bronze or silver finishes • Supplementary current limiting circuit breakers are ordered separately and can be specified in complementary finishes to match feed connector. Supplementary Current Limiting Circuit Breakers Miniature single pole supplementary current limiters limit the current (wattage) that can be consumed on the trac section being fed • Utilizes hydraulic magnetic technology which provides accurate and reliable circuit protection even when exposed to extremely hot and/or cold application environments • Rated for 120VAC, 60Hz operation • Available in individual amperage ratings of 0.5A, 1A, 2A, 3A, 4A, 5A, 6A, 7A, 8A, 9A, 10A, 12A and 14A, selected based on actual lighting loads • Can be operated continuously at rated current • Specially designed to prevent nuisance tripping • Easily snaps into mounting plate without the use of tools • Leads wires provided for simplified installation • ON/OFF indication clearly identifies breaker status • Easily resettable in the event of an overcurrent situation • UL 1077, CSA 22.2 approved. Labels UL and cUL Listed • Approved by the California Energy Commission to meet the requirements of Title 24 • Complies with ASHRAE 90.1 and IECC Section 805.5.1.4 for trac current limiting. Product specifications subject to change without notice. D2.15.1 Project: Fixture Type: Location: Contact/Phone: TRAC-LITES Current Limiting Feeds For R Series Trac Systems PRODUCT DESCRIPTION Juno Trac-Lites Current Limiting Feeds provide a simple solution for complying with stringent energy codes like ASHRAE 90.1 and California Title 24. Installed at every trac lighting feed location, these feeds employ supplementary current limiting circuit breakers which are designed to limit available wattage to lighting circuits to only that necessary to meet the lighting design criteria. Rather than lighting loads being calculated by the greater of maximum fixture wattage ratings or an arbitrary watts-per-foot multiplier, the Trac-Lites Current Limiting Feeds enable calculations to instead be made based on the rating of the supplementary breaker(s) installed in the feeds. Because they limit a circuit, not the light- ing equipment itself, the Trac-Lites Current Limiting Feeds provide maximum flexibility to accommodate frequent lighting design modifications and layout changes, especially typical for retail spaces. REV-10/13 Current Limiting Electrical Feeds Catalog Number Description Trac Type Finish RCLFM11BL Mini End Feed 1-Circuit Black RCLFM11WH Mini End Feed 1-Circuit White RCLFM11SL Mini End Feed 1-Circuit Silver RCLFM11BZ Mini End Feed 1-Circuit Bronze RCLF11BL End Feed 1-Circuit Black RCLF11WH End Feed 1-Circuit White RCLF11SL End Feed 1-Circuit Silver RCLF11BZ End Feed 1-Circuit Bronze RCLF21BL In-Line Feed 1-Circuit Black RCLF21WH In-Line Feed 1-Circuit White RCLF21SL In-Line Feed 1-Circuit Silver RCLF21BZ In-Line Feed 1-Circuit Bronze Current Limiting Circuit Breakers (order separately) Catalog Number Description Wattage Finish TCL0.5BL 0.5A Current Limiter 60W Black TCL0.5WH 0.5A Current Limiter 60W White TCL1BL 1A Current Limiter 120W Black TCL1WH 1A Current Limiter 120W White TCL2BL 2A Current Limiter 240W Black TCL2WH 2A Current Limiter 240W White TCL3BL 3A Current Limiter 360W Black TCL3WH 3A Current Limiter 360W White TCL4BL 4A Current Limiter 480W Black TCL4WH 4A Current Limiter 480W White TCL5BL 5A Current Limiter 600W Black TCL5WH 5A Current Limiter 600W White TCL6BL 6A Current Limiter 720W Black TCL6WH 6A Current Limiter 720W White TCL7BL 7A Current Limiter 840W Black TCL7WH 7A Current Limiter 840W White TCL8BL 8A Current Limiter 960W Black TCL8WH 8A Current Limiter 960W White TCL9BL 9A Current Limiter 1080W Black TCL9WH 9A Current Limiter 1080W White TCL10BL 10A Current Limiter 1200W Black TCL10WH 10A Current Limiter 1200W White TCL12BL 12A Current Limiter 1440W Black TCL12WH 12A Current Limiter 1440W White TCL14BL 14A Current Limiter 1680W Black TCL14WH 14A Current Limiter 1680W White APPLICATION Energy codes typically calculate trac lighting loads based on linear feet of installed trac. Some codes use an arbitary multiplier as low as 30 watts/foot while others use a multiplier as high as 70 watts/foot. When using the energy efficient lighting technologies available today, the connected load is typically much less than the per-foot multipliers used by most energy codes. This penalizes lighting designs that employ trac lighting and wastes available lighting watts that could be used more effectively. Below is a typical trac lighting example. The Standard Layout consists of 100’ of single circuit trac (4 circuits x 25’ each) with 32 LED trac heads, each consuming 24W, for a total connected load of 768W. The scenario with the Trac-Lites Current Limiting Feeds uses the original 100’ of single circuit trac, with each 25’ trac section monitored by a 2-Amp supplementary current limiter that is closely matched to the actual connected load of 768W plus a small buffer. This significantly reduces the calculated watts per the energy codes. 1. Standard Layout without Trac-Lites Current Limiting Feeds Trac-Lites Current Limiting Feeds install between the branch circuit breaker and the trac lighting, solving the energy code calculation discrepancy, making the wattage calculation independent of trac length. 2A, 240W 2A, 240W 2A, 240W 2A, 240W Same 100 ft. of trac: 2A @ 120V = 240W (x4 circuits) 960W total 3. Standard Layout with Trac-Lites Current Limiting Feeds 5 7/8" 4 5/8" 5 3/16" 1 1/4" END FEED 5 1/2" 1 7/8" 1 1/16" MINI END FEED 7 1/8" 4 5/8" 5 3/16" 1 1/4" IN-LINE FEED D2.15.1 1300 S. Wolf Road • Des Plaines, IL 60018 • Phone (847) 827-9880 • Fax (847) 827-2925 220 Chrysler Drive • Brampton, Ontario • Canada L6S 6B6 • Phone (905) 792-7335 • Fax (905) 792-0064 Visit us at www.junolightinggroup.com Printed in U.S.A. ©2013 Juno Lighting, LLC. TRAC-LITES Current Limiting Feeds )ORVDUFKLWHFWXUDO#IORVFRP ZZZIORVFRP -RKQQ\5RXQG/ 5HFHVVHG8QLYHUVDO)UDPH GHVLJQHGE\)/26$UFKLWHFWXUDO 5HFHVVHGOXPLQDLUHZLWK/('OLJKWVRXUFH3RZHUVXSSO\LQFOXGHG2QHGULYHUHDFKOLJKWVRXUFH 8//LJKW6RXUFH%ODFN %R[%ODFN 8//LJKW6RXUFH:KLWH %R[ :KLWH &(57,),&$7,216 -2+11<5281'/ă5(&(66('81,9(56$/)5$0( 1XPEHURIKHDGV 0RXQWLQJ /DPSVGHVFULSWLRQ /XPLQDLUHOXPLQRXVIOX[ (QYLURQPHQW 1RWHV  &HLOLQJUHFHVVHG /('$UUD\'&:OP.%%/&5, ([WUHPH&XWRII6HHUHIHUHQFHQXPEHU ,QGRRU 8QLTXHUHIHUHQFHIRU7ULPRU1R7ULPUHFHVVHGLQVWDOODWLRQ ,QFOXGHVRSWLRQDOZKLWHDQGEODFNIUDPHVWRFRPSOHWH7ULPILQLVKLQJ 237,&$/237,&$/ $LPLQJ $GMXVWDEOH /LJKWGLVWULEXWLRQV\PPHWU\6\PPHWULF %HDPDQJOH r6SRW (/(&75,&$/(/(&75,&$/ 7UDQVIRUPHUDYDLODELOLW\ 7UDQVIRUPHUPRXQWLQJ 7UDQVIRUPHUW\SH (PHUJHQF\ ,QVXODWLRQFODVV ,QFOXGHG 5HPRWH (OHFWURQLFGLPPDEOH9 &ODVV,,, 3+<6,&$/3+<6,&$/ &RQVWUXFWLRQPDWHULDO $OXPLQLXP F3 )ORVDUFKLWHFWXUDO#IORVFRP ZZZIORVFRP -RKQQ\5RXQG/ 5HFHVVHG8QLYHUVDO)UDPH GHVLJQHGE\)/26$UFKLWHFWXUDO 5HFHVVHGOXPLQDLUHZLWK/('OLJKWVRXUFH3RZHUVXSSO\LQFOXGHG 2QHGULYHUHDFKOLJKWVRXUFH &(57,),&$7,216 -RKQQ\5RXQG/ă5HFHVVHG8QLYHUVDO)UDPH$FFHVVRULHV 2SWLFDO  6FUHHQLQJ&URVVSLHFH  (OOLSWLFDO/HQV  )ORRG/HQV  +RQH\FRPE  6QRRW6KLHOGLQJ&RQH 8//LJKW6RXUFH%ODFN %R[%ODFN 8//LJKW6RXUFH:KLWH %R[ :KLWH FluxStream_LED_Strip 07/17 page 1 of 6 Project: Location: Cat.No: Type: Lumens: Qty: Notes: Linear FluxStream strip 2', 3', 4' and 8' Philips Day-Brite / Philips CFI FluxStream LED strip is a high performing luminaire delivering smooth diffuse light ideal for light industrial, commercial and residential applications with the unparalleled energy efficiency of Philips LED lighting. Accessories (order separately) • FSSD2L - 2' Diffuse replacement lens • FSSD3L - 3' Diffuse replacement lens • FSSD4L - 4' Diffuse replacement lens (order two for 8' models) • FSSWG4 - 4' wire guard (order two for 8' models) • FSTH - Sliding hanger bracket (set of two) • LSXR10 - Low bay PIR motion sensor, 120-277V • LSXR10ADC - Low bay PIR motion sensor with photocell and hi/lo trim dimming, 120-277V • (See last page for details and more options) General notes Many luminaire components, such as reflectors, refractors, lenses, sockets, lampholders, and LEDs are made from various types of plastics which can be adversely affected by airborne contaminants. If sulfur based chemicals, petroleum based products, cleaning solutions, or other contaminants are expected in the intended area of use, consult factory for compatibility. Ordering guide Example: FSS440L840-UNV-DIM Series Length (nominal) Lumens2 (nominal) Color temp. (K) Voltage Driver Options FSS – – – FSS FluxStream strip 2 2' length 20L 2000 lumens 30L 3000 lumens 830 80 CRI, 3000K 835 80 CRI, 3500K 840 80 CRI, 4000K 8503 80 CRI, 5000K UNV Universal voltage 120-277V 1204 120V 2774 277V 3475 347V DIM 0-10V 1% dimming SDIM6,7 Step dimming to 40% input power XDIM4,6,7 MarkX phase dimming DALI8 DALI EMLED5,6,9 Factory wired Philips Bodine BSL310LP integral emergency pack. Nominal 1100lm LSXR10 120-347V motion sensor, factory installed on end cap LSXR10ADC10 120-347V motion sensor with photocell and hi/lo trim dimming, factory installed on end cap DAYOCC11,12 Integral sensor, daylighting and occupancy, Philips EasySense SNS102 PAF Paint after fabrication (white) BK Matte black paint color ST Satin aluminum paint color 3 3' length 30L 3000 lumens 4 4' length 30L 3000 lumens 40L 4000 lumens 55L 5500 lumens 70L 7000 lumens 81 8' length 60L 6000 lumens 80L 8000 lumens 110L 11000 lumens 140L 14000 lumens 1. 8' is tandem (2) 4' lenses with single piece 8' body. 2. Nominal delivered lumens at 25°C ambient. 3. Not available in 3' model. 4. XDIM option must be specified with 120V or 277V option only. 5. 347V with EMLED only available in 8' models. 6. Not available in 2' or 3' model. 7. Not available in 4' 70L model or 8' 140L model. 8. DALI available up to 80L models only, consult factory for other options. 9. EMLED on 8' models illuminates 4' section in emergency mode. 10. Available with DIM driver option only. 11. Specify DIM driver with DAYOCC option. 12. Not available in 8' 110L or 140L models. F4 & F4-EM FluxStream_LED_Strip 07/17 page 2 of 6 FSS FluxStream LED strip 2', 3', 4' and 8' Features • Compact design for installation in tight spaces • Frosted acrylic diffuser provides wide light distribution and superior glare control • Diffuser and LED plate snap into place allowing tool-free access to LED boards and driver • 2', 3', 4' and 8' tandem lengths available to accommodate many field applications • Up to 100,000 hour predicted L70 LED lumen maintenance provides long service life to reduce maintenance costs • Can be surface mounted on ceilings or walls, or suspended via chain, pendants or cables • Wall mountable - ADA compliant • Ideal for cold applications (-20°C) • Continuous row mounting using standard end caps. No extra parts needed • 7/8" knock out provided at each end and on base of luminaire. Note: Center knockout is covered and not useable in 4' version with EMLED option. •Multiple driver options available with 0-10v as standard • Enclosed lens minimizes penetration of dust, insects, and other debris into the LED compartment. • 8' tandem unit is two 4' optical assemblies with a center mullion on a single full length chassis. • Integral controls options include sensor mounted in control module extension mounted on fixture end (see dimension drawing). Controls are commissioned via intuitive Philips app on a Droid smartphone either through NFC or an IR blaster. • Fluxstream luminaires are Designlights Consortium® qualifed. Please see the DLC QPL list for exact catalog numbers (http://www.designlights.org/QPL). • 5 year manufacturer's limited warranty Visit www.philips.com/warranties for complete warranty information. Finish • Baked white acrylic matte high reflectance paint finish Shielding • Contoured frosted acrylic lens Electrical • LED boards and drivers are RoHS (Restriction of Hazardous Substances) compliant. Total system life rated at 50,000 hours. Predicted L70 lifetime based on LED manufacturer’s supplied LM-80 data and in-situ laboratory testing. Materials • Heavy gauge cold rolled steel housing, LED plate, and end caps DAYOCC • Integrated fixture mount Philips EasySense sensor featuring daylight and PIR occupancy sensing • Compatibility with Philips Advance Xitanium SR Sensor Ready LED drivers • Features automatic or manual on/off scenarios for code compliance and to realize full energy savings potential • Basic grouping to a wireless switch via an IR interface with the Philips Field App • Self-powered single rocker switch Illumra #ZBT-S1AWH (sourced by others), up to 40 luminaires may be grouped to a single switch • Recommended maximum spacing of 25ft between luminaires, and closest luminaire to wall switch Labels • cETLus listed • Suitable for damp locations FluxStream_LED_Strip 07/17 page 3 of 6 FSS FluxStream LED strip 2', 3', 4' and 8' Fixture Lumens Wattage Efficacy FSS220L 2000lm 17W 123lm/w FSS330L 3000lm 26W 119lm/w FSS440L 4000lm 31W 133lm/w FSS455L 5500lm 45W 129lm/w FSS470L 7000lm 58W 126lm/w Performance data Dimensions 7/8" Dia. K.O. 1-1/2" (38mm) 3" (76mm) 2-1/2" (64mm) 8 FT 4 FT 3 FT 2 FT 44-3/4" (1137mm) 33-1/2" (851mm) 22-1/2" (572mm) 44-3/4" (1137mm) 7/8" Dia. K.O.7/8" Dia. K.O. 9/16" Dia. K.O. 1/4" Dia. Hole 3/4" (19mm) 1-3/8" (35mm) 2-3/8" (60mm) 7/8" Dia. K.O. 9/16" Dia. K.O. 1/4" Dia. Hole1/4" Dia. Hole 9/16" Dia. K.O.7/8" Dia. K.O. 22-3/8" (568mm) 3/4" (19mm) 1-3/8" (35mm) 2-3/8" (60mm) 1/4" Dia. Hole 9/16" Dia. K.O. 1/4" Dia. Hole 9/16" Dia. K.O. 89-1/2" (2273mm) 7/8" Dia. K.O. 9/16" Dia. K.O. 1/4" Dia. Hole 15-3/4" (400mm) 3/4" (19mm) 1-3/8" (35mm) 2-3/8" (60mm) 7/8" Dia. K.O. 9/16" Dia. K.O. 1/4" Dia. Hole 3/4" (19mm) 1-3/8" (35mm) 2-3/8" (60mm) –DAYOCC control module extension 3" (76mm) Configuration Ambient FSS470L -20°C to 30°C FSS8110L -20°C to 35°C FSS8140L -20°C to 25°C EMLED option Minimum 0°C All others -20°C to 40°C Ambient temperature data FluxStream_LED_Strip 07/17 page 4 of 6 FSS FluxStream LED strip 2', 3', 4' and 8' Photometry Candlepower Angle End 45 Cross Back-45 0 644 644 644 644 5 635 641 646 641 15 610 618 626 618 25 520 567 585 567 35 451 474 495 474 45 371 403 432 403 55 284 324 362 324 65 191 243 288 243 75 96 167 218 167 85 18 105 155 105 Catalog No. FSS220L840-UNV-DIM Test No. 37164 S/MH 1.2 Lamp Type LED Lumens 2034 Input Watts 17 Comparative yearly lighting energy cost per 1000 lumens – $1.95 based on 3000 hrs. and $.08 pwr KWH. The photometric results were obtained in the Philips Day-Brite laboratory which is NVLAP accredited by the National Institute of Standards and Technology. Photometric values based on test performed in compliance with LM-79. Coefficients of Utilization EFFECTIVE FLOOR CAVITY REFLECTANCE 20 PER (pfc=0.20) pfc = 20 Ceil 80 70 50 Wall 70 50 30 70 50 30 50 30 RCR 0 118 118 118 114 114 114 108 108 1 106 100 94 102 96 93 92 88 29586799283778073 3 8676678373666963 4 7967577765566155 5 7259506957505547 6 6754456552445041 76148405947394538 8 5744355642344134 9 5440325340323830 10 51 38 30 49 37 29 35 29 2' FluxStream LED strip, 2000 nominal delivered lumens LER - 123 Average Luminance Zone End 45° Cross 45 15155 12916 12955 55 14048 11583 11859 65 12449 10173 10781 75 9646 8758 9839 85 4206 7611 9181 Light Distribution Degrees Lumens % Luminaire 0-30 493 24.2 0-40 790 38.9 0-60 1391 68.4 0-90 1910 93.9 90-180 124 6.1 0-180 2034 100 Candlepower Angle End 45 Cross Back-45 0 982 982 982 982 5 966 978 980 978 15 927 943 948 943 25 849 869 884 869 35 738 772 795 772 45 609 655 690 655 55 435 505 554 505 65 293 356 414 356 75 148 232 301 232 85 28 129 201 129 Catalog No. FSS330L840-UNV-DIM Test No. 37132 S/MH 1.3 Lamp Type LED Lumens 3045 Input Watts 26 Comparative yearly lighting energy cost per 1000 lumens – $2.02 based on 3000 hrs. and $.08 pwr KWH. The photometric results were obtained in the Philips Day-Brite laboratory which is NVLAP accredited by the National Institute of Standards and Technology. Photometric values based on test performed in compliance with LM-79. 3' FluxStream LED strip, 3000 nominal delivered lumens LER - 119 Average Luminance Zone End 45° Cross 45 16859 14162 13823 55 14686 12197 12138 65 13174 10098 10376 75 10412 8269 9110 85 4882 6455 7980 Light Distribution Degrees Lumens % Luminaire 0-30 759 24.9 0-40 1241 40.8 0-60 2187 71.8 0-90 2918 95.8 90-180 127 4.2 0-180 3045 100 Coefficients of Utilization EFFECTIVE FLOOR CAVITY REFLECTANCE 20 PER (pfc=0.20) pfc = 20 Ceil 80 70 50 Wall 70 50 30 70 50 30 50 30 RCR 0 118 118 118 115 115 115 109 109 1 107 101 96 103 98 93 93 90 2 96 88 81 93 85 79 81 76 3 88 77 68 84 75 67 70 65 4 80 68 58 78 66 57 63 56 5 73 60 51 70 58 51 56 48 6 68 55 45 66 53 45 51 44 7 63 48 40 60 47 40 46 39 8 58 45 36 56 44 35 42 34 9 55 40 33 53 40 33 39 32 10 51 38 30 50 38 30 36 29 FluxStream_LED_Strip 07/17 page 5 of 6 FSS FluxStream LED strip 2', 3', 4' and 8' Photometry Candlepower Angle End 45 Cross Back-45 0 1272 1272 1272 1272 5 1250 1265 1277 1265 15 1199 1221 1237 1221 25 1098 1130 1157 1130 35 957 1005 1044 1005 45 791 860 910 860 55 606 690 758 690 65 382 481 598 481 75 194 326 416 326 85 36 196 289 196 Catalog No. FSS440L840-UNV-DIM Test No. 37259 S/MH 1.3 Lamp Type LED Lumens 4130 Input Watts 31 Comparative yearly lighting energy cost per 1000 lumens – $1.80 based on 3000 hrs. and $.08 pwr KWH. The photometric results were obtained in the Philips Day-Brite laboratory which is NVLAP accredited by the National Institute of Standards and Technology. Photometric values based on test performed in compliance with LM-79. Coefficients of Utilization EFFECTIVE FLOOR CAVITY REFLECTANCE 20 PER (pfc=0.20) pfc = 20 Ceil 80 70 50 Wall 70 50 30 70 50 30 50 30 RCR 0 118 118 118 114 114 114 108 108 1 106 101 95 103 97 93 92 89 2 9586809384788075 3 8676678373666964 4 8067577765566155 5 7259517057505647 6 6854456553445042 7 6348405947394638 8 5744355644344134 9 5440325340323830 10 51 38 30 49 37 29 35 28 4' FluxStream LED strip, 4000 nominal delivered lumens LER - 133 Average Luminance Zone End 45° Cross 45 16754 14171 13847 55 15678 12712 12618 65 13207 10415 11375 75 10615 8873 9550 85 5052 7511 8720 Light Distribution Degrees Lumens % Luminaire 0-30 986 23.9 0-40 1614 39.1 0-60 2886 69.9 0-90 3905 94.6 90-180 225 5.4 0-180 4130 100 Candlepower Angle End 45 Cross Back-45 0 1788 1788 1788 1788 5 1757 1777 1792 1777 15 1685 1715 1736 1715 25 1544 1585 1623 1585 35 1346 1408 1462 1408 45 1113 1202 1271 1202 55 852 960 1055 960 65 575 712 828 712 75 272 443 610 443 85 50 259 389 259 Catalog No. FSS455L840-UNV-DIM Test No. 37262 S/MH 1.3 Lamp Type LED Lumens 5759 Input Watts 45 Comparative yearly lighting energy cost per 1000 lumens – $1.86 based on 3000 hrs. and $.08 pwr KWH. The photometric results were obtained in the Philips Day-Brite laboratory which is NVLAP accredited by the National Institute of Standards and Technology. Photometric values based on test performed in compliance with LM-79. Coefficients of Utilization EFFECTIVE FLOOR CAVITY REFLECTANCE 20 PER (pfc=0.20) pfc = 20 Ceil 80 70 50 Wall 70 50 30 70 50 30 50 30 RCR 0 118 118 118 115 115 115 108 108 1 106 101 95 103 97 93 93 89 2 9586809384788075 3 8676688373666964 48067577766566155 5 7259517058505647 6 6854456553445042 7 6348406047394638 8 5744355644344134 9 5440325340323830 10 51 38 30 49 37 29 36 29 4' FluxStream LED strip, 5500 nominal delivered lumens LER - 129 Average Luminance Zone End 45° Cross 45 23558 19796 19347 55 22047 17697 17574 65 19887 15425 15749 75 14898 12084 14023 85 7023 9926 11749 Light Distribution Degrees Lumens % Luminaire 0-30 1384 24 0-40 2264 39.3 0-60 4043 70.2 0-90 5478 95.1 90-180 281 4.9 0-180 5759 100 FluxStream_LED_Strip 07/17 page 6 of 6 FSS FluxStream LED strip 2', 3', 4' and 8' Photometry Candlepower Angle End 45 Cross Back-45 0 2211 2211 2211 2211 5 2176 2199 2217 2199 15 2088 2124 2148 2124 25 1914 1966 2010 1966 35 1672 1750 1813 1750 45 1379 1502 1580 1502 55 1058 1204 1317 1204 65 714 898 1041 898 75 339 592 776 592 85 63 344 524 344 Catalog No. FSS470L840-UNV-DIM Test No. 37265 S/MH 1.3 Lamp Type LED Lumens 7275 Input Watts 58 Comparative yearly lighting energy cost per 1000 lumens – $1.90 based on 3000 hrs. and $.08 pwr KWH. The photometric results were obtained in the Philips Day-Brite laboratory which is NVLAP accredited by the National Institute of Standards and Technology. Photometric values based on test performed in compliance with LM-79. 4' FluxStream LED strip, 7000 nominal delivered lumens LER - 126 Average Luminance Zone End 45° Cross 45 29203 24745 24050 55 27371 22192 21938 65 24688 19451 19793 75 18540 16135 17825 85 8824 13174 15831 Light Distribution Degrees Lumens % Luminaire 0-30 1714 23.6 0-40 2809 38.6 0-60 5028 69.1 0-90 6879 94.6 90-180 396 5.4 0-180 7275 100 Coefficients of Utilization EFFECTIVE FLOOR CAVITY REFLECTANCE 20 PER (pfc=0.20) pfc = 20 Ceil 80 70 50 Wall 70 50 30 70 50 30 50 30 RCR 0 118 118 118 114 114 114 108 108 1 106 100 95 103 97 93 92 89 2 95 86 79 92 83 78 80 73 3 86 76 67 83 73 66 69 63 4 79 67 57 77 65 56 61 55 5 72 59 50 69 57 48 55 47 6 67 54 44 65 52 44 50 41 7 61 47 40 59 46 39 45 38 8 57 44 35 56 42 34 40 34 9 54 40 32 52 40 32 38 30 10 51 37 29 49 37 29 35 28 © 2017 Philips Lighting Holding B.V. All rights reserved. Philips reserves the right to make changes in specifications and/or to discontinue any product at any time without notice or obligation and will not be liable for any consequences resulting from the use of this publication. philips.com/luminaires Philips Lighting North America Corporation 200 Franklin Square Drive, Somerset, NJ 08873 Tel. 855-486-2216 Philips Lighting Canada Ltd. 281 Hillmount Rd, Markham, ON, Canada L6C 2S3 Tel. 800-668-9008 Accessories Accessory Catalog Code Description FSTH Sliding hanger bracket (pair) SV5F12 12" Stem and canopy kit White stem and canopy kit, 1/4" trade size (1/2" O.D.) locknuts included. Works with 9/16" k.O. on base of housing. SV5F18 18" Stem and canopy kit SV5F24 24" Stem and canopy kit SV5F36 36" Stem and canopy kit SV5F48 48" Stem and canopy kit FKR-126 Chain hanger set (pair)Includes two 5' heavy duty link chains with "V" hooks. Attaches to base of housing. DACHxx Adjustable cable hanger kit (single) Works with 1/4" hole on base of housing or FSTH hanger bracket. xx=cable length in inches, enter 48" to 180" lengths in 12" increments DACHxx-1-SC Adjustable cable hanger kit with white straight 18/3 cord (single) DACHxx-1-CC Adjustable cable hanger kit with white coiled 18/3 cord (single) DACHxx-2-SC Adjustable cable hanger kit with white straight 18/4 cord (single) DACHxx-2-CC Adjustable cable hanger kit with white coiled 18/4 cord (single) DACHxx-1D-SC Adjustable cable hanger kit with white straight 18/5 cord with dimming leads (single) LSXR10 Low bay pir motion sensor (120-277v) LSXR10ADC Low bay pir motion sensor with photocell and hi/lo trim dimming (120-277v) FSSWG4 4' Wire guard (order two for 8' models) FSSD2L 2' Diffuse replacement lens FSSD3L 3' Diffuse replacement lens FSSD4L 4' Diffuse replacement lens (order two for 8' models) SensorChainCableBracketStem Wire guardLSXR