HomeMy WebLinkAboutFile Documents.315 Dean St.0007.2018 (15).ACBKFixture Type:
Catalog Number:
Project:
Location:
WAC Lighting
www.waclighting.com
Phone (800) 526.2588 • Fax (800) 526.2585
Headquarters/Eastern Distribution Center
44 Harbor Park Drive • Port Washington, NY 11050
Phone (516) 515.5000 • Fax (516) 515.5050
Western Distribution Center
1750 Archibald Avenue • Ontario, CA 91760
Phone (800) 526.2588 • Fax (800) 526.2585
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. Sep 2017
HR-LED231R
1" LEDme® Miniature Recessed Spot
2w"
3"
14"
FINISHES
BN GM WT
PRODUCT DESCRIPTION
Round recessed trim with interior open reflector for use with a
remote driver. Perfect for use under cabinets or in wall niches.
FEATURES
• 1" aperture
• Cutout: 22”
• Less than z” thick, super low profile trim
• Narrow flood beam spread
• 25° visual cut-off angle
• 350° horizontal rotation
• 80,000 hour rated life
• 5 year WAC Lighting product warranty
SPECIFICATIONS
Construction: Die-cast aluminum trim, aluminum heat sink
and 20 gauge steel housing painted black.
Wiring: Socket and insulated wires are pre-installed within housing, wires
lead out through the side of the housing for connection to remote driver.
Driver: Remote LEDme® electronic low voltage driver required (see below).
Dimming and non-dimming drivers available. Use a multiple terminal block to
wire up to 3 fixtures for dimmable drivers
Light Source: Includes one 3W ANSI compliant Warm/Neutral LED
for the finest color consistency possible. Replacement modules available.
Dimming: May be dimmed to 10% with electronic low voltage (ELV) dimmer.
Mounting: Two heavy gauge inner retention clips push out onto mounting
surface to firmly hold fixture in place. Accommodates surface up to w" thick.
22" cutout hole. Approved for use in ceilings with a Class 2 driver.
Finish: Available in White (WT) powder coat paint and electroplated
Brushed Nickel (BN) and Gun Metal (GM).
Rating: Non-IC: insulation must be kept at least 3" away from the housing.
Standards: UL & cUL Damp Location Listed
LEDme® REMOTE DRIVERS
Model #Description Type Dimming # Fixture Dimensions
LD-700MA03-EDIM-IS Electronic low voltage Hardwire Yes 1 L: 5s"W: 1s"H: 18"
LD-700MA09-EDIM-IS Electronic low voltage Hardwire Yes 3 L: 78"W: 38"H: 1s"
See individual driver spec sheets for complete information.
ORDER NUMBER
Model #Color Temp Finish
HR-LED231R 27
30
35
40
2700K
3000K
3500K
4000K
BN
GM
WT
Brushed Nickel
Gun Metal
White
HR-LED231R ––
Example: HR-LED231R-40-WT
FIXTURE PERFORMANCE
Model #Color Temp Watt Lumens CBCP Beam CRI
HR-LED231R-27 2700K 4W*255 539 35°85
HR-LED231R-30 3000K 4W*260 550 35°85
HR-LED231R-35 3500K 4W*275 584 35°85
HR-LED231R-40 4000K 4W*295 619 35°85
*power consumption may vary depending on efficiency of the system being used.
REPLACEMENT MODULES
Model #Color Temp
RM1X3-27-1-DL
RM1X3-30-1-DL
RM1X3-35-1-DL
RM1X3-40-1-DL
2700K
3000K
3500K
4000K
02/07/2018
LED2 WAC lightingDownlight 9w trans