Loading...
The URL can be used to link to this page
Your browser does not support the video tag.
Home
My WebLink
About
File Documents.401 E Cooper Ave.0063.2018 (7).ACBK
1300 S. Wolf Road • Des Plaines, IL 60018 • Phone (847) 827-9880 • Fax (847) 827-2925 • Visit us at www.acuitybrands.com/juno-trac Printed in U.S.A. ©2017-2018 Acuity Brands Lighting, Inc. Rev. 1/31/18 1 of 6 Project: Fixture Type: Location: Contact/Phone: DIMENSIONSPRODUCT DESCRIPTION Reduced-profile, single-circuit trac sections for surface or pendant mounting. Compatible with a full range of feed, connector and mounting accessories, as listed on back of this page. Accepts all Trac-Lites and Trac- Master trac fixtures. PRODUCT SPECIFICATIONS Construction Extruded aluminum with thermoplastic insulator • Injection molded polycarbonate dead-end with set screw • Standard lengths may be cut-to-length by installer. Electrical Two 12 gauge solid copper conductors • Rated 20 amps at 120 volts • Aluminum channel used as system ground • One-piece insulator insures consistent conductor spacing for reliable electrical contact • Insulating bushings supplied at mounting hole locations to prevent shorts to ground. Labels UL/CUL listed. PRODUCT INSTALLATION Debossed polarity line provides visual cue to proper trac, trac connector and fixture alignment • Supplied with toggle bolts for surface mounting • Insulator stays same length as extrusion to simplify field-cutting of trac • Connectors and feeds simply push into trac sections. Specifications subject to change without notice. D2.1.0 TRAC-LITES One Circuit Trac System TRAC SECTIONS & SYSTEM COMPONENTS R Series ***STARBUCKS KIT INCLUDES: (3) R4FT, (2) R23 (1) R38. ORDERING INFORMATION Example: R 8FT WH Series Length Finish R Trac-Lites 1-Circuit Track Sections 2FT 2-foot track section; actual length 19-7/8” 4FT 4-foot track section; actual length 43-7/8” 6FT 6-foot track section; actual length 67-7/8” 8FT 8-foot track section; actual length 91-7/8” BL Black BZ Bronze NAT Natural SL Silver WH White 12949 5/21/2018 1300 S. Wolf Road • Des Plaines, IL 60018 • Phone (847) 827-9880 • Fax (847) 827-2925 • Visit us at www.acuitybrands.com/juno-trac Printed in U.S.A. ©2017 2018 Acuity Brands Lighting, Inc. Rev. 1/31/18 2 of 6 D2.1.0 TRAC-LITES One Circuit Trac System TRAC SECTIONS & SYSTEM COMPONENTS R Series Electrical Feeds Examples: R21 BL, R34 RP WH R21 R21 RP R29 R34 R34 RP BL, BZ, SL, WH BL, BZ, SL, WH BL, BZ, SL, WH BL, BZ, SL, WH BL, BZ, SL, WH End Feed Connector and Outlet Box Cover End Feed Connector and Outlet Box Cover Floating Electrical Feed Conduit Feed Conduit Feed For outlet box feed. Includes: outlet box cover, fixture strap and ground screw. Same as R21 except designed for use in opposite polarity orientation compared to standard feed connectors. Permits mounting any point of trac under outlet box. Includes floating connector, outlet box cover plus extra trac dead end. For surface wiring. Use standard 1/2” connector. Same as R34 except designed for use in opposite polarity orientation compared to standard feed connectors. R36 R36 RP R38 R38 RP BL, BZ, SL, WH BL, BZ, SL, WH BL, BZ, SL, WH BL, BZ, SL, WH T-Bar End Feed T-Bar End Feed Live End Feed Connector Live End Feed Connector Wiring compartment contains standard 1/2” KO’s. Feeds surface trac from above, when T-bar is directly above trac. Same as R36 except designed for use in opposite polarity orientation compared to standard feed connectors. Feed trac from above with flexible conduit, BX, etc., or end feed in pendant systems. Accepts standard 1/2” connector. Same as R38 except designed for use in opposite polarity orientation compared to standard feed connectors. R22 R122 BL, BZ, SL, WH BL, BZ, SL, WH Cord and Plug Connector Cord and Plug Connector Comes with 15’ two-wire white cord. Includes surface wire retainers and in-line switch. Max cap. 7 amps. Not UL Listed. Same as R122 but with matching color 3-wire grounded cord and plug. No switch. Not UL Listed. 12949 5/21/2018 1300 S. Wolf Road • Des Plaines, IL 60018 • Phone (847) 827-9880 • Fax (847) 827-2925 • Visit us at www.acuitybrands.com/juno-trac Printed in U.S.A. ©2017 2018 Acuity Brands Lighting, Inc. Rev. 1/31/18 3 of 6 D2.1.0 TRAC-LITES One Circuit Trac System TRAC SECTIONS & SYSTEM COMPONENTS R Series Trac Joiners & Dead End Examples: R20 BL, R25 RP WH R20 R23 R24 ‡R25 ‡R25 RP ‡ BL, BZ, SL, WH BL, BZ, SL, WH BL, BZ, SL, WH BL, BZ, SL, WH BL, BZ, SL, WH Accordion Adjustable Joiner Miniature Straight Connector Adjustable Connector “T” Connector “T” Connector Can flex to 90° angle to left, right, up or down. Joins two trac sections. Joins two trac sections end to end. Joins two trac sections to make a 90º angle or straight run. Straight and right angle covers supplied. For outlet box feed, No. T27 cover plate required. Joins three trac sections. For outlet box feed, No. T27 cover plate required. Same as R25 except designed for use in opposite polarity orientation compared to standard feed connectors. T27 R28 R49 BL, BZ, SL, WH BL, BZ, SL, WH BL, BZ, SL, WH Outlet Box Cover Trac Dead End Trac Continuation Kit Use with Nos. R24/R25 for outlet box electrical feed. Includes: nipple, locknut and ground screw. For use with field-cut trac sections. Permits trac to continue a run around obstructions. Includes one left and one right R34 Conduit Feed. Fits standard 1/2” conduit. ‡ R24 and R25 may not be used as feed connectors in Canada due to special grounding requirements. 12949 5/21/2018 1300 S. Wolf Road • Des Plaines, IL 60018 • Phone (847) 827-9880 • Fax (847) 827-2925 • Visit us at www.acuitybrands.com/juno-trac Printed in U.S.A. ©2017 2018 Acuity Brands Lighting, Inc. Rev. 1/31/18 4 of 6 D2.1.0 TRAC-LITES One Circuit Trac System TRAC SECTIONS & SYSTEM COMPONENTS R Series Pendant Stems Examples: T90 12IN BL, T93 BL T90 T91 12IN, 18IN, 24IN, 36IN, 48IN 12IN, 18IN, 24IN, 36IN, 48IN BL, BZ, SL, WH BL, BZ, SL, WH T-Bar Pendant Stem Kit Rigid Ceiling Pendant Stem Kit Compatible with 15/16” flush T-Bar ceilings. Use two for 2’, 4’, 6’ of trac or three for 8’ of trac. Includes canopy, T-Bar mounting plate, stem and trac attachment hardware. For electrical feed, order T93 wireway cover. Attaches directly to junction box in rigid ceilings. Use two for 2’, 4’, 6’ of trac or three for 8’ of trac. Includes canopy, J-Box mounting strap, stem and trac attachment hardware. For electrical feed, order T93 wireway cover. T93 T94 T96 T56 BL, BZ, SL, WH BL, BZ, SL, WH BL, BZ, SL, WH BL, BZ, SL, WH Wireway Cover Sloped Ceiling Adapter Pendant Stem Threaded Coupling Solid Rod Pendant Mounting Kit For Pendant Stem Kits T90 and T91. Conceals electrical feed wires from stem to connector. One cover required for each trac feed. Allows T90 or T91 pendant to hang straight down from sloped ceilings. Can be used to feed electrical wires to Trac at up to 60˚ angle. Enables multiple pendant stems to be joined for higher ceiling applications. Attaches solid 5/16” threaded rod to Trac. Includes: plastic cap, mounting bracket and hardware. Rod not supplied. 10 1/8" 12949 5/21/2018 1300 S. Wolf Road • Des Plaines, IL 60018 • Phone (847) 827-9880 • Fax (847) 827-2925 • Visit us at www.acuitybrands.com/juno-trac Printed in U.S.A. ©2017 2018 Acuity Brands Lighting, Inc. Rev. 1/31/18 5 of 6 Cable Suspension Examples: T595 48IN BL, T598 144IN WH T595 T597 T596 T598 48IN, 144IN 48IN, 144IN 48IN, 144IN 48IN, 144IN BL, WH BL, WH BL, WH BL, WH T-Bar Ceiling Cable Suspension Kit Rigid Ceiling Cable Suspension Kit T-Bar Ceiling Cable Suspension/Feed Kit Rigid Ceiling Cable Suspension/Feed Kit Mechanical-only cable suspension kit for 1-circuit or 2-circuit trac. Compatible with 15/16” flush T-Bar ceilings. Adjustable 48” or 144” stainless steel cable length. Includes mini-canopy, T-bar clip and cable hardware. Trac requires support every 4’. Mechanical-only cable suspension kit for 1-circuit or 2-circuit trac. Attaches directly to junction box in rigid ceilings. Adjustable 48” or 144” stainless steel cable length. Includes mini-canopy, toggle bolt and cable hardware. Trac requires support every 4’. Cable suspension kit with adjustable 48” or 144” electrical feed cable for 1-circuit trac. Compatible with 15/16” flush T-Bar ceilings. Includes canopy, T-bar clip, mounting plate, cable hardware and flexible electrical feed cable. Trac feed connector not included (order separately). Trac requires support every 4’. Cable suspension kit with adjustable 48” or 144” electrical feed cable for 1-circuit trac. Attaches directly to junction box in rigid ceilings. Includes canopy, J-box mounting strap, cable hardware and flexible electrical feed cable. Trac feed connector not included (order separately). Trac requires support every 4’. Note: Cable suspension is recommended for pattern installations only, or those installations that are supplemented with additional rigid mounting points (stems, threaded rod, etc.). Accessories Example: T31 BL R37F R37D R37916 T31 T32 T33 BL, SL, WH BL, SL, WH BL, SL, WH 15/16” T-Bar Attachment Clip 15/16” T-Bar Attachment Clip 9/16” T-Bar Attachment Clip Pendant Adapter Plant or Utility Hook Outlet Adapter To attach to inverted tee ceilings using flush tiles. Use two for 2’ or 4’ trac and three for 6’ or 8’ trac. Same as R37F with spacer for ceilings using drop tiles. To attach to inverted tee ceilings using flush or drop tiles. Use two for 2’ or 4’ trac and three for 6’ or 8’ trac. Adapts swag or chain-hung fixture to trac. Supports up to 25 lbs. Not UL Listed. Supports up to 25 lbs. Not UL Listed. Provides electrical receptacle. Not UL Listed. D2.1.0 TRAC-LITES One Circuit Trac System TRAC SECTIONS & SYSTEM COMPONENTS R Series 12949 5/21/2018 1300 S. Wolf Road • Des Plaines, IL 60018 • Phone (847) 827-9880 • Fax (847) 827-2925 • Visit us at www.acuitybrands.com/juno-trac Printed in U.S.A. ©2017 2018 Acuity Brands Lighting, Inc. Rev. 1/31/18 6 of 6 D2.1.0 TRAC-LITES One Circuit Trac System TRAC SECTIONS & SYSTEM COMPONENTS R Series 1 Standard “L” Connector – R24 2 Standard “T” Connector – R25 3 Reverse Polarity “T” Connector – R25 RP 4 Standard End Feed Connector – R38 5 Reverse Polarity End Feed Connector – R38 RP Possible Trac Configurations & Recommended Components 12949 5/21/2018 Project: Fixture Type: Location: Contact/Phone: 1 of 3 1300 S. Wolf Road • Des Plaines, IL 60018 • Phone (847) 827-9880 • Fax (847) 827-2925 • Visit us at www.acuitybrands.com/juno Printed in U.S.A. ©2017 Acuity Brands Lighting, Inc. Rev. 03/01/17 E6.1.2 DIMENSIONS SL212 and SL412 Series, Damp/Dry Location IndoorPRODUCT DESCRIPTION Juno FlexConnect linear lighting is a flexible architectural luminaire system featuring onboard current regulation for consistent light output from start to end of run. Delivering up to 425 lumens per foot, this system is ideal for coves, cabinetry, accent lighting, and other indoor architectural applications. Juno FlexConnect luminaires feature silicone encapsulation for durability, reliability, and ease of installation. Patent-pending optical pigment provides industry leading color quality. PRODUCT SPECIFICATIONS Construction Flexible, silicone encapsulated LED Light engine is equipped with 3M adhesive • Twelve (12) LEDs per foot • LEDs are evenly spaced every 1” • Onboard current regulation maintains consistent light output from start to end of run • Ratedfor indoor use only. Field-Cuttable Features integrated connectors every six (6) inches, allowing luminaire to be field cut and reconnected in six (6) inch increments. NOTE: MUST USE SLCUTTER FOR CUTTINGLUMINAIRE - see instructions. Color Quality Features patent-pending optical pigment resulting in industry leading color consistency within 3 SDCM • Available in 2200K, 2700K, 3000K, 3500K, and 4000K in 80 CRI • 2700K and 3000K are also available in 95 CRI • Pigmentedsilicone is UV resistant for excellent color consistency over life. Drivers Compatible with Juno Class 2, 24VDC remote mount drivers (ordered separately) • Dimmable drivers are available in 60W or 96W, 120-277V input, and are compatible with 0-10V, ELV, or Triac dimmers • Lutron Hi-Lume A-series 24VDC, 2-wire and 3-wire/EcoSystem compatible drivers are also available • For a list of compatible dimmers, refer to JUNOLINEARLED-DIM Run Length Supplied in 20’ spools • Beginning of spool features 12” of 22AWG wire which can be removed if longer starter cable is required • Minimum run length of 1’ • Maximum run length of 40’ for SL212 series and 20’ for SL412 series Operating Environment -30°C to 40°C, 95% humidity (non-condensing) Life Rated for L70 50,000 hours. Labels ETL/cETL listed for damp locations • CE certified. Product specifications subject to change without notice. PRODUCT CODES 24V Standard Output Flexible LED Strips - Damp Location Cat. #CCT CRIMin R9 Watts per Foot Lumens per Foot SL212 20FT 22K 80CRI 2200K 80 35 2.2 140 SL212 20FT 27K 80CRI 2700K 80 35 2.2 180 SL212 20FT 30K 80CRI 3000K 80 34 2.2 190 SL212 20FT 35K 80CRI 3500K 80 20 2.2 205 SL212 20FT 40K 80CRI 4000K 80 21 2.2 200 24V High Output Flexible LED Strips - Damp Location SL412 20FT 27K 80CRI 2700K 80 33 4.4 315 SL412 20FT 30K 80CRI 3000K 80 34 4.4 360 SL412 20FT 35K 80CRI 3500K 80 19 4.4 375 SL412 20FT 40K 80CRI 4000K 80 19 4.4 425 SL412 20FT 27K 95CRI 2700K 95 74 4.4 265 SL412 20FT 30K 95CRI 3000K 95 74 4.4 275 Order in 20’ spools. 12" 6" .200" .550" 12” 6” .160 .550 Warranty 5-year limited warranty. Complete warranty terms located at: http://www.acuitybrands.com/CustomerResources/Terms_and_Conditions.aspx JUNO® TASK LINEAR ACCENT 14410 5/21/2018 2 of 3 1300 S. Wolf Road • Des Plaines, IL 60018 • Phone (847) 827-9880 • Fax (847) 827-2925 • Visit us at www.acuitybrands.com/juno Printed in U.S.A. ©2017 Acuity Brands Lighting, Inc. Rev. 03/01/17 E6.1.2 SL212 and SL412 Series, Damp/Dry Location Indoor Class 2 Remote LED Driver Catalog # InputVoltage OutputVoltage MaxVoltage Dimming Min. Dim % Remote 24VDC Driver DLDPS 60W FPCZT 120-277 VAC 24VDC 60W 0-10V, ELV, Triac 5% DLDPS 96W FPCZT 120-277 VAC 24VDC 96W 0-10V, ELV, Triac 5% Lutron Hi-Lume, A-series, 3-wire DLDPS 40W ECOS3 120-277 VAC 24VDC 40W 3-wire & EcoSystem 1% DLDPS 96W ECOS3 120-277 VAC 24VDC 96W 3-wire & EcoSystem 0.1% Lutron Hi-Lume, A-series, 2-wire DLDPS 40W ECOS2 120 VAC 24VDC 40W 2-wire Forward Phase 1% Electrical Feeds Catalog #Description Length Starter Cable SL101P 36IN 22 AWG, CL2 rated starter cable, rated for in-wall use 36” SL101P 144IN 22 AWG, CL2 rated starter cable, rated for in-wall use 144” Terminal Block, Indoor SL101TB One end connects to strip. Accepts 14 to 20 AWG solid/stranded wire, including non-metallic sheathed cable. Straight Joiner Cables SL102FLX 2IN 22 AWG cable, 2”2” SL102FLX 6IN 22 AWG, CL2 rated cable, rated for in-wall use 6” SL102FLX 12IN 22 AWG, CL2 rated cable, rated for in-wall use 12” SL102FLX 36IN 22 AWG, CL2 rated cable, rated for in-wall use 36” SL102FLX 72IN 22 AWG, CL2 rated cable, rated for in-wall use 72” 3-way and 4-way Connectors SL102Y 3-way, 22 AWG, CL2 rated cable, rated for in-wall use 3” SL102X 4-way connector, accepts up to 4 strips or 1 feed and 3 strips DLDPS 60W FPCZT DLDPS 40W ECOS3 DLDPS 40W ECOS2 DLDPS 96W FPCZT 9.71” 2.9” 1.55” 12” 1.55” 2.9” DLDPS 96W ECOS3 5.5” 10.5” 2.0” 4.89” 4.0” 4.0” 2.62” 1.62” Starter Cable Straight Joiner CableTerminal Block 4 Way Connector3 Way Connector JUNO® TASK LINEAR ACCENT 14410 5/21/2018 3 of 3 1300 S. Wolf Road • Des Plaines, IL 60018 • Phone (847) 827-9880 • Fax (847) 827-2925 • Visit us at www.acuitybrands.com/juno Printed in U.S.A. ©2017 Acuity Brands Lighting, Inc. Rev. 03/01/17 E6.1.2 SL212 and SL412 Series, Damp/Dry Location Indoor Aluminum Channels Ordering Example: SM1 48IN CL BL Channel Type Nominal Length Lens Finish SM1 Low Profile Surface Mount 48IN**NL No Lens SA Satin Aluminum SM2 Deep Surface Mount CL Clear Lens BL Black SM3* 45 Degree Low Profile FR Frosted Lens WH White SM4 45 Degree Square SM5 45 Degree Round * Only available with ‘NL’ lens option ** Actual length is 49 inches long to accommodate luminaire connectors and power feed Endcaps included with lensed options SM2 Deep Surface Mount without Lens 0.91” 1.13” 0.91” 1.27” SM4 45 Deg. Square 1” 1.5” 1” SM5 45 Deg. Round 1” 1” 1.5” Mounting Accessories Catalog #Description Cutting Tool SLCUTTER SL Series Cutting Tool - REQUIRED TO FIELD CUT LUMINAIRE Mounting Clips SLCLIP SL Series Mounting Clips, Qty: 20 Cutting Tool Mounting Clips SM1 Low Profile Surface Mount without Lens 0.91” 0.44” 0.91” 0.59” SM1 Low Profile Surface Mount with Lens 0.91” 0.44” 0.91” 0.59” SM2 Deep Surface Mount with Lens 0.91” 1.13” 0.91” 1.27” SM3 45 Deg. Low Profile 0.75” 1” 0.75” JUNO® TASK LINEAR ACCENT 14410 5/21/2018 BLT Series LED 2BLT 2' x 2' LED LED 2BLT-2X2 Catalog Number Notes TypeFEATURES & SPECIFICATIONS INTENDED USE — The BLT Best-in-Value Low Profile LED luminaire features a popular center basket design that offers a clean, versatile style and volumetric distribution. High efficacy LED light engines deliver energy savings and low maintenance compared to traditional sources. An extensive selection of configurations and options make the BLT the perfect choice for many lighting applications including schools, offices and other commercial spaces, retail, hospitals and healthcare facilities. The low profile BLT design (2-3/8") also makes it an excellent choice for renovation projects. CONSTRUCTION — BLT enclosure components are die-formed for dimensional consistency and painted after fabrication with a polyester powder paint for improved performance and protection. The reflector is finished with a high reflective matte white powder paint for improved aesthetics and increased light diffusion. End plates contain easy-to-position integral T-bar clips for securely attaching the luminaire to the T-grid. For additional T-grid security, optional screw on T-bar clips are available. Diffusers are extruded from impact modified acrylic for increased durability. LED boards and drivers are accessible from the plenum. OPTICS — Volumetric illumination is achieved by creating an optimal mix of light to walls, partitions and vertical and horizontal work surfaces – rendering the interior space, objects and occupants in a more balanced, complimentary luminous environment. High performance extruded acrylic diffusers conceal LEDs and efficiently deliver light in a volumetric distribution. Four diffuser choices available - curved and square designs with linear prisms or a smooth frosted finish. ELECTRICAL — Long-life LEDs, coupled with high-efficiency drivers, provide superior quantity and quality of illumination for extended service life. 70% LED lumen maintenance at 60,000 hours (L70/60,000). Color Variation within 3-step MacAdam ellipse (3SDCM). Non-Configurable BLT: Generic 0-10 volt dimming driver. Dims to 10% Configurable BLT: available in High Efficiency (HE) versions for applications where a lower wattage (over the standard product) is required. The High Efficiency versions deliver >130 LPW and can be specified via the Lumen Package designations in the Ordering Information below. eldoLED driver options deliver choice of dimming range, and choices for control, while assuring flicker-free, low-current inrush, 89% efficiency and low EMI. Optional integrated nLight®controls make each luminaire addressable - allowing it to digitally communicate with other nLight enabled controls such as dimmers, switches, occupancy sensors and photocontrols. Connection to nLight is simple. It can be accomplished with integrated nLight AIR wireless or through standard Cat-5 cabling. nLight offers unique plug-and-play convenience as devices and luminaires automatically discover each other and self-commission, while nLight AIR is commissioned easily through an intuitive model app. Lumen Management: Unique lumen management system (option N80) provides on board intelligence that actively manages the LED light source so that constant lumen output is maintained over the system life, preventing the energy waste created by the traditional practice of over-lighting. Step-level dimming option allows system to be switched to 50% power for compliance with common energy codes while maintaining fixture appearance. Driver disconnect provided where required to comply with US and Canadian codes. SENSOR— Integrated sensor (individual control): Sensor Switch MSD7ADCX ((Passive infrared (PIR)) or MSDPDT7ADCX ((PIR/Microphonics Dual Tech (PDT)) integrated occupancy sensor/automatic dimming photocell allows the luminaire to power off when the space is unoccupied or enough ambient light is entering the space. See page 4 for more details on the integrated sensor. Integrated Sensor (nLight Wired Networking): This sensor is nLight-enabled, meaning it has the ability to communicate over an nLight network. When wired, using CAT-5 cabling, with other nLight-enabled sensors, power packs, or WallPods, an nLight control zone is created. Once linked to a Gateway, directly or via a Bridge, the zone becomes capable of remote status monitoring and control via SensorView software. See page 4 for the nLight sensor options. Integrated Smart Sensor (nLight Air Wireless Platform): The rES7 sensor is nLight AIR enabled, meaning it has the ability to communicate over the wireless nLight control platform. It is both a digital PIR occupancy sensor/automatic dimming photocell. It pairs to other luminaires and wall switches through our mobile app, CLAIRITY, which allows for simple sensor adjustment. See page 4 for more details on the Integrated Smart Sensor. INSTALLATION — The BLT’s low profile design of only 2-3/8” provides increased installation flexibility especially in restrictive plenum applications. The BLT fits into standard 15/16” and narrow 9/16” T-grid ceiling systems. Suitable for damp location. For recessed mounting in hard ceiling applications, Drywall Grid Adapters (DGA) are available as an accessory. See Accessories section. LISTINGS — CSA Certified to meet U.S. and Canadian standards. IC rated. DesignLights Consortium® (DLC) Premium qualified product. Not all versions of this product may be DLC Premium qualified. Please check the DLC Qualified Products List at www.designlights.org/QPL to confirm which versions are qualified. WARRANTY — 5-year limited warranty. Complete warranty terms located at www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx NOTE: Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 25 °C. Specifications subject to change without notice. Specifications Length: 23-3/4 (60.3) Width: 23-3/4 (60.3) Depth: 2-3/8 (6.0) Depth with Air supply/return: 2-3/4 (6.9) All dimensions are inches (centimeters) unless otherwise specified. Multiple Diffuser Options Square Ribbed Square Smooth Curved Ribbed ADP ADSM SDP SDSM Curved Smooth Capable Luminaire This item is an A+ capable luminaire, which has been designed and tested to provide consistent color appearance and out-of-the-box control compatibility with simple commissioning. • All configurations of this luminaire meet the Acuity Brands’ specification for chromatic consistency • This luminaire is part of an A+ Certified solution for nLight® control networks when ordered with drivers marked by a shaded background* • This luminaire is part of an A+ Certified solution for nLight control networks, providing advanced control functionality at the luminaire level, when selection includes driver and control options marked by a shaded background* To learn more about A+, visit www.acuitybrands.com/aplus. *See ordering tree for details DID 19022 5/21/2018 2BLT Volumetric Recessed Lighting 2'x2' 2BLT-2X2 LED: One Lithonia Way Conyers, GA 30012 Phone: 800-858-7763 www.lithonia.com © 2015-2017 Acuity Brands Lighting, Inc. All rights reserved. Rev. 12/07/17 ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative.Example: 2BLT2 33L ADP EZ1 LP835 2BLT2 Series Air function Lumens2 Diffuser Voltage Driver Color temperature 2BLT2 2X2 BLT (blank) Static A Air supply/ return1 Standard efficiency (>100 LPW) 20L 2000 33L 3300 40L 4000 High efficiency3,4 (>130 LPW) 33LHE 3300 40LHE 4000 48LHE 4800 ADP Curved, linear prisms ADSM Curved, smooth SDP Square, linear prisms SDSM Square, smooth Includes trim rings to match sensored version ADPT Curved, linear prisms ADSMT Curved, smooth SDPT Square, linear prisms SDSMT Square, smooth (blank)MVOLT 120 120V 277 277V 347 347V 5 EZ1 eldoLED dims to 1% (0-10 volt dimming) SLD Step-level dimming6 LE1 Lutron Ecosystem driver dims to 1% 6,7 LP830 82CRI, 3000 K LP835 82CRI, 3500 K LP840 82CRI, 4000 K LP850 82CRI, 5000 K LP930 90CRI, 3000K LP935 90CRI, 3500K LP940 90CRI, 4000K LP950 90CRI, 5000K Controls Occupancy control10 Options (blank)No nLight® N80 nLight® with 80% lumen management N80EMG nLight® with 80% lumen management For use with generator supply EM power8 N100 nLight® without lumen management N100EMG nLight® without lumen management For use with generator supply EM power8 NLTAIR nLight AIR enabled9 (blank)No sensor control nLight Wired Networking NES7 nLight™ nES 7 PIR integral occupancy sensor11 NESPDT7 nLight™ nES PDT 7 dual technology integral occupancy control11 NES7ADCX nLight™ nES 7 ADCX PIR integral occupancy sensor with automatic dimming photocell11 NESPDT7ADCX nLight™ nES PDT 7 dual technology integral occupancy sensor with automatic dimming photocell11 nLight Wireless Networking RES7N nLight AIR PIR integral occupancy sensor with automatic dimming photocell for Networking Capabilities Individual Control MSD7ADCX PIR integral occupancy sensor with automatic dimming control photocell6,12 MSDPDT7ADCX PDT integral occupancy sensor with automatic dimming control photocell6,12 nLight Wireless Zone RES7Z nLight AIR PIR integral occupancy sensor with automatic dimming photocell for zone control EL7L 700 lumen battery pack (non-CEC compliant) 13 EL14L 1400 lumen battery pack (non-CEC compliant) 13 EL14LSD 1400 lumen battery pack with self-diagnostic testing feature (non-CEC compliant) 13,14 E10WLCP EM Self-Diagnostic battery pack, 10W Constant Power, CEC compliant 13 CP Chicago plenum15 BGTD Bodine Generator Transfer Device 16 PWS1836 6’ pre-wire, 3/8” diameter, 18 gauge, 1 circuit PWS1846 6’ pre-wire, 3/8” diameter, 18 gauge, 2 circuit PWS1846 PWSLV Two cables: one 6' pre-wire, 3/8” diameter, 18 gauge, 2 circuits; one 6' pre-wire, 3/8” diameter, 18 gauge, purple and gray17 PWS1856LV 6’ pre-wire, 3/8” diameter, 18 gauge, 1 circuit w/low voltage purple and grey wires17 GLR Fast-blowing fuse18 GMF Slow-blowing fuse18 NPLT Narrow pallet RRL_ RELOC®-ready luminaire 19 LATC Earthquake clip DWAM Anti-Microbial paint JP32 Job packaging IP5X Gasketed diffuser compartment to meet IP5X rating20 Non-Configurable BLT Stock/MTO Catalog Description * UPC Lumens Wattage LPW Color Temperature Voltage Pallet Qty Stock 2BLT2 33L ADP LP835 00190887529708 3241 30 108 3500K/82 CRI 120-277 52 2BLT2 33L ADP LP840 00190887529739 3313 30 111 4000K/82CRI 120-277 52 2BLT2 33L ADP EL14L LP835 00190887529890 3241 30 108 3500K/82CRI 120-277 52 2BLT2 33L ADP EL14L LP840 00190887529937 3313 30 111 4000K/82CRI 120-277 52 MTO 2BLT2 33L ADP 347 LP835 3241 30 108 3500K/82 CRI 347 52 2BLT2 33L ADP 347 LP840 3313 30 111 4000K/82CRI 347 52 *Generic 0-10V Dimming to 10%. Notes and Accessories next page A+ Capable options indicated by this color background. 5/21/2018 2BLT Volumetric Recessed Lighting 2'x2' 2BLT-2X2 LED: One Lithonia Way Conyers, GA 30012 Phone: 800-858-7763 www.lithonia.com © 2015-2017 Acuity Brands Lighting, Inc. All rights reserved. Rev. 12/07/17 nLight® Wired Control Accessories: Order as separate catalog number. Visit www.acuitybrands.com/products/controls/nlight. WallPod stations Model number Occupancy sensors Model number On/Off nPODM [color] Small motion 360°, ceiling (PIR / dual tech) nCM 9 RJB / nCM PDT 9 RJB On/Off & raise/lower nPODM DX [color] Large motion 360°, ceiling (PIR / dual tech) nCM10 RJB / nCM PDT 10 RJB Graphic touchscreen nPOD GFX [color] Wall switch with raise/lower nWSX PDT LV DX [color] Photocell controls Model number Cat-5 cable (plenum rated)Model number Full range dimming nCM ADCX RJB 10' cable CAT5 10FT J1 30' cable CAT5 30FT J1 nLight® AIR Control Accessories: Order as separate catalog number. Visit www.acuitybrands.com/products/controls/nlightair. Wall switches Model number On/Off single pole rPODB [color] On/Off two pole rPODB 2P [color] On/Off & raise/lower single pole rPODB DX [color] On/Off & raise/lower two pole rPODB 2P DX [color] On/Off & raise/lower single pole rPODBZ DX WH1 Accessories: Order as separate catalog number. DGA22 Drywall grid adapter for 2x2 recessed fixture 2X2SMK Surface Mount Troffer Kit Replacement Parts: Order as separate catalog number. *247WJV 2DBLT24 ADP LENS ASSEMBLY 2 ft. replacement lens *249P2P 2DBLT24 SDP LENS ASSEMBLY 2 ft. replacement lens *249P2W 2DBLT24 ADSM LENS ASSEMBLY 2 ft. replacement lens *249P32 2DBLT24 SDSM LENS ASSEMBLY 2 ft. replacement lens *237LT1 2DBLT24 ADPT LENS ASSEMBLY 2 ft. replacement lens *237LT3 2DBLT24 SDPT LENS ASSEMBLY 2 ft. replacement lens *237LT5 2DBLT24 ADSMT LENS ASSEMBLY 2 ft. replacement lens *237LT7 2DBLT24 SDSMT LENS ASSEMBLY 2 ft. replacement lens *237LT9 2DBLT24 ADPT SENSOR LENS ASSEMBLY 2 ft. replacement lens *237M4Y 2DBLT24 SDPT SENSOR LENS ASSEMBLY 2 ft. replacement lens *237M57 2DBLT24 ADSMT SENSOR LENS ASSEMBLY 2 ft. replacement lens *237M5H 2DBLT24 SDSMT SENSOR LENS ASSEMBLY 2 ft. replacement lens Notes 1 Can only be ordered with the RES7Z zone control sensor version. Notes 1 Consult factory for airflow data. 2 Approximate lumen output. 3 All versions may not achieve 130+ LPW. Refer to photometry on www.acuitybrands.com. 4 Air supply/return option, 90 CRI, and versions with integral sensor trim rings may not achieve 130 LPW. 5 Not available with SLD EL7L, or EL14L options. 6 Not available with N80, N80EMG, N100, N100EMG, NLTAIR, or occupancy control. 7 Not available with controls, occupancy controls, or PWS options. Consult factory for Hi-Lume dimming. 8 nLight EMG option requires a connection to existing nLight network. Power is provided from a separate N80 or N100 enabled fixture. 9 Must order with RES7N or RES7Z sensor. Only available with EZ1 driver. 10 Must specify diffuser with trim rings. See sensor options on page 4. 11 Requires N80, N80EMG, N100, or N100EMG. 12 Only available with EZ1 driver option. 0-10v dimming wires not accessible via access plate. 13 When using pre-wire option, use PWS1846 or PWS1846 PWSLV. 14 For more information, please see the PSSD2 specification sheet. 15 Not available with N80, N80EMG, N100, or N100EMG. 16 Must specify voltage. Requires BSE labeling, voltage specific. Consult factory for options. 17 Not available with nLight wired/wireless network or individual controls. 18 Must specify voltage, 120 or 277, with GLR and GFM fusing. 19 For ordering logic consult RRL_2013. 20 Not available with air supply/return or Wired Networking (NES_) and Individual Control (MSD_) sensors. 5/21/2018 2BLT Volumetric Recessed Lighting 2'x2' 2BLT-2X2 LED: One Lithonia Way Conyers, GA 30012 Phone: 800-858-7763 www.lithonia.com © 2015-2017 Acuity Brands Lighting, Inc. All rights reserved. Rev. 12/07/17 Sensor Options Option Automatic Dimming Photocell Occupancy Sensing nLight Wired Networking nLight AIR Networking nLight AIR ZonePIR PDT MSD7ADCX X X MSDPDT7ADCX X X NES7 X X NES7ADCX X X X NESPDT7 X X NESPDT7ADCX X X X RES7N X X X RES7Z X X X Integrated Sensor with Individual Control The MSD7ADCX PIR occupancy sensor/automatic dimming photocell is ideal for areas without obstructions and where daylight harvesting may be desired. Suggested applications include, but not limited to, hallways, corridors, storage rooms, and breakrooms or other areas where people are typically moving. The MSDPDT7ADCX PIR/Microphonics Dual Tech occupancy sensor/automatic dimming photocell is ideal for areas with obstructions and where daylight harvesting is desired. Suggested applications include, but not limited to, open offices, private offices, classrooms, public restrooms, and conference rooms. Sequence of Operation MINLIGHT LEVELMAX 7.5 MINTIME DELAY 2.5 MIN ATA 1% LEVEL LIGHTS OFF LIGHTS ONLIGHTS ON Room UnoccupiedOccupantsDetected In The Space Sensor Detects Motion MOTION NO MOTION MOTION SEQUENCE OF OPERATION 5.5 18 4.6 15 3.7 12 2.7 9 1.8 6 0.9 3 0 m 0 ft 0.9 3 1.8 6 2.7 9 3.7 12 4.6 15 5.5 18 9 FT Mounting • Recommended for walking motion detection from mounting heights between 8 ft (2.44 m) and 20 ft (6.10 m) • Initial detection of walking motion along sensor axes at distances of 2x the mounting height up to 15 ft (4.57 m) and • 1.75x up to 20 ft (6.10 m). • Provides 12 ft (3.66 m) radial detection of small motion when mounted at 9 ft (2.74 m) • Initial detection will occur earlier when walking across sensor’s field of view than when walking directly at sensor Sensor Coverage Pattern Mini 360° Lens Basic nLight Zone *The presetting on the automatic dimming photocell is 5fc. nLight Wired Networking The nES 7 is ideal for small rooms without obstructions or areas with primarily walking motion. Ideal areas include hallways, corridors, storage rooms, and breakrooms. Additionally, the NES7ADCX includes an integrated photocell, which enables daylight harvesting controls. For areas like restrooms, private offices, open offices, conference rooms or any space with obstructions, the nES PDT 7 dual technology sensor is recommended. The nES PDT 7 utilizes both PIR (passive infrared) and Microphonics technologies to detect occupancy. Additionally, the NESPDT7ADCX includes an integrated photocell, which enables daylight harvesting controls which is ideal for areas where windows are present. nLight AIR Wireless nLight AIR is the ideal solution for retrofit or new construction spaces where adding additional wiring can be labor intensive and costly. The integrated rES 7 smart sensor is part of each luminaire in the nLight AIR network, which can be grouped to control multiple luminaires. The granularity of control with the digital PIR occupancy detection and daylight sensing makes a great solution for any application. Sequence of Operation MINLIGHT LEVELMAX 17.5 MINTIME DELAY 2.5 MIN ATA 1% LEVEL LIGHTS OFF LIGHTS ONLIGHTS ON Room UnoccupiedOccupantsDetected In The Space Sensor Detects Motion MOTION NO MOTION MOTION SEQUENCE OF OPERATION *The presetting on the automatic dimming photocell is 5fc. NH NH NH One Lithonia Way, Conyers, Georgia 30012 | Phone: 800.535.2465 | www.acuitycontrols.com/nlightair ©2016 Acuity Brands Lighting, Inc. All rights reserved. | NL_3162_0716 nLight AIR rPODB 2P DX Mobile Device BLT Series CLAIRITY Mobile App for Easy System Start-up • Intuitive mobile app for simplified zoning and sensor setting changes • App provides visual feedback to confirm changes to settings • Secure wireless system is enabled with user verification to keep your information safe • CLAIRITY is compatible with iOS7+, Google Android KitKat+ and associated devices • Automatically recognizes fixtures with wireless capability • Easily identify fixtures through blink feature • Pair fixtures with wireless wall switches and various sequences of operations • Group and name fixtures, i.e., Room 120 • Cloud connected saving all zoning and configuration setting in a space 1. Install the nLight® AIR fixtures with embedded smart sensor 2. Install the wireless battery-powered wall switch 3. With CLAIRITY app, pair the fixtures with the wall switch and if desired, customize the sensor settings for the desired outcome Simple as 1,2,3 A+ Certified solutions from Acuity Brands help you quickly and confidently select and implement lighting systems, for indoor or outdoor applications, that are both compatible and consistent. ™ The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Acuity Brands is under license. Other trademarks and trade names are those of their respective owners.5/21/2018 2BLT Volumetric Recessed Lighting 2'x2' 2BLT-2X2 LED: One Lithonia Way Conyers, GA 30012 Phone: 800-858-7763 www.lithonia.com © 2015-2017 Acuity Brands Lighting, Inc. All rights reserved. Rev. 12/07/17 PHOTOMETRICS 2BLT2 33L ADP LP835, 3241 delivered lumens, test no. LTL28918P4, tested in accordance to IESNA LM-79 2BLT2 40L ADP LP835, 4210 delivered lumens, test no. LTL28918P5, tested in accordance to IESNA LM-79 0° 20° 40° 60° 80° 90° 0°0°0° 90° 180° 200 400 600 800 1000 1200 1400 Coefficients of Utilization pf 20% pc 80% 70% 50% pw 70%50%30% 50%30%10% 50%30%10% 119 108 98 89 81 75 69 64 59 56 52 119 103 89 78 69 61 55 50 46 42 39 119 98 82 69 60 52 46 41 37 34 31 116 100 87 76 67 60 54 49 45 41 38 116 96 80 68 59 52 46 41 37 33 30 116 92 75 62 52 45 39 35 31 28 25 111 96 83 73 65 58 52 48 44 40 37 111 92 78 66 57 50 45 40 36 33 30 111 89 73 61 52 44 39 34 31 28 25RCR0 1 2 3 4 5 6 7 8 9 10 Zonal Lumen Summary Zone Lumens % Lamp % Fixture 0° - 30° 0° - 40° 0° - 60° 0° - 90° 90° - 180° 0° - 180° 1107 1799 3169 4211 0 4211 26.3 42.7 75.3 100.0 0.0 100.0 26.3 42.7 75.3 100.0 0.0 100.0 CP Summary 0° 90 0° 5° 15° 25° 35° 45° 55° 65° 75° 85° 90 1447 1419 1354 1224 1050 849 640 434 230 57 7 1447 1452 1396 1294 1158 1001 829 650 466 191 3 0° 20° 40° 60° 80° 90° 0°0°0° 90° 180° 200 400 600 800 1000 Coefficients of Utilization pf 20% pc 80% 70% 50% pw 70%50%30% 50%30%10% 50%30%10% 119 108 98 89 81 75 69 64 59 56 52 119 103 89 78 69 61 55 50 46 42 39 119 98 82 69 60 52 46 41 37 34 31 116 100 87 76 67 60 54 49 45 41 38 116 96 80 68 59 52 46 41 37 33 30 116 92 75 62 52 45 39 35 31 28 25 111 96 83 73 65 58 52 48 44 40 37 111 92 78 66 57 50 45 40 36 33 30 111 89 73 61 52 44 39 34 31 28 25RCR0 1 2 3 4 5 6 7 8 9 10 Zonal Lumen Summary Zone Lumens % Lamp % Fixture 0° - 30° 0° - 40° 0° - 60° 0° - 90° 90° - 180° 0° - 180° 852 1385 2440 3242 0 3242 26.3 42.7 75.3 100.0 0.0 100.0 26.3 42.7 75.3 100.0 0.0 100.0 CP Summary 0° 90 0° 5° 15° 25° 35° 45° 55° 65° 75° 85° 90 1114 1092 1042 943 808 653 492 334 177 44 5 1114 1118 1075 996 891 770 638 501 359 147 2 *DGA accessory available to provide ceiling trim flange and fixture support for plaster or plasterboard ceiling. Recommended rough-in dimensions for DGA installation is 24-3/4" x 24-3/4" (Tolerance is +1/8", -0”). 5/21/2018 2BLT Volumetric Recessed Lighting 2'x2' 2BLT-2X2 LED: One Lithonia Way Conyers, GA 30012 Phone: 800-858-7763 www.lithonia.com © 2015-2017 Acuity Brands Lighting, Inc. All rights reserved. Rev. 12/07/17 Performance Data Lumen Package Lumens Input Watts LPW 20L ADP LP830 2157 20 110 20L ADP LP835 2213 20 113 20L ADP LP840 2261 20 116 20L ADP LP850 2373 20 121 33L ADP LP830 3160 30 106 33L ADP LP835 3241 30 108 33L ADP LP840 3313 30 111 33L ADP LP850 3476 30 116 40L ADP LP830 4103 39 106 40L ADP LP835 4209 39 108 40L ADP LP840 4302 39 111 40L ADP LP850 4514 39 116 AIR 20L ADP LP830 2019 20 103 AIR 20L ADP LP835 2060 20 105 AIR 20L ADP LP840 2116 20 108 AIR 20L ADP LP850 2134 20 109 AIR 33L ADP LP830 2957 28 104 AIR 33L ADP LP835 3017 28 107 AIR 33L ADP LP840 3099 28 109 AIR 33L ADP LP850 3126 28 110 AIR 40L ADP LP830 3841 39 99 AIR 40L ADP LP835 3919 39 101 AIR 40L ADP LP840 4025 39 104 AIR 40L ADP LP850 4060 39 104 Constant Lumen Management Enabled by the embedded nLight control, the BLT actively tracks its run-time and manages its light source such that constant lumen output is maintained over the system life. Referred to as lumen management, this feature eliminates the energy waste created by the traditional practice of over-lighting. HE Performance Data Lumen Package Lumens Input Watts LPW 33LHE ADP LP830 3537 28 126 33LHE ADP LP835 3628 28 130 33LHE ADP LP840 3708 28 132 33LHE ADP LP850 3891 28 139 40LHE ADP LP830 4118 32 127 40LHE ADP LP835 4224 32 131 40LHE ADP LP840 4317 32 134 40LHE ADP LP850 4530 32 140 48LHE ADP LP830 4699 37 128 48LHE ADP LP835 4820 37 131 48LHE ADP LP840 4927 37 134 48LHE ADP LP850 5169 37 140 MOUNTING DATA Ceiling Type Appropriate Trim Type Exposed grid tee (1’ and 9/16”) G Concealed grid tee G Plaster or plasterboard G* *DGA accessory available to provide ceiling trim flange and fixture support for plaster or plasterboard ceiling. Recommended rough-in dimensions for DGA installation is 24-3/4" x 24-3/4" (Tolerance is +1/8", -0”). 9/16 Screw Slot15/16 01020304050 THOUSAND OPERATING HOURS 01020304050 THOUSAND OPERATING HOURS POWER INPUT LIGHTOUTPUT 100% 80% 100% 80% 30W 24W 30W 24WLIGHT OUTPUTLIGHT OUTPUT POWER INPUT POWER INPUTWithout Lumen Management Energy is wasted and light level is inconsistent. POWERINPUT LIGHT OUTPUT With Lumen Management Energy is saved and light level remains consistent. Wasted Energy Saved Energy 01020304050THOUSAND OPERATING HOURS 01020304050THOUSAND OPERATING HOURS POWER INPUT LIGHTOUTPUT 100% 80% 100% 80% 30W 24W 30W 24WLIGHT OUTPUTLIGHT OUTPUT POWER INPUT POWER INPUTWithout LumenManagement Energy is wasted and light level is inconsistent. POWERINPUT LIGHT OUTPUT With Lumen Management Energy is saved and light level remains consistent. Wasted Energy Saved Energy How to Calculate Delivered Lumens in Emergency Mode Use the formula below to determine the delivered lumens in emergency mode Delivered Lumens = 1.25 x P x LPW P = Ouput power of emergency driver. P = 10W for E10WLCP option. LPW = Lumen per watt rating of the luminaire. This information is available on the ABL luminaire spec sheet. LPW = Lumen per watt rating of the luminaire. LPW information available in Performance Data section. 5/21/2018 Project: Fixture Type: Location: Contact/Phone: 1 of 4 1300 S. Wolf Road • Des Plaines, IL 60018 • Phone (847) 827-9880 • Fax (847) 827-2925 • Visit us at www.acuitybrands.com/juno-recessed Printed in U.S.A. ©2015 - 2017 Acuity Brands Lighting, Inc. Rev. 12/22/17 G1.10.4G2 2” IC 600 AND 1000 LUMENS LED ROUND DOWNLIGHT CONE 2LEDTRIM G2 DC PRODUCT DESCRIPTION 2 inch aperture recessed downlight is IC rated for insulated or non-insulated applications • Luminaire produces up to 1000 lumens and is available with optical distributions approximating that of 75W MR16 halogen lamps • Low profile form factor allows luminaire to fit in 2 x 6 construction • Designed to provide 50,000 hours of life • 5 year limited warranty on LED Components. ENVIRONMENTALLY FRIENDLY, ENERGY EFFICIENT • No harmful ultraviolet or infrared wavelengths • No lead or mercury, RoHS compliant • Comparable light output up to a 75W MR16 halogen lamp PRODUCT SPECIFICATIONS LED Light Engine Exceptional fixture to fixture color consistency within a 3-step MacAdam ellipse • 2700K, 3000K, 3500K, and 4000K color temperatures are available with 80 CRI or 90 CRI minimum. Modular Optics Available with field interchangeable optics in 18° Spot, 24° Narrow Flood, or 40° Flood distributions. Aesthetic Trim Trim features die cast beveled knife edge trim ring for clean ceiling interface available in white, black, satin nickel, or brushed bronze • Spun aluminum reflectors are available in clear, haze, wheat haze, black and white finishes. LED Driver Choice of dedicated 120 volt (120) driver or universal voltage (MVOLT) driver that accommodates input voltages from 120-277 volts AC at 50/60Hz • Power factor > 0.9 • Dedicated 120 volt driver (120) is dimmable with the use of most incandescent, magnetic low voltage and electronic low voltage dimmers • Universal voltage driver (MVOLT) is dimmable with the use of most 0-10V protocol dimmers • For a list of compatible dimmers, see JUNO2ING2-DIM. Life Rated for 50,000 hours at 70% lumen maintenance. Labels ENERGY STAR® Certified • 90CRI fixtures are certified to the high efficacy requirements of California T24 JA8-2016 • Meets energy code Air Leakage requirements per ASTM E283 • UL and cUL listed for wet locations. Junction Box Includes (2) ½” knock-outs equipped with pryout slots •Push-in electrical connectors for field connections. Mounting Remodel style plaster frame installs from below the ceiling and accommodates ceiling thicknesses from ½” to 1” • For thicker ceilings up to 1 ½”, order 2JCTA150 • New Construction mounting frame, 2NCMF, is also available with Patented (US Patent D552,969) Real Nail 3® telescoping bar hangers to position fixture and locate wiring prior to ceiling installation • Recommend a minimum of 5.5” cavity depth to install properly • Flexible supply is recommended and non-flexible supply requires top access. Specifications subject to change without notice. Dedicated 120V (120)Universal Voltage (MVOLT) Voltage 120 120 277 Input Power 7.5 (±5%) 7.2 7.5 (±5%) Input Current .06 .06 .03 Frequency 50/60Hz 50/60Hz Power Factor >0.9 >0.9 >0.9 ENGINEERING DATA (600L) Dedicated 120V (120)Universal Voltage (MVOLT) Voltage 120 120 277 Input Power 11.5 (±5%) 10.9 11.4 (±5%) Input Current .10 .09 .04 Frequency 50/60Hz 50/60Hz Power Factor >0.9 >0.9 >0.9 ENGINEERING DATA (1000L) Downlight Cone Finishes DIMENSIONS 11 9/16” 4 1/8” 3 1/8” 2 5/8” CEILING CUTOUT 2” APERTURE HZSN BWH CWH WWH WHZBZ HZWH BBL 7” 19023 5/21/2018 2 of 4 1300 S. Wolf Road • Des Plaines, IL 60018 • Phone (847) 827-9880 • Fax (847) 827-2925 • Visit us at www.acuitybrands.com/juno-recessed Printed in U.S.A. ©2015 - 2017 Acuity Brands Lighting, Inc. Rev. 12/22/17 Example: 2LEDDRIVER G2 06LM 120 FRPC Series Generation Lumens Voltage Driver 2LEDDRIVER Juno Recessed 2” Driver G2 Generation 2 06LM 600 Nominal Lumens 120 120V FRPC Forward/Reverse Phase Cut 10LM 1000 Nominal Lumens MVOLT Multi-Volt (120- 277V) ZT 0-10V Dimming Note: 120V must be ordered with FRPC. MVOLT must be ordered with ZT ORDERING INFORMATION DRIVER AND TRIM EACH ORDERED SEPARATELY. DRIVER: TRIM: ACCESSORIES Catalog No.Description 2NCMF New Construction Mounting Frame with Real Nail® 3 bar hangers 2JCTA150 Thick Ceiling adapter for 1” - 1½” thick ceiling LEDOPTIC2 SP 18° Spot Optic LEDOPTIC2 NFL 24° Narrow Flood Optic LEDOPTIC2 FL 40° Flood Optic TRIM/LED ASSEMBLY MOUNTING FRAME/DRIVER ASSEMBLY Note: Driver assembly only intended for use with Gen2 LED trim modules. Not backward compatible with previous generation. Example: 2LEDTRIM G2 DC 27K 80CRI FL BBL Series Generation Trim Designation Color Temperature CRI Distribution Trim Finish 2LEDTRIM Juno Recessed 2” LED Trim G2 Generation 2 DC Downlight Cone 27K 2700K 80CRI 80+ CRI FL Flood BBL Black Reflector, Black Trim Ring 30K 3000K 90CRI 90+ CRI NFL Narrow Flood BWH Black Reflector, White Trim Ring 35K 3500K SP Spot CWH Clear Alzak Reflector, White Trim Ring 40K 4000K HZWH Haze Reflector, White Trim Ring WWH White Reflector, White Trim Ring WHZBZ Wheat Haze Reflector, Bronze Trim Ring HZSN Haze Reflector, Satin Nickel Trim Ring 12 5/8” 15 15/16” 10 13/64” 13 1/2” will expand to 25” (Reduces to 9 1/8” with breakaway feature) 2NCMF 2JCTA150 G1.10.4G2 2” IC 600 AND 1000 LUMENS LED ROUND DOWNLIGHT CONE 2LEDTRIM G2 DC 2" RECESSED MOUNTING FRAME 19023 5/21/2018 3 of 4 1300 S. Wolf Road • Des Plaines, IL 60018 • Phone (847) 827-9880 • Fax (847) 827-2925 • Visit us at www.acuitybrands.com/juno-recessed Printed in U.S.A. ©2015 - 2017 Acuity Brands Lighting, Inc. Rev. 12/22/17 PHOTOMETRICS AVERAGE INITIAL FOOTCANDLES Multiple Units (Square Array, 60’x60’ room) Reflectances: Ceiling 80%, Wall 50%, Floor 20% Spacing RCR1 RCR3 RCR5 4'55 50 46 5'35 32 29 6'24 22 20 7'20 18 17 8'16 14 13 9'12 11 10 10'9 8 7 ZONAL LUMEN SUMMARY Zone Lumens %Lamp %Fixture 0-30°718 N/A 92.8 0-40°762 N/A 98.5 0-60°774 N/A 100.0 0-90°774 N/A 100.0 LUMINANCE (Average cd/m2) Degrees Average Luminance 45°6383 55°1455 65°0 75°0 85°0 INITIAL FOOTCANDLES (One Unit, 7.5W, 19.6° Beam) Distance to Illuminated Plane (Feet)Footcandles Beam Center Beam Diameter 4'248.3 1.4 6'110.3 2.1 8'62.1 2.8 10'39.7 3.5 12'27.6 4.1 CANDLEPOWER DISTRIBUTION (Candelas) DegreesVertical 0° 0 3972 5 3449 15 1007 25 318 35 53 45 12 55 2 65 0 75 0 85 0 90 0 PHOTOMETRIC REPORT Test Report#: PT07162131 Catalog No: 2LEDTRIM G2 DC 35K 80CRI SP CWH (600L), Clear Cone with Spot Optic Luminaire Spacing Criteria: 0.34 Luminaire LPW: 103 800 1600 2400 3200 4000 0°15° 30° 45° 60° 75° 90° LUMINANCE (Average cd/m2) Degrees Average Luminance 45°5900 55°1785 65°0 75°0 85°0 AVERAGE INITIAL FOOTCANDLES Multiple Units (Square Array, 60’x60’ room) Reflectances: Ceiling 80%, Wall 50%, Floor 20% Spacing RCR1 RCR3 RCR5 4'53 48 43 5'34 30 28 6'23 21 19 7'19 17 16 8'15 14 12 9'11 10 9 10'8 8 7 ZONAL LUMEN SUMMARY Zone Lumens %Lamp %Fixture 0-30°686 N/A 91.8 0-40°735 N/A 98.3 0-60°747 N/A 100.0 0-90°747 N/A 100.0 INITIAL FOOTCANDLES (One Unit, 7.5W, 24.3° Beam) Distance to Illuminated Plane (Feet)Footcandles Beam Center Beam Diameter 4'185.2 1.7 6'82.3 2.6 8'46.3 3.4 10'29.6 4.3 12'20.6 5.2 CANDLEPOWER DISTRIBUTION (Candelas) DegreesVertical 0° 0 2963 5 2681 15 1032 25 344 35 64 45 11 55 3 65 0 75 0 85 0 90 0 PHOTOMETRIC REPORT Test Report#: PT07162136 Catalog No: 2LEDTRIM G2 DC 35K 80CRI NFL CWH (600L), Clear Cone with Narrow Flood Optic Luminaire Spacing Criteria: 0.42 Luminaire LPW: 100 600 1200 1800 2400 3000 0°15° 30° 45° 60° 75° 90° LUMINANCE (Average cd/m2) Degrees Average Luminance 45°11157 55°1785 65°0 75°0 85°0 AVERAGE INITIAL FOOTCANDLES Multiple Units (Square Array, 60’x60’ room) Reflectances: Ceiling 80%, Wall 50%, Floor 20% Spacing RCR1 RCR3 RCR5 4'54 48 43 5'35 31 28 6'24 21 19 7'20 17 15 8'15 14 12 9'12 10 9 10'9 8 7 ZONAL LUMEN SUMMARY Zone Lumens %Lamp %Fixture 0-30°644 N/A 83.1 0-40°752 N/A 97.1 0-60°775 N/A 100.0 0-90°775 N/A 100.0 INITIAL FOOTCANDLES (One Unit, 7.5W, 35.7° Beam) Distance to Illuminated Plane (Feet)Footcandles Beam Center Beam Diameter 4'104.3 2.6 6'46.4 3.9 8'26.1 5.2 10'16.7 6.4 12'11.6 7.7 CANDLEPOWER DISTRIBUTION (Candelas) Degrees Vertical 0° 0 1669 5 1524 15 968 25 519 35 167 45 21 55 3 65 0 75 0 85 0 90 0 PHOTOMETRIC REPORT Test Report#: PT07162141 Catalog No: 2LEDTRIM G2 DC 35K 80CRI FL CWH (600L), Clear Cone with Flood Optic Luminaire Spacing Criteria: 0.58 Luminaire LPW: 103 400 800 1200 1600 2000 0°15° 30° 45° 60° 75° 90° Fixtures tested to IES recommended standard for solid state lighting per LM-79-08. Photometric performance on a single unit represents a baseline of performance for the fixture. Results may vary in the field. Multiplier: 80 CRI 90 CRI 27K = .94 27K = .83 30K = .97 30K = .86 35K = 1.00 35K = .88 40K = 1.03 40K = .90 G1.10.4G2 2” IC 600 AND 1000 LUMENS LED ROUND DOWNLIGHT CONE 2LEDTRIM G2 DC 19023 5/21/2018 4 of 4 1300 S. Wolf Road • Des Plaines, IL 60018 • Phone (847) 827-9880 • Fax (847) 827-2925 • Visit us at www.acuitybrands.com/juno-recessed Printed in U.S.A. ©2015 - 2017 Acuity Brands Lighting, Inc. Rev. 12/22/17 AVERAGE INITIAL FOOTCANDLES Multiple Units (Square Array, 60’x60’ room) Reflectances: Ceiling 80%, Wall 50%, Floor 20% Spacing RCR1 RCR3 RCR5 4'83 75 69 5'53 48 44 6'37 33 31 7'30 27 25 8'23 21 20 9'18 16 15 10'13 12 11 ZONAL LUMEN SUMMARY Zone Lumens %Lamp %Fixture 0-30°1085 N/A 92.8 0-40°1151 N/A 98.5 0-60°1168 N/A 100.0 0-90°1169 N/A 100.0 LUMINANCE (Average cd/m2) Degrees Average Luminance 45°9638 55°2197 65°0 75°0 85°0 INITIAL FOOTCANDLES (One Unit, 11.5W, 19.6° Beam) Distance to Illuminated Plane (Feet)Footcandles Beam Center Beam Diameter 4'374.8 1.4 6'166.6 2.1 8'93.7 2.8 10'60.0 3.5 12'41.6 4.1 CANDLEPOWER DISTRIBUTION (Candelas) DegreesVertical 0° 0 5997 5 5209 15 1520 25 481 35 80 45 18 55 3 65 0 75 0 85 0 90 0 PHOTOMETRIC REPORT Test Report#: PT07162131R Catalog No: 2LEDTRIM G2 DC 35K 80CRI SP CWH (1000L), Clear Cone with Spot Optic Luminaire Spacing Criteria: 0.34 Luminaire LPW: 102 1200 2400 3600 4800 6000 0°15° 30° 45° 60° 75° 90° LUMINANCE (Average cd/m2) Degrees Average Luminance 45°9027 55°2732 65°0 75°0 85°0 AVERAGE INITIAL FOOTCANDLES Multiple Units (Square Array, 60’x60’ room) Reflectances: Ceiling 80%, Wall 50%, Floor 20% Spacing RCR1 RCR3 RCR5 4'81 73 66 5'52 47 43 6'36 32 30 7'29 26 24 8'23 21 19 9'18 16 14 10'13 12 11 ZONAL LUMEN SUMMARY Zone Lumens %Lamp %Fixture 0-30°1049 N/A 91.8 0-40°1124 N/A 98.3 0-60°1143 N/A 100.0 0-90°1143 N/A 100.0 INITIAL FOOTCANDLES (One Unit, 11.5W, 24.3° Beam) Distance to Illuminated Plane (Feet)Footcandles Beam Center Beam Diameter 4'283.3 1.7 6'125.9 2.6 8'70.8 3.4 10'45.3 4.3 12'31.5 5.2 CANDLEPOWER DISTRIBUTION (Candelas) DegreesVertical 0° 0 4533 5 4102 15 1579 25 526 35 98 45 17 55 4 65 0 75 0 85 0 90 0 PHOTOMETRIC REPORT Test Report#: PT07162136R Catalog No: 2LEDTRIM G2 DC 35K 80CRI NFL CWH (1000L), Clear Cone with Narrow Flood Optic Luminaire Spacing Criteria: 0.42 Luminaire LPW: 99 900 1800 2700 3600 4500 0°15° 30° 45° 60° 75° 90° LUMINANCE (Average cd/m2) Degrees Average Luminance 45°17182 55°2750 65°0 75°0 85°0 AVERAGE INITIAL FOOTCANDLES Multiple Units (Square Array, 60’x60’ room) Reflectances: Ceiling 80%, Wall 50%, Floor 20% Spacing RCR1 RCR3 RCR5 4'84 74 66 5'53 47 42 6'37 33 29 7'30 27 24 8'24 21 19 9'18 16 14 10'13 12 11 ZONAL LUMEN SUMMARY Zone Lumens %Lamp %Fixture 0-30°991 N/A 83.1 0-40°1159 N/A 97.1 0-60°1193 N/A 100.0 0-90°1193 N/A 100.0 INITIAL FOOTCANDLES (One Unit, 11.5W, 35.7° Beam) Distance to Illuminated Plane (Feet)Footcandles Beam Center Beam Diameter 4'160.7 2.6 6'71.4 3.9 8'40.2 5.2 10'25.7 6.4 12'17.9 7.7 CANDLEPOWER DISTRIBUTION (Candelas) DegreesVertical 0° 0 2571 5 2346 15 1490 25 799 35 256 45 32 55 4 65 0 75 0 85 0 90 0 PHOTOMETRIC REPORT Test Report#: PT07162141R Catalog No: 2LEDTRIM G2 DC 35K 80CRI FL CWH (1000L), Clear Cone with Flood Optic Luminaire Spacing Criteria: 0.58 Luminaire LPW: 104 500 1000 1500 2000 2500 0°15° 30° 45° 60° 75° 90° Fixtures tested to IES recommended standard for solid state lighting per LM-79-08. Photometric performance on a single unit represents a baseline of performance for the fixture. Results may vary in the field. Multiplier: 80 CRI 90 CRI 27K = .94 27K = .83 30K = .97 30K = .86 35K = 1.00 35K = .88 40K = 1.03 40K = .90 G1.10.4G2 2” IC 600 AND 1000 LUMENS LED ROUND DOWNLIGHT CONE 2LEDTRIM G2 DC PHOTOMETRICS 19023 5/21/2018 Project: Fixture Type: Location: Contact/Phone: 1 of 5 1300 S. Wolf Road • Des Plaines, IL 60018 • Phone (847) 827-9880 • Fax (847) 827-2925 • Visit us at www.acuitybrands.com/juno-recessed Printed in U.S.A. ©2015 - 2017 Acuity Brands Lighting, Inc. Rev. Rev. 05/22/17 G1.10.1G2 2” IC 600 AND 1000 LUMENS LED ROUND ADJUSTABLE 2LEDTRIM G2 ADJ PRODUCT DESCRIPTION 2 inch aperture recessed downlight is IC rated for insulated or non-in- sulated applications • Luminaire produces up to 1000 lumens and is available with optical distributions approximating that of 75W MR16 halogen lamps • Low profile form factor allows luminaire to fit in 2 x 6 construction • Designed to provide 50,000 hours of life • 5 year limited warranty on LED Components. ENVIRONMENTALLY FRIENDLY, ENERGY EFFICIENT • No harmful ultraviolet or infrared wavelengths • No lead or mercury, RoHS compliant • Comparable light output up to a 75W MR16 halogen lamp PRODUCT SPECIFICATIONS LED Light Engine Exceptional fixture to fixture color consistency within a 3-step MacAdam ellipse • 2700K, 3000K, 3500K, and 4000K color temperatures are available with 80 CRI or 90 CRI minimum. Modular Optics Available with field interchangeable optics in 18° Spot, 24° Narrow Flood, or 40° Flood distributions. Aesthetic Trim Trim features die cast beveled knife edge trim ring for clean ceiling interface available in white, black, satin nickel, or brushed bronze • Die cast baffles are available in white, black, satin nickel, or brushed bronze LED Driver Choice of dedicated 120 volt (120) driver or universal voltage (MVOLT) driver that accommodates input voltages from 120-277 volts AC at 50/60Hz • Power factor > 0.9 • Dedicated 120 volt driver (120) is dimmable with the use of most incandescent, magnetic low voltage and electronic low voltage dimmers • Universal voltage driver (MVOLT) is dimmable with the use of most 0-10V protocol dimmers • For a list of compatible dimmers, see JUNO2ING2-DIM. Life Rated for 50,000 hours at 70% lumen maintenance. Labels ENERGY STAR® Certified • 90CRI fixtures are certified to the high efficacy requirements of California T24 JA8-2016 • Meets energy code Air Leakage requirements per ASTM E283 • UL and cUL listed for wet locations. Junction Box Includes (2) ½” knock-outs equipped with pryout slots • Push-in electrical connectors for field connections. Mounting Remodel style plaster frame installs from below the ceiling and accommodates ceiling thicknesses from ½” to 1” •For thicker ceilings up to 1 ½”, order 2JCTA150 •New Construction mounting frame, 2NCMF, is also available with Patented (US Patent D552,969) Real Nail 3® telescoping bar hangers to position fixture and locate wiring prior to ceiling installation • Recommend a minimum of 5.5” cavity depth to install properly • Flexible supply is recommended and non-flexible supply requires top access. Specifications subject to change without notice. Dedicated 120V (120)Universal Voltage (MVOLT) Voltage 120 120 277 Input Power 7.5 (±5%) 7.2 7.5 (±5%) Input Current .06 .06 .03 Frequency 50/60Hz 50/60Hz Power Factor >0.9 >0.9 >0.9 ENGINEERING DATA (600L) Dedicated 120V (120)Universal Voltage (MVOLT) Voltage 120 120 277 Input Power 11.5 (±5%) 10.9 11.4 (±5%) Input Current .10 .09 .04 Frequency 50/60Hz 50/60Hz Power Factor >0.9 >0.9 >0.9 ENGINEERING DATA (1000L) 2 5/8” CEILING CUTOUT DIMENSIONS 11 9/16” 4 1/8” 3 1/8” Trim Finishes BZSNBLWH 7” 19036 5/21/2018 2 of 5 1300 S. Wolf Road • Des Plaines, IL 60018 • Phone (847) 827-9880 • Fax (847) 827-2925 • Visit us at www.acuitybrands.com/juno-recessed Printed in U.S.A. ©2015 - 2017 Acuity Brands Lighting, Inc. Rev. Rev. 05/22/17 Example: 2LEDDRIVER G2 06LM 120 FRPC Series Generation Lumens Voltage Driver 2LEDDRIVER Juno Recessed 2” Driver G2 Generation 2 06LM 600 Nominal Lumens 120 120V FRPC Forward/Reverse Phase Cut 10LM 1000 Nominal Lumens MVOLT Multi-Volt (120- 277V) ZT 0-10V Dimming Note: 120V must be ordered with FRPC. MVOLT must be ordered with ZT Example: 2LEDTRIM G2 ADJ 27K 80CRI FL BL Series Generation Trim Designation Color Temperature CRI Distribution Trim Finish 2LEDTRIM Juno Recessed 2” LED Trim G2 Generation 2 ADJ Round Adjustable 27K 2700K 80CRI 80+ CRI FL Flood BL Black 30K 3000K 90CRI 90+ CRI NFL Narrow Flood BZ Bronze 35K 3500K SP Spot SN Satin Nickel 40K 4000K WH White ORDERING INFORMATION DRIVER AND TRIM EACH ORDERED SEPARATELY. DRIVER: TRIM: ACCESSORIES Catalog No.Description 2NCMF New Construction Mounting Frame with Real Nail® 3 bar hangers 2JCTA150 Thick Ceiling adapter for 1” - 1½” thick ceiling LEDOPTIC2 SP 18° Spot Optic LEDOPTIC2 NFL 24° Narrow Flood Optic LEDOPTIC2 FL 40° Flood Optic TRIM/LED ASSEMBLY MOUNTING FRAME/DRIVER ASSEMBLY Note: Driver assembly only intended for use with Gen2 LED trim modules. Not backward compatible with previous generation. 12 5/8” 15 15/16” 10 13/64” 13 1/2” will expand to 25” (Reduces to 9 1/8” with breakaway feature) 2NCMF 2JCTA150 G1.10.1G2 2” IC 600 AND 1000 LUMENS LED ROUND ADJUSTABLE 2LEDTRIM G2 ADJ 19036 5/21/2018 3 of 5 1300 S. Wolf Road • Des Plaines, IL 60018 • Phone (847) 827-9880 • Fax (847) 827-2925 • Visit us at www.acuitybrands.com/juno-recessed Printed in U.S.A. ©2015 - 2017 Acuity Brands Lighting, Inc. Rev. Rev. 05/22/17 LUMINANCE (Average cd/m2) Degrees Average Luminance 45°81296 55°41627 65°29721 75°27982 85°27265 AVERAGE INITIAL FOOTCANDLES Multiple Units (Square Array, 60’x60’ room) Reflectances: Ceiling 80%, Wall 50%, Floor 20% Spacing RCR1 RCR3 RCR5 4'50 44 39 5'32 28 25 6'22 19 17 7'18 16 14 8'14 12 11 9'11 10 8 10'8 7 6 ZONAL LUMEN SUMMARY Zone Lumens %Lamp %Fixture 0-30°552 N/A 77.4 0-40°633 N/A 88.8 0-60°694 N/A 97.2 0-90°714 N/A 100.0 INITIAL FOOTCANDLES (One Unit, 7.5W, 24.4° Beam) Distance to Illuminated Plane (Feet)Footcandles Beam Center Beam Diameter 4'142.9 1.7 6'63.5 2.6 8'35.7 3.5 10'22.9 4.3 12'15.9 5.2 CANDLEPOWER DISTRIBUTION (Candelas) Degrees Vertical 0° 0 2286 5 2009 15 840 25 304 35 127 45 51 55 21 65 11 75 6 85 2 90 0 PHOTOMETRIC REPORT Test Report#: PT07161926 Catalog No: 2LEDTRIM G2 ADJ 35K 80CRI NFL WH (600L), Adj Gimbal with Narrow Flood Optic Luminaire Spacing Criteria: 0.42 Luminaire LPW: 95 500 1000 1500 2000 2500 0°15° 30° 45° 60° 75° 90° 0°15° 30° 45° LUMINANCE (Average cd/m2) Degrees Average Luminance 45°81936 55°34328 65°26240 75°24484 85°27265 PHOTOMETRIC REPORT Test Report#: PT07161925 Catalog No: 2LEDTRIM G2 ADJ 35K 80CRI SP WH (600L), Adj Gimbal with Spot Optic Luminaire Spacing Criteria: 0.32 Luminaire LPW: 95 AVERAGE INITIAL FOOTCANDLES Multiple Units (Square Array, 60’x60’ room) Reflectances: Ceiling 80%, Wall 50%, Floor 20% Spacing RCR1 RCR3 RCR5 4'49 44 39 5'32 28 25 6'22 19 17 7'18 16 14 8'14 12 11 9'11 10 9 10'8 7 6 ZONAL LUMEN SUMMARY Zone Lumens %Lamp %Fixture 0-30°560 N/A 78.5 0-40°638 N/A 89.5 0-60°695 N/A 97.5 0-90°713 N/A 100.0 INITIAL FOOTCANDLES (One Unit, 7.5W, 17.7° Beam) Distance to Illuminated Plane (Feet)Footcandles Beam Center Beam Diameter 4'193.1 1.2 6'85.8 1.9 8'48.3 2.5 10'30.9 3.1 12'21.5 3.7 CANDLEPOWER DISTRIBUTION (Candelas) DegreesVertical 0° 0 3090 5 2523 15 816 25 275 35 127 45 51 55 17 65 10 75 6 85 2 90 0 600 1200 1800 2400 3000 60° 75° 90° AVERAGE INITIAL FOOTCANDLES Multiple Units (Square Array, 60’x60’ room) Reflectances: Ceiling 80%, Wall 50%, Floor 20% Spacing RCR1 RCR3 RCR5 4'50 43 38 5'32 27 24 6'22 19 17 7'18 15 14 8'14 12 11 9'11 9 8 10'8 7 6 ZONAL LUMEN SUMMARY Zone Lumens %Lamp %Fixture 0-30°531 N/A 74.3 0-40°639 N/A 89.5 0-60°702 N/A 98.4 0-90°714 N/A 100.0 LUMINANCE (Average cd/m2) Degrees Average Luminance 45°88657 55°39852 65°19814 75°13116 85°1298 INITIAL FOOTCANDLES (One Unit, 7.5W, 43.1° Beam) Distance to Illuminated Plane (Feet)Footcandles Beam Center Beam Diameter 4'71.3 3.2 6'31.7 4.7 8'17.8 6.3 10'11.4 7.9 12'7.9 9.5 CANDLEPOWER DISTRIBUTION (Candelas) DegreesVertical 0° 0 1141 5 1105 15 823 25 439 35 168 45 55 55 20 65 7 75 3 85 0 90 0 PHOTOMETRIC REPORT Test Report#: PT07161927 Catalog No: 2LEDTRIM G2 ADJ 35K 80CRI FL WH (600L), Adj Gimbal with Flood Optic Luminaire Spacing Criteria: 0.70 Luminaire LPW: 95 225 450 675 900 1125 0°15° 30° 45° 60° 75° 90° Fixtures tested to IES recommended standard for solid state lighting per LM-79-08. Photometric performance on a single unit represents a baseline of performance for the fixture. Results may vary in the field. Multiplier: 80 CRI 90 CRI 27K = .94 27K = .83 30K = .97 30K = .86 35K = 1.00 35K = .88 40K = 1.03 40K = .90 G1.10.1G2 2” IC 600 AND 1000 LUMENS LED ROUND ADJUSTABLE 2LEDTRIM G2 ADJ PHOTOMETRICS 19036 5/21/2018 4 of 5 1300 S. Wolf Road • Des Plaines, IL 60018 • Phone (847) 827-9880 • Fax (847) 827-2925 • Visit us at www.acuitybrands.com/juno-recessed Printed in U.S.A. ©2015 - 2017 Acuity Brands Lighting, Inc. Rev. Rev. 05/22/17 PHOTOMETRICS AVERAGE INITIAL FOOTCANDLES Multiple Units (Square Array, 60’x60’ room) Reflectances: Ceiling 80%, Wall 50%, Floor 20% Spacing RCR1 RCR3 RCR5 4'75 65 57 5'48 41 37 6'33 29 25 7'27 23 21 8'21 18 16 9'16 14 12 10'12 10 9 ZONAL LUMEN SUMMARY Zone Lumens %Lamp %Fixture 0-30°800 N/A 74.2 0-40°963 N/A 89.3 0-60°1060 N/A 98.3 0-90°1078 N/A 100.0 LUMINANCE (Average cd/m2) Degrees Average Luminance 45°133786 55°60961 65°31327 75°21861 85°9088 INITIAL FOOTCANDLES (One Unit, 11.4W, 43.2° Beam) Distance to Illuminated Plane (Feet)Footcandles Beam Center Beam Diameter 4'107.6 3.2 6'47.8 4.8 8'26.9 6.3 10'17.2 7.9 12'12.0 9.5 CANDLEPOWER DISTRIBUTION (Candelas) DegreesVertical 0° 0 1721 5 1665 15 1242 25 664 35 253 45 84 55 31 65 12 75 5 85 1 90 0 PHOTOMETRIC REPORT Test Report#: PT07161930 Catalog No: 2LEDTRIM G2 ADJ 35K 80CRI FL WH (1000L), Adj Gimbal with Flood Optic Luminaire Spacing Criteria: 0.70 Luminaire LPW: 95 400 800 1200 1600 2000 0°15° 30° 45° 60° 75° 90° LUMINANCE (Average cd/m2) Degrees Average Luminance 45°123544 55°63526 65°46322 75°44158 85°48039 AVERAGE INITIAL FOOTCANDLES Multiple Units (Square Array, 60’x60’ room) Reflectances: Ceiling 80%, Wall 50%, Floor 20% Spacing RCR1 RCR3 RCR5 4'75 67 59 5'48 43 38 6'34 30 26 7'27 24 21 8'21 19 17 9'16 14 13 10'12 11 9 ZONAL LUMEN SUMMARY Zone Lumens %Lamp %Fixture 0-30°842 N/A 77.4 0-40°964 N/A 88.7 0-60°1056 N/A 97.1 0-90°1087 N/A 100.0 INITIAL FOOTCANDLES (One Unit, 11.4W, 24.4° Beam) Distance to Illuminated Plane (Feet)Footcandles Beam Center Beam Diameter 4'217.5 1.7 6'96.7 2.6 8'54.4 3.5 10'34.8 4.3 12'24.2 5.2 CANDLEPOWER DISTRIBUTION (Candelas) Degrees Vertical 0° 0 3480 5 3061 15 1280 25 462 35 192 45 77 55 32 65 17 75 10 85 4 90 0 PHOTOMETRIC REPORT Test Report#: PT07161929 Catalog No: 2LEDTRIM G2 ADJ 35K 80CRI NFL WH (1000L), Adj Gimbal with Narrow Flood Optic Luminaire Spacing Criteria: 0.42 Luminaire LPW: 95 700 1400 2100 2800 3500 0°15° 30° 45° 60° 75° 90° LUMINANCE (Average cd/m2) Degrees Average Luminance 45°124984 55°53267 65°40163 75°38475 85°48039 AVERAGE INITIAL FOOTCANDLES Multiple Units (Square Array, 60’x60’ room) Reflectances: Ceiling 80%, Wall 50%, Floor 20% Spacing RCR1 RCR3 RCR5 4'76 67 60 5'49 43 38 6'34 30 27 7'27 24 22 8'22 19 17 9'17 15 13 10'12 11 10 ZONAL LUMEN SUMMARY Zone Lumens %Lamp %Fixture 0-30°856 N/A 78.5 0-40°978 N/A 89.5 0-60°1065 N/A 97.5 0-90°1093 N/A 100.0 INITIAL FOOTCANDLES (One Unit, 11.4W, 18.2° Beam) Distance to Illuminated Plane (Feet)Footcandles Beam Center Beam Diameter 4'287.8 1.3 6'127.9 1.9 8'71.9 2.6 10'46.0 3.2 12'32.0 3.8 CANDLEPOWER DISTRIBUTION (Candelas) DegreesVertical 0° 0 4605 5 3793 15 1256 25 427 35 190 45 78 55 27 65 15 75 9 85 4 90 0 PHOTOMETRIC REPORT Test Report#: PT07161928 Catalog No: 2LEDTRIM G2 ADJ 35K 80CRI SP WH (1000L), Adj Gimbal with Spot Optic Luminaire Spacing Criteria: 0.32 Luminaire LPW: 96 1000 2000 3000 4000 5000 0°15° 30° 45° 60° 75° 90° Fixtures tested to IES recommended standard for solid state lighting per LM-79-08. Photometric performance on a single unit represents a baseline of performance for the fixture. Results may vary in the field. Multiplier: 80 CRI 90 CRI 27K = .94 27K = .83 30K = .97 30K = .86 35K = 1.00 35K = .88 40K = 1.03 40K = .90 G1.10.1G2 2” IC 600 AND 1000 LUMENS LED ROUND ADJUSTABLE 2LEDTRIM G2 ADJ 19036 5/21/2018 5 of 5 1300 S. Wolf Road • Des Plaines, IL 60018 • Phone (847) 827-9880 • Fax (847) 827-2925 • Visit us at www.acuitybrands.com/juno-recessed Printed in U.S.A. ©2015 - 2017 Acuity Brands Lighting, Inc. Rev. Rev. 05/22/17 PHOTOMETRICS CBCP • Centerbeam candlepower FC • Footcandles at beam center (aim point) In vertical aiming applications, aim point (X) is determined by dividing distance from the wall (D) by the tangent of the desired aim angle (A) (0.5774 for 30˚). MH W L L Aim Point L X W Aim Point WAim Point Aiming Angle (A = 0) Aiming Angle (A = 30) D 0 A 0 A FOR VERTICAL AIMING ANGLES FOR HORIZONTAL AIMING ANGLES MH W L L Aim Point L X W Aim Point WAim Point Aiming Angle (A = 0) Aiming Angle (A = 30) D 0 A 0 A FOR VERTICAL AIMING ANGLES FOR HORIZONTAL AIMING ANGLES Vertical Aiming AnglesHorizontal Aiming Angles Fixture Beam Spread CBCP 0°30°30° MH FC L W FC L W D FC X L W 2LEDTRIM (600L) Flood Optic 40°1141 3 127 2.2 2.2 82 3.0 2.5 1 143 1.7 4.8 1.5 4 71 2.9 2.9 46 4.1 3.4 2 36 3.5 9.7 2.9 5 46 3.6 3.6 30 5.1 4.2 3 16 5.2 14.5 4.4 6 32 4.4 4.4 21 6.1 5.0 4 9 6.9 19.3 5.8 7 23 5.1 5.1 15 7.1 5.9 5 6 8.7 24.2 7.3 2LEDTRIM (600L) Narrow Flood Optic 24°2286 3 254 1.3 1.3 165 1.7 1.5 1 286 1.7 2.0 0.9 4 143 1.7 1.7 93 2.3 2.0 2 71 3.5 3.9 1.7 5 91 2.1 2.1 59 2.9 2.5 3 32 5.2 5.9 2.6 6 64 2.6 2.6 41 3.5 2.9 4 18 6.9 7.9 3.4 7 47 3.0 3.0 30 4.0 3.4 5 11 8.7 9.8 4.3 2LEDTRIM (600L) Spot Optic 18°3445 4 215 1.3 1.3 140 1.7 1.5 2 108 3.5 2.7 1.3 5 138 1.6 1.6 90 2.1 1.8 3 48 5.2 4.1 1.9 6 96 1.9 1.9 62 2.6 2.2 4 27 6.9 5.5 2.5 7 70 2.2 2.2 46 3.0 2.6 5 17 8.7 6.9 3.2 8 54 2.5 2.5 35 3.4 2.9 6 12 10.4 8.2 3.8 For 2700K fixtures, use 0.96 multiplier; for 3000K fixtures, use 1.00 multiplier; for 3500K fixtures, use 1.03 multiplier; for 4000K fixtures, use 1.06 multiplier. Fixture Beam Spread CBCP 0°30°30° MH FC L W FC L W D FC X L W 2LEDTRIM (1000L) Flood Optic 40°1721 3 191 2.2 2.2 124 3.0 2.5 1 215 1.7 4.8 1.5 4 108 2.9 2.9 70 4.1 3.4 2 54 3.5 9.7 2.9 5 69 3.6 3.6 45 5.1 4.2 3 24 5.2 14.5 4.4 6 48 4.4 4.4 31 6.1 5.0 4 13 6.9 19.3 5.8 7 35 5.1 5.1 23 7.1 5.9 5 9 8.7 24.2 7.3 2LEDTRIM (1000L) Narrow Flood Optic 24°3480 3 387 1.3 1.3 251 1.7 1.5 1 435 1.7 2.0 0.9 4 218 1.7 1.7 141 2.3 2.0 2 109 3.5 3.9 1.7 5 139 2.1 2.1 90 2.9 2.5 3 48 5.2 5.9 2.6 6 97 2.6 2.6 63 3.5 2.9 4 27 6.9 7.9 3.4 7 71 3.0 3.0 46 4.0 3.4 5 17 8.7 9.8 4.3 2LEDTRIM (1000L) Spot Optic 18°4604 4 288 1.3 1.3 187 1.7 1.5 2 144 3.5 2.7 1.3 5 184 1.6 1.6 120 2.1 1.8 3 64 5.2 4.1 1.9 6 128 1.9 1.9 83 2.6 2.2 4 36 6.9 5.5 2.5 7 94 2.2 2.2 61 3.0 2.6 5 23 8.7 6.9 3.2 8 72 2.5 2.5 47 3.4 2.9 6 16 10.4 8.2 3.8 For 2700K fixtures, use 0.96 multiplier; for 3000K fixtures, use 1.00 multiplier; for 3500K fixtures, use 1.03 multiplier; for 4000K fixtures, use 1.06 multiplier. G1.10.1G2 2” IC 600 AND 1000 LUMENS LED ROUND ADJUSTABLE 2LEDTRIM G2 ADJ 19036 5/21/2018 1300 S. Wolf Road • Des Plaines, IL 60018 • Phone (847) 827-9880 • Fax (847) 827-2925 • Visit us at www.acuitybrands.com/juno-trac Printed in U.S.A. ©2017-2018 Acuity Brands Lighting, Inc. Rev. 01/11/18 1 of 3 Project: Fixture Type: Location: Contact/Phone: TRAC-LITES™ 10W LED CYLINDER R605L SERIES D2.1.16 PRODUCT DESCRIPTION The R605L Series 10W LED is an economical and affordable trac fixture, with a simple and timeless aesthetic. It approximates the light output and distribution of 50W MR16 halogen lamps, utilizing about 20% of the energy and having a rated life of 50,000 hours. It is available in 2700K, 3000K, 3500K and 4000K color temperatures with a minimum 80 CRI. Optional high CRI versions are available with a minimum 90 CRI. The R605L Series LED is available in spot, narrow flood, flood and wide flood beam distributions which can be achieved with interchangeable precision-molded custom TIR optics. It is available with an optional, bayonet-mount accessory holder that accommodates one accessory if desired. It is compatible with Juno Trac-Lites™ and Trac-Master™ trac and system components. PRODUCT SPECIFICATIONS Construction Die cast aluminum heat sink provides outstanding thermal management of LED, yielding 70% average lumen maintenance at 50,000 hours of operation • Simple, timeless design complements any decor • Available in white, black, bronze and silver finishes. LED High performance LED array provides outstanding reliability, performance and color quality/consistency • 2700K, 3000K, 3500K or 4000K white phosphor high performance LEDs • Chromaticity range within a 3-step MacAdam Ellipse • Exceptional 80 CRI minimum on a standard product • Optional high CRI versions offer 90 CRI minimum. Driver Integrated into fixture housing behind LED light engine to minimize overall fixture footprint • Insulating air gap between driver and LED light engine, plus thermal potting compound, optimizes thermal operation • Provides quiet operation with or without dimming • Dimmable using high quality, factory-approved dimmers - see R605L-DIM • Solid state electronic, Class 2 compliant • Integral overcurrent and short circuit protec-tion • Designed for greater than 50,000 hour operating life • FCC Certified to Part 15 Class B EMI standards. Optics Proprietary, interchangeable computer-designed custom TIR optics available in four factory-configured beam spreads • One TIR optic provided with fixture (as specified in catalog number) • Simply snaps into baffled bayonet mount optic holder • Accessory optics available to enable simple beam changes in the field • Beam patterns can be altered as desired using a variety of available light control accessories. Accessory Holder Optional accessory ring attaches to baffled optic holder without tools • May be specified as a factory-installed option or ordered separately as a field-installed accessory • Precision bayonet mounting • Accommodates one accessory if desired. Adapter Copper alloy contacts provide precise spring action - no arcing and will not take a set • True, positive electrical ground • On/off switch included • Patented embossed polarity arrows on bottom of adapter • Spring-loaded positive latch with embossed polarity arrows secures trac fixture to trac • Two-Position power contact provided for two circuit applications. Aiming 350° horizontal coverage • 90° vertical aiming capability. Labels UL and C-UL Listed • ENERGY STAR® certified • Assembled in U.S.A • 90 CRI version certified as CEC Title 24 Compliant • DLC Qualified. Warranty 5-year limited warranty. Complete warranty terms located at: www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx. Specifications subject to change without notice. ORDERING INFORMATION Ordering Example: R605L 27K 80CRI PDIM FL BL Notes:1 DCCF 200 HAL2700 corrects 3000K color to approximately 2700K and 4000K color to approximately 3400K. Series Color Temperature Color Rendering Index Dimming Compatibility Distribution Finish Accessory Holder Option R605L Trac-Lites™ 10W LED Cylinder 27K 2700K 30K 3000K 35K 3500K 40K 4000K 80CRI 80 CRI 90CRI 90 CRI PDIM Phase Dimmable FL Flood NFL Narrow Flood SP Spot WFL Wide Flood BL Black BZ Bronze SL Silver WH White AHR605 BLCK Accessory Holder for R605L, Black AHR605 WHT Accessory Holder for R605L, White Accessories AHR605 BLCK 200 Accessory Holder for R605L, Black AHR605 WHT 200 Accessory Holder for R605L, White UVF 200 UV Filter CGF 200 Color Glass Filter DCCF 2001 Dichroic Color Correction Filter DGF 200 Dichroic Glass Filter DIFF 200 Diffusion Glass Lens PRISM 200 Prismatic Spread Glass Lens SOLITE 200 Uniformity Lens (Solite) HCLBL 200 Hexagonal Cell Louver - Black SNOOTBL 200 Snoot - Black TIR6 FLD BLCK TIR Optic - Flood, Black TIR6 FLD WHT TIR Optic - Flood, White TIR6 NFLD BLCK TIR Optic - Narrow Flood, Black TIR6 NFLD WHT TIR Optic - Narrow Flood, White TIR6 SPT BLCK TIR Optic - Spot, Black TIR6 SPT WHT TIR Optic - Spot, White TIR6 WFLD BLCK TIR Optic - Wide Flood, Black TIR6 WFLD WHT TIR Optic - Wide Flood, White See specification sheet D1.2.2 for details. 19082 5/21/2018 1300 S. Wolf Road • Des Plaines, IL 60018 • Phone (847) 827-9880 • Fax (847) 827-2925 • Visit us at www.acuitybrands.com/juno-trac Printed in U.S.A. ©2017-2018 Acuity Brands Lighting, Inc. Rev. 01/11/18 2 of 3 TRAC-LITES™ 10W LED CYLINDER R605L SERIES D2.1.16 Input Voltage 120V Input Current (max.)0.09A Power Factor >0.95 T.H.D.<20% ELECTRICAL DATA Catalog Number Input Voltage Watts (Typical) Lumens Efficacy (LPW)Rated Life (Hours) R605L 27K 80CRI PDIM SP 120V 10.5 924 88 50,000 R605L 27K 80CRI PDIM NFL 120V 10.5 893 85 50,000 R605L 27K 80CRI PDIM FL 120V 10.5 957 91 50,000 R605L 27K 80CRI PDIM WFL 120V 10.5 851 81 50,000 R605L 27K 90CRI PDIM SP 120V 10.5 764 73 50,000 R605L 27K 90CRI PDIM NFL 120V 10.5 738 70 50,000 R605L 27K 90CRI PDIM FL 120V 10.5 792 75 50,000 R605L 27K 90CRI PDIM WFL 120V 10.5 704 67 50,000 R605L 30K 80CRI PDIM SP 120V 10.5 972 93 50,000 R605L 30K 80CRI PDIM NFL 120V 10.5 939 89 50,000 R605L 30K 80CRI PDIM FL 120V 10.5 1007 96 50,000 R605L 30K 80CRI PDIM WFL 120V 10.5 895 85 50,000 R605L 30K 90CRI PDIM SP 120V 10.5 803 76 50,000 R605L 30K 90CRI PDIM NFL 120V 10.5 776 74 50,000 R605L 30K 90CRI PDIM FL 120V 10.5 832 79 50,000 R605L 30K 90CRI PDIM WFL 120V 10.5 739 70 50,000 R605L 35K 80CRI PDIM SP 120V 10.5 998 95 50,000 R605L 35K 80CRI PDIM NFL 120V 10.5 964 92 50,000 R605L 35K 80CRI PDIM FL 120V 10.5 1034 98 50,000 R605L 35K 80CRI PDIM WFL 120V 10.5 919 88 50,000 R605L 35K 90CRI PDIM SP 120V 10.5 824 78 50,000 R605L 35K 90CRI PDIM NFL 120V 10.5 796 76 50,000 R605L 35K 90CRI PDIM FL 120V 10.5 854 81 50,000 R605L 35K 90CRI PDIM WFL 120V 10.5 759 72 50,000 R605L 40K 80CRI PDIM SP 120V 10.5 1015 97 50,000 R605L 40K 80CRI PDIM NFL 120V 10.5 981 93 50,000 R605L 40K 80CRI PDIM FL 120V 10.5 1052 100 50,000 R605L 40K 80CRI PDIM WFL 120V 10.5 935 89 50,000 R605L 40K 90CRI PDIM SP 120V 10.5 838 80 50,000 R605L 40K 90CRI PDIM NFL 120V 10.5 810 77 50,000 R605L 40K 90CRI PDIM FL 120V 10.5 868 83 50,000 R605L 40K 90CRI PDIM WFL 120V 10.5 772 74 50,000 PERFORMANCE DATA1 1 Performance data, including Rated Life, is based on measurements of an individual fixture operating in a 25˚C ambient. DIMENSIONS 6 5/8" 2 1/2" 4 7/16" 2 15/16" 19082 5/21/2018 1300 S. Wolf Road • Des Plaines, IL 60018 • Phone (847) 827-9880 • Fax (847) 827-2925 • Visit us at www.acuitybrands.com/juno-trac Printed in U.S.A. ©2017-2018 Acuity Brands Lighting, Inc. Rev. 01/11/18 3 of 3 TRAC-LITES™ 10W LED CYLINDER R605L SERIES D2.1.16 For 27K 80CRI fixtures, use 0.95 multiplier; for 27K 90CRI fixtures, use 0.79 multiplier; for 30K 90CRI fixtures, use 0.83 multiplier; for 35K 80CRI fixtures, use 1.03 multiplier; for 35K 90CRI fixtures, use 0.85 multiplier; for 40K 80CRI fixtures, use 1.04 multiplier; for 40K 90CRI fixtures, use 0.86 multiplier. Fixture Beam Type Beam Spread Rated Life CBCP 0°30°30°45°60° MH FC L W FC L W D FC X L W FC X L W D FC X L W SP R605L 10W LED, 3000K, 80CRI Spot 13 °50000 9850 6 274 1.4 1.4 178 1.8 1.6 3 137 5.2 2.8 1.4 387 3.0 1.4 1.0 6 178 3.5 1.8 1.6 8 154 1.8 1.8 100 2.4 2.1 4 77 6.9 3.8 1.8 218 4.0 1.8 1.3 8 100 4.6 2.4 2.1 10 99 2.3 2.3 64 3.0 2.6 5 49 8.7 4.7 2.3 139 5.0 2.3 1.6 10 64 5.8 3.0 2.6 12 68 2.7 2.7 44 3.6 3.1 6 34 10.4 5.6 2.7 97 6.0 2.7 1.9 12 44 6.9 3.6 3.1 14 50 3.2 3.2 33 4.2 3.7 7 25 12.1 6.6 3.2 71 70 3.2 2.2 14 33 8.1 4.2 3.7 NFL R605L 10W LED, 3000K, 80CRI Narrow Flood 21°50000 4189 4 262 1.5 1.5 170 2.0 1.7 2 131 3.5 3.4 1.5 370 2.0 1.6 1.1 4 170 2.3 2.0 1.7 6 116 2.3 2.3 76 3.1 2.6 3 58 5.2 5.1 2.3 165 3.0 2.4 1.6 6 76 3.5 3.1 2.6 8 65 3.0 3.0 43 4.1 3.5 4 33 6.9 6.8 3.0 93 4.0 3.1 2.1 8 43 4.6 4.1 3.5 10 42 3.8 3.8 27 5.1 4.4 5 21 8.7 8.5 3.8 59 5.0 3.9 2.7 10 27 5.8 5.1 4.4 12 29 4.5 4.5 19 6.1 5.2 6 15 10.4 10.2 4.5 41 6.0 4.7 3.2 12 19 6.9 6.1 5.2 FL R605L 10W LED, 3000K, 80CRI Flood 31°50000 2387 4 149 2.2 2.2 97 3.0 2.5 1 298 1.7 2.8 1.1 844 1.0 1.2 0.8 3 172 1.7 2.3 1.9 5 95 2.7 2.7 62 3.8 3.2 2 75 3.5 5.7 2.2 211 2.0 2.4 1.6 4 97 2.3 3.0 2.5 6 66 3.3 3.3 43 4.5 3.8 3 33 5.2 8.5 3.3 94 3.0 3.6 2.3 5 62 2.9 3.8 3.2 7 49 3.8 3.8 32 5.3 4.4 4 19 6.9 11.4 4.4 53 4.0 4.8 3.1 6 43 3.5 4.5 3.8 8 37 4.4 4.4 24 6.0 5.1 5 12 8.7 14.2 5.5 34 5.0 5.9 3.9 7 32 4.0 5.3 4.4 WFL R605L 10W LED, 3000K, 80CRI Wide Flood 35°50000 144 5 2 361 1.3 1.3 235 1.8 1.5 1.0 181 1.7 3.6 1.3 511 1.0 1.4 0.9 2 235 1.2 1.8 1.5 3 161 1.9 1.9 104 2.6 2.2 1.5 80 2.6 5.5 1.9 227 1.5 2.1 1.3 3 104 1.7 2.6 2.2 4 90 2.5 2.5 59 3.5 2.9 2.0 45 3.5 7.3 2.5 128 2.0 2.8 1.8 4 59 2.3 3.5 2.9 5 58 3.2 3.2 38 4.4 3.7 2.5 29 4.3 9.1 3.2 82 2.5 3.5 2.2 5 38 2.9 4.4 3.7 6 40 3.8 3.8 26 5.3 4.4 3.0 20 5.2 10.9 3.8 57 3.0 4.2 2.7 6 26 3.5 5.3 4.4 MH W L L Aim Point L X W Aim Point WAim Point Aiming Angle (A = 0) Aiming Angle (A = 30) D 0 A 0 A FOR VERTICAL AIMING ANGLES FOR HORIZONTAL AIMING ANGLES MH W L L Aim Point L X W Aim Point WAim Point Aiming Angle (A = 0) Aiming Angle (A = 30) D 0 A 0 A FOR VERTICAL AIMING ANGLES FOR HORIZONTAL AIMING ANGLES Vertical Aiming AnglesHorizontal Aiming Angles CBCP • Centerbeam candlepower FC • Footcandles at beam center (aim point) In vertical aiming applications, aim point (X) is determined by dividing distance from the wall (D) by the tangent of the desired aim angle (A) (0.5774 for 30˚, 1.0 for 45˚, 1.732 for 60˚). 19082 5/21/2018 1300 S. Wolf Road • Des Plaines, IL 60018 • Phone (847) 827-9880 • Fax (847) 827-2925 • Visit us at www.acuitybrands.com/juno-trac Printed in U.S.A. ©2017-2018 Acuity Brands Lighting, Inc. Rev. 01/11/18 1 of 3 Project: Fixture Type: Location: Contact/Phone: TRAC-LITES™ 10W LED CYLINDER R605L SERIES D2.1.16 PRODUCT DESCRIPTION The R605L Series 10W LED is an economical and affordable trac fixture, with a simple and timeless aesthetic. It approximates the light output and distribution of 50W MR16 halogen lamps, utilizing about 20% of the energy and having a rated life of 50,000 hours. It is available in 2700K, 3000K, 3500K and 4000K color temperatures with a minimum 80 CRI. Optional high CRI versions are available with a minimum 90 CRI. The R605L Series LED is available in spot, narrow flood, flood and wide flood beam distributions which can be achieved with interchangeable precision-molded custom TIR optics. It is available with an optional, bayonet-mount accessory holder that accommodates one accessory if desired. It is compatible with Juno Trac-Lites™ and Trac-Master™ trac and system components. PRODUCT SPECIFICATIONS Construction Die cast aluminum heat sink provides outstanding thermal management of LED, yielding 70% average lumen maintenance at 50,000 hours of operation • Simple, timeless design complements any decor • Available in white, black, bronze and silver finishes. LED High performance LED array provides outstanding reliability, performance and color quality/consistency • 2700K, 3000K, 3500K or 4000K white phosphor high performance LEDs • Chromaticity range within a 3-step MacAdam Ellipse • Exceptional 80 CRI minimum on a standard product • Optional high CRI versions offer 90 CRI minimum. Driver Integrated into fixture housing behind LED light engine to minimize overall fixture footprint • Insulating air gap between driver and LED light engine, plus thermal potting compound, optimizes thermal operation • Provides quiet operation with or without dimming • Dimmable using high quality, factory-approved dimmers - see R605L-DIM • Solid state electronic, Class 2 compliant • Integral overcurrent and short circuit protec-tion • Designed for greater than 50,000 hour operating life • FCC Certified to Part 15 Class B EMI standards. Optics Proprietary, interchangeable computer-designed custom TIR optics available in four factory-configured beam spreads • One TIR optic provided with fixture (as specified in catalog number) • Simply snaps into baffled bayonet mount optic holder • Accessory optics available to enable simple beam changes in the field • Beam patterns can be altered as desired using a variety of available light control accessories. Accessory Holder Optional accessory ring attaches to baffled optic holder without tools • May be specified as a factory-installed option or ordered separately as a field-installed accessory • Precision bayonet mounting • Accommodates one accessory if desired. Adapter Copper alloy contacts provide precise spring action - no arcing and will not take a set • True, positive electrical ground • On/off switch included • Patented embossed polarity arrows on bottom of adapter • Spring-loaded positive latch with embossed polarity arrows secures trac fixture to trac • Two-Position power contact provided for two circuit applications. Aiming 350° horizontal coverage • 90° vertical aiming capability. Labels UL and C-UL Listed • ENERGY STAR® certified • Assembled in U.S.A • 90 CRI version certified as CEC Title 24 Compliant • DLC Qualified. Warranty 5-year limited warranty. Complete warranty terms located at: www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx. Specifications subject to change without notice. ORDERING INFORMATION Ordering Example: R605L 27K 80CRI PDIM FL BL Notes:1 DCCF 200 HAL2700 corrects 3000K color to approximately 2700K and 4000K color to approximately 3400K. Series Color Temperature Color Rendering Index Dimming Compatibility Distribution Finish Accessory Holder Option R605L Trac-Lites™ 10W LED Cylinder 27K 2700K 30K 3000K 35K 3500K 40K 4000K 80CRI 80 CRI 90CRI 90 CRI PDIM Phase Dimmable FL Flood NFL Narrow Flood SP Spot WFL Wide Flood BL Black BZ Bronze SL Silver WH White AHR605 BLCK Accessory Holder for R605L, Black AHR605 WHT Accessory Holder for R605L, White Accessories AHR605 BLCK 200 Accessory Holder for R605L, Black AHR605 WHT 200 Accessory Holder for R605L, White UVF 200 UV Filter CGF 200 Color Glass Filter DCCF 2001 Dichroic Color Correction Filter DGF 200 Dichroic Glass Filter DIFF 200 Diffusion Glass Lens PRISM 200 Prismatic Spread Glass Lens SOLITE 200 Uniformity Lens (Solite) HCLBL 200 Hexagonal Cell Louver - Black SNOOTBL 200 Snoot - Black TIR6 FLD BLCK TIR Optic - Flood, Black TIR6 FLD WHT TIR Optic - Flood, White TIR6 NFLD BLCK TIR Optic - Narrow Flood, Black TIR6 NFLD WHT TIR Optic - Narrow Flood, White TIR6 SPT BLCK TIR Optic - Spot, Black TIR6 SPT WHT TIR Optic - Spot, White TIR6 WFLD BLCK TIR Optic - Wide Flood, Black TIR6 WFLD WHT TIR Optic - Wide Flood, White See specification sheet D1.2.2 for details. 19085 5/21/2018 1300 S. Wolf Road • Des Plaines, IL 60018 • Phone (847) 827-9880 • Fax (847) 827-2925 • Visit us at www.acuitybrands.com/juno-trac Printed in U.S.A. ©2017-2018 Acuity Brands Lighting, Inc. Rev. 01/11/18 2 of 3 TRAC-LITES™ 10W LED CYLINDER R605L SERIES D2.1.16 Input Voltage 120V Input Current (max.)0.09A Power Factor >0.95 T.H.D.<20% ELECTRICAL DATA Catalog Number Input Voltage Watts (Typical) Lumens Efficacy (LPW)Rated Life (Hours) R605L 27K 80CRI PDIM SP 120V 10.5 924 88 50,000 R605L 27K 80CRI PDIM NFL 120V 10.5 893 85 50,000 R605L 27K 80CRI PDIM FL 120V 10.5 957 91 50,000 R605L 27K 80CRI PDIM WFL 120V 10.5 851 81 50,000 R605L 27K 90CRI PDIM SP 120V 10.5 764 73 50,000 R605L 27K 90CRI PDIM NFL 120V 10.5 738 70 50,000 R605L 27K 90CRI PDIM FL 120V 10.5 792 75 50,000 R605L 27K 90CRI PDIM WFL 120V 10.5 704 67 50,000 R605L 30K 80CRI PDIM SP 120V 10.5 972 93 50,000 R605L 30K 80CRI PDIM NFL 120V 10.5 939 89 50,000 R605L 30K 80CRI PDIM FL 120V 10.5 1007 96 50,000 R605L 30K 80CRI PDIM WFL 120V 10.5 895 85 50,000 R605L 30K 90CRI PDIM SP 120V 10.5 803 76 50,000 R605L 30K 90CRI PDIM NFL 120V 10.5 776 74 50,000 R605L 30K 90CRI PDIM FL 120V 10.5 832 79 50,000 R605L 30K 90CRI PDIM WFL 120V 10.5 739 70 50,000 R605L 35K 80CRI PDIM SP 120V 10.5 998 95 50,000 R605L 35K 80CRI PDIM NFL 120V 10.5 964 92 50,000 R605L 35K 80CRI PDIM FL 120V 10.5 1034 98 50,000 R605L 35K 80CRI PDIM WFL 120V 10.5 919 88 50,000 R605L 35K 90CRI PDIM SP 120V 10.5 824 78 50,000 R605L 35K 90CRI PDIM NFL 120V 10.5 796 76 50,000 R605L 35K 90CRI PDIM FL 120V 10.5 854 81 50,000 R605L 35K 90CRI PDIM WFL 120V 10.5 759 72 50,000 R605L 40K 80CRI PDIM SP 120V 10.5 1015 97 50,000 R605L 40K 80CRI PDIM NFL 120V 10.5 981 93 50,000 R605L 40K 80CRI PDIM FL 120V 10.5 1052 100 50,000 R605L 40K 80CRI PDIM WFL 120V 10.5 935 89 50,000 R605L 40K 90CRI PDIM SP 120V 10.5 838 80 50,000 R605L 40K 90CRI PDIM NFL 120V 10.5 810 77 50,000 R605L 40K 90CRI PDIM FL 120V 10.5 868 83 50,000 R605L 40K 90CRI PDIM WFL 120V 10.5 772 74 50,000 PERFORMANCE DATA1 1 Performance data, including Rated Life, is based on measurements of an individual fixture operating in a 25˚C ambient. DIMENSIONS 6 5/8" 2 1/2" 4 7/16" 2 15/16" 19085 5/21/2018 1300 S. Wolf Road • Des Plaines, IL 60018 • Phone (847) 827-9880 • Fax (847) 827-2925 • Visit us at www.acuitybrands.com/juno-trac Printed in U.S.A. ©2017-2018 Acuity Brands Lighting, Inc. Rev. 01/11/18 3 of 3 TRAC-LITES™ 10W LED CYLINDER R605L SERIES D2.1.16 For 27K 80CRI fixtures, use 0.95 multiplier; for 27K 90CRI fixtures, use 0.79 multiplier; for 30K 90CRI fixtures, use 0.83 multiplier; for 35K 80CRI fixtures, use 1.03 multiplier; for 35K 90CRI fixtures, use 0.85 multiplier; for 40K 80CRI fixtures, use 1.04 multiplier; for 40K 90CRI fixtures, use 0.86 multiplier. Fixture Beam Type Beam Spread Rated Life CBCP 0°30°30°45°60° MH FC L W FC L W D FC X L W FC X L W D FC X L W SP R605L 10W LED, 3000K, 80CRI Spot 13 °50000 9850 6 274 1.4 1.4 178 1.8 1.6 3 137 5.2 2.8 1.4 387 3.0 1.4 1.0 6 178 3.5 1.8 1.6 8 154 1.8 1.8 100 2.4 2.1 4 77 6.9 3.8 1.8 218 4.0 1.8 1.3 8 100 4.6 2.4 2.1 10 99 2.3 2.3 64 3.0 2.6 5 49 8.7 4.7 2.3 139 5.0 2.3 1.6 10 64 5.8 3.0 2.6 12 68 2.7 2.7 44 3.6 3.1 6 34 10.4 5.6 2.7 97 6.0 2.7 1.9 12 44 6.9 3.6 3.1 14 50 3.2 3.2 33 4.2 3.7 7 25 12.1 6.6 3.2 71 70 3.2 2.2 14 33 8.1 4.2 3.7 NFL R605L 10W LED, 3000K, 80CRI Narrow Flood 21°50000 4189 4 262 1.5 1.5 170 2.0 1.7 2 131 3.5 3.4 1.5 370 2.0 1.6 1.1 4 170 2.3 2.0 1.7 6 116 2.3 2.3 76 3.1 2.6 3 58 5.2 5.1 2.3 165 3.0 2.4 1.6 6 76 3.5 3.1 2.6 8 65 3.0 3.0 43 4.1 3.5 4 33 6.9 6.8 3.0 93 4.0 3.1 2.1 8 43 4.6 4.1 3.5 10 42 3.8 3.8 27 5.1 4.4 5 21 8.7 8.5 3.8 59 5.0 3.9 2.7 10 27 5.8 5.1 4.4 12 29 4.5 4.5 19 6.1 5.2 6 15 10.4 10.2 4.5 41 6.0 4.7 3.2 12 19 6.9 6.1 5.2 FL R605L 10W LED, 3000K, 80CRI Flood 31°50000 2387 4 149 2.2 2.2 97 3.0 2.5 1 298 1.7 2.8 1.1 844 1.0 1.2 0.8 3 172 1.7 2.3 1.9 5 95 2.7 2.7 62 3.8 3.2 2 75 3.5 5.7 2.2 211 2.0 2.4 1.6 4 97 2.3 3.0 2.5 6 66 3.3 3.3 43 4.5 3.8 3 33 5.2 8.5 3.3 94 3.0 3.6 2.3 5 62 2.9 3.8 3.2 7 49 3.8 3.8 32 5.3 4.4 4 19 6.9 11.4 4.4 53 4.0 4.8 3.1 6 43 3.5 4.5 3.8 8 37 4.4 4.4 24 6.0 5.1 5 12 8.7 14.2 5.5 34 5.0 5.9 3.9 7 32 4.0 5.3 4.4 WFL R605L 10W LED, 3000K, 80CRI Wide Flood 35°50000 144 5 2 361 1.3 1.3 235 1.8 1.5 1.0 181 1.7 3.6 1.3 511 1.0 1.4 0.9 2 235 1.2 1.8 1.5 3 161 1.9 1.9 104 2.6 2.2 1.5 80 2.6 5.5 1.9 227 1.5 2.1 1.3 3 104 1.7 2.6 2.2 4 90 2.5 2.5 59 3.5 2.9 2.0 45 3.5 7.3 2.5 128 2.0 2.8 1.8 4 59 2.3 3.5 2.9 5 58 3.2 3.2 38 4.4 3.7 2.5 29 4.3 9.1 3.2 82 2.5 3.5 2.2 5 38 2.9 4.4 3.7 6 40 3.8 3.8 26 5.3 4.4 3.0 20 5.2 10.9 3.8 57 3.0 4.2 2.7 6 26 3.5 5.3 4.4 MH W L L Aim Point L X W Aim Point WAim Point Aiming Angle (A = 0) Aiming Angle (A = 30) D 0 A 0 A FOR VERTICAL AIMING ANGLES FOR HORIZONTAL AIMING ANGLES MH W L L Aim Point L X W Aim Point WAim Point Aiming Angle (A = 0) Aiming Angle (A = 30) D 0 A 0 A FOR VERTICAL AIMING ANGLES FOR HORIZONTAL AIMING ANGLES Vertical Aiming AnglesHorizontal Aiming Angles CBCP • Centerbeam candlepower FC • Footcandles at beam center (aim point) In vertical aiming applications, aim point (X) is determined by dividing distance from the wall (D) by the tangent of the desired aim angle (A) (0.5774 for 30˚, 1.0 for 45˚, 1.732 for 60˚). 19085 5/21/2018 Project: Fixture Type: Location: Contact/Phone: 1 of 5 1300 S. Wolf Road • Des Plaines, IL 60018 • Phone (847) 827-9880 • Fax (847) 827-2925 • Visit us at www.acuitybrands.com/juno-recessed Printed in U.S.A. ©2015 - 2017 Acuity Brands Lighting, Inc. Rev. Rev. 05/22/17 G1.10.1G2 2” IC 600 AND 1000 LUMENS LED ROUND ADJUSTABLE 2LEDTRIM G2 ADJ PRODUCT DESCRIPTION 2 inch aperture recessed downlight is IC rated for insulated or non-in- sulated applications • Luminaire produces up to 1000 lumens and is available with optical distributions approximating that of 75W MR16 halogen lamps • Low profile form factor allows luminaire to fit in 2 x 6 construction • Designed to provide 50,000 hours of life • 5 year limited warranty on LED Components. ENVIRONMENTALLY FRIENDLY, ENERGY EFFICIENT • No harmful ultraviolet or infrared wavelengths • No lead or mercury, RoHS compliant • Comparable light output up to a 75W MR16 halogen lamp PRODUCT SPECIFICATIONS LED Light Engine Exceptional fixture to fixture color consistency within a 3-step MacAdam ellipse • 2700K, 3000K, 3500K, and 4000K color temperatures are available with 80 CRI or 90 CRI minimum. Modular Optics Available with field interchangeable optics in 18° Spot, 24° Narrow Flood, or 40° Flood distributions. Aesthetic Trim Trim features die cast beveled knife edge trim ring for clean ceiling interface available in white, black, satin nickel, or brushed bronze • Die cast baffles are available in white, black, satin nickel, or brushed bronze LED Driver Choice of dedicated 120 volt (120) driver or universal voltage (MVOLT) driver that accommodates input voltages from 120-277 volts AC at 50/60Hz • Power factor > 0.9 • Dedicated 120 volt driver (120) is dimmable with the use of most incandescent, magnetic low voltage and electronic low voltage dimmers • Universal voltage driver (MVOLT) is dimmable with the use of most 0-10V protocol dimmers • For a list of compatible dimmers, see JUNO2ING2-DIM. Life Rated for 50,000 hours at 70% lumen maintenance. Labels ENERGY STAR® Certified • 90CRI fixtures are certified to the high efficacy requirements of California T24 JA8-2016 • Meets energy code Air Leakage requirements per ASTM E283 • UL and cUL listed for wet locations. Junction Box Includes (2) ½” knock-outs equipped with pryout slots • Push-in electrical connectors for field connections. Mounting Remodel style plaster frame installs from below the ceiling and accommodates ceiling thicknesses from ½” to 1” •For thicker ceilings up to 1 ½”, order 2JCTA150 •New Construction mounting frame, 2NCMF, is also available with Patented (US Patent D552,969) Real Nail 3® telescoping bar hangers to position fixture and locate wiring prior to ceiling installation • Recommend a minimum of 5.5” cavity depth to install properly • Flexible supply is recommended and non-flexible supply requires top access. Specifications subject to change without notice. Dedicated 120V (120)Universal Voltage (MVOLT) Voltage 120 120 277 Input Power 7.5 (±5%) 7.2 7.5 (±5%) Input Current .06 .06 .03 Frequency 50/60Hz 50/60Hz Power Factor >0.9 >0.9 >0.9 ENGINEERING DATA (600L) Dedicated 120V (120)Universal Voltage (MVOLT) Voltage 120 120 277 Input Power 11.5 (±5%) 10.9 11.4 (±5%) Input Current .10 .09 .04 Frequency 50/60Hz 50/60Hz Power Factor >0.9 >0.9 >0.9 ENGINEERING DATA (1000L) 2 5/8” CEILING CUTOUT DIMENSIONS 11 9/16” 4 1/8” 3 1/8” Trim Finishes BZSNBLWH 7” 19117 5/21/2018 2 of 5 1300 S. Wolf Road • Des Plaines, IL 60018 • Phone (847) 827-9880 • Fax (847) 827-2925 • Visit us at www.acuitybrands.com/juno-recessed Printed in U.S.A. ©2015 - 2017 Acuity Brands Lighting, Inc. Rev. Rev. 05/22/17 Example: 2LEDDRIVER G2 06LM 120 FRPC Series Generation Lumens Voltage Driver 2LEDDRIVER Juno Recessed 2” Driver G2 Generation 2 06LM 600 Nominal Lumens 120 120V FRPC Forward/Reverse Phase Cut 10LM 1000 Nominal Lumens MVOLT Multi-Volt (120- 277V) ZT 0-10V Dimming Note: 120V must be ordered with FRPC. MVOLT must be ordered with ZT Example: 2LEDTRIM G2 ADJ 27K 80CRI FL BL Series Generation Trim Designation Color Temperature CRI Distribution Trim Finish 2LEDTRIM Juno Recessed 2” LED Trim G2 Generation 2 ADJ Round Adjustable 27K 2700K 80CRI 80+ CRI FL Flood BL Black 30K 3000K 90CRI 90+ CRI NFL Narrow Flood BZ Bronze 35K 3500K SP Spot SN Satin Nickel 40K 4000K WH White ORDERING INFORMATION DRIVER AND TRIM EACH ORDERED SEPARATELY. DRIVER: TRIM: ACCESSORIES Catalog No.Description 2NCMF New Construction Mounting Frame with Real Nail® 3 bar hangers 2JCTA150 Thick Ceiling adapter for 1” - 1½” thick ceiling LEDOPTIC2 SP 18° Spot Optic LEDOPTIC2 NFL 24° Narrow Flood Optic LEDOPTIC2 FL 40° Flood Optic TRIM/LED ASSEMBLY MOUNTING FRAME/DRIVER ASSEMBLY Note: Driver assembly only intended for use with Gen2 LED trim modules. Not backward compatible with previous generation. 12 5/8” 15 15/16” 10 13/64” 13 1/2” will expand to 25” (Reduces to 9 1/8” with breakaway feature) 2NCMF 2JCTA150 G1.10.1G2 2” IC 600 AND 1000 LUMENS LED ROUND ADJUSTABLE 2LEDTRIM G2 ADJ 19117 5/21/2018 3 of 5 1300 S. Wolf Road • Des Plaines, IL 60018 • Phone (847) 827-9880 • Fax (847) 827-2925 • Visit us at www.acuitybrands.com/juno-recessed Printed in U.S.A. ©2015 - 2017 Acuity Brands Lighting, Inc. Rev. Rev. 05/22/17 LUMINANCE (Average cd/m2) Degrees Average Luminance 45°81296 55°41627 65°29721 75°27982 85°27265 AVERAGE INITIAL FOOTCANDLES Multiple Units (Square Array, 60’x60’ room) Reflectances: Ceiling 80%, Wall 50%, Floor 20% Spacing RCR1 RCR3 RCR5 4'50 44 39 5'32 28 25 6'22 19 17 7'18 16 14 8'14 12 11 9'11 10 8 10'8 7 6 ZONAL LUMEN SUMMARY Zone Lumens %Lamp %Fixture 0-30°552 N/A 77.4 0-40°633 N/A 88.8 0-60°694 N/A 97.2 0-90°714 N/A 100.0 INITIAL FOOTCANDLES (One Unit, 7.5W, 24.4° Beam) Distance to Illuminated Plane (Feet)Footcandles Beam Center Beam Diameter 4'142.9 1.7 6'63.5 2.6 8'35.7 3.5 10'22.9 4.3 12'15.9 5.2 CANDLEPOWER DISTRIBUTION (Candelas) Degrees Vertical 0° 0 2286 5 2009 15 840 25 304 35 127 45 51 55 21 65 11 75 6 85 2 90 0 PHOTOMETRIC REPORT Test Report#: PT07161926 Catalog No: 2LEDTRIM G2 ADJ 35K 80CRI NFL WH (600L), Adj Gimbal with Narrow Flood Optic Luminaire Spacing Criteria: 0.42 Luminaire LPW: 95 500 1000 1500 2000 2500 0°15° 30° 45° 60° 75° 90° 0°15° 30° 45° LUMINANCE (Average cd/m2) Degrees Average Luminance 45°81936 55°34328 65°26240 75°24484 85°27265 PHOTOMETRIC REPORT Test Report#: PT07161925 Catalog No: 2LEDTRIM G2 ADJ 35K 80CRI SP WH (600L), Adj Gimbal with Spot Optic Luminaire Spacing Criteria: 0.32 Luminaire LPW: 95 AVERAGE INITIAL FOOTCANDLES Multiple Units (Square Array, 60’x60’ room) Reflectances: Ceiling 80%, Wall 50%, Floor 20% Spacing RCR1 RCR3 RCR5 4'49 44 39 5'32 28 25 6'22 19 17 7'18 16 14 8'14 12 11 9'11 10 9 10'8 7 6 ZONAL LUMEN SUMMARY Zone Lumens %Lamp %Fixture 0-30°560 N/A 78.5 0-40°638 N/A 89.5 0-60°695 N/A 97.5 0-90°713 N/A 100.0 INITIAL FOOTCANDLES (One Unit, 7.5W, 17.7° Beam) Distance to Illuminated Plane (Feet)Footcandles Beam Center Beam Diameter 4'193.1 1.2 6'85.8 1.9 8'48.3 2.5 10'30.9 3.1 12'21.5 3.7 CANDLEPOWER DISTRIBUTION (Candelas) DegreesVertical 0° 0 3090 5 2523 15 816 25 275 35 127 45 51 55 17 65 10 75 6 85 2 90 0 600 1200 1800 2400 3000 60° 75° 90° AVERAGE INITIAL FOOTCANDLES Multiple Units (Square Array, 60’x60’ room) Reflectances: Ceiling 80%, Wall 50%, Floor 20% Spacing RCR1 RCR3 RCR5 4'50 43 38 5'32 27 24 6'22 19 17 7'18 15 14 8'14 12 11 9'11 9 8 10'8 7 6 ZONAL LUMEN SUMMARY Zone Lumens %Lamp %Fixture 0-30°531 N/A 74.3 0-40°639 N/A 89.5 0-60°702 N/A 98.4 0-90°714 N/A 100.0 LUMINANCE (Average cd/m2) Degrees Average Luminance 45°88657 55°39852 65°19814 75°13116 85°1298 INITIAL FOOTCANDLES (One Unit, 7.5W, 43.1° Beam) Distance to Illuminated Plane (Feet)Footcandles Beam Center Beam Diameter 4'71.3 3.2 6'31.7 4.7 8'17.8 6.3 10'11.4 7.9 12'7.9 9.5 CANDLEPOWER DISTRIBUTION (Candelas) DegreesVertical 0° 0 1141 5 1105 15 823 25 439 35 168 45 55 55 20 65 7 75 3 85 0 90 0 PHOTOMETRIC REPORT Test Report#: PT07161927 Catalog No: 2LEDTRIM G2 ADJ 35K 80CRI FL WH (600L), Adj Gimbal with Flood Optic Luminaire Spacing Criteria: 0.70 Luminaire LPW: 95 225 450 675 900 1125 0°15° 30° 45° 60° 75° 90° Fixtures tested to IES recommended standard for solid state lighting per LM-79-08. Photometric performance on a single unit represents a baseline of performance for the fixture. Results may vary in the field. Multiplier: 80 CRI 90 CRI 27K = .94 27K = .83 30K = .97 30K = .86 35K = 1.00 35K = .88 40K = 1.03 40K = .90 G1.10.1G2 2” IC 600 AND 1000 LUMENS LED ROUND ADJUSTABLE 2LEDTRIM G2 ADJ PHOTOMETRICS 19117 5/21/2018 4 of 5 1300 S. Wolf Road • Des Plaines, IL 60018 • Phone (847) 827-9880 • Fax (847) 827-2925 • Visit us at www.acuitybrands.com/juno-recessed Printed in U.S.A. ©2015 - 2017 Acuity Brands Lighting, Inc. Rev. Rev. 05/22/17 PHOTOMETRICS AVERAGE INITIAL FOOTCANDLES Multiple Units (Square Array, 60’x60’ room) Reflectances: Ceiling 80%, Wall 50%, Floor 20% Spacing RCR1 RCR3 RCR5 4'75 65 57 5'48 41 37 6'33 29 25 7'27 23 21 8'21 18 16 9'16 14 12 10'12 10 9 ZONAL LUMEN SUMMARY Zone Lumens %Lamp %Fixture 0-30°800 N/A 74.2 0-40°963 N/A 89.3 0-60°1060 N/A 98.3 0-90°1078 N/A 100.0 LUMINANCE (Average cd/m2) Degrees Average Luminance 45°133786 55°60961 65°31327 75°21861 85°9088 INITIAL FOOTCANDLES (One Unit, 11.4W, 43.2° Beam) Distance to Illuminated Plane (Feet)Footcandles Beam Center Beam Diameter 4'107.6 3.2 6'47.8 4.8 8'26.9 6.3 10'17.2 7.9 12'12.0 9.5 CANDLEPOWER DISTRIBUTION (Candelas) DegreesVertical 0° 0 1721 5 1665 15 1242 25 664 35 253 45 84 55 31 65 12 75 5 85 1 90 0 PHOTOMETRIC REPORT Test Report#: PT07161930 Catalog No: 2LEDTRIM G2 ADJ 35K 80CRI FL WH (1000L), Adj Gimbal with Flood Optic Luminaire Spacing Criteria: 0.70 Luminaire LPW: 95 400 800 1200 1600 2000 0°15° 30° 45° 60° 75° 90° LUMINANCE (Average cd/m2) Degrees Average Luminance 45°123544 55°63526 65°46322 75°44158 85°48039 AVERAGE INITIAL FOOTCANDLES Multiple Units (Square Array, 60’x60’ room) Reflectances: Ceiling 80%, Wall 50%, Floor 20% Spacing RCR1 RCR3 RCR5 4'75 67 59 5'48 43 38 6'34 30 26 7'27 24 21 8'21 19 17 9'16 14 13 10'12 11 9 ZONAL LUMEN SUMMARY Zone Lumens %Lamp %Fixture 0-30°842 N/A 77.4 0-40°964 N/A 88.7 0-60°1056 N/A 97.1 0-90°1087 N/A 100.0 INITIAL FOOTCANDLES (One Unit, 11.4W, 24.4° Beam) Distance to Illuminated Plane (Feet)Footcandles Beam Center Beam Diameter 4'217.5 1.7 6'96.7 2.6 8'54.4 3.5 10'34.8 4.3 12'24.2 5.2 CANDLEPOWER DISTRIBUTION (Candelas) Degrees Vertical 0° 0 3480 5 3061 15 1280 25 462 35 192 45 77 55 32 65 17 75 10 85 4 90 0 PHOTOMETRIC REPORT Test Report#: PT07161929 Catalog No: 2LEDTRIM G2 ADJ 35K 80CRI NFL WH (1000L), Adj Gimbal with Narrow Flood Optic Luminaire Spacing Criteria: 0.42 Luminaire LPW: 95 700 1400 2100 2800 3500 0°15° 30° 45° 60° 75° 90° LUMINANCE (Average cd/m2) Degrees Average Luminance 45°124984 55°53267 65°40163 75°38475 85°48039 AVERAGE INITIAL FOOTCANDLES Multiple Units (Square Array, 60’x60’ room) Reflectances: Ceiling 80%, Wall 50%, Floor 20% Spacing RCR1 RCR3 RCR5 4'76 67 60 5'49 43 38 6'34 30 27 7'27 24 22 8'22 19 17 9'17 15 13 10'12 11 10 ZONAL LUMEN SUMMARY Zone Lumens %Lamp %Fixture 0-30°856 N/A 78.5 0-40°978 N/A 89.5 0-60°1065 N/A 97.5 0-90°1093 N/A 100.0 INITIAL FOOTCANDLES (One Unit, 11.4W, 18.2° Beam) Distance to Illuminated Plane (Feet)Footcandles Beam Center Beam Diameter 4'287.8 1.3 6'127.9 1.9 8'71.9 2.6 10'46.0 3.2 12'32.0 3.8 CANDLEPOWER DISTRIBUTION (Candelas) DegreesVertical 0° 0 4605 5 3793 15 1256 25 427 35 190 45 78 55 27 65 15 75 9 85 4 90 0 PHOTOMETRIC REPORT Test Report#: PT07161928 Catalog No: 2LEDTRIM G2 ADJ 35K 80CRI SP WH (1000L), Adj Gimbal with Spot Optic Luminaire Spacing Criteria: 0.32 Luminaire LPW: 96 1000 2000 3000 4000 5000 0°15° 30° 45° 60° 75° 90° Fixtures tested to IES recommended standard for solid state lighting per LM-79-08. Photometric performance on a single unit represents a baseline of performance for the fixture. Results may vary in the field. Multiplier: 80 CRI 90 CRI 27K = .94 27K = .83 30K = .97 30K = .86 35K = 1.00 35K = .88 40K = 1.03 40K = .90 G1.10.1G2 2” IC 600 AND 1000 LUMENS LED ROUND ADJUSTABLE 2LEDTRIM G2 ADJ 19117 5/21/2018 5 of 5 1300 S. Wolf Road • Des Plaines, IL 60018 • Phone (847) 827-9880 • Fax (847) 827-2925 • Visit us at www.acuitybrands.com/juno-recessed Printed in U.S.A. ©2015 - 2017 Acuity Brands Lighting, Inc. Rev. Rev. 05/22/17 PHOTOMETRICS CBCP • Centerbeam candlepower FC • Footcandles at beam center (aim point) In vertical aiming applications, aim point (X) is determined by dividing distance from the wall (D) by the tangent of the desired aim angle (A) (0.5774 for 30˚). MH W L L Aim Point L X W Aim Point WAim Point Aiming Angle (A = 0) Aiming Angle (A = 30) D 0 A 0 A FOR VERTICAL AIMING ANGLES FOR HORIZONTAL AIMING ANGLES MH W L L Aim Point L X W Aim Point WAim Point Aiming Angle (A = 0) Aiming Angle (A = 30) D 0 A 0 A FOR VERTICAL AIMING ANGLES FOR HORIZONTAL AIMING ANGLES Vertical Aiming AnglesHorizontal Aiming Angles Fixture Beam Spread CBCP 0°30°30° MH FC L W FC L W D FC X L W 2LEDTRIM (600L) Flood Optic 40°1141 3 127 2.2 2.2 82 3.0 2.5 1 143 1.7 4.8 1.5 4 71 2.9 2.9 46 4.1 3.4 2 36 3.5 9.7 2.9 5 46 3.6 3.6 30 5.1 4.2 3 16 5.2 14.5 4.4 6 32 4.4 4.4 21 6.1 5.0 4 9 6.9 19.3 5.8 7 23 5.1 5.1 15 7.1 5.9 5 6 8.7 24.2 7.3 2LEDTRIM (600L) Narrow Flood Optic 24°2286 3 254 1.3 1.3 165 1.7 1.5 1 286 1.7 2.0 0.9 4 143 1.7 1.7 93 2.3 2.0 2 71 3.5 3.9 1.7 5 91 2.1 2.1 59 2.9 2.5 3 32 5.2 5.9 2.6 6 64 2.6 2.6 41 3.5 2.9 4 18 6.9 7.9 3.4 7 47 3.0 3.0 30 4.0 3.4 5 11 8.7 9.8 4.3 2LEDTRIM (600L) Spot Optic 18°3445 4 215 1.3 1.3 140 1.7 1.5 2 108 3.5 2.7 1.3 5 138 1.6 1.6 90 2.1 1.8 3 48 5.2 4.1 1.9 6 96 1.9 1.9 62 2.6 2.2 4 27 6.9 5.5 2.5 7 70 2.2 2.2 46 3.0 2.6 5 17 8.7 6.9 3.2 8 54 2.5 2.5 35 3.4 2.9 6 12 10.4 8.2 3.8 For 2700K fixtures, use 0.96 multiplier; for 3000K fixtures, use 1.00 multiplier; for 3500K fixtures, use 1.03 multiplier; for 4000K fixtures, use 1.06 multiplier. Fixture Beam Spread CBCP 0°30°30° MH FC L W FC L W D FC X L W 2LEDTRIM (1000L) Flood Optic 40°1721 3 191 2.2 2.2 124 3.0 2.5 1 215 1.7 4.8 1.5 4 108 2.9 2.9 70 4.1 3.4 2 54 3.5 9.7 2.9 5 69 3.6 3.6 45 5.1 4.2 3 24 5.2 14.5 4.4 6 48 4.4 4.4 31 6.1 5.0 4 13 6.9 19.3 5.8 7 35 5.1 5.1 23 7.1 5.9 5 9 8.7 24.2 7.3 2LEDTRIM (1000L) Narrow Flood Optic 24°3480 3 387 1.3 1.3 251 1.7 1.5 1 435 1.7 2.0 0.9 4 218 1.7 1.7 141 2.3 2.0 2 109 3.5 3.9 1.7 5 139 2.1 2.1 90 2.9 2.5 3 48 5.2 5.9 2.6 6 97 2.6 2.6 63 3.5 2.9 4 27 6.9 7.9 3.4 7 71 3.0 3.0 46 4.0 3.4 5 17 8.7 9.8 4.3 2LEDTRIM (1000L) Spot Optic 18°4604 4 288 1.3 1.3 187 1.7 1.5 2 144 3.5 2.7 1.3 5 184 1.6 1.6 120 2.1 1.8 3 64 5.2 4.1 1.9 6 128 1.9 1.9 83 2.6 2.2 4 36 6.9 5.5 2.5 7 94 2.2 2.2 61 3.0 2.6 5 23 8.7 6.9 3.2 8 72 2.5 2.5 47 3.4 2.9 6 16 10.4 8.2 3.8 For 2700K fixtures, use 0.96 multiplier; for 3000K fixtures, use 1.00 multiplier; for 3500K fixtures, use 1.03 multiplier; for 4000K fixtures, use 1.06 multiplier. G1.10.1G2 2” IC 600 AND 1000 LUMENS LED ROUND ADJUSTABLE 2LEDTRIM G2 ADJ 19117 5/21/2018 Project: Fixture Type: Location: Contact/Phone: 1 of 4 1300 S. Wolf Road • Des Plaines, IL 60018 • Phone (847) 827-9880 • Fax (847) 827-2925 • Visit us at www.acuitybrands.com/juno-recessed Printed in U.S.A. ©2015 - 2017 Acuity Brands Lighting, Inc. Rev. 10/23/17 G1.10.2G2 2” IC 600 AND 1000 LUMENS LED SQUARE DOWNLIGHT 2LEDTRIM G2 SQ PRODUCT DESCRIPTION 2 inch aperture recessed downlight is IC rated for insulated or non-in- sulated applications • Luminaire produces up to 1000 lumens and is available with optical distributions approximating that of 75W MR16 halogen lamps • Low profile form factor allows luminaire to fit in 2 x 6 construction • Designed to provide 50,000 hours of life • 5 year limited warranty on LED Components. ENVIRONMENTALLY FRIENDLY, ENERGY EFFICIENT • No harmful ultraviolet or infrared wavelengths • No lead or mercury, RoHS compliant • Comparable light output up to a 75W MR16 halogen lamp PRODUCT SPECIFICATIONS LED Light Engine Exceptional fixture to fixture color consistency within a 3-step MacAdam ellipse • 2700K, 3000K, 3500K, and 4000K color temperatures are available with 80 CRI or 90 CRI minimum. Modular Optics Available with field interchangeable optics in 18° Spot, 24° Narrow Flood, or 40° Flood distributions. Aesthetic Trim Trim features die cast beveled knife edge trim ring for clean ceiling interface available in white, black, satin nickel, or brushed bronze • Die cast baffles are available in white, black, satin nickel, or brushed bronze LED Driver Choice of dedicated 120 volt (120) driver or universal voltage (MVOLT) driver that accommodates input voltages from 120-277 volts AC at 50/60Hz • Power factor > 0.9 • Dedicated 120 volt driver (120) is dimmable with the use of most incandescent, magnetic low voltage and electronic low voltage dimmers • Universal voltage driver (MVOLT) is dimmable with the use of most 0-10V protocol dimmers • For a list of compatible dimmers, see JUNO2ING2-DIM. Life Rated for 50,000 hours at 70% lumen maintenance. Labels ENERGY STAR® Certified • 90CRI fixtures are certified to the high efficacy requirements of California T24 JA8-2016 • Meets energy code Air Leakage requirements per ASTM E283 • UL and cUL listed for wet locations. Junction Box Includes (2) ½” knock-outs equipped with pryout slots • Push-in electrical connectors for field connections. Mounting Remodel style plaster frame installs from below the ceiling and accommodates ceiling thicknesses from ½” to 1” •For thicker ceilings up to 1 ½”, order 2JCTA150 •New Construction mounting frame, 2NCMF, is also available with Patented (US Patent D552,969) Real Nail 3® telescoping bar hangers to position fixture and locate wiring prior to ceiling installation • Recommend a minimum of 5.5” cavity depth to install properly • Flexible supply is recommended and non-flexible supply requires top access. Specifications subject to change without notice. Dedicated 120V (120)Universal Voltage (MVOLT) Voltage 120 120 277 Input Power 7.5 (±5%) 7.2 7.5 (±5%) Input Current .06 .06 .03 Frequency 50/60Hz 50/60Hz Power Factor >0.9 >0.9 >0.9 ENGINEERING DATA (600L) Dedicated 120V (120)Universal Voltage (MVOLT) Voltage 120 120 277 Input Power 11.5 (±5%) 10.9 11.4 (±5%) Input Current .10 .09 .04 Frequency 50/60Hz 50/60Hz Power Factor >0.9 >0.9 >0.9 ENGINEERING DATA (1000L) 2 5/8” CIRCULAR CEILING CUTOUT 1 1/2” SQ APERTURE DIMENSIONS 11 9/16” 4 1/8” 3 1/8” Downlight Reflector Finishes BBZ BSN BWHBBLWWH 7” 19123 5/21/2018 2 of 4 1300 S. Wolf Road • Des Plaines, IL 60018 • Phone (847) 827-9880 • Fax (847) 827-2925 • Visit us at www.acuitybrands.com/juno-recessed Printed in U.S.A. ©2015 - 2017 Acuity Brands Lighting, Inc. Rev. 10/23/17 Example: 2LEDDRIVER G2 06LM 120 FRPC Series Generation Lumens Voltage Driver 2LEDDRIVER Juno Recessed 2” Driver G2 Generation 2 06LM 600 Nominal Lumens 120 120V FRPC Forward/Reverse Phase Cut 10LM 1000 Nominal Lumens MVOLT Multi-Volt (120-277V)ZT 0-10V Dimming Note: 120V must be ordered with FRPC. MVOLT must be ordered with ZT ORDERING INFORMATION DRIVER AND TRIM EACH ORDERED SEPARATELY. DRIVER: TRIM: ACCESSORIES Catalog No.Description 2NCMF New Construction Mounting Frame with Real Nail® 3 bar hangers 2JCTA150 Thick Ceiling adapter for 1” - 1½” thick ceiling LEDOPTIC2 SP 18° Spot Optic LEDOPTIC2 NFL 24° Narrow Flood Optic LEDOPTIC2 FL 40° Flood Optic TRIM/LED ASSEMBLY MOUNTING FRAME/DRIVER ASSEMBLY Note: Driver assembly only intended for use with Gen2 LED trim modules. Not backward compatible with previous generation. Example: 2LEDTRIM G2 SQ 27K 80CRI FL BBL Series Generation Trim Designation Color Temperature CRI Distribution Trim Finish 2LEDTRIM Juno Recessed 2” LED Trim G2 Generation 2 SQ Square Downlight 27K 2700K 80CRI 80+ CRI FL Flood BBL Black Baffle, Black Trim Ring 30K 3000K 90CRI 90+ CRI NFL Narrow Flood BBZ Black Baffle, Bronze Trim Ring 35K 3500K SP Spot BSN Black Baffle, Satin Nickel Trim 40K 4000K BWH Black Baffle, White Trim Ring WWH White Baffle, White Trim Ring 12 5/8” 15 15/16” 10 13/64” 13 1/2” will expand to 25” (Reduces to 9 1/8” with breakaway feature) 2NCMF 2JCTA150 G1.10.2G2 2” IC 600 AND 1000 LUMENS LED SQUARE DOWNLIGHT 2LEDTRIM G2 SQ 19123 5/21/2018 3 of 4 1300 S. Wolf Road • Des Plaines, IL 60018 • Phone (847) 827-9880 • Fax (847) 827-2925 • Visit us at www.acuitybrands.com/juno-recessed Printed in U.S.A. ©2015 - 2017 Acuity Brands Lighting, Inc. Rev. 10/23/17 PHOTOMETRICS AVERAGE INITIAL FOOTCANDLES Multiple Units (Square Array, 60’x60’ room) Reflectances: Ceiling 80%, Wall 50%, Floor 20% Spacing RCR1 RCR3 RCR5 4'49 42 38 5'31 27 24 6'22 19 17 7'17 15 14 8'14 12 11 9'11 9 8 10'8 7 6 ZONAL LUMEN SUMMARY Zone Lumens %Lamp %Fixture 0-30°572 N/A 81.8 0-40°639 N/A 91.4 0-60°677 N/A 96.8 0-90°700 N/A 100.0 LUMINANCE (Average cd/m2) Degrees Average Luminance 45°29572 55°18879 65°21205 75°21352 85°16280 INITIAL FOOTCANDLES (One Unit, 7.5W, 41.6° Beam) Distance to Illuminated Plane (Feet)Footcandles Beam Center Beam Diameter 4'79.3 3.0 6'35.2 4.6 8'19.8 6.1 10'12.7 7.6 12'8.8 9.1 CANDLEPOWER DISTRIBUTION (Candelas) DegreesVertical 0° 0 1268 5 1220 15 929 25 400 35 76 45 28 55 15 65 12 75 7 85 2 90 0 PHOTOMETRIC REPORT Test Report#: PT07162009 Catalog No: 2LEDTRIM G2 SQ 35K 80CRI FL WWH (600L), Downlight with Flood Optic Luminaire Spacing Criteria: 0.68 Luminaire LPW: 93 250 500 750 1000 1250 0°15° 30° 45° 60° 75° 90° LUMINANCE (Average cd/m2) Degrees Average Luminance 45°18060 55°18098 65°17847 75°17312 85°11996 AVERAGE INITIAL FOOTCANDLES Multiple Units (Square Array, 60’x60’ room) Reflectances: Ceiling 80%, Wall 50%, Floor 20% Spacing RCR1 RCR3 RCR5 4'45 40 37 5'29 26 24 6'20 18 16 7'16 15 13 8'13 11 11 9'10 9 8 10'7 6 6 ZONAL LUMEN SUMMARY Zone Lumens %Lamp %Fixture 0-30°575 N/A 88.9 0-40°600 N/A 93.1 0-60°627 N/A 97.2 0-90°645 N/A 100.0 INITIAL FOOTCANDLES (One Unit, 7.5W, 24.7° Beam) Distance to Illuminated Plane (Feet)Footcandles Beam Center Beam Diameter 4'162.5 1.8 6'72.2 2.6 8'40.6 3.5 10'26.0 4.4 12'18.1 5.3 CANDLEPOWER DISTRIBUTION (Candelas) DegreesVertical 0° 0 2601 5 2309 15 961 25 174 35 31 45 17 55 14 65 10 75 6 85 1 90 0 PHOTOMETRIC REPORT Test Report#: PT07162008 Catalog No: 2LEDTRIM G2 SQ 35K 80CRI NFL WWH (600L), Downlight with Narrow Flood Optic Luminaire Spacing Criteria: 0.42 Luminaire LPW: 86 600 1200 1800 2400 3000 0°15° 30° 45° 60° 75° 90° LUMINANCE (Average cd/m2) Degrees Average Luminance 45°17637 55°18879 65°18731 75°18466 85°13710 AVERAGE INITIAL FOOTCANDLES Multiple Units (Square Array, 60’x60’ room) Reflectances: Ceiling 80%, Wall 50%, Floor 20% Spacing RCR1 RCR3 RCR5 4'48 43 40 5'31 28 26 6'21 19 18 7'17 16 14 8'14 12 11 9'11 9 9 10'8 7 6 ZONAL LUMEN SUMMARY Zone Lumens %Lamp %Fixture 0-30°618 N/A 89.6 0-40°643 N/A 93.3 0-60°670 N/A 97.2 0-90°689 N/A 100.0 INITIAL FOOTCANDLES (One Unit, 7.5W, 19.7° Beam) Distance to Illuminated Plane (Feet)Footcandles Beam Center Beam Diameter 4'223.4 1.4 6'99.3 2.1 8'55.9 2.8 10'35.8 3.5 12'24.8 4.2 CANDLEPOWER DISTRIBUTION (Candelas) DegreesVertical 0° 0 3575 5 3068 15 929 25 134 35 33 45 17 55 15 65 11 75 6 85 2 90 0 PHOTOMETRIC REPORT Test Report#: PT07162007 Catalog No: 2LEDTRIM G2 SQ 35K 80CRI SP WWH (600L), Downlight with Spot Optic Luminaire Spacing Criteria: 0.34 Luminaire LPW: 92 700 1400 2100 2800 3500 0°15° 30° 45° 60° 75° 90° Fixtures tested to IES recommended standard for solid state lighting per LM-79-08. Photometric performance on a single unit represents a baseline of performance for the fixture. Results may vary in the field. Multiplier: 80 CRI 90 CRI 27K = .94 27K = .83 30K = .97 30K = .86 35K = 1.00 35K = .88 40K = 1.03 40K = .90 G1.10.2G2 2” IC 600 AND 1000 LUMENS LED SQUARE DOWNLIGHT 2LEDTRIM G2 SQ 19123 5/21/2018 4 of 4 1300 S. Wolf Road • Des Plaines, IL 60018 • Phone (847) 827-9880 • Fax (847) 827-2925 • Visit us at www.acuitybrands.com/juno-recessed Printed in U.S.A. ©2015 - 2017 Acuity Brands Lighting, Inc. Rev. 10/23/17 PHOTOMETRICS AVERAGE INITIAL FOOTCANDLES Multiple Units (Square Array, 60’x60’ room) Reflectances: Ceiling 80%, Wall 50%, Floor 20% Spacing RCR1 RCR3 RCR5 4'75 65 59 5'48 42 37 6'33 29 26 7'27 24 21 8'21 19 17 9'16 14 13 10'12 10 9 ZONAL LUMEN SUMMARY Zone Lumens %Lamp %Fixture 0-30°881 N/A 81.8 0-40°985 N/A 91.4 0-60°1043 N/A 96.8 0-90°1077 N/A 100.0 LUMINANCE (Average cd/m2) Degrees Average Luminance 45°45540 55°29074 65°32655 75°32882 85°25071 INITIAL FOOTCANDLES (One Unit, 11.5W, 41.6° Beam) Distance to Illuminated Plane (Feet)Footcandles Beam Center Beam Diameter 4'122.1 3.0 6'54.3 4.6 8'30.5 6.1 10'19.5 7.6 12'13.6 9.1 CANDLEPOWER DISTRIBUTION (Candelas) DegreesVertical 0° 0 1953 5 1879 15 1430 25 615 35 118 45 43 55 22 65 18 75 11 85 3 90 0 PHOTOMETRIC REPORT Test Report#: PT07162009R Catalog No: 2LEDTRIM G2 SQ 35K 80CRI FL WWH (1000L), Downlight with Flood Optic Luminaire Spacing Criteria: 0.68 Luminaire LPW: 94 400 800 1200 1600 2000 0°15° 30° 45° 60° 75° 90° LUMINANCE (Average cd/m2) Degrees Average Luminance 45°27631 55°27690 65°27306 75°26488 85°18354 AVERAGE INITIAL FOOTCANDLES Multiple Units (Square Array, 60’x60’ room) Reflectances: Ceiling 80%, Wall 50%, Floor 20% Spacing RCR1 RCR3 RCR5 4'69 62 57 5'44 39 36 6'31 27 25 7'25 22 20 8'20 18 16 9'15 13 12 10'11 10 9 ZONAL LUMEN SUMMARY Zone Lumens %Lamp %Fixture 0-30°878 N/A 88.9 0-40°919 N/A 93.1 0-60°959 N/A 97.2 0-90°987 N/A 100.0 INITIAL FOOTCANDLES (One Unit, 11.5W, 24.7° Beam) Distance to Illuminated Plane (Feet)Footcandles Beam Center Beam Diameter 4'248.7 1.8 6'110.5 2.6 8'62.2 3.5 10'39.8 4.4 12'27.6 5.3 CANDLEPOWER DISTRIBUTION (Candelas) DegreesVertical 0° 0 3979 5 3532 15 1469 25 267 35 48 45 26 55 21 65 15 75 9 85 2 90 0 PHOTOMETRIC REPORT Test Report#: PT07162008R Catalog No: 2LEDTRIM G2 SQ 35K 80CRI NFL WWH (1000L), Downlight with Narrow Flood Optic Luminaire Spacing Criteria: 0.42 Luminaire LPW: 86 800 1600 2400 3200 4000 0°15° 30° 45° 60° 75° 90° LUMINANCE (Average cd/m2) Degrees Average Luminance 45°26632 55°28507 65°28284 75°27884 85°20701 AVERAGE INITIAL FOOTCANDLES Multiple Units (Square Array, 60’x60’ room) Reflectances: Ceiling 80%, Wall 50%, Floor 20% Spacing RCR1 RCR3 RCR5 4'73 66 61 5'47 42 39 6'32 29 27 7'26 24 22 8'21 19 17 9'16 14 13 10'12 11 10 ZONAL LUMEN SUMMARY Zone Lumens %Lamp %Fixture 0-30°933 N/A 89.6 0-40°971 N/A 93.3 0-60°1012 N/A 97.2 0-90°1041 N/A 100.0 INITIAL FOOTCANDLES (One Unit, 11.5W, 19.7° Beam) Distance to Illuminated Plane (Feet)Footcandles Beam Center Beam Diameter 4'337.4 1.4 6'149.9 2.1 8'84.3 2.8 10'54.0 3.5 12'37.5 4.2 CANDLEPOWER DISTRIBUTION (Candelas) DegreesVertical 0° 0 5398 5 4633 15 1403 25 203 35 50 45 25 55 22 65 16 75 10 85 2 90 0 PHOTOMETRIC REPORT Test Report#: PT07162007R Catalog No: 2LEDTRIM G2 SQ 35K 80CRI SP WWH (1000L), Downlight with Spot Optic Luminaire Spacing Criteria: 0.34 Luminaire LPW: 91 1100 2200 3300 4400 5500 0°15° 30° 45° 60° 75° 90° Fixtures tested to IES recommended standard for solid state lighting per LM-79-08. Photometric performance on a single unit represents a baseline of performance for the fixture. Results may vary in the field. Multiplier: 80 CRI 90 CRI 27K = .94 27K = .83 30K = .97 30K = .86 35K = 1.00 35K = .88 40K = 1.03 40K = .90 G1.10.2G2 2” IC 600 AND 1000 LUMENS LED SQUARE DOWNLIGHT 2LEDTRIM G2 SQ 19123 5/21/2018 Web: www.compasslightingproducts.com • Tech Support: (866)-313-3909 701 Millennium Blvd. • Greenville, SC 29607 U.S.A. Copyright © Hubbell Lighting, Inc., All Rights Reserved Due to our continued efforts to improve our products, specifications are subject to change without notice. • Printed in U.S.A. DESCRIPTION CU2 SeriesLED Emergency Light The CU2 Series offers quality and value with a compact and attractive LED based emergency light. The white or black housing and lamp-heads are made of high impact UL flame rated thermoplastic. Lamp-heads are fully adjustable and glare-free. Snap together design for quick and easy installation with option of Wall or Ceiling mount. Remote capacity unit will run a double-head remote or 2 single-head remotes of either the Compass CIR or COR Series. Also available with self-test/self-diagnostics to monitor battery/charger failure, battery disconnect and lamp failure. FEATURES • LED life-cycle of more than 10 years • Quick installation • Dual-voltage 120 or 277V AC input • Includes long-life Nickel Cadmium (NiCad) or Nickel Metal Hydride (NiMh) battery for UL recognized 90 minute emergency lighting • Remote capacity or extended runtime option • Damp Location Listed 20°C to 30°C (68°F to 86°F) • Fully adjustable lamp-heads • Provided with test switch and AC-On indicator • Wall or Ceiling mount • Remote Capacity(RC) models have a minimum runtime of 120 minutes when no remotes are installed 0603537 03/18 DIMENSIONS Single Carton Weight: 1 lbs.Master Carton Quantity: 12 each Catalog Number Description CU2 White Finish, Dual-Head LED Emergency Light , 120/277 Input, NiCad Battery, 3 VDC, 1 Watt, CEC T20 Compliant CU2B Black Finish, Dual-Head LED Emergancy Light, 120/277 Input, NiCad Battery, 3 VDC, 1 Watt, CEC T20 Compliant CU2RC White Finish, Dual-Head LED Emergency Light, 120/277 Input, NiMh Battery, Remote Capacity, 3VDC, 1Watt CU2RCB Black Finish, Dual-Head LED Emergency Light, 120/277 Input, NiMh Battery, Remote Capacity, 3VDC, 1Watt CU2SD White Finish, Dual-Head LED Emergency Light, 120/277VAC, NiCad Batt., 3 VDC, 1 Watt, Self-Test/Self-Diagnostics, CEC T20 Compliant CU2RCSD White Finish, Dual-Head LED Emergency Light, 120/277VAC, NiMh Batt. Remote Capacity, 3VDC, 1Watt, Self-Test/Self- Diagnostics Note: Remote Capacity Unit will only power the Compass Indoor and Outdoor Remote(CIR and COR Series) ORDERING GUIDE 120 VAC 277 VAC CU2 .56 W .54 W CU2RC .92 W 1.62 W ENERGY CONSUMPTION APPLICATION The CU2 Series can be applied in stair-wells, hallways, offices and other commercial applications. STANDARDS, CERTIFICATION, AND COMPLIANCE UL924 Listed for Damp Location NFPA 101 and NFPA 70 OSHA CEC T20 Compliance WARRANTY 2 year full unit warranty SELF-DIAGNOSTIC FEATURES • Fault identification for battery, charger, LED integral lamps and remotes • Self-Testing monthly and annual for 90 minutes • Manual testing for 30 second, 15 minute and 90 minutesWall or Ceiling mount ACCESSORIESWGLZ Wireguard - 6.25” H X 14” W X 4” DCIR Series - Matching LED Indoor Remote HeadsCOR Series - Matching LED Outdoor Remote Heads CIRS CIRDC0RD C0RS EM 5/21/2018 Web: www.compasslightingproducts.com • Tech Support: (866)-313-3909 701 Millennium Blvd. • Greenville, SC 29607 U.S.A. © 2016 Hubbell Lighting, Inc., All Rights Reserved Specifications subject to change without notice. • Printed in U.S.A. CE SeriesLED Emergency Exit DESCRIPTION The CE Series offers quality and value with a compact and attractive LED based AC or emergency exit. The white or black housing is made of high impact UL flame rated thermoplastic. Snap together canopy, housing and removable chevrons for quick and easy installation. Universal single or double-face. The remote capacity option will run 4 CIR/COR Series single remote lamp- heads or 2 double CIR/COR remotes. Also available with self-test/self-diagnostics to monitor battery/charger failure, battery disconnect and lamp failure. APPLICATION The CE Series can be applied in stair-wells, hallways, offices and other commercial applications. SELF-DIAGNOSTIC FEATURES • Fault identification for battery, charger, and LED lamp • Self-Testing monthly and annual for 90 minutes • Manual testing for 30 second, 15 minute and 90 minutes FEATURES • AC Only or Emergency with battery models • LED life-cycle of more than 10 years • Molded-in template for Quick installation • Dual-voltage 120 or 277V AC input • Includes long-life Nickel Cadmium (NiCad) or Nickel Metal Hydride (NiMh) for UL recognized 90 minute emergency lighting • Remote capacity or extended runtime option • Damp Location Listed 20°C to 30°C (68°F to 86°F) • Provided with test switch and AC-On indicator • Canopy Included • Remote Capacity (RC) models have a minimum runtime of 120 minutes when no remotes are installed 0603533 04/18 STANDARDS, CERTIFICATION, AND COMPLIANCES UL924 Listed for Damp Location NFPA 101 and NFPA 70 OSHA CEC T20 Compliant WARRANTY 2 year full unit warranty 120 VAC 277 VAC CAR 1.78W 1.88W CAG 1.52W 1.48W CER 1.78 W 1.88 W CEG 1.49 W 1.57 W CERRC 3.60 W 4.14 W CEGRC 3.28 W 3.81 W ENERGY CONSUMPTION Catalog Number Description CAR White Thermoplastic Exit, Universal Face, Red LED AC Only Exit CAG White Thermoplastic Exit, Universal Face, Green LED AC Only Exit CARB Black Thermoplastic Exit, Universal Face, Red LED AC Only Exit CAGB Black Thermoplastic Exit, Universal Face, Green LED AC Only Exit CER White Thermoplastic Exit, Universal Face, Red LED Emergency Exit, NiCad Battery, CEC T20 Compliant CERB Black Thermoplastic Exit, Universal Face, Red LED Emergency Exit, NiCad Battery, CEC T20 Compliant CEG White Thermoplastic Exit, Universal Face, Green LED Emergency Exit, NiCad Battery, CEC T20 Compliant CEGB Black Thermoplastic Exit, Universal Face, Green LED Emergency Exit, NiCad Battery, CEC T20 Compliant CERRC White Thermoplastic Exit, Universal Face, Red LED Emergency Exit,Remote Capacity, NiMh Battery, CEC T20 Compliant CERRCB Black Thermoplastic Exit, Universal Face, Red LED Emergency Exit,Remote Capacity, NiMh Battery, CEC T20 Compliant CEGRC White Thermoplastic Exit, Universal Face, Green LED Emergency Exit, Remote Capacity, NiMh Battery, CEC T20 Compliant CERSD White Thermoplastic Exit, Universal Face, Red LED Emergency Exit, Self-Test/Self-Diagnostics, NiCad Battery, CEC T20 Compliant CEGSD White Thermoplastic Exit, Universal Face, Green LED Emergency Exit, Self-Test/Self-Diagnostics, NiCad Battery, CEC T20 Compliant Note: Remote Capacity Exit will only power the Compass Indoor and Outdoor Remote (CIR and COR Series) ORDERING GUIDE EX 5/21/2018 Web: www.compasslightingproducts.com • Tech Support: (866)-313-3909 701 Millennium Blvd. • Greenville, SC 29607 U.S.A. © 2016 Hubbell Lighting, Inc., All Rights Reserved Specifications subject to change without notice. • Printed in U.S.A. DIMENSIONS 12.6” Single Carton Weight: 2 lbs.Master Carton Quantity: 6 each ACCESSORIESWGLX Wireguard - 10” H X 14” W X 21⁄4” DCIR Series - Matching LED Indoor Remote HeadsCOR Series - Matching LED Outdoor Remote Heads CIRS CIRD C0RD C0RS 5/21/2018