HomeMy WebLinkAboutFile Documents.602 E Cooper Ave.0006.2018 (6).ACBK12/5/2017 9:42 PM soraya
TEMPLATE DESIGN BY: CHARLES NERON1RWUH'DPH(VW0RQWUpDO4XpEHF+1&TEL: 450-462-3632www.Muraflex.comS-6446-17_IL - BURRELL GROUP OFFICE
Aspen, CO BURRELL GROUP OFFICEAspen, CO01/18/2018
1NOV.28.17ISSUED FOR PROPOSALJD2DEC.04.17MURA-FLEX PARTITION LAY-OUT REVISEDTO MATCH ARCH. LAY-OUTJD211OFFICE209OFFICE206CONF. RM 230 SF203MECH CLO.208OFFICE207OFFICE204RESTRM201ENTRY202OFFICE210CORRIDOR205COPY COFFEE12/5/2017 9:43 PM soraya
Dec.5.17021RWUH'DPH(VW0RQWUpDO4XpEHF+1&TEL: 450-462-3632www.Muraflex.comCOMMENTREVDATE: D-M-YBYTITLE:SCALE:DRAFTSPERSON:PROJECT:PM:DATE:ARCHITECT: Phase:TEMPLATE DESIGN BY: CHARLES NERONS-6446-17_IL PROPOSALBURRELL GROUP OFFICEASPEN, COMATTERPLAN----JD----201/18/2018
1AUG-15ISSUED FOR PROPOSALGLNOTE:MURAFLEX DOES NOT ASSUME ANY RESPONSIBILITY FOR ANY ERRORSTHAT MAY OCCUR TO ANY TRADE OTHER THAN OUR OWN BY THEUSAGE OF THE DIMENSIONS AND DETAILS ON THESE DRAWINGS.ALL DETAILS ON THESE DRAWINGS ARE THE PROPERTY OF MURAFLEX.COPYING, TOTALLY OR PARTIALLY IS PROHIBITED UNLESS WRITTENAUTHORIZATION BY IT'S LEGAL REPRESENTATIVES.NOTES TO G.C.:Technical Notes to the General Contractor or other:1)Jamb Blocking:a.WƌŽǀŝƐŝŽŶĨŽƌв͟ƉůLJǁŽŽĚďůŽĐŬŝŶŐĨŽƌĂůůǀĞƌƚŝĐĂůǁĂůůattachments.2)Bulkhead construction:a.For sliding Door- Bulkhead construction to supportpoint loads of up to (to be determined) lbs with less thanϭͬϴ͟ĚĞĨůĞĐƚŝŽŶ͘b.ƉƉůLJϮůĂLJĞƌƐŽĨв͟ƉůLJǁŽŽĚĂƚďƵůŬŚĞĂĚďĞƚǁĞĞŶgyprock and framing.3)Floor at door run:a.At the travel portion on the door, the floor tolerenceƐŚŽƵůĚďĞǁŝƚŚŝŶЬ͘͟4)Floor at fixed glass:a.dŚĞĨůŽŽƌƚŽďĞůĞǀĞůĞĚǁŝƚŚŝŶнͬͲЬ͟ŽŶƚŚĞƚŽƚĂůƌƵŶ͘5)All construction areas where the Muraflex system willattach to must be plumb and level to industry standards.125378634DAABBCDCFEFEELEVATION /1MIMO Double Glazed SystemELEVATION /1OR12/5/2017 11:15 PM
Dec.5.17D11RWUH'DPH(VW0RQWUpDO4XpEHF+1&TEL: 450-462-3632www.Muraflex.comCOMMENTREVDATE: D-M-YBYTITLE:SCALE:DRAFTSPERSON:PROJECT:PM:DATE:ARCHITECT: Phase:TEMPLATE DESIGN BY: CHARLES NERONMIMO Double Glazed SystemSTANDARD--------ELEVATION----GL----D601/18/2018
1AUG-15ISSUED FOR PROPOSALGLNOTE:MURAFLEX DOES NOT ASSUME ANY RESPONSIBILITY FOR ANY ERRORSTHAT MAY OCCUR TO ANY TRADE OTHER THAN OUR OWN BY THEUSAGE OF THE DIMENSIONS AND DETAILS ON THESE DRAWINGS.ALL DETAILS ON THESE DRAWINGS ARE THE PROPERTY OF MURAFLEX.COPYING, TOTALLY OR PARTIALLY IS PROHIBITED UNLESS WRITTENAUTHORIZATION BY IT'S LEGAL REPRESENTATIVES.NOTES TO G.C.:Technical Notes to the General Contractor or other:1)Jamb Blocking:a.WƌŽǀŝƐŝŽŶĨŽƌв͟ƉůLJǁŽŽĚďůŽĐŬŝŶŐĨŽƌĂůůǀĞƌƚŝĐĂůǁĂůůattachments.2)Bulkhead construction:a.For sliding Door- Bulkhead construction to supportpoint loads of up to (to be determined) lbs with less thanϭͬϴ͟ĚĞĨůĞĐƚŝŽŶ͘b.ƉƉůLJϮůĂLJĞƌƐŽĨв͟ƉůLJǁŽŽĚĂƚďƵůŬŚĞĂĚďĞƚǁĞĞŶgyprock and framing.3)Floor at door run:a.At the travel portion on the door, the floor tolerenceƐŚŽƵůĚďĞǁŝƚŚŝŶЬ͘͟4)Floor at fixed glass:a.dŚĞĨůŽŽƌƚŽďĞůĞǀĞůĞĚǁŝƚŚŝŶнͬͲЬ͟ŽŶƚŚĞƚŽƚĂůƌƵŶ͘5)All construction areas where the Muraflex system willattach to must be plumb and level to industry standards.38"Typ.GHIJKLGH1101314121138"ELEVATION /2MIMO Double Glazed SystemELEVATION /212/5/2017 11:16 PM
Dec.5.17D41RWUH'DPH(VW0RQWUpDO4XpEHF+1&TEL: 450-462-3632www.Muraflex.comCOMMENTREVDATE: D-M-YBYTITLE:SCALE:DRAFTSPERSON:PROJECT:PM:DATE:ARCHITECT: Phase:TEMPLATE DESIGN BY: CHARLES NERONMIMO Double Glazed SystemSTANDARD-------------ELEVATION----GL----D601/18/2018
1AUG-15ISSUED FOR PROPOSALGLNOTE:MURAFLEX DOES NOT ASSUME ANY RESPONSIBILITY FOR ANY ERRORSTHAT MAY OCCUR TO ANY TRADE OTHER THAN OUR OWN BY THEUSAGE OF THE DIMENSIONS AND DETAILS ON THESE DRAWINGS.ALL DETAILS ON THESE DRAWINGS ARE THE PROPERTY OF MURAFLEX.COPYING, TOTALLY OR PARTIALLY IS PROHIBITED UNLESS WRITTENAUTHORIZATION BY IT'S LEGAL REPRESENTATIVES.NOTES TO G.C.:Technical Notes to the General Contractor or other:1)Jamb Blocking:a.WƌŽǀŝƐŝŽŶĨŽƌв͟ƉůLJǁŽŽĚďůŽĐŬŝŶŐĨŽƌĂůůǀĞƌƚŝĐĂůǁĂůůattachments.2)Bulkhead construction:a.For sliding Door- Bulkhead construction to supportpoint loads of up to (to be determined) lbs with less thanϭͬϴ͟ĚĞĨůĞĐƚŝŽŶ͘b.ƉƉůLJϮůĂLJĞƌƐŽĨв͟ƉůLJǁŽŽĚĂƚďƵůŬŚĞĂĚďĞƚǁĞĞŶgyprock and framing.3)Floor at door run:a.At the travel portion on the door, the floor tolerenceƐŚŽƵůĚďĞǁŝƚŚŝŶЬ͘͟4)Floor at fixed glass:a.dŚĞĨůŽŽƌƚŽďĞůĞǀĞůĞĚǁŝƚŚŝŶнͬͲЬ͟ŽŶƚŚĞƚŽƚĂůƌƵŶ͘5)All construction areas where the Muraflex system willattach to must be plumb and level to industry standards.Jamb MFS-0102 w/ 14"x 12" Foam padSnap-on MFS-0007 w/ 38" pile &Foam pad 14"x 58"1916"38"40 1/2" min. TYP.Trim MoldingMFS-00234 - TWO WAY TRIM5 - THREE WAY TRIM8 - CORNER TRIM6 - SLIDING DOOR POST3 - SOUND STOP7 - MULLION#10 x 2 12" sdst PH@16" c/c#10 x 2 12" sdst PH@16" c/c516"38"158"38"Post MFH-0029 & Ext. MFS-0077w/ Gasket MFG-0007Snap-on MFS-0036 & Cover MFS-003138"158"38"#10 x 34" sdst PH@12" c/cSound Stop MFS-0062Pile 38"Post MFH-0029Adaptor MFH-0106Post Cap-MFS-0031Gasket MFG-0007Foam Pad 14" x 34"3"Corner MoldingMFS-0024178"12"Bubble GasketMFG-001438"Post MFH-0029& Extension MFH-0077w/ Gasket MFG-0007Snap-on MFS-0036Cover MFS-00312 - SLIDING DOOR JAMBDoor Recever1 - TYPICAL JAMBGlass Start12/5/2017 11:15 PM
Dec.5.17D21RWUH'DPH(VW0RQWUpDO4XpEHF+1&TEL: 450-462-3632www.Muraflex.comCOMMENTREVDATE: D-M-YBYTITLE:SCALE:DRAFTSPERSON:PROJECT:PM:DATE:ARCHITECT: Phase:TEMPLATE DESIGN BY: CHARLES NERONMIMO Double Glazed SystemSTANDARD-------------SECTIONS & DETAILS----GL----D601/18/2018
1AUG-15ISSUED FOR PROPOSALGLNOTE:MURAFLEX DOES NOT ASSUME ANY RESPONSIBILITY FOR ANY ERRORSTHAT MAY OCCUR TO ANY TRADE OTHER THAN OUR OWN BY THEUSAGE OF THE DIMENSIONS AND DETAILS ON THESE DRAWINGS.ALL DETAILS ON THESE DRAWINGS ARE THE PROPERTY OF MURAFLEX.COPYING, TOTALLY OR PARTIALLY IS PROHIBITED UNLESS WRITTENAUTHORIZATION BY IT'S LEGAL REPRESENTATIVES.NOTES TO G.C.:Technical Notes to the General Contractor or other:1)Jamb Blocking:a.WƌŽǀŝƐŝŽŶĨŽƌв͟ƉůLJǁŽŽĚďůŽĐŬŝŶŐĨŽƌĂůůǀĞƌƚŝĐĂůǁĂůůattachments.2)Bulkhead construction:a.For sliding Door- Bulkhead construction to supportpoint loads of up to (to be determined) lbs with less thanϭͬϴ͟ĚĞĨůĞĐƚŝŽŶ͘b.ƉƉůLJϮůĂLJĞƌƐŽĨв͟ƉůLJǁŽŽĚĂƚďƵůŬŚĞĂĚďĞƚǁĞĞŶgyprock and framing.3)Floor at door run:a.At the travel portion on the door, the floor tolerenceƐŚŽƵůĚďĞǁŝƚŚŝŶЬ͘͟4)Floor at fixed glass:a.dŚĞĨůŽŽƌƚŽďĞůĞǀĞůĞĚǁŝƚŚŝŶнͬͲЬ͟ŽŶƚŚĞƚŽƚĂůƌƵŶ͘5)All construction areas where the Muraflex system willattach to must be plumb and level to industry standards.12"Header MFH-0083Glazing adaptor mod. MFS-0091& Snap cover MFS-0092 & 12" PileFixed w/ #8 x 58" PH Rob. SD @ 16" c/cAluminium Clamp38"3"Sliding door track MFS-0026#10 x 212" FH Rob. ST@ 8" c/c38"38"Header MFH-0083 & Glazing adaptorMFS-0091 mod. w/ Gasket MFG-0006Fixed w/ #8 x 58" PH Rob. SD @ 16" c/c& Cover MFS-00363"#10 x 212" FH Rob. ST@ 8" c/cSill MFH-0003 w/ Glazing adaptorMFS-0075-1 mod. & Al. angle12" x 34" x 116" w/ Gasket MFG-0006Fixed w/ #8 x 58" PH Rob. SD @ 16" c/c& Cover MFS-0030-114[14" Hilti KC II PFH@ 16" c/c (Min. 158" Embedment)1916"38"38"38"Aluminium Clamp3"Header MFH-0083 & Glazing adaptorMFS-0091 mod. w/ Gasket MFG-0006Fixed w/ #8 x 58" PH Rob. SD @ 16" c/c#12 x 212" FH Phil. ST@ 8" c/cSliding door track MFS-0026#12 x 214" FH Rob. Mas.@ 16" c/cSill MFH-0003 w/ Glazing adaptorMFS-0075-1 mod. & Al. angle12" x 34" x 116" w/ Gasket MFG-0006,12" Pile & Door guideFixed w/ #8 x 58" PH Rob. SD @ 16" c/c1916"Revoe ClipWSC-18 @ 24" c/cSLABSLABSLABD - SLIDING DOOR SILLC - POCKET DOOR HEADB - FIXED SILLA - DOUBLE GLAZEDF - SLIDING DOOR BOTTOME - POCKET DOOR HEAD12/5/2017 11:15 PM
Dec.5.17D31RWUH'DPH(VW0RQWUpDO4XpEHF+1&TEL: 450-462-3632www.Muraflex.comCOMMENTREVDATE: D-M-YBYTITLE:SCALE:DRAFTSPERSON:PROJECT:PM:DATE:ARCHITECT: Phase:TEMPLATE DESIGN BY: CHARLES NERONMIMO Double Glazed SystemSTANDARD-------------SECTIONS & DETAILS----GL----D601/18/2018
1AUG-15ISSUED FOR PROPOSALGLNOTE:MURAFLEX DOES NOT ASSUME ANY RESPONSIBILITY FOR ANY ERRORSTHAT MAY OCCUR TO ANY TRADE OTHER THAN OUR OWN BY THEUSAGE OF THE DIMENSIONS AND DETAILS ON THESE DRAWINGS.ALL DETAILS ON THESE DRAWINGS ARE THE PROPERTY OF MURAFLEX.COPYING, TOTALLY OR PARTIALLY IS PROHIBITED UNLESS WRITTENAUTHORIZATION BY IT'S LEGAL REPRESENTATIVES.NOTES TO G.C.:Technical Notes to the General Contractor or other:1)Jamb Blocking:a.WƌŽǀŝƐŝŽŶĨŽƌв͟ƉůLJǁŽŽĚďůŽĐŬŝŶŐĨŽƌĂůůǀĞƌƚŝĐĂůǁĂůůattachments.2)Bulkhead construction:a.For sliding Door- Bulkhead construction to supportpoint loads of up to (to be determined) lbs with less thanϭͬϴ͟ĚĞĨůĞĐƚŝŽŶ͘b.ƉƉůLJϮůĂLJĞƌƐŽĨв͟ƉůLJǁŽŽĚĂƚďƵůŬŚĞĂĚďĞƚǁĞĞŶgyprock and framing.3)Floor at door run:a.At the travel portion on the door, the floor tolerenceƐŚŽƵůĚďĞǁŝƚŚŝŶЬ͘͟4)Floor at fixed glass:a.dŚĞĨůŽŽƌƚŽďĞůĞǀĞůĞĚǁŝƚŚŝŶнͬͲЬ͟ŽŶƚŚĞƚŽƚĂůƌƵŶ͘5)All construction areas where the Muraflex system willattach to must be plumb and level to industry standards.78"#10 x 114" sdst Pan Head78"78"Door Frame MFS-0098,Snap on MFS-0099PolycarbonateH-Moulding 38" Glass316"PolycarbonateCorner-Moulding 38" Glass13 - TWO WAY TRIM14 - CORNER TRIM11 - MULLION "FLY-BY"10 - HINGED DOOR POST12 - HINGED DOOR POSTALTERNATE FRAMED GLASS DOORALTERNATE HINGED WOOD DOOR#10 x 1 14" sdst PH@16" c/c158"158"78"MFS-0100 w/ Gasket MFG-0001Snap-on MFS-0101#10 x 212" st PH@ 16" c/c3"Post MFH-0029 w/ MFS-0077Snap-on MFH-0036Door Frame MFS-0098,Snap on MFS-0099 w/ Gasket 0007134"Hinges Model 4202.35#10 x 2" st PH@ 16" c/cDoor Frame MFS-0098,Snap on MFS-0099 w/ Gasket 0007716"38"158"38"#10 x 34" sdst PH@12" c/c38"158"38"May vary dependingon Door Lever71516"12/5/2017 11:16 PM
Dec.5.17D51RWUH'DPH(VW0RQWUpDO4XpEHF+1&TEL: 450-462-3632www.Muraflex.comCOMMENTREVDATE: D-M-YBYTITLE:SCALE:DRAFTSPERSON:PROJECT:PM:DATE:ARCHITECT: Phase:TEMPLATE DESIGN BY: CHARLES NERONMIMO Double Glazed SystemSTANDARD-------------SECTIONS & DETAILS----GL----D601/18/2018
1AUG-15ISSUED FOR PROPOSALGLNOTE:MURAFLEX DOES NOT ASSUME ANY RESPONSIBILITY FOR ANY ERRORSTHAT MAY OCCUR TO ANY TRADE OTHER THAN OUR OWN BY THEUSAGE OF THE DIMENSIONS AND DETAILS ON THESE DRAWINGS.ALL DETAILS ON THESE DRAWINGS ARE THE PROPERTY OF MURAFLEX.COPYING, TOTALLY OR PARTIALLY IS PROHIBITED UNLESS WRITTENAUTHORIZATION BY IT'S LEGAL REPRESENTATIVES.NOTES TO G.C.:Technical Notes to the General Contractor or other:1)Jamb Blocking:a.WƌŽǀŝƐŝŽŶĨŽƌв͟ƉůLJǁŽŽĚďůŽĐŬŝŶŐĨŽƌĂůůǀĞƌƚŝĐĂůǁĂůůattachments.2)Bulkhead construction:a.For sliding Door- Bulkhead construction to supportpoint loads of up to (to be determined) lbs with less thanϭͬϴ͟ĚĞĨůĞĐƚŝŽŶ͘b.ƉƉůLJϮůĂLJĞƌƐŽĨв͟ƉůLJǁŽŽĚĂƚďƵůŬŚĞĂĚďĞƚǁĞĞŶgyprock and framing.3)Floor at door run:a.At the travel portion on the door, the floor tolerenceƐŚŽƵůĚďĞǁŝƚŚŝŶЬ͘͟4)Floor at fixed glass:a.dŚĞĨůŽŽƌƚŽďĞůĞǀĞůĞĚǁŝƚŚŝŶнͬͲЬ͟ŽŶƚŚĞƚŽƚĂůƌƵŶ͘5)All construction areas where the Muraflex system willattach to must be plumb and level to industry standards.Revoe ClipWSC-18 @ 24" c/cSLABSLABSLABL - WOOD DOOR SILLK - WOOD DOOR HEADI - FRAMED GLASS DOOR HEADJ - FRAMED GLASS DOOR SILLG - STANDARD DOUBLE GLAZED HEADH - FIXED SILL#12 x 214" HWH Slot Mas.@ 16" c/cSill MFH-0003Snap-on MFS-0004w/ Gasket MFG-00071916"#10 x 212" PH Rob. ST@ 16" c/c38"38"Header MFS-0102Snap-on MFS-0004w/ Gasket MFG-00071916"12"134"312"1916"78"Header MFS-0102w/ Adaptor MFS-0004 Fixedw/ #10 x 34" PH Rob. SD @ 11" c/cTo Door frame MFS-0098 & Snap-onMFS-0099 w/ Gasket MFG-0001312"134"316"#10 x 212" PH Rob. ST@ 16" c/c1916"78"Header MFS-0102w/ Adaptor MFS-0004Fixed w/ #10 x 34" PH Rob. SD @ 11" c/cTo Door frame MFS-0098 & Snap-onMFS-0099 w/ Gasket MFG-00011916"78"316"12"12/5/2017 11:16 PM
Dec.5.17D61RWUH'DPH(VW0RQWUpDO4XpEHF+1&TEL: 450-462-3632www.Muraflex.comCOMMENTREVDATE: D-M-YBYTITLE:SCALE:DRAFTSPERSON:PROJECT:PM:DATE:ARCHITECT: Phase:TEMPLATE DESIGN BY: CHARLES NERONMIMO Double Glazed SystemSTANDARD-------------SECTIONS & DETAILS----GL----D601/18/2018
1NOV.28.17ISSUED FOR PROPOSALJD2DEC.04.17MURA-FLEX PARTITION LAY-OUT REVISEDTO MATCH ARCH. LAY-OUTJDNOTES TO G.C.:- To provide 34" plywood in wall blockingvertical for all installation of Muraflex system.- To provide two 34" plywood in wall blockingat header(s) for all installation of Muraflexsystem.- Ensure that walls, ceiling and floors arelevel and plumb.NOTE:MURAFLEX DOES NOT ASSUME ANY RESPONSIBILITY FOR ANY ERRORSTHAT MAY OCCUR TO ANY TRADE OTHER THAN OUR OWN BY THEUSAGE OF THE DIMENSIONS AND DETAILS ON THESE DRAWINGS.ALL DETAILS ON THESE DRAWINGS ARE THE PROPERTY OF MURAFLEX.COPYING, TOTALLY OR PARTIALLY IS PROHIBITED UNLESS WRITTENAUTHORIZATION BY IT'S LEGAL REPRESENTATIVES.FINISHING FLOOR THICKNESS?158"3"58"58"58"58"3"Alu. Tube3" x 3"1916"38"12"3"(Typ.)1916"12" Typ.3"158"3"3"Alu. Tube3" x 3"1916"38"158"38"38"3"38"1916"3"(Typ.)12" Typ.3"158"3"58"58"158"3"58"58"158"3"58"58"DETAIL01DETAIL02DETAIL03DETAIL04DETAIL05DETAIL061916"SILL MULLION #MFS-0102ADAPTOR #MFS-0004W/ GASKET MFG-0001#10x3/4" sdst@16" c/cPost MFH-0029 w/ Gasket MFG-0007& Ext. MFS-0077 w/ Gasket MFG-0001Snap-on MFS-0036&Cover MFS-0110158"9/16" PANEL3/8" GLASS+2/(6723$66:,5(6%<27+(56SLABMasonry Screw Hex Head2 14" @ 16" c/c3"38"Header MFH-0055-1Snap-on MFS-0057w/ Gasket MFG-0007212"3"Revoe ClipWSC-18 @ 24" c/cSECTIONA12/5/2017 9:56 PM soraya
Dec.5.17D011RWUH'DPH(VW0RQWUpDO4XpEHF+1&TEL: 450-462-3632www.Muraflex.comCOMMENTREVDATE: D-M-YBYTITLE:SCALE:DRAFTSPERSON:PROJECT:PM:DATE:ARCHITECT: Phase:TEMPLATE DESIGN BY: CHARLES NERONS-6446-17_IL PROPOSALBURRELL GROUP OFFICEASPEN, COMATTERSECTIONS & DETAILS----JD----D101/18/2018
Siège Social: 5502, Notre-Dame Est, Montreal, QC H1N 2C4
t: 450.462.3632 , 1.866.962.3632, f: 450-462-7972 1.866.962.7972
www.muraflex.com
MIMO by Muraflex documentation report
Sound Transmission Class;
STC is a rating of how well a building partition attenuates airborne sound. In the USA, it is widely used
to rate interior partitions, ceilings/floors, doors, windows and exterior wall configurations. The STC
rating figures reflect the decibel reduction in noise that a partition can provide.
Ref: (see ASTM International Classification E413 and E90). Sound Reduction Index (SRI) ISO index or its
related indices are used. These are currently defined in the ISO ‐ 140 series of standards.
Wall Construction Comparison STC;
4" Drywall Wall with 5/8" Gypsum Sheets on each side – with insulation 42
4" Face brick, mortared together 45
6" Lightweight concrete block, two coats of paint each side 46.
Muraflex (MIMO) product line
Muraflex (MIMO) wall product provides a sound-absorbing system in all its multiple configurations. The
chart below will indicate in different wall conditions what the STC is represented at Muraflex (MIMO) wall
product has the ability to block sound transmission that equals or exceeds standard drywall construction.
Muraflex (MIMO) STC Values and Configurations;
Single tempered glass panel configurations;
- 3/8” Tempered Glass panel STC 34
- 1/2” Tempered Glass panel STC 36
Single laminated glass panel configurations;
- 3/8" laminated glass with a 1/8" P.V.B. STC 36
- 3/8" laminated glass with a 1/4" P.V.B. STC 37
- 1/2" laminated glass with a 1/8" P.V.B. STC 38
- 1/2" laminated glass with a 1/4" P.V.B. STC 39
01/18/2018
Siège Social: 5502, Notre-Dame Est, Montreal, QC H1N 2C4
t: 450.462.3632 , 1.866.962.3632, f: 450-462-7972 1.866.962.7972
www.muraflex.com
Double glass full-height panel configurations:
- 2 layers of 3/8” Tempered Glass panels with an airspace of 2” STC 42
- 2 layers of 1/2" Tempered Glass panels with an airspace of 2” STC 45
Double Solid full-height panel configurations:
- 2 layers of 5/8” finished substrate with an airspace of 2” STC 42
- 2 layers of 5/8” finished substrate with an airspace of 2” STC 45 (with insulation)
- Note; 5/8” substrate core is made up of particle boards, MDF, metal panels, also the finishes on
the substrate is made up of plastic laminates, melamine, veneers, fabrics, paints
dB (Decibel Curve Value);
Depending on the configuration selected, most common values vary depending on the logarithmic
calculation that has deviations in frequency Hz or pitch, that change the (Rw scale of the dB values)
Here are some blended values at different point tests;
At 400 Hz (Rw 30) holds to a 10 dB (tested under ASTM E90)
At 1,200 Hz (Rw 32) holds to a 9 dB (tested under ASTM E90)
The charts below allow visual definition to better understand the scale process, dB calculations more
often hold to better values when the surrounding conditions are well enclosed. Some important features
to consider are ceiling, flooring and masking.
01/18/2018
Siège Social: 5502, Notre-Dame Est, Montreal, QC H1N 2C4
t: 450.462.3632 , 1.866.962.3632, f: 450-462-7972 1.866.962.7972
www.muraflex.com
***
01/18/2018
Siège Social: 5502, Notre-Dame Est, Montreal, QC H1N 2C4
t: 450.462.3632 , 1.866.962.3632, f: 450-462-7972 1.866.962.7972
www.muraflex.com
Increasing Acoustical Conditions;
Glass wall systems carry certain rating and values that will get you where you need to be when absorbing
sound, however, always remember that there are many factors that need to be taken into consideration
in all workspaces. Listed below are important things to keep in mind on how noise can be reduced.
Remember values can be deflected by many other elements that may affect your space from getting the proper
sound blockage. Look for acoustical loss;
Ceiling conditions, noise is often deflected over the ceiling tiles.
Flooring conditions, does your floor amplify sound?
Lighting system, open gaps will transmit sounds into different locations
These conditions are an important element to ensure that sound to be properly absorbed, the quality of
your space is important and counts on it.
Additional Resources;
***OSHA Noise and Hearing Conservation
***ASTM ISO Index
01/18/2018
MURAFLEX
2015.07.20
DEMOUNTABLE PARTITIONS 10 22 19
SECTION 10 22 19 - DEMOUNTABLE PARTITIONS
PART 1 – GENERAL
1.1 SUMMARY
A. Section Includes:
1. Frameless glass sliding doors
2. Butt-glass walls
1.2 RELATED SECTIONS
A. Section 01 81 13 "Sustainable Design Requirements" for additional LEED requirements.
B. Section 08 41 26 “All-Glass Entrances and Storefronts.”
C. Section 08 71 00 “Door Hardware.”
D. Section 08 80 00 “Glass and Glazing.”
1.3 REFERENCES
A. ASTM E90-04 Standard Test Method for Laboratory Measurement of Airborne Sound
Transmission Loss of Building Partitions and Elements
B. ASTM C1036-06 Standard Specification for Flat Glass
C. ANSI Z97.1-2004 Safety Glazing Materials Used in Buildings ‐ Safety Performance
Specifications and Methods of Tests
D. CPSC 16 CFR 1201 Architectural Glazing Standards and Related Materials
1.4 SYSTEM DESCRIPTION
A. Performance Requirements: Provide seismic calculations and/or engineering stamps as
required.
1.5 ACTION SUBMITTALS
A. Product Data: Manufacturer’s data sheets on each product to be used, including:
1. Preparation instructions and recommendations.
2. Storage and handling requirements and recommendations.
3. Installation methods.
4. Certified test reports indicating compliance with performance requirements specified
herein.
01/18/2018
MURAFLEX
2015.07.20
DEMOUNTABLE PARTITIONS 10 22 19
B. LEED Documentation Submittals:
1. Comply with submittal requirements of Section 01 81 13 “Sustainable Design
Requirements - LEED” including, but not limited to:
a. LEED Criteria Worksheet.
b. Recycled Content Information.
c. Regional Materials Information.
d. Low Emitting Materials Information.
C. Shop Drawings:
1. Include plans, elevations, details, sections, attachments to other construction, and
accessories. Indicate dimensions, weights, conditions at openings and at storage areas,
and required installation, storage, and operating clearances.
2. Indicate details of track and door connections, rail sections, fittings, and hardware
components for all wall conditions and door types/hardware sets.
3. Indicate glass type, sizes, and details.
4. Indicate location and installation requirements for hardware and track including floor &
ceiling tolerances and direction of travel. Indicate blocking to be provided by others.
5. Indicate bracing requirements and details.
6. Setting Drawings: Show imbedded items and cutouts required in other work.
D. Samples: For each exposed product and for each color and texture specified, 6 inches (150 mm)
square in size.
E. Samples for Verification: For each type of the following products:
1. Face-Panel Finish: Manufacturer's standard-size unit, but not less than 6 inches
(150 mm) square.
2. Linear Trim: 12-inch- (300-mm-) long Samples.
3. Door Finish: Manufacturer's standard-size unit, but not less than 3 inches (75 mm)
square.
4. Glazing: Manufacturer's standard-size unit, but not less than 3 inches (75 mm) square.
5. Hardware and Accessories: Whole units.
1.6 INFORMATIONAL SUBMITTALS
A. Coordination Drawings: Drawings to integrate information from reflected ceiling plans and other
details, drawn to scale, on which the following items are shown and coordinated with each other,
using input from the installers of the items involved.
1. Structural reinforcement.
2. Locations of fixed door and window mullions.
3. Seismic bracing and related structural members when supplied.
4. Ductwork above ceiling.
B. General Contractor to provide the Manufacturer with CAD files with issue of order showing all
related information required to complete submittals.
01/18/2018
MURAFLEX
2015.07.20
DEMOUNTABLE PARTITIONS 10 22 19
1.7 CLOSEOUT SUBMITTALS
A. Manufacturers’ warranties.
B. Maintenance Data: For demountable partitions to include in maintenance manuals.
C. As-built record documents showing actual installation conditions.
D. Parts list and maintenance instructions including data on operating hardware, lubrication
requirements, and inspection procedures related to preventative maintenance.
1.8 MAINTENANCE MATERIAL SUBMITTALS
A. Furnish extra materials, from same production run, that match products installed and that are
packaged with protective covering for storage and identified with labels describing contents.
1. Partition Components: Furnish a quantity of each type of full-size unit with installation
tools and materials equal to one percent of the amount installed, but no fewer than two
units.
1.9 QUALITY ASSURANCE
A. Manufacturer Qualifications: Not less than 5 years experience in the actual production of
specified products
1. Product certificates signed by manufacturer certifying materials comply with specified
performance characteristics and criteria, and physical requirements.
B. Installer Qualifications: Qualified installer to have minimum 5 years documented experience in
installation of system similar in complexity to those required for this Project.
1. Acceptable to or licensed by manufacturer.
2. Successfully completed not less than 5 comparable scale projects.
C. Mockups: Build mockups to verify selections made under Sample submittals, to demonstrate
aesthetic details, and to set quality standards for fabrication and installation.
1. Build mockups for demountable partitions including accessories. (If required)
2. Approval of mockups does not constitute approval of deviations from the Contract
Documents contained in mockups unless Architect specifically approves such deviations
in writing. (If required)
3. Subject to compliance with requirements, approved mockups may become part of the
completed Work if undisturbed at time of Substantial Completion. (If required)
01/18/2018
MURAFLEX
2015.07.20
DEMOUNTABLE PARTITIONS 10 22 19
1.10 FIELD CONDITIONS
A. Finished Spaces: Do not deliver or install demountable partitions until finishes in spaces to
receive them are complete, including suspended ceilings, floors, carpeting, and painting.
B. Field Measurements: Verify actual measurements/openings by field measurements before
fabrication and indicate the measurements on Shop Drawings. Coordinate fabrication schedule
with construction progress to avoid project delays. General Contractor to ensure that walls and
bulkhead are installed before manufacturer of demountable partitions takes field measurements.
The site must be available for field measuring within an acceptable and agreed upon lead time.
C. Maintain environmental conditions (temperature, humidity, and ventilation) within limits
recommended by manufacturer for optimum results. Do not install products under
environmental conditions outside manufacturer’s absolute limits.
1.11 DELIVERY, STORAGE, AND HANDLING
A. Deliver materials in manufacturer’s original, unopened, undamaged packaging with
identification labels intact.
B. Store products in manufacturer’s unopened packing until ready for installation.
C. Store materials protected from exposure to harmful weather conditions and at temperature &
humidity conditions recommended by manufacturer.
1.12 COORDINATION
A. Coordinate work with other operations and installation of adjacent surfaces to avoid damage of
installed materials.
B. Coordinate work with adjacent floor, wall, and ceiling construction to accommodate frame
anchorage, system track, and hardware.
1.13 WARRANTY
A. Submit, for Owner’s acceptance, manufacturer’s standard warranty document executed by
authorized company official. Manufacturer’s warranty is in addition to, and not a limitation of,
other rights Owner may have under Contract Documents.
01/18/2018
MURAFLEX
2015.07.20
DEMOUNTABLE PARTITIONS 10 22 19
PART 2 – PRODUCTS
2.1 PERFORMANCE REQUIREMENTS
A. Surface-Burning Characteristics: Comply with ASTM E 84; testing by a qualified testing
agency. Identify products with appropriate markings of applicable testing agency.
1. Flame-Spread Index: 25 or less.
2. Smoke-Developed Index: 450 or less.
PART 3 – PRODUCTS
3.1 MANUFACTURER
A. Acceptable Products, and basis of design:
1. MIMO, by Muraflex, as represented by local authorized Muraflex Rep Group.
3.2 MATERIALS
A. Aluminum Components: Conforming to ASTM B221-08 Standard Specification for Aluminum
and Aluminum‐ Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
B. Glass: Provide fully tempered glass (Kind FT) complying with ASTM C1036 and ASTM
C1048 requirements, including glass indicated by reference to type, class, and quality.
C. Adhesives: As recommended by demountable-partition manufacturer and with a VOC content
of 70 g/L or less when calculated according to 40 CFR 59, Subpart D (EPA Method 24).
01/18/2018
MURAFLEX
2015.07.20
DEMOUNTABLE PARTITIONS 10 22 19
3.3 FRAMELESS SLIDING, HINGED GLASS DOOR & GLASS WALL, SWING WOOD DOOR,
WOOD PANELS & VENEER
A. Track: Extruded aluminum – single track profile must have flexibility of allowing the use of
3/8”, ½” or 5/8” glass, allow the glass to be center mounted, offset mounted to inside or outside,
or the use as a double pane system. System must be modular and reconfigurable with regards to
changing out glass thickness, plane of installation, and being able to retrofit to double pane
system for future applications.
1. Ceiling Track:
a. Size: 3 inches wide x 1-9/16 inches high x full length
b. Attached to suspended ceiling via caddy clips
2. Floor Track:
a. Size: 3 inches wide x 1-9/16 inches high x full length
b. Carpet grippers integral to aluminum extrusion
c. Leveling tray included
3. Finish: Architect/Designer to select from one of 14 standard finishes.
B. Glass Walls
1. Clear tempered glass conforming to ASTM C1048
2. Thickness: 10mm or 12mm as shown on drawings
3. Vertical Edges: Muraflex counter-profile chamfer with double-sided polish edges
4. Seams: Butt joints
5. Vertical “Slim Trim” 3/8” or 1/2”, profile to fit counter- profile on glass for in-line
elevation run, finish to match glass or aluminum
6. Top captured by aluminum channel set into Ceiling Track
7. Bottom captured by aluminum channel integral to Base Track assembly
8. Aluminum Finish: To be selected by Architect/Designer.
C. Frameless Glass Sliding Doors/ Telescoping Doors
1. Clear tempered glass conforming to ASTM C1048
a. Thickness: 10mm or 12mm as shown on drawings
b. Edges: Muraflex chamfer Polished
c. Door: Panel to slide within the floor track
2. Hardware: To be coordinated with selected manufacturer to provide the following
functions:
a. Double roller ball-bearing running gears
b. Adjustable clamp shoes with Full Width Fascia
c. Acoustic seals
d. Ladder pull: Model, length, locking/non-locking as required
e. Finish: Brushed stainless steel
01/18/2018
MURAFLEX
2015.07.20
DEMOUNTABLE PARTITIONS 10 22 19
D. Frameless Glass Hinge Door
1. Clear tempered glass conforming to ASTM C1048
a. Thickness: 10mm or 12mm as shown on drawings
b. Edges: Muraflex chamfer Polished
2. Hardware: To be coordinated with selected manufacturer to provide the following
functions:
a. Glass door Hinges
b. Acoustical seal
c. Patch Handel + Leaver. c/w stainless steel door strike (as per door and
schedule)
d. Finish: (as per door + hardware schedule)
E. Solid Core 1-3/4” thick. Hinge Door
1. 5 ply veneer door
a. Clear Lacquer finish 35˚ gloss
b. Veneer as specified in section G
2. Hardware: To be coordinated with selected manufacturer to provide the following
functions:
a. Wood door Hinges
b. Acoustical seal
c. Patch Handel + Leaver. c/w stainless steel door strike (as per door and
schedule)
d. Finish: (as per door + hardware schedule)
F. Wood Panel
1. Medium density fiberboard core
a. Laminated with veneer as specified in section G
b. Veneer as specified in section G and supplied with backer veneer with
equivalent strength to face veneer for balance
c. 1/2” or 5/8” thick. Panel as required
G. Veneer
1. Veneer for hinged door & wood panels
a. Specified Veneer species
b. Specified supplier Veneer
c. Specified Flitch No.
d. Clear finish with specified sheen
e. Specified stain to match
01/18/2018
MURAFLEX
2015.07.20
DEMOUNTABLE PARTITIONS 10 22 19
3.4 FABRICATION
A. General: Fabricate demountable walls for installation with concealed fastening devices and
pressure-fit members that will not damage ceiling or floor coverings. Fabricate systems for
installation with continuous seals at floor, ceiling, and other locations where partitions abut
fixed construction.
B. Fabricate components in sizes, profiles, and configurations as indicated on the approved shop
drawings.
C. Fabricate doors with required fittings.
D. Fabricate doors and walls to allow for minimum clearances.
E. Rigidly fit and secure joints and corners. Make joints and connections flush, hairline, and
soundproof.
F. Prepare components to receive anchor devices and hardware.
G. Arrange fasteners, attachments, and jointing to ensure concealment from view.
H. Prepare components with drillings for door hardware.
I. Wiring: Conceal conductors and cables in raceways. Bundle, lace, and train conductors to
terminal points with no excess and without exceeding manufacturer's limitations on bending
radii.
3.5 GENERAL FINISH REQUIREMENTS
A. Protect mechanical finishes on exposed surfaces from damage by applying a strippable,
temporary protective covering before shipping.
B. Appearance of Finished Work: Noticeable variations in same piece are not acceptable.
Variations in appearance of adjoining components are acceptable if they are within the range of
approved Samples and are assembled or installed to minimize contrast.
3.6 ALUMINUM FINISHES
A. Standard finish: Clear Anodic Finish: AAMA 611, Class II, 0.010 mm or thicker clear anodic
coating over a non-specular as fabricated mechanical finish.
01/18/2018
MURAFLEX
2015.07.20
DEMOUNTABLE PARTITIONS 10 22 19
PART 4 - EXECUTION
4.1 EXAMINATION
A. Do not begin installation until substrates have been properly prepared.
B. Verify prepared openings are in accordance with Shop Drawings.
C. Verify wall openings are ready to receive work of this section.
4.2 PREPARATION
A. Clean surfaces thoroughly prior to installation.
B. Prepare surfaces using methods recommended by the manufacturer for achieving the best result
for the substrate under the project conditions.
4.3 INSTALLATION
A. General: Install demountable partitions after other finishing operations have been completed.
1. Install in accordance with manufacturer’s instructions.
2. Install partitions rigid, level, plumb, and aligned. Install seals at connections with floors,
ceilings, fixed walls, and abutting surfaces to prevent light and sound transmission.
3. Broken, cracked, chipped, deformed, or unmatched panels and components are not
acceptable.
4. Except for filler panels scribed to fixed walls or columns, do not modify manufacturer's
standard components.
B. Install demountable glass walls and accessories after other finishing operations, including
painting, have been completed.
C. Match glazing by installing from marked packages in numbered sequence indicated on Shop
Drawings.
D. Align assembly plumb and to indicated position, free of warp or twist. Maintain assembly
dimensional tolerances, aligning with adjacent work.
E. Suspended-Ceiling System: Make alterations to suspended-ceiling system required by partition
installation or to gain access to electrical or communication systems without affecting the
structural integrity of suspended-ceiling system. Make alterations so they are not noticeable
after panel installation.
F. Doors and Frames: Install door-and-frame and glazing-and-glazing-frame assemblies securely
anchored to partitions and with doors aligned and fitted. Install and adjust door hardware for
01/18/2018
MURAFLEX
2015.07.20
DEMOUNTABLE PARTITIONS 10 22 19
proper operation.
4.4 ERECTION TOLERANCES
A. Install each demountable partition so surfaces vary not more than 1/8 inch (3 mm) from the
plane formed by the faces of adjacent partitions.
4.5 ADJUSTING
A. Inspect installation, correct misalignments, and tighten loose connections.
B. Adjust doors to operate smoothly and easily, without binding or warping.
C. Check and readjust operating hardware. Verify that latches and locks engage accurately and
securely without forcing or binding; lubricate as recommended by manufacturer.
D. Clean soiled surfaces to remove dirt, fingerprints, adhesives, and other foreign materials
according to manufacturer's written instructions.
E. Remove and replace defaced or damaged components that cannot be satisfactorily repaired.
F. Remove and replace components that are wet, moisture damaged, or mold damaged.
4.6 PROTECTION
A. Protect installed products and finish surfaces from damage until completion of project.
B. Touch-up, repair, or replace damaged products before Substantial Completion.
4.7 CLEANING
A. After installation and adjusting, clean metal and glass surfaces to remove dust, loose fibers,
fingerprints, adhesives, and other foreign materials.
4.8 DEMONSTRATION
A. Engage a factory-authorized service representative to train Owner's maintenance personnel to
adjust, operate, and maintain demountable partitions when using a new installer not yet certified
by the manufacturer. When engaging installers without supervision provided by the manufacturer,
the installers must be certified by the manufacturer.
END OF SECTION 10 22 19
01/18/2018