HomeMy WebLinkAboutFile Documents.455 Rio Grande Pl.0095.2018.ACBK1 OF 1
MULTI
NTS
JGS
04-JAN-12PROJECTNAMECITY, STATECUSTOMER NAMESO10XXXXXXXLEVEL 2 PANEL.DWG
VIEW:
SCALE:
DRAWN BY:
CHECKED BY:
APPROVED BY:
DATE:
FILE:PROJECT NAME :SALES ORDERREV DRAFTERCUSTOMER :QUOTE #DATE
SHEET$5025&25(UL 752 - LEVEL 2TYPICAL INSTALLATION
UL752 Level 2
Waco Composites302 S. 27th St., Waco, TX 76710 866-688-3088 phone 254-752-3634 Fax www.armorcore.com
PANEL SIZES: 3’ x 8’, 3’ x 9’, 3’ x 10’
4’ x 8’, 4’ x 9’, 4’ x 10’
5’ x 8’, 5’ x 9’, 5’ x 10’
Custom sizes available
NOM. WEIGHT: 3.6 lbs per square foot
NOM. THICKNESS: 5/16”
PRODUCT APPLICATIONS:
ArmorCore Bullet Resistant Panels can be
used in walls, furniture, doors, vehicles and as
blast protection barriers. They can be covered
with drywall or laminate so as not to impact
aesthetics.
Commercial
• Banks and credit unions
• Convenience stores
• Check cashing facilities
• Data centers
Government
• Courthouses/courtrooms
• Prisons
• Administrative offices
• Public safety facilities
Healthcare
• Hospitals and clinics
• Pharmacies
Residential
• Safe rooms
• Storm shelters
Military
• Transport vehicles
• Housing
• Base entrances
OTHER PRODUCTS AVAILABLE:
ArmorCore® Bullet Resistant Fiberglass Panels
are manufactured at all 8 Levels of UL752
Standards and NIJ0108.01 specifications.
SUBMITTALS:
Submittals and samples are available upon
request.
PERFORMANCE LEVEL:
• UL752 Standard for Bullet Resisting Equipment – Level 2
Paragraph 4.4
• National Institute of Ballistic Standards NIJ0108.01 – Level II-A
• One Hour Fire Rating Per ASTM E119-98
AMMUNITION TESTED:
.357 magnum jacketed lead soft point – 158 grain, 10.2 grams,
minimum 1250 feet per second.
PRODUCT INFORMATION:
The panels are made of multiple layers of woven roving ballistic grade
fiberglass cloth impregnated with a thermoset polyester resin and
compressed into flat rigid sheets. The production technique and
materials used provide the controlled internal delamination to permit
the capture of a penetrating projectile.
PRODUCT BENEFITS:
• Easy to install
• Effective delay against forced entry
• Low wicking – preventing buildup of mold
• Nontoxic materials – no formaldehyde
UNIQUE TO WACO COMPOSITES:
• ISO 9001-2015 registered
• Superior customer service
• Continuous product testing to ensure ballistic integrity
• Factory CNC water jet cutting
PRODUCT INSTALLATION:
We suggest using a diamond-grit blade for cutting the material. A
TSD180D 7” Tenryu circular blade is available for purchase through
our office. Panels may be attached using self-tapping drywall screws
or construction adhesive. Pre-drilling may be required for thicknesses
1.125” or greater. With proper pre-preparation, panels can be painted
with oil or water based paints. Installation instructions are available
upon request.
All joints need to be reinforced by a 4” batten strip.
WARRANTY POLICY:
All ArmorCore materials and workmanship shall be warranted against
defects for a period of ten (10) years from the date of receipt at the
project site. We will repair or replace ArmorCore Panels at our
discretion, found upon our inspection, to be defective in material or
our workmanship for up to ten (10) years from the date of receipt at
the project site.