HomeMy WebLinkAboutFile Documents.520 E Durant Ave.0095.2017 (4).ACBKDue to continuous product improvement, information in this document is subject to change. All published photometric testing performed to IESNA LM-79-08 standards by a NVLAP certified laboratory. Fixture photometry was completed on a single representative fixture. Actual production units may vary up to ±10% of initial delivered lumens. Lumen maintenance values at 25˚C (77˚F) are calculated per TM-21 based on LM-80 data and in-situ fixture testing.
1501 96th Street, Sturtevant, WI 53177 | Phone (888)243-9445 | Fax (262)504-5409 | www.e–conolight.com
ONE AND TWO CIRCUIT TRACK4 FEET, 6 FEET, & 8 FEET(E-K1T & E-K2T SERIES)
Applications: For general purpose track lighting in indoor commercial, retail, or industrial applications.
Catalog #Description Length with End Cap(Two End Caps Standard with Each Track)
E-K1T4*1 Circuit 4' track 47-11/16"
E-K1T6*1 Circuit 6' track 71-11/16"
E-K1T8*1 Circuit 8' track 95-11/16"
E-K2T4*2 Circuit 4' track 47-11/16"
E-K2T6*2 Circuit 6' track 71-11/16"
E-K2T8*2 Circuit 8' track 95-11/16"
Performance
Construction & Materials
Electrical
Regulatory
• 1-year limited warranty
• UL and cUL Listed
• Suitable for dry locations
• Listed to use with existing Juno® T & TU systems (not affiliated with e-conolight).
• Features an extruded aluminum body,
• Features a Lexan® fittings, a Noryl® insert and No. 12 AWG solid
copper conductors
• Fixtures can be surface or pendant mounted
• Each track section includes two dead ends and mounting hardware
• Easy to cut to the exact size needed right at the job site
• Two circuit track offers double load capacity which allows more
fixtures per section
• Two circuit track offers the ability of each circuit to be switched separately
with the abililty to create three different schemes on one section of track:
first circuit on only, second circuit on only, or both circuits on together
(*) Specify finish color. K=Black, W=White
NOTE: With two circuit track 40 Amps consists of two 20 Amp feeds on different phases sharing a common neutral
feed line. If both circuits are on the same phase, the total load between two circuits is limited to 20 Amps.
One-Circuit Track
1.425"
.688"
.825"
1.425"
Two-Circuit Track
1.425"
.688"
.825"
1.425"
Due to continuous product improvement, information in this document is subject to change. All published photometric testing performed to IESNA LM-79-08 standards by a NVLAP certified laboratory. Fixture photometry was completed on a single representative fixture. Actual production units may vary up to ±10% of initial delivered lumens. Lumen maintenance values at 25˚C (77˚F) are calculated per TM-21 based on LM-80 data and in-situ fixture testing.
1501 96th Street, Sturtevant, WI 53177 | Phone (888)243-9445 | Fax (262)504-5409 | www.e–conolight.com
ONE AND TWO CIRCUIT TRACK4 FEET, 6 FEET, & 8 FEET(E-K1T & E-K2T SERIES)
Cord & Plug Feed • 15' cord
• 3 prong plug
• 6-amp capacity
• Not UL listed• L: 3.28"CAT. #E-KC211*
Floating Feed • Mounts to outlet box to
provide power feed at any point
on track. Includes mounting hardware• 4.6" sq. H: 1.6"CAT. #E-KC261*CAT. #E-KC262*
Conduit Feed • Accepts 1/2" conduit (male threaded)
fitter for surface wiringCAT. #E-KC271*CAT. #E-KC272*• Same as above but opposite polarity.
• L: 3"CAT. #E-KC271A*CAT. #E-KC272A*
Outlet Box Feed • End feed with outlet box cover and
mounting strapCAT. #E-KC291*CAT. #E-KC292*• Same as above but opposite polarity.
• 4.25" sq.CAT. #E-KC291A*CAT. #E-KC292A*
T-Bar End Feed
• End feed for T-Bar-mounted track.
• Three 1/2" knockouts.• 4.2" sq.CAT. #E-KC361*CAT. #E-KC362*
End Feed
• Allows feed from above with Romex,
Greenfield or conduit. Use as end
feed when track is suspended with pendantsCAT. #E-KC381*CAT. #E-KC382*
• Same as above but opposite polarity.• L: 3.28"CAT. #E-KC381A*CAT. #E-KC382A*
Adjustable Connector
• Adjusts to connect two track
sections either at a 90° angle or a
straight run. Includes covers for both possibilities. 1/2" knockout provided
for through-wall conduit. 90° option
- L: 2.8" W: 2.8" Straight -run option
- L: 4.2"CAT. #E-KC231*CAT. #E-KC232*Note: If fed from an outlet box, use the E-KC231 Outlet Box cover when using this connector as a feed
"T" Connector
• Joins three track sections
CAT. #E-KC241*
CAT. #E-KC242*• Same as above but opposite polarity.
• L: 4.2" W: 2.8"CAT. #E-KC241A*CAT. #E-KC242A*Note: If fed from an outlet box, use the E-KC231 Outlet Box cover when using this connector as a feed
"X" Connector • Joins four track sections.
• 4.2" sq.CAT. #E-KC251*CAT. #E-KC252*Note: If fed from an outlet box, use the E-KC231 Outlet Box cover when using this connector as a feed
Outlet Box Cover • Use with either single or
two-circuit adjustable, "T" or "X"
Connectors when feeding at outlet box.• 4.062" sq.CAT. #E-KC311*
Mini Straight Connector • Connects two track sections
end-to-end.
• One-Circuit L: .3125"• Two-Circuit L: .4375"CAT. #E-KC221*CAT. #E-KC222*
T-Bar Adjustable Connector/Feed • Adjustable connector for T-Bar-
mounted track. Joins two track
sections for either 90° angle or straight run.• Three 1/2" knockouts.
• 4.2" sq.CAT. #E-KC381*CAT. #E-KC382*
Monopoint Mounting
• Mounts directly to any outlet box. Not for use with low voltage fixtures with external power
supplies. 4-3/4" dia.CAT. #E-KC100*
T-Bar Attachment Clips(Drop Tiles) • Fastens track to 1" inverted tee with
drop tiles
• Use one for each 2' of trackCAT. #E-KC124*
T-Bar Attachment Clips(Flush Tiles) • Fastens track to 1" inverted tee
with flush tiles
• Use one for each 2' of trackCAT. #E-KC123*
Pendant Adaptor
• To support chin-hung fixtures up to 10lbs• 3/8" wiring holeCAT. #E-KC122*