HomeMy WebLinkAboutFile Documents.520 E Durant Ave.0095.2017 (5).ACBKRESTORATION HARDWARE
PARTS ENCLOSED
ITEMS DIAGRAM DESCRIPTION QTY.
(C)Wire Nut
(E)Bulb+Spare 10+4
TO ASSEMBLE:
PRODUCT DESCRIPTION:
General material: Glass & Iron
IMPORTANT SAFETY INSTRUCTIONS:
1. Use an authorized and certified electrician for consultation and
installation. Electrician must be familiar with commercial-type applications
of very heavy chandeliers.
2. This fixture has been rated for 10 x 25-watt maximum E12 standard bulb.
4. The ceiling must have at least the capacity of 5 times the weight of the ceiling light.
For this light at least a ceiling capacity of 107.5kg is required.
Warnings:
1. Turn-off electricity supply at main circuit panel before installing. Do not connect
electricity supply until your ceiling light is fully assembled and installed.
5. The manufacturer and distributor accepts no liability for incorrect installation.
2. All wires are connected. Do not remove the ceiling light from its packaging by pulling
on the power cord, as a bad connection may result.
3. To reduce the risk of fire, electrical shock, or personal injury, always turn off the
ceiling light and allow it to cool prior to replacing light bulb. Do not touch bulb when
fixture is turned on or look directly at light bulb. Keep flammable materials away from
light bulb.
4. Deviation from instructions may result in a risk of fire or electric shock.
CARE INSTRUCTIONS:
1. Make sure that the power is turned off and bulb has cooled before handling.
2. Wipe clean with a dry cloth / mild soapy solution. Do not use corrosive cleaners.
3. The cable/cord of this ceiling light cannot be replaced: If the cable is damaged, do
not use the light.
6. For indoor use only.
ENVIRONMENT:
Special waste handling may be required. Please contact your local authorities for more
information.
3. To avoid the risk of fire, do not exceed the recommended wattage.
7. Keep away from children.
3
(A)
(B)
Junction Box(Not included)
100LB. MIN.FIXTURE RATED
1
Mounting Screws
(Not included)12 Sets
Height: 16.0 cm(6.30in)
Length:153.5 cm(60.43in)
Weight: 21.5kg ( 47.3 lb)
Grounded / Hardwired
(D1)
(D2)
(D5)
E
D5
D1
D2
D4D3
A
C
B
SPIRIDON LINEAR CHANDELIER 60"
D6
Width:17.2 cm(6.77in)
Ceiling Plate
Nut
Ceiling Box
1
1
3
3
1
Screw Cap
Body
(D3)
(D4)
1. Carefully remove all parts from the box and remove all plastic covering.
2. Turn OFF power to the junction box where the ceiling light will be installed.
3. Loosen the nut and screw cap (D3 and D4) and remove the ceiling plate (D1) from the
ceiling box (D2)
5. Connect the ground wire from the fixture to the ground junction box wire (Usually the
green or bare wire) with a wire nut (C) and wrap the connection with electrical tape.
Connect the hot wire to the hot junction box wire (Usually black or smooth) with a plastic
wire nut (C) and wrap the connection with electrical tape. Connect the neutral wire to
the neutral junction box wire (Usually white or ribbed) with a plastic wire nut (C) and
wrap the connection with electrical tape.
8. Fasten lightbulbs (E) to the lampholders.
4. Attach the ceiling plate (D1) to ceiling with mounting screws (B).
9. Restore power to the junction box and test ceiling light fixture.
6. Move the ceiling box (D2) up to the ceiling, then fasten the nut and screw cap (D3 and D4).
7.1. Press and loosen the height adjustable wire locking device (D6) to adjust the length
of the steel wire in order to let the ceiling light fixture down and level it.
7.2. Insert the steel wire into height adjustable wire locking devire (D6) in order to let the
ceiling fixture go up to the suitable height and level it.