HomeMy WebLinkAboutChange Order.905 Chatfield Rd.0085.2019 (2).ARBKLS GROUP
BASALT OFFICE
20 SUNSET DRIVE UNIT 9, BASALT, CO 81621
970.927.5133
DENVER OFFICE
931 SANTA FE STE. 200, DENVER, CO 80204
303.573.0059
WWW.LS.LIGHTING
To:CCY Phone:970.927.4925
Attn:Gage Reese CC:Katie Bauer
From:LS Group Phone:303.573.0059
RE:SILVERSTEIN RESIDENCE Date:2019.03.22
Gage and Katie,
Attached please find our BUILDING PERMIT CHANGE ORDER 1 lighting plans and specifications.
Thank you,
Elise Streeb
Contractor to provide submittals prior to order for all fixtures included in this package. All items, including
but not limited to:
• finish
• color temperature
• driver type
• beam spread
• mounting hardware
• lamp type
• accessories
• voltage
• dimming type / compatibility
• wattage
• length / size
• collar depth
• housing type
06/10/2019
LS GROUP
SILVERSTEIN RESIDENCE PAGE 2 OF 77
BUILDING PERMIT CHANGE ORDER 1
2019.03.15
• All fixture wiring shall be of the heat resistant type, or as required by local code.
• Manufacturers and contractor shall be responsible for proper ventilation and temperature conditions of light
fixtures.
• All fixtures with removable covers or cones shall be supplied with safety chains or wiring securely attached to
main housings. There shall be a sufficient quantity of safety supports to hold total weight of fixture.
• The contractor shall verify with the architect and/or engineer that all lighting equipment meets all national
and local codes as applicable, e.g. thermal protection and UL label.
• Budget pricing has been secured for all products specified and is used in the preparation of preliminary
opinions of probable costs. A record of specific unit costs has been shared confidentially with the owner to
assist in the analysis of bid submittals.
• Contractor shall submit to the lighting consultant, for written approval, manufacturer’s catalogue specification
sheets for all light fixtures prior to purchase of the same. Manufacturer must provide shop drawings for all
custom fixtures. All accessories, parts, lamps, transformers etc. shall be provided in submittals. All mounting
hardware not listed in the spec to be provided by contractor.
• Contractor shall submit for approval of the lighting consultant detailed drawings of all special design fixtures
prior to fabrication of it.
• Contractor shall provide a complete list of all lamps that will be furnished on the project.
• Voluntary product substitutions from the contractor will not be considered without prior written approval
to submit from the lighting designer. LS reserves the right to bill additional services for reviewing alternate
fixture submittals.
• If contractor elects to submit substitutions, all products in a group, with similar function and appearance, such
as recessed and adjustable downlights, fluorescent troffers, exit signs, lamps, or etc., must be supplied from
the same manufacturer. If a family of fixtures is submitted from more than one manufacturer, contractor will
be asked to resubmit package based on single manufacturer.
• If contractor elects to provide substitutions for LED lamps (with approval from lighting consultant), contractor
shall provide documentation from lamp manufacturer, power supply (ballast/driver/transformer/etc.)
manufacturer, and lighting control manufacturer that all lamp-power supply-lighting control combinations
provided on the project have been tested for compatibility and approved by all manufacturers concerned.
This documentation must be provided at time of package submittal, or package will be sent back for
resubmittal.
• All component parts of architectural lighting installations (i.e., mounting components, grid accessories, track
accessories) shall be provided by general contractor.
• Color and finish specification shall be by the architect / interior designer unless otherwise designated in this
specification.
• Contractor shall verify ceiling construction for each fixture type and location and shall coordinate trim details.
• By approving and submitting shop drawings, product data, samples and similar submittals, the contractor
represents that the contractor has verified materials, field measurements and field construction criteria, and
has checked and coordinated the information contained within such submittals against the requirements of
the work and contract documents.
• Unless otherwise specified, voltages of all luminaires shall be verified by the electrical engineer.
• Unless otherwise specified, initial purchase of lamps shall include 10% spare quantity of lamps.
• All fluorescent lamps, unless otherwise noted, shall be 3500K.
• Luminaires used any time during construction as work lights must be relamped by the contractor, with the
project-specified lamp, just prior to turnover of area to owner. Contractor responsible for protection of
luminaire components during construction. If luminaires are damaged due to any of the following, but not
limited to, paint, debris, construction vibrations, it is the contractor’s sole responsibility to replace damaged
components.
• Contractor to ensure that transformer/driver/power supply locations comply with national and local electrical
codes. Contractor to review locations of transformers with design team prior to installation to avoid conflict
with interiors/architecture.
• Transformers should be loaded by no more than 90% of its rating.
• In IC conditions, all housing requirements to be coordinated by Contractor with reference to R-values and
insulation conditions. Manufacturer information provided on cutsheets. If information is not provided, the
Contractor is to review building conditions prior to purchasing fixtures. If specification / manufacturer spec
does not meet local requirements, alternate specifications can be submitted for review.
GENERAL NOTES
06/10/2019
SILVERSTEIN RESIDENCE PAGE 24 OF 77
BUILDING PERMIT CHANGE ORDER 1
2019.03.15
LS GROUP
TYPE MANUFACTURER MODEL DESCRIPTION NOTES
B1-FL PHILIPS L3-A-E-1
L3-08-90-27-F
L3-S-A-D-W
LYTECASTER 3" ACCENT NEW CONSTRUCTION IC HOUSING.
ELV/TRIAC DIMMING. 120V
LIGHT ENGINE. 800 LUMENS. 90CRI. 2700K. FLOOD, 27DEG
BEAM.
SQUARE TRIM ADJUSTABLE DIFFUSE CONE. WHITE FINISH.
LyteCaster_L3S_Adjustable 11/18 page 1 of 6
Lightolier LyteCaster LED Accent adjustable features a 3.5" luminaire height
that conserves plenum space without compromising the 35° adjustable
tilt. The modular and interchangeable light engine allows for an easy future
upgrade. The accent adjustable is damp location listed and comes in
2 standard finish options.
Project:
Location:
Cat.No:
Type:
Lamps: Qty:
Notes:
Downlighting
LyteCaster LED 3" Accent
L3SAD Square Adjustable
Complete product = Frame-in kit + Light engine + Trim Order each separately
Ordering guide: Square trim Example: L3SAD
Series
L3
Shape
S
Luminaire type
A
Finish
D
Flange
L3 LyteCaster 3"
Accent
S Square A Adjustable D Diffuse cone blank White
A Aluminum
Ordering guide: Frame-In kit Example: L3AE1
Series
L3
Frame type Dimming Input voltage
L3 LyteCaster 3"
Accent
A AirSeal IC, New Construction, Screw
AN AirSeal IC, New Construction, Nail
E ELV/Triac dimming 1 120V
N New Construction Non-IC Z10 0-10V U Universal (120-277V)
Ordering guide: Light engine Example: L308830NF
Series
L3
Lumens
08
CRI CCT Beam Option
L3 LyteCaster 3"
Accent
08 800 8 80 27 2700K
30 3000K
35 3500K
S Spot, 16°
NF Narrow flood, 20°
F Flood, 27°
9 90 27 2700K
30 3000K 1
S Spot, 16°
NF Narrow flood, 20°
F Flood, 27°
CW CrispWhite 1
1. 3000K and CrispWhite must be ordered together
06/10/2019
SILVERSTEIN RESIDENCE PAGE 25 OF 77
BUILDING PERMIT CHANGE ORDER 1
2019.03.15
LS GROUP
TYPE MANUFACTURER MODEL DESCRIPTION NOTES
B1-FL PHILIPS L3-A-E-1
L3-08-90-27-F
L3-S-A-D-W
LYTECASTER 3" ACCENT NEW CONSTRUCTION IC HOUSING.
ELV/TRIAC DIMMING. 120V
LIGHT ENGINE. 800 LUMENS. 90CRI. 2700K. FLOOD, 27DEG
BEAM.
SQUARE TRIM ADJUSTABLE DIFFUSE CONE. WHITE FINISH.
LyteCaster_L3S_Adjustable 11/18 page 2 of 6
L3SAD LyteCaster LED 3" Accent
Square Adjustable
Frame
LED Module
Accessory lm
(optional)
Accessory holder
(optional)
Flange
Reector
Mounting
springs
Horizontal
Aim
Assembled configuration:
1. Frame Galvanized steel construction with internal
access door for inspection of junction box.
2. LED Module Extruded Aluminum clear anodized
heat sink with thermal interface material efficiently
transfers heat away from LED. Includes strain
relieved low voltage whip with snap interconnector
for quick, tool less assembly of power connection.
Tool-less assembly to trim.
3. Accessory Film (Optional) Available film
accessories: .010 thick Linear spread film has
notch to assist with beam orientation Holder
required; only one film allowed per installation.
4. Accessory Holder (Optional) painted steel.
Accessory holder snaps onto LED Module. Can be
installed before or after trim installation.
5. Mounting springs stainless steel mounting springs
min 0.013” thick provide a universal mounting
solution between the different frame offerings.
6. Reflector: Aluminum Reflector Cone.
7. Die Cast Aluminum Trim Flange. Chamfered
aperture reduces edge light flash.
8. Horizontal Aim: Light module can be aimed by
rotating flange. Flange can be re-aligned with
room or wall while leaving light module aiming
unchanged.
Note: LED module allows for field replaceable
optics. Order separately.
Ordering guide: Accessories
Series
L3
Type Beam Finish
L3 LyteCaster 3.75"
Accent
AH Accessory holder W White
B Black
LS Linear lens spread film 2
SD 5° soft diffusion film 2
RP Replacement Optic S Spot
NF Narrow flood
F Flood
2. Accessory holder required.
06/10/2019
SILVERSTEIN RESIDENCE PAGE 26 OF 77
BUILDING PERMIT CHANGE ORDER 1
2019.03.15
LS GROUP
TYPE MANUFACTURER MODEL DESCRIPTION NOTES
B1-FL PHILIPS L3-A-E-1
L3-08-90-27-F
L3-S-A-D-W
LYTECASTER 3" ACCENT NEW CONSTRUCTION IC HOUSING.
ELV/TRIAC DIMMING. 120V
LIGHT ENGINE. 800 LUMENS. 90CRI. 2700K. FLOOD, 27DEG
BEAM.
SQUARE TRIM ADJUSTABLE DIFFUSE CONE. WHITE FINISH.
LyteCaster_L3S_Adjustable 11/18 page 3 of 6
L3SAD LyteCaster LED 3" Accent
Square Adjustable
L3AE1 & L3ANE1 new construction in IC AirSeal frame-in kits
Features
1. Housing: #23 ga. (.026") thick
Galvanized steel. cULus listed
for direct contact with thermal
insulation (IC rated). AirSeal
housing minimizes air leakage
to less than 2 CFM at 1.57PSF
(or 75PA), which complies
with Title 24, the International
Energy Conversation Code,
and Washington State Energy
Code (Section 502.4). This
helps to reduce heat loss and
condensation in ceiling. Internal
access door for inspection of
junction box.
2. Lower frame and top cover: #23
ga. (026") thick Galvanized steel.
Accommodates ceilings up to 1"
(25.4 mm) thick. Bottom cover
provided with a .5" (6.2mm)
lip and 4 embossed indicator
lines to simplify alignment
during installation. Housing
can be locked into position on
the mounting bars with locking
screws.
3. Junction box: 2 ½" (64mm) x 5
3/8" (137mm) x 2" (51mm) #21 ga.
(.032”) thick galvanized steel,
cULus listed 90 degrees C rated
supply conductors. Rated for
branch circuit wiring supplying
connected luminaires (daisy
chaining).
4. Mounting bars: #16 ga. (.059")
thick galvanized steel. Bars pivot
for easy attachment and wire in
from below the ceiling line. Bars
can extend to accommodate
16" (406mm) to 24" (610mm)
O.C. joist spacing. Bars can
accommodate 12" (305mm) O.C.
joist spacing after slight field
modification (see instruction
sheet). Features integral self-
tapping screw phillips/square
drive for attachment to wood
or metal construction. Also
available with integral nails
(N). Attaches to T-bar ceilings
without accessories. Bars
installed on shortest dimension
of frame can be easily rotated
90° from original position.
5. Electronic dimming driver:
Class 2 electronic LED Driver,
with less than 1 second start up,
RoHS compliant, suitable for
damp locations. 120v 50/06Hz
>.9 power factor. Sound rating
Class “A” (<24dB). Complies with
FCC,CFR title 47 part 15 Class
B for EMI/RFI. Dimmable with
standard electronic low voltage
(ELV) & Triac dimmers. Dims
to less than or equal to 10%
of relative high output. 5 year
limited warranty.
6. Ceiling cutout: 3 ¾" diameter.
Electrical
Input voltage 120v, Input freq.: 50/60
hZ, Input current .25 amps, Input
Power 12 W, Power factor >.9
Warranty
5 year limited warranty.
(visit philips.com/warranties
for details)
Labels
cULus type IC listed suitable for
damp location. AirSeal.
This product complies with the
requirements of the California
Energy Commission regulated
under Title 24, and has been listed
in the Title 20 database.
Energy Star
Product family has Energy
Star certification with the following
exceptions:
• All 90 CRI options
• All 2700 CRI options
Title 24
Product family has Title 24
certification with the following
exception:
• All 80 CRI options
13" Min. (330mm)
24" Max. (610mm)7 31/32"
(202mm)
7 31/32" (202mm)
2 19/32" (66mm)
4 5/8" (118mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
5/32" (4mm)
5/32" (4mm)
5/32" (4mm)
64° Cutoff
4 5/8" (118mm)
5/32" (4mm)
58° Cutoff
58° Cutoff
8 1/4" (210mm)
11 5/8" (296mm)
5 3/8"
(136mm)
11 31/32" (304mm)
13 7/16" (342mm)
3 7/16" (88mm)
64° Cutoff
3 7/16" (88mm)
3 1/8"
(80mm)4 1/2"
(115mm)
4 1/2"
(114mm)
4 1/2"
(114mm)
2 1/16" (52mm)
2 1/16" (52mm)
3 3/4"
(52mm)
Frame
LED Module
Accessory lm
(optional)
Accessory holder
(optional)
Flange
Reector
Mounting
springs
13" Min. (330mm)
24" Max. (610mm)7 31/32"
(202mm)
7 31/32" (202mm)
2 19/32" (66mm)
8 1/4" (210mm)
11 5/8" (296mm)
5 3/8"
(136mm)
11 31/32" (304mm)
13 7/16" (342mm)
Frame
LED Module
Accessory lm
(optional)
Accessory holder
(optional)
Flange
Reector
Mounting
springs
3 5/32" (80mm)
2 1/32" (52mm)
2 1/8" (54mm)
4 1/2" (115mm)
3 5/32" (80mm)
2 1/32" (52mm)
4 1/2" (115mm)
2 5/32" (55mm)
2 1/32" (52mm)
4 1/2" (115mm)
2 11/16" (68mm)
2" (51mm)
4 1/2" (115mm)
2 11/16" (68mm)
2 1/32" (52mm)
4 1/2" (115mm)
1 3/4" (45mm)
2 1/32" (52mm)
4 1/2" (115mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
0-1"
(0-25mm)
Maximum
ceiling thickness
5/32" (4mm)
5/32" (4mm)
3 7/16" (88mm)
3 7/16" (88mm)
0-1/2"
(0-13mm)
Maximum
ceiling thickness
0-1"
(0-25mm)
Maximum
ceiling thickness
0-1"
(0-25mm)
Maximum
ceiling thickness
4 5/8" (118mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
5/32" (4mm)
5/32" (4mm)
5/32" (4mm)
3 7/16" (88mm)
3 7/16" (88mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
0-1"
(0-25mm)
Maximum
ceiling thickness
4 5/8" (118mm)
5/32" (4mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
4 5/8" (118mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
0-1"
(0-25mm)
Maximum
ceiling thickness
5/32" (4mm)
11/32" (9mm)
11/32" (9mm)
3 7/16" (88mm)
3 7/16" (88mm)
0-1/2"
(0-13mm)
Maximum
ceiling thickness
1/8" (4mm)
3 7/16" (88mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
4 5/8" (118mm)
5/32" (4mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
35° Tilt
0-1"
(0-25mm)
Maximum
ceiling thickness
5/32" (4mm)
13/32"
(11mm)
13/32"
(11mm)
3 7/16" (88mm)
35° Tilt
4 5/8" (118mm)
5/32" (4mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
30°
Tilit
30°
Tilt
2 1/8" (54mm)
2 1/32" (52mm)
2 1/16" (52mm)
4 1/2" (115mm)
2 1/16" (53mm)
2 1/32" (52mm)
4 1/2" (115mm)
3 5/32" (80mm)
2 1/32" (52mm)
2 1/8" (54mm)
4 1/2" (115mm)
2 1/16" (53mm)
2 1/32" (52mm)
4 1/2" (115mm)
35° Tilt
13" Min. (330mm)
24" Max. (610mm)7 31/32"
(202mm)
7 31/32" (202mm)
2 19/32" (66mm)
4 5/8" (118mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
5/32" (4mm)
5/32" (4mm)
5/32" (4mm)
64° Cutoff
4 5/8" (118mm)
5/32" (4mm)
58° Cutoff
58° Cutoff
8 1/4" (210mm)
11 5/8" (296mm)
5 3/8"
(136mm)
11 31/32" (304mm)
13 7/16" (342mm)
3 7/16" (88mm)
64° Cutoff
3 7/16" (88mm)
3 1/8"
(80mm)4 1/2"
(115mm)
4 1/2"
(114mm)
4 1/2"
(114mm)
2 1/16" (52mm)
2 1/16" (52mm)
3 3/4"
(52mm)
Frame
LED Module
Accessory lm
(optional)
Accessory holder
(optional)
Flange
Reector
Mounting
springs
13" Min. (330mm)
24" Max. (610mm)7 31/32"
(202mm)
7 31/32" (202mm)
2 19/32" (66mm)
8 1/4" (210mm)
11 5/8" (296mm)
5 3/8"
(136mm)
11 31/32" (304mm)
13 7/16" (342mm)
Frame
LED Module
Accessory lm
(optional)
Accessory holder
(optional)
Flange
Reector
Mounting
springs
3 5/32" (80mm)2 1/32" (52mm)2 1/8" (54mm)4 1/2" (115mm)3 5/32" (80mm)2 1/32" (52mm)4 1/2" (115mm)2 5/32" (55mm)2 1/32" (52mm)4 1/2" (115mm)2 11/16" (68mm)2" (51mm)4 1/2" (115mm)
2 11/16" (68mm)
2 1/32" (52mm)
4 1/2" (115mm)
1 3/4" (45mm)2 1/32" (52mm)4 1/2" (115mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
0-1"
(0-25mm)
Maximum
ceiling thickness
5/32" (4mm)
5/32" (4mm)
3 7/16" (88mm)
3 7/16" (88mm)
0-1/2"
(0-13mm)
Maximum
ceiling thickness
0-1"
(0-25mm)
Maximum
ceiling thickness
0-1"
(0-25mm)
Maximum
ceiling thickness
4 5/8" (118mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
5/32" (4mm)
5/32" (4mm)
5/32" (4mm)
3 7/16" (88mm)
3 7/16" (88mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
0-1"
(0-25mm)
Maximum
ceiling thickness
4 5/8" (118mm)
5/32" (4mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
4 5/8" (118mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
0-1"
(0-25mm)
Maximum
ceiling thickness
5/32" (4mm)
11/32" (9mm)
11/32" (9mm)
3 7/16" (88mm)
3 7/16" (88mm)
0-1/2"
(0-13mm)
Maximum
ceiling thickness
1/8" (4mm)
3 7/16" (88mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
4 5/8" (118mm)
5/32" (4mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
35° Tilt
0-1"
(0-25mm)
Maximum
ceiling thickness
5/32" (4mm)
13/32"
(11mm)
13/32"
(11mm)
3 7/16" (88mm)
35° Tilt
4 5/8" (118mm)
5/32" (4mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
30°
Tilit
30°
Tilt
2 1/8" (54mm)
2 1/32" (52mm)
2 1/16" (52mm)
4 1/2" (115mm)
2 1/16" (53mm)
2 1/32" (52mm)
4 1/2" (115mm)
3 5/32" (80mm)2 1/32" (52mm)2 1/8" (54mm)4 1/2" (115mm)
2 1/16" (53mm)
2 1/32" (52mm)
4 1/2" (115mm)
35° Tilt
13" Min. (330mm)
24" Max. (610mm)7 31/32"
(202mm)
7 31/32" (202mm)
2 19/32" (66mm)
4 5/8" (118mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
5/32" (4mm)
5/32" (4mm)
5/32" (4mm)
64° Cutoff
4 5/8" (118mm)
5/32" (4mm)
58° Cutoff
58° Cutoff
8 1/4" (210mm)
11 5/8" (296mm)
5 3/8"
(136mm)
11 31/32" (304mm)
13 7/16" (342mm)
3 7/16" (88mm)
64° Cutoff
3 7/16" (88mm)
3 1/8"
(80mm)4 1/2"
(115mm)
4 1/2"
(114mm)
4 1/2"
(114mm)
2 1/16" (52mm)
2 1/16" (52mm)
3 3/4"
(52mm)
Frame
LED Module
Accessory lm
(optional)
Accessory holder
(optional)
Flange
Reector
Mounting
springs
13" Min. (330mm)
24" Max. (610mm)7 31/32"
(202mm)
7 31/32" (202mm)
2 19/32" (66mm)
8 1/4" (210mm)
11 5/8" (296mm)
5 3/8"
(136mm)
11 31/32" (304mm)
13 7/16" (342mm)
Frame
LED Module
Accessory lm
(optional)
Accessory holder
(optional)
Flange
Reector
Mounting
springs
3 5/32" (80mm)
2 1/32" (52mm)
2 1/8" (54mm)
4 1/2" (115mm)
3 5/32" (80mm)
2 1/32" (52mm)
4 1/2" (115mm)
2 5/32" (55mm)
2 1/32" (52mm)
4 1/2" (115mm)
2 11/16" (68mm)
2" (51mm)
4 1/2" (115mm)
2 11/16" (68mm)
2 1/32" (52mm)
4 1/2" (115mm)
1 3/4" (45mm)
2 1/32" (52mm)
4 1/2" (115mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
0-1"
(0-25mm)
Maximum
ceiling thickness
5/32" (4mm)
5/32" (4mm)
3 7/16" (88mm)
3 7/16" (88mm)
0-1/2"
(0-13mm)
Maximum
ceiling thickness
0-1"
(0-25mm)
Maximum
ceiling thickness
0-1"
(0-25mm)
Maximum
ceiling thickness
4 5/8" (118mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
5/32" (4mm)
5/32" (4mm)
5/32" (4mm)
3 7/16" (88mm)
3 7/16" (88mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
0-1"
(0-25mm)
Maximum
ceiling thickness
4 5/8" (118mm)
5/32" (4mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
4 5/8" (118mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
0-1"
(0-25mm)
Maximum
ceiling thickness
5/32" (4mm)
11/32" (9mm)
11/32" (9mm)
3 7/16" (88mm)
3 7/16" (88mm)
0-1/2"
(0-13mm)
Maximum
ceiling thickness
1/8" (4mm)
3 7/16" (88mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
4 5/8" (118mm)
5/32" (4mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
35° Tilt
0-1"
(0-25mm)
Maximum
ceiling thickness
5/32" (4mm)
13/32"
(11mm)
13/32"
(11mm)
3 7/16" (88mm)
35° Tilt
4 5/8" (118mm)
5/32" (4mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
30°
Tilit
30°
Tilt
2 1/8" (54mm)
2 1/32" (52mm)
2 1/16" (52mm)
4 1/2" (115mm)
2 1/16" (53mm)
2 1/32" (52mm)
4 1/2" (115mm)
3 5/32" (80mm)
2 1/32" (52mm)
2 1/8" (54mm)
4 1/2" (115mm)
2 1/16" (53mm)
2 1/32" (52mm)
4 1/2" (115mm)
35° Tilt
Bottom view Side view
Side view
Square trim Light engine
13" Min. (330mm)
24" Max. (610mm)7 31/32"
(202mm)
7 31/32" (202mm)
2 19/32" (66mm)
4 5/8" (118mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
5/32" (4mm)
5/32" (4mm)
5/32" (4mm)
64° Cutoff
4 5/8" (118mm)
5/32" (4mm)
58° Cutoff
58° Cutoff
8 1/4" (210mm)
11 5/8" (296mm)
5 3/8"
(136mm)
11 31/32" (304mm)
13 7/16" (342mm)
3 7/16" (88mm)
64° Cutoff
3 7/16" (88mm)
3 1/8"
(80mm)4 1/2"
(115mm)
4 1/2"
(114mm)
4 1/2"
(114mm)
2 1/16" (52mm)
2 1/16" (52mm)
3 3/4"
(52mm)
Frame
LED Module
Accessory lm
(optional)
Accessory holder
(optional)
Flange
Reector
Mounting
springs
13" Min. (330mm)
24" Max. (610mm)7 31/32"
(202mm)
7 31/32" (202mm)
2 19/32" (66mm)
8 1/4" (210mm)
11 5/8" (296mm)
5 3/8"
(136mm)
11 31/32" (304mm)
13 7/16" (342mm)
Frame
LED Module
Accessory lm
(optional)
Accessory holder
(optional)
Flange
Reector
Mounting
springs
3 5/32" (80mm)2 1/32" (52mm)2 1/8" (54mm)4 1/2" (115mm)3 5/32" (80mm)2 1/32" (52mm)4 1/2" (115mm)2 5/32" (55mm)2 1/32" (52mm)4 1/2" (115mm)2 11/16" (68mm)2" (51mm)4 1/2" (115mm)2 11/16" (68mm)2 1/32" (52mm)4 1/2" (115mm)1 3/4" (45mm)2 1/32" (52mm)4 1/2" (115mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
0-1"
(0-25mm)
Maximum
ceiling thickness
5/32" (4mm)
5/32" (4mm)
3 7/16" (88mm)
3 7/16" (88mm)
0-1/2"
(0-13mm)
Maximum
ceiling thickness
0-1"
(0-25mm)
Maximum
ceiling thickness
0-1"
(0-25mm)
Maximum
ceiling thickness
4 5/8" (118mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
5/32" (4mm)
5/32" (4mm)
5/32" (4mm)
3 7/16" (88mm)
3 7/16" (88mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
0-1"
(0-25mm)
Maximum
ceiling thickness
4 5/8" (118mm)
5/32" (4mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
4 5/8" (118mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
0-1"
(0-25mm)
Maximum
ceiling thickness
5/32" (4mm)
11/32" (9mm)
11/32" (9mm)
3 7/16" (88mm)
3 7/16" (88mm)
0-1/2"
(0-13mm)
Maximum
ceiling thickness
1/8" (4mm)
3 7/16" (88mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
4 5/8" (118mm)
5/32" (4mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
35° Tilt
0-1"
(0-25mm)
Maximum
ceiling thickness
5/32" (4mm)
13/32"
(11mm)
13/32"
(11mm)
3 7/16" (88mm)
35° Tilt
4 5/8" (118mm)
5/32" (4mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
30°
Tilit
30°
Tilt
2 1/8" (54mm)2 1/32" (52mm)2 1/16" (52mm)4 1/2" (115mm)2 1/16" (53mm)2 1/32" (52mm)4 1/2" (115mm)3 5/32" (80mm)2 1/32" (52mm)2 1/8" (54mm)4 1/2" (115mm)2 1/16" (53mm)2 1/32" (52mm)4 1/2" (115mm)
35° Tilt
06/10/2019
SILVERSTEIN RESIDENCE PAGE 27 OF 77
BUILDING PERMIT CHANGE ORDER 1
2019.03.15
LS GROUP
TYPE MANUFACTURER MODEL DESCRIPTION NOTES
B1-SP PHILIPS L3-A-E-1
L3-08-90-27-S
L3-S-A-D-W
LYTECASTER 3" ACCENT NEW CONSTRUCTION IC HOUSING.
ELV/TRIAC DIMMING. 120V
LIGHT ENGINE. 800 LUMENS. 90CRI. 2700K. SPOT, 16DEG
BEAM.
SQUARE TRIM ADJUSTABLE DIFFUSE CONE. WHITE FINISH.
VERIFY ALL TBD
OPTIONS. TRIM
TO BE
COORDINATED
WITH GYP.
CEILING
THICKNESS.
LyteCaster_L3S_Adjustable 11/18 page 1 of 6
Lightolier LyteCaster LED Accent adjustable features a 3.5" luminaire height
that conserves plenum space without compromising the 35° adjustable
tilt. The modular and interchangeable light engine allows for an easy future
upgrade. The accent adjustable is damp location listed and comes in
2 standard finish options.
Project:
Location:
Cat.No:
Type:
Lamps: Qty:
Notes:
Downlighting
LyteCaster LED 3" Accent
L3SAD Square Adjustable
Complete product = Frame-in kit + Light engine + Trim Order each separately
Ordering guide: Square trim Example: L3SAD
Series
L3
Shape
S
Luminaire type
A
Finish
D
Flange
L3 LyteCaster 3"
Accent
S Square A Adjustable D Diffuse cone blank White
A Aluminum
Ordering guide: Frame-In kit Example: L3AE1
Series
L3
Frame type Dimming Input voltage
L3 LyteCaster 3"
Accent
A AirSeal IC, New Construction, Screw
AN AirSeal IC, New Construction, Nail
E ELV/Triac dimming 1 120V
N New Construction Non-IC Z10 0-10V U Universal (120-277V)
Ordering guide: Light engine Example: L308830NF
Series
L3
Lumens
08
CRI CCT Beam Option
L3 LyteCaster 3"
Accent
08 800 8 80 27 2700K
30 3000K
35 3500K
S Spot, 16°
NF Narrow flood, 20°
F Flood, 27°
9 90 27 2700K
30 3000K 1
S Spot, 16°
NF Narrow flood, 20°
F Flood, 27°
CW CrispWhite 1
1. 3000K and CrispWhite must be ordered together
06/10/2019
SILVERSTEIN RESIDENCE PAGE 28 OF 77
BUILDING PERMIT CHANGE ORDER 1
2019.03.15
LS GROUP
TYPE MANUFACTURER MODEL DESCRIPTION NOTES
B3-FL PHILIPS L3-A-E-120
L3-08-90-27-F
L3-S-S-W
LYTECASTER 3" ACCENT NEW CONSTRUCTION IC HOUSING.
ELV/TRIAC DIMMING. 120V
LIGHT ENGINE. 800 LUMENS. 90CRI. 2700K. FLOOD, 41DEG
BEAM.
SQUARE TRIM SHOWER LENS. WHITE FINISH.
VERIFY ALL TBD
OPTIONS. TRIM
TO BE
COORDINATED
WITH GYP.
CEILING
THICKNESS.
LyteCaster_L3S_ShowerLight 11/18 page 1 of 7
Lightolier LyteCaster LED Accent shower light features a 3.5" luminaire height
that conserves plenum space. The modular and interchangeable light engine
allows for an easy future upgrade. The accent shower light is wet location
listed and comes in 2 standard finish options.
Project:
Location:
Cat.No:
Type:
Lamps: Qty:
Notes:
Downlighting
LyteCaster LED 3" Accent
L3SS Square Shower Light
Ordering guide: Square trim Example: L3SSW
Series
L3
Shape
S
Luminaire type
S
Flange
L3 LyteCaster 3"
Accent
S Square S Shower light W White
A Aluminum
Complete product = Frame-in kit + Light engine + Trim Order each separately
Ordering guide: Frame-In kit Example: L3AE1
Series
L3
Frame type Dimming Input voltage
L3 LyteCaster 3"
Accent
A AirSeal IC, New Construction, Screw
AN AirSeal IC, New Construction, Nail
C Remodeler Non-IC
E ELV/Triac dimming 1 120V
N New Construction Non-IC Z10 0-10V U Universal (120-277V)
Ordering guide: Light engine Example: L308830NF
Series
L3
Lumens
08
CRI CCT Beam Option
L3 LyteCaster 3"
Accent
08 800 8 80 27 2700K
30 3000K
35 3500K
S Spot, 31°
NF Narrow flood, 34°
F Flood, 41°
9 90 27 2700K
30 3000K 1
S Spot, 31°
NF Narrow flood, 34°
F Flood, 41°
CW CrispWhite 1
1. 3000K and CrispWhite must be ordered together.
06/10/2019
SILVERSTEIN RESIDENCE PAGE 29 OF 77
BUILDING PERMIT CHANGE ORDER 1
2019.03.15
LS GROUP
TYPE MANUFACTURER MODEL DESCRIPTION NOTES
B3-FL PHILIPS L3-A-E-120
L3-08-90-27-F
L3-S-S-W
LYTECASTER 3" ACCENT NEW CONSTRUCTION IC HOUSING.
ELV/TRIAC DIMMING. 120V
LIGHT ENGINE. 800 LUMENS. 90CRI. 2700K. FLOOD, 41DEG
BEAM.
SQUARE TRIM SHOWER LENS. WHITE FINISH.
VERIFY ALL TBD
OPTIONS. TRIM
TO BE
COORDINATED
WITH GYP.
CEILING
THICKNESS.
LyteCaster_L3S_ShowerLight 11/18 page 2 of 7
L3SS LyteCaster LED 3" Accent
Square Shower Light
Frame
LED Module
Flange
Mounting
springs
Diused Lens
Assembled configuration:
1. Frame Galvanized steel construction with internal
access door for inspection of junction box.
2. LED Module Extruded Aluminum clear anodized
finish heat sink with thermal interface material
efficiently transfers heat away from LED. Includes
strain relieved low voltage whip with snap
interconnector for quick, tool less assembly of
power connection. Tool-less assembly to trim.
3. LED Module can be installed before or after
trim installation.
4. Mounting springs stainless steel mounting springs
min 0.013” thick provide a universal mounting
solution between the different frame offerings
5. Reflector: Aluminum Reflector Cone.
6. Die Cast Aluminum Trim Flange.
7. Diffused Lens: Frosted Glass
Note: LED module allows for field replaceable
optics. Order separately.
06/10/2019
SILVERSTEIN RESIDENCE PAGE 30 OF 77
BUILDING PERMIT CHANGE ORDER 1
2019.03.15
LS GROUP
TYPE MANUFACTURER MODEL DESCRIPTION NOTES
B3-FL PHILIPS L3-A-E-120
L3-08-90-27-F
L3-S-S-W
LYTECASTER 3" ACCENT NEW CONSTRUCTION IC HOUSING.
ELV/TRIAC DIMMING. 120V
LIGHT ENGINE. 800 LUMENS. 90CRI. 2700K. FLOOD, 41DEG
BEAM.
SQUARE TRIM SHOWER LENS. WHITE FINISH.
VERIFY ALL TBD
OPTIONS. TRIM
TO BE
COORDINATED
WITH GYP.
CEILING
THICKNESS.
LyteCaster_L3S_ShowerLight 11/18 page 3 of 7
L3SS LyteCaster LED 3" Accent
Square Shower Light
L3AE1 & L3ANE1 new construction in IC AirSeal frame-in kits
Features
1. Housing: #23 ga. (.026") thick
Galvanized steel. cULus listed
for direct contact with thermal
insulation (IC rated). AirSeal
housing minimizes air leakage
to less than 2 CFM at 1.57PSF
(or 75PA), which complies
with Title 24, the International
Energy Conversation Code,
and Washington State Energy
Code (Section 502.4). This
helps to reduce heat loss and
condensation in ceiling. Internal
access door for inspection of
junction box.
2. Lower frame and top cover: #23
ga. (026") thick Galvanized steel.
Accommodates ceilings up to 1"
(25.4 mm) thick. Bottom cover
provided with a .5" (6.2mm)
lip and 4 embossed indicator
lines to simplify alignment
during installation. Housing
can be locked into position on
the mounting bars with locking
screws.
3. Junction box: 2 ½" (64mm) x 5
3/8" (137mm) x 2" (51mm) #21 ga.
(.032”) thick galvanized steel,
cULus listed 90 degrees C rated
supply conductors. Rated for
branch circuit wiring supplying
connected luminaires (daisy
chaining).
4. Mounting bars: #16 ga. (.059")
thick galvanized steel. Bars pivot
for easy attachment and wire in
from below the ceiling line. Bars
can extend to accommodate
16" (406mm) to 24" (610mm)
O.C. joist spacing. Bars can
accommodate 12" (305mm) O.C.
joist spacing after slight field
modification (see instruction
sheet). Features integral self-
tapping screw phillips/square
drive for attachment to wood
or metal construction. Also
available with integral nails
(N). Attaches to T-bar ceilings
without accessories. Bars
installed on shortest dimension
of frame can be easily rotated
90° from original position.
5. Electronic dimming driver:
Class 2 electronic LED Driver,
with less than 1 second start up,
RoHS compliant, suitable for
damp locations. 120v 50/06Hz
>.9 power factor. Sound rating
Class “A” (<24dB). Complies with
FCC,CFR title 47 part 15 Class
B for EMI/RFI. Dimmable with
standard electronic low voltage
(ELV) & Triac dimmers. Dims
to less than or equal to 10%
of relative high output. 5 year
limited warranty.
6. Ceiling cutout: 3 ¾" diameter.
Electrical
Input voltage 120v, Input freq.: 50/60
hZ, Input current .25 amps, Input
Power 12W, Power factor >.9
Warranty
5 year limited warranty.
(visit philips.com/warranties
for details)
Labels
cULus type IC listed suitable for
wet location. AirSeal.
13" Min. (330mm)
24" Max. (610mm)7 31/32"
(202mm)
7 31/32" (202mm)
2 19/32" (66mm)
4 5/8" (118mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
5/32" (4mm)
5/32" (4mm)
5/32" (4mm)
64° Cutoff
4 5/8" (118mm)
5/32" (4mm)
58° Cutoff
58° Cutoff
8 1/4" (210mm)
11 5/8" (296mm)
5 3/8"
(136mm)
11 31/32" (304mm)
13 7/16" (342mm)
3 7/16" (88mm)
64° Cutoff
3 7/16" (88mm)
3 1/8"
(80mm)4 1/2"
(115mm)
4 1/2"
(114mm)
4 1/2"
(114mm)
2 1/16" (52mm)
2 1/16" (52mm)
3 3/4"
(52mm)
Frame
LED Module
Accessory lm
(optional)
Accessory holder
(optional)
Flange
Reector
Mounting
springs
13" Min. (330mm)
24" Max. (610mm)7 31/32"
(202mm)
7 31/32" (202mm)
2 19/32" (66mm)
8 1/4" (210mm)
11 5/8" (296mm)
5 3/8"
(136mm)
11 31/32" (304mm)
13 7/16" (342mm)
Frame
LED Module
Accessory lm
(optional)
Accessory holder
(optional)
Flange
Reector
Mounting
springs
3 5/32" (80mm)2 1/32" (52mm)2 1/8" (54mm)4 1/2" (115mm)3 5/32" (80mm)2 1/32" (52mm)4 1/2" (115mm)2 5/32" (55mm)2 1/32" (52mm)4 1/2" (115mm)2 11/16" (68mm)2" (51mm)4 1/2" (115mm)2 11/16" (68mm)2 1/32" (52mm)4 1/2" (115mm)1 3/4" (45mm)2 1/32" (52mm)4 1/2" (115mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
0-1"
(0-25mm)
Maximum
ceiling thickness
5/32" (4mm)
5/32" (4mm)
3 7/16" (88mm)
3 7/16" (88mm)
0-1/2"
(0-13mm)
Maximum
ceiling thickness
0-1"
(0-25mm)
Maximum
ceiling thickness
0-1"
(0-25mm)
Maximum
ceiling thickness
4 5/8" (118mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
5/32" (4mm)
5/32" (4mm)
5/32" (4mm)
3 7/16" (88mm)
3 7/16" (88mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
0-1"
(0-25mm)
Maximum
ceiling thickness
4 5/8" (118mm)
5/32" (4mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
4 5/8" (118mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
0-1"
(0-25mm)
Maximum
ceiling thickness
5/32" (4mm)
11/32" (9mm)
11/32" (9mm)
3 7/16" (88mm)
3 7/16" (88mm)
0-1/2"
(0-13mm)
Maximum
ceiling thickness
1/8" (4mm)
3 7/16" (88mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
4 5/8" (118mm)
5/32" (4mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
35° Tilt
0-1"
(0-25mm)
Maximum
ceiling thickness
5/32" (4mm)
13/32"
(11mm)
13/32"
(11mm)
3 7/16" (88mm)
35° Tilt
4 5/8" (118mm)
5/32" (4mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
30°
Tilit
30°
Tilt
2 1/8" (54mm)2 1/32" (52mm)2 1/16" (52mm)4 1/2" (115mm)2 1/16" (53mm)2 1/32" (52mm)4 1/2" (115mm)3 5/32" (80mm)2 1/32" (52mm)2 1/8" (54mm)4 1/2" (115mm)2 1/16" (53mm)2 1/32" (52mm)4 1/2" (115mm)
35° Tilt
13" Min. (330mm)
24" Max. (610mm)7 31/32"
(202mm)
7 31/32" (202mm)
2 19/32" (66mm)
4 5/8" (118mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
5/32" (4mm)
5/32" (4mm)
5/32" (4mm)
64° Cutoff
4 5/8" (118mm)
5/32" (4mm)
58° Cutoff
58° Cutoff
8 1/4" (210mm)
11 5/8" (296mm)
5 3/8"
(136mm)
11 31/32" (304mm)
13 7/16" (342mm)
3 7/16" (88mm)
64° Cutoff
3 7/16" (88mm)
3 1/8"
(80mm)4 1/2"
(115mm)
4 1/2"
(114mm)
4 1/2"
(114mm)
2 1/16" (52mm)
2 1/16" (52mm)
3 3/4"
(52mm)
Frame
LED Module
Accessory lm
(optional)
Accessory holder
(optional)
Flange
Reector
Mounting
springs
13" Min. (330mm)
24" Max. (610mm)7 31/32"
(202mm)
7 31/32" (202mm)
2 19/32" (66mm)
8 1/4" (210mm)
11 5/8" (296mm)
5 3/8"
(136mm)
11 31/32" (304mm)
13 7/16" (342mm)
Frame
LED Module
Accessory lm
(optional)
Accessory holder
(optional)
Flange
Reector
Mounting
springs
3 5/32" (80mm)
2 1/32" (52mm)
2 1/8" (54mm)
4 1/2" (115mm)
3 5/32" (80mm)
2 1/32" (52mm)
4 1/2" (115mm)
2 5/32" (55mm)
2 1/32" (52mm)
4 1/2" (115mm)
2 11/16" (68mm)
2" (51mm)
4 1/2" (115mm)
2 11/16" (68mm)
2 1/32" (52mm)
4 1/2" (115mm)
1 3/4" (45mm)
2 1/32" (52mm)
4 1/2" (115mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
0-1"
(0-25mm)
Maximum
ceiling thickness
5/32" (4mm)
5/32" (4mm)
3 7/16" (88mm)
3 7/16" (88mm)
0-1/2"
(0-13mm)
Maximum
ceiling thickness
0-1"
(0-25mm)
Maximum
ceiling thickness
0-1"
(0-25mm)
Maximum
ceiling thickness
4 5/8" (118mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
5/32" (4mm)
5/32" (4mm)
5/32" (4mm)
3 7/16" (88mm)
3 7/16" (88mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
0-1"
(0-25mm)
Maximum
ceiling thickness
4 5/8" (118mm)
5/32" (4mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
4 5/8" (118mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
0-1"
(0-25mm)
Maximum
ceiling thickness
5/32" (4mm)
11/32" (9mm)
11/32" (9mm)
3 7/16" (88mm)
3 7/16" (88mm)
0-1/2"
(0-13mm)
Maximum
ceiling thickness
1/8" (4mm)
3 7/16" (88mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
4 5/8" (118mm)
5/32" (4mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
35° Tilt
0-1"
(0-25mm)
Maximum
ceiling thickness
5/32" (4mm)
13/32"
(11mm)
13/32"
(11mm)
3 7/16" (88mm)
35° Tilt
4 5/8" (118mm)
5/32" (4mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
30°
Tilit
30°
Tilt
2 1/8" (54mm)
2 1/32" (52mm)
2 1/16" (52mm)
4 1/2" (115mm)
2 1/16" (53mm)
2 1/32" (52mm)
4 1/2" (115mm)
3 5/32" (80mm)
2 1/32" (52mm)
2 1/8" (54mm)
4 1/2" (115mm)
2 1/16" (53mm)
2 1/32" (52mm)
4 1/2" (115mm)
35° Tilt
13" Min. (330mm)
24" Max. (610mm)7 31/32"
(202mm)
7 31/32" (202mm)
2 19/32" (66mm)
4 5/8" (118mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
5/32" (4mm)
5/32" (4mm)
5/32" (4mm)
64° Cutoff
4 5/8" (118mm)
5/32" (4mm)
58° Cutoff
58° Cutoff
8 1/4" (210mm)
11 5/8" (296mm)
5 3/8"
(136mm)
11 31/32" (304mm)
13 7/16" (342mm)
3 7/16" (88mm)
64° Cutoff
3 7/16" (88mm)
3 1/8"
(80mm)4 1/2"
(115mm)
4 1/2"
(114mm)
4 1/2"
(114mm)
2 1/16" (52mm)
2 1/16" (52mm)
3 3/4"
(52mm)
Frame
LED Module
Accessory lm
(optional)
Accessory holder
(optional)
Flange
Reector
Mounting
springs
13" Min. (330mm)
24" Max. (610mm)7 31/32"
(202mm)
7 31/32" (202mm)
2 19/32" (66mm)
8 1/4" (210mm)
11 5/8" (296mm)
5 3/8"
(136mm)
11 31/32" (304mm)
13 7/16" (342mm)
Frame
LED Module
Accessory lm
(optional)
Accessory holder
(optional)
Flange
Reector
Mounting
springs
3 5/32" (80mm)2 1/32" (52mm)2 1/8" (54mm)4 1/2" (115mm)3 5/32" (80mm)2 1/32" (52mm)4 1/2" (115mm)2 5/32" (55mm)2 1/32" (52mm)4 1/2" (115mm)2 11/16" (68mm)2" (51mm)4 1/2" (115mm)
2 11/16" (68mm)
2 1/32" (52mm)
4 1/2" (115mm)
1 3/4" (45mm)2 1/32" (52mm)4 1/2" (115mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
0-1"
(0-25mm)
Maximum
ceiling thickness
5/32" (4mm)
5/32" (4mm)
3 7/16" (88mm)
3 7/16" (88mm)
0-1/2"
(0-13mm)
Maximum
ceiling thickness
0-1"
(0-25mm)
Maximum
ceiling thickness
0-1"
(0-25mm)
Maximum
ceiling thickness
4 5/8" (118mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
5/32" (4mm)
5/32" (4mm)
5/32" (4mm)
3 7/16" (88mm)
3 7/16" (88mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
0-1"
(0-25mm)
Maximum
ceiling thickness
4 5/8" (118mm)
5/32" (4mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
4 5/8" (118mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
0-1"
(0-25mm)
Maximum
ceiling thickness
5/32" (4mm)
11/32" (9mm)
11/32" (9mm)
3 7/16" (88mm)
3 7/16" (88mm)
0-1/2"
(0-13mm)
Maximum
ceiling thickness
1/8" (4mm)
3 7/16" (88mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
4 5/8" (118mm)
5/32" (4mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
35° Tilt
0-1"
(0-25mm)
Maximum
ceiling thickness
5/32" (4mm)
13/32"
(11mm)
13/32"
(11mm)
3 7/16" (88mm)
35° Tilt
4 5/8" (118mm)
5/32" (4mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
30°
Tilit
30°
Tilt
2 1/8" (54mm)
2 1/32" (52mm)
2 1/16" (52mm)
4 1/2" (115mm)
2 1/16" (53mm)
2 1/32" (52mm)
4 1/2" (115mm)
3 5/32" (80mm)2 1/32" (52mm)2 1/8" (54mm)4 1/2" (115mm)
2 1/16" (53mm)
2 1/32" (52mm)
4 1/2" (115mm)
35° Tilt
13" Min. (330mm)
24" Max. (610mm)7 31/32"
(202mm)
7 31/32" (202mm)
2 19/32" (66mm)
4 5/8" (118mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
5/32" (4mm)
5/32" (4mm)
5/32" (4mm)
64° Cutoff
4 5/8" (118mm)
5/32" (4mm)
58° Cutoff
58° Cutoff
8 1/4" (210mm)
11 5/8" (296mm)
5 3/8"
(136mm)
11 31/32" (304mm)
13 7/16" (342mm)
3 7/16" (88mm)
64° Cutoff
3 7/16" (88mm)
3 1/8"
(80mm)4 1/2"
(115mm)
4 1/2"
(114mm)
4 1/2"
(114mm)
2 1/16" (52mm)
2 1/16" (52mm)
3 3/4"
(52mm)
Frame
LED Module
Accessory lm
(optional)
Accessory holder
(optional)
Flange
Reector
Mounting
springs
13" Min. (330mm)
24" Max. (610mm)7 31/32"
(202mm)
7 31/32" (202mm)
2 19/32" (66mm)
8 1/4" (210mm)
11 5/8" (296mm)
5 3/8"
(136mm)
11 31/32" (304mm)
13 7/16" (342mm)
Frame
LED Module
Accessory lm
(optional)
Accessory holder
(optional)
Flange
Reector
Mounting
springs
3 5/32" (80mm)
2 1/32" (52mm)
2 1/8" (54mm)
4 1/2" (115mm)
3 5/32" (80mm)
2 1/32" (52mm)
4 1/2" (115mm)
2 5/32" (55mm)
2 1/32" (52mm)
4 1/2" (115mm)
2 11/16" (68mm)
2" (51mm)
4 1/2" (115mm)
2 11/16" (68mm)
2 1/32" (52mm)
4 1/2" (115mm)
1 3/4" (45mm)
2 1/32" (52mm)
4 1/2" (115mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
0-1"
(0-25mm)
Maximum
ceiling thickness
5/32" (4mm)
5/32" (4mm)
3 7/16" (88mm)
3 7/16" (88mm)
0-1/2"
(0-13mm)
Maximum
ceiling thickness
0-1"
(0-25mm)
Maximum
ceiling thickness
0-1"
(0-25mm)
Maximum
ceiling thickness
4 5/8" (118mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
5/32" (4mm)
5/32" (4mm)
5/32" (4mm)
3 7/16" (88mm)
3 7/16" (88mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
0-1"
(0-25mm)
Maximum
ceiling thickness
4 5/8" (118mm)
5/32" (4mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
4 5/8" (118mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
0-1"
(0-25mm)
Maximum
ceiling thickness
5/32" (4mm)
11/32" (9mm)
11/32" (9mm)
3 7/16" (88mm)
3 7/16" (88mm)
0-1/2"
(0-13mm)
Maximum
ceiling thickness
1/8" (4mm)
3 7/16" (88mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
4 5/8" (118mm)
5/32" (4mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
35° Tilt
0-1"
(0-25mm)
Maximum
ceiling thickness
5/32" (4mm)
13/32"
(11mm)
13/32"
(11mm)
3 7/16" (88mm)
35° Tilt
4 5/8" (118mm)
5/32" (4mm)
0-1"
(0-25mm)
Maximum
ceiling thickness
30°
Tilit
30°
Tilt
2 1/8" (54mm)
2 1/32" (52mm)
2 1/16" (52mm)
4 1/2" (115mm)
2 1/16" (53mm)
2 1/32" (52mm)
4 1/2" (115mm)
3 5/32" (80mm)
2 1/32" (52mm)
2 1/8" (54mm)
4 1/2" (115mm)
2 1/16" (53mm)
2 1/32" (52mm)
4 1/2" (115mm)
35° Tilt
Bottom view Side view
Side view
Square trim Light engine
06/10/2019
SILVERSTEIN RESIDENCE PAGE 62 OF 77
BUILDING PERMIT CHANGE ORDER 1
2019.03.15
LS GROUP
TYPE MANUFACTURER MODEL DESCRIPTION NOTES
X02 BEACHSIDE
LIGHTING
E3-M-1-3W-SP-*- 3W IN-GRADE DIRECTIONAL LED MARKER LIGHT, SINGLE
SECTOR, 90 DEGREE, 2700K, BRASS FINISH, ELV, REAR
CONDUIT ENTRY.
E3-M
01/2019
Project By Date
For ordering purposes, please specify (example: E3-M-2―2W-MR11-SP—DM)
BEACHSIDE LIGHTING 800-405-6732 www.BeachsideLighting.com●●
Fixture Accessory
E3-M-
Lamp / Beam
Lamps
12 Volts AC. Remote transformer required.
Frosted, cylindrical, borosilicate glass helps to diffuse light
evenly. Tempered soda lime glass seals lamp compart-
ment below.
Solid brass trim with brass cylindrical lamp compartment.
PVC outer housing with brass splice box.Construction
Lens
Voltage
Mounting
The E3-M is a small marker fixture with a minimal 2.125” (54mm) footprint. Fix-
ture can be used in masonry or wood applications.
Finish: Unfinished is standard; no specification required. The fixture will
weather to a natural patina. The patina process is natural with brass and copper.
Rate of patina and eventual color is dependent upon climate and proximity to
the ocean. Thus, Beachside does not guarantee any specific appearance.
__ 2W-A-SP 10° spot2 Watt Amber (1500K)Cree XPE2 LED moduleTURTLE FRIENDLY
__ 3W-SP 10° spot3 WattCree XPG2 LED module
Warm White (3000K)*
Also available in other color temperatures. Add color suffix to lamp specification,
e.g. 3W-SP-2700K*
__ 2W-A-MR11-SP 15° spot2 Watt Amber (1500K)MR11 LED Cree chipsetTURTLE FRIENDLY
__ 2W-MR11-SP 15° spot2 WattMR11 LED Cree chipsetWarm White (3000K)
Ground or wall-mount installation, in wood or masonry, for
indoor or outdoor applications. No mounting accessory is
needed for core drill applications. Optional Deck Mount
accessory allows for adaptation to wood deck of varying
thicknesses. Optional brass Conduit Fitting features two
side and one bottom 1/2” NPT threaded holes for remote
splicing and/or applications with limited depth. Concrete
Form Kit secures the fixture Housing vertically or horizon-
tally in a form for installation in new concrete. Trim and
lamp compartment are friction-fit into sleeve using o-rings,
eliminating the need for visible fasteners.
Mounting
Accessories __ CF
__ CFK
__ DM
Conduit Fitting (Limited Depth/Remote Splice)
Concrete Form Kit
Deck Mount adapter ring for wooden decks
IP 67CSA Listed, file #19003010 year fixture warranty5 year LED module warranty3 year MR11 LED lamp warrantyDrive-over static load rating: 8400 - 12000 lbs MADE IN USA
Triac dimmable >25%
(None needed for Core Drill Applications)
Triac dimmable: MLV >6% typ., ELV >16% typ.
E3-M FOUR-SECTORILLUMINATION
(STANDARD)
SINGLESECTOR
TWO
SECTOR
TWO SECTOR
OPPOSITE
E3-M-1
E3-M-2
E3-M-OP
WOOD
DECKING
OPTIONAL
DECK MOUNT (DM)
Ø3.0"
[7.6cm]
0.77"
[1.9cm]0.14" [0.4cm]
3.14" [8.0cm]
0.6" [1.6cm]
4.5" [11.4cm]
Ø1.9" [4.8cm]
SHOWN WITH OPTIONAL
BRASS CONDUIT FITTING (CF)
SHOWN WITH OPTIONAL
CONCRETE FORM KIT (CFK)
5.0"
[12.7cm]
Fixture can be stabilized using conduit &
fittings or a pipe nipple attached to a plateon the ground and threaded into the bottom
hole of the CF or the PVC Cap in the CFK.
Ø2.125" [5.4cm]
06/10/2019
SILVERSTEIN RESIDENCE PAGE 68 OF 77
BUILDING PERMIT CHANGE ORDER 1
2019.03.15
LS GROUP
TYPE MANUFACTURER MODEL DESCRIPTION NOTES
X05 Q-TRAN iQ67-27-28-90-4.4-** 4.4W/FT WET RATED FLEXIBLE TAPE LIGHT. 2700K. 90 CRI.
LENGTH TBD.
LENGTH TO BE
COORDINATED
IN FIELD.
REMOTE DRIVER
REQUIRED
06/10/2019
Exterior linear lighting
is not allowed. This
light fixture type is not
approved.
SILVERSTEIN RESIDENCE PAGE 69 OF 77
BUILDING PERMIT CHANGE ORDER 1
2019.03.15
LS GROUP
TYPE MANUFACTURER MODEL DESCRIPTION NOTES
X06 FOCUS
INDUSTRIES
BQCD02L134SS Stainless steel deck mounted LED barbeque light, 7W Par16 LED,
120V medium base socket, high impact clear tempered glass lens,
on/off push button switch.
®
TYPE
071918BQ-CD02 Cut Sheet
COMMERCIAL BARBECUE LIGHT
BQ-CD02 COMMERCIAL SERIES
JOB INFORMATION
Type: Date:
Job Name:
Cat. No.:
Lamp(s):
Specifier:
Contractor:
Notes:
FOCUS INDUSTRIES INC. www.focusindustries.com25301 COMMERCENTRE DRIVE sales@focusindustries.comLAKE FOREST, CA 92630 (949) 830-1350 • FAX (949) 830-3390
SPECIFICATIONS
CONSTRUCTION: 316 stainless steel housing
ARM: 24" tall 316 stainless steel ridged stem and 335Ø x 90Ø rotating swivel
MOUNT: 316 stainless steel deck mount canopy
FINISH: Stainless Steel – Brushed
LENS: High impact clear tempered flat glass
O-RING: High temperature red silicone, 70 durometer
SWITCH: On/Off push button with weatherproof rubber boot cover
12v ELECTRICAL SPECIFICATIONS:
LED SUPPLIED: 7w MR16 GU5.3 Super Saver (L-48)
40,000 hours average rating
SOCKET: High temperature ceramic GU5.3 bi-pin,
250°C silicone insolated lead wires
WIRING: Black 10 foot 18/2 zip cord from base of fixture (12v only)
For 25 foot 16/2 wire add-25F to catalog number
120v ELECTRICAL SPECIFICATIONS:
LED SUPPLIED: 7w ARROW PAR16 (L-134)
40,000 hours average rating
SOCKET: High temperature ceramic Base (E26/27) medium base,
250°C silicone insolated lead wires
WIRING: Standard Three Wire 16" lead wires from base of fixture
ORDERING INFORMATION
CATALOG NO. DESCRIPTION LAMP SHIP WEIGHT
12v
BQCD02L48SS Commercial Deck Mount 7w MR16 LED SS 7.0 lbs.
BQ Light
120v
BQCD02L134SS Commercial Deck Mount 7w PAR16 LED SS 7.0 lbs.
BQ Light
IP66
7"
178mm
24”
607mm
24”
607mm
5.5”140
m
m
5.5
”140
m
m
3.50”
89m
06/10/2019