The URL can be used to link to this page

Home My WebLink AboutFile Documents.805 Roaring Fork Rd.0019.2018 (6).ARBK 1 HealthSafe Inspections Inc 390 Apple Drive Basalt CO 81621 970-920-2100 Jim Baker CDPHE Asbestos Building Inspector Certification #13437 CDPHE Lead-Based Paint Inspector Certification #23607 ASBESTOS REPORT DATE: 06/30/2017 CLIENT: Charlie Moss c/o Sarah Oates 533 E Hopkins Ave, Suite 201 Aspen CO 81611 PROJECT PROPERTY ADDRESS: 805 Roaring Fork Road, Aspen, Colorado 81611 01/22/2018 2 COLORADO ASBESTOS REGULATIONS SUMMARY: Colorado State Regulation 8 requires a State-certified Asbestos Building Inspector to inspect and sample for suspect asbestos containing materials (ACM) or suspect asbestos containing building materials (ACBM) prior to the disturbance, removal or demolition. In residential buildings of four or fewer units if more than 32 square feet of any surface coverage (e.g., gypsum wallboard or drywall and associated applied surfacing materials/textures, acoustic sprays, joint compounds, plaster, etc.), 50 feet of asbestos covered or asbestos insulated pipe or any material which would fill a 55-gallon drum—if these materials are going to be disturbed or removed—an asbestos inspection is required by a state certified asbestos building inspector. For buildings with more than four residential units (considered public), including commercial, public (including public access areas to a residential building), civic or industrial buildings, if more than 160 square feet of surfacing materials, 260 linear feet or more than 35 cubic feet of suspect ACM/ACBM is going to be disturbed, an asbestos inspection is required under NESHAP. County or City regulations may be more stringent. The regulations require an absolute 01/22/2018 3 minimum of 3 samples (EPA suggests 9) per homogenous suspect surfacing and TSI materials and an absolute minimum of 1 sample of homogenous miscellaneous materials or any number of “samples sufficient to determine whether a material is ACM” (Reg8.IV.D.3). More samples are required based on surface area or volume. For the contractor to proceed with disturbance, demolition, restoration or remodel/renovation the suspect materials have to be sampled and analyzed by a NVLAP accredited laboratory by polarized light microscopy (PLM) methods. OSHA compliance is required for all employers/employees no matter the quantity of asbestos present. CLIENT BACKGROUND: Charlie Moss through Sarah Oates hired HealthSafe Inspections, Inc. (hereinafter, HealthSafe) to perform an asbestos building inspection, bulk sampling and report for the single-family residence interior only. The Client, Charlie Moss, is under contract to purchase the above addressed property and requested that an asbestos inspection be performed for the interior suspect materials. This report is limited to the house and garage interiors. VISUAL INSPECTION & LABORATORY FINDINGS: An inspection was conducted by Jim Baker of HealthSafe on Tuesday evening, June 27, 2017 with Tommy Nims, the seller’s real estate representative, present during the inspection. Suspect ACM/ACBM (drywall materials and sheet vinyl flooring only) were identified and sampled. Those materials are the following: 1. A sheet vinyl flooring material in the storage room and garage laundry room, a homogeneous miscellaneous material requiring at least one sample [sample 1]. The PLM analytical estimated results: NONE DETECTED. 2. A homogeneous taped and joint compounded drywall system (classified as a miscellaneous material as a complete integral system) [samples 2-3]. These composite layered taped and joint compounded drywall materials are on ceilings and walls of the house interior two floors with a surfacing material/texture known as “flat-finish“. The estimated surface area is more than 5,000 sf, requiring a minimum of at least two composite core samples of all drywall layers (“…number of samples sufficient to determine” …if asbestos is present or not). One was taken from the ground floor inside a closet and the second one from a master closet on the second floor. The PLM analytical estimated results: NONE DETECTED. 3. A homogeneous trowel-applied flat-finish surfacing material/texture [samples 4- 10]. This surfacing material/texture is on ceilings and walls of the two floors of the house interior and some garage walls. The estimated surface area is more than 5,000 sf, requiring a minimum of at least seven surfacing/texture material samples. The PLM analytical estimated results: NONE DETECTED. 4. A homogeneous taped and joint compounded drywall system (classified as a miscellaneous material as a complete integral system) [sample 11]; these composite layered taped and joint compounded drywall materials are in the 01/22/2018 4 garage mechanical room and ceiling with a surfacing material/texture known as “knock-down“ in the ceiling of the garage and laundry room. The estimated surface area is more than 32 sf, but less than 1,000 sf, requiring a minimum of at least a single composite core sample of all drywall layers (“…number of samples sufficient to determine” …if asbestos is present or not). The PLM analytical estimated results: NONE DETECTED. 5. A homogeneous spray-applied then troweled surfacing material/texture (“knock- down”) [samples 12-14]. This surfacing material/texture is on the garage ceiling and garage laundry room. The estimated surface area is more than 32 sf, but less than 1,000 sf, requiring a minimum of at least three surfacing/texture material samples. The PLM analytical estimated results: NONE DETECTED. A total of 14 suspect homogeneous ACM/ACBM bulk samples were collected from the interior spaces of the house and garage and 14 samples were analyzed. The bulk samples were analyzed by PLM by a NVLAP accredited laboratory in accordance with Colorado State Regulation 8 for the presence of asbestos mineral fibers. There is NO asbestos in all 14 samples analyzed. See supporting Hayes Microbial Consulting, Inc. data report #17017685. HEALTHSAFE CONCLUSIONS: There is NO asbestos in any of the interior suspect building materials of the house and garage. If changes are slated to be made of the house and garage interiors NO asbestos abatement will be required. All interior building materials that may need to be removed or disturbed can be dealt with without the concerns for asbestos fibers. All building waste and debris can be disposed of in any landfill which accepts normal, non-hazardous building waste. Sincerely Submitted, Jim Baker 01/22/2018 HMC #17017685 contact@hayesmicrobial.com http://hayesmicrobial.com/ Analysis Report prepared for HealthSafe Inspections 390 Apple Drive Basalt, CO. 81621 USA Phone: 970-920-2100 Job Name: Moss c/o Sarah Oates 805 Roaring Fork Rd Aspen CO 81611 Date Sampled: 06-27-2017 Date Analyzed: 06-30-2017 Report Date: 06-30-2017 EPA Laboratory ID# VA01419 NVLAP Lab Code: 500096-0 Asbestos License: 300435 License: #PH-0198 Page 1 of 5 01/22/2018 HMC #17017685 HealthSafe Inspections 390 Apple Drive Basalt, CO 81621 USA June 30, 2017 Client Job Number: Client Job Name:Moss c/o Sarah Oates 805 Roaring Fork Rd Aspen CO 81611 Dear HealthSafe Inspections, We would like to thank you for trusting Hayes Microbial for your analytical needs. On June 29, 2017 we received 14 samples by FedEx for the job referenced above. 14 samples were received in good condition. The results in this analysis pertain only to this job, collected on the stated date and should not be used in the interpretation of any other job. This report may not be duplicated, except in full, without the written consent of Hayes Microbial Consulting, LLC. This laboratory bears no responsibility for sample collection activities, analytical method limitations, or your use of the test results. Interpretation and use of test results are your responsibility. Any reference to health effects or interpretation of mold levels is strictly the opinion of Hayes Microbial Consulting. In no event, shall Hayes Microbial Consulting or any of its employees be liable for lost profits or any special, incidental or consequential damages arising out of your use of the test results. Steve Hayes, BSMT(ASCP) Laboratory Director Hayes Microbial Consulting, LLC Page 2 of 5 01/22/2018 HMC #17017685 EPA 600/R-93, M-4/82-020 (PLM)HealthSafe Inspections 390 Apple Drive Basalt, CO 81621 USA Phone: 970-920-2100 Job Number: Collected by: Email: Jim Baker healthsafeinspections@gmail.com Job Name:Moss c/o Sarah Oates 805 Roaring Fork Rd Aspen CO 81611 Date Collected: Date Received: Date Reported: 06/27/2017 06/29/2017 06/30/2017 #Sample Name Description Asbestos Fibers Other Fibers Non- Fibers 1 1 805-STOR-V Vinyl / Gray (None Detected) (None Detected) 100 % 2 2 805-FLT-C/W-J-1 Drywall / Gray (None Detected) 15 % Cellulose fibers 85 % Layer 2 805-FLT-C/W-J-1 Joint Compound / White (None Detected) (None Detected) 100 % 3 3 805-FLT-C/W-J-2 Drywall / White (None Detected) 12 % Cellulose fibers 88 % Layer 2 805-FLT-C/W-J-2 Joint Compound / White (None Detected) (None Detected) 100 % 4 4 805-FLT-C/W-T-1 Texture / White (None Detected) (None Detected) 100 % 5 5 805-FLT-C/W-T-2 Texture / White (None Detected) (None Detected) 100 % 6 6 805-FLT-C/W-T-3 Texture / White (None Detected) (None Detected) 100 % 7 7 805-FLT-C/W-T-4 Texture / White (None Detected) 12 % Cellulose fibers 88 % 8 8 805-FLT-C/W-T-5 Texture / White (None Detected) (None Detected) 100 % 9 9 805-FLT-C/W-T-6 Texture / White (None Detected) (None Detected) 100 % Signature: Date:06/30/2017 Reviewed by: Date:06/30/2017 Page 3 of 5 01/22/2018 HMC #17017685 EPA 600/R-93, M-4/82-020 (PLM)HealthSafe Inspections 390 Apple Drive Basalt, CO 81621 USA Phone: 970-920-2100 Job Number: Collected by: Email: Jim Baker healthsafeinspections@gmail.com Job Name:Moss c/o Sarah Oates 805 Roaring Fork Rd Aspen CO 81611 Date Collected: Date Received: Date Reported: 06/27/2017 06/29/2017 06/30/2017 #Sample Name Description Asbestos Fibers Other Fibers Non- Fibers 10 10 805-FLT-C/W-T-7 Texture / White (None Detected) (None Detected) 100 % 11 11 GAR-MECH-J Joint Compound / White (None Detected) 8 % Cellulose fibers 92 % 12 12 KD-GAR-CLG-T-1 Texture / White (None Detected) (None Detected) 100 % 13 13 KD-GAR-CLG-T-2 Texture / White (None Detected) (None Detected) 100 % 14 14 KD-GAR-CLG-T-3 Texture / White (None Detected) (None Detected) 100 % Signature: Date:06/30/2017 Reviewed by: Date:06/30/2017 Page 4 of 5 01/22/2018 HMC #17017685 Asbestos - Additional InformationHealthSafe Inspections 390 Apple Drive Basalt, CO 81621 USA Phone: 970-920-2100 All samples were received in acceptable condition unless otherwise noted on the report. The Report must not be used by the client to claim product certification, approval, or endorsement by: AIHA, NIST, NVLAP NY ELAP, or any agency. The results relate only to the items tested. The results include an inherent uncertainty of measurement associated with estimating percentages by polarized light microscopy. Measurement uncertainty data can be provided when requested. None detected: Below the detected reporting limit of 1% unless point counting is performed, then the detected, reporting limit is .25%. Per NY ELAP198.6 (NOB) TEM is the only reliable method to declare an NOB material as Non-Asbestos Containing. Hayes Microbial Consulting reserves the right to dispose of all samples after a period of 60 days in compliance with state and federal guidelines. Signature: Date:06/30/2017 Reviewed by: Date:06/30/2017 Page 5 of 5 01/22/2018 01/22/2018 01/22/2018