HomeMy WebLinkAboutFile Documents.RACE ST.0220.2018 (4).ARBKG:\city\building_dept\Aspen 2004 Checklists\fireplace registration .doc
over
City of Aspen and Pitkin County
FIREPLACE & WOODSTOVE REGISTRATION
*Required—Contact Assessors offices at 920-5160
Registration will not be accepted without a Parcel Id number
List all devices in your home (2 are allowed per building, except for gas appliances)
Note: If the number, type and location on this registration form do not match what is show on your plans or what is actually
installed, your permit or Certificate of Occupancy will be denied.
Type of Building (circle one): Reside ntial Other
Type of device Room Existing New Make & Model
Wood burning fireplace (select one)
?Site-built masonry
?Factory built insert: model
number:
_____________________
Gas log fireplace (select one)
?Site-built masonry
?Factory built insert: model
number:
_____________________
Certified woodstove
Gas fireplace appliance
(attach spec sheet)
If any devices are being removed, please describe here, i.e. “old woodstove removed from living room”
· __________________________________________________________________________________
· __________________________________________________________________________________
· __________________________________________________________________________________
_______________________________________________________ ____________________________
Signature of applicant Date
*Parcel Id number:____ ____ ____ ____ -- ____ ____ ____ -- ____ ____ -- ____ ____ ____
Street Address:_________________________________________________________________________
Owners Name:_________________________________________________________________________
2737-073-92-005
549 RACE ALLEY
ASPEN MARCH LLC
OLD GAS FIREPLACE APPLIANCE REMOVED FROM SITTING ROOM.
ENTERTAINMENT RM 002
SITTING ROOM 106
MASTER BEDROOM 201
X
X X MAJESTIC MARQUIS II 36
8.16.2018
09/04/2018
Specifications MARQ36IN
Please consult the manufacturer’s
installation manual for all details and
requirements before making a final
design layout decision.
MARQUIS II 36
Direct Vent Gas Fireplace
61" [1549]
31-1/16"
[789]
40-11/16" [1035]
57-5/8"
[1464]41-3/8"
[1051]
59-1/4" [1505]
16"
[406]
29-5/8"
[752]
3-7/8"
[98]
2-3/4"
[70]
16-1/8"
[410]
10-7/8"
[276]
Gas
Access
Electrical
Access
24"
[610]
23-1/2"
[597]Heat-Zone®
Port
Heat-Zone®
Port
54-15/16"
[1395]
1-5/16"[33 mm]3-5/8"[92 mm]
40-11/16"[1035 mm]
36-13/16"[935 mm]
35-9/16"[903 mm]
MODEL HEIGHT FRONT WIDTH BACK WIDTH DEPTH GLASS SIZE
MARQ36IN
Actual Framing Actual Framing Actual Framing Actual Framing 35-7/8" x 31-1/16"
[911 X 789]57-5/8"
[1464]
56"
[1422]
61"
[1549]
59-1/2"
[1511]
59-1/4"
[1505]
59-1/2"
[1511]
24"
[610]
24"
[610]
TOP VIEW
FRONT VIEWLEFT SIDE RIGHT SIDE
DECORATIVE FRONT
09/04/2018
Specifications MARQ36IN
MAJ/MARQUISII_MARQ36IN_0917(800) 927-6841 • www.majesticproducts.com
APPLIANCE LOCATION
WALL PENETRATION
MANTEL LEG/WALL PROJECTIONS
105"[2667]
26-1/2"[673]
26-1/2"[673]
29-3/4"[756]
29-3/4"[756]
59-1/2"[1511]
59-1/2" [1511]
59-1/2"[1511]
23-1/2"[597]
23-1/2"[597]
74-1/4" [1886]
74-1/4"[1886]
FRAMING DIMENSIONS
CLEARANCES TO COMBUSTIBLES
24"[610]
56"
[1422]
59-1/2" [1511]
10"[254]
1
46
3
6
12
9
49
52
55
58
FIREPLACE OPENING
MAX.
MIN.
MANTEL PROJECTIONS
74-3/16"*
73-3/16"
10"12"
Do not pack with insulationor other material.
*Shows center of vent framing hole with minimum vertical for top venting. Center of hole is 1" above center of horizontal vent pipe.*Add height for chase deeper than 24".
7" min
Fireplaceopening
Combustible ornon-combustible wall
Combustible ornon-combustible wall
14" min
14" min
Combustiblecolumn
Non-combustiblecolumn
4" maximum
Factory-suppliednon-combustibleboard
Fireplaceopening
Factory-suppliednon-combustibleboard
6" maximumSee section 13.Efor requiredclearances
1/2" Building material
1/2" Building material
Combustible Mantel
Non-combustible Mantel
0"
1"[25]1"[25]
See install manualsection 3.D 36"[914]
52"[1321]
from appliance
opening to
ceiling
87-3/16" [2215]
from bottom of
fireplace to ceiling
Note: A 12" non-combustible
hearth extension is required.
The replace may be raised
from the oor a minimum of
3" to eliminate this
requirement. See installation
manual for more details.
13Heat & Glo • TRUE-36, TRUE-42, TRUE-50 Installation Manual • 2282-980 Rev. L • 1/16
Non-Combustible Zone
Figure 3.7 Non-Combustible Zone
NO COMBUSTIBLES IN HATCHED AREA
1/2" BUILDING MATERIAL
(MAY BE COMBUSTIBLE)
FACTORY-SUPPLIED
1/2"NON-COMBUSTIBLE BOARD
PIPE IS FOR VISUAL
REFERENCE ONLY
1"
= COMBUSTIBLES
NOT ALLOWED
39"
2" x 4" OR GREATER
FRAMING MATERIAL
NOTE: 2" x 4" HEADER
CONFIGURATION
2" x 4" ONLY IN
GRAY AREA
PRODUCT LISTING CODES
US ANSI Z21.88-2009
CAN CSA 2.33-2009
UL307B
Product information provided
is not complete and is subject
to change without notice.
Product installation must
adhere strictly to instructions
accompanying product to
avoid risk of fire and potential
injury.
NON-COMBUSTIBLE ZONE
Combustible Mantel
Projections shown.
See installation manual for
Non-combustible Mantel
Projections
Note: All measurements in
inches.
Note: Measurement is taken
from bottom of appliance.
Note: Measurement from
fireplace opening to bottom
of appliance is 35-3/16".
1/2 IN NON-COMBUSTIBLE MATERIAL
09/04/2018