HomeMy WebLinkAboutFile Documents.520 N 8th St.0217.2018 (5).ARBKThird angle projection unless otherwise noted.
Tolerances:
Whole numbers = 1mm
One decimal place = 0.5mm
Two decimal places = 0.2mm
All angles 900.5 degrees unless specified
IF IN DOUBT - ASK! DO NOT SCALE
Supplier to deburr & remove sharp corners
A3
GLAZING
VISION
Saw Mills Road
Diss
Norfolk
IP22 4RG
Tel: +44 (0)333 8000 881
Fax: +44 (0)333 8000 882
Email: sales@glazingvision.co.uk
Website: www.glazingvision.co.uk
IT IS GLAZING VISION'S POLICY TO CONTINUOUSLY DEVELOP AND IMPROVE OUR
PRODUCTS. WE THEREFORE RESERVE THE RIGHT TO MODIFY OR CHANGE THE
DETAIL DESIGN AT OUR DISCRETION AND WITHOUT PRIOR NOTICE. THIS
DRAWING IS COPYRIGHT AND THE SOLE PROPERTY OF GLAZING VISION LTD. THE
DESIGNS/INFORMATION IT CONTAINS ARE PRIVATE AND CONFIDENTIAL. IT MUST
NOT BE COPIED, EXHIBITED OR COMMUNICATED TO THIRD PARTIES FOR ANY
PURPOSE OTHER THAN THAT FOR WHICH IT WAS ISSUED WITHOUT THE WRITTEN
PERMISSION OF GLAZING VISION LTD.
Revision DescriptionRev Drawn/Date Product:
Description:
Materials:
Finish:
Weight:
Quantity:
Scale:
Drawn By:
Drawn Date:
Drawing No:
Check Date:
Checked By:
607-ASS-201
GH
30.03.16
N/A
N/A
N/A
NTS
-
Initial release GH
30.03.16
JWL
30.03.16
607 - GV Standard Box
Product overview
N/A
GV STANDARD 3 WALL BOX
ELECTRONICALLY-OPERATED SLIDING ROOFLIGHT
Closed position
(Left exit shown)Open position
(Left exit shown)
REQUIRES WEATHERED KERB
(NOT SUPPLIED)
REFER TO DRAWING:
607-ASS-202
FEA MODELLED FOR
STRUCTURAL INTEGRITY
THERMALLY MODELLED FOR
INDUSTRY-LEADING EFFICIENCY
Sliding door Fixed glazing
Fully-weathered structural
3-walled kerb and internal
finishes (by others)
Polyester powder-coated aluminium extrusion
with integrated polyamide thermal breaks
offers exceptional thermal performance
Glazing Vision electronic controller including
battery operation with continuous trickle-charge
and motor drive mechanism, all concealed
within threshold tread plate
Twin drive motor mechanism comprising
planetary motor gearbox concealed within
framework for optimum performance
One way clutch and solenoid feature (patent
applied for) as standard, allows unit to be closed
without power. Hidden internal override allows unit
to be opened without power
Butyl seal applied during installation
(supplied by Glazing Vision)
08/23/2018
(Scale 1:50)
Section B-B ( Scale 1:25 )
Section A-A ( Scale 1:25 )
Detail C ( Scale 1 : 10 )
Cable exit hole
B B
A
A
C
Third angle projection unless otherwise noted.
Tolerances:
Whole numbers = 1mm
One decimal place = 0.5mm
Two decimal places = 0.2mm
All angles 900.5 degrees unless specified
IF IN DOUBT - ASK! DO NOT SCALE
Supplier to deburr & remove sharp corners
A3
GLAZING
VISION
Saw Mills Road
Diss
Norfolk
IP22 4RG
Tel: +44 (0)333 8000 881
Fax: +44 (0)333 8000 882
Email: sales@glazingvision.co.uk
Website: www.glazingvision.co.uk
IT IS GLAZING VISION'S POLICY TO CONTINUOUSLY DEVELOP AND IMPROVE OUR
PRODUCTS. WE THEREFORE RESERVE THE RIGHT TO MODIFY OR CHANGE THE
DETAIL DESIGN AT OUR DISCRETION AND WITHOUT PRIOR NOTICE. THIS
DRAWING IS COPYRIGHT AND THE SOLE PROPERTY OF GLAZING VISION LTD. THE
DESIGNS/INFORMATION IT CONTAINS ARE PRIVATE AND CONFIDENTIAL. IT MUST
NOT BE COPIED, EXHIBITED OR COMMUNICATED TO THIRD PARTIES FOR ANY
PURPOSE OTHER THAN THAT FOR WHICH IT WAS ISSUED WITHOUT THE WRITTEN
PERMISSION OF GLAZING VISION LTD.
Revision DescriptionRev Drawn/Date Product:607 - GV Standard 3 Wall Box
Description:Kerb detail
Materials:
Finish:
Weight:N/A
Quantity:
Scale:
Drawn By:
Drawn Date:
Drawing No:
Check Date:
Checked By:
607-ASS-202
GH
30.03.16
N/A
N/A
N/A
1:50, 1:25
D
Note for location of cable exit SW
30.06.17
C
Height removed. Min wall height added.JWL
15.02.17
JSL
30.06.17
KERB SPAN
Critical dimension - Customer
to specify (Includes
all weathering finishes)
150mm MINIMUM
kerb height
KERB WIDTH
Critical dimension - Customer to specify
Fully-weathered structural
3-wall kerb and internal
finishes (by others)
(Example decking)
VIEW NOT TO SCALE
Wall sealing surface -
no steps or undulations
exceeding 5mm
Flat top sealing surface -
No steps or undulations
exceeding 2mm
Kerb and wall structure must be load-bearing.
Stud walls acceptable but stud location
must be suitable for frame fixing.*MINIMUM wall heightStructural kerb thickness
100mm MINIMUM
206.0
88.0P25mm
110mm MINIMUM
for subframe
*This dimension is dependent on the KERB SPAN and HEIGHT.
NOTE: KERB SHOWN IS FOR LHS APERTURE.
MIRROR FOR RHS APERTURE
08/23/2018
Section A-A ( Scale 1:20 )
Detail A ( Scale 0.13 : 1 )
Detail B ( Scale 0.13 : 1 )
A A
A B
Third angle projection unless otherwise noted.
Tolerances:
Whole numbers = 1mm
One decimal place = 0.5mm
Two decimal places = 0.2mm
All angles 900.5 degrees unless specified
IF IN DOUBT - ASK! DO NOT SCALE
Supplier to deburr & remove sharp corners
A3
GLAZING
VISION
Saw Mills Road
Diss
Norfolk
IP22 4RG
Tel: +44 (0)333 8000 881
Fax: +44 (0)333 8000 882
Email: sales@glazingvision.co.uk
Website: www.glazingvision.co.uk
IT IS GLAZING VISION'S POLICY TO CONTINUOUSLY DEVELOP AND IMPROVE OUR
PRODUCTS. WE THEREFORE RESERVE THE RIGHT TO MODIFY OR CHANGE THE
DETAIL DESIGN AT OUR DISCRETION AND WITHOUT PRIOR NOTICE. THIS
DRAWING IS COPYRIGHT AND THE SOLE PROPERTY OF GLAZING VISION LTD. THE
DESIGNS/INFORMATION IT CONTAINS ARE PRIVATE AND CONFIDENTIAL. IT MUST
NOT BE COPIED, EXHIBITED OR COMMUNICATED TO THIRD PARTIES FOR ANY
PURPOSE OTHER THAN THAT FOR WHICH IT WAS ISSUED WITHOUT THE WRITTEN
PERMISSION OF GLAZING VISION LTD.
Revision DescriptionRev Drawn/Date Product:607 - GV Standard 3 Wall Box
Description:
Materials:
Finish:
Weight:N/A
Quantity:
Scale:
Drawn By:
Drawn Date:
Drawing No:
Check Date:
Checked By:
607-ASS-203
GH
14.03.16
N/A
N/A
N/A
1:50 1:20
-
Initial release GH
14.03.16
JWL
14.03.16
Section A-A
Plan View
(Scale 1:50)
KERB WIDTH
Critical dimension. Customer to specify
(Internal opening = kerb width - internal finishes)
Fully-weathered structural
3-walled kerb and internal
finishes (by others)
Details A and B on drawing 607-ASS-206
08/23/2018
Section B-B ( Scale 1 : 20 )
Detail C ( Scale 0.13 : 1 )
Detail D ( Scale 0.13 : 1 )
B
B
C
D
Third angle projection unless otherwise noted.
Tolerances:
Whole numbers = 1mm
One decimal place = 0.5mm
Two decimal places = 0.2mm
All angles 900.5 degrees unless specified
IF IN DOUBT - ASK! DO NOT SCALE
Supplier to deburr & remove sharp corners
A3
GLAZING
VISION
Saw Mills Road
Diss
Norfolk
IP22 4RG
Tel: +44 (0)333 8000 881
Fax: +44 (0)333 8000 882
Email: sales@glazingvision.co.uk
Website: www.glazingvision.co.uk
IT IS GLAZING VISION'S POLICY TO CONTINUOUSLY DEVELOP AND IMPROVE OUR
PRODUCTS. WE THEREFORE RESERVE THE RIGHT TO MODIFY OR CHANGE THE
DETAIL DESIGN AT OUR DISCRETION AND WITHOUT PRIOR NOTICE. THIS
DRAWING IS COPYRIGHT AND THE SOLE PROPERTY OF GLAZING VISION LTD. THE
DESIGNS/INFORMATION IT CONTAINS ARE PRIVATE AND CONFIDENTIAL. IT MUST
NOT BE COPIED, EXHIBITED OR COMMUNICATED TO THIRD PARTIES FOR ANY
PURPOSE OTHER THAN THAT FOR WHICH IT WAS ISSUED WITHOUT THE WRITTEN
PERMISSION OF GLAZING VISION LTD.
Revision DescriptionRev Drawn/Date Product:607 - GV Standard 3 Wall Box
Description:
Materials:
Finish:
Weight:N/A
Quantity:
Scale:
Drawn By:
Drawn Date:
Drawing No:
Check Date:
Checked By:
607-ASS-204
GH
30.03.16
N/A
N/A
N/A
1:50, 1:20
-
Initial release GH
30.03.16
JWL
30.03.16
Section B-B
Plan View
(Scale 1:50)
KERB SPAN
Critical dimension. Includes all
weathering finishes (customer to specify)
(Internal opening =
Kerb span - internal finishes)
Details C and D on drawing 607-ASS-207
Fully-weathered structural
3-walled kerb and internal
finishes (by others)
08/23/2018
Section C-C ( Scale 1 : 20 )
Detail E ( Scale 0.13 : 1 )
Section C-C ( Scale 1:20 )
Detail E ( Scale 1 : 10 )
C
C
E
C
C
E
Third angle projection unless otherwise noted.
Tolerances:
Whole numbers = 1mm
One decimal place = 0.5mm
Two decimal places = 0.2mm
All angles 900.5 degrees unless specified
IF IN DOUBT - ASK! DO NOT SCALE
Supplier to deburr & remove sharp corners
A3
GLAZING
VISION
Saw Mills Road
Diss
Norfolk
IP22 4RG
Tel: +44 (0)333 8000 881
Fax: +44 (0)333 8000 882
Email: sales@glazingvision.co.uk
Website: www.glazingvision.co.uk
IT IS GLAZING VISION'S POLICY TO CONTINUOUSLY DEVELOP AND IMPROVE OUR
PRODUCTS. WE THEREFORE RESERVE THE RIGHT TO MODIFY OR CHANGE THE
DETAIL DESIGN AT OUR DISCRETION AND WITHOUT PRIOR NOTICE. THIS
DRAWING IS COPYRIGHT AND THE SOLE PROPERTY OF GLAZING VISION LTD. THE
DESIGNS/INFORMATION IT CONTAINS ARE PRIVATE AND CONFIDENTIAL. IT MUST
NOT BE COPIED, EXHIBITED OR COMMUNICATED TO THIRD PARTIES FOR ANY
PURPOSE OTHER THAN THAT FOR WHICH IT WAS ISSUED WITHOUT THE WRITTEN
PERMISSION OF GLAZING VISION LTD.
Revision DescriptionRev Drawn/Date Product:607 - GV Standard Box
Description:
Materials:
Finish:
Weight:N/A
Quantity:
Scale:
Drawn By:
Drawn Date:
Drawing No:
Check Date:
Checked By:
607-ASS-205
GH
30.03.16
N/A
N/A
N/A
1:50, 1:20
-
Initial release GH
30.03.16
A
Height changed to bottom of mid bar SW
15.02.17
JWL
15.02.17
Section C-C
Plan View
(Scale 1:50)
KERB SPAN
Critical dimension. Includes all
weathering finishes (customer to specify)
(Internal opening = kerb span - internal finishes)HEIGHTCritical dimension. Customer to specifyFully-weathered structural 3-walled kerb
and internal finishes (by others)
Detail E on drawing 607-ASS-207
HEIGHTCritical dimension. Customer to specifyKERB SPAN
Critical dimension. Includes all
weathering finishes (customer to specify)
(Internal opening = kerb span - internal finishes)Middle of mid bar*Top of mid bar*Overall height*Min wall heightFully-weathered structural 3 walled kerb
and internal finishes (by others)
*These dimensions are dependent on HEIGHT and KERB SPAN.
08/23/2018
Section A-A ( Scale 1 : 30 )
Detail A ( Scale 1 : 2 )
Detail B ( Scale 1 : 2 )
A AAB
Third angle projection unless otherwise noted.
Tolerances:
Whole numbers = 1mm
One decimal place = 0.5mm
Two decimal places = 0.2mm
All angles 900.5 degrees unless specified
IF IN DOUBT - ASK! DO NOT SCALE
Supplier to deburr & remove sharp corners
A3
GLAZING
VISION
Saw Mills Road
Diss
Norfolk
IP22 4RG
Tel: +44 (0)333 8000 881
Fax: +44 (0)333 8000 882
Email: sales@glazingvision.co.uk
Website: www.glazingvision.co.uk
IT IS GLAZING VISION'S POLICY TO CONTINUOUSLY DEVELOP AND IMPROVE OUR
PRODUCTS. WE THEREFORE RESERVE THE RIGHT TO MODIFY OR CHANGE THE
DETAIL DESIGN AT OUR DISCRETION AND WITHOUT PRIOR NOTICE. THIS
DRAWING IS COPYRIGHT AND THE SOLE PROPERTY OF GLAZING VISION LTD. THE
DESIGNS/INFORMATION IT CONTAINS ARE PRIVATE AND CONFIDENTIAL. IT MUST
NOT BE COPIED, EXHIBITED OR COMMUNICATED TO THIRD PARTIES FOR ANY
PURPOSE OTHER THAN THAT FOR WHICH IT WAS ISSUED WITHOUT THE WRITTEN
PERMISSION OF GLAZING VISION LTD.
Revision DescriptionRev Drawn/Date Product:607 - GV Standard 3 Wall Box
Description:
Materials:
Finish:
Weight:N/A
Quantity:
Scale:
Drawn By:
Drawn Date:
Drawing No:
Check Date:
Checked By:
607-ASS-206
GH
30.03.16
N/A
N/A
N/A
1:2
-
Initial release GH
30.03.16
A
Additional dims added, silicone added between support frame and wall GH
05.04.16
JWL
05.04.16
Detail A-B (from drawing 607-ASS-203)
*Standard triple-glazed unit comprises:
6mm Clear HST toughened outer
14mm Warm edge argon-filled silicone-sealed spacer
4mm Clear HST toughened soft coat low E middle
14mm Warm edge argon-filled silicone-sealed spacer
4mm Clear HST toughened soft coat low E inner
Double-glazed option available on some sizes
Standard colour:
RAL7015 Slate grey outer
RAL9010 Pure white inner
Staged seals for
exceptional air tightness
and thermal performance
Factory-applied
glazing tape
Factory-applied
structural adhesive seal
134 mm
83 mm40 mm Black obscured
glass region
39mm Polyamide breaks for
excellent thermal insulation91mm133mmInsulated glass unit*
Factory-applied
silicone seal and
polyethylene
backing rod
Insulated glass unit*
Details from drawing 607-ASS-203
Plastic horse-shoe packers and
countersunk woodscrews to
attach support assembly to walls
Factory-applied
glazing tape
Factory-applied
glazing tape
Weathering
(by others)
Site-applied structural adhesive
Gap (typically 10mm) between cover
plate and wall for clearance - gap to be
covered by internal finishes (by others)
Site-applied PIR insulation
Wall (by others)
Polyester powder-coated
aluminium external framework
(STD = RAL7015 Slate Grey)
Factory-applied silicone seal
and polyethylene backing rod
Site-applied polyester
powder-coated aluminium
internal cover plate
(STD = RAL 9010 Pure White)
Factory-applied polyester
powder-coated aluminium
internal flashing
(STD = RAL9010 Pure White)
Polyester powder-coated
aluminium external framework
(STD = RAL7015 Slate Grey)
Factory-applied polyester powder-coated
aluminium internal flashing
(STD = RAL9010 Pure White)
Insulated
glass unit*
Factory-applied
structural adhesive seal
130mm 62mm95mm137mm216mm104mm
Silicone seal
Silicone seal
08/23/2018
Section B-B ( Scale 1 : 40 )
Detail C ( Scale 1 : 2 )
Detail D ( Scale 1 : 2 )
Section C-C ( Scale 1 : 40 )
Detail E ( Scale 1 : 2 )
BB C DCC E
Third angle projection unless otherwise noted.
Tolerances:
Whole numbers = 1mm
One decimal place = 0.5mm
Two decimal places = 0.2mm
All angles 900.5 degrees unless specified
IF IN DOUBT - ASK! DO NOT SCALE
Supplier to deburr & remove sharp corners
A3
GLAZING
VISION
Saw Mills Road
Diss
Norfolk
IP22 4RG
Tel: +44 (0)333 8000 881
Fax: +44 (0)333 8000 882
Email: sales@glazingvision.co.uk
Website: www.glazingvision.co.uk
IT IS GLAZING VISION'S POLICY TO CONTINUOUSLY DEVELOP AND IMPROVE OUR
PRODUCTS. WE THEREFORE RESERVE THE RIGHT TO MODIFY OR CHANGE THE
DETAIL DESIGN AT OUR DISCRETION AND WITHOUT PRIOR NOTICE. THIS
DRAWING IS COPYRIGHT AND THE SOLE PROPERTY OF GLAZING VISION LTD. THE
DESIGNS/INFORMATION IT CONTAINS ARE PRIVATE AND CONFIDENTIAL. IT MUST
NOT BE COPIED, EXHIBITED OR COMMUNICATED TO THIRD PARTIES FOR ANY
PURPOSE OTHER THAN THAT FOR WHICH IT WAS ISSUED WITHOUT THE WRITTEN
PERMISSION OF GLAZING VISION LTD.
Revision DescriptionRev Drawn/Date Product:607 - GV Standard 3 Wall Box
Description:
Materials:
Finish:
Weight:N/A
Quantity:
Scale:
Drawn By:
Drawn Date:
Drawing No:
Check Date:
Checked By:
607-ASS-207
GH
30.03.16
N/A
N/A
N/A
1:2
-
Initial release GH
30.03.16
A
Additional dims added, silicone added between support frame and wall GH
05.04.16
JWL
05.04.16
Details C-D-E (from drawing 607-ASS-204 & 607-ASS-205)
*Standard triple-glazed unit comprises:
6mm Clear HST toughened outer
14mm Warm edge argon-filled silicone-sealed spacer
4mm Clear HST toughened soft coat low E middle
14mm Warm edge argon-filled silicone-sealed spacer
4mm Clear HST toughened soft coat low E inner
Double-glazed option available on some sizes
Standard colour:
RAL7015 Slate grey outer
RAL9010 Pure white inner
Fully-weathered kerb and
roof structures (by others)
Factory-applied
glazing tape
Factory-applied
structural
adhesive seal
Plastic horse-shoe packers and
countersunk woodscrews to
attach support assembly to walls
Support assembly
fixed to wall
Details from drawings 607-ASS-204 and 607-ASS-205
Insulated glass unit*
Staged seals for
exceptional air tightness
and thermal performance
20mm Polyamide breaks for
excellent thermal insulation
Polyester powder-coated
aluminium external framework
(STD = RAL7015 Slate Grey)
Polyester powder-coated
aluminium tread plate
(STD = RAL9005 Jet Black)86mm83mm
126mmHybrid linear bearing
Insulated
glass unit*
Polyester powder-coated
aluminium cover plate
(STD = RAL9010 Pure White)
Polyester powder-coated
aluminium drip flashing
(STD = RAL7015 Slate Grey)
Stainless steel bar
Insulated
glass unit*
39mm Polyamide
breaks for excellent
thermal insulation
Factory-applied
glazing tape
Weathering
(by others)
Site-applied
PIR insulation
Site-applied
structural adhesive
Factory-applied
structural
adhesive seal
Gap (typically 10mm) between cover
plate and wall for clearance - gap to be
covered by internal finishes (by others)
Weathering (by others)
Gap (typically 10mm) between cover
plate and wall for clearance - gap to be
covered by internal finishes (by others)
Site-applied
PIR insulation
Polyester powder-coated aluminium
clip-on cover to hide fixings
(STD = RAL7015 Slate Grey)
Factory-applied silicone seal
and polyethylene backing rod
Factory-applied
silicone seal and
polyethylene
backing rod
Polyester powder-coated
aluminium external framework
(STD = RAL7015 Slate Grey)
Polyester powder-coated
aluminium threshold step
(STD = RAL9010 Pure White)
Polyethylene
thermal break
PVC-coated seal
Wall (by others)
Factory-applied
glazing tape
Factory-applied
structural
adhesive seal
Wall (by
others)
Site-applied structural adhesive
127mm
127mm 223mmSilicone
seal
Silicone
seal
Silicone seal
Silicone seal
08/23/2018
Section A-A ( Scale 1:20 )
Detail A ( Scale 0.13 : 1 )
Detail B ( Scale 0.13 : 1 )
A A
A B
Third angle projection unless otherwise noted.
Tolerances:
Whole numbers = 1mm
One decimal place = 0.5mm
Two decimal places = 0.2mm
All angles 900.5 degrees unless specified
IF IN DOUBT - ASK! DO NOT SCALE
Supplier to deburr & remove sharp corners
A3
GLAZING
VISION
Saw Mills Road
Diss
Norfolk
IP22 4RG
Tel: +44 (0)333 8000 881
Fax: +44 (0)333 8000 882
Email: sales@glazingvision.co.uk
Website: www.glazingvision.co.uk
IT IS GLAZING VISION'S POLICY TO CONTINUOUSLY DEVELOP AND IMPROVE OUR
PRODUCTS. WE THEREFORE RESERVE THE RIGHT TO MODIFY OR CHANGE THE
DETAIL DESIGN AT OUR DISCRETION AND WITHOUT PRIOR NOTICE. THIS
DRAWING IS COPYRIGHT AND THE SOLE PROPERTY OF GLAZING VISION LTD. THE
DESIGNS/INFORMATION IT CONTAINS ARE PRIVATE AND CONFIDENTIAL. IT MUST
NOT BE COPIED, EXHIBITED OR COMMUNICATED TO THIRD PARTIES FOR ANY
PURPOSE OTHER THAN THAT FOR WHICH IT WAS ISSUED WITHOUT THE WRITTEN
PERMISSION OF GLAZING VISION LTD.
Revision DescriptionRev Drawn/Date Product:607 - GV Standard 3 Wall Box
Description:
Materials:
Finish:
Weight:N/A
Quantity:
Scale:
Drawn By:
Drawn Date:
Drawing No:
Check Date:
Checked By:
607-ASS-208
GH
30.03.16
N/A
N/A
N/A
1:50 1:20
-
Initial release GH
30.03.16
JWL
30.03.16
Section A-A DGU
Plan View
(Scale 1:50)
KERB WIDTH
Critical dimension. Customer to specify
(Internal opening = kerb width - internal finishes)
Fully-weathered structural
3-walled kerb and internal
finishes (by others)
Details A and B on drawing 607-ASS-211
08/23/2018
Section B-B ( Scale 1 : 20 )
Detail C ( Scale 0.13 : 1 )
Detail D ( Scale 0.13 : 1 )
B
B
C
D
Third angle projection unless otherwise noted.
Tolerances:
Whole numbers = 1mm
One decimal place = 0.5mm
Two decimal places = 0.2mm
All angles 900.5 degrees unless specified
IF IN DOUBT - ASK! DO NOT SCALE
Supplier to deburr & remove sharp corners
A3
GLAZING
VISION
Saw Mills Road
Diss
Norfolk
IP22 4RG
Tel: +44 (0)333 8000 881
Fax: +44 (0)333 8000 882
Email: sales@glazingvision.co.uk
Website: www.glazingvision.co.uk
IT IS GLAZING VISION'S POLICY TO CONTINUOUSLY DEVELOP AND IMPROVE OUR
PRODUCTS. WE THEREFORE RESERVE THE RIGHT TO MODIFY OR CHANGE THE
DETAIL DESIGN AT OUR DISCRETION AND WITHOUT PRIOR NOTICE. THIS
DRAWING IS COPYRIGHT AND THE SOLE PROPERTY OF GLAZING VISION LTD. THE
DESIGNS/INFORMATION IT CONTAINS ARE PRIVATE AND CONFIDENTIAL. IT MUST
NOT BE COPIED, EXHIBITED OR COMMUNICATED TO THIRD PARTIES FOR ANY
PURPOSE OTHER THAN THAT FOR WHICH IT WAS ISSUED WITHOUT THE WRITTEN
PERMISSION OF GLAZING VISION LTD.
Revision DescriptionRev Drawn/Date Product:607 - GV Standard 3 Wall Box
Description:
Materials:
Finish:
Weight:N/A
Quantity:
Scale:
Drawn By:
Drawn Date:
Drawing No:
Check Date:
Checked By:
607-ASS-209
GH
30.03.16
N/A
N/A
N/A
1:50, 1:20
-
Initial release GH
30.03.16
JWL
30.03.16
Section B-B DGU
Plan View
(Scale 1:50)
KERB SPAN
Critical dimension. Includes all weathering finishes
(customer to specify)
(Internal opening = Kerb span - internal finishes)
Details C and D on drawing 607-ASS-212
Fully-weathered structural
3-walled kerb and internal
finishes (by others)
08/23/2018
Section C-C ( Scale 1:20 )
Detail E ( Scale 1 : 10 )
C
C
E
Third angle projection unless otherwise noted.
Tolerances:
Whole numbers = 1mm
One decimal place = 0.5mm
Two decimal places = 0.2mm
All angles 900.5 degrees unless specified
IF IN DOUBT - ASK! DO NOT SCALE
Supplier to deburr & remove sharp corners
A3
GLAZING
VISION
Saw Mills Road
Diss
Norfolk
IP22 4RG
Tel: +44 (0)333 8000 881
Fax: +44 (0)333 8000 882
Email: sales@glazingvision.co.uk
Website: www.glazingvision.co.uk
IT IS GLAZING VISION'S POLICY TO CONTINUOUSLY DEVELOP AND IMPROVE OUR
PRODUCTS. WE THEREFORE RESERVE THE RIGHT TO MODIFY OR CHANGE THE
DETAIL DESIGN AT OUR DISCRETION AND WITHOUT PRIOR NOTICE. THIS
DRAWING IS COPYRIGHT AND THE SOLE PROPERTY OF GLAZING VISION LTD. THE
DESIGNS/INFORMATION IT CONTAINS ARE PRIVATE AND CONFIDENTIAL. IT MUST
NOT BE COPIED, EXHIBITED OR COMMUNICATED TO THIRD PARTIES FOR ANY
PURPOSE OTHER THAN THAT FOR WHICH IT WAS ISSUED WITHOUT THE WRITTEN
PERMISSION OF GLAZING VISION LTD.
Revision DescriptionRev Drawn/Date Product:607 - GV Standard Box
Description:
Materials:
Finish:
Weight:N/A
Quantity:
Scale:
Drawn By:
Drawn Date:
Drawing No:
Check Date:
Checked By:
607-ASS-210
GH
30.03.16
N/A
N/A
N/A
1:50, 1:20
-
Initial release GH
30.03.16
A
Height changed to bottom of mid bar SW
15.02.17
JWL
15.02.17
Section C-C DGU
Plan View
(Scale 1:50)
Fully-weathered structural 3-walled kerb
and internal finishes (by others)
Detail E on drawing 607-ASS-212
KERB SPAN
Critical dimension. Includes all weathering
finishes (customer to specify)
(Internal opening = Kerb span
- internal finishes)
HEIGHTCritical dimension. Customer to specify*Middle of mid bar*Min wall height*Overall height*Top of mid bar*These dimensions are dependent on the HEIGHT and KERB SPAN.
08/23/2018
Section A-A ( Scale 1 : 30 )
Detail A ( Scale 1 : 2 )
Detail B ( Scale 1 : 2 )
A AAB
Third angle projection unless otherwise noted.
Tolerances:
Whole numbers = 1mm
One decimal place = 0.5mm
Two decimal places = 0.2mm
All angles 900.5 degrees unless specified
IF IN DOUBT - ASK! DO NOT SCALE
Supplier to deburr & remove sharp corners
A3
GLAZING
VISION
Saw Mills Road
Diss
Norfolk
IP22 4RG
Tel: +44 (0)333 8000 881
Fax: +44 (0)333 8000 882
Email: sales@glazingvision.co.uk
Website: www.glazingvision.co.uk
IT IS GLAZING VISION'S POLICY TO CONTINUOUSLY DEVELOP AND IMPROVE OUR
PRODUCTS. WE THEREFORE RESERVE THE RIGHT TO MODIFY OR CHANGE THE
DETAIL DESIGN AT OUR DISCRETION AND WITHOUT PRIOR NOTICE. THIS
DRAWING IS COPYRIGHT AND THE SOLE PROPERTY OF GLAZING VISION LTD. THE
DESIGNS/INFORMATION IT CONTAINS ARE PRIVATE AND CONFIDENTIAL. IT MUST
NOT BE COPIED, EXHIBITED OR COMMUNICATED TO THIRD PARTIES FOR ANY
PURPOSE OTHER THAN THAT FOR WHICH IT WAS ISSUED WITHOUT THE WRITTEN
PERMISSION OF GLAZING VISION LTD.
Revision DescriptionRev Drawn/Date Product:607 - GV Standard 3 Wall Box
Description:
Materials:
Finish:
Weight:N/A
Quantity:
Scale:
Drawn By:
Drawn Date:
Drawing No:
Check Date:
Checked By:
607-ASS-211
GH
30.03.16
N/A
N/A
N/A
1:2
-
Initial release GH
30.03.16
A
Additional dims added, silicone added between support frame and wall GH
05.04.16
JWL
05.04.16
Detail A-B DGU (from drawing 607-ASS-208)
*Standard double-glazed unit comprises:
6mm Clear HST toughened outer
20mm Warm edge argon-filled silicone-sealed spacer
6mm Clear HST toughened soft coat low-E inner
Triple-glazed option available on some sizes
Standard colour:
RAL7015 Slate grey outer
RAL9010 Pure white inner
Staged seals for
exceptional air tightness
and thermal performance
Factory-applied
glazing tape
Factory-applied
structural adhesive seal
134 mm
40 mm Black obscured
glass region
39mm Polyamide breaks for
excellent thermal insulation
Factory-applied
silicone seal and
polyethylene
backing rod
Insulated glass unit*
Insulated
glass unit*
Insulated glass unit*
Details from drawing 607-ASS-208
Weathering (by others)
Site-applied structural adhesive
Site-applied PIR insulation
Gap (typically 10mm) between cover
plate and wall for clearance - gap to be
covered by internal finishes (by others)
Factory-applied
glazing tape
Factory-applied
structural adhesive seal
89 mmPlastic horse-shoe packers and
countersunk woodscrews to
attach support assembly to walls
Wall (by others)
Polyester powder-coated
aluminium external framework
(STD = RAL7015 Slate Grey)
Factory-applied polyester
powder-coated aluminium
internal flashing
(STD = RAL9010 Pure White)
Site-applied polyester
powder-coated aluminium
internal cover plate
(STD = RAL9010 Pure White)
Factory-applied polyester powder-coated
aluminium internal flashing
(STD = RAL9010 Pure White)
Factory-applied silicone seal
and polyethylene backing rod
Polyester powder-coated
aluminium external framework
(STD = RAL7015 Slate Grey)95 mmFactory-applied
glazing tape127 mm130mm 62mm98mm130mm216mmSilicone seal
Silicone seal
104mm
08/23/2018
Section B-B ( Scale 1 : 40 )
Detail C ( Scale 1 : 2 )Detail D ( Scale 1 : 2 )
Section C-C ( Scale 1 : 40 )
Detail E ( Scale 1 : 2 )
BB C DCC E
Third angle projection unless otherwise noted.
Tolerances:
Whole numbers = 1mm
One decimal place = 0.5mm
Two decimal places = 0.2mm
All angles 900.5 degrees unless specified
IF IN DOUBT - ASK! DO NOT SCALE
Supplier to deburr & remove sharp corners
A3
GLAZING
VISION
Saw Mills Road
Diss
Norfolk
IP22 4RG
Tel: +44 (0)333 8000 881
Fax: +44 (0)333 8000 882
Email: sales@glazingvision.co.uk
Website: www.glazingvision.co.uk
IT IS GLAZING VISION'S POLICY TO CONTINUOUSLY DEVELOP AND IMPROVE OUR
PRODUCTS. WE THEREFORE RESERVE THE RIGHT TO MODIFY OR CHANGE THE
DETAIL DESIGN AT OUR DISCRETION AND WITHOUT PRIOR NOTICE. THIS
DRAWING IS COPYRIGHT AND THE SOLE PROPERTY OF GLAZING VISION LTD. THE
DESIGNS/INFORMATION IT CONTAINS ARE PRIVATE AND CONFIDENTIAL. IT MUST
NOT BE COPIED, EXHIBITED OR COMMUNICATED TO THIRD PARTIES FOR ANY
PURPOSE OTHER THAN THAT FOR WHICH IT WAS ISSUED WITHOUT THE WRITTEN
PERMISSION OF GLAZING VISION LTD.
Revision DescriptionRev Drawn/Date Product:607 - GV Standard 3 Wall Box
Description:
Materials:
Finish:
Weight:N/A
Quantity:
Scale:
Drawn By:
Drawn Date:
Drawing No:
Check Date:
Checked By:
607-ASS-212
GH
30.03.16
N/A
N/A
N/A
1:2
-
Initial release GH
30.03.16
A
Additional dims added, silicone added between support frame and wall GH
05.04.16
JWL
05.04.16
Details D-E DGU (from drawing
607-ASS-209 & 607-ASS-210)
*Standard double-glazed unit comprises:
6mm Clear HST toughened outer
20mm Warm edge argon-filled silicone-sealed spacer
6mm Clear HST toughened soft coat low E inner
Triple-glazed option available on some sizes
Standard colour:
RAL7015 Slate grey outer
RAL9010 Pure white inner
Factory-applied silicone seal
and polyethylene backing rod
Fully-weathered kerb and
roof structures (by others)
Factory-applied
glazing tape
Factory-applied
structural
adhesive seal
Plastic horse shoe packers and
countersunk woodscrews to
attach support assembly to walls
Polyester powder-coated
aluminium drip flashing
(STD = RAL7015 Slate Grey)
Support assembly
fixed to wall
Details from drawings 607-ASS-209 and 607-ASS-210
Weathering
(by others)
Site-applied
PIR insulation
Site-applied
PIR insulation
Gap (typically 10mm) between cover
plate and wall for clearance - gap to be
covered by internal finishes (by others)
Site-applied structural adhesive
Insulated glass unit*
Staged seals for
exceptional air tightness
and thermal performance
20mm Polyamide breaks for
excellent thermal insulation
Polyester powder-coated
external aluminium framework
(STD = RAL7015 Slate Grey)
Polyester powder-coated aluminium
clip-on cover to hide fixings
(STD = RAL7015 Slate Grey)
Polyester powder-coated
aluminium tread plate
(STD = RAL9005 Jet black)86 mm83 mm
126mmWeathering
(by others)
Hybrid linear bearing
Insulated
glass unit*
Polyester powder-coated
aluminium cover plate
(STD = RAL9010 Pure White)
Gap (typically 10mm) between cover
plate and wall for clearance - gap to be
covered by internal finishes (by others)
Factory-applied
structural
adhesive seal
Factory-applied
glazing tape
Stainless steel bar
39mm Polyamide
breaks for excellent
thermal insulation
Insulated
glass unit*
Polyester powder-coated
aluminium external framework
(STD = RAL7015 Slate Grey)
Factory-applied
glazing tape
Factory-applied
structural
adhesive seal
Polyethylene
thermal break
Polyester powder-coated
aluminium threshold step
(STD = RAL9010 Pure White)
Site-applied
structural adhesive
Factory-applied
silicone seal and
polyethylene
backing rod
PVC-coated seal
Wall (by others)
Wall (by
others)223mm127mm127mm
Silicone
seal
Silicone
seal
Silicone seal
Silicone seal
08/23/2018
Section C-C
Detail E ( Scale 1 : 10 )
C
C
E
Third angle projection unless otherwise noted.
Tolerances:
Whole numbers = ±1mm
One decimal place = ±0.5mm
Two decimal places = ±0.2mm
All angles 90±0.5 degrees unless specified
IF IN DOUBT - ASK! DO NOT SCALE
Supplier to deburr & remove sharp corners
A3
GLAZINGVISION
Saw Mills RoadDissNorfolkIP22 4RG
Tel: +44 (0)333 8000 881Fax: +44 (0)333 8000 882Email: sales@glazingvision.co.ukWebsite: www.glazingvision.co.uk
IT IS GLAZING VISION'S POLICY TO CONTINUOUSLY DEVELOP AND IMPROVE OUR
PRODUCTS. WE THEREFORE RESERVE THE RIGHT TO MODIFY OR CHANGE THE
DETAIL DESIGN AT OUR DISCRETION AND WITHOUT PRIOR NOTICE. THIS
DRAWING IS COPYRIGHT AND THE SOLE PROPERTY OF GLAZING VISION LTD. THE
DESIGNS/INFORMATION IT CONTAINS ARE PRIVATE AND CONFIDENTIAL. IT MUST
NOT BE COPIED, EXHIBITED OR COMMUNICATED TO THIRD PARTIES FOR ANY
PURPOSE OTHER THAN THAT FOR WHICH IT WAS ISSUED WITHOUT THE WRITTEN
PERMISSION OF GLAZING VISION LTD.
Revision DescriptionRev Drawn/Date Product:
Description:
Materials:
Finish:
Weight:
Quantity:
Scale:
Drawn By:
Drawn Date:
Drawing No:
Check Date:
Checked By:
Plan View
Fully-weathered structural 3-walled kerb
and internal finishes (by others)
Detail E on drawing 607-ASS-212
*These dimensions are dependent on the HEIGHT and KERB SPAN.* Middle of Mid-bar : 1248 mm minimumHeight : 1219 mm minimum* Top of Mid-bar : 1277 mm minimum* Overall Height : 1494 mm minimum* Min Wall Height :1544 mm minimumKerb Span 1219 mm
Page 1 of 2Page 1 of 2
3-Wall Box - 3WB
As above
Scratch and shell free
N/A
1
NTS
System
29-May-2018
K-117205-RL2C-01
C Product updated
This is a computer generated drawing
Order item ref: RL2
29-05-2018
08/23/2018
Section B-B
Section A-A
Detail C
Cable exit hole
B B
A
A
C
Third angle projection unless otherwise noted.
Tolerances:
Whole numbers =±1mm
One decimal place = ±0.5mm
Two decimal places = ±0.2mm
All angles 90±0.5 degrees unless specified
IF IN DOUBT - ASK! DO NOT SCALE
Supplier to deburr & remove sharp corners
A3
GLAZINGVISION
Saw Mills RoadDissNorfolkIP22 4RG
Tel: +44 (0)333 8000 881Fax: +44 (0)333 8000 882Email: sales@glazingvision.co.ukWebsite: www.glazingvision.co.uk
IT IS GLAZING VISION'S POLICY TO CONTINUOUSLY DEVELOP AND IMPROVE OUR
PRODUCTS. WE THEREFORE RESERVE THE RIGHT TO MODIFY OR CHANGE THE
DETAIL DESIGN AT OUR DISCRETION AND WITHOUT PRIOR NOTICE.THIS
DRAWING IS COPYRIGHT AND THE SOLE PROPERTY OF GLAZING VISION LTD. THE
DESIGNS/INFORMATION IT CONTAINS ARE PRIVATE AND CONFIDENTIAL. IT MUST
NOT BE COPIED,EXHIBITED OR COMMUNICATED TO THIRD PARTIES FOR ANY
PURPOSE OTHER THAN THAT FOR WHICH IT WAS ISSUED WITHOUT THE WRITTEN
PERMISSION OF GLAZING VISION LTD.
Revision DescriptionRev Drawn/Date Product:
Description:
Materials:
Finish:
Weight:
Quantity:
Scale:
Drawn By:
Drawn Date:
Drawing No:
Check Date:
Checked By:
Fully-weathered structural
3-wall kerb and internal
finishes (by others)
(Example decking)
VIEW NOT TO SCALE
Wall sealing surface -
no steps or undulations
exceeding 5mm
Flat top sealing surface -
No steps or undulations
exceeding 2mm
Kerb and wall structure must be load-bearing.
Stud walls acceptable but stud location
must be suitable for frame fixing.
206.0
88.025mm
*This dimension is dependent on the KERB SPAN and HEIGHT.
Struct kerb thickness
100mm MINIMUM
Kerb Span 1219 mm
includes all weathering finishes
150mm MINIMUM
kerb height
110mm MINIMUM
for subframe*Minimum Wall Height : 1544 mmKerb Width : 4039mm
Page 2 of 2
3-Wall Box - 3WB
As above
Scratch and shell free
N/A
1
NTS
System
29-May-2018
K-117205-RL2C-01
C Product updated
This is a computer generated drawing
Order item ref: RL2
29-05-2018
08/23/2018