The URL can be used to link to this page

Home My WebLink AboutFile Documents.401 Castle Creek Rd.0024.2019 (131).ACBKDetailed, RFIs Grouped by RFI Number Request for Information 093 Aspen Ambulance District Facility FCI Constructors, Inc. - GJProject # 10-17-033 Aspen, CO 81611 Tel: 970-434-9093 Fax: 970-434-7583 RFI #: 093 Date Created: 3/19/2019 Author Company Authored ByAnswer Company Answered By Chamberlin Architects, Inc. Jonathan West FCI Constructors, Inc. - GJ Sam Meeks 437 Main Street Grand Junction, CO 81501 P. O. Box 1767 Grand Junction, CO 81502 Co-Respondent Author RFI Number DisciplineSubject Category ConfirmationCivilSite Concrete Sealer Company Name Contact Name Copies NotesCc: FCI Constructors, Inc. - GJ Brady Blackmer 1 FCI Constructors, Inc. - GJ Brian Young 1 FCI Constructors, Inc. - GJ Javier Garcia 1 FCI Constructors, Inc. - GJ Steve Jones 1 Question Date Required: 3/26/2019 Please refer to attached. Per the landscape drawings and email correspondence between Jonathan West with Chamberlin and Sam Meeks with FCI, all of the exterior site concrete that is new with the building is to be sealed after it is poured. The product that was specified for the concrete sealer requires a 28 day cure time. Per discussion during the 3/19/19 OAC Meeting, it was confirmed that a Cure & Seal product can be used after the concrete has been poured in lieu of the specified product that has to be applied 28 days after it is poured. Suggestion Answer Date Answered: This RFI is for confirmation only. No response is required. Prolog Manager Printed on: 3/19/2019 FCI_Integration Page 1 TECHNICAL DATA SHEET ® ® Visit www.daytonsuperior.com for the most up to date technical information Cures & SealsSec 4 4-5 DESCRIPTION Cure & Seal 25% J22UV is an acrylic copolymer cure, seal and dustproofing compound in an aromatic solvent containing 25% solids with special U.V. stabilizers. The higher acrylic solids content will form an excellent surface coating with a high gloss finish and will provide an outstanding cure performance. Cure & Seal 25% J22UV is ultraviolet light stable and resists yellowing. USE Cure & Seal 25% J22UV provides a combination curing, sealing and dustproofing for freshly finished concrete surfaces. It meets the ASTM C-309 & ASTM C-1315 specifications as an outstanding curing compound and is an excellent dustproofer and surface sealer. FEATURES ■High Solids content ■Cures (Meets ASTM C-309) ■Cure & Seals (Meets ASTM C-1315) ■Dustproofs ■Forms a Clear Film ■U.V. Stable, Resists Yellowing PROPERTIES ASTM C-309, Type 1, Classes A & B ASTM C-1315, Type 1, Class A AASHTO M-148, Type 1, Classes A & B USDA Accepted for Incidental Food Contact Note: Federal Specification TT-C-800A was cancelled and officially replaced by ASTM C-309. Moisture Retention: ASTM C156: <0.40 kg/sq m in 72 hours Drying Time: Approx. 2 hours at 70°F (21°C) for recoating or light traffic. Wait 12 hours for heavy traffic. Dry time is temperature, humidity and wind dependent VOC: Complies with U.S. EPA requirement with less than 700 g/L ESTIMATING GUIDE Coverage: Sq. Ft./Gallon Sq M/ Liter Curing 200 – 400 4.9 – 9.8 Second Coat 400 – 600 9.8 – 14.7 Texture and absorption of surface will influence final coverage rates. PACKAGING ITEM # PACKAGE SIZE Gallons Liters 69445 Pail 5 18.93 69444 Drum 55 208.20 STORAGE Cure & Seal 25% J22UV should be stored in tightly sealed original factory containers. Store in a horizontal position to prevent moisture accumulation on the drum head. Shelf life of properly stored, unopened containers is 24 months. APPLICATION Placement: Apply Cure & Seal 25% J22UV immediately after all surface water has disappeared and the surface cannot be marred. Application of Cure & Seal 25% J22UV too early or too late can affect the overall curing performance. Use low pressure spray, roller or brush. Make sure that the sprayer, as well as any other equipment that the material will come into contact with is clean and dry. Do not contaminate the Cure & Seal 25% J22UV with other materials, solvents, or water. Do not thin. Apply uniformly without puddles. CLEAN UP Tools & Equipment use: Clean tools and equipment with Xylol or lacquer thinner while product is still wet. Dried material may be removed with Green Bean Clean. LIMITATIONS FOR PROFESSIONAL USE ONLY For applications of a cure and seal in an enclosed structure, Dayton Superior recommends a water based product like the Cure & Seal 309 EF or Cure & Seal 1315 EF. Do not apply at temperatures below 40°F (4°C) or when the average daily temperature remains below 40°F (4°C). Sprayers and equipment must have suitable type solvent- resistant hoses and gaskets. Do not apply concrete or mortar toppings over sealed surfaces. Remove Cure & Seal 25% J22UV with Citrus Cleaner J48 or Green Bean Clean® before applying resinous (epoxy, polyester, urethanes, etc.) coatings. Do not store food containers directly on the floor, always place on pallets. Cure & Seal 25% J22UV Solvent Based Cure & Seal 4/10/12 • Page 1 of 2 ® ® TECHNICAL DATA SHEET CONTINUED Cures & SealsSec 4 4-6 Visit www.daytonsuperior.com for the most up to date technical information 4/10/12 • Page 2 of 2 PRECAUTIONS READ MSDS PRIOR TO USING PRODUCT ■ Keep material and containers away from high heat, open flames, sparks or other sources of ignition ■Use with adequate ventilation ■ Wear protective clothing, gloves and eye protection (Goggles, Safety Glasses and/or Face Shield) ■Keep out of the reach of children ■Do not take internally ■In case of ingestion, seek medical help immediately ■ May cause skin irritation upon contact, especially prolonged or repeated. If skin contact occurs, wash immediately with soap and water and seek medical help as needed ■ If eye contact occurs, flush immediately with clean water and seek medical help as needed ■ Dispose of waste material in accordance with federal, state and local requirements Cure & Seal 25% J22UV Solvent Based Cure & Seal MANUFACTURER Dayton Superior Corporation 1125 Byers Road Miamisburg, OH 45342 Customer Service: 888-977-9600 Technical Services: 866-329-8724 Website: www.daytonsuperior.com WARRANTY Dayton Superior Corporation (“Dayton”) warrants for 12 months from the date of manufacture or for the duration of the published product shelf life, whichever is less, that at the time of shipment by Dayton, the product is free of manufacturing defects and conforms to Dayton’s product properties in force on the date of acceptance by Dayton of the order. Dayton shall only be liable under this warranty if the product has been applied, used, and stored in accordance with Dayton’s instructions, especially surface preparation and installation, in force on the date of acceptance by Dayton of the order. The purchaser must examine the product when received and promptly notify Dayton in writing of any non-conformity before the product is used and no later than 30 days after such non-conformity is first discovered. If Dayton, in its sole discretion, determines that the product breached the above warranty, it will, in its sole discretion, replace the non-conforming product, refund the purchase price or issue a credit in the amount of the purchase price. This is the sole and exclusive remedy for breach of this warranty. Only a Dayton officer is authorized to modify this warranty. The information in this data sheet supersedes all other sales information received by the customer during the sales process. THE FOREGOING WARRANTY SHALL BE EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, AND ALL OTHER WARRANTIES OTHERWISE ARISING BY OPERATION OF LAW, COURSE OF DEALING, CUSTOM, TRADE OR OTHERWISE. Dayton shall not be liable in contract or in tort (including, without limitation, negligence, strict liability or otherwise) for loss of sales, revenues or profits; cost of capital or funds; business interruption or cost of downtime, loss of use, damage to or loss of use of other property (real or personal); failure to realize expected savings; frustration of economic or business expectations; claims by third parties (other than for bodily injury), or economic losses of any kind; or for any special, incidental, indirect, consequential, punitive or exemplary damages arising in any way out of the performance of, or failure to perform, its obligations under any contract for sale of product, even if Dayton could foresee or has been advised of the possibility of such damages. The Parties expressly agree that these limitations on damages are allocations of risk constituting, in part, the consideration for this contract, and also that such limitations shall survive the determination of any court of competent jurisdiction that any remedy provided in these terms or available at law fails of its essential purpose.