HomeMy WebLinkAboutFile Documents.119 S Spring St.0061.2019 (8).ACBK
GenFast™ 3” Round Insulation Plate
3/2010 Single Ply Solutions for Over a Quarter Century™ 1
PRODUCT DATA SHEET
250 West 96th Street, Suite 150, Indianapolis, IN 46260
800-443-4272 • www.genflex.com
DESCRIPTION
GenFast™ Insulation Plates are specifically designed to be
used with GenFast™ #12, #14, #15 and CD-10 Concrete
Fasteners in roofing applications for attaching insulation as
required by current GenFlex Technical Specifications.
PHYSICAL PROPERTIES
PROPERTY MINIMUM PERFORMANCE
Material Galvalume®
Material Thickness 0.017” to 0.023”
(0.43 mm to 0.58 mm)
Corrosion Coating AZ – 55; Exceeds FM 4470
Criteria
Pull-Through
Resistance
400 lb (181.4 kg) from center hole
Plate Shape 3” (76.2 mm) Round
Galvalume® is a registered trademark of BIEC
International, Inc.
INSTALLATION
GenFast Insulation Plates should be positioned over the
insulation with the ribbed side up and attached to the roof
deck using the appropriate GenFast™ Fastener as
specified in current GenFlex Technical Specifications and
Details.
INSTALLATION PRECAUTIONS
• Eye protection must be worn during installation of the
insulation plates to prevent injury.
• Care should be used when handling and or transporting
buckets of plates.
• Insulation plates are manufactured from Galvalume metal.
Precautions should be taken to avoid metal slivers when
handling and during installation.
• Overdriving the fastener can cause damage to the plate
and insulation facer.
• Plates are designed to anchor roof insulation only.
• Avoid field seams directly over insulation plates.
PRODUCT DATA
PRODUCT # Qty Weight
W590051020 1,000 42 lb (19 kg) bkt
LEED INFORMATION
Recycled Content
Post Consumer
Post Industrial
8%
17%
STORAGE
Plates should be stored in unopened containers protected
for the weather at all times. If stored out of doors, place on
skids in a dry area, and cover with a breathable tarp.
SHELF LIFE
Not applicable.
PRECAUTIONARY DATA
Eye protection is recommended when installing the
fasteners.
Care should be used when handling and/or transporting
bucket of fasteners.
Overdriving the fasteners can cause damage to the
insulation facer.
Refer to Material Safety Data Sheet for additional
information.