HomeMy WebLinkAboutFile Documents.80 Williams Ranch Dr.0040-2020-BRESPlan review letter 80 Williams Ranch Rd., Permit #0040.2020.BRES BB 853-587-638
Overview of clarifications and additional information:
See notes and answers below
On the framing plan(
Sheet 1 of submittal:
1. Calculate total load total deck load live load for materials dead load for snow and people.
See new files labeled Beam Load & Joist Load for 100# load calculations
2. Identify wood species to verify spans comply to total load.
See Framing Sheet #1
3. Locate and dimension deck support posts and wood species.
See framing Sheet #1 & Sheet #2
4. Dimension and locate guard posts. Install guard posts as detailed in Simpson listing. Locate and
dimension locations for guard posts.
See framing sheets# 2 & 4
Sheet #2 of submittal.
1. Indicate the height above grade (6” min) for the post resting on the BigFoot and Sonotube as
required by R317.1.4 (3).
See note on framing sheet #3
2. Dimension deck height from deck surface to grade.
See note on framing Sheet #3
3. Composite decking to be installed as required by R507.3.
See framing sheets #9-11
Sheet #4 of submittal.
1. Indicate tension required for infill-wires to comply with the 4” maximum opening as required by
R312.4.1.3.
Wires will be installed per manufacturers recommendations. See note on framing sheet #5,
wires will be spaced no more then 3” apart to deal with any potential slack
2. Dimension guard height 36” min R312.1.2.
See framing sheet #5
3. The guard shall be designed to the requirements of R301.5 to resist 200 pounds per linear foot
and the wire 50 pounds per square foot. Reference component specifications Sheet 5 of
submittal for compliance.
See framing sheets #6-8