HomeMy WebLinkAboutFile Documents.210 N Mill St.0016-2019-BROFFax To:Tyler Music
Company:ABC SUPPLY Co #481
17808 E24th Dr
Aurora, CO 80011
Phone #:806-374-7709
Fax #:806-374-1202
Contractor:
General Project Information:
Date Quoted: Revised:
Job Name:
Location:
Job #:
Tapered System Description:Cricket System Description:
Taper Material: ISO - 20 PSI (4' x 4')Cricket Material: ISO - 20 PSI (4' x 4')
Tapered Area (sq): 55.5 Cricket Area (sq): 7.8
Taper Slope: 1/4"/ft Cricket Slope: 1/2"/ft
Taper Fill: ISO - 20 PSI (4' x 4')Cricket Fill: ISO - 20 PSI (4' x 4')
Minimum Start: 1/2"Minimum Start: 1/2"
Maximum Thick: 6 3/4"Maximum Thick: 4 1/4"
Base Layer: BASE LAYER NOT INCLUDED IN QUANTITIES OR PRICE
Overlay: OVERLAY NOT INCLUDED IN QUANTITIES OR PRICE
Non Taper Area (sq): 0 Total ISO Truckloads:0.60
Avg. R-Value:19.50 Total PERLITE Truckloads:0.00
Total Sqs. Applied: 119.46 *Price:
Total Sqs. Material: 131.04 Valid if shipped by:11/16/2019
*Price does not include tax or fuel surcharge (if applicable)
Notes:
10/17/19 10/17/2019
GH-1289238-X1
Aspen, CO
210 N Mill St
$8,566.00
CONTRACTOR APPROVALS.ALL SUBMITTALS ARE SUBJECT TO ARCHITECT / -s DESIGN INTENT IMAGE SHOWN ABOVE REFLECTS ABC'
IMPORTANT - As a supplier of materials only, ABC Supply Co. does not assume responsibility for errors in design, engineering, quantities or dimensions. Architect and/or
contractor shall verify all drain locations, perimeter dimensions, sizes, materials and R-values. Contractor is responsible for verifying this quote to insure that it meets job
specifications. All shop drawings must be approved prior to material shipment.
3 Floridian Dr
Erlanger, KY 41018-1330
Ph / 800-577-1222 (ext. 223
Fax / 866-389-0866
HuttonGlennProject Manager:
E-Mail: glenn.hutton@abcsupply.com
(Page 1 of 2)
Taper Slope: Contractor:0
Minimum: Contractor Approval:
Maximum: Full Size Drawing/Qty:
Cricket Slope: Fax Drawing:
GH-1289238-X1
210 N Mill St
1/4"/ft
1/2"
Aspen, CO
6 3/4"
1/2"/ft
Sumps, Base Layers and/or Overlays are NOT included in this quote. (unless noted otherwise)
CONTRACTOR APPROVALS.ALL SUBMITTALS ARE SUBJECT TO ARCHITECT / -s DESIGN INTENT IMAGE SHOWN ABOVE REFLECTS ABC'
IMPORTANT - As a supplier of materials only, ABC Supply Co. does not assume responsibility for errors in design, engineering, quantities or dimensions. Architect and/or
contractor shall verify all drain locations, perimeter dimensions, sizes, materials and R-values. Contractor is responsible for verifying this quote to insure that it meets job
specifications. All shop drawings must be approved prior to material shipment.
(Page 2 of 2)