HomeMy WebLinkAboutFile Documents.117 S Spring St.0025-2020-BCOM (11)COMcheck Software Version 4.1.1.0
Interior Lighting Compliance Certificate
Project Title:
2015 IECC
Project Type:Alteration
Construction Site:
117 South Spring Street
First Floor
Aspen, CO 81611
Owner/Agent:
Christine Morris
Full Circle Aspen
112 South Mill St. Suite A
Aspen, CO 81611
970.923.3302
christine@fullcircleaspen.com
Designer/Contractor:
Alison See
LS Group
20 Sunset Drive, Unit 9
Basalt, CO 81621
970.927.5133
alison@ls.lighting
Project Information
Energy Code:
Allowed Interior Lighting Power
A
Area Category
B
Floor Area
(ft2)
C
Allowed
Watts / ft2
D
Allowed Watts
(B X C)
1-Retail 1408 1.26 1774
1774Total Allowed Watts =
Proposed Interior Lighting Power
E
(C X D)
D
Fixture
Watt.
A
Fixture ID : Description / Lamp / Wattage Per Lamp / Ballast
B
Lamps/
Fixture
C
# of
Fixtures
Retail (1408 sq.ft.)
A1: A1: 15W LED downlight: Other:1 3 15 45
A2: A2: 16W LED downlight: Other:1 29 15 435
G1: G1: 2x2 LED flat panel: Other:1 6 46 276
U1: U1: LED undercabinet light: Other:1 3 20 60
Z01: Z01: Chandelier: Other:1 1 360 360
Z03: Z03: LED Sconce: Other:1 4 8 32
T1: T1: 6ft track w/ (3) 18W LED heads: Wattage based on 6 feet of track 0 0 180 180
1388Total Proposed Watts =
Interior Lighting Compliance Statement
Compliance Statement: The proposed interior lighting alteration project represented in this document is consistent with the
building plans, specifications, and other calculations submitted with this permit application. The proposed interior lighting
systems have been designed to meet the 2015 IECC requirements in COMcheck Version 4.1.1.0 and to comply with any
applicable mandatory requirements listed in the Inspection Checklist.
Name - Title Signature Date
Interior Lighting PASSES
Project Title:
Data filename:L:\CUSTOMER\Full Circle Aspen LLC\117 S Spring Street\CODE_ENERGY\2020.01.24_117 S Spring
St_IECC 2015 Compliance Check.cck
02/26/20Report date:
51 ofPage
Alison See - Designer 2020.02.26
04/28/2020
05/19/2020
denism
Inspection Checklist
Requirements: 57.0% were addressed directly in the COMcheck software
COMcheck Software Version 4.1.1.0
Text in the "Comments/Assumptions" column is provided by the user in the COMcheck Requirements screen. For each
requirement, the user certifies that a code requirement will be met and how that is documented, or that an exception
is being claimed. Where compliance is itemized in a separate table, a reference to that table is provided.
Energy Code: 2015 IECC
Section
#
& Req.ID
Plan Review Complies?Comments/Assumptions
C103.2
[PR4]1
Plans, specifications, and/or
calculations provide all information
with which compliance can be
determined for the interior lighting
and electrical systems and equipment
and document where exceptions to
the standard are claimed. Information
provided should include interior
lighting power calculations, wattage of
bulbs and ballasts, transformers and
control devices.
Complies
Does Not
Not Observable
Not Applicable
Additional Comments/Assumptions:
1 High Impact (Tier 1)2 Medium Impact (Tier 2)3 Low Impact (Tier 3)
Project Title:
Data filename:L:\CUSTOMER\Full Circle Aspen LLC\117 S Spring Street\CODE_ENERGY\2020.01.24_117 S Spring
St_IECC 2015 Compliance Check.cck
02/26/20Report date:
52 ofPage04/28/2020
Section
#
& Req.ID
Rough-In Electrical Inspection Complies?Comments/Assumptions
C405.2.1
[EL15]1
Lighting controls installed to uniformly
reduce the lighting load by at least
50%.
Complies
Does Not
Not Observable
Not Applicable
Requirement will be met.
C405.2.1
[EL18]1
Occupancy sensors installed in
required spaces.
Complies
Does Not
Not Observable
Not Applicable
Requirement will be met.
C405.2.1,
C405.2.2.
3
[EL23]2
Independent lighting controls installed
per approved lighting plans and all
manual controls readily accessible and
visible to occupants.
Complies
Does Not
Not Observable
Not Applicable
Requirement will be met.
C405.2.2.
1
[EL22]2
Automatic controls to shut off all
building lighting installed in all
buildings.
Complies
Does Not
Not Observable
Not Applicable
Requirement will be met.
C405.2.3
[EL16]2
Daylight zones provided with
individual controls that control the
lights independent of general area
lighting.
Complies
Does Not
Not Observable
Not Applicable
Requirement will be met.
C405.2.3,
C405.2.3.
1,
C405.2.3.
2
[EL20]1
Primary sidelighted areas are
equipped with required lighting
controls.
Complies
Does Not
Not Observable
Not Applicable
Requirement will be met.
C405.2.3,
C405.2.3.
1,
C405.2.3.
3
[EL21]1
Enclosed spaces with daylight area
under skylights and rooftop monitors
are equipped with required lighting
controls.
Complies
Does Not
Not Observable
Not Applicable
Exception: Requirement does not apply.
C405.2.4
[EL4]1
Separate lighting control devices for
specific uses installed per approved
lighting plans.
Complies
Does Not
Not Observable
Not Applicable
Requirement will be met.
C405.2.4
[EL8]1
Additional interior lighting power
allowed for special functions per the
approved lighting plans and is
automatically controlled and
separated from general lighting.
Complies
Does Not
Not Observable
Not Applicable
C405.3
[EL6]1
Exit signs do not exceed 5 watts per
face.
Complies
Does Not
Not Observable
Not Applicable
Additional Comments/Assumptions:
1 High Impact (Tier 1)2 Medium Impact (Tier 2)3 Low Impact (Tier 3)
Project Title:
Data filename:L:\CUSTOMER\Full Circle Aspen LLC\117 S Spring Street\CODE_ENERGY\2020.01.24_117 S Spring
St_IECC 2015 Compliance Check.cck
02/26/20Report date:
53 ofPage04/28/2020
Section
#
& Req.ID
Final Inspection Complies?Comments/Assumptions
C303.3,
C408.2.5.
2
[FI17]3
Furnished O&M instructions for
systems and equipment to the
building owner or designated
representative.
Complies
Does Not
Not Observable
Not Applicable
C405.4.1
[FI18]1
Interior installed lamp and fixture
lighting power is consistent with what
is shown on the approved lighting
plans, demonstrating proposed watts
are less than or equal to allowed
watts.
Complies
Does Not
Not Observable
Not Applicable
See the Interior Lighting fixture schedule for values.
C408.2.5.
1
[FI16]3
Furnished as-built drawings for
electric power systems within 90 days
of system acceptance.
Complies
Does Not
Not Observable
Not Applicable
C408.3
[FI33]1
Lighting systems have been tested to
ensure proper calibration, adjustment,
programming, and operation.
Complies
Does Not
Not Observable
Not Applicable
Additional Comments/Assumptions:
1 High Impact (Tier 1)2 Medium Impact (Tier 2)3 Low Impact (Tier 3)
Project Title:
Data filename:L:\CUSTOMER\Full Circle Aspen LLC\117 S Spring Street\CODE_ENERGY\2020.01.24_117 S Spring
St_IECC 2015 Compliance Check.cck
02/26/20Report date:
54 ofPage04/28/2020
Project Title:
Data filename:L:\CUSTOMER\Full Circle Aspen LLC\117 S Spring Street\CODE_ENERGY\2020.01.24_117 S Spring
St_IECC 2015 Compliance Check.cck
02/26/20Report date:
55 ofPage04/28/2020