Loading...
HomeMy WebLinkAboutFile Documents.117 S Spring St.0025-2020-BCOM (12)Photometric performance is measured in accordance with IESNA LM-79. Visit focalpointlights.com for complete photometric data. Visit energystar.gov for model specifics. Focal Point LLC | 4141 S. Pulaski Rd, Chicago, IL 60632 | 773.247.9494 | focalpointlights.com | @focalpointlight ID+ 3.5" LED DOWNLIGHT DIMENSIONAL DATA FEATURES PRODUCT OVERVIEW PERFORMANCE December 2019 P Lumen Output: 700-1500lm Wattage: 9-20W LPW: 79-92 SDCM: 2 Less than 2.64" low profile housing available. Field adjustability of ceiling thickness from 0.5" - 1.5". 50˚, 60˚ and 75˚ cut-off reflector options available. Outdoor rating permits use in outdoor covered ceiling applications. Solite lens with die-cast trim and 70˚ or 90˚ beam spread options available. Solite lens and trim allows for a coordinated aesthetic with companion ID+ 3.5" Adjustable Accent. Short 60˚ Cut-off, Narrow Flood, Clear Diffuse, 3500K Lumen Output: 1500lm Total System Watts: 20W clear diffuse Solite lens option white painted flange warm diffuse black painted white painted trimless companion 12.88" 327.2mm .500" 2.64" 67.1mm Shallow Housing - 50˚ cut-off reflector Very Shallow Housing - 60˚ and 75˚ cut-off reflectors .500" 3.50" 88.9mm 3.50" 88.9mm 2.64" 67.1mm 12.88" 327.2mm Housing height with DALI, Lutron & LZ1 drivers is 3.0" 10.90" 276.9mm 3.50"88.9mm4.50" 114.6mm 3.16" 80.3mm 4.50" 114.6mm 4.50" 114.6mm A1 04/28/2020 Focal Point LLC reserves the right to change specifications for product improvement without notification. fixture: project: HOUSING DETAILS HOUSING ORDERING Housing Series FLC3D ID+ 3.5" Round FLC3D Trim Type RO Round Overlap RO Lumen Output700 Lumen 700L900 Lumen 900L1100 Lumen 1100L1300 Lumen 1300L1500 Lumen 1500L Voltage120V 120277V277 Control System & Dimming Level 0-10V - 0% Dimming LZ1 0-10V - 1% Dimming L11 0-10V - 10% Dimming LD1Forward Phase LFP(120V only. 900 & 1300 Lumens only.) Lutron Hi-Lume EcoSystem (LDE1) - 1% Dimming LH1(700 &1500 lumens not available.) Lutron 5-Series EcoSystem (LDE5) - 5% Dimming LU5(1300 Lumens only)Lutron Hi-Lume - Forward Phase - 1% Dimming LTE(120V only. 1500 lumens not available.) DALI - 0% Dimming DZ1DALI - 1% Dimming D11 Housing TypeIC Rated / Airtight IC(Available options: L11 & LD1: 700, 900 & 1100 Lumens. LFP: 900 & 1300 Lumens.) Thermally Protected, Non-IC T(Housing height = 3.0" for LZ1, L3D, LH1, LTE, LU5, D11 & DZ1) Factory OptionsBar Hangers BHChicago Plenum CPEmergency Battery -Remote test switch EMR(Not available with CP or IC. Above Ceiling Access.) Outdoor Rated OD(LD1 driver and T-rated housing only. Not available with CP or EMR. See dimming performance table on page 3.) TRIM & LED MODULEAperture LC3 3.5" Round Reflector LC3Trim TypeRound Overlap RORound Die-Cast Overlap RDO(DSS, VWFL & SWFL options only) Lumen Output(Trim & housing output must match)700 Lumen 700L900 Lumen 900L1100 Lumen 1100L1300 Lumen 1300L1500 Lumen 1500L Color Temperature2700K, 80+ CRI or 90+ CRI 27K or 927K 3000K, 80+ CRI or 90+ CRI 30K or 930K 3500K, 80+ CRI or 90+ CRI 35K or 935K 4000K, 80+ CRI or 90+ CRI 40K or 940K OpticTall Cone with 50˚ cut-off DNT Short Cone with 60˚ cut-off DNSSuper Short Cone with Solite Lens 75˚ cut-off DSS(Die-cast trim, RDO, with VWFL or SWFL only) DistributionNarrow Flood NFL Flood FLWide Flood WFLVery Wide Flood VWFL(Die-cast trim, RDO, with DSS Optic only) Super Wide Flood SWFL(Die-cast trim, RDO, with DSS Optic only) ColorClear Diffuse CDWarm Diffuse WD Black BK(Black painted flange only)White WH(White painted flange only) Flange FinishNon-Painted NP(Clear and warm diffuse only) Black Painted BPWhite Painted WP HOUSING SPECIFICATIONS Construction Thermally protected housing for new construction applications. Insulation to be kept 3" away from housing. Type IC inherently protected, suitable for direct contact with insulation. Restrictive airflow per ASTM-E283. Butterfly brackets allow mounting to 1⁄2" emt. Order bar hangers as an accessory. Die–cast aluminum heat sink designed for maximum thermal dissipation. Die-formed housing and integral junction box with (7) 1⁄2" pry outs. Accommodates ceiling thicknesses up to 0.5" standard, field adjustable up to 1.5" thickness. For thicker ceiling consult factory. Fixture will not exceed 5 lb. Electrical Choice of constant current dimming drivers. Power factor > .9 typical. Emergency Emergency Battery Pack: Bodine BSL17C–C2. Emergency output —7W for 90 minutes. Maximum mounting height — DNT & DNS optic: 21.4ft. DSS optic: 15.3ft. Labels UL and cUL Listed. Suitable for Dry, Damp or Wet Locations, indoor use only. Specify Outdoor rated (OD) for outdoor recessed ceiling applications. Lumen Maintenance Reported: L70 at >55,000 hours Calculated: L70 at 420,000 hours L90 at >55,000 hours L90 at 109,000 hours Derived from EPA TM-21 calculator. Based on typical conditions, consult factory for additional data. Reliability At Focal Point, our products are designed to stand the test of time. Each luminaire is engineered using superior components, manufactured with the utmost care and rigorously tested. Contact us for reliability data. Warranty LED System rated for operation in ambient environments up to 25°C. 5-year limited warranty. Fixture with Outdoor rated option must be installed in a covered ceiling and is warrantied for operation in ambient environments between -20˚C to +40˚C. TRIM & LED SPECIFICATIONS LED System Proprietary array incorporates premium LEDs on a robust platform. May be specified in 2700K, 3000K, 3500K or 4000K, CRI>80 or >90. Color accuracy within 2 SDCM. Aluminum heat sink provides appropriate thermal management. Aesthetics Parabolic reflector cone ensures glare free optics. DNT & DNS reflector is .050 spun aluminum. DSS reflector is die-cast aluminum.Trims are self-flanged. Non-painted trim matches reflector finish. Painted flange may also be specified. Optics 50-degree, 60-degree or 75-degree cut–off to light source and its image. Ordering Code Cut-Off Degree Distribution Beam Spread | Spacing Criteria Housing DepthNFLFLWFLVWFLSWFL DNT 50˚26˚ | 0.43 44˚ | 0.67 59˚ | 0.91 --3.16" DNS 60˚24˚ | 0.39 44˚ | 0.67 56˚ | 0.81 --2.64" DSS 75˚---70˚ | 0.91 94˚ | 1.22 2.64" PERFORMANCE TABLE - see page 3. 60˚ & 75˚ - L x W x H 12.88" x 10.90" x 2.64" DALI, Lutron & LZ1 height = 3.0" 50˚ - L x W x H 12.88" x 10.90" x 3.09" 60˚, 50˚ & 75˚ - L x W x H 14.23" x 11.00" x 3.53" T-Rated Housing IC/Chicago Plenum Housing 5 DAY*Options in orange qualify for the Quickship program. 5-day up to 200 pieces. Refer to Quickship Guide for complete details. 04/28/2020 HOUSING ORDERING Housing SeriesFLC3D ID+ 3.5" RoundFLC3D Trim TypeRO Round OverlapRO Lumen Output700 Lumen 700L900 Lumen900L1100 Lumen1100L1300 Lumen1300L1500 Lumen1500L Voltage120V120277V277 Control System & Dimming Level 0-10V - 0% DimmingLZ1 0-10V - 1% DimmingL11 0-10V - 10% DimmingLD1Forward PhaseLFP(120V only. 900 & 1300 Lumens only.) Lutron Hi-Lume EcoSystem (LDE1) - 1% DimmingLH1(700 &1500 lumens not available.) Lutron 5-Series EcoSystem (LDE5) - 5% DimmingLU5(1300 Lumens only)Lutron Hi-Lume - Forward Phase - 1% Dimming LTE(120V only. 1500 lumens not available.) DALI - 0% DimmingDZ1DALI - 1% DimmingD11 Housing TypeIC Rated / AirtightIC(Available options: L11 & LD1: 700, 900 & 1100 Lumens. LFP: 900 & 1300 Lumens.) Thermally Protected, Non-ICT(Housing height = 3.0" for LZ1, L3D, LH1, LTE, LU5, D11 & DZ1) Factory OptionsBar HangersBHChicago PlenumCPEmergency Battery -Remote test switchEMR(Not available with CP or IC. Above Ceiling Access.) Outdoor RatedOD(LD1 driver and T-rated housing only. Not available with CP or EMR. See dimming performance table on page 3.) TRIM & LED MODULEApertureLC3 3.5" Round ReflectorLC3Trim TypeRound OverlapRORound Die-Cast OverlapRDO(DSS, VWFL & SWFL options only) Lumen Output(Trim & housing output must match)700 Lumen 700L900 Lumen900L1100 Lumen1100L1300 Lumen1300L1500 Lumen1500L Color Temperature2700K, 80+ CRI or 90+ CRI27K or 927K 3000K, 80+ CRI or 90+ CRI30K or 930K 3500K, 80+ CRI or 90+ CRI35K or 935K 4000K, 80+ CRI or 90+ CRI40K or 940K OpticTall Cone with 50˚ cut-offDNT Short Cone with 60˚ cut-offDNSSuper Short Cone with Solite Lens 75˚ cut-offDSS(Die-cast trim, RDO, with VWFL or SWFL only) DistributionNarrow FloodNFL FloodFLWide FloodWFLVery Wide FloodVWFL(Die-cast trim, RDO, with DSS Optic only) Super Wide FloodSWFL(Die-cast trim, RDO, with DSS Optic only) ColorClear DiffuseCDWarm DiffuseWD BlackBK(Black painted flange only)WhiteWH(White painted flange only) Flange FinishNon-PaintedNP(Clear and warm diffuse only) Black PaintedBPWhite PaintedWP Lumen Output Delivered Lumens System Watts LPW 700L 791 9 92 900L 964 11 90 1100L 1196 15 79 1300L 1392 18 79 1500L 1587 20 79 Based on Trimless, Short Cone, 3500K, 80CRI, Wide Flood, Clear Diffuse. Delivered lumen output may vary +/- 5%. Actual wattage may vary +/- 5% Lumen Output Minimum Dimming Level 700L 37% 900L 29% 1100L 23% 1300L 19% 1500L 17% ROUND DOWNLIGHT PERFORMANCE TABLE OUTDOOR RATED (OD) DRIVER DIMMING PERFORMANCE TABLE ROUND DOWNLIGHT LUMEN MULTIPLIER TABLE How To Use Lumen Multipliers Formula: (Lumen Output Value) x (Color Temperature & CRI) x (Distribution) x (Color) Example: LC3-RO-1100L-935K-DNS-FL-WH (1100) x (0.81) x (1.05) x (1.01) ≈ 945 lm (estimated delivered lumens) Color Temperature & CRI Trim Type Optic Color Temperature Multiplier ALL ALL 2700K, 80+ CRI [27K]0.93 2700K, 90+ CRI [927K]0.75 3000K, 80+ CRI [30K]0.93 3000K, 90+ CRI [930K]0.81 3500K, 80+ CRI [35K]1.00 3500K, 90+ CRI [935K]0.81 4000K, 80+ CRI [40K]1.00 4000K, 90+ CRI [940K]0.87 Distribution Trim Type Optic Distribution Multiplier Round Trimless [RT] Tall Cone with 50˚ cut-off [DNT] Narrow Flood [NFL] 0.99 Flood [FL] 1.01 Wide Flood [WFL] 0.98 Short Cone with 60˚ cut-off [DNS] Narrow Flood [NFL] 1.02 Flood [FL] 1.05 Wide Flood [WFL] 1.06 Round Overlap [RO] Tall Cone with 50˚ cut-off [DNT] Narrow Flood [NFL] 0.96 Flood [FL] 0.90 Wide Flood [WFL] 0.96 Short Cone with 60˚ cut-off [DNS] Narrow Flood [NFL] 1.02 Flood [FL] 1.01 Wide Flood [WFL] 0.95 Round Die-Cast Trimless [RDT]Super Short Cone with Solite Lens with 75˚ cut-off [DSS] Very Wide Flood [VWFL]0.92 Super Wide Flood [SWFL]0.85 Round Die-Cast Overlap [RDO]Super Short Cone with Solite Lens with 75˚ cut-off [DSS] Very Wide Flood [VWFL]0.84 Super Wide Flood [SWFL]0.79 Color Trim Type Optic Color Multiplier Round Trimless [RT] and Round Overlap [RO] Tall Cone with 50˚ cut-off [DNT]andShort Cone with 60˚ cut-off [DNS] Clear Diffuse [CD]1.00 Warm Diffuse [WD]1.03 White [WH]1.16 Black [BK]0.79 Round Die-Cast Trimless [RDT] and Round Die-Cast Overlap [RDO] Super Short Cone with Solite Lens with 75˚ cut-off [DSS] Clear Diffuse [CD]1.00 Warm Diffuse [WD]0.97 White [WH]1.15 Black [BK]0.86 Multiplier charts are provided to aid with estimation of lumen levels across options. Apply multipliers against ordered Lumen Output to estimate Delivered Lumens. An estimation should make use of all tables through consecutive application of three multipliers. Refer to IES files for most accurate photometric information 04/28/2020 Photometric performance is measured in accordance with IESNA LM-79. Visit focalpointlights.com for complete photometric data. Visit energystar.gov for model specifics. Focal Point LLC | 4141 S. Pulaski Rd, Chicago, IL 60632 | 773.247.9494 | focalpointlights.com | @focalpointlight ID+ 3.5" LED DOWNLIGHT DIMENSIONAL DATA FEATURES PRODUCT OVERVIEW PERFORMANCE December 2019 P Lumen Output: 700-1500lm Wattage: 9-20W LPW: 79-92 SDCM: 2 Less than 2.64" low profile housing available. Field adjustability of ceiling thickness from 0.5" - 1.5". 50˚, 60˚ and 75˚ cut-off reflector options available. Outdoor rating permits use in outdoor covered ceiling applications. Solite lens with die-cast trim and 70˚ or 90˚ beam spread options available. Solite lens and trim allows for a coordinated aesthetic with companion ID+ 3.5" Adjustable Accent. Short 60˚ Cut-off, Narrow Flood, Clear Diffuse, 3500K Lumen Output: 1500lm Total System Watts: 20W clear diffuse Solite lens option white painted flange warm diffuse black painted white painted trimless companion 12.88" 327.2mm .500" 2.64" 67.1mm Shallow Housing - 50˚ cut-off reflector Very Shallow Housing - 60˚ and 75˚ cut-off reflectors .500" 3.50" 88.9mm 3.50" 88.9mm 2.64" 67.1mm 12.88" 327.2mm Housing height with DALI, Lutron & LZ1 drivers is 3.0" 10.90" 276.9mm 3.50"88.9mm4.50" 114.6mm 3.16" 80.3mm 4.50" 114.6mm 4.50" 114.6mm A2 04/28/2020 Focal Point LLC reserves the right to change specifications for product improvement without notification. fixture: project: HOUSING DETAILS HOUSING ORDERING Housing Series FLC3D ID+ 3.5" Round FLC3D Trim Type RO Round Overlap RO Lumen Output700 Lumen 700L900 Lumen 900L1100 Lumen 1100L1300 Lumen 1300L1500 Lumen 1500L Voltage120V 120277V277 Control System & Dimming Level 0-10V - 0% Dimming LZ1 0-10V - 1% Dimming L11 0-10V - 10% Dimming LD1Forward Phase LFP(120V only. 900 & 1300 Lumens only.) Lutron Hi-Lume EcoSystem (LDE1) - 1% Dimming LH1(700 &1500 lumens not available.) Lutron 5-Series EcoSystem (LDE5) - 5% Dimming LU5(1300 Lumens only)Lutron Hi-Lume - Forward Phase - 1% Dimming LTE(120V only. 1500 lumens not available.) DALI - 0% Dimming DZ1DALI - 1% Dimming D11 Housing TypeIC Rated / Airtight IC(Available options: L11 & LD1: 700, 900 & 1100 Lumens. LFP: 900 & 1300 Lumens.) Thermally Protected, Non-IC T(Housing height = 3.0" for LZ1, L3D, LH1, LTE, LU5, D11 & DZ1) Factory OptionsBar Hangers BHChicago Plenum CPEmergency Battery -Remote test switch EMR(Not available with CP or IC. Above Ceiling Access.) Outdoor Rated OD(LD1 driver and T-rated housing only. Not available with CP or EMR. See dimming performance table on page 3.) TRIM & LED MODULEAperture LC3 3.5" Round Reflector LC3Trim TypeRound Overlap RORound Die-Cast Overlap RDO(DSS, VWFL & SWFL options only) Lumen Output(Trim & housing output must match)700 Lumen 700L900 Lumen 900L1100 Lumen 1100L1300 Lumen 1300L1500 Lumen 1500L Color Temperature2700K, 80+ CRI or 90+ CRI 27K or 927K 3000K, 80+ CRI or 90+ CRI 30K or 930K 3500K, 80+ CRI or 90+ CRI 35K or 935K 4000K, 80+ CRI or 90+ CRI 40K or 940K OpticTall Cone with 50˚ cut-off DNT Short Cone with 60˚ cut-off DNSSuper Short Cone with Solite Lens 75˚ cut-off DSS(Die-cast trim, RDO, with VWFL or SWFL only) DistributionNarrow Flood NFL Flood FLWide Flood WFLVery Wide Flood VWFL(Die-cast trim, RDO, with DSS Optic only) Super Wide Flood SWFL(Die-cast trim, RDO, with DSS Optic only) ColorClear Diffuse CDWarm Diffuse WD Black BK(Black painted flange only)White WH(White painted flange only) Flange FinishNon-Painted NP(Clear and warm diffuse only) Black Painted BPWhite Painted WP HOUSING SPECIFICATIONS Construction Thermally protected housing for new construction applications. Insulation to be kept 3" away from housing. Type IC inherently protected, suitable for direct contact with insulation. Restrictive airflow per ASTM-E283. Butterfly brackets allow mounting to 1⁄2" emt. Order bar hangers as an accessory. Die–cast aluminum heat sink designed for maximum thermal dissipation. Die-formed housing and integral junction box with (7) 1⁄2" pry outs. Accommodates ceiling thicknesses up to 0.5" standard, field adjustable up to 1.5" thickness. For thicker ceiling consult factory. Fixture will not exceed 5 lb. Electrical Choice of constant current dimming drivers. Power factor > .9 typical. Emergency Emergency Battery Pack: Bodine BSL17C–C2. Emergency output —7W for 90 minutes. Maximum mounting height — DNT & DNS optic: 21.4ft. DSS optic: 15.3ft. Labels UL and cUL Listed. Suitable for Dry, Damp or Wet Locations, indoor use only. Specify Outdoor rated (OD) for outdoor recessed ceiling applications. Lumen Maintenance Reported: L70 at >55,000 hours Calculated: L70 at 420,000 hours L90 at >55,000 hours L90 at 109,000 hours Derived from EPA TM-21 calculator. Based on typical conditions, consult factory for additional data. Reliability At Focal Point, our products are designed to stand the test of time. Each luminaire is engineered using superior components, manufactured with the utmost care and rigorously tested. Contact us for reliability data. Warranty LED System rated for operation in ambient environments up to 25°C. 5-year limited warranty. Fixture with Outdoor rated option must be installed in a covered ceiling and is warrantied for operation in ambient environments between -20˚C to +40˚C. TRIM & LED SPECIFICATIONS LED System Proprietary array incorporates premium LEDs on a robust platform. May be specified in 2700K, 3000K, 3500K or 4000K, CRI>80 or >90. Color accuracy within 2 SDCM. Aluminum heat sink provides appropriate thermal management. Aesthetics Parabolic reflector cone ensures glare free optics. DNT & DNS reflector is .050 spun aluminum. DSS reflector is die-cast aluminum.Trims are self-flanged. Non-painted trim matches reflector finish. Painted flange may also be specified. Optics 50-degree, 60-degree or 75-degree cut–off to light source and its image. Ordering Code Cut-Off Degree Distribution Beam Spread | Spacing Criteria Housing DepthNFLFLWFLVWFLSWFL DNT 50˚26˚ | 0.43 44˚ | 0.67 59˚ | 0.91 --3.16" DNS 60˚24˚ | 0.39 44˚ | 0.67 56˚ | 0.81 --2.64" DSS 75˚---70˚ | 0.91 94˚ | 1.22 2.64" PERFORMANCE TABLE - see page 3. 60˚ & 75˚ - L x W x H 12.88" x 10.90" x 2.64" DALI, Lutron & LZ1 height = 3.0" 50˚ - L x W x H 12.88" x 10.90" x 3.09" 60˚, 50˚ & 75˚ - L x W x H 14.23" x 11.00" x 3.53" T-Rated Housing IC/Chicago Plenum Housing 5 DAY*Options in orange qualify for the Quickship program. 5-day up to 200 pieces. Refer to Quickship Guide for complete details. -KIT 04/28/2020 HOUSING ORDERING Housing SeriesFLC3D ID+ 3.5" RoundFLC3D Trim TypeRO Round OverlapRO Lumen Output700 Lumen 700L900 Lumen900L1100 Lumen1100L1300 Lumen1300L1500 Lumen1500L Voltage120V120277V277 Control System & Dimming Level 0-10V - 0% DimmingLZ1 0-10V - 1% DimmingL11 0-10V - 10% DimmingLD1Forward PhaseLFP(120V only. 900 & 1300 Lumens only.) Lutron Hi-Lume EcoSystem (LDE1) - 1% DimmingLH1(700 &1500 lumens not available.) Lutron 5-Series EcoSystem (LDE5) - 5% DimmingLU5(1300 Lumens only)Lutron Hi-Lume - Forward Phase - 1% Dimming LTE(120V only. 1500 lumens not available.) DALI - 0% DimmingDZ1DALI - 1% DimmingD11 Housing TypeIC Rated / AirtightIC(Available options: L11 & LD1: 700, 900 & 1100 Lumens. LFP: 900 & 1300 Lumens.) Thermally Protected, Non-ICT(Housing height = 3.0" for LZ1, L3D, LH1, LTE, LU5, D11 & DZ1) Factory OptionsBar HangersBHChicago PlenumCPEmergency Battery -Remote test switchEMR(Not available with CP or IC. Above Ceiling Access.) Outdoor RatedOD(LD1 driver and T-rated housing only. Not available with CP or EMR. See dimming performance table on page 3.) TRIM & LED MODULEApertureLC3 3.5" Round ReflectorLC3Trim TypeRound OverlapRORound Die-Cast OverlapRDO(DSS, VWFL & SWFL options only) Lumen Output(Trim & housing output must match)700 Lumen 700L900 Lumen900L1100 Lumen1100L1300 Lumen1300L1500 Lumen1500L Color Temperature2700K, 80+ CRI or 90+ CRI27K or 927K 3000K, 80+ CRI or 90+ CRI30K or 930K 3500K, 80+ CRI or 90+ CRI35K or 935K 4000K, 80+ CRI or 90+ CRI40K or 940K OpticTall Cone with 50˚ cut-offDNT Short Cone with 60˚ cut-offDNSSuper Short Cone with Solite Lens 75˚ cut-offDSS(Die-cast trim, RDO, with VWFL or SWFL only) DistributionNarrow FloodNFL FloodFLWide FloodWFLVery Wide FloodVWFL(Die-cast trim, RDO, with DSS Optic only) Super Wide FloodSWFL(Die-cast trim, RDO, with DSS Optic only) ColorClear DiffuseCDWarm DiffuseWD BlackBK(Black painted flange only)WhiteWH(White painted flange only) Flange FinishNon-PaintedNP(Clear and warm diffuse only) Black PaintedBPWhite PaintedWP Lumen Output Delivered Lumens System Watts LPW 700L 791 9 92 900L 964 11 90 1100L 1196 15 79 1300L 1392 18 79 1500L 1587 20 79 Based on Trimless, Short Cone, 3500K, 80CRI, Wide Flood, Clear Diffuse. Delivered lumen output may vary +/- 5%. Actual wattage may vary +/- 5% Lumen Output Minimum Dimming Level 700L 37% 900L 29% 1100L 23% 1300L 19% 1500L 17% ROUND DOWNLIGHT PERFORMANCE TABLE OUTDOOR RATED (OD) DRIVER DIMMING PERFORMANCE TABLE ROUND DOWNLIGHT LUMEN MULTIPLIER TABLE How To Use Lumen Multipliers Formula: (Lumen Output Value) x (Color Temperature & CRI) x (Distribution) x (Color) Example: LC3-RO-1100L-935K-DNS-FL-WH (1100) x (0.81) x (1.05) x (1.01) ≈ 945 lm (estimated delivered lumens) Color Temperature & CRI Trim Type Optic Color Temperature Multiplier ALL ALL 2700K, 80+ CRI [27K]0.93 2700K, 90+ CRI [927K]0.75 3000K, 80+ CRI [30K]0.93 3000K, 90+ CRI [930K]0.81 3500K, 80+ CRI [35K]1.00 3500K, 90+ CRI [935K]0.81 4000K, 80+ CRI [40K]1.00 4000K, 90+ CRI [940K]0.87 Distribution Trim Type Optic Distribution Multiplier Round Trimless [RT] Tall Cone with 50˚ cut-off [DNT] Narrow Flood [NFL] 0.99 Flood [FL] 1.01 Wide Flood [WFL] 0.98 Short Cone with 60˚ cut-off [DNS] Narrow Flood [NFL] 1.02 Flood [FL] 1.05 Wide Flood [WFL] 1.06 Round Overlap [RO] Tall Cone with 50˚ cut-off [DNT] Narrow Flood [NFL] 0.96 Flood [FL] 0.90 Wide Flood [WFL] 0.96 Short Cone with 60˚ cut-off [DNS] Narrow Flood [NFL] 1.02 Flood [FL] 1.01 Wide Flood [WFL] 0.95 Round Die-Cast Trimless [RDT]Super Short Cone with Solite Lens with 75˚ cut-off [DSS] Very Wide Flood [VWFL]0.92 Super Wide Flood [SWFL]0.85 Round Die-Cast Overlap [RDO]Super Short Cone with Solite Lens with 75˚ cut-off [DSS] Very Wide Flood [VWFL]0.84 Super Wide Flood [SWFL]0.79 Color Trim Type Optic Color Multiplier Round Trimless [RT] and Round Overlap [RO] Tall Cone with 50˚ cut-off [DNT]andShort Cone with 60˚ cut-off [DNS] Clear Diffuse [CD]1.00 Warm Diffuse [WD]1.03 White [WH]1.16 Black [BK]0.79 Round Die-Cast Trimless [RDT] and Round Die-Cast Overlap [RDO] Super Short Cone with Solite Lens with 75˚ cut-off [DSS] Clear Diffuse [CD]1.00 Warm Diffuse [WD]0.97 White [WH]1.15 Black [BK]0.86 Multiplier charts are provided to aid with estimation of lumen levels across options. Apply multipliers against ordered Lumen Output to estimate Delivered Lumens. An estimation should make use of all tables through consecutive application of three multipliers. Refer to IES files for most accurate photometric information 04/28/2020 1 www.utopialightingus.com UTOPIA LIGHTING reserves the right to change specifications, drawings, dimensions without prior notice. Visit our website for the latest product information. LED EDGE-LIT PANEL ULP FEATURES: • The external driver ensures steady performance and long lifetime. • Aluminum with white powder coated finish. • Slim profile and low weight design. • White finished. • Impact resistent frosted lens. LED: • Color Temperature: 3000(no DLC)/3500/4000/5000 (K). • LED Module: High efficiency up to 105 LPW. • CRI: Ra>80. • Service life: Greater than 100,000 hours minimizing maintenance frequency. • LM79. • LM80. ELECTRICAL: • High power factor electronic driver, operate from a 120~277 Vac input range, 50 / 60 Hz. • Short circuit protection. • 0-10V Dimming. (1%-100%, 5%-100%) • To find an approved dimmer switch, please see table1. • Power Factor: >0.9 • THD: <20% • Ambient Operating Temperature: -4°F (-20°C) ~ 122°F (50°C). • <ELCU-200> • Guarantees emergency lighting remains ON or is turned on when power to the control device is lost. • Interfaces with fire alarm panel or security system. • “Watchdog” feature allows emergency loads to be controlled in tandem with normal power loads. • UL listed for use in emergency circuits. LISTING: • DLC standard listed 3500/4000/5000 (K) only. (Customized wattage will not be DLC listed) • UL listed. • UL 1598 suitable for damp locations, Type IC. • UL 8750 LED equipment in lighting products. • 5 year warranty. • Suitable for damp location, Type IC. • RoHS. • 100,000+ hours per L70 TM-21 at 158°F (70°C). APPLICATION The design of the panels produces even, consistent shadowless light. The LEDs enable long life, high lumen maintenance, and are low maintenance and constructed without hazardous materials. The LED panel series is designed to lay in drop ceilings in office, schools, and healthcare applications. Revised: 10.11.2019 Size LED Watts Lumen Output Lumen Efficiency 1’ x 4’40W 4200 lm 105 lm/W2’ x 2’40W 4200 lm 2’ x 4’46W 4830 lm Size Max LED Watts 1’ x 4’40W 2’ x 2’46W 2’ x 4’65W CONFIGURATIONS CUSTOMIZE ULP-14-40LED ULP-22-40LED ULP-24-46LED DIMMING DOWN TO5% Multiplier Size 3000K 3500K 5000K 1’ x 4’0.86089 0.93045 1.00622 2’ x 2’0.97695 1.01027 1.02304 2’ x 4’0.94147 0.97073 1.03016 G1 04/28/2020 2www.utopialightingus.com UTOPIA LIGHTING reserves the right to change specifications, drawings, dimensions without prior notice. Visit our website for the latest product information. LED EDGE-LIT PANEL MODEL SIZE LED COLOR TEMP.MOUNTING VOLTAGE ULP 14 1’ x 4’40LED 40W LED -30K -35K -40K -50K 3000K 2 3500K 4000K 5000K (Blank) FK SMK AC66 Recessed T-bar Flange Kit for Hard Ceiling 1 Surface Mounting Kit 1 66” Aricraft Cable 4 UNV 120-277V 22 2’ x 2’40LED 40W LED 24 2’ x 4’46LED 46W LED LED DRIVER OPTIONS LIGHTING CONTROL SYSTEM DM DM1 SD40 SDXX TDM TD30/70 TDXX/YY LDE5 LDE1 ELV DIMT 0-10V 5%~100% (Std.) 0-10V 1%~100% 40% / 100% Bi-Level Step dim XX% / 100% Bi-Level Step dim (Specify XX : 10% ~ 70%) Triac Dim. (120V only) 30% / 70% / 100% Tri-Level Step dim XX% / YY% / 100% Tri-Level Step dim (Specify XX, YY : 10% ~ 70%) 5-Series EcoSystem LED driver, 100% ~ 5% dimHi-lume 1% EcoSystem LED driver with Soft-on, Fade-to-Black dimming technology, 100% ~ 1% dim ELV compatible (reverse-phase or trailing-edge)Tri-mode dimming (Triac, ELV, 0-10V) EMI8 EMI16 ELCU-200 GTD GTD10DIM ARRA 8W EM Battery Backup 16W EM Battery Backup Fail-to-on Emergency lighting, UL924 3 Bodine Generator Transfer Device Bodine Generator Transfer Device (0-10VDC Dimmer Override)Assembled in USA for Buy American Act VRF Vive Integral fixture control (RF only), (Must be ordered with EcoSystem drivers or PHSR) ORDERING INFORMATION EXAMPLE: ULP-22-40LED-40K-UNV-DM NOTES: 1. Supplied in separate boxes, field installed. 2. DLC not available with 3000K. 3. Shipped separately. 4. The whole cable length from ceiling to fixture is 66”. * Contact factory for custom wattage or lumen requirement. <Standard><w/ Surface Mounting Kit> All dimensions are in inches (millimeters). Specifications: ULP 2’x2’ Length: 23-3/4 (603) Width: 23-3/4 (603) Depth: 1/2 (12.5) Depth with Junction box: 1-3/4 (44) Specifications: ULP 1’x4’ Length: 47-3/4 (1213) Width: 11-7/8 (301) Depth: 1/2 (12.5) Depth with Junction box: 1-3/4 (44) Specifications: ULP 2’x4’ Length: 47-5/8 (1209) Width: 23-3/4 (603) Depth: 1/2 (12.5) Depth with Junction box: 1-3/4 (44) ULP 2’x2’ (SMK) Length: 23-7/8 (607) Width: 23-7/8 (607) Depth: 2-13/16 (72) ULP 1’x4’ (SMK) Length: 47-15/16 (1217) Width: 11-31/32 (304) Depth: 2-13/16 (72) ULP 2’x4’ (SMK) Length: 47-15/16 (1217) Width: 23-7/8 (607) Depth: 2-13/16 (72) ULP Pendant Mounting 04/28/2020 3 www.utopialightingus.com UTOPIA LIGHTING reserves the right to change specifications, drawings, dimensions without prior notice. Visit our website for the latest product information. LED EDGE-LIT PANEL ULP Model#Brand Manufacturer Manufacturer Part # DM (0-10V 5%~100%)- <Leviton>IllumaTech IP7 series <Lutron>Visit www.lutron.com/advance for a list of dimmers (Mark VII) that will work with this driver <Philips>Sunrise: SR1200ZTUNV <Easeic>EID110U DM1 (0-10V 1%~100%)- <Lutron> Nova: NFTV- dimmer plus PP-DV relay pack(s) Nova T: NTSTV-DV-dimmer Diva: DVTV-dimmer, DVSCTV-dimmer, plus PP-DV relay pack(s), DVSTV-dimmer, DVSCSTV-dimmer GRAFIK Eye QS: QSGRJ-XP, plus GRX-TVI 0-10V interface GRAFIK Eye QS with EcoSystem: QSGRJ-XE, QSGR-XE, plus GRX-TVI 0-10V interface PowPak: RMJ-5T <Leviton>Leviton: IP710-LFZ <Philips>Sunrise: SR1200ZTUNV ELV/TDM ERP <Lutron>S-603PG, DVCL-153P, DV-600P, TGCL-153P, S-600P, DVELV-303P, SELV-300P, TG-600P, LG-600P, CT-103P, MAELV-600, FAELV-500 <Leviton>IPI06-1LZ, 6631-2, VPE06, 6683-IW, 6161, 6633-P, IPE04 <Cooper>DLC03P, SLC03P, DAL06P <Lightolier>ZP260QEW LDE1 Lutron Hi-lume 1% EcoSystem <Lutron> PowPak Dimming Modules: RMJ-ECO32-DV-B, FCJ/FCJS-ECO Energi Savr Node (120V only): QSN-1EC0-S, QSN-2ECO-S GRAFIK Eye QS/Homeworks QS control unit (120V only): QSGRJ-_E(wireless) QSGR-_E Quantum Hub (120V only): QP2-_ _2C/4C/6C/8C Homeworks QS/myRoom Plus power module (120V only): LQSE-2ECO-DLDE5Lutron 5-Series EcoSystem APPROVED DIMMER SWITCH (Table 1) * If you want other specific kind, please contact us. 04/28/2020 6505 Gayhart Street, Commerce, CA 90040Tel 800.686.6672 | www.noralighting.com | e-mail: nora@noralighting.com © 2019 Nora Lighting, Inc. All rights reserved. Specifications subject to change without notice. 100319P1 Type Project Catalog No. Notes PRODUCT IMAGES PRODUCT DESCRIPTION The MAC XL LED Track fixture has an eclectic style to fit any decor. The die-cast aluminum body helps dissipate heat and improve life. Unique design allows the beam spreads to be changed in field; spot included and flood installed. Small track head resembles line voltage fixtures without large driver enclosures. FEATURES ·Over 75% energy savings when compared to incandescent ·Up to 1100lm / 18W ·Field adjustable beam spreads (Flood installed and spot included) ·2700K, 3000K, 3500K or 4000K @ 90 CRI ·Available in black, silver and white finishes ·One or two circuit track capable ·Available in standard H-Style, J-Style or L-Style adapters ·Dimmable CONSTRUCTION Housing: Die-cast aluminum construction dissipates heat for longer life. Adjustability: 350° horizontal and 90° vertical adjustment ELECTRICAL Input Voltage: 120V Lumens / Wattage: 1100lm / 18W Color Temperature: 2700K, 3000K, 3500K, 4000K CRI: 90 Beam Spread: 56º Flood installed and 24º spot included Lifetime: 44,000 hours @ L70 Dimming: ELV Click Here or check complete dimmer list at www.NoraLighting.com in the “Compatibility” page under “Resources” tab Accessories: Luminaire will accommodate a honeycomb louver LABELS AND LISTINGS ·cULus Listed for dry locations ·ENERGY STAR certified ·5-Year Limited Warranty WARRANTY LIMITEDYEAR5 D M CRI90+RoHSCOMPLIANT GREEN COMMITTED TO NTE-875 MAC XL LED Track Head Source: 18W LED 1100lm Example: NTE-875L927X18B = MAC XL LED Track Head, 1100lm / 18W, 2700K, Black Finish, H-Style Adapter Series Color Temp.Finish Adapter Style NTE-875L 927X = 2700K 930X = 3000K 935X = 3500K 940X = 4000K 18B = Black 18S = Silver 18W = White (blank) = H-Style /J = J-Style /L = L-Style MAC XL LED Track Head 6-1/2" 4-1/2"3-1/4" Optional Accessories Description NTE-875HC = Honeycomb Louver, Black T1 04/28/2020 6505 Gayhart Street, Commerce, CA 90040Tel 800.686.6672 | www.noralighting.com | e-mail: nora@noralighting.com © 2019 Nora Lighting, Inc. All rights reserved. Specifications subject to change without notice. 111219P1 Type Project Catalog No. Notes PRODUCT IMAGES AND DIMENSIONS One-Circuit Track System Two-Circuit Track System Track Length / Finish NT-301B = 2' Track, Black (actual length: 24-1/4") NT-301BZ = 2' Track, Bronze (actual length: 24-1/4") NT-301N = 2' Track, Natural Metal (actual length: 24-1/4") NT-301S = 2' Track, Silver (actual length: 24-1/4") NT-301W = 2' Track, White (actual length: 24-1/4") NT-302B = 4' Track, Black (actual length: 48-1/4") NT-302BZ = 4' Track, Bronze (actual length: 48-1/4") NT-302N = 4' Track, Natural Metal (actual length: 48-1/4") NT-302S = 4' Track, Silver (actual length: 48-1/4") NT-302W = 4' Track, White (actual length: 48-1/4") NT-303B = 6' Track, Black (actual length: 72-1/4") NT-303N = 6' Track, Natural Metal (actual length: 72-1/4") NT-303S = 6' Track, Silver (actual length: 72-1/4") NT-303W = 6' Track, White (actual length: 72-1/4") NT-304B = 8' Track, Black (actual length: 96-1/4") NT-304BZ = 8' Track, Bronze (actual length: 96-1/4") NT-304N = 8' Track, Natural Metal (actual length: 96-1/4") NT-304S = 8' Track, Silver (actual length: 96-1/4") NT-304W = 8' Track, White (actual length: 96-1/4") NT-304BA = 8' Track, Black (actual length: 92-3/8") NT-304BZA = 8' Track, Bronze (actual length: 92-3/8") NT-304NA = 8' Track, Natural Metal (actual length: 92-3/8") NT-304SA = 8' Track, Silver finish (actual length: 92-3/8") NT-304WA = 8' Track, White finish (actual length: 92-3/8") NT-331B = 12' Track, Black finish (actual length: 144-1/4") NT-331S = 12' Track, Silver finish (actual length: 144-1/4") NT-331W = 12' Track, White finish (actual length: 144-1/4") Track Length / Finish NT-2301B = 2' Track, Black (actual length: 24-1/4") NT-2301S = 2' Track, Silver (actual length: 24-1/4") NT-2301W = 2' Track, White (actual length: 24-1/4") NT-2302B = 4' Track, Black (actual length: 48-1/4") NT-2302S = 4' Track, Silver (actual length: 48-1/4") NT-2302W = 4' Track, White (actual length: 48-1/4") NT-2303B = 6' Track, Black (actual length: 72-1/4") NT-2303S = 6' Track, Silver (actual length: 72-1/4") NT-2303W = 6' Track, White (actual length: 72-1/4") NT-2304B = 8' Track, Black (actual length: 96-1/4") NT-2304S = 8' Track, Silver (actual length: 96-1/4") NT-2304W = 8' Track, White (actual length: 96-1/4") NT-2304BA = 8' Track, Black (actual length: 92-3/8") NT-2304SA = 8' Track, Silver (actual length: 92-3/8") NT-2304WA = 8' Track, White (actual length: 92-3/8") NT-2331B = 12' Track, Black (actual length: 144-1/4") PRODUCT DESCRIPTION Low profile, extruded aluminum track with 20-Amp rated flat, solid integral conductors. Variety of connectors and accessory parts available. NOTE: Nora Track is not approved for use with remote transformers. Low voltage fixtures require a transformer for each fixture, can be purchased as a separate item or a fixture with transformer included. SPECIFICATION Extrusion: 0.030 die cast aluminum construction with 0.045 PVC insulators holding 12-gauge flat conductor wiring. Polarity groove is located on face of track to indicate location of grounding conductor. Polarity Groove: Each track section includes a groove on the surface of the extrusion. This groove must be continous throughout the track run. Track heads also have a polarity groove, which must coincide with the track’s polarity groove. Mounting: The track may be surface, stem, or cable mounted. All lengths of track can be field cut. Surface mounting hardware included with each track section. Compatibility: Nora track system is compatible with Halo, Catalina, Hampton Bay, Halo-Edison, or any other brand configured to Halo 3-wire track configuration. NOTE: Wands and monopoint canopies are generally not compatible with other manufacturers. ELECTRICAL Input Voltage: 120V Wattage: 2400W each circuit Dimming: Nora track may be dimmed with any approved incandescent, magnetic low voltage, or electronic low voltage controls, depending on the track fixtures being used. If using two dimming switches on NT-2300 two-circuit track, only apply a single phase neutral to the shared common wire on the track rail. Do not attempt to use 3-way or multi-phase neutral if dimming. LISTING cULus Listed for Dry Locations NT-300 and NT-2300 Series One and Two-Circuit Track System Source: 2400W each circuit 120V input Example: NT-302B = 4' One-Circuit Track, Black finish NT-301 / NT-2301: 24-1/4" NT-302 / NT-2302: 48-1/4" NT-303 / NT-2303: 72-1/4" NT-304 / NT-2304: 96-1/4" NT-304A / NT-2304A: 92-3/8" NT-331 / NT-2331: 144-1/4" 1-7/16" 1-7/16" 11/16" 11/16" Neutral Neutral Ground Ground One-Circuit Two-Circuit One-Circuit Polarity Groove Polarity Groove One-Circuit Track Two-Circuit Track 04/28/2020 6505 Gayhart Street, Commerce, CA 90040Tel 800.686.6672 | www.noralighting.com | e-mail: nora@noralighting.com © 2019 Nora Lighting, Inc. All rights reserved. Specifications subject to change without notice. 111219P2 Type Project Catalog No. Notes NT-300 and NT-2300 Series One and Two-Circuit Track System Accessories Live End Feed Circuit Finish NT-316 = One-Circuit NT-2316* = Two-Circuit B = Black S = Silver W = White To start a run. Adds 2-3/4" to length. Left hand polarity available for daisy chain applications (NT-2316L). T-Bar End Feed Circuit Finish NT-348 = One-Circuit NT-2348 = Two-Circuit B = Black S = Silver W = White To start a run. Top three knockouts. Mounting hardware included. Live End Conduit Connector Circuit Finish NT-328 = One-Circuit NT-2328* = Two-Circuit B = Black S = Silver W = White Accepts standard 1/2" conduit fitting. Use the surface conduit feed trade-size conduit fitting. Left hand polarity available for daisy chain applications (NT-328L). L-Connector Circuit Finish NT-313 = One-Circuit NT-2313* = Two-Circuit B = Black S = Silver W = White Connects two track sections at 90º. Field adjustable for right or left hand polarity. Cover included to change to I-Connector. Live End Feed with Cord and Plug Set Circuit Finish NT-321 = One-Circuit B = Black S = Silver W = White Live end 10A 1200W max. with 12' grounded cord and plug. (Not UL Listed) I-Connector Circuit Finish NT-312 = One-Circuit NT-2312 = Two-Circuit B = Black S = Silver W = White Joins two track sections together end to end. Can be used as a power feed. Adds 4" to length. Dead End Cap Circuit Finish NT-318 = One-Circuit NT-2318* = Two-Circuit B = Black S = Silver W = White To end a run. Two are included with each track. Live End Feed with Cover Circuit Finish NT-311 = One-Circuit NT-2311 = Two-Circuit B = Black S = Silver W = White Live end to start a run. Mounting hardware included. Straight Connector Circuit Finish NT-310 = One-Circuit NT-2310 = Two-Circuit B = Black S = Silver W = White Joins two track sections end to end. Cannot be used as a power feed. Adds 1/8" to length. Live End Feed with Canopy Circuit Finish NT-352 = One-Circuit NT-2352 = Two-Circuit B = Black S = Silver W = White Live end to start a run. Mounting hardware included. T-Connector Circuit Finish NT-314 = One-Circuit NT-2314 = Two-Circuit B = Black S = Silver W = White Connects three track sections in a T configuration. Can be used as a powder feed. Floating Canopy Feed Circuit Finish NT-307 = One-Circuit NT-2307 = Two-Circuit B = Black S = Silver W = White Connects track to existing outlet box anywhere along the track. Mounting hardware included Flexible Connector Circuit Finish NT-309 = One-Circuit NT-2309 = Two-Circuit B = Black S = Silver W = White Connecting two tracks at any angle up to 90º. Can be used as a power feed. Adds 7-1/2" to length. Current Limiting Feed with Circuit Breaker Circuit Finish Breaker NT-348 = One-Circuit End Feed NT-358 = One-Circuit In-Line Feed NT-2348 = Two-Circuit End Feed NT-2358 = Two-Circuit In-Line Feed B = Black S = Silver (End Feed only) W = White /0.5A = 0.5A (End Feed only) /1A = 1A /2.5A = 2.5A /5A = 5A /7.5A = 7.5A /10A = 10A /12A = 12A /14A = 14A X-Connector Circuit Finish NT-315 = One-Circuit NT-2315 = Two-Circuit B = Black S = Silver W = White Connects four track sections in a cross configuration. Can be used as a powder feed. Adds 4" to length. 242016 TITLE CAN BE USED TO COMPLY WITH HIGH EFFICACY LED LIGHTSOURCE REQUIREMENTS PART 6 242016 TITLE CAN BE USED TO COMPLY WITH HIGH EFFICACY LED LIGHTSOURCE REQUIREMENTS PART 6 * Note: All two-circuit track connectors are supplied as right polarity, for left polarity add “/L” suffix 04/28/2020 6505 Gayhart Street, Commerce, CA 90040Tel 800.686.6672 | www.noralighting.com | e-mail: nora@noralighting.com © 2019 Nora Lighting, Inc. All rights reserved. Specifications subject to change without notice. 111219P3 Type Project Catalog No. Notes NT-300 and NT-2300 Series One and Two-Circuit Track System Accessories Pendant Assembly Kit Length Finish NT-305 = 18" NT-306 = 24" NT-336 = 36" NT-329 = 48" B = Black S = Silver W = White Suspends track from ceiling. 4' maximum distance between pendant assembly kits. Wire Way Cover Description Finish NT-326 = Wire Way Cover B = Black S = Silver W = White For track to be wired through stem. Use one for each live end used. Outlet Adapter Description Finish NT-327 = Outlet Adapter B = Black S = Silver W = White Allows a power outlet to be placed on the track. (Not UL Listed) Utility Hook Description Finish NT-308 = Utility Hook B = Black S = Silver W = White For chain hung fixtures up to 30 lbs. Can be used as a power feed. Pendant Adapter Description Finish NT-368 = Pendant Adapter B = Black S = Silver W = White Allows a pendant to be powered from track. Adapter extends 2" from the track. Aircraft Cable Suspension Kit Length NT-355/8 = 8' NT-355/20 = 20' Suspends track from high ceiling applications with 1/4" - 20 threaded coupling. Supplied with T-Bar mounting clip, ceiling plate, aircraft cable and couplers. Replacement Stem for Pendant Assmebly Length Finish NRA-132/24 = 24" NRA-132/48 = 48” NRA-132/72 = 72” NRA-132/96 = 96” NRA-82 = Stem Coupler B = Black S = Silver W = White To replace existing or field damaged stem in pendant assembly kit. Use NRA-82 coupler to join two stems together. Outlet Box Cover Description Finish NT-320 = Outlet Box Cover B = Black S = Silver W = White Can be used at any feed connection (live, straight, L, T or X). Screws included. Slope Pendant Adapter Description Finish NT-349 = Slope Pendant B = Black S = Silver W = White Allows pendant assembly kit (NT-305, NT-306, NT-336, NT-329) to hang straight down from ceiling. Can be used to feed power to track. T-Bar Attachment Clip Size NT-332 = 15/16" T-Bar Clip To attach track to T-Bar drop ceiling. 04/28/2020 6505 Gayhart Street, Commerce, CA 90040Tel 800.686.6672 | www.noralighting.com | e-mail: nora@noralighting.com © 2019 Nora Lighting, Inc. All rights reserved. Specifications subject to change without notice. 111219P4 Type Project Catalog No. Notes NT-300 and NT-2300 Series One and Two-Circuit Track System Accessories Versa QuickJack Adapter Description Finish NT-370 = QuickJack Adapter B = Black S = Silver W = White Contains female QuickJack adapter. Accepts all fixtures with male QuickJack adapter. Includes electronic transformer/driver rated for 0-60W. Monopoint for Line Voltage Fixtures Description Finish NT-319 = Square Monopoint NT-366 = Round Monopoint B = Black S = Silver W = White Allows the installation of line voltage track fixture/pendant without a track - not suitable for all products. Mounts permanently to outlet box. Extension Rod Length Finish NT-322/12 = 12" NT-322 = 18" NT-323 = 24" NT-324 = 36" NT-325 = 48” B = Black W = White Extends track fixture from track. Also available by special order, factory installed extension rods to 48". Monopoint for Versa Low Voltage Fixtures Description Finish NT-320 = Square Monopoint B = Black S = Silver W = White Allows the installation of one NTLE-200 Versa series track fixture without a track. Mounts permanently to outlet box. 10 lbs. max weight. Monopoint for Double Locking Fixtures Description Finish NT-380 = Round Monopoint B = Black W = White Allows the installation of double locking track fixture without a track - not suitable for all products. Mounts permanently to outlet box. Compatible fixtures: NTE-854, NTE-855, NTE-880, NTH-910, NTH-920, NTH-930 Monopoint for Aiden Track Head (NTE-850) Description Finish NT-379 = Round Monopoint B = Black S = Silver W = White Allows the installation of Aiden Track Head without a track - not suitable for all products. Mounts permanently to outlet box. Compatible fixture: NTE-850 18" Flexible Extension Rod Length Finish NT-330 = 18" Flexible B = Black W = White For use only with NTH-618. Extends track fixture from track. Cannot be used with NTL-200 series low voltage track fixtures. Slope Adapter Description Finish NT-333 = H Fixture to H Track NT-334 = J Fixture to H Track NT-335* = H Fixture to J Track B = Black S = Silver W = White Used to extend track fixture on a slope ceiling *NT-335 not available in silver finish 04/28/2020 14508 Nelson Ave. City of Industry, CA 91744 • tel: 626.336.4511 • fax: 626.330.4266 • www.csllighting.com ©2018 Creative Systems Lighting, A Division of Troy-CSL Lighting, Inc. All rights reserved. Subject to change without notice. Revised 12/18/18 Notes: Catalog #: Type: Project:Date: Specifications Description Low profile CounterAttack series with integral electronic driver provides even illumination on all surfaces. Available in four lengths and three finishes. LED Light Engine •5W, 10W, 15W or 20W LED •2700K or 3000K at 90 CRI (can be switched in the field with an integral rocker) •50,000 hours at 70% lumen maintenance (L70) Electrical •Integrated 120V driver •Incandescent and ELV dimmable •Linkable up to 600W Mounting Includes mounting hardware (captive screws). Can be hardwired at any point along the run or plugged into receptacle with a cord and plug (ordered separately). Housing •Slim 1-3/8” profile •Formed steel housing •Acrylic lens eliminates LED image Finishes Available in white, bronze or silver metallic Linkable Cables and Connectors CounterAttack can link multiple luminaires up to 600W with male and female connectors on the ends. Linkable with 10” or 18” interlink cables or end-to-end with seamless connectors. On/Off Switch CounterAttack series can be controlled from individual on/off switches or from one master switch. Master switch can be directly connected to the end of a run or moved to a discrete area with interlink cables. (order separately) Listing/Warranty •Five (5) year limited warranty •UL listed to US and Canadian standards for damp locations •Title 24 compliant Order Matrix Electrical Data Part Number Wattage Lumens Efficacy NCA-LED-8 (8”)5W 300lm 60lpw NCA-LED-16 (16”)10W 600lm 60lpw NCA-LED-24 (24”)15W 900lm 60lpw NCA-LED-32 (32”)20W 1200lm 60lpw 1-3/8” CounterAttack Order Matrix (Example: NCA-LED-32-BZ-1) Series Length Finish Rev NCA-LED -8 -16 -24 -32 (8”) (16”) (24”) (32”) -WT -BZ -SM (White) (Bronze (Silver Metallic) -1 Interlink Cables Cable Length Finish Rev NCA-LED-CRD-10 NCA-LED-CRD-18 (10”) (18”) WT BK (White) (Black) -1 CounterAttack LED 120V Switchable Color Temperature Linkable Series Cord and Plug Cable Length Finish Rev NCA-LED-PLG WT BK (White) (Black) -1 Master Switch (3” x 5” x 1-3/8”) Switch Finish Rev NCA-LED-MS WT BZ SM (White) (Bronze) (Silver Metalic) -1 8”, 16”, 24” or 32” 4-3/4” FINAL LENGTH AND FINISH PER MILLWORK. ADDITIONAL ACCESSORIES TO BE DETERMINED. U1 04/28/2020 Z01 04/28/2020 04/28/2020 Z03 04/28/2020 04/28/2020