HomeMy WebLinkAboutFile Documents.950 Cemetery Ln.0072.2018 (42).ARBKResidential Design Standards Administrative Compliance Review Staff Checklist4JOHMF'BNJMZBOE%VQMFYStandard CompliesAlternative ComplianceDoes Not ComplyN/A Sheet #(s)/NotesB.1.Articulation of Building Mass(Non-flexible)B.2.Building Orientation(Flexible)B.3.Build-to Requirement(Flexible)B.4.One Story Element(Flexible)C.1.Garage Access(Non-flexible)C.2.Garage Placement(Non-flexible)C.3.Garage Dimensions(Flexible)Disclaimer: This application is only valid for the attached design. If any element of the design subject to Residential Design Standards changes prior to or during building permit review, the applicant shall be required to apply for a new Administrative Compliance Review.Address: Parcel ID: Zone District/PD: Representative: Email: Phone: Page 1 of 2Approved:(Approved plans/elevations attached)10/19/2018950 Cemetery Lane273512283001R-15Chris BeebeGarrettLarimerDigitally signed by Garrett LarimerDN: cn=Garrett Larimer Date: 2018.10.02 10:53:06 -06'00'bcchris61@gmail.com970-379-4214✔✔✔✔✔✔✔The existing garage meets the requirements for this standard, but is an existingnon-conformity as it does not meet the garage placement standard. This element isnot altered as part of the scope of work and therefore does not apply.Property is located outside the Aspen Infill area. Not in scope.The minimum front yard setback for this property is 25' so this standarddoes not apply.Site does not have access from private street or alley.Location of existing garage does not comply with the requirements of this standardbut no alterations are proposed to this element, this standard does not apply.Existing carport is being converted to a garage but the dimensions arenot being altered so this standard does not apply.
Standard CompliesAlternative ComplianceDoesn’t ComplyN/A Sheet #(s)/NotesC.4.Garage Door Design(Flexible)D.1.Entry Connection(Non-flexible)D.2.Door Height(Flexible)D.3.Entry Porch(Flexible)E.1.Principle Window(Flexible)E.2.Window Placement(Flexible)E.3.Nonorthogonal Window Limit(Flexible)E.4.Lightwell/Stairwell Location(Flexible)E.5.Materials(Flexible)Residential Design Standards Administrative Compliance Review Staff ChecklistDisclaimer: This application is only valid for the attached design. If any element of the design subject to Residential Design Standards changes prior to or during building permit review, the applicant shall be required to apply for a new Administrative Compliance Review.Page 2 of 2Approved: 10/19/2018GarrettLarimerDigitally signed by Garrett Larimer DN: cn=Garrett LarimerDate: 2018.10.02 11:02:50 -06'00'The existing carport contains two separate entrances, the remodel converts thecarport to an encolsed garage and utilizes two separate garage doors that complywith option 1 of this standard, see sheet A3.3.Entry connection will remain street facing, see sheet A3.3 and A1.4.Front door shown at 8', see sheet A3.3.✔✔✔✔✔✔Entry porch measures approximately 9' which is less than one story asdefined by this section, see sheet A3.3.There is a group of windows that comply with the requirements of thissection, see sheet A3.3.No windows span more than one story, see sheet A3.3.✔No non-orthogonal windows are proposed on the street facing facade,see sheet A3.3.✔There are not light wells proposed.✔Materials are used consistently on all sides of the structure and areused true to their characteristics.