HomeMy WebLinkAboutFile Documents.805 Roaring Fork Rd.0019.2018 (58).ARBK95% AFUE
Efficiency
Lochinvar.com
HIGH EFFICIENCY CONDENSING BOILERS
REMOTE CONNECT CAPABLE
OPERATING CONTROL FEATURING
A BUILT-IN CASCADING SEQUENCER
7 MODELS: 55,000 – 399,999 BTU/HR
FIRING RATE MODULATION TO 5:1
LESS THAN 20 ppm NOx
DIRECT VENT FLEXIBILITY TO 100 FEET
01/22/2018
The KNIGHT® Wall Mount, engineered with Lochinvar’s exclusive SMART SYSTEM™ control and an array of other
innovative features is far ahead of any heating boiler in its class. It promises and delivers ultimate ease of installation
and maintenance. With up to 99% efficiency, low-NOx emissions and a fully modulating burner, it is the best ”green choice” for today’s
environmentally focused market.
Seven modulating/condensing stainless steel KNIGHT Wall Mount boilers are available with 55,000–399,999 Btu/hr inputs in a space-
saving wall-mounted design. All are equipped for direct-vent installation with air intake and exhaust runs up to 100 feet using PVC, CPVC,
Polypropylene or AL29-4C vent materials. This range of choices is ideal for residential or light-duty applications such as small hotels,
schools and office buildings. For higher-demand applications, up to eight KNIGHT Wall Mount units can be installed utilizing the built-in
cascading sequencer to deliver up to 3.2 million Btu/hr heating capacity.
The KNIGHT Wall Mount Boiler reflects Lochinvar’s constant commitment to providing all the options you need to serve every application.
Advanced Negative Regulation Technology
KNIGHT safely and reliably operates with supply gas pressure as low as 4 inches water column.
Negative Regulation (Neg/Reg) technology automatically adjusts fan speed to ensure the correct volume
and mix of fuel and air throughout the firing range.
Fire Tube Design
This fully welded ASME Certified stainless steel heat exchanger uses oval shaped tubes to pass heat from the products
of combustion into the water stored in the vessel. To facilitate heat transfer the tubes are manufactured with dimples
to slow the flue products and extract available latent energy. With a fire tube design the flue products are inside
tapered passage ways and the water is passed through the vessel. Since the flue products pass through tubes
and the water is circulated through a larger diameter vessel a fire tube design allows for minimal head pressure
loss through the boiler which allows the boiler to be installed easily into various hydronic applications.
Water-Backed Combustion Chamber
An outstanding feature of the fire tube design is a water backed combustion chamber. By having the combustion
chamber surrounded by water the Knight Wall Mount has more heating surface area. This larger heating surface
area allows for efficiencies up to 99%.
Fully Modulating Burner
The SMART SYSTEM allows fully modulating combustion with 5:1 turndown. The burner can fire as low as 20%
of maximum input and modulates the firing rate up to 100% as demand increases. The burner is a single
stainless steel assembly covered with woven steel mesh and fires in a 360° pattern along the entire length
of the burner. This allows the compact KNIGHT to exceed the modulation capacities of units with larger
multiple burners.
The Smartest Choice for The Smartest Choice for
Condensing Boiler PerformanceCondensing Boiler Performance
KNIGHT offers 5 venting options and tremendous flexibility for placement of units within the building, because it permits direct-vent air
intake and exhaust runs up to 100 equivalent feet using either PVC, CPVC, Polypropylene or AL29-4C stainless steel vent pipe.
Direct Venting up to 100 Feet
Direct Vent Vertical Concentric Direct Vent Vertical*Direct Vent Sidewall Concentric Direct Vent Sidewall*Vertical w/Sidewall Air
*Optional Vent Kit Sold Separately
5 Flexible Venting Options
01/22/2018
• multi-color graphic lcd display
• navigation dial
• usb port
• ability to control up to three different
setpoint temperatures
• compatibility with copper-fin ii non-condensing boiler
to create a front-end loading system
• boilers with different inputs can be cascaded together
to maximize boiler plant turndown
• modbus capability (optional)
• dhw modulation limiting
• dhw night setback*
• 0-10 v boiler rate output
• 0-10 v signal to control variable speed boiler pump*
• 0-10 v system pump signal input*
• heat demand from 0-10v input
• installer can program name and number into the boiler
• installer adjustable freeze protection parameters
• separately adjustable sh/dhw switching times*
• installer access to bms and ramp delay settings
*Exclusive to Lochinvar Smart System
Refined Design Puts More Control
and Information at your Fingertips
Advannced featuurrees iincclude::
Lead-Lag Cascade
The “lead” boiler modulates with demand to capacity.
As demand increases, additional boilers fire and modulate to
capacity. This continues, with additional boilers firing and
modulating to capacity until all units are operating. Every 24
hours, the SMART SYSTEM automatically shifts the lead boiler
role to the next in the sequence, distributing lead-lag runtimes
equally.
Efficiency Optimized Cascade
This feature optimizes the modulation capabilities of the
Boiler Plant while evenly distributing run time across all
cascaded boilers. Every 24 hours the SMART SYSTEM
automatically shifts the 1st boiler on role to the next in
the sequence, distributing run time equally.
SMART SYSTEM Cascade allows 2 - 8 boilers to be sequenced.
New Selectable Cascade Options
When muultiiple KKNIGHT boileers aaree iinstalledd together,r,tthee SSMARTT SSYYSYSSTEM built--inn sseeqquencer can
be setet foor ““Leadad-Lag” cascaade oor ““Efficienccy Optimizzedd”caascadde ooppeeratioon.
At-a-Glance Color Coding
yellow screen
Maintenance due - shows
the installer’s name and
number on the display.
red screen
Lockout mode.
blue screen
Normal system
operation.
The CON·X·US mobile communication platform allows SMART SYSTEM
to go where no other boiler has gone before.†
CON·X·US provides the ability to monitor and manage multiple Knight
heating boilers without ever stepping into the mechanical rooms.
CON·X·US will send alerts via text or e-mail notifying of changes in
system status, and anytime, from anywhere, a user can check system
status and re-program any boiler function. Once downloaded, the free
CON·X·US mobile application allows for remote access to all SMART
SYSTEM functions using an Internet-capable device.
†CON·X·US control board sold separately.
cation allows for remo
sing an Internet-capable dev
old separa
er stepping into
alerts via text or e-mail notify
and anytime, from anywhere, a user c
e-program any boiler function. Once downlo
obile application allows for remote access
mmunication plattion pla
ther boiler has gone before.gone beforeas gone before.††
and manage mulprovides the abi
g boilers without ever stepping into the mechanical roo
X·US will send alerts via text or e-mail notifying of change
status, and anytime, from anywhere, a user can chec
01/22/2018
WHN-04 (Replaces WHN-03 11/14) PDP-7.5M-5/15-Printed in U.S.A.
Smart System™ Features
> SMART SYSTEM Digital Operating Control
Multi-Color Graphic LCD Display
with Navigation Dial and Soft Keys
> Three Boiler Setpoint Temperature Inputs
Plus Domestic Hot Water Prioritization
> Built-in Cascading Sequencer for
up to 8 Boilers
Multiple Size Boiler Cascade
Lead Lag
Efficiency Optimization
Front End Loading Capability with Copper Fin II
> Outdoor Reset Control with Outdoor
Air Sensor
Programmable for Three Reset
Temperature Inputs
> Programmable System Efficiency Optimizers
Night Setback
DHW Night Setback*
Anti-Cycling
Outdoor Air Reset Curve
Ramp Delay
Boost Temperature & Time
> Three Pump Control
System Pump with Parameter for
Continuous Operation
Boiler Pump with Variable Speed
Pump Control*
Domestic Hot Water Pump
> Domestic Hot Water Prioritization
DHW tank piped with priority in
the boiler loop
DHW tank piped as a zone in the
system with the pumps controlled
by the Smart System
DHW Modulation Limiting
Separately Adjustable Space Heat/DHW
Switching Times*
> Building Management System Integration
0-10 VDC Input to Control Modulation
or Set Point
0-10 VDC Modulation Rate Output
0-10 VDC Input to Enable/Disable call for heat
> Access to BMS Settings through Graphic
LCD Display
> High-Voltage Terminal Strip
120 VAC / 60 Hertz / 1 Phase Power Supply
Three Sets of Pump Contacts
> Low Voltage Terminal Strip
24 VAC Device Relay
Proving Switch Contacts
Flow Switch Contacts
Alarm on Any Failure Contacts
Runtime Contacts
DHW Thermostat Contacts
3 Space Heat Thermostat Contacts
System Sensor Contacts
DHW Tank Sensor Contacts
Outdoor Air Sensor Contacts
Cascade Contacts
0-10 VDC BMS External Control Contact
0-10 VDC Boiler Rate Output Contacts
0-10 VDC Variable Speed System Pump Signal
Input*
0-10 VDC Signal to Control Variable
Speed Boiler Pump*
Modbus Contacts
> Time Clock
> Data Logging
Hours Running, Space Heating
Hours Running, Domestic Hot Water
Ignition Attempts
Last 10 Lockouts
> Maintenance Reminder
Custom Maintenance Reminder with Contractor
Contact Information
Installer Ability to De-activate
Service Reminder
> Low-Water Flow Safety Control & Indication
> Password Security
> Customizable Freeze Protection Parameters
Standard Features
> ENERGY STAR Most Efficient Recognition§
> 95% DOE AFUE Efficiency§
> Modulating Burner with 5:1 Turndown
Direct-Spark Ignition
Low-NOx Operation
Field Convertible from Natural to LP Gas
> ASME Stainless Steel Heat Exchanger
30 psi ASME Relief Valve
> Vertical & Horizontal Direct-Vent
PVC, CPVC, Polypropylene or SS Venting up to
100 feet
> Smart System Control
> Condensate Trap
> Other Features
Automatic Reset High Limit
Adjustable High Limit w/Manual Reset
Boiler Circulating Pump
Wall-Mount Bracket
Zero Clearances to Combustible Materials
12-Year Limited Warranty
(See Warranty for Details)
2-Year Parts Warranty
Optional Equipment
CON·X·US Remote Connectivity
Modbus Communication
Flow Switch
Low-Water Cutoff w/Manual Reset & Test
Alarm Bell
Concentric Vent Kit
SMART SYSTEM PC Software
Condensate Neutralization Kit
BMS Gateway to LON or BacNet
Multi-Temperature Loop Control
Sidewall Vent Termination
Floor Stand
Wireless Outdoor Sensor
Firing Codes
> M9 Standard Construction
> M7 California Code
* Exclusive feature, available only from Lochinvar
§ WHN 55-285 only
Input Heating Model Max. Min. *AFUE Capacity NetNumber MBH MBH % MBH MBH
WHN055 55 11 95.0 51 44
WHN085 85 17 95.0 79 69
WHN110 110 22 95.0 102 89
WHN155 155 31 95.0 144 125
WHN199 199.9 40 95.0 185 161
WHN285 285 57 95.0 264 229
WHN399 399 80 94.4 377 328
A B C D E F G H I J K L M N O Gas Water Air Vent Shipping
Conn. Conn. Inlet Size Wt. (lbs.)
33-1/4” 18-1/2” 16” 11-3/4” 10-1/2” 6-1/2” 4” 1-1/2” 3” 14-1/2” 5-3/4” 4” 3” 16-1/4” 5” 1/2” 1” 2” 2” 139
33-1/4” 18-1/2” 16” 11-3/4” 10-1/2” 6-1/2” 4” 1-1/2” 3” 14-1/2” 5-3/4” 4” 3” 16-1/4” 5” 1/2” 1” 2” 2” 142
33-1/4” 18-1/2” 19” 14-1/2” 10-3/4” 7-3/4” 7-3/4” 2-1/4” 10” 15-1/2” 5” 3-1/4” 3” 16-1/2” 2-3/4” 1/2” 1” 3” 3” 159
33-1/4” 18-1/2” 19” 14-1/2” 10-3/4” 7-3/4” 7-3/4” 2-1/4” 10” 15-1/2” 5” 3-1/4” 3” 16-1/2” 2-3/4” 1/2” 1” 3” 3” 166
33-1/4” 18-1/2” 19” 14-1/2” 11-3/4” 8” 8” 1-1/4” 10” 16-3/4” 4-3/4” 3-1/4” 2-3/4” 16-1/2” 3” 1/2” 1-1/4” 3” 3” 175
33-1/4” 18-1/2” 19” 14-1/2” 11-3/4” 8” 8” 1-1/4” 10” 16-3/4” 4-3/4” 3-1/4” 2-3/4” 16-1/2” 3” 1/2” 1-1/4” 3” 3” 184
35-1/2” 25” 21-3/4” 17-1/2” 12-1/2” 9-1/4” 9-1/2” 2-1/4” 13-1/4” 21-1/2” 9” 4-3/4” 4” 22-1/2” 3-3/4” 3/4” 1-1/2” 4” 4” 213
Notes: Indoor installation only. All information subject to change. Change "N" to "L" for LP gas models. *WHN399 value is Thermal Efficiency
Knight Heating Boiler Dimensions and Specifications
Knight®
®
Wall-Mount Boiler Dimensions and Specifications
Patent Pending
Top Right Bottom
Lochinvar, LLC
300 Maddox Simpson Parkway
Lebanon, Tennessee 37090
P: 615.889.8900 / F: 615.547.1000
Lochinvar.com
55, 85: 3" FLUE FOR 100'
285: 3" FLUE FOR 50', 4" FOR 100'
01/22/2018
Product Data
24AHA4Performancet Series Air Conditionerwith Puronr Refrigerant1 --- 1/2 to 5 Nominal Tons
Carrier air conditioners with Puron r refrigerant provide a
collection of features unmatched by any other family of
equipment. The 24AHA4 has been designed utilizing Carrier’s
Puron refrigerant. This environmentally sound refrigerant allows
you to make a responsible decision in the protection of the earth’s
ozone layer.
NOTE:Ratings contained in this document are subject tochange at any time. Always refer to the AHRI directory(www.ahridirectory.org) for the most up--to--date ratingsinformation.
INDUSTRY LEADING
FEATURES / BENEFITS
Energy Efficiency
S 14 SEER/11.7 -- 12.2 EER
(Based on tested combinations)
Sound
S Levels as low as 66 dBA
Design Features
S Small footprint
S WeatherArmort cabinet
All steel cabinet construction
Mesh coil guard
Reliability, Quality and Toughness
S Scroll compressor
S Factory--supplied filter drier
S High pressure switch
S Low pressure switch
S Accumulator
S Line lengths up to 250’ (76.2 m)
S Low ambient operation
(down to --20_F/--28.9_C with low ambient
accessories)
01/22/2018
2
MODEL NUMBER NOMENCLATURE
12 345678
N
91011 12 13
NN A A A/N N N A/N A/N A/N N N
24 AHA418 A00 3 0
Product
Series
Product
Family
Product
Type
Major
Series
SEER Cooling
Capacity
Variations Open Open Voltage Minor
Series
24=AC A = AC H =
Horizontal
Discharge
4=14
SEER
A=Standard 0=Not
Defined
0=Not
Defined
3=208/230---1
5=208/230---3
6=460/3
0, 1, 2...
Use of the AHRI Certified
TM Mark indicates a
manufacturer’s
participation in the
program For verification
of certification for individual
products, go to
www.ahridirectory.org.
PHYSICAL DATA
UNIT SIZE --- SERIES 18---30 24---30 30---30 36---30, 50, 60 48---30, 50, 60 60---30, 50, 60
COMPRESSOR TYPE Scroll
REFRIGERANT Puron(R---410A)
Charge lb (kg)6.40 (2.90)6.50 (2.95)8.60 (3.90)8.90 (4.04)9.00 (4.08)10.60 (4.81)
COND FAN Propeller Type, Direct Drive
Air Discharge Horizontal
Air Qty (CFM)1285 1285 1900 2615 2615 2785
Motor HP 1/12 1/12 1/10 1/4 1/4 1/4
Motor RPM 800 800 800 800 800 800
COND COIL
Face Area (Sq ft)7.3 7.3 12.1 12.1 12.1 14.1
Fins per In.20 20 20 20 20 20
Rows 2 2 2 2 2 2
Circuits 3 3 3 3 3 4
VALVECONNECT.(In.ID)
Vapor 5/8 3/4 3/4 7/8 7/8 7/8
Liquid 3/8
REFRIGERANT TUBES* (In. OD)
Rated Vapor*5/8 3/4 3/4 7/8 7/8 11/8
Max Liquid Line{3/8
* Units are rated with 25 ft (7.6 m) of lineset length. See Vapor Line Sizing and Cooling Capacity Loss table when using other sizes and lengths of lineset.Note: See unit Installation Instruction for proper installation.
{See Liquid Line Sizing For Cooling Only Systems with Puron Refrigerant tables.
01/22/2018
3
REFRIGERANT PIPING LENGTH LIMITATIONS
Liquid Line Sizing and Maximum Total Equivalent Lengths
{for Cooling Only Systems with Puronr Refrigerant:
The maximum allowable length of a residential split system depends on the liquid line diameter and vertical separation between indoor and
outdoor units.
See Table below for liquid line sizing and maximum lengths :
Maximum Total Equivalent Length
Outdoor Unit BELOW Indoor Unit
Size Liquid Line
Connection
Liquid
Line
Diam.
w/ TXV
AC with Puron Refrigerant Maximum Total Equivalent Length{: Outdoor unit BELOW Indoor
Vertical Separation ft (m)
0 --- 5(0---1.5)6 --- 10(1.8---3.0)11---20(3.4---6.1)21---30(6.4---9.1)31---40(9.4---12.2)41---50(12.5---15.2)51---60(15.5---18.3)61---70(18.6---21.3)71---80(21.6---24.4)
018
AC with
Puron 3/8
1/4 150 150 125 100 100 75 --- ------ ------ ---
5/16 250*250*250*250*250*250*250*225*150
3/8 250*250*250*250*250*250*250*250*250*
024
AC with
Puron 3/8
1/4 75 75 75 50 50 --- ------ ------ ------ ---
5/16 250*250*250*250*250*225*175 125 100
3/8 250*250*250*250*250*250*250*250*250*
030
AC with
Puron 3/8
1/4 30 --- ------ ------ ------ ------ ------ ------ ------ ---
5/16 175 225*200 175 125 100 75 --- ------ ---
3/8 250*250*250*250*250*250*250*250*250*
036
AC with
Puron 3/8 5/16 175 150 150 100 100 100 75 --- ------ ---
3//8 250*250*250*250*250*250*250*250*250*
048
AC with
Puron
3/8 3/8 250*250*250*250*250*250*230 160 --- ---
060
AC with
Puron 3/8 3/8 250*250*250*225*190 150 110 --- ------ ---
* Maximum actual length not to exceed 200 ft (61 m)
{Total equivalent length accounts for losses due to elbows or fitting. See the Long Line Guideline for details.
--- --- = o uts id e acce p tab le rang e
Maximum Total Equivalent Length
Outdoor Unit ABOVE Indoor Unit
Size Liquid Line
Connection
Liquid
Line
Diam.
w/ TXV
AC with Puron Refrigerant Maximum Total Equivalent Length{: Outdoor unit ABOVE Indoor
Vertical Separation ft (m)
25
(7.6)
26---50
(7.9---15.2)
51---75
(15.5---22.9)
76---100
(23.2---30.5)
101---125
(30.8---38.1)
126---150
(38.4---45.7)
151---175
(46.0---53.3)
176---200
(53.6---61.0)
018
AC with
Puron 3/8
1/4 175 250*250*250*250*250*250*250*
5/16 250*250*250*250*250*250*250*250*
3/8 250*250*250*250*250*250*250*250*
024
AC with
Puron 3/8
1/4 100 125 175 200 225*250*250*250*
5/16 250*250*250*250*250*250*250*250*
3/8 250*250*250*250*250*250*250*250*
030
AC with
Puron 3/8
1/4 30 --- ------ ------ ------ ------ ------ ------ ---
5/16 250*250*250*250*250*250*250*250*
3/8 250*250*250*250*250*250*250*250*
036
AC with
Puron 3/8 5/16 225*250*250*250*250*250*250*250*
3/8 250*250*250*250*250*250*250*250*
048
AC with
Puron
3/8 3/8 250*250*250*250*250*250*250*250*
060
AC with
Puron
3/8 3/8 250*250*250*250*250*250*250*250*
* Maximum actual length not to exceed 200 ft (61 m)
{Total equivalent length accounts for losses due to elbows or fitting. See the Long Line Guideline for details.
--- --- = o uts id e acce p tab le rang e
01/22/2018
4
REFRIGERANT CHARGE ADJUSTMENTS
Liquid Line Size Puron Charge oz/ft (g/m)
3/8 0.60 (17.74)
(Factory charge for lineset = 9 oz / 266.16 g)
5/16 0.40 (11.83)
1/4 0.27 (7.98)
Units are factory charged for 15 ft (4.6 m) of 3/8” liquid line. The factory charge for 3/8” lineset 9 oz (266.16 g). When using other length
or diameter liquid lines, charge adjustments are required per the chart above.
Charging Formula:
[(Lineset oz/ft x total length) – (factory charge for lineset)] = charge adjustment
Example 1:System has 15 ft of line set using existing 1/4“ liquid line. What charge adjustment is required?
Formula: (.27 oz/ft x 15ft) – (9 oz) = (-4.95) oz.
Net result is to remove 4.95 oz of refrigerant from the system
Example 2:System has 45 ft of existing 5/16” liquid line. What is the charge adjustment?
Formula: (.40 oz/ft. x 45ft) – (9 oz.) = 9 oz.
Net result is to add 9 oz of refrigerant to the system
LONG LINE APPLICATIONS
An application is considered Long Line, when the refrigerant level in the system requires the use of accessories to maintain acceptable
refrigerant management for systems reliability. See Accessory Usage Guideline table for required accessories. Defining a system as long line
depends on the liquid line diameter, actual length of the tubing, and vertical separation between the indoor and outdoor units.
For Air Conditioner systems, the chart below shows when an application is considered Long Line.
AC WITH PURONr REFRIGERANT LONG LINE DESCRIPTION ft (m)
Beyond these lengths, long line accessories are required
Liquid Line Size Units On Same Level Outdoor Below Indoor Outdoor Above Indoor
1/4 No accessories needed within allowed
lengths
No accessories needed within allowed
lengths 175 (53.3)
5/16 120 (36.6)50 (15.2) vertical or 120 (36.6) total 120 (36.6)
3/8 80 (24.4)35 (10.7) vertical or 80 24.4) total 80 (24.4)
Note:SeeLongLineGuidelinefordetails
VAPOR LINE SIZING AND COOLING CAPACITY LOSS
LONG LINE APPLICATION: An application is considered
”Long line” when the total equivalent tubing length exceeds 80
ft. (24.38 m) or when there is more than 20 ft. (6.09 m) vertical
separation between indoor and outdoor units. These applications
require additional accessories and system modifications for
reliable system operation. The maximum allowable total
equivalent length is up to 250 ft. (76.2 m). The maximum
vertical separation is 200 ft. (60.96 m) when outdoor unit is
above indoor unit, and up to 80 ft. (24.38 m) when the outdoor
unit is below the indoor unit. Refer to Accessory Usage Guideline
below for required accessories. See Longline Application
Guideline for required piping and system modifications. Also,
refer to the table below for the vapor tube diameters based on the
total length to minimize the cooling capacity loss.
Vapor Line Sizing and Cooling Capacity Losses — Puronr Refrigerant 1--Stage Air Conditioner Applications
Unit
Nominal
Size (Btuh)
Maximum
Liquid Line
Diameters
(In. OD)
Vapor Line
Diameters
(In. OD)
Cooling Capacity Loss (%)
Total Equivalent Line Length ft. (m)
26---50
(7.9---15.2)
51---80
(15.5---24.4)
81---100
(24.7---30.5)
101---125
(30.8---38.1)
126---150
(38.4---45.7)
151---175
(46.0---53.3)
176---200
(53.6---61.0)
201---225
(61.3---68.6)
226---250
(68.9---76.2)
018
1Stage
AC with
Puron
3/8
1/2 1 2 3 5 6 7 8 9 11
5/8 0 1 1 1 2 2 2 3 3
3/4 0 0 0 0 1 1 1 1 1
024
1Stage
AC with
Puron
3/8
5/8 0 1 2 2 3 3 4 5 5
3/4 0 0 1 1 1 1 1 2 2
7/8 0 0 0 0 0 1 1 1 1
030
1Stage
AC with
Puron
3/8
5/8 1 2 3 3 4 5 6 7 8
3/4 0 0 1 1 1 2 2 2 3
7/8 0 0 0 0 1 1 1 1 1
036
1Stage
AC with
Puron
3/8
5/8 1 2 4 5 6 8 9 10 12
3/4 0 1 1 2 2 3 3 4 4
7/8 0 0 0 1 1 1 1 2 2
048
1Stage
AC with
Puron
3/8
3/4 0 1 2 3 4 5 5 6 7
7/8 0 0 1 1 2 2 2 3 3
11/8 0 0 0 0 0 0 0 1 1
060
1Stage
AC with
Puron
3/8
3/4 1 2 4 5 6 7 9 10 11
7/8 0 1 2 2 3 4 4 5 5
11/8 0 0 0 1 1 1 1 1 1
Applications in this area may be long line and may have height restrictions. See the Residential Piping and Long Line Guideline.
01/22/2018
5
ACCESSORIES
KIT NUMBER KIT NAME
Unit Size (Voltage/Series)
018
(30)
024
(30)
030
(30)
036
(30)
036
(50)
036
(60)
048
(30)
048
(50)
048
(60)
060
(30)
060
(50)
060
(60)
KAACH1401AAA Crankcase Heater X X X X X
KAACH1201AAA Crankcase Heater X X X X
KAACH1501AAA Crankcase Heater X
KAACH1901AAA Crankcase Heater X X
KAAFT0101AAA Evaporator Freeze Stat X X X X X X X X X X X X
KAATD0101TDR Time Delay Relay X X X X X X X X X X X X
KAAWS0101AAA Winter Start Kit X X X X X X X X X X X X
KSALA0801AAA MotorMasterr 230v X X X X X X X X X
KSALA0901AAA MotorMasterr 460v X X X
53DS --- 900 --- --- --- 087 Wind Baffle X X
53DS --- 900 --- --- --- 071 Wind Baffle X X X X X X X
53DS --- 900 --- --- --- 088 Wind Baffle X X X
53DS --- 900 --- --- --- 075 Stacking Kit X X
53DS --- 900 --- --- --- 076 Stacking Kit X X X X X X X X X X
53DS --- 900 --- --- --- 077 Wall Mounting Kit X X
53DS --- 900 --- --- --- 078 Wall Mounting Kit X X X X X X X X X X
KAALP0401PUR Pressure Switch Kit X X X X X X X X X X X X
KSASH2301COP Sound Blanket Kit X X X X X X
KSASH2401COP Sound Blanket Kit X X X X X X
KAALS0201LLS Solenoid Valve Kit X X X X X X X X X X X X
KSAHS1501AAA Capacitor Relay Start
Assist X X X X X X
X = Accessory
ACCESSORY THERMOSTATS
PART NUMBER DESCRIPTION
TP-WEM01 Côr™ Thermostat
TP-PRH01-A edge™ Programmable Relative Humidity Thermostat
TP-PAC01 edge™ Programmable Thermostat
TP-NRH01 edge™ Non-Programmable Relative Humidity Thermostat
TP-NAC01 edge™ Non-Programmable Thermostat
TC-WHS01 Wi-Fi® Thermostat
TC-PAC01 Programmable Thermostat
TC-NAC01 Non-Programmable Thermostat
TCSNAC01 Non-Programmable Standard Screen Thermostat
THERMOSTAT ACCESSORIES
TP-EXP edge™ EXP® Card Programmable edge™ thermostats
TSTATCCSEN01-B Outdoor Air Temperature Sensor TP-Pxx, TP-Nxx
TSTATXXCNV10 Thermostat Conversion Kit (4 to 5 wire) - 10 pack All Carrier® branded thermostats
TX-MBP01 Medium Decorative Backplate TC-Nxx
TX-LBP01 Large Decorative Backplate TP-Pxx, TP-Nxx, TC-Pxx
01/22/2018
6
ACCESSORY USAGE GUIDELINE
Accessory
REQUIRED FOR LOW---AMBIENT
COOLING APPLICATIONS
(Below 55F / 12.8C)
REQUIRED FOR
LONG LINE APPLICATIONS*
(Over 80 ft. / 24.38 m)
REQUIRED FOR
SEA COAST APPLICATIONS
(Within 2 miles / 3.22 km)
Ball Bearing Fan Motor Standard Standard Standard
Compressor Start Assist Capacitor and
Relay Yes Yes No
Crankcase Heater Yes Yes No
Evaporator Freeze Thermostat Yes No No
Liquid Line Solenoid Valve No See Long---Line Application
Guideline No
Low Ambient Pressure Switch or
MotorMasterController Yes No No
* For tubing line sets between 80 and 200 ft. (24.38 and 60.96 m) and/or 20 ft. (6.09 m) vertical differential, refer to Residential Split---System Longline
Application Guideline.
Accessory Description and Usage (Listed Alphabetically)
1. Ball--Bearing Fan Motor
A fan motor with ball bearings which permits speed reduction
while maintaining bearing lubrication.
Usage Guideline:
Required on all units when using MotorMasterr
2. Compressor Start Assist -- Capacitor and Relay
Start capacitor and relay gives a ”hard” boost to compressor
motor at each start up.
Usage Guideline:
Required for reciprocating compressors in the
following applications:
Long line
Low ambient cooling
Hard shut off expansion valve on indoor coil
Liquid line solenoid on indoor coil
Required for single--phase scroll compressors in the
following applications:
Long line
Low ambient cooling
Suggested for all compressors in areas with a history of
low voltage problems.
3. Crankcase Heater
An electric resistance heater which mounts to the base of the
compressor to keep the lubricant warm during off cycles.
Improves compressor lubrication on restart and minimizes the
chance of liquid slugging.
Usage Guideline:
Required in low ambient cooling applications.
Required in long line applications.
Suggested in all commercial applications.
4. Evaporator Freeze Thermostat
An SPST temperature--actuated switch that stops unit operation
when evaporator reaches freeze--up conditions.
Usage Guideline:
Required when low ambient kit has been added.
5. Low--Ambient Pressure Switch Kit
A long life pressure switch which is mounted to outdoor unit
service valve. It is designed to cycle the outdoor fan motor in
order to maintain head pressure within normal operating limits.
The control will maintain working head pressure at low--ambient
temperatures down to 0_F(--18_C) when properly installed.
Usage Guideline:
A Low--Ambient Pressure Switch or MotorMasterr
Low--Ambient Controller must be used when cooling
operation is used at outdoor temperatures below 55_F
(12.8_C).
Suggested for all commercial applications.
6. MotorMaster Low--Ambient Controller
A fan--speed control device activated by a temperature sensor,
designed to control condenser fan motor speed in response to the
saturated condensing temperatures down to --20_F (--28.9_C), it
maintains condensing temperature at 100_F+/--10_F (37.8_C
+/-- 6_C)
Usage Guideline:
A MotorMaster Low--Ambient Controller or
Low--Ambient Pressure Switch must be used when
cooling operation is used at outdoor temperatures
below 55_F (12.8_C).
Suggested for all commercial applications.
01/22/2018
7
ELECTRICAL DATA
U NIT SIZE ---
voltage,series V/PH OPER VOLTS*COMPR FAN MCA MAX FUSE** or
CKT BRK AMPSMAXMINLRARLAFLA
18---30
208/230/1 253 197
56.3 9.0 0.50 11.8 20
24---30 62.9 10.9 0.50 14.1 25
30---30 73.0 14.1 0.70 18.3 30
36---30 77.0 14.1 1.20 18.8 30
48---30 124.0 18.5 1.20 24.3 40
60---30 152.5 23.7 1.45 31.1 50
36---50
208/230/3 253 197
71.0 9.0 1.20 12.5 20
48---50 83.1 13.7 1.20 18.3 30
60---50 110.0 15.9 1.45 21.4 35
36---60
460/3 506 414
38.0 5.6 0.60 7.6 15
48---60 41.0 6.2 0.60 8.4 15
60---60 52.0 7.1 0.80 9.7 15
LEGEND:
FLA --- Full Load Amps
HACR --- Heating, Air Conditioning, Refrigeration
LRA --- Locked Rotor Amps
NEC --- National Electrical Code
RLA ---RatedLoadAmps(compressor)
* Permissible limits of the voltage range at which the unit will operate satisfactorily
** Time --- Delay fuse.
Complies with 2007 requirements of ASHRAE Standards 90.1
A--WEIGHTED SOUND POWER (dBA)
Unit Size
Standard
Rating
(dBA)
Typical Octave Band Spectrum (dBA, without tone adjustment)
125 250 500 1000 2000 4000 8000
18 69 50.5 57.0 59.5 64.5 60.5 53.5 43.0
24 66 50.5 58.5 60.5 59.5 56.5 51.0 41.5
30 68 55.5 59.5 61.5 63.5 60.0 58.0 49.5
36 71 59.5 59.5 62.0 65.5 63.5 62.0 55.0
48 70 57.5 59.5 64.0 66.0 63.0 60.5 54.5
60 73 60.0 61.5 64.5 67.0 66.0 65.5 58.0
NOTE: Tested in accordance with AHRI Standard 270---08 (not listed in AHRI).
A--WEIGHTED SOUND POWER (dBA) WITH ACCESSORY SOUND SHIELD
Unit Size
Standard
Rating
(dBA)
Typical Octave Band Spectrum (dBA, without tone adjustment)
125 250 500 1000 2000 4000 8000
18 68 52.5 58.0 58.5 64.5 59.5 52.5 42.5
24 65 54.5 57.5 59.5 59.0 56.0 50.5 40.5
30 68 55.0 60.0 61.5 62.5 60.0 58.0 49.5
36 71 59.5 59.5 62.5 65.0 63.0 61.5 55.0
48 70 57.5 59.5 63.0 65.0 62.5 60.0 54.0
60 73 61.0 62.0 64.0 67.0 65.5 65.5 57.5
NOTES:
Tested in accordance with AHRI Standard 270---08 (not listed in AHRI).
Accessory sound shield will not accommodate unit sizes 18 and 24.
CHARGING SUBCOOLING (TXV--TYPE EXPANSION DEVICE)
UNIT SIZE---SERIES REQUIRED SUBCOOLING °F (°C)
18 12 (6.7)
24 12 (6.7)
30 12 (6.7)
36 8 (4.4)
48 12 (6.7)
60 10 (5.6)
01/22/2018
8DIMENSIONS -- ENGLISH01/22/2018
9DIMENSIONS -- SI
01/22/2018
10
TESTED AHRI COMBINATION RATINGS*
NOTE: Ratings contained in this document are subject to change at any time.
For AHRI ratings certificates, please refer to the AHRI directory www.ahridirectory.org
Additional ratings and system combinations can be accessed via the Carrier database at:www.MyCarrierRatings.com
For performance data at specific application &/or design conditions with various indoor unit combinations, the equipment
performance calculator can be accessed at :http://rpmob.wrightsoft.com/
Outdoor Model Number Indoor Coil Model Number Furnace Model Number Capacity EER SEER
24AHA418A30 CNPV*3014AL*+TDR 18,000 12.2 14
24AHA424A30 CNPV*3117AL*+TDR 24,000 12.2 14
24AHA430A30 CNPV*3117AL*+TDR 29,600 12.2 14
24AHA436A30 CNPV*3717AL*+TDR 35,400 12.2 14
24AHA436A50 CNPV*3717AL*+TDR 35,400 12.2 14
24AHA436A60 CNPV*3717AL*+TDR 35,400 12.2 14
24AHA448A30 CNPV*6024AL*+TDR 45,000 11.7 14
24AHA448A50 CNPV*6024AL*+TDR 45,000 11.7 14
24AHA448A60 CNPV*6024AL*+TDR 45,000 11.7 14
24AHA460A30 CNPV*6124AL*+TDR 57,000 11.7 14
24AHA460A50 CNPV*6124AL*+TDR 57,000 11.7 14
24AHA460A60 CNPV*6124AL*+TDR 57,000 11.7 14
EER — Energy Efficiency Ratio
SEER — Seasonal Energy Efficiency Ratio
TXV — Thermostatic Expansion Valve
NOTES:
1. Ratings are net values reflecting the effects of circulating fan motor heat. Supplemental electric heat is not included.
2. Tested outdoor/indoor combinations have been tested in accordance with DOE test procedures for central air conditioners. Ratings for other combinations
are determined under DOE computer simulation procedures.
3. Determine actual CFM values obtainable for your system by referring to fan performance data in fan coil or furnace coil literature.
4. Do not apply with capillary tube coils as performance and reliability are significantly affected.
01/22/2018
11DETAILED COOLING CAPACITIESEVAPORATOR AIRCONDENSER ENTERING AIR TEMPERATURES ° F (° C)75 (23.9)85 (29.4)95 (35)105 (40.6)115 (46.1)125 (51.7)CFMEWB°F(°C)Capacity MBtuhTotalSysKW**Capacity MBtuhTotalSysKW**Capacity MBtuhTotalSysKW**Capacity MBtuhTotalSysKW**Capacity MBtuhTotalSysKW**Capacity MBtuhTotalSysKW**TotalSens‡TotalSens‡TotalSens‡TotalSens‡TotalSens‡TotalSens‡24AHA418A30 Outdoor Section With CNPV*3014AL* Indoor Section52572 (22.2)21.4910.921.1820.5510.571.3119.5610.211.4518.509.831.6117.369.431.7916.129.002.0067 (19.4)19.4313.311.1818.5812.961.3117.6712.601.4516.7112.221.6115.6811.821.7914.5711.392.0063 (17.2)17.9612.781.1817.1512.431.3116.3112.061.4515.4311.691.6114.4811.291.7913.4610.862.0062 (16.7)17.6815.681.1816.9115.331.3116.1114.961.4515.2814.561.6114.4814.481.7913.6513.652.0057 (13.9)17.1717.171.1816.5516.551.3115.9115.911.4515.2115.211.6114.4614.461.7913.6313.632.0060072 (22.2)21.9311.501.2120.9411.141.3419.9010.771.4818.7910.381.6417.619.971.8216.329.532.0367 (19.4)19.8414.221.2118.9413.871.3418.0013.501.4817.0013.111.6315.9312.701.8214.7812.262.0363 (17.2)18.3413.631.2117.5113.271.3316.6312.901.4715.7012.511.6314.7212.101.8213.6511.662.0362 (16.7)18.1416.911.2117.3616.531.3316.6116.611.4715.8615.861.6315.0515.051.8214.1514.152.0357 (13.9)17.9517.951.2117.2917.291.3316.5916.591.4715.8415.841.6315.0215.021.8214.1314.132.0367572 (22.2)22.2512.051.2421.2211.691.3620.1511.311.5019.0010.911.6617.7810.501.8516.4610.052.0667 (19.4)20.1515.111.2419.2214.741.3618.2514.371.5017.2213.971.6616.1213.551.8514.9413.092.0663 (17.2)18.6414.451.2417.7714.081.3616.8613.701.5015.9113.301.6614.9012.881.8413.8112.422.0562 (16.7)18.6318.631.2417.9217.921.3617.1817.181.5016.3816.381.6615.5115.511.8414.5614.562.0657 (13.9)18.6018.601.2417.8917.891.3617.1517.151.5016.3616.361.6615.4915.491.8414.5514.552.06EVAPORATOR AIRCONDENSER ENTERING AIR TEMPERATURES ° F (° C)75 (23.9)85 (29.4)95 (35)105 (40.6)115 (46.1)125 (51.7)CFMEWB°F(°C)Capacity MBtuhTotalSysKW**Capacity MBtuhTotalSysKW**Capacity MBtuhTotalSysKW**Capacity MBtuhTotalSysKW**Capacity MBtuhTotalSysKW**Capacity MBtuhTotalSysKW**TotalSens‡TotalSens‡TotalSens‡TotalSens‡TotalSens‡TotalSens‡24AHA424A30 Outdoor Section With CNPV*3117AL* Indoor Section70072 (22.2)28.6214.231.5827.3313.771.7525.9513.301.9424.4812.802.1522.9012.262.4021.2111.702.6767 (19.4)26.0617.531.5724.8817.081.7423.6316.601.9322.3016.092.1420.8715.562.3919.3314.992.6763 (17.2)24.2016.871.5723.1116.411.7421.9615.941.9220.7315.442.1419.4114.912.3817.9914.342.6662 (16.7)23.8020.791.5722.7420.321.7321.6519.831.9220.5820.582.1419.5119.512.3818.3318.332.6657 (13.9)23.2923.291.5722.4422.441.7321.5321.531.9220.5520.552.1419.4819.482.3818.3118.312.6680072 (22.2)29.1114.991.6227.7614.531.7926.3314.041.9824.8013.532.1923.1612.992.4321.4112.422.7167 (19.4)26.5318.751.6125.3018.291.7824.0017.801.9722.6117.282.1821.1316.742.4319.5416.162.7063 (17.2)24.6818.011.6123.5317.541.7722.3317.061.9621.0516.552.1819.6716.002.4218.2115.422.7062 (16.7)24.3922.421.6123.4023.401.7722.4222.421.9621.3621.362.1820.2020.202.4218.9418.942.7057 (13.9)24.2824.281.6123.3623.361.7722.3922.391.9621.3221.322.1820.1720.172.4218.9118.912.7090072 (22.2)29.4615.721.6628.0715.251.8326.5914.762.0125.0114.242.2323.3313.692.4721.5313.112.7567 (19.4)26.8819.931.6525.6119.461.8224.2718.962.0122.8418.432.2221.3217.872.4619.7017.272.7463 (17.2)25.0419.111.6523.8518.631.8122.6018.142.0021.2817.612.2119.8717.052.4618.3816.432.7462 (16.7)25.1525.151.6524.1624.161.8123.1123.112.0021.9821.982.2220.7520.752.4619.4219.422.7457 (13.9)25.1125.111.6524.1324.131.8123.0823.082.0021.9521.952.2220.7320.732.4619.3919.392.74See notes on pg. 13
01/22/2018
12DETAILED COOLING CAPACITIES(CONT.)Evaporator AirCONDENSER ENTERING AIR TEMPERATURES_F(_C)75 (23.9)85 (29.4)95 (35)105 (40.6)115 (46.1)125 (51.7)CFMEWB_F(_C)Capacity MBtuh†TotalSystemKW**Capacity MBtuh†TotalSystemKW**Capacity MBtuh†TotalSystemKW**Capacity MBtuh†TotalSystemKW**Capacity MBtuh†TotalSystemKW**Capacity MBtuh†TotalSystemKW**TotalSens‡TotalSystemKW**TotalSens‡TotalSystemKW**TotalSens‡TotalSystemKW**TotalSens‡TotalSystemKW**TotalSens‡TotalSystemKW**TotalSens‡TotalSystemKW**24AHA430A30 Outdoor Section With CNPV*3117AL* Indoor Section87572 (22.2)35.2016.841.9533.6216.292.1831.9715.732.4330.1815.132.7028.2414.483.0226.1313.793.3867 (19.4)31.9920.621.9230.5620.082.1529.0619.512.4027.4418.912.6825.6718.263.0023.7517.573.3663 (17.2)29.6619.841.9028.3419.302.1326.9518.742.3725.4518.132.6623.8017.482.9822.0216.783.3562 (16.7)29.1824.361.9027.9223.822.1226.5823.242.3725.1824.972.6523.8123.812.9822.3422.343.3557 (13.9)28.3828.381.8927.3727.372.1226.2826.282.3725.0925.092.6523.7723.772.9822.3122.313.35100072 (22.2)35.9017.731.9834.2617.172.2132.5216.592.4630.6615.982.7428.6515.323.0526.4614.623.4167 (19.4)32.6522.031.9531.1721.482.1829.6020.902.4327.9120.282.7126.0819.623.0324.1018.913.3963 (17.2)30.3021.151.9328.9320.602.1627.4820.022.4025.9119.412.6924.2118.743.0122.3618.023.3762 (16.7)29.9426.261.9328.6625.662.1527.4327.432.4126.1526.152.6924.7324.733.0123.1723.173.3857 (13.9)29.6529.651.9328.5628.562.1527.3927.392.4026.1126.112.6924.7024.703.0123.1423.143.38112572 (22.2)36.4418.572.0134.7318.002.2432.9417.412.4931.0216.792.7728.9416.123.0826.7115.413.4367 (19.4)33.1823.381.9831.6422.822.2130.0122.232.4628.2821.602.7426.4020.923.0524.3820.183.4163 (17.2)30.8122.411.9629.3821.852.1927.8921.262.4326.2820.632.7224.5319.943.0422.6519.203.4062 (16.7)30.7630.761.9629.5929.592.1928.3428.342.4426.9926.992.7225.4925.493.0523.8423.843.4157 (13.9)30.7230.721.9629.5529.552.1928.3128.312.4426.9526.952.7225.4525.453.0423.8123.813.41EVAPORATOR AIRCONDENSER ENTERING AIR TEMPERATURES ° F (° C)75 (23.9)85 (29.4)95 (35)105 (40.6)115 (46.1)125 (51.7)CFMEWB°F(°C)Capacity MBtuhTotalSysKW**Capacity MBtuhTotalSysKW**Capacity MBtuhTotalSysKW**Capacity MBtuhTotalSysKW**Capacity MBtuhTotalSysKW**Capacity MBtuhTotalSysKW**TotalSens‡TotalSens‡TotalSens‡TotalSens‡TotalSens‡TotalSens‡24AHA436A30 Outdoor Section With CNPV*3717AL* Indoor Section105072 (22.2)42.5822.262.3640.5121.512.6038.3020.712.8735.9419.873.1633.3718.973.5030.6218.013.8867 (19.4)38.7327.462.3436.8726.712.5834.8825.922.8432.7425.083.1430.4324.183.4827.9723.233.8663 (17.2)35.9626.412.3234.2425.672.5632.4024.882.8230.4324.043.1228.3123.153.4626.0322.203.8562 (16.7)35.3832.602.3233.7331.842.5632.0131.812.8230.3830.383.1228.6328.633.4626.7326.733.8557 (13.9)34.7134.712.3133.3733.372.5531.9231.922.8230.3430.343.1228.5928.593.4626.7026.703.85120072 (22.2)43.2923.462.4241.1322.692.6638.8421.882.9336.3721.023.2233.7120.103.5630.8519.133.9467 (19.4)39.4329.382.4037.4728.612.6435.4027.802.9033.1826.943.2030.7926.023.5328.2625.053.9263 (17.2)36.6428.202.3834.8327.432.6232.9226.622.8830.8725.773.1828.6724.853.5226.3323.883.9162 (16.7)36.2736.052.3834.7734.772.6233.2033.202.8931.5031.503.1929.6129.613.5327.5727.573.9257 (13.9)36.1736.172.3834.7134.712.6233.1533.152.8931.4531.453.1929.5729.573.5327.5427.543.91135072 (22.2)43.8124.602.4841.5823.822.7239.2023.002.9936.6622.133.2833.9221.203.6231.0420.234.0067 (19.4)39.9331.222.4637.9230.442.7035.7829.612.9633.5028.733.2631.0627.783.5928.4926.763.9863 (17.2)37.1429.912.4435.2829.132.6833.3028.302.9431.2027.423.2428.9426.473.5826.5825.433.9762 (16.7)37.4337.432.4435.8735.872.6834.2134.212.9532.3932.393.2530.3930.393.5928.2328.233.9857 (13.9)37.3837.382.4435.8335.832.6834.1634.162.9532.3532.353.2530.3630.363.5928.2028.203.98See notes on pg. 13
01/22/2018
13DETAILED COOLING CAPACITIES(CONT.)EVAPORATOR AIRCONDENSER ENTERING AIR TEMPERATURES ° F (° C)75 (23.9)85 (29.4)95 (35)105 (40.6)115 (46.1)125 (51.7)CFMEWB°F(°C)Capacity MBtuhTotalSysKW**Capacity MBtuhTotalSysKW**Capacity MBtuhTotalSysKW**Capacity MBtuhTotalSysKW**Capacity MBtuhTotalSysKW**Capacity MBtuhTotalSysKW**TotalSens‡TotalSens‡TotalSens‡TotalSens‡TotalSens‡TotalSens‡24AHA448A30 Outdoor Section With CNPV*6024AL* Indoor Section140072 (22.2)54.3228.473.2251.8927.573.5349.2926.623.8846.4325.594.2943.3024.474.7639.8923.275.3067 (19.4)49.5435.143.1947.3534.253.4945.0033.303.8542.4332.284.2539.6031.164.7236.5129.955.2663 (17.2)46.0633.823.1644.0532.943.4741.8932.003.8239.5230.984.2236.9029.874.6934.0428.665.2362 (16.7)45.4441.733.1543.5340.823.4641.4839.823.8139.3739.374.2237.2237.224.7034.8034.805.2457 (13.9)44.5444.543.1542.9742.973.4641.2441.243.8139.3239.324.2237.1737.174.7034.7634.765.24160072 (22.2)55.1729.903.3052.6428.993.6149.9228.013.9646.9626.964.3743.7225.834.8440.1924.615.3867 (19.4)50.3637.463.2748.0936.553.5745.6435.593.9342.9734.534.3440.0533.394.8136.8632.135.3463 (17.2)46.8635.983.2444.7735.093.5542.5134.123.9040.0533.084.3137.3531.934.7734.4030.675.3162 (16.7)46.5144.793.2444.6444.643.5542.7942.793.9040.7340.734.3138.4238.424.7935.8335.835.3357 (13.9)46.3046.303.2444.6044.603.5542.7342.733.9040.6740.674.3138.3738.374.7935.7935.795.33180072 (22.2)55.7931.253.3853.1630.323.6950.3629.344.0447.3128.274.4543.9727.124.9240.3725.895.4667 (19.4)50.9839.683.3548.6238.753.6546.1037.764.0143.3736.694.4240.3735.504.8937.1434.185.4263 (17.2)47.4738.043.3245.3037.123.6342.9836.133.9840.4535.064.3937.6933.874.8634.7032.545.3962 (16.7)47.8047.803.3245.9945.993.6344.0044.003.9941.8141.814.4039.3639.364.8836.6436.645.4257 (13.9)47.7447.743.3245.9345.933.6343.9543.953.9941.7641.764.4039.3239.324.8736.6036.605.41EVAPORATOR AIRCONDENSER ENTERING AIR TEMPERATURES ° F (° C)75 (23.9)85 (29.4)95 (35)105 (40.6)115 (46.1)125 (51.7)CFMEWB°F(°C)Capacity MBtuhTotalSysKW**Capacity MBtuhTotalSysKW**Capacity MBtuhTotalSysKW**Capacity MBtuhTotalSysKW**Capacity MBtuhTotalSysKW**Capacity MBtuhTotalSysKW**TotalSens‡TotalSens‡TotalSens‡TotalSens‡TotalSens‡TotalSens‡24AHA460A30 Outdoor Section With CNPV*6124AL* Indoor Section175072 (22.2)68.8634.684.0965.7333.574.4862.3732.404.9358.6831.125.4554.6529.756.0450.2128.266.7167 (19.4)62.8142.854.0360.0141.764.4257.0040.604.8753.6939.345.3950.0537.965.9846.0336.466.6563 (17.2)58.4141.243.9955.8540.174.3853.1139.034.8250.0637.785.3446.7036.415.9342.9834.906.5962 (16.7)57.6150.933.9855.1749.824.3752.5848.594.8249.9349.935.3447.1547.155.9444.0044.006.6157 (13.9)56.5356.533.9754.5354.534.3752.3252.324.8249.8649.865.3447.0947.095.9443.9443.946.61200072 (22.2)69.9436.444.1966.6635.314.5863.1434.105.0459.3232.815.5655.1431.416.1550.5629.906.8167 (19.4)63.8445.704.1460.9344.594.5357.7843.404.9854.3442.105.4950.5940.696.0846.4539.146.7563 (17.2)59.4343.904.0956.7642.804.4853.8741.624.9350.7240.345.4447.2538.936.0343.4237.376.7062 (16.7)58.9854.674.0956.6656.664.4854.2854.284.9451.6151.615.4648.6348.636.0645.2745.276.7357 (13.9)58.7658.764.0956.5856.584.4854.2054.204.9351.5551.555.4648.5748.576.0545.2245.226.73225072 (22.2)70.7038.104.2967.3036.944.6863.6835.725.1459.7334.415.6655.4432.996.2550.7731.466.9167 (19.4)64.6148.424.2461.5947.284.6358.3546.065.0854.8244.745.5950.9843.276.1846.7941.646.8563 (17.2)60.1846.424.1957.4145.294.5854.4544.095.0351.2142.775.5547.6641.316.1343.7939.656.8062 (16.7)60.6660.664.2058.3458.344.5955.7955.795.0552.9652.965.5749.8149.816.1746.2546.256.8457 (13.9)60.5860.584.2058.2758.274.5955.7255.725.0552.9052.905.5749.7549.756.1746.2046.206.84{Total and sensible capacities are net capacities. Blower motor heat has been subtracted.}Sensible capacities shown are based on 80_F(27_C) entering air at the indoor coil. For sensible capacities at other than 80_F(27_C), deduct 835 Btuh(245 kW) per 1000 CFM (480 L/S) of indoor coil air for each degree below 80_F(27_C), or add 835 Btuh (245 kW) per 1000 CFM (480 L/S) of indoor coil air per degree above 80_F(27_C).** System kw is total of indoor and outdoor unit kilowatts.EWB— Entering Wet BulbNOTES:1. Detailed cooling capacities are based on indoor and outdoor unit at the same elevation per AHRI standard 210/240---2008. If additional tubing length and/or indoor unit is located above outdoor unit, a slight variation incapacity may occur.2. When the required data falls between the published data, interpolation may be performed. Extrapolation is not an acceptable practice.
01/22/2018
14
CONDENSER ONLY RATINGS
SST
°F(°C)
CONDENSER ENTERING AIR TEMPERATURES °F (°C)
55 (12.78)65 (18.33)75 (23.89)85 (29.44)95 (35.0)105 (40.56)115 (46.11)125 (51.67)
24AHA418A30
30
(---1.11)
TCG 16.60 15.60 14.70 13.80 12.90 12.00 11.10 10.10
SDT 68.50 78.00 87.50 97.00 106.50 116.00 125.40 134.70
KW 0.76 0.87 0.99 1.11 1.25 1.40 1.59 1.80
35
(1.67)
TCG 18.30 17.20 16.30 15.30 14.30 13.30 12.30 11.20
SDT 69.70 79.20 88.70 98.20 107.60 117.00 126.30 135.50
KW 0.76 0.87 0.99 1.11 1.25 1.41 1.59 1.80
40
(4.44)
TCG 20.00 19.00 17.90 16.90 15.80 14.70 13.60 12.40
SDT 71.10 80.50 89.90 99.40 108.70 118.00 127.20 136.30
KW 0.77 0.88 0.99 1.11 1.25 1.41 1.59 1.80
45
(7.22)
TCG 22.00 20.80 19.70 18.50 17.40 16.20 14.90 13.60
SDT 72.50 81.90 91.30 100.60 109.80 119.00 128.20 137.20
KW 0.77 0.88 0.99 1.12 1.26 1.41 1.59 1.80
50
(10.0)
TCG 24.00 22.80 21.60 20.40 19.10 17.80 16.40 15.00
SDT 74.00 83.40 92.60 101.90 111.00 120.10 129.20 138.20
KW 0.77 0.88 0.99 1.12 1.26 1.41 1.59 1.80
55
(12.78)
TCG 26.30 25.00 23.60 22.30 20.90 19.50 18.00 16.40
SDT 75.60 84.80 94.10 103.20 112.30 121.30 130.30 139.20
KW 0.78 0.88 1.00 1.12 1.26 1.42 1.60 1.80
24AHA424A30
30
(---1.11)
TCG 21.40 20.20 19.00 17.80 16.60 15.40 14.20 12.90
SDT 71.90 81.30 90.70 100.00 109.30 118.50 127.70 136.80
KW 1.01 1.15 1.30 1.46 1.64 1.85 2.09 2.36
35
(1.67)
TCG 23.50 22.20 20.90 19.60 18.30 17.00 15.60 14.20
SDT 73.50 82.80 92.10 101.30 110.50 119.60 128.70 137.70
KW 1.02 1.16 1.30 1.47 1.65 1.86 2.09 2.37
40
(4.44)
TCG 25.70 24.40 23.00 21.60 20.20 18.70 17.20 15.60
SDT 75.10 84.30 93.50 102.60 111.80 120.80 129.80 138.80
KW 1.02 1.16 1.31 1.47 1.66 1.86 2.10 2.38
45
(7.22)
TCG 28.20 26.70 25.20 23.70 22.10 20.50 18.90 17.10
SDT 76.70 85.90 95.00 104.10 113.10 122.10 131.00 139.80
KW 1.03 1.17 1.32 1.48 1.66 1.87 2.11 2.39
50
(10.0)
TCG 30.80 29.20 27.50 25.90 24.20 22.40 20.60 18.70
SDT 78.50 87.50 96.60 105.60 114.60 123.40 132.20 140.90
KW 1.04 1.18 1.32 1.49 1.67 1.88 2.12 2.39
55
(12.78)
TCG 33.60 31.80 30.10 28.30 26.40 24.50 22.40 20.30
SDT 80.30 89.30 98.30 107.20 116.10 124.90 133.50 142.00
KW 1.05 1.18 1.33 1.50 1.68 1.89 2.13 2.40
24AHA430A30
30
(---1.11)
TCG 27.20 25.80 24.40 22.90 21.40 19.70 17.90 16.00
SDT 69.90 79.20 88.60 98.00 107.30 116.60 125.80 134.80
KW 1.22 1.39 1.57 1.77 2.00 2.27 2.58 2.94
35
(1.67)
TCG 30.10 28.50 27.00 25.40 23.70 21.90 20.00 17.90
SDT 71.20 80.60 89.90 99.20 108.50 117.70 126.80 135.80
KW 1.22 1.40 1.58 1.78 2.01 2.28 2.58 2.94
40
(4.44)
TCG 33.10 31.40 29.70 28.00 26.20 24.30 22.20 20.00
SDT 72.70 82.00 91.20 100.50 109.70 118.90 127.90 136.90
KW 1.23 1.41 1.59 1.80 2.03 2.29 2.59 2.94
45
(7.22)
TCG 36.50 34.50 32.70 30.80 28.80 26.80 24.50 22.10
SDT 74.30 83.50 92.70 101.90 111.00 120.10 129.10 137.90
KW 1.25 1.43 1.61 1.82 2.05 2.31 2.60 2.95
50
(10.0)
TCG 40.00 37.90 35.80 33.80 31.60 29.40 27.00 24.40
SDT 76.00 85.10 94.20 103.40 112.40 121.40 130.30 139.00
KW 1.27 1.45 1.64 1.84 2.07 2.33 2.62 2.95
55
(12.78)
TCG 43.80 41.40 39.20 36.90 34.60 32.10 29.50 26.70
SDT 77.90 86.90 95.90 104.90 113.90 122.80 131.50 140.20
KW 1.29 1.47 1.66 1.87 2.09 2.35 2.64 2.97
See notes on page 15
01/22/2018
15
CONDENSER ONLY RATINGS CONTINUED
SST
°F(°C)
CONDENSER ENTERING AIR TEMPERATURES °F (°C)
55 (12.78)65 (18.33)75 (23.89)85 (29.44)95 (35.0)105 (40.56)115 (46.11)125 (51.67)
24AHA436A30
30
(---1.11)
TCG 31.40 29.80 28.20 26.40 24.60 22.70 20.60 18.50
SDT 68.70 78.10 87.50 96.80 106.20 115.50 124.70 134.00
KW 1.48 1.69 1.91 2.14 2.40 2.69 3.04 3.44
35
(1.67)
TCG 34.70 32.90 31.10 29.20 27.20 25.10 22.80 20.50
SDT 70.00 79.30 88.60 97.90 107.20 116.40 125.60 134.80
KW 1.48 1.70 1.91 2.15 2.41 2.70 3.05 3.45
40
(4.44)
TCG 38.20 36.20 34.20 32.10 29.90 27.60 25.20 22.60
SDT 71.30 80.50 89.80 99.10 108.30 117.40 126.50 135.60
KW 1.49 1.70 1.92 2.16 2.42 2.72 3.06 3.45
45
(7.22)
TCG 42.00 39.80 37.60 35.30 32.90 30.30 27.70 24.80
SDT 72.80 81.90 91.10 100.30 109.40 118.50 127.50 136.40
KW 1.50 1.72 1.94 2.18 2.44 2.73 3.07 3.46
50
(10.0)
TCG 46.00 43.60 41.10 38.60 36.00 33.20 30.20 27.20
SDT 74.40 83.40 92.50 101.60 110.60 119.60 128.50 137.30
KW 1.52 1.74 1.96 2.20 2.46 2.75 3.08 3.47
55
(12.78)
TCG 50.20 47.60 44.90 42.10 39.20 36.20 32.90 29.60
SDT 76.10 85.00 94.00 103.00 111.90 120.80 129.50 138.20
KW 1.54 1.76 1.98 2.22 2.48 2.77 3.10 3.48
24AHA448A30
30
(---1.11)
TCG 41.50 39.50 37.40 35.40 33.20 30.80 28.20 25.40
SDT 73.40 82.60 91.90 101.20 110.40 119.50 128.60 137.50
KW 2.05 2.30 2.57 2.87 3.21 3.60 4.05 4.56
35
(1.67)
TCG 45.70 43.40 41.20 38.90 36.50 33.90 31.10 28.10
SDT 75.10 84.30 93.40 102.60 111.70 120.80 129.70 138.60
KW 2.08 2.33 2.60 2.90 3.24 3.63 4.08 4.60
40
(4.44)
TCG 50.10 47.70 45.20 42.70 40.10 37.20 34.20 30.90
SDT 77.00 86.00 95.10 104.10 113.20 122.10 131.00 139.70
KW 2.12 2.36 2.63 2.93 3.27 3.67 4.12 4.64
45
(7.22)
TCG 54.80 52.20 49.50 46.70 43.80 40.70 37.40 33.80
SDT 78.90 87.80 96.80 105.80 114.70 123.50 132.20 140.80
KW 2.15 2.39 2.66 2.96 3.31 3.71 4.16 4.69
50
(10.0)
TCG 59.90 56.90 54.00 51.00 47.80 44.40 40.70 36.80
SDT 80.90 89.80 98.60 107.50 116.30 125.00 133.60 142.00
KW 2.19 2.43 2.70 3.00 3.34 3.74 4.20 4.72
55
(12.78)
TCG 65.20 62.00 58.80 55.40 51.90 48.20 44.20 39.90
SDT 83.10 91.80 100.50 109.30 117.90 126.50 134.90 143.20
KW 2.24 2.47 2.73 3.03 3.38 3.78 4.24 4.76
24AHA460A30
30
(---1.11)
TCG 53.00 50.30 47.70 45.10 42.40 39.40 36.00 32.40
SDT 76.00 85.10 94.30 103.50 112.70 121.70 130.60 139.40
KW 2.59 2.90 3.23 3.61 4.03 4.52 5.08 5.71
35
(1.67)
TCG 58.30 55.30 52.50 49.70 46.60 43.30 39.70 35.70
SDT 78.00 87.00 96.10 105.20 114.20 123.10 131.90 140.60
KW 2.64 2.94 3.28 3.65 4.08 4.58 5.14 5.78
40
(4.44)
TCG 63.90 60.70 57.60 54.50 51.10 47.50 43.60 39.30
SDT 80.00 88.90 97.90 106.90 115.80 124.70 133.30 141.90
KW 2.69 2.99 3.32 3.70 4.14 4.63 5.20 5.84
45
(7.22)
TCG 70.00 66.50 63.10 59.60 55.90 51.90 47.60 42.90
SDT 82.20 91.00 99.90 108.80 117.60 126.30 134.80 143.20
KW 2.74 3.04 3.38 3.76 4.19 4.69 5.27 5.91
50
(10.0)
TCG 76.40 72.60 68.80 65.00 60.90 56.50 51.80 46.70
SDT 84.60 93.30 102.00 110.70 119.40 127.90 136.30 144.50
KW 2.80 3.10 3.43 3.81 4.25 4.76 5.33 5.97
55
(12.78)
TCG 83.30 79.10 74.90 70.60 66.10 61.30 56.10 50.60
SDT 87.00 95.60 104.20 112.80 121.20 129.60 137.80 145.80
KW 2.86 3.15 3.49 3.87 4.31 4.82 5.39 6.04
* AHRI listing applies only to systems shown in Combination Ratings table.
KW --- Outdoor Unit Kilowatts Only.
SDT --- Saturated Temperature Leaving Compressor (°F)
SST --- Saturated Temperature Entering Compressor (°F/°C)
TCG --- Gross Cooling Capacity (1000 Btuh)
01/22/2018
16
GUIDE SPECIFICATIONS
GENERAL
System Description
Outdoor--mounted, air--cooled, split--system air conditioning unit
suitable for ground or rooftop installation. Unit consists of a
scroll--type hermetic compressor, an air--cooled coil,
propeller--type condenser fan, and a control box. Unit will
discharge supply air horizontally as shown on contract drawings.
Unit will be used in a refrigeration circuit to match up to a
packaged fan coil or furnace.
Quality Assurance
— Unit will be rated in accordance with the latest edition
of AHRI Standard 210.
— Unit will be certified for capacity and efficiency, and
listed in the latest AHRI directory.
— Unit construction will comply with latest edition of
ANSI/ ASHRAE and with NEC.
— Unit will be constructed in accordance with UL
standards and will carry the UL label of approval. Unit
will have c--UL approval.
— Unit cabinet will be capable of withstanding Federal
Test
Method Standard No. 141 (Method 6061) 500--hr salt
spray test.
— Air--cooled condenser coils will be leak tested and
pressure tested
— Unit constructed in ISO9001 approved facility.
Delivery, Storage, and Handling
— Unit will be shipped as single package only and is
stored and handled per unit manufacturer’s
recommendations.
Warranty (for inclusion by specifying engineer)
— U.S. and Canada only.
PRODUCTS
Equipment
— Factory assembled, single piece, air--cooled air
conditioning unit. Contained within the unit enclosure
is all factory wiring, piping, controls, compressor,
refrigerant charge Puronr (R--410A), and special
features required prior to field start--up.
Unit Cabinet
— Unit cabinet will be constructed of galvanized steel and
bonderized.
Fans
— Condenser fan will be direct--drive propeller type,
discharging air horizontally.
AIR--COOLED, SPLIT--SYSTEM AIR CONDITIONER
24AHA4
1--1/2 TO 5 NOMINAL TONS
— Condenser fan motors will be totally enclosed, 1--phase
type with class B insulation and permanently lubricated
bearings. Shafts will be corrosion resistant.
— Fan blades will be statically and dynamically balanced.
— Condenser fan openings will be equipped with coated
steel wire safety guards.
Compressor
— Compressor will be a scroll--type, hermetically sealed.
— Compressor will be mounted on rubber vibration
isolators.
Condenser Coil
— Condenser coil will be air cooled.
— Coil will be constructed of aluminum fins mechanically
bonded to copper tubes which are then cleaned,
dehydrated, and sealed.
Refrigeration Components
— Refrigeration circuit components will include
liquid--line front--seating shutoff valve with sweat
connections, vapor--line front--seating shutoff valve
with sweat connections, system charge of Puronr
(R--410A) refrigerant, and compressor oil.
— Unit will be equipped with high--pressure switch, low
pressure switch and filter drier for Puron refrigerant.
Operating Characteristics
— The capacity of the unit will meet or exceed _____
Btuh at a suction temperature of ______F/_C. The
power consumption at full load will not exceed _____
kW.
— Combination of the unit and the evaporator or fan coil
unit will have a total net cooling capacity of _____
Btuh or greater at conditions of _____ CFM entering
air temperature at the evaporator at ______F/_Cwet
bulb and ______F/_C dry bulb, and air entering the
unit at ______F/_C.
— The system will have a SEER of _____ Btuh/watt or
greater at DOE conditions.
Electrical Requirements
— Nominal unit electrical characteristics will be _____ v,
single phase, 60 hz. The unit will be capable of
satisfactory operation within voltage limits of _____ v
to _____ v.
— Nominal unit electrical characteristics will be _____ v,
three phase, 60 hz. The unit will be capable of
satisfactory operation within voltage limits of _____ v
to _____ v.
— Unit electrical power will be single point connection.
— Control circuit will be 24v.
Special Features
— Refer to section of this literature identifying accessories
and descriptions for specific features and available
enhancements.
Copyright 2015 Carrier Corp.S 7310 W. Morris St.S Indianapolis, IN 46231
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
Catalog No: 24AHA4---02PD
Replaces: 24AHA4---01PD
Edition Date: 03/15
01/22/2018
9FOR THE MOST COMPLETE AND CURRENT INFORMATION VISIT RENEWAIRE.COM EV-SERIES & GRSpecifications may be subject to change without notice.
INDOOR UNIT SPECIFICATIONS
Ventilation Type:
Static plate, heat and humidity transfer
Typical Airflow Range: 50-140 CFM
Standard Features:
Painted cabinet
Line-cord power supply
Low-voltage circuit for controls
Unit may be mounted in any orientation
Controls:
Onboard 24 VAC transformer/relay package
with switched dry contacts
Filters:
Total qty. 2, MERV 8, spun-polyester media:
10 1/2" x 10 1/2" x 1"
Unit Dimensions & Weight:
33 1/2" L x 13 1/4" W x 20" H
48 lbs.
Max. Shipping Dimensions & Weight (in carton):
32" L x 22" W x 18" H
60 lbs.
Motor(s):
Qty. 1, Double-shaft standard motor
Accessories:
Backdraft damper 6"
Wall cap 6" - white, brown
Percentage timer control (PTL)
Push-button point-of-use controls (PBL), PTL req'd.
Percentage timer control with
furnace interlock (FM) 6" Typ. 8 1/8" 5 1/2" Typ. 9" OA EA
RA FA
34" Line Cord
28 3/4" Case
33 1/4" Overall
2 1/4" Typ. 6 3/8" Typ. 13 1/8" Overall(with HangingBracket) 4 1/8" Typ. 18 1/8"Case 2 5/8" 7/8" 8"
NominalTyp.21 3/4" Overall(with HangingBracket)6"
Nominal
Typ. 20" Overall 12 7/8"
Case
11 1/4" MinimumService Area
(Door can beRemoved from
Hinges.)18 1/2"MinimumService Area 17 1/2"
Door
Swing
24V AC
Control
TerminalLEFT VIEW FRONT VIEW RIGHT VIEW
TOP VIEW
Model: EV130Drawing Type: Unit DimensionVersion: MAR16
ABBREVIATIONSEA: Exhaust Air to outsideOA: Outside Air intakeRA: Room Air to be exhaustedFA: Fresh Air to inside
INSTALLATION ORIENTATIONUnit may be installed in any orientation.
NOTE1.UNLESS OTHERWISE SPECIFIED,DIMENSIONS ARE ROUNDED TO THENEAREST EIGHTH OF AN INCH.
2.SPECIFICATIONS MAY BE SUBJECT TO CHANGE WITHOUT NOTICE.
UNIT DIMENSIONS EV-SERIES & GRAIRFLOW CONFIGURATION
Available as shown in dimension drawing.
UNIT MOUNTING & APPLICATION
Can be mounted in any orientation. RA/EA airstream
can be switched with OA/FA airstream.
ELECTRICAL DATA
HP Volts HZ Phase Input Watts FLA
0.1 120 60 Single 102 @ 130 CFM 1.3
UNIT PERFORMANCE CORE PERFORMANCE
Airflow CFM ESP in H20 Temp EFF%Total EFF% Winter/Summer*
79 0.60 78 73/60
104 0.50 75 69/55
126 0.40 72 66/50
137 0.30 71 64/48
153 0.20 68 61/45
165 0.10 67 59/43
* See HVI certification ratings on page 148 of RenewAire’s Full Line Volume XVII Catalog.
Note: Electric Duct Heater and Indirect Gas-Fired Duct Furnace are not available on the EV130.
130EV Energy Recovery Ventilator
Standard
Download specification at:
renewaire.com/specifications
01/22/2018
RENEWAIRE.COM 1.800.627.4499 6
SPECIFICATIONS & DIMENSIONS
Specifications may be subject to change without notice.
INDOOR UNIT SPECIFICATIONS
Ventilation Type:
Static plate, heat and humidity transfer
Typical Airflow Range: 40-110 CFM
Standard Features:
Galvanized cabinet
Terminal strip hard wiring in ebox (no line cord)
Unit may be mounted in any orientation
Control:
Can use any switched line-voltage power supply
(no low-voltage controls)
Filters:
Total qty. 2, MERV 8, spun-polyester media:
9 5/8" x 10 1/2" x 1"
Unit Dimensions: & Weight
22 1/2" L x 11 3/4" W x 23 3/4" H
36 lbs.
Max. Shipping Dimensions & Weight (in carton):
29" L x 22" W x 15" H
40 lbs.
Motor(s):
Qty. 2, Standard motorized impeller blowers
Accessories:
Backdraft damper 6"
Wall cap 6" - white, brown
120V line voltage Honeywell control
5 7/8" Typ. 11 3/4" Overall(with HangingBracket) 18" Case 2 1/4" Typ.
22 1/2"
Overall
Power Wiring
Inlet 7/8"6 1/4"Typ.11 3/4"Typ.5 3/4"Typ.OA
EA
RA
FA
11 5/8"Case
23 3/4"Overall10 1/8" Minimum
Service Area
(Door can beRemoved from
Hinges.)22 1/4" MinimumService Area 21 1/4"
Door
Swing
2 5/8" 7/8" Typ. 21 7/8" Case 6" Nominal
Typ.
8" Nominal
Typ.25 1/2" Overall(with Hanging bracket)Formed
Inlet Ring
LEFT VIEW FRONT VIEW RIGHT VIEW
TOP VIEW
Model: GR90Drawing Type: Unit DimensionVersion: MAR16
ABBREVIATIONSEA: Exhaust Air to outsideOA: Outside Air intakeRA: Room Air to be exhaustedFA: Fresh Air to inside
INSTALLATION ORIENTATIONUnit may be installed in any orientation.
NOTE1.UNLESS OTHERWISE SPECIFIED,DIMENSIONS ARE ROUNDED TO THENEAREST EIGHTH OF AN INCH.
2.SPECIFICATIONS MAY BE SUBJECT TO CHANGE WITHOUT NOTICE.
UNIT DIMENSIONS
AIRFLOW CONFIGURATION
Available as shown in dimension drawing.
UNIT MOUNTING & APPLICATION
Can be mounted in any orientation. RA/EA airstream
can be switched with OA/FA airstream.
ELECTRICAL DATA
HP Volts HZ Phase Input Watts FLA
0.03 120 60 Single 46 @ 90 CFM 0.35
UNIT PERFORMANCE CORE PERFORMANCE
Airflow CFM ESP in H20 Temp EFF%Total EFF% Winter/Summer*
40 0.60 84 74/56
58 0.50 80 69/50
73 0.40 77 65/46
85 0.30 74 62/43
98 0.20 71 59/39
113 0.10 68 56/34
* See HVI certification ratings on page 148 of RenewAire’s Full Line Volume XVII Catalog.
Note: Electric Duct Heater and Indirect Gas-Fired Duct Furnace are not available on the GR90.
90GR Energy Recovery Ventilator
Standard
Download specification at:
renewaire.com/specifications
01/22/2018
01/22/2018
01/22/2018
01/22/2018
01/22/2018
01/22/2018
01/22/2018
01/22/2018
01/22/2018
A United Technologies Company
Carrier 0.
01/22/2018
IInnvviissiiLLiinneeaarr ®®
TTHHEE AAEESSTTHHEETTIICC CCHHOOIICCEE
01/22/2018
01/22/2018
01/22/2018
01/22/2018
01/22/2018
AIR HORIZONS LLC IN NYS: AIR HORIZONS CORPORATION
PO BOX 1369
MEREDITH, NH 03253-1369 USA
PH & FAX: 888-808-2580
InvisiLinear ®
#LBG-724-PSF SERIES
INSTALLATION INSTRUCTION
Installation:
Openings larger than 1 bay should be framed. Raw end or hemmed edge (no flange)
plenum should terminate at the inside of the framing to allow slip-in. Diffuser is fastened
directly to the framing via c/s screws (not shown) through the sub flange. Non standard
wall thicknesses may require adjustments or spacing as required.
Blueboard may be undercut as required to accommodate the sub flange. Blue board should
be scored or beaded all around frame if necessary and plaster feathered in. A fine plaster
line at the grille border is the key to a first class installation.
Standard cores are removable through the face of the diffuser via concealed screws. Both
standard finishes - white and clear anodized - are paintable without further treatment. Black-
out construction, if ordered, should be rollered to avoid paint spray on the blackened
support components.
Opposed blade damper (#OBD) and pattern controller (#SDG-H), if required, duct mount
separately behind the diffuser.
LBG-724-INSTALLATION
01/22/2018
01/22/2018
01/22/2018
01/22/2018
01/22/2018
01/22/2018
Louvered Supply Grilles and Registers • Aero-Blade Series
Steel Border • Aluminum Airfoil Blades
Models: 272RL • Double Deflection • Long Front Blades •
3/4” Blade Spacing
272RS • Double Deflection • Short Front Blades •
3/4” Blade Spacing
D minus 1/2"
D plus 1 3/4"
D minus 3/4"
Nominal Duct Size D "
9/16"
1 1/4"
3/4"
1 13/16"
1/4"
3 9/16"
Optional
Opposed Blade
Damper
TITUS®Submittal ABG-272R 5-1-95
Available Sizes (D” x D”)
Note:Dimensions are in inches. Wall or duct opening should be duct size ±1/8.”
Border Type 1 • Surface Mount
Mounting Frames
1 5/8
5/16
3/8
Duct + 1/16
Duct + 1 13/16
1/4
Duct + 2 7/16
Duct Size
1 1/4
Duct Size - 3/4
Duct
1/4
Available with Border Type 1 only. Single deflection blades shown for clarity.
Type A • External Screw Type C • Concealed Screw PFAP • Aluminum Plaster Frame
Note:Wall opening should be listed duct size + 1/8” to listed duct size + 1/4”.
Model PFAP Plaster Frame can be installed as either surface mount or recessed.
Fastenings
Opposed blade damper
(galvanized steel)
IS • Insect Screen (1/16” square mesh –
galvanized steel)
DS • Debris Screen (1/4” square mesh –
galvanized steel)
Accessories (Optional) Check if provided3
EQT • Earthquake Tabs
Other Finish: ______________________
Standard Finish:#26 White
Other: __________________________
General Description
• Aerodynamically shaped blades are individu-
ally adjustable.
• Optional opposed blade damper has screw-
driver adjustment accessible through face of
register.
• Material is 20 gauge steel for border and
heavy extruded aluminum for blades.
• #8 x 11/4” lg. Phillip’s flat head sheet metal
screws painted white.
• All dimensions are ±1/16”.
TITUS®
990 Security Row • Richardson, Texas 75081 • 972-699-1030 • Fax 972-918-8880
ABG-2.0-S
All rights reserved. No part of this work may be reproduced or transmitted in any form or any means, electronic or mechanical, including photocopying and recording, or by any information storage retrieval system without permission in writing from Tomkins Industries, Inc.
Note: This submittal is meant to demonstrate general dimensions of this product. The drawings on this submittal are not meant to detail every
aspect of the product with exactness. Drawings are not to scale. TITUS reserves the right to make changes without written notice.
Recessed Mounted Example
Border Type 1 is available in sizes 6” x 4” through 48” x 48” in one piece construction. Sizes larger than 48” x 48” are shipped in multiple
sections with joining strips for field assembly. Odd and fractional sizes are available at additional cost.01/22/2018
mr.steam®steambaths Technical Specifications
Model MS Super 3E
Serial Number 9000000 and higher
Mr.Steam Standard Features
•Stainless steel resevoir
•Industrial,large diameter,serviceable heating element
•Modular “snap-in”connections
•Electronic water-level control system
•Full-port drain valve.
•Limited lifetime steam generator parts warranty
Safety Features
•UL recognized electronic controller system
•Built-in,low-voltage 24-volt control
•60-minute electronic countdown with 75-minute limiting
safety back-up
•ASME safety valve
Locating and installing
the Steam Generator Unit
•Select a location as near as practical to the steam room,within 50 feet.
Typical locations include:closet,vanity cabinet,heated attic or basement.
•Do not install steambath generator inside the steam room.
•Do not install steambath generator outdoors or wherever environmental
conditions may affect the safety and/or performance of the generator.
•Do not install steambath generator or plumbing lines in unheated attic
or any locations where water could freeze.
•Do not install steambath generator near flammable or corrosive materials
or chemicals or in areas having a high concentration of chlorine.
•Install steambath generator on a solid and level surface or securely
mounted to a wall using the keyhole slots provided.
•Install steambath generator in an upright position only.
•Provide a minimum of (12)inches at both ends and top of the steam
generator or as required for servicing.
Refer to Mr.Steam Installation,Operation and Maintenance Manual PUR
101289 REV 10.08 or later for complete instructions.
Required Plumbing
Water Supply (3/8"NPT)Steam Outlet (1/2"NPT)
Safety Valve (3/4"NPT)Drain (1/2"NPT)
Steam Head (1/2"NPT)
•Locate steam head 6–12 inches above floor.
•For tub/shower enclosures,install 6 inches above tub top edge.
•Consult with supplier of acrylic,fiberglass and other non-heat resist-
ant enclosures for recommended steamhead location.An acrylic shield
is available for these installations (part number 103938).
Electrical
All electrical wiring to be installed by a qualified licensed electrician in
accordance with National Electrical Code and local electrical code.
Power Wiring
1.Check power voltage.Use 240V rated unit when supply is greater
than 208V.(Most homes have 240V,1PH service).Use 208V rated
unit for 208V power.
2.Use minimum 90˚C/300V rated insulated copper conductors only,
type THHN or equal sized in accordance with National Electrical
Code and local electrical code for the Amps in Ampere Chart.If
allowed by code,NM cable may require a larger wire size than as
listed on the chart.
3.Connect suitably sized equipment grounding wire to ground terminal
provided.
4.Install a separate circuit breaker between supply and unit.Provide a
power supply disconnect within sight of the steam generator or one
that is capable of being locked in the open position.
5.For single phase units,use two-wire supply source and equipment
grounding wire.Neutral (white)wire is not required.
†All specifications shown are for 208V and 240V,single phase.
Consult factory for other voltage specifications.
††See power wiring,note 2 above.
AMPERE CHART
max room volts wire size
model no.vol.cu.ft.kw 1 ph†amps (awg)††
MS Super 3E 675 15.0 208 73 4
240 63 4
01/22/2018
17"
(432)23/8"
(60)
4"
(102)
13/8"
(35)
77/8"
(200)
71/4"
(184)
10"
(254)
121/2"
(310)
183/4"
(466)
13/4"
(45)
6"
(152)
63/8"
(162)
21/2"
(64)
17"
(432)23/8"
(60)
4"
(102)
13/8"
(35)
77/8"
(200)
71/4"
(184)
10"
(254)
121/2"
(310)
183/4"
(466)
13/4"
(45)
6"
(152)
63/8"
(162)
21/2"
(64)
Water Inlet
Control &
Accessory
Connections
Steam Outlet
Safety Valve
Optional AutoFlush
Side View Showing
Element Access Panel
Manual Drain Valve
NOTES:
1.M=Optional AutoFlush
2.All units in inches (MM)
IMPORTANT NOTE:
Provide a minimum of twelve (12)inches
at both ends and top of the steam generator or as
required for servicing.Alternately,provide unions as
required to facilitate installation and disconnection
of the steam generator.
IMPORTANT NOTE:
The minimum clearance from combustible
surfaces is zero all around.
IMPORTANT NOTE:
Do not rough in plumbing and electrical services
based in the dimensional information provided.
Drawings are not to scale.
TO AVOID EQUIPMENT DAMAGE DO NOT CONNECT POWER
SUPPLY DIRECTLY TO HEATING ELEMENTS !!!
NOTE:FOR ILLUSTRATIVE PURPOSES ONLY.
IMPORTANT:See Mr.Steam®Installation,Operation and
Maintenance Manual,PUR 101289,for details.Click here
to download this manual:
http://mrsteam.com/products/technical-downloads.html
mr.steam®steambaths Technical Specifications
Model MS Super 3EGeneratorDiagram
2
01/22/2018
Stainless Steel Indirect Water Heaters
Lochinvar.com
12 Squire Models to Choose From
- 6 Standard Models from 30 to 119 Gallons
- 6 Solar Models from 65 to 119 Gallons
316L Passivated Stainless Steel Tank
316L High Capacity Stainless Steel Coil
Fully Welded Construction
01/22/2018
Laser Cut Precision
A CNC laser uses Programmable Logic Controls to precisely cut the Squire Indirect Water
Heater’s tank shell out of 14 gauge 316L stainless steel to a tolerance of .01 inch.
2
The Squire Stainless Steel Indirect Water Heater -- with 12 models to choose
from in capacities from 30-119 gallons, we are sure to have the right size
indirect water heater to fit your application.
Squire features important enhancements that our customers will recognize and
benefit from such as a welded and passivated stainless steel tank and heat
exchanger, two-inch thick, high-density insulating foam, and best of all an
American made product built in Lebanon, Tennessee.
LASER Cut Precision
Robotic Welder
Passivated for Protection
- a new Class of Water Heater
Tank Cylinder Roller
The computer controlled tank cylinder rolling machine ensures that the 316L stainless
steel is transformed into a geometrically perfect cylinder.
Coil Winder
Straight tubes are rolled by a seven axis coil winder and turned into a precise, round
coil used in the indirect water heater to transfer the BTU’s from the heat source to the
potable water stored in the tank.
Robotic Welder
This state of the art six axis programmable robotic welder uses computer guidance to
accurately weld the stainless steel fittings to the tank.
Hydrostatic Leak Test
After welding, the tank is hydrostatically pressure tested to ensure quality
conformance.
Passivation Process
Each tank is subjected to a soaking spray of
nitric acid. This treatment washes away any
iron that was left behind during the welding
process and re-establishes the oxide level of the
stainless steel to ensure corrosion resistance.
By removing iron from the welded surfaces, the
Squire is less susceptible to corrosion brought
on by aggressive water.
Jacket and Foam
The dent resistant polypropylene jacket and
ABS caps are attached to the tank assembly,
and then high density foam is added using a
high pressure dispensing system to provide
insulation that will keep the heat where it
belongs, in the water. The result is a tank that
is jacketed and evenly foam insulated with
standby losses as low as 0.5°F per hour.Foam Insulation Process
Stainless Steel Tank Manufacturing
01/22/2018
3
316L Passivated Stainless Steel Tank
316L Stainless Steel material is used for the tank interior for
superior durability and long life. The rust prohibitive characteristics
of this material make it the perfect material to resist the corrosive
tendencies of domestic water. The passivation process consists
of a treatment method that enhances and increases the superior
corrosion resistance of stainless steel.
316L High Capacity Stainless Steel Coil
The Squire’s 316L Stainless Steel heating coil efficiently transfers high
volumes of BTU’s from the heat source to the domestic water with high
first hour delivery capability.
Built in the U.S.A. at Lochinvar’s World Headquarters
A 100% stainless steel indirect water heater built in the USA,
the Squire is completely assembled in Lebanon, Tennessee.
Outstanding Features
Inside Look
Stainless Steel SIT Indirect
How it Works
Combine the Knight Heating Boiler with the
Squire Indirect for the perfect combination for
your application.
Dent resistant polypropelene jacket*Temperature
& pressure
relief valve
Sensor
well
316L
Stainless
Steel coil
High density
foam
insulation
Cold water
inlet
Boiler water
outlet
Boiler
water inlet
The Squire uses the power and efficiency of the
building’s heating boiler or solar array to generate
domestic hot water for showers, dishwashing, clothes
washing or any potable hot water demand. The
efficiency of the heating boiler could be as much as 20%
higher than a direct-fired tank-type water heater. So, why
not use that efficiency to “indirectly” provide hot water for
all potable applications?
By using the Squire to indirectly heat the domestic water, you
eliminate the additional gas line, electrical connections and
vent ducts needed with direct-fired tank-type water heaters.
Six Standard Models from 30 to 119 Gallons
The highest quality indirect water heater in the market also has
one of the widest ranges of gallon capacities. With 6 models
covering gallon capacities from 30 to 119 gallons the Squire is
one of the broadest lines available.
Six Solar Models from 65 to 119 Gallons
With three dual coil models for solar heating in conjunction with
a heat source and three models with a solar coil and an electric
element the Squire line of water heaters has a model to fit any
residential or light duty commercial solar application.
100% Stainless Steel Construction
Squire Water Heaters are constructed with Stainless Steel
materials that are highly resistant to corrosion that can result
from poor water quality.
*SET models feature metal jacket
01/22/2018
Fully Welded Construction
Lochinvar utilizes state of the art, highly accurate robotic
welding equipment that results in a fully welded construction
method that requires no gaskets or mechanical sealing
methods. Gaskets and seals are the weak point of any water
storing appliance, therefore Lochinvar’s advanced design
eliminates this potential failure point.
Factory Supplied Tank Sensor (SIT and SDT only)
A tank sensor with built in temperature limit is standard
equipment on all sizes. This sensor accurately monitors the
water temperature and sends a call for heat when the tank
temperature drops below the desired setpoint. This sensor
is 100% compatible and can be directly connected with
Lochinvar’s line of KNIGHT or Cadet Heating Boilers.
T&P Relief Valve
Supplied with the unit in the carton. (shipped loose)
High Density CFC/HCFC Free Polyurethane Foam
Two inches of R-13.4 High Density Polyurethane foam yields
the lowest standby losses in the industry.
Attractive Rust Resistant Jacket
Resistant to scratches and dents, the Squire will maintain its
classic high quality appearance for years.
Limited Lifetime Warranty*
Lochinvar believes that the Squire is the best built Indirect
Water Heater on the market, we have a Limited Lifetime
warranty to prove it.
*SIT models only
Stainless Steel SIT Indirect Solar Indirect with SET Electric Back-upSolar Indirect with SDT Dual Coil
Squire Indirect Water Heaters with a single coil and
an electric element are designed to collect heat from
a solar array and transfer the collected heat into
the stored water by way of the indirect coil which is
located in the lower portion of the tank.
An electric element, which is controlled by a factory
supplied thermostat, is positioned in the top half of
the tank to ensure ample hot water even at times
when the solar array is not capable of collecting the
heat required by the DHW demand.
Squire Indirect Water Heaters with a dual coil design
have a coil in the lower portion of the tank to transfer
heat from a solar array to the water that is stored in
the tank.
An additional coil in the upper portion of the tank
will transfer heat from a back-up boiler into the
water. This will ensure that the tank has ample hot
water even at times when the solar array cannot
generate enough heat to suitably heat the tank.
01/22/2018
Domestic Coil
Model Water Connection Shipping
Number A B D G H I Conn. Size Wt. (lbs.)
SIT030 39-1/2” 20” 32-1/4” 21-3/4” 8-1/4” 3” 1” 1” 79
SIT040 55-3/4” 20” 48-1/2” 25-1/4” 8-1/4” 3” 1” 1” 105
SIT050 48” 24” 39-3/4” 24-1/2” 9-1/4” 3-3/4” 1” 1” 131
SIT065 60” 24” 52-1/4” 28” 9-1/4” 3-1/4” 1-1/2” 1” 147
SIT080 69-1/2” 24” 61-3/4” 28” 9-1/4” 3-1/4” 1-1/2” 1” 177
SIT119 69” 28” 60-1/4” 31-3/4” 9-1/4” 3-1/4” 1-1/2” 1” 213
Heat Source Standby First Continuous 1st Hour Min. Flow Friction
Model Capacity Water Volume Loss Draw Delivery Delivery Coil Load Rate Loss
Number (Gallons) (Gallons) (°F/Hr) Gals. (GPH) (Gallons) (Btu/Hr) (GPM) (Ft. Hd.)
SIT030 27 1.1 1.5 24 160 183 99,000 14.0 3.9
SIT040 40 1.6 0.9 27 181 208 115,000 14.0 4.5
SIT050 52 1.7 0.9 47 209 255 133,000 14.0 5.3
SIT065 67 1.9 0.7 65 263 327 154,000 14.0 5.7
SIT080 82 2.1 0.6 74 266 347 160,000 14.0 5.7
SIT119 114 3.2 0.5 109 349 459 200,000 14.0 6.5
Performance data is based on I=B=R test results. All ratings are based on 180°F boiler water temperature with incoming cold water at 50°F and a Delta T of 77°F.
Includes tank sensor for use with KNIGHT or Cadet Heating Boiler.
Optional thermostat available for use with other boiler models.
SIT MODELS
All models standard with a Lifetime
Limited Warranty Against Tank Failure.
All parts are warranted for one year.
Five year limited tank warranty on all
models when installed in a commercial
application.
Stainless Steel Indirect SIT Models Dimensions and Specifications
TRIM AREAThe “Hot Water Outlet” connection is Female NPT.
All other connections are Male NPT.
01/22/2018
Solar Stainless Steel Indirect Dimensions and Specifications
PDP-7.5M-3/15–Printed in U.S.A.SIT-02 (Reprint SIT-02 4/14)
Stainless Steel Indirect Water Heaters
A
D
G
H
I
FROMPANEL
TOPANEL
COLD WATERINLET
SOLARSENSORWELL
Domestic Coil
Model Water Connection Shipping
Number A B D E F G H I Conn. Size Wt. (lbs.)
SDT065 60” 24” 52-1/4” 47-1/4” 33-3/4” 28” 9-1/4” 3-1/4” 1-1/2” 1” 158
SDT080 69-1/4” 24” 61-3/4” 53-3/4” 40-1/4” 28” 9-1/4” 3-1/4” 1-1/2” 1” 188
SDT119 68” 28” 60-1/4” 54-1/2” 37-1/2” 31-3/4” 9-1/4” 3-1/4” 1-1/2” 1” 224
Heat Boiler Heat Standby Continuous 1st Hour Min. Flow Friction
Model Capacity Source Water Source Water Loss Delivery Delivery Coil Load Rate Loss
Number (Gallons) (Gallons) (Gallons) (°F/Hr) (GPH) (Gallons) (Btu/Hr) (GPM) (Ft. Hd.)
SDT065 66 2.1 1.7 0.7 175 205 128,000 14.0 3.4
SDT080 79 2.1 1.7 0.6 175 208 128,000 14.0 3.4
SDT119 110 3.2 2.6 0.5 251 301 181,000 14.0 4.9
Performance data based on incoming cold water at 50°F and a Delta T of 77°F. Delivery ratings for boiler coil only. Includes tank sensor for use w/ KNIGHT Heating Boiler.
Domestic CoilModel Water Connection ShippingNumber A B D G H I Conn. Size Wt. (lbs.)
SET065 60” 24” 52-1/4” 28” 9-1/4” 3-1/4” 1-1/2” 1” 149
SET080 69-1/2” 24” 61-3/4” 28” 9-1/4” 3-1/4” 1-1/2” 1” 179
SET119 68-1/4” 28” 60-1/4” 31-3/4” 9-1/4” 3-1/4” 1-1/2” 1” 215
Electric Electric Heat Source Standby Continuous 1st HourModel Capacity Water Loss Delivery DeliveryNumber (Gallons) (Gallons) (°F/Hr) (GPH) (Gallons)
SET065 67 1.9 0.7 24 54
SET080 81 2.1 0.6 24 57
SET119 113 3.2 0.5 24 75
All SET models: 4500w 240v 1 phase.
SDT Models Dimensions and Specifications
SET Models Dimensions and Specifications
A
D
G
H
I
FROMPANEL
TOPANEL
COLD WATERINLET
SOLARSENSORWELL
SDT Models SET Models
SET & SDT MODELS
All models standard with a 5 year
Limited Warranty Against Tank Failure.
All parts are warranted for one year.
*SET models only
The “Hot Water Outlet” connection is Female NPT.
All other connections are Male NPT.
Lochinvar, LLC
300 Maddox Simpson Parkway
Lebanon, Tennessee 37090
P: 615.889.8900 / F: 615.547.1000
Lochinvar.com
01/22/2018