HomeMy WebLinkAboutFile Documents.210 S 1st St.0281.2017 (34).ARBK Halo LED H4 Collection
Trims
44
4" LED Square Downlight Baffle Trims s '
• Compatible with EL4 series(round)downlight light engines
_ • Consistent O.D.with Halo 4"family
• Square step baffle for controlled aperture brightness
• Regressed Solite®flat glass lens
• Wet Location, shower rated
TLS408WHWB-Square baffle trim TLS408WHBB-Square baffle trim • Precision-formed aluminum baffles and die-cast trim rings offer
with Solite®regressed lens,white with Solite®regressed lens,black high-quality fit and finish
baffle,and white trim ring baffle,and white trim ring • Trim gasket provides AIR-TITETA4 seal, and compliance where local
,...ii .L.,.... .A
codes require a gasket on wet location, shower-rated trims
Li_iii,
rr rvt]
C
L_3-3/8"
TLS408SNBB-Square baffle trim with TLS408TBZBB-Square baffle trim [86 mm]
5-1/64"
Solite®regressed lens,black baffle, with Solite®regressed lens,black [129 mm]
and satin nickel trim ring baffle,and tuscan bronze trim ring
4" LED Wall Wash Downlight Trims
_ • Wall wash optics with downlight performance
• Two downlight reflector cone finish options: semi-specular clear
and white
• Precision-formed aluminum reflectors and die-cast trim rings_41 -_- high-quality fit and finish
TL409WW-Semi-specular reflector TL409WHWW-White reflector with • High-reflectance vaccum-metalized specular wall wash kick
with wall wash optic,diffusing lens, wall wash optic,diffusing lens,and reflector for high-angle vertical illumination
and white trim ring white trim ring • Polymer diffusing dome lens for smooth distribution
• Compatible with EL4 Series downlight light engines
27I14
[57mm] / \ • Wet location, shower rated
L`
1 4-7/8" I
[125 mm]
7-1/4"
[184 mm]
14
4" LED Polymer "Dead Front" Shower Trim s
• White polymer baffle and ring
,11� / \ • Prismatic,clear flat polymer lens
143°r11 • Non-electrically conductive"dead front"
I [6-3/8" I • Non-corrosive front
6 5-1/64" • Wet Location, shower rated
TL422PS-White polymer baffle and [129 mm]
ring with prismatic clear polymer lens
4" LED Designer Trim Rings
• For use with TL4x round downlight trims only
• Optional accessory
• Die-cast trim ring
• Thin profile provides subtle ceiling appearance(0.120"at OD and 0.180"at ID)
TRM400PC Polished chrome RECEIVED
TRM400BK Black
TRM400WH White
TRM400SN Satin nickel 11/0 2/2 017
TRM400TBZ Tuscan bronze
6 ASPEN
BUILDING DEPARTMENT
Halo LED H4 Collection
Housings
• Available for insulated ceilings`(ICAT)and non-insulated ceilings(TAT,TCP)
• ICAT and TAT designated housings are AIR-TITETM in compliance with restricted airflow requirements per ASTM-E283 standard
• Include standard Halo features:
-Got Nail!TM Bar hangers with pre-installed nail and integral T-grid clip
-Slide-N-SideTM wire traps and quick-connects for tool-less wiring outside the junction box
-Pass-N-ThruTM bar hanger feature for tool-less shortening of bars without removal from frame
• LED driver integral in the housing for optimized lumen delivery and superior thermal management
• LED driver designed for high efficiency and long life-operating the LED package for over 50,000 hours
• Dimmable
-ICAT housings are dimmable to 10%in normal operation with most 120V leading edge(LE)and trailing edge(TE)phase control dimmers.May also
dim to 5%using dimmers with low-end trim adjustment.(Consult dimmer manufacturer.)
-Non-IC housings have two dimming options:phase control and 0-10V control.Phase control is dimmable to 10%in normal operation with most
120V leading edge(LE)and trailing edge(TE)phase control dimmers.0-10V is dimmable to 10%in typical operation with compatible 0-10V DC low
voltage dimmers with two low voltage dimming wires.(Consult dimmer manufacturer.)
• Can be operated from a standard wall switch if dimming is not required
• Labels
-cULus 1598 Listed Luminaire
-cULus Listed for Damp Location,and wet location with designated trims
• ENERGY STAR®Qualified with designated Halo H4 LED light engines and H4 LED trims`*
• May be used to meet State of California Title 24 and International Energy Conservation Code—IECC High Efficacy requirements with designated
Halo H4 LED light engines and H4 LED trims**
Energy Data / ICAT Housings
• Minimum operating temperature: • Input frequency:50/60Hz
-30°C/-22°F • THD:<20%
• EMI/RFI Emissions FCC 47CFR Part 18,Consumer Limits • Input power: 13.0 W
• Sound rating:Class A standards • Input current: 121 mA(120mA Remodel)
• Input voltage: 120V • Dimmable:Leading edge(LE)and trailing edge(TE)phase control dimmers
• Power factor:>0.90
H457ICAT1 E
ICAT Rated/New Construction
di . • For direct contact with insulation in insulated ceilings.`
• (May also be used in non-insulated ceilings.)
• AIR-TITETM meets restricted airflow requirements per ASTM E-283
• Driver: 13W, 120V,50/60Hz
• EMI/RFI: Rated for FCC Consumer Limits,suitable for residential and commercial
applications
• Dimmable with most leading edge(LE)and trailing edge(TE)phase control
dimmers to 10%(5%on select dimmers with low-end trim adjustment)
• Dimensions:6"L x 8-1/2"W x 5-3/8"H(with 1/2"plaster lip)Ceiling cutout:4-1/2"
H457RICAT1 E
ICAT Rated/Remodel
• Designed for installation from below the finished ceiling
• For direct contact with insulation in insulated ceilings.
(May also be used in non-insulated ceilings.)
4-.e ms
• AIR-TITETM meets restricted airflow requirements per ASTM E-283
• Driver: 13W, 120V,50/60Hz
• EMI/RFI: Rated for FCC Consumer Limits,suitable for residential and commercial
applications
• Dimmable with most leading edge(LE)and trailing edge(TE)phase control
dimmers to 10%(5%on select dimmers with low-end trim adjustment)
• Dimensions: 14-3/4"L x 5"W x 5-1/2"H-Ceiling cutout:4-1/4"
RECEIVED
*ICAT housings are not for direct contact with spray foam insulation.Refer to NEMA LSD 57-2013. 11/0 2/2 017
**Refer to ENERGY STAR®Qualified Products List and CEC(T24)Appliance Database for listings.
10 ASPEN
BUILDING DEPARTMENT
BRINK - model:WS-776 WAC LIGHTING
dweILEDTMLED Bath Responsible Lighting'
Fixture Type:
18"
*I 3„
WS-77618 Catalog Number:
Project:
24"
olP 13"
Location:
WS-77624
36"
4013"
WS-77636
PRODUCT DESCRIPTION SPECIFICATIONS
Sleek style and bountiful light are what define the contemporary Brink Construction:Aluminum and White Acrylic
LED bath vanity light from WAC Lighting.The thin bezel backplate Light Source:High output LED.
contributes to the low-profile design of the Brink.Die cast metal
endcaps and hardware house a co-extruded clear and white acrylic Finish:Brushed Aluminum(AL)
shade which illuminates a superb amount of ambient light.
FEATURES Standards:ETL&cETL damp location listed.ADA Compliant
•Modern,sleek,clean
•Ultra low profile design
•Co-extruded clear and white acrylic provides substance,luminosity
and optical efficacy
•Mount vertically or horizontally
•Driver located in standard 2"x 4"junction box
•Conversion plate for 4"junction box included
•Adjustable backplate
•Universal driver(120V-220V-277V)
•Color Temp:2700K,3000K,3500K
•CRI:90
•Dimming:100%-5%ELV
•Rated Life:85,000 hours
•Input:120-277V
ORDER NUMBER
Color Temp Watt LED Lumens Delivered Lumens Finish
WS-77618-27 2700K 15.5W 1155 910
18" WS-77618-30 3000K 15.5W 1225 1015
WS-77618-35 3500K 15.5W 1330 1115
WS-77624-27 2700K 20.5W 1595 1330
z, WS-77624-30 3000K 20.5W 1720 1440 AL BrushedAlumimum
WS-77624-35 3500K 20.5W 1785 1510
WS-77636-27 2700K 30W 2365 1985
WS-77636-30 3000K 30W 2445 2095
WS-77636-35 3500K 30W 2561 2180
Example:WS-77618-30-AL
RECEIVED
waclighting.com Headquarters/Eastern Distribution Center Central Distribution Center Western Distribution Center
Phone(800)526.2588 44 Harbor Park Drive 1600 Distribution Ct 1750 Archibald Avinle/0 2/2 017
Fax (800)526.2585 Port Washington,NY 11050 Lithia Springs,GA 30122 Ontario,CA 91760
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. ASPEN
BUILDING DEPARTMENT
TYPE C
GMLighting Project:
12V DC LEDTASKTM Type:
HIGH OUTPUT FLEXIBLE LED Location:
LINEAR RIBBON
Contact Phone:
PRODUCT DESCRIPTION 5r„/16.4' .
6mm
A high lumen output flexible LED linear ribbon that conforms to 1.54 65 +
straight,curved and irregular architectural coves, indoor steps o ® ® = ® S ® ® o ® o $31m
and bannisters, interior recesses, undercabinet and task areas 24 1
and other constructs where even, energy saving high lumen j 9m — — ,
output LED illumination is specified. Available in a 5 meter
Radius:
(16.4') reel. Ribbon can be cut in field to achieve desired length. 180mm
7.08'
PRODUCT SPECIFICATIONS
Construction: LEDTask High Output Flexible LED Ribbon
incorporates 300.16W LED diodes per reel and are mounted to
a flexible copper buss.The ribbon is conveniently wound on a 011(&
5 meter(16.4 ft) reel. Each reel is shipped in a moisture proof l
package and is also supplied with appropriate connectors.
Connectors: C US
Five meter reel includes 3-LTW-24 ribbon to power supply
connectors,with 1 LTW-24 affixed to start of reel. ELECTRONIC POWER SUPPLIES
Electrical: 19 LED's per foot. Each LED is.16W. 3.04W per DIMMABLE MAGNETIC POWER SUPPLIES
foot. 5 meter reel is 4.0 amps. 50,000 hour LED life.
Color Temperature: 3500K or 2700K warm white(WW). Cat. No. Description
Kelvin temperature(color) 200K. LTP-2 2 Amp-Switchable- 120V Cord and Plug.
Power Supplies: See chart at right for complete descriptions 12VDC @ 2 amps. Electronic.
and catalog numbers. LTP-6 6 Amp-Switchable- 120V Cord and Plug.
Dimming: Yes with dimmable power supplies(see at right) 12VDC @ 6 amps. Electronic.
utilizing low voltage magnetic on/off wall dimmer(by others). LTH-2 2.1 Amp- 12V DC-25W Metal Chassis Hardwire
Cutting and Mounting: Linear ribbon can be cut every Screw terminals
three LEDs. Ribbon utilizes 3M double stick tape. LTH-4 4.2 Amp- 12V DC-50W Metal Chassis Hardwire
Label: UL listed. Screw terminals
LTH-8 8.5 Amp- 100W Metal Chassis Hardwire
FLEXIBLE LED RIBBON CONNECTORS Screw terminals and mounting feet. Electronic.
Cat. No. Description LTH-16 16.7 Amp-200W Metal Chassis Hardwire
LTC-1 Ribbon to Ribbon Connector Screw terminals and mounting feet. Electronic.
LTC-3 3" Flexible Ribbon to Ribbon Connector LTH-25 25 Amp-320W Metal Chassis Hardwire
LTC-12 12" Flexible Ribbon to Ribbon Connector Screw terminals and mounting feet. Electronic.
LTC-24 24" Flexible Ribbon to Ribbon Connector LTH-50-DIM Dimmable-Primary: 120VAC,60Hz, 0.33A
LTC-36 36" Flexible Ribbon to Ribbon Connector Secondary: 12VAC, 12VDC,4A Max.50W
LTC-60 60" Flexible Ribbon to Ribbon Connector LTH-60-DIM Dimmable-Primary: 120VAC,60Hz, 0.33A
LTW-6 6" Flexible Ribbon to Power Supply Connector Secondary: 12V AC/DC, 12VDC,4A Max.60W
LTW-24 24" Flexible Ribbon to Power Supply Connector
LTW-48 48" Flexible Ribbon to Power Supply Connector LTHM-100-DIM Dimmable-Input: 120VAC, 60Hz,
LTW-60 60" Flexible Ribbon to Power Supply Connector Output: 12VDC 8A Max. 100W, Nema 3R Enclosure
For power supply dimensions,please see www.gmlighting.net
Catalog No. Color Total LEDs LED Watts Amps per Reel Lumens per Ft.* Ribbon Length LED Life
LTR300-27 2700K 300 0.16W 4 143 5 meters 50,000 hrs.
Warm White 19 per ft. 3.04W per ft. 16.4 ft.
LTR300-WW 3500K 300 0.16W 4 174 5'beim 50,000 Ins.
Warm White 19 per ft. 3.04W per ft. 16.4 ft.
*Kelvin temperature(color)±200. F ,
vEr
E! tI..ighIing GM Lighting, LLC • 9830 W. 190th St. • Unit F • Mokena, IL 60448
Toll Free: (866)671 0811 FAX: (708)478 2640 • www.gmlightinirky O2/2 017
e-mail: gmlightingllc@sbcglobal.net• Specifications subject to change without notice.
020111_IedtaJ1-'i_iPut
N L
BUILDING DEPARTMENT
TYPE C CHANNEL
GMLighting Project:
ALUMINUM CHANNEL FOR Type:
FLEXIBLE LED LINEAR RIBBON Location:
Contact Phone:
PRODUCT DESCRIPTION
Extruded aluminum channel with snap-on frosted lens that provides a
rigid,linear mounting platform for the following GM Lighting LEDTask /
Flexible LED Linear Ribbons:
i�
• LTR60
V
• LTR300
• LTR300-SO
• LTR300-WP
• SLR
• LTR150-RGB .
Note: Aluminum channel will not accept LTRWP-RGB
Wet Location Ribbon.
,••MOUNTING
Channel screws directly into surface. Flexible LED linear ribbon uses
attached 3M mounting tape.
PLEASE ALLOW THE FOLLOWING CLEARANCE
TO ALLOW FOR FLEXIBLE RIBBON TO RIBBON CONNECTORS
O O O O
O O O O
LTR300-SO SERIES
LTR300 SERIES: O
LTC CONNECTOR
(1 3';12':241; LTR60/300WP SLR SERIES: LTR150-RGB SERIES
36"or 60") SERIES: SLC RTR
LTCWP CONNECTOR CONNECTOR
CONNECTOR (12;24; (12.;24;
O (12;24", 36"or60") 36"or 60")
36"or 60")
O
O O O O
O O V
48" •
1 r.
3/81 I
1 MOUNTING HOLES
6 H— I
I O.C. I
I I I
END VIEW
I•--5/8
Cat. Number Length Width Height Finish
LED-CHL 48" 5/8" 3/8" Aluminum
r I
G ghting GM Lighting,LLC6 • 811 W 1 0th 70 )St.4 • Unit F • Mokena, h 60448
Toll-Free:ng,(866)671-0811 FAX: (708) • Unit
• Mokenli,IL 6 .net 11 02 2 017
Specifications subject to change without notice. LED-CHL_072012
ASPEN
BUILDING DEPARTMENT
TYPE C P.S.
] foster
transformer
company The Standard of Quality Since 1937
http://www.foster-transformer.corn
3820 colerain avenue• cincinnati,oh 45223-2586 • phone:(513)681-2420• fax:(513)681-2424• toll free:(800)963-9799
DIMMABLE LED POWER SUPPLY:
� i I'�ilk
40)us
tltERfgA'
r
M.rrcas•"1"-
RoRS COMAE /3TE0
7 ETL Certified for North America' and CE marked for Europe.
7 Tested to ANSI/UL 60950-1, CAN/CSA C22.2 No. 60950-1-03' and EN 60950-1 .
`7 Breakthrough Short Circuit & Overload Protection. Patented.
7 Limited Power Source Output allows for Class 2 wiring.
7 Multiple Input Voltages 120 V, 240 V, and 277 V, 50/60 Hz.
`7 Output Configurable for 12 VDC or 24 VDC up to 60 W.
7 Can be dimmed with standard household dimmer.
7 No External Fusing Required. — 3 3/4 -
`7 Can Withstand a Direct Short Circuit in Excess of 15 Days! 1
7 Transformer fully encapsulated for protection against the elements. r J
— 1I
Enclosure and Mounting Bracket 304 Stainless Steel _
I co
9/32
li) O]
• I F
Epoxy Encapsulated for long life.
and protection from moisture.
�� = Nam;-__M_________________1
1
---------------------------
Ili CO 1
i
I1 rr
-0 rol i
, o
, —o
Integral Wiring Compartment.
with standard 1/2"conduit knockouts RECEIVED
— #8-32 Ground Screw Provided
'Power supply is not registered with Electrical Safety Authority(ESA)for use in the province of Ontario, 11/0 2/2 017
Canada at this time. If ESA registration is required for your applicaiton, please contact the factory.
ASPEN
BUILDING DEPARTMENT
STEP LIGHTS
Model: WL-LED100 WAC LIGHTING
LEDme® Step Light Responsible Lighting®
Fixture Type:
Catalog Number:
5" r1Y2"i
Y2'"NPTthreaded hole Project:
Location:
} t7
} 0 03" _8 2" o 0 178"
1Y8"
1
23/8'"-1 �— 21/2"
3/6"
front side back
PRODUCT DESCRIPTION
Horizontal rectangle LEDme®Step Light.Designed for safety and style on stairways,patios,decks,balcony areas,walkways and building perimeters.
Features an architectural design.Energy efficient for long-lasting indoor and outdoor lighting solutions.Creates an attractive,romantic impression at night.
FEATURES SPECIFICATIONS
• 316 marine grade cast stainless steel(SS)available Construction:Die-cast aluminum or 316 marine grade cast stainless steel
• Direct wiring,no driver needed
• Low profile,flush to wall aesthetics with no visible hardware Power:Direct wiring,no remote driver needed.Input voltage:120V or 277V
AC 50/60Hz
• Turtle friendly(AM,RD colors)
• 40,000 hour rated life Light Source:3000K CCT Samsung HV-AC High Power LED,CRI:85
• Balanced lighting,free of shadows with minimum glare Optional color lenses.Total power consumption of 3.9W
• Up to 200 fixtures can be connected in parallel Mounting: Fits into 2"x 4"J-Box with minimum inside dimensions of 3"L x 2"W x 2"H
• Replaceable LED module
• 5 year WAC Lighting product warranty Includes bracket for J-Box mount.See next page for spacing recommendations
Dimming:Dim to 10%with electronic low voltage(ELV)dimmer
Approved dimmers:Lutron Skylark SELV-300P-WH and Leviton Vizia VPEO4
FIXTURE PERFORMANCE Standards:IP66,UL&cUL Listed for wet locations
Model# Lm Model# Lm Model# Lm Model# Lm Model# Lm
WL-LED100-C-SS 45 WL-LED100-C-BK 31 WL-LED100-C-WT 68 WL-LED100-C-BN 31 WL-LED100-C-BZ 32
WL-LED100-AM-SS 28 WL-LED100-AM-BK 19 WL-LED100-AM-WT 38 WL-LED100-AM-BN 19 WL-LED100-AM-BZ 21
WL-LED100-RD-SS 3 WL-LED100-RD-BK 2 WL-LED100-RD-WT 4 WL-LED100-RD-BN 2 WL-LED100-RD-BZ 2
WL-LED100-BL-SS 5 WL-LED100-BL-BK 3 WL-LED100-BL-WT 8 WL-LED100-BL-BN 3 WL-LED100-BL-BZ 4
WL-LED100E-C-SS 37 WL-LED100E-C-BK 25 WL-LED100E-C-WT 58 WL-LED100E-C-BN 25 WL-LED100E-C-BZ 27
WL-LED100E-AM-SS 20 WL-LED100E-AM-BK 14 WL-LED100E-AM-WT 29 WL-LED100E-AM-BN 14 WL-LED100E-AM-BZ 15
WL-LED100E-RD-SS 2 WL-LED100E-RD-BK 1.5 WL-LED100E-RD-WT 3 WL-LED100E-RD-BN 1.5 WL-LED100E-RD-BZ 2
WL-LED100E-BL-SS 4 WL-LED100E-BL-BK 3 WL-LED100E-BL-WT 6 WL-LED100E-BL-BN 3 WL-LED100E-BL-BZ 3
ORDER NUMBER FINISHES
Model# Color Finish 55 BK WT BN BZ
C White 3000K SS Stainless Steel
Mir
BK Black
WL-LED100 120V AM Amber 67onm WT White
WL-LED1 OOF 277V RD Red 640nm BN Brushed Nickel
BL Blue 450nm 15Z Bronze
Example: WL-LED100E-BL-SS RF^�� D
WAC Lighting Headquarters/Eastern Distribution Center Western Distribution Center 7�
www.waclighting.com 44 Harbor Park Drive•Port Washington,NY 11050 1750 Archibald Avenue•Irrjp J/7 17
Phone(800)526.2588•Fax(800)526.2585 Phone(516)515.5000•Fax(516)515.5050 Phone(800)526.2588•Fax ) 2 5
WAC Lighting retains the right to modify the design of our products at anytime as part of the company's continuous improvement program. NO V2Gq'PE N
BUILDING DEPARTMENT
Click here to print this page
CLIGHTING Heracleum II Pendant Light
Item Code: MOI-HERACLEUM
Description: Material(s): Nickel, Metal, Copper,
1 Polycarbonate
1 Dimensions:
• 38.6"D X 25.6"H; 157.5"max overall
' height
\ l • Canopy:5.12"W X 4.3"H
\\\tx)\( a Lamp Type: LED
-
Bulbs: 63 LEDs,14W total; 5V DC;2700K
(warm white); CRI 85;459 lumens(included)
Listing:CUL, UL
Price: Price: $3,901.00
+Free Shipping
Options: Model:
Nickel
Copper
Design by Bertjan Pot Powered Through Electrosandwich®by Marcel Wanders,2010.
By M000i.
Decorative LED lamp inspired by the Heracleum Plant.The white leaves/lenses ramify from one branch creating a very technical,
natural structure. By using the technique of coating conductive layers(Electrosandwich®),the lamp is very thin and delicate.A design
not possible with normal wires.The Heracleum leaves are not frozen in one position.They can be freely re-positioned by rotating them
around their stem.
Heracleum II provides decorative ambient light. Metal wire frame, polycarbonate lenses and ultra-thin suspension wire.Offered in
nickel or copper. Dimmable with a low voltage R, L type dimmer(incandescent/halogen). Driver located in the canopy.
UL Listed.
If you have questions,call(866)428 9289
RECEIVED
11/02/2017
ASPEN
BUILDING DEPARTMENT
Click here to print this page
CSuspenders® 36 Inch 4 Tier Tri Bar 15 Light LED Suspension
LIGHTING System
Item Code: SON-SUSPEND-36-IN-4-TIER-TRI-15-LT-
LED-S
Description: Material(s): Metal, Glass
AIM!
— Dimensions:
a • Clear Cylinder-Overall Dimensions:
49"L X 49"W X 39"H;60"max overall
height
• Crystal Double Rod-Overall
I I Dimensions:49"L X 49"W X 31"H;50"
max overall height
• Etched Double Rod-Overall
#* Dimensions:49"L X 49"W X 31"H;50"
■ •/ max overall height
■ • Half-Etched Cylinder-Overall
Dimensions:49"L X 49"W X 39"H;60"
1 max overall height
I` ■ • Half-Etched Sphere-Overall
Dimensions:49"L X 49"W X 39"H;60"
max overall height
• Crystal Chiclet-Overall Dimensions:
49"L X 49"W X 33"H; 52"max overall
height
_ • Etched Chiclet-Overall Dimensions:
49"L X 49"W X 33"H; 52"max overall
height
• Wings-Overall Dimensions:49"L X
49"W X 35"H;54"max overall height
• Crystal Ladder Light-Overall
Dimensions:49"L X 49"W X 36"H;55"
max overall height
• Ball-Overall Dimensions:49"L X 49"W
X 33"H;52"max overall height
• Crystal Oval-Overall Dimensions:
49"L X 49"W X 33"H; 52"max overall
height
• Drum-Overall Dimensions:49"L X
49"W X 34"H;53"max overall height
• Crystal Teardrop-Overall Dimensions:
49"L X 49"W X 36"H; 55"max overall
height
• Reflector-Overall Dimensions:49"L X
49"W X 33"H;52"max overall height
• Crystal Rod-Overall Dimensions:49"L
X 49"W X 37"H;56"max overall height
• Etched Rod-Overall Dimensions:49"L
X 49"W X 37"H; 56"max overall height
• White Tapered Bell-Overall
Dimensions:49"L X 49"W X 30"H;49"
max overall height
• Gray Tapered Bell-Overall
Dimensions:49"L X 49"W X 30"H;49"
max overall height
• Amber Tapered Bell-Overall
Dimensions:49"L X 49"W X 30"H;49"
max overall height
• Power Feed(Canopy):6.5"Dia X
0.63"H
Lamp Type: LED Bulbs: RECEIVED
11/02/2017
ASPEN
BUILDING DEPARTMENT
Click here to print this page
SLIGHTING Tolomeo Mega wall
Item Code: ART-TOLMEG-W
Description: Notes: In order to be eligible for a 5 year
warranty,this product must be registered within
2 months of purchase.
-0
Material(s):Aluminum, Paper, Polycarbonate,
Steel
Dimensions:
• 12 Inch:38.8"W X 43.3"H;Shade:
12.6"DX8.7H
• 14 Inch:39.4W X 43.3H;Shade: 14"D
X 9.8H
- • 17 Inch:40.1W X 43.3H;Shade:
16.5"D X 11.4"H
k
Lamp Type: INCANDESCENT
Bulbs: 1 X 100W max 120V E26(medium
base)A19 compatible incandescent, compact
fluorescent or LED lamp(not included)
Listing:CUL, UL
Manufacturer Information:Click to download
specifications.
Price: Price: $610.00
+Free Shipping
Options: Model:
12 in. D/Aluminum/Parchment Shade
12 in. D/Aluminum/Fiber Shade
12 in. D/Aluminum/Black Shade
12 in. D/Black/Black Shade
14 in. D/Aluminum/Parchment Shade(Quickship)
14 in. D/Aluminum/Fiber Shade
14 in. D/Aluminum/Black Shade
14 in. D/Black/Black Shade
17 in. D/Aluminum/Parchment Shade(Quickship)
17 in. D/Aluminum/Fiber Shade(Quickship)
17 in. D/Aluminum/Black Shade
17 in. D/Black/Black Shade
The Tolomeo Mega Wall Light is adjustable for direct and diffused task lighting. Features a fully adjustable,articulated arm and body in
anodized aluminum with polished aluminum joints and tension control knobs.Composed of a an aluminum framed diffuser with
parchment paper or pale satin/polycarbonate fiber blend shade. Ships with a 4.5"diameter polished,die-cast aluminum wall bracket
and 10 feet of field-adjustable cord.The Tolomeo Mega Wall Light is suitable for a cord and plug connection to wall outlet or may be
mounted directly to an electrical junction box. Dimmer on cord.Available with 12, 14 or 17"shade options.
UL Listed.
If you have questions,call(866)428 9289
RECEIVED
11/02/2017
ASPEN
BUILDING DEPARTMENT