HomeMy WebLinkAboutFile Documents.311 Park Ave.0319.2017 (19).ARBK METAL ROOFING _
_.... _ .
__, _
,. , , 7..„,,,,,_ . _
. .
. . ,
STANDING SEAM
. _ ,
. . .... ,
.___ .
.... _
_____ ._,,,__ . _
..skk' I - --., . alar ,• . •
Ma
--"Vir•-
LOKSEAM® "
LokSeam® is a snap-together standing seam roof system with a 1 3/4" tall vertical rib, for use on roofs with a minimum slope
of 3:12. LokSeam® panels are available in 12-inch, 16-inch and 18-inch widths. LokSeam® panels can be installed over open
framing or a solid substructure and are capable of transitioning from roof to fascia with the use of a rib cover. LokSeam®does
not require a solid substructure for support.
Features and Benefits:
• Narrower widths, heavier gauges,striations and embossing minimize oil canning.
41.0
• Panels can be installed on roofs with a transition by using MBCI's die-formed rib covers.
• Numerous UL 580 Construction rating are available, as well as UL 790, Class A for
external fire,numerous roof assemblies for UL 263 for internal fire and the UL 2218
Class 4 impact rating.
• LokSeam®carries Florida approval rating.
Product Specifications
I-1a • Applications:Roof • Gauges:24(standard);22(12",16",18"),26
• Coverage Widths:12",16",18" (12")(optional)
1 • Minimum Slope:3:12 • Finishes:Striated(standard);Embossed
�` Striated(optional)
• Panel Attachment:Concealed Fastening
System,Standard and UL90 Clips • Coatings:Galvalume Plus®,Signature®200,
Signature®300,Signature®300 Metallic
2113ele,
www.mbci.com I shop.mbci.com
HOUSTON 1281.407.6915 ENNIS,TX 1469.256.8255 MEMPHIS,TN 1662.298.2337 ROME,NY 1315.371.4330
ADEL,GA 1888.514.6062 INDIANAPOLIS 1317.364.4329 OKLAHOMA CITY 1405.492.6968 SALT LAKE CITY 1385.715.2952
ATLANTA 1678.337.1619 LUBBOCK,TX 1806.224.2724 PHOENIX 1480.630.3022 SAN ANTONIO 1210.888.9768
ATWATER,CA 1209.445.3891
05-17
STANDING SEAM METAL ROOFING
LO KS EAM®
CATEGORY CHARACTERISTIC TEST METHOD PURPOSE RESULT
ENVIRONMENTAL Impact Resistance UL 2218 Determines Impact Resistance of Class 4 Rating
prepared Roof Covering Materials
Room Fire Performance UL 790 Standard for Standard Test Methods for See Class A Fire Rating Data Sheet
Fire Tests of Roof Coverings
FIRE RESISTANCE For use in Design Nos.P225,P227,P230,
Room Fire Performance UL 263 Standard for Fire Tests of Building P237,P265,P268,P508,P510,P512,
Construction and Materials P701,P711,P720,P722,P726,P731,
P734,P801,P815,P819.
Provides a standard procedure to evaluate
Uplift Resistance ASTM E 1592 or confirm structural performance under See Load Chart Section
STRUCTURAL uniform static air pressure difference
North American Specification for the See Section Properties and Allowable
Gravity Loads AISI S100 Design of Cold-Formed Steel Structural Load Table Section
Members
Roof Performance Determines the uplift resistance of roof Class 90 Rating Construction Number
Underwriters UL 580 assemblies consisting of the roof and roof 254,255,261,303,342,343,414,436,
Laboratories coverings materials 445,446,447,448,486,508A,543 and
544.
Florida product approval is the approval
Roof Performance ASTM E 1592 of products and systems,which comprise
Florida Approval UL 790 the building envelope and structural See FL#11819.3
frame,for compliance with the structural
ROOF LISTINGS requirements of the Florida Building Code.
TWIA provides windstorm and hail
insurance in areas exposed to hurricanes
Roof Performance and currently provides windstorm and
Texas Department UL 580 hail coverage in the following 14"first tier" See RC 61
of Insurance Texas coastal counties: Aransas,Brazoria,
Calhoun,Cameron,Chambers,Galveston,
Jefferson,Kenedy,Kleberg,Matagorda,
Nueces,Refugio,San Patricio and Willacy.
Descriptions and specifications contained herein were in effect at the time this publication was approved for printing.In a continuing effort to refine and improve products,MBCI reserves the
right to discontinue products at any time or change specifications and/or designs without incurring obligation.To ensure you have the latest information available,please inquire or visit our
website at www.mbci.com.Application details are for illustration purposes only and may not be appropriate for all environmental conditions,building designs or panel profiles.Projects should
be designed to conform to applicable building codes,regulations and accepted industry practices.If there is a conflict between this manual and project erection drawings,the erection drawings
will take precedence.MBCI's insulated metal panel product line is manufactured by Metl-Span®. 05-17