HomeMy WebLinkAboutFile Documents.608 W Hopkins Ave.0109.2018 (4).ARBK NIIT
INVINSA® ROOF BOARD
Johns Manville High-Density Polyiso Advantage
Meets the requirements of ASTM C 1289,Type II,Class 4,Grades 1,2 and 3
Component
Features and Componentstio-
ii
6
High-Density Polyisocyanurate Foam Core:Closed cellCover Board
polyisocyanurate foam technology provides additional insulationMum-P value,with lightweight and low water absorption characteristics. single Ply
Mineral Coated Fiber Glass-Reinforced Facers:Bonded in-line toType
the polyisocyanurate foam care to provide a smooth,strong surfacePF
for better membrane adhesion without the need for rimin ,with High Density
priming, '` Polyisocyanurate Poly Foam
enhanced water resistance that will not support mold growth. Foam
Lightweight:Offers labor and installation efficiencies and allows more - Fiber Glass-Reinforced
LT
Fiber Glass-Reinforced Low Thermal
options for situations where the overall weight is a concern.This also Facers
means easy hoisting,staging and maneuvering around the roof. HD
Flexibility:Means less breakage during handling,and in re-cover High Density
applications it allows Invinsa to accommodate minor irregularities in
existing roofs.
User Friendly:Invinsa allows easy&efficient scoring,cutting and
snapping which permits fast,tight fabrication and all in a low dust
environment.
Resistance To Damage:High impact,flexural and compressive
strength provides a protective layer for insulation while working with
the membrane above to ensure maximum performance and longevity.
System Compatibility This product may be used as a component in the following systems.Please reference product application for specific installation methods and information.
> BUR APP SBS a TPO PVC EPDM
cir ws CA CA "" CA SA MF FA MF FA MF FA BA
Compatible With the selected Multi-Ply systems above kn Compatible With the selected Single Ply systems above
Key: HA= Hot Applied CA= Cold Applied HW= Heat Weldable SA= Self Adhered MF= Mechanically Fastened FA= Fully Adhered BA= Ballasted
Energy and the Environment Ilnstallation/Application
LEED® Recycled Content Pre Consumer:3.7e%DriaPost-Consumer:0/o E..__ i,
Peak Advantage®Guarantee Information Cold Applied Urethane Mechanically
Adhesive Fastened
Systems Guarantee Term*
When used in most JM multi-ply or single ply systems 10,15 or 20 years Refer to the Application Guides and Detail Drawings for instructions.
* Contact JM Technical Services for specific systems or terms over 20 years. Packaging and Dimensions
Codes and Approvals Sizes 4'x4'x1/4' 4'x8'x/'
Pss1FiF (1.22mx1.22mx6.35mm) (1.22mx2.44mx6.35mm)
1111f
® Board Weight 6 Ib(2.72 kg) 12 Ib(5.4 kg)
NIAN I.DADE COUNTY
APPROVED US Miami-DedeCoonty Coverage/Pallet 480 ft2 960 ft2
APPROVED Prod,,t Control Approved
Boards/Pallet 30 30
Pallet Weight 185 lb(83.5 kg) 370 lb(167 kg)
Pallets per Truck* 192 96
Producing Location Cornwall,ON and Jacksonville,FL
*Assumes 48'flatbed truck.
RECEIVED
Refer to the Material Safety Data Sheet and product label prior to using this product. 0 4/2 3/2 018
The Material Safety Data Sheet is available by calling(800)922-5922 or on the Web at
www.jm.com/roofing. RS-5500 4-14 epilfrce,2,14)
BUILDING DEPARTMENT
N117
INVINSA® ROOF BOARD
Johns Manville High-Density Polyiso Advantage
Meets the requirements of ASTM C 1289,Type II,Class 4,Grades 1,2 and 3
Typical Physical Properties
Test ASTM Invinsa Roof Board
11 Compression Strength D 1621 150 psi(1,034 kPa)
Flexural Strength
Modulus of Rupture D 1037 1500 psi(10,343 kPa)
v, Breakload 25 Ibf(0.111 kN)
Dimensional Stability,Linear Change D 2126 <0.6%
Moisture Vapor Permeance E 96 <1 perm(<57.5 ng/(Pa•s•m2))
Water Absorption,%by vol(max) C 209 2.0
Surface Water Absorption C 473 <1 gram
Mold Resistance D 3273 Pass
o• Weight per ft2 N/A 0.375 lb-ftz(1.83 kg-m2)
75.
• Weight per board(4'x8') N/A 12 lb
Thermal Performance
Thickness Nominal R-Value(Resistance)
in. mm (hr•ft2•°F)/BTU m2•°C/W
%4 6.35 1.2 0.21
RECEIVED
Refer to the Material Safety Data Sheet and product label prior to using this product. 0 4/2 3/2 018
The Material Safety Data Sheet is available by calling(800)922-5922 or on the Web at
www.jm.com/roofing. RS-5500 4-14lReplatr1, N
BUILDING DEPARTMENT