HomeMy WebLinkAboutFile Documents.811 Midland Park Pl.0210.2018 (3).ARBK RESIST()
vompop ,,,„"4 ,, , - ,
. .,,,,,,„„,, .
LASTOBON r,-,..:.4
:..,.,.,,7:,.:::.:.:,;.,
'� .,, ray f r�� 1 2"
PRO HT-N
f .r
,
tinµ „,,, , ..... , „
,-_,,,,. , ....es:
High performance self-adhesive underlayment for metal roofs,or as a perimeter membrane under one-ply roofing system
and asphalt shingles.It is designed to withstand temperature variations from-45°C to 90°C(-49°F to 194°F).
• Excellent resistance to temperature variations
• Easy Installation
• UV resistant;90-day exposure
PRODUCT PURPOSE PRODUCT CHARACTERISTICS
Wateproofing SBS modified bitumen
Roofing Trilaminate woven polyethylene
Outside steep slope Outside low slope Two parts silicone release film
Sheet metal Asphalt shingles (split-back)
` Bitumen membrane Self-adhesive
Plywood Asphaltic panel -45°C to 90°C(-49°F to 194°F)
L OSB J 90 days
PACKAGING
i uanti'
110107 0.91 36 20 65 1 l40 75 3 16.7 179 18.2 195 25
PROPERTIES
Roll Weight - 20 kg(44 lbs)
Breaking Strength,MD/XD ASTM D1970 11/12 kN/m(63/68 lbf/in)
Elongation at break,MD/XD ASTM D1970 30/20%
Tear Resistance,MD/XD ASTM D1970 375/400 N(84/90 lbf)
Static Puncture ASTM D5602 400 N(90 lbf)
Adhesion to plywood,4,5°C(40°F) ASTM D1970 12 kgf/30.5 cm(26 lbf/ft)
Adhesion to plywood,24°C(75°F) ASTM D1970 31 kgf/30.5 cm(68 lbf/ft)
Low Temperature Flexibility ASTM D1970 Pass at-30°C(-22°F)
Water vapour permeance ASTM E96(Procedure B) <2.1 ng/Pa.s.m2(<0.037 perm)
Nail Sealability ASTM D1970 Pass RECEIVED
For CCMC product evaluation in compliance with CSA A123.22-08.see CCMC Evaluation Listing ii 13570-L.
(All values are nominal)
08/08/2018
ASPEN
BUILDING DEPARTMENT
RESIST()
LASTOBOND
PRO HT-N
INSTALLATION
Rolls should be stored upright,tape side up.If the products are stored outdoors,cover them with an opaque
protective cover after removing the delivery packaging.
Can withstand freezing but must be reactivated to at least 5°C(41°F)before installation.
5°C(41°F)
EXTERIOR PRIMER OR H2O PRIMER
tor Knife Smoothing roller
L �' , Tape measure
The substrate must be clean,dry and free of dust,grease or other contaminants.
The use of EXTERIOR PRIMER or H2O PRIMER is not required on most surfaces when the membrane is covered
within 24 hours of installation.However,primer is mandatory when membrane is used as underlayment in a
RESIST()single-ply roofing system.
1. If conditions require,prepare the substrate with EXTERIOR PRIMER or H2O PRIMER.
2. Position the membrane parallel to the roof edge while leaving about 8 cm(3.2 in) at the front where the
gutter will be installed.
3. Fold back on itself,by half of its width,or 50 cm(20 in)over the whole length already positioned.It is
recommended to kneel on the unfolded portion of the membrane to keep it in place during this operation.
4. Remove the protective film from the folded section while placing the membrane on the support.The sef-
adhesive portion then adheres to the support.
5. Then take the other side of the membrane and repeat the previous two steps.
6. Immediately apply pressure on the membrane using a heavy metal roller or a hard rubber roller to ensure
adhesion between the support and the membrane and avoid forming bulges,folds or gaps.
Note:The transverse and longitudinal overlap should be 75 mm(3 in).
,,Refer to ROOF SYSTEM INSTALLATION for waterproofing membrane installation to roof details and upstands.
It is not recommended to use a product containing bitumen directly on softwood boards or flexible polyvinyl
L___. ,chloride.
os,r S/F
'4} --5% MIAMI-DADE COUNTY IC
f�' �� '�� 111)4ISYSTi?f�ilE QUAIITIE
�* *� APPROVED w Q„,, 9001 ;It1S0 gtoi
'FXS FLORIDA BUILDING CODE ESR-1524 C ® uS '� QIIA:'�" NFIVE1
08/08/2018
ASPEN
BUILDING DEPARTMENT
10/26/2015
PRODUCT INFORMATION SHEET
Timberline HD®Shingles
Made To Protect Your Home. Your Story.And
Those Of Over 50 Million Of Your Fellow North
Americans!
PRODUCT INFORMATION
"Value and performance in a genuine wood-shake look"
Timberline HD®Shingles Provide These Unique Benefits:
• Dimensional Look... Features GAF's • Stays In Place... Dura Grip'M Adhesive
proprietary color blends and enhanced seals each shingle tightly and reduces the
shadow effect for a genuine wood-shake risk of shingle blow-off. Shingles warranted
look to withstand winds up to 130 mph (209
• Highest Fire Rating. .. Class A fire rating km/h).'
from Underwriters Laboratories • Peace Of Mind ... Lifetime ltd. transferable
• High Performance.. . Designed with warranty with Smart Choice®Protection
Advanced Protection®Shingle Technology, (non-prorated material and installation labor
which reduces the use of natural resources coverage)for the first ten years'
while providing excellent protection for your • Perfect Finishing Touch... Use
home(visit gaf.com/aps to learn more) Timbertex®Premium Ridge Cap Shingles or
Ridglass®Premium Ridge Cap Shingles'
'This wind speed coverage requires special installation;see GAF Shingle&Accessory Ltd.Warranty for details.
'See GAF Shingle&Accessory Ltd.Warranty for complete coverage and restrictions.The word"Lifetime"refers to the length of coverage provided by
the GAF Shingle&Accessory Ltd.Warranty and means as long as the original individual owner(s)of a single-family detached residence[or the second
owner(s)in certain circumstances]owns the property where the shingles are installed.For owners/structures not meeting the above criteria,Lifetime
coverage is not applicable.
3These products are not available in all areas.See 1,.ww.gaf.com/ridgecapavailability for details.
COLORS/AVAILABILITY
• COLORS: Barkwood,Birchwood, Biscayne Blue, Canadian Driftwood,Charcoal, Copper Canyon,Driftwood,Fox
Hollow Gray, Golden Amber,Hickory, Hunter Green, Mission Brown,Oyster Gray,Patriot Red, Pewter Gray,
Shakewood,Slate, Sunset Brick,Weathered Wood,White,and Williamsburg Slate
• REGIONAL AVAILABILITY':Northeast,Southeast,Southwest,West, and Central Areas
'See htto://www.gaf.com/Roofing/Residential/Products/Shingles/Timberiine/High Definition for color availability in your area
7 4 r�E I '�r I!/
08/08/2018
ASPEN
BUILDING DEPARTMENT
10/26/2015
APPLICABLE STANDARDS & PROTOCOLS
• UL 790,Class A • ASTM D3462
• Miami-Dade County Product Control Approved— • ICC ESR-1475, ESR-3267"
130419.04(Location dependent;contact • Texas Department of Insurance
Technical Services at 800.766.3411) • CSA A123.5
• Florida Building Code Approved FL10124-R12 • ENERGY STAR®Qualified(White Only)(U.S.
• UL 997 modified to 110 mph Only)
• ASTM D7158, Class H • Title 24 Compliant, CRRC Listed,and Meets Los
• ASTM D3161, Class F Angeles Green Building Code(Birchwood,
• ASTM D3018,Type 1 Copper Canyon, Golden Amber,and White Only)
Effective 7/1/08,existing NYC MEA's may be used but are no longer required.
Obtained ESR 3267 evaluation from ICC Evaluation Services based on compliance with the requirements of AC438,an acceptance criteria
established by ICC Evaluation Services to evaluate asphalt shingles that contains performance tests In addition to those required by the building code.
(ICC Evaluation Services provides technical evaluations of building products that directly address the issue of code compliance.Building inspectors
use these evaluation reports to help determine code compliance and enforce building regulations.)
Refers to shingles sold in Canada only.
PRODUCT/SYSTEM SPECIFICSt
• Fiberglass Asphalt Construction
• Dimensions(approx.): 13 1/4"x 39 3/8"(337 x 1,000 mm)
• Exposure:5 5/8"(143 mm)
• Bundles/Square:3
• Pieces/Square:64
• Nails/Square:256(384 where 6 nails per shingle is required)tt
• StainGuard®Protection:Yes(Location dependent;contact Technical Services at 800.766.3411)
• Hip/Ridge:Timbertex®; Seal-A-Ridge®;Z®Ridge; Ridglass®8"; Ridglass®10"
• Starter:ProStart®&WeatherBlocker'.
tRefer to complete published installation instructions.
"Required by some local codes and required for enhanced wind coverage on certain products.
INSTALLATION
Detailed installation instructions are provided on the inside of each bundle wrapper of Timberline HD®Shingles.
Installation instructions may also be obtained at www.gaf.com.
RECEIVED
08/08/2018
ASPEN
BUILDING DEPARTMENT