HomeMy WebLinkAboutFile Documents.1130 Black Birch Dr.0096.2018 (74).ARBK ENERVEX
ADC100 FAN CONTROL
3912051 06.17 Product Information
Use
The ENERVEX ADC100 Appliance Draft Control is used to control
draft in systems where modulation is not required. It controls the
speed of the fan to maintain proper pressure in the chimney.The
•
ADC100 is for indoor installations only.The control can be used with ADC100
Models RS and GSV Fans.
The ADC100 is typically used to control the draft of a gas-fired
furnace,fireplace,stove, or pizza oven.
Description
The ADC100 comes with an external PDS.The PDS is a NO/NC
switch that monitors the pressure in the chimney.
The ADC100 operates a chimney fan at a set speed to create • ENERVEX
and maintain proper mechanical draft at the outlet of a heating o
appliance(s).The control provides a 10-120 VAC signal to single
phase fans,as well as a 0-10 VDC signal that can be used to control
3-phase fans by a variable frequency drive.
The ADC100 comes with an external PDS.The PDS is a NO/
NC switch that monitors the pressure in the chimney. In case of
inadequate draft,the PDS will open and if open for 15 seconds,the
control will go into alarm mode and lock out the appliance until draft
is restored.
The control features a manual and automatic adjustment mode
which is selected via dipswitch.The PDS check function and manual
or automatic reset function are also selected through a dipswitch.
An integrated damper relay allows a damper to be connected Listings
directly to the ADC100.The control ensures that the damper is fully The ADC100 Fan Control is ETL Listed in the U.S. and Canada:
open before allowing the appliance to operate by interlocking the
damper end-switches to the control. In the event that the controller •
UL 508 Standard for Industrial Control Equipment(17th Ed.)
senses any mechanical failures,the control will initiate a retry • CSA C22.2 No. 14-05-Standard for Industrial Control Equipment
sequence.
Warranty
Material 2-Year Factory Warranty. Complete warranty conditions are available
The enclosure is made of NEMA 1 rated ABS plastic. from ENERVEX Inc.
Standard Equipment
• ADC 100 Control Box
• PDS Proven Draft Switch Box
• Stack Probe
• 6' Silicone Tubing
c ETA us
GISTE�
Intertek Specifications are subject to change without notice. RECEIVED
ENERVEX Inc. P:770.587. 3 E N E RV E X 2 18
1685 Bluegrass Lakes Parkway F:770.587.474731
Alpharetta,GA 30004 T:800.255.2923
USA info@enervex.com VENTING DESIGN SOLUTIONS
www.enervex.com ASPEN
BUILDING DEPARTMENT
ENERVEX
ADC100 FAN CONTROL
3912051 06.17 Product Information
Specifications
ADC100 Control
Power Supply V 1 x120VAC
Amperage A 7.0 A
Operating Temperature °F/°C -4 to 122/-20 to 50 0 ADC100
Control signal mA Max. 10
Control relay Max. 120 VAC/8A
VAC 10-120 B
Output —
VDC 0-10
Post Purge Time 0-3 Minutes
Alarm Delay Time 15 Seconds ® ENERVEX
A in/mm 9.6/244
Dimensions B in/mm 6.3/160
C in/mm 3.5/90 I--1
Weight lbs/kg 2.6/1.2
Stack Probe —1 I.
H in/mm 4.25/108 H C
Dimensions
I in/mm 3.50/89
fi II
_r s
4-4
ADC1 00 Fan Control
RECEIVED
ENERVEX Inc. P:770.587.3238E N E RV E 2 18
1685 Bluegrass Lakes Parkway F:770.587.474731
Alpharetta,GA 30004 T:800.255.2923
USA info@enervex.com VENTING DESIGN SOLUTIONS
www.enervex.com ASPEN
BUILDING DEPARTMENT