HomeMy WebLinkAboutFile Documents.926 Waters Ave.0176.2018 (11).ARBK HALO®
Description
Recessed 4"aperture ultra-shallow housing for use with LED integrated trims. Catalog# Type
Installs from below the ceiling and suitable for 2x4 residential or shallow
plenum commercial construction.Suitable for direct contact with insulation; Project
airtight rating reduces airflow between living spaces and unconditioned
areas providing additional energy savings. Use with compatible Halo®LED
integrated trims and modules providing general,task and accent lighting when Comments Date
energy savings, long life and optical control are required. I
Prepared by
Specification Features
,Housing Junction Box Code Compliance
• Die formed aluminum housing can • (2) 1/2"trade size pry outs and(2) • Type IC inherently protected,
be installed from below the ceiling Slide-N-SideTM wire traps for non- suitable for direct contact to air • 1
and accommodate ceilings from metallic cable. permeable insulation and cULus
3/8"—3/4"thick. • Accepts 14/2, 14/3, 12/2, 12/3 listed for damp locations. '
• Shipped with paint overspray (US)and 14/2, 14/3, 12/2(Canada) • Not for use in direct contact with I
protector installed. standard non-metallic sheathed spray foam insulation,consult NEMA
cable. LSD57-2013.
I
Mounting Springs • Maximum of(6)#12 or(8)#14 • Wet location listed in covered
______ _
• Captive preinstalled mounting conductors rated for 90°C permitted ceilings and IP56 certified with
springs retain housing securely in in box(10in3 internal volume). select lens trims.
ceiling. • Wago®push wire connectors for • Airtight per ASTM-E283.
• Housing can be removed for service field connections. • Can be used for State of California
or splice inspection. Title 24 high efficacy luminaire H245RICAT
Connector compliance with designated
Gasket • Two-conductor wire mount integrated LED trims.
• Closed cell gaskets achieve connector is rated for 120-277V and 4" Ultra-Shallow
restrictive airflow requirements mates with Halo®LT4, RL4, RA4 Suitable for use in clothes closets Recessed Remodeler
when installed in accordance
without additional caulking. and ML4 family of LED integrated with the NEC 410.16 spacing Housing
trims. requirements.
• CAUTION—verify LED module input
voltage is compatible with the input
voltage of the housing. LED Integrated Trims
• If uncertain,consult a qualified 15W Maximum
electrician.
Dimensions
ts\
22.24 m"
1 8 8
Ii HALO®
a n . ..
8'
8 8 [203.76mm]
i//t
VII O
-_-_. 3-314"
/ I \ 195.36mm]
1
4-1/16'
[103.17mm]
Ordering Information
A complete luminaire consists of a housing,LED module and trim,order separately.
Housing Trims Accessories
H245RICAT=4"ultra-shallow remodeler housing for LED LT4 Family H4NCMF=4"new construction mounting frame
integrated trims RA4 Family
RL4 Family
ML4 Family
RECEIVED
Eaton 8 7 2 m$Z 8
1121 Highway 74 South
_ Peachtree City,GA 30269 Specifications and P:770-486-4800 g g dimensions subject to ,r^�� 8163E N
Powering Business Worldwide www.eaton.com/li htin change without notice. AO e 30,2016
BUILDING DEPARTMENT