HomeMy WebLinkAboutFile Documents.211 Cottonwood Ln.0062.2019 (110).ARBK Residential Design Standards
Administrative Compliance Review Staff Checklist - Single Family and Duplex I ASPEN
Address:211 Cottonwood Lane
Parcel ID:273707490211
Zone District/PD:R-3/ PD pp Kevin Digitally Rayes signed by
Approved:roved Kevin
Representative:Paul Irwin Ra eS Date: 2019.03.13
aul rl ledesi nstudios.us (Approved plans/elevations attached) f� y 09:13:33 -06'00'
Email:p @ pp 9
Phone:719-221-3232
Disclaimer: This application is only valid for the attached design.If any element of the design subject to Residential Design Standards changes prior to or during building permit review, the
applicant shall be required to apply for a new Administrative Compliance Review.
Standard Co Alter'nve Does NIA Sheet#(s)/Notes
1111. 1
6. Compliance `Comply
____T
-
r Lot is the Aspen Infill Area.
B.1.Articulation of Building Mass outsidep
(Non-flexible)
1
B.2.Buildin Orientation
(Flexible) V Proposed structure has a moderate orientation to the street, see sheet
A1 .4.
oem
B.3.Build-to Requirement through
Stafffinds thethat integrationtheprop of ased frontdw porch
lling andmeets walkwaythegeneral that relateintent tostate the ents streeoft.Thesethe featuresResidential contribute
Design to theStandards
(Flexible) V buildings"connection to the street"and establish"a sense of continuity through building form and setback along
the streetscape."
B.4.One Story Element One story step down used to satisfy requirements of this section, plate height of one
r Vstory element shown at 8' and measures -8'8" wide which is greater than 20% of the
(Flexible) overall building width, see sheet A4.1.
C.1.Garage Access r Property does not have access from private street or alley.
(Non-flexible) ✓
C.2.Garage Placement No garage shown.
(Non-flexible) ✓
C.3.Garage Dimensions No garage shown. RECEIVED
(Flexible) V
03/27/2019
Pa c• 1 of
ASPEN
BUILDING DEPARTMENT
Approved: Residential Design Standardsili
Administrative Compliance Review Staff Checklist THE CITY OFASPEN
Disclaimer: This application is only valid for the attached design.If any element of the design subject to Residential Design Standards changes prior to or during building permit review, the
applicant shall be required to apply for a new Administrative Compliance Review.
Complianril I Illiiir Sheet#(s)/Notes
C.4.GarageDoorDesign II No garage shown.
(Flexible) II ✓
Il
D.1.Entry Connection [V Proposed structure has a street oriented entrance.
(Non-flexible)
D.2.Door Height 1
(Flexible) ✓ [ Front door height measures less than 8'. see sheet A3.1 .
D.3.EntryPorch No entry porch exists.
(Flexible) ✓
E.1.Principle Window ✓ Front window to the right of the front most facade measures more than
(Flexible) 2'x4', see sheet A3.1.
E.2.WindoPlacement V
No street facing window measures more than 1 story, see sheet A3.1 .
(Flexiblexible))
E.3.Nonorthogonal Window Limit ✓ No nonorthogonal windows exist.
(Flexible)
E.4.Lightwell/Stairwell Location ✓ No window or light wells are proposed between the front most facade
(Flexible) + and the street. see sheet A2.1 .
� I
E.5.Materials Materials are used true to their character and are used consistent
(Flexible) V I [ all sides of the structure. see sheet A3.1 . Lt,,r VF t, ,
03/27/2019
Pa 2 r,t
ASPEN
BUILDING DEPARTMENT