HomeMy WebLinkAboutFile Documents.211 Cottonwood Ln.0018-2020-BCHO (4) Updated drawings provided as a result of design
changes during the permitting process.The changes
do not affect any RDS standards or the Alternative
Compliance administrative approval.An updated
plan set and checklist have been provided in order Residential Design Standards
to track the changes from the original approval.The Adieu
conditions of the administrative approval still apply. Compliance Review Staff Checklist - Single Family and Duplex CIT,OFA5pEN
Address:211 Cottonwood Lane
Parcel ID:273707490211
R-3/ PD Digitally signed by
Zone District/PD: Approved: Garrett Larimer
Representative:
Paul Irwin I"1" Garrett LarimerDN:CN=GarrettLarimer
Date:2020.02.
(Approved plans/elevations attached) 117:37:25-07 0026
Email:paul@rippledesignstudios.us
Phone:719-221-3232
Disclaimer: This application is only valid for the attached design.If any element of the design subject to Residential Design Standards changes prior to or during building permit review, the
applicant shall be required to apply for a new Administrative Compliance Review.
Standard CompliesAlter'nve Does NIA 1111. Sheet#(s)/Notes
1111. 1
6. Complianc,e `Comply
____T
-
r Lot is the Aspen Infill Area.
B.1.Articulation of Building Mass outsidep
(Non-flexible)
B.2.Building Orientation Proposed structure has a moderate orientation to the street, see sheet
(Flexible) V A1 .4.
oem
B.3.Build-to Requirement throughStafffinds the
that integrationtheprop of ased frontdw porch
lling andmeets walkwaythegeneral that relateintent tostate the ents streeoft.Thesethe featuresResidential contribute
Design to theStandards
(Flexible) V buildings"connection to the street"and establish"a sense of continuity through building form and setback along
the streetscape."
B.4.One Story Element One story step down used to satisfy requirements of this section, plate height of one
r Vstory element shown at 8' and measures -8'8" wide which is greater than 20% of the
(Flexible) overall building width, see sheet A4.1.
C.1.Garage Access r Property does not have access from private street or alley.
(Non-flexible) ✓
C.2.Garage Placement No garage shown.
(Non-flexible) ✓
C.3.Garage Dimensions No garage shown.
(Flexible)
I'a 1 of
p"lel"sbnes b,
Os.Ismer
°'rretWiner u r.ret` Residential Design Standards rar1TiliAdministrative Compliance Review Staff Checklist THE CITY OFASPEN
Disclaimer: This application is only valid for the attached design.If any element of the design subject to Residential Design Standards changes prior to or during building permit review, the
applicant shall be required to apply for a new Administrative Compliance Review.
Complianril I Illiiir
Sheet#(s)/Notes
C.4.Garage Door Design II No garage shown.
(Flexible) 1_ ] I I ✓
I
D.1.EntryConnection [,i Proposed structure has a street oriented entrance.
(Non-flexible)
D.2.Door Height [I/ Front door height measures less than 8', see sheet A3.1 .
(Flexible)
D.3.EntryPorch No entry porch exists.
(Flexible) ✓
E.1.Principle Window Front window to the right of the front most facade measures more than
(Flexible) 2'x4', see sheet A3.1.
E.2.WindowPlacement V
No street facing window measures more than 1 story, see sheet A3.1 .
(Flexibleexible))
E.3.Nonorthogonal Window Limit No nonorthogonal windows exist.
(Flexible)
E.4.Lightwell/Stairwell Location No window or light wells are proposed between the front most facade
(Flexible) + and the street. see sheet A2.1 .
r
E.5.MaterialsI V [ Materials are used true to their character and are used consistently on
(Flexible) all sides of the structure. see sheet A3.1 .
Pa 2 Ot 2