HomeMy WebLinkAboutFile Documents.754 Moore Dr.0034.2018 (12).ARBK RECEIVED VED Drawings A0.4 and A1.1 have been resubmitted per Zoning Department request. Fence and gate
e.s !� that were previously shown at the driveway have been removed and site wall heights have been
1/2/2019 added to A1.1
0034-2018-ARBK BuildingComments 2
v';, — —
BUILDI&'nerg-y Gode•Compliance_REScheck.754 Moore Drive_compliance-report-20180915.pdf(5)
Page: 1 Revise RESch k to include the
File Name: Energy Code Compliance_REScheck.754 Moore
Drive_compliance-report-20180915.pdf frost protecte shallow
"°°°E
° Subject: PlanCheck foundation ab shown in detail
,„, :Revise7.t.ckbincluEe the hoar
Author: nickt 6/A7.10
�.n.tlanaiiow�°tl.ioaiaean , Color: •
.In tlebil6lA1.10.
See revised insulation depth to accurately represent shallow
foundation as indicated under "Floor(F-1/F4b)-Main Level SOG"
Page: 2 W-7, W-8,W-9b, W- , and
File Name: Energy Code Compliance_REScheck.754 Moore likely others call for 13 cavity
Drive_com pl iance-report-20180915.pdf
Subject: PlanCheck and R-10 continu s.W-9a calls
_ - Author: nickt for R-13 cavity ly. I don't see
e_= Color: • these in the R scheck.
See revised spray foam insulation depths and associated R-values revised in t e following wall assemblies
to coordinate w/values represented in REScheck;W-7,W-8,W-8b,W-9b,and W-11.To clarify the
comment associated to wall type"W-9a" indicating R-13 cavity insulation only-I believe this comment
should actually apply to wall assembly type W-8a which is showing R-13 cavity only.This wall type is only
used at chimney locations which exists outside of the buildings thermal envelope.
--_, »° w° - - ° Page: 3"`"°""-" " "° Sign the Resche
_ - ` File Name: Energy Code Compliance_REScheck.754 Moore
-`"-_,—w-" " '' - ,_ Drive_compliance-report-20180915.pdf
Subject: PlanCheck Signature ad ed.
._:; ,._.,::::. ; , ,:._v= ...� Author: nickt
( Color: •
Page: 3 Some of your basement w s
File Name: Energy Code Compliance_REScheck.754 Moore
Drive_compliance-report-20180915.pdf have only R 19 cavity and o
--s== ._ Subject: PlanCheck continuous insulation (W b).
Author: nickt Wall assembly type W-1b/A7.1 only occurs as previously indicated o heet A2.0 on the
_= ---- - Color: • West wall of A/V 036 near the exterior access stair for the baseme -this wall
assembly has been revised to type W-2 to maintain consistency. dditionally,Wall type
W-lb has been noted as"Not Used".
Wall assembly types W-3 and W-3a/A7.1 only occurs on the ast and South walls of the
egress well outside of the buildings thermal envelope.This
Page: 3 Label all walls, roof ,floors, etc
File Name: Energy Code Compliance_REScheck.754 Moore in the Rescheck w' h the
Drive_compliance-report-20180915.pdf
Subject: PlanCheck wall/roof/etc call t. For
Author: nickt example, labe a crawlspace
Color: ■ walls W-1.
See revised REScheck for all associated assembly types i icated in parenthesis.