HomeMy WebLinkAboutFile Documents.216 S Monarch St.0055.2019 (62).ACBKItem # C.S.I. Section 11420
FRYERS
P.O. Box 696 ■ Louisville, KY 40201 ■ Toll-free: 1-800-814-2028 ■ Local: 502-778-2791 ■ Quote & Order Fax: 1-800-444-0602
a division of ITW Food Equipment Group LLC
F32629 (10/18)
SPECIFICATIONS
35 - 40 lbs. capacity free standing model gas fryer, Vulcan Model
No. 1GR35M. Stainless steel cabinet. Set of four 6" adjustable
casters. Stainless steel fry tank with three heat exchanger tubes
and a “V” shaped cold zone. 1¼" full port ball type drain valve.
Twin fry baskets with plastic coated handles. 90,000 BTU/hr. input.
Behind the door millivolt snap action thermostat control adjusts
from 200° to 400°F.
Overall Dimensions:
151⁄2"w x 301⁄4"d x 471⁄8"h working height 361⁄4".
CSA design certified. NSF listed.
SPECIFY TYPE OF GAS WHEN ORDERING
Natural Gas
Propane Gas
SPECIFY ALTITUDE
Natural Gas for above 2000 ft.
Propane Gas for above 3500 ft.
1GR35M: Behind the door millivolt thermostat control adjusts
from 200° to 400°F.
STANDARD FEATURES
■Stainless steel fry tank, 35 - 40 lbs. capacity.
■11⁄4" full port ball type drain valve.
■Stainless steel cabinet.
■Set of four 6" adjustable casters (2 locking).
■Twin fry baskets with plastic coated handles.
■90,000 BTU/hr. input.
■Three heat exchanger tubes positioned for easy cleaning.
■Hi-limit shut-off.
■Combination gas shut-off valve and pilot safety system.
■Tank brush, stainless steel crumb scoop and clean-out rod.
■One year limited parts and labor warranty.
ACCESSORIES (Packaged & Sold Separately)
FRYMATE-VX15 add-on frymate.
Stainless steel tank cover – doubles as a work surface top.
Connecting Kit(s) – Connects two fryers together (brackets,
grease strip and hardware included).
Single large basket – 13"w x 131⁄4"d x 51⁄2"h.
Set of twin baskets – 61⁄2"w x 131⁄4"d x 6"h.
3⁄4" Flexible gas hose with quick disconnect.
10" high stainless steel removable splash guard.
OPTIONS
Second year extended limited parts and labor warranty.
1GR35M
FREE STANDING GAS FRYER
06/20/2019
P.O. Box 696 ■ Louisville, KY 40201 ■ Toll-free: 1-800-814-2028 ■ Local: 502-778-2791 ■ Quote & Order Fax: 1-800-444-0602
a division of ITW Food Equipment Group LLC
FRYERS
F32629 (10/18)
Gas Inlet
1⁄2" NPT
11.50
1.94 7.58
5.81
1GR35M
FREE STANDING GAS FRYER
INSTALLATION INSTRUCTIONS
3. All models require a 6" (152 mm) clearance at both sides and rear
adjacent to combustible construction.
4. All models require a 16" (407 mm) minimum clearance to adjacent
open top burner units.
5. This appliance is manufactured for commercial installation only
and is not intended for home use.
SERVICE CONNECTIONS:
1⁄2" (13 mm) ID and 3⁄4" (19 mm) OD rear gas connection.
NOTE: In line with its policy to continually improve its product,
Vulcan reserves the right to change materials and specifications
without notice.
1. A combination valve with pressure regulator is provided with this
unit.
• Natural Gas
Operating pressure – 4.0" W.C.
Recommended supply pressure 7-9" W.C.
Not to exceed 14" W.C. (1/2 PSI)
• Propane Gas
Operating pressure – 10.0" W.C.
Recommended supply pressure 11-12" W.C.
Not to exceed 14" W.C. (1/2 PSI)
2. An adequate ventilation system is required for Commercial
Cooking Equipment. Information may be obtained by writing to
the National Fire Protection Association, Batterymarch Park,
Quincy, MA 02269. When writing refer to NFPA No. 96.
Model Width Depth
Overall
Height
Working
Height Tank Size BTU/HR
Fry Comp.
Capacity
Approx.
Shipping Weight
1GR35M 151⁄2"301⁄4"471⁄8"361⁄4"14" x 14"90,000 35 - 40 lbs.215 lbs.
This appliance is manufactured for commercial use only and is not intended for home use.
44.50
Door Open
10.00
Tank Back
36.29
11.28
6.25 +1.00
-.004.81
14.97
47.14
4.89
30.19
15.50
06/20/2019