The URL can be used to link to this page

Home My WebLink AboutFile Documents.533 W Hallam St.0031-2022-BCHO (8)Page 1 of 4 SAFETY DATA SHEET WrapShield® IT Integrated Tape Issue Date 2019.01.04 Revision Date: 2020.08.28 Revision Number 2.0 SECTION 1 – PRODUCT IDENTIFICATION Product Identifier Product Name: WrapShield® IT Integrated Tape WrapFlashing™ Rolls Other means of identification Other Names/Synonyms: Part No. 16109000 / 4010550 / 40108000 Recommended use of the chemical and restrictions on use Recommended use: Restricted to professional users as a breathable water resistance barrier air barrier (WRB/AB) for use in building construction. Uses advised against: No information available Details of the supplier of the safety data sheet Supplier Address: VAPROSHIELD, LLC 915 26TH Ave. NW, #C-5 Gig Harbor, WA 9335 866-731-7663 Emergency telephone number Product Information: 8:00 AM – 5:00 PM PST Monday-Friday 1-866-731-7663 24 hour Emergency Contact: 24/7 CHEMTREC: 1-800-424-9300 or 1-703-527-3887 SECTION 2 – HAZARDS IDENTIFICATION EMERGENCY OVERVIEW: This product has no known adverse effect on human health Classification: This chemical is not considered hazardous by the 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200) Skin sensitivity Category 0 Serious eye damage/eye irritation Category 0 Reproductive toxicity Category 0 Label Elements EMERGENCY OVERVIEW: Hazard statements This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. Additives in this product do not present a respiration hazar d unless the product is ground into a respirable size power and the dust inhaled. All dusts are potentially injurious to the respiratory tract if respirable particles are generated and inhaled. Dust may form an explosive mixture in the air. Appearance: Black Sheet Physical state: Solid Sheet membrane Odor: Slight PRECAUTIONARY STATEMENTS: The use personal protective equipment in not required; Avoid breathing if respirable particles are generated RESPONSE: Not applicable STORAGE: Not applicable DISPOSAL: Dispose of contents to an approved waste disposal plant Hazards not otherwise classified (HNOC) Other Information Not applicable PHYSICAL DESCRIPTION: This product is bonded polymer sheets of spun bonded moisture resistant polypropylene. 05/17/2022 Page 2 of 4 SAFETY DATA SHEET WrapShield® IT Integrated Tape Issue Date 2019.01.04 Revision Date: 2020.08.28 Revision Number 2.0 HEALTH HAZARDS: This product does not present a respiration hazard unless ground to a powder of respirable size and the dust is inhaled. All dusts are potentially injurious to the respiratory tract if respirable particles are generated and inhaled. Dust may form explosive mixture in air. FLAMMABILITY HAZARD: This product has a class A fire rating. REACTIVITY HAZARD: This product is not reactive. ENVIRONMENTAL HAZARD: This product has not been tested for environmental impact. 0 = Minimal 3 = Serious 1 = Slight 4 = Severe 2 = Moderate * = Chronic SECTION 3 – COMPOSITION/INFORMATION Component CAS-No. Weight - % Polypropylene 9003-07-0 >99% Additives Proprietary <1% SECTION 4 – FIRST AID MEASURES Emergency Overview: This product does not present a respiration hazard unless the product is ground to a powder of respirable size and inhaled as dust. INHALATION: If dusts of this material are inhaled, remove victim to fresh air. If necessary, use artificial respiration to support vital functions. SKIN EXPOSURE: Generally the product is not a skin irritant. EYE EXPOSURE: Generally the product is not a skin irritant. INGESTION: In the case of an ongoing complaint consult a doctor. SECTION 5 – FIRE-FIGHTING MEASURES Flash point: Not Applicable Auto ignition temperature: 330 - 350 °C (626 - 662 °F) Fire and Explosion Hazard: Burning is accompanied by melting and dripping which may cause the fire to spread. Hazardous combustion products: Nitrogen Oxide, Carbon Monoxide, Carbon Dioxide. Firefighting Instructions: Wear self-contained breathing apparatus and protective suit. Use extinguishing measures that are appropriate for any surrounding fires. SECTION 6 – ACCIDENTAL RELEASE MEASURES NOTE: Use appropriate personal protective equipment as needed during clean-up. Spill Cleanup: Not Applicable Handling: Minimize the generation and accumulation of dust. Health 0 Flammability 1 Physical Hazard 0 05/17/2022 Page 3 of 4 SAFETY DATA SHEET WrapShield® IT Integrated Tape Issue Date 2019.01.04 Revision Date: 2020.08.28 Revision Number 2.0 SECTION 7 – HANDLING AND STORAGE Handling: Material can create slippery conditions. Storage: No special conditions. Keep away from sunshine. Keep away from sources of ignition – do not smoke. SECTION 8 – EXPOSURE CONTROLS/PERSONAL PROTECTION Personal Protection Equipment Respiratory Protection: Respiratory protection should not be required under normal use and handling. When workers are facing concentrations above the exposure limit they must use appropriate certified respirators. Exposure Guidelines Exposure Limit Values Chemical Name PEL (OSHA) TLV (ACGIA) Polypropylene 5 mg/m3 8 hr. TWA Respirable fraction 15 mg/m3 hr. TWA Total dust 3 mg/m3 8 hr. TWA Respirable particles 10 mg/m3 8 hr. TWA Inhalable particles SECTION 9 – PHYSICAL AND CHEMICAL PROPERTIES Form: Sheets roll Color: Orange facer, white back Odor: None Melting point/range: 130 - 170 °C (329 - 338 °F) Auto ignition temperature: The product is not self-inflammable SECTION 10 – STABILITY AND REACTIVITY Hazardous decomposition products: Carbon monoxide, Carbon dioxide, hydrogen bromide, hydrocarbons and other possible toxic combustion products. SECTION 11 – TOXICOLOGY INFORMATION Oral LD50: > 7,000 mg/kg (rat) Skin Irritation: non-irritant Eye Irritation: non-irritant Skin Sensitization: not a skin sensitizer Further Information: The product is a polymer and has no known adverse effect on human health. 05/17/2022 Page 4 of 4 SAFETY DATA SHEET WrapShield® IT Integrated Tape Issue Date 2019.01.04 Revision Date: 2020.08.28 Revision Number 2.0 SECTION 12 – ECOLOGICAL INFORMATION Additional Ecological Information: In general this product is not dangerous to water, do not disperse in the environment. This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (VPvB) at levels of 0.1% or higher. SECTION 13 – DISPOSAL CONSIDERATIONS Waste Disposal: The polypropylene portion is 100% recyclable. Recycling is preferred to disposal or incineration. Can be landfilled or incinerated in compliance with Federal, State and Local regulations. SECTION 14 – TRANSPORTATION INFORMATION DOT Not regulated. Not classified as dangerous for transport regulations. SECTION 15 – REGULATORY INFORMATION SARA section 313: This product contains no known chemical components that exceed the threshold reporting levels established by SARA Title III, Section 313. California Prop. 65: This product does not contain chemicals known to the State of California to cause cancer, birth defects or any other harm. SECTION 16 – OTHER INFORMATION NFPA Health hazards: 0 Flammability: 0 Instability: 0 Physical / chemical Hazard: - HMIS Health hazards: 0 Flammability: 0 Physical hazards: 0 Personal protection: - Prepared By Regulatory Department Issuing Date 28-August-2020 Disclaimer Information provided in this Safety Data Sheet is given in good faith and is, to the best of our knowledge and belief, accurate and reliable. However, since information herein was obtained, in part, from independent suppliers not under the direction and supervision of VAPROSHIELD, the information given is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. VAPROSHIELD warrants only that it has made no effort to censor other than trade secret inform ation or to conceal deleterious aspects of its products. The information relates only to the specific material designated and may not be valid for material used in combination with other materials or in any process, unless noted in the text. End of Safety Data Sheet 05/17/2022