The URL can be used to link to this page

Home My WebLink AboutFile Documents.334 Summit St.0061.2019 (5).ARBKThe City of Aspen These plans must be kept at the building site or inspection delays may occur. Construction shall conform to these plans. All changes shall be approved by the building official. Field Plan Set Must Be Printed In Color SEPARATE PERMITS ARE REQUIRED FOR ELECTRICAL, PLUMBING, MECHANICAL, OR FIRE SPRINKLER WORK 04/01/2019 03/19/2019 04/12/2019 justinh Residential Stairway, Handrail and Guard Requirements (IBC): - 80" minimum headroom (IBC 1011.3) - Max riser height 7-3/4", min tread depth 10" (IBC 1011.5.2) - Stair treads and riser shall be dimensionally uniform, max tolerance is 3/8" variation (IBC 1011.5.3) - Landings required at the top and bottom of all stairs, width shall be equal to width of stair and depth shall be equal to the width of the stair but shall not be required to exceed 48" (IBC 1011.6) - Handrails provided on at least one side of all stairs with more than 4 or more risers, 34" - 38" in height, complying as a type I or type II handrail, and being continuous between the top and bottom risers (IBC 1014) - Guards shall be 36" tall and restrict the passage of a 4" sphere (6" sphere at the triangular opening formed by the riser, tread and bottom rail of the guard) (IBC 1015) READ THIS OR FAIL YOUR INSPECTION! Furred & Dropped Ceilings, Soffits, and Walls 20015 IBC 803.13 This applies to the attachment of finishes or furring to any assemblies that are required to be either fire-rated or non-combustible and is separate from the fire-rated assembly requirement. Walls, Ceilings & Soffits: If furred 1 ¾ inches or less, do one of the following: 4.Fill spaces with Class A material. 5.Fill spaces with inorganic or non-combustible material. 6.Fire block 8 feet in all directions. Walls: If set out (furred) greater than 1 ¾ inches, do one of the following: 4.Use a Class A finish material (such as drywall). 5.Use non-combustible framing. 6.Protect both sides with fire sprinklers. Ceilings & Soffits: If dropped (furred) greater than 1 ¾ inches: Framing members, hangers, and other assembly members must be non-combustible. You may not use wood. In Type III and V construction only, you may use fire retardant treated wood or non-combustible framing. Any recessed light fixtures in contact with insulation must be IC rated. Recessed luminaires installed in building thermal envelope shall be sealed and IC-rated– IECC sec R402.4.5 03/19/2019 0061.2019.ARBK X PL 3.20.19 X X X X 3,428.75 162.50 162.50 5,275.00 525.00 375.00 Unit A L 0 0 0 0 0 JRB 4/1/19 JH 4/12/19 JH 4/12/19 03/19/2019 03/19/2019 x x x 3 2640 JH 04/12/2019 justinh SMOKE ALARMS AND CARBON MONOXIDE DETECTORS REQUIRED THROUGHOUT DWELLING UNIT PER CITY OF ASPEN MUNICIPAL CODE 8.15 DAM 4/15/19