HomeMy WebLinkAboutFile Documents.747 S Galena St.0122.2019 (21).ARBKTD518095EN
January 27, 2017
DESCRIPTION
The H995ICAT is a dedicated LED small aperture IC AIR-TITE™
housing for use with compatible Halo 4-Inch LED modules.
It is designed for use in insulated ceilings where it will be in
direct contact with insulation*. It is an AIR-TITE™ housing
designed to prevent air flow between occupied spaces and
unconditioned areas.
Housings
• Double wall aluminum
construction helps dissipate heat.
The inner housing can be adjusted
in the plaster frame to compensate
for different ceiling materials.
• Designed for insulated ceilings
in direct contact with insulation*.
(May also be installed in
non-insulated ceilings.)
Plaster Frame
• Galvanized steel die-formed
construction.
• The inner housing can be removed
from plaster frame to provide
access to the junction box.
• Plaster frame features include:
- Patented regressed locking
screw positioned for securing
hanger bars from below the
ceiling.
- Cutouts for easily crimping hanger
bars in position.
- AIR-TITE aperture gasket is
pre-installed.
- HALO identity embossed on
plaster frame
Slide-N-Side™ Junction Box
• Positioned to accommodate
straight conduit runs
• Seven 1/2” trade size conduit
knockouts with true pry-out slots
• Slide-N-Side wire traps allow
non-metallic sheathed cable to be
installed without tools and without
removing knockouts.
• Accepts a wide range of non-
metallic (type NM) sheathed
cables - the standard cable types
used in lighting in both U.S. and
Canada.
- Allows wiring connections to be
made outside the junction box
- Simply insert the cable directly into
the trap after connections are
made.
- Accommodates the following
standard non-metallic sheathed
cable sizes:
(US) #14/2, #14/3, #12/2, #12/3
(Canada) #14/2, #14/3, #12/2
“Quick Connect” Connectors
Three quick connect wiring
connectors included.
GOT NAIL! Pass -N-Thru™
Bar Hangers
• Pre-installed nail easily installs
in regular lumber, engineered
lumber and laminated beams.
• Safety and guidance system
prevents snagging, ensures
smooth straight nail penetration
and allows bar hangers to be easily
removed if necessary.
• Automatic levelling flange aligns
the housing and lets you hold the
housing in place with one hand
while driving nails.
• Housing can be positioned at any
point within 24” joist span.
• Pass-N-Thru™ feature allows bar
hangers to be shortened without
removing from plaster frame.
• Score lines allow “tool-less”
shortening for 12” joists.
• Integral T-bar clip snaps onto
T-bars - no additional clips
required
LED Module Connection
Halo LED modules simply install
with a plug-in 120V line voltage
wiring connector (UL and CSA
Listed Luminaire Disconnect). This
non-screw-base LED connection
preserves the high efficacy rating
of the luminaire (see also LED
Module specifications).
Two-conductor wire mount
connector is rated for 120 - 277V and
mates with Halo® LT4, RL4, RA4
and ML4 family of LED integrated
trims.
Warranty
Eaton provides a five year limited
warranty on Halo LED
Luminaires which includes the LED
Recessed Housing, and LED module.
Labels
• UL/cUL Listed 1598 Luminaire
• UL/cUL Listed for Damp Location
• UL/cUL Listed for Wet Location,
with select trims
• UL/cUL listed for Feed Through
• UL/cUL listed for Direct Contact
with insulation and combustible
material*
Compliance
• Use with designated LED light
engines and trims for ENERGY
STAR® certification.
• Can be used for State of California
Title 24 high efficacy compliance
with designated LED modules.
• Can be used for International
Energy Conservation Code (IECC)
high efficacy compliance with
designated LED modules.
Qualification
IC and AIR-TITE™
Certified under ASTM-E283 and
listed UL/cUL 1598. May be used
to meet insulated ceiling* and
restricted air-flow requirements
such as:
• Washington State Energy Code
• International Energy Conservation
Code (IECC)
• New York State Energy
Conservation Construction Code
(NY-ECCC)
• State of California Title 24
“Recessed Luminaires in Insulated
Ceilings.”
* Not to be used in direct contact
with spray foam insulation.
DESIGN FEATURES
H995ICAT
4-Inch New Construction
Insulated Ceiling AIR-TITE™
Recessed Housing
For Halo 4-Inch
LED Modules
High Efficacy LED Housing
FOR USE IN
INSULATED CEILINGS
FOR DIRECT CONTACT
WITH INSULATION*
ALSO SUITABLE FOR
NON-IC CEILINGS
Catalog #
Project
Comments
Prepared by
Type
Date
HALO®
DIMENSIONS
5-1/4 inch
(133 mm)
8-1/2 inch
(216 mm)
1/2 inch
(13 mm)
4-3/8 inch
(111 mm)
Ceiling opening
5-1/2 inch
(140 mm)
Refer to ENERGY STAR®
Certified Products List
and CEC (T20) Database
for listings.
05/21/2019
H995ICAT
Eaton
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.eaton.com/lighting
Specifications and
dimensions subject to
change without notice.
Ordering Information
Sample Number: H995ICAT
Order housing, LED module, and trim separately.
Housing
H995ICAT = 4” IC, Air-Tite, New Construction, LED Housing
Ordering Information
The H995ICAT housing may also be used with Halo LED Modules and Surface LED Series.
LED Modules:
Compatible LED Series
RA4
RL4
LT4
SLD4
ML4
For details and ordering information refer to LED product specifications at www.eaton.com/lighting.
05/21/2019