HomeMy WebLinkAboutFile Documents.230 E Hopkins Ave.0046-2020-BCHO (5)Specifications for Project
REMINDER:
Specifications are subject to change. If any tradesperson has questions regarding the attached specifications please contact our sales associate.
Powered by SteelCod
To ensure a smooth project it is the responsibility of the homeowner / purchaser of appliances for this project to share all the attached specifications to ensure the cabinet provider, contractor, or any other tradesperson have all the information required to complete their work accurately.
Salesperson
Amy Boutwell
amyb@alpineappliance.com
MOUNTAIN FORGE PROJECT
MADIGAN & COMPANY
04/13/2021
Full Spec Package
Note about page numbers:
Because the original manufacturer's documents are not altered in any
way, the page numbers displayed on the page may not correspond to
the page number within this package.
All specifications are intended for initial planning purposes only.
Manufacturers reserve the right to change specifications at any time
without notice. Always consult the installation instructions found on the
manufacturer’s website or included with the appliances before
installation.
MOUNTAIN FORGE PROJECT
MADIGAN & COMPANY
230-234 E. HOPKINS AVE
ASPEN,CO 81611
Alpine Appliance Center
alpineappliance.com
Amy Boutwell
970-688-4568
Quote 109334
Version 2.2
Fri, Feb 19, 2021
9:30 AM MST
enterprise.steelcod.com/sp/alpn/IV600UTD
Models Pages
TERMS 3
Alpine Appliance Terms and Agreements
GDE25ESKSS 4-5
GE Refrigeration
DBI663IS 6-7
Asko Dishwasher
JES2051SNSS 8-9
GE Microwave
Alpine Appliance Center
780 Nottingham Rd, Avon, CO 81620
160 South Side Drive, Basalt, CO 81621
www.alpineappliance.com
970-949-1199
Service email: service@alpineappliance.com
IMPORTANT PLANNING INFORMATION:
• You must cross reference this spec book with your quote to verify hinge sides, blower selections and other planning details. Contact your
salesperson immediately if you require any clarification on manufacturer specifications.
• Please provide this spec book with your quote to all related subcontractors: cabinet provider, electricians, plumbers and mechanical subcontractors.
Verify that your final appliances selection are planned in your final cabinet package.
• It is the purchaser’s responsibility to review attached specs prior to installation and verify proper openings and location of live utilities. Always run 4
wires to any 208/240V appliances.
• Flooring, cabinets, countertops, sinks, plumbing, electrical and mechanical must be complete, live and to manufacturer specifications prior to
installation. Do not schedule appliance installation unless you are confident that all areas will be complete with live utilities.
• Installation does not include hood installation or application of custom wood panels unless specifically indicated as a line item on your order. If you
wish to include wood panel installation or hood installation please discuss with your salesperson prior to acceptance of your quote.
• Installation is quoted as full installation of all appliances at one time. Installing appliances in multiple trips or scheduling installation when not ready
may result in additional charges if not planned and quoted in advance.
• Clear and safe access to installation locations is the purchaser’s responsibility. Please verify that appliances can safely clear all doorways, stairways,
landings/turns, ceilings, and other obstacles (indoor or outdoor) prior to acceptance of you quote. Any cost or scheduling of a crane is the
responsibility of the purchaser to coordinate.
TERMS AND AGREEMENTS:
• All product limited warranties are provided and administered by the manufacturer and not the dealer. Certain manufacturers will require you to
contact them directly when in front of your unit before dispatching a service technician. You agree that if you have a functional problem you will
contact the product manufacturer to report your problem and request service. Warranty repairs and product exchanges due to functional issues can
only be authorized by the manufacturer.
• Alpine Appliance Center (AAC) provides the model number and manufacturer specifications prior to purchase and we disclaim any implied warranties
as to the performance or intended use of your appliance. All product warranties and specifications can be found online at the manufacturer website
and warranty information is provided in hard copy at time of installation. Manufacturer specifications are subject to change and the accuracy of
manufacturer specification are the responsibility of the manufacturer.
• Sales orders for existing credit account customers require a 60% deposit upon quote approval and the remaining balance will be due upon delivery of
all appliances. Customers without a credit account must pay in full at time of order.
• Orders will be stored at Alpine warehouses for a 30 day grace period beyond the provided estimated delivery date after which orders must be
scheduled for delivery and the remaining balance must be paid in full. If your project is experiencing delays please contact your sale rep as soon as
possible.
• Once an order is confirmed it may not be possible to make future changes if product has shipped. We recommend that you place orders no more
than 4 months in advance of your anticipated delivery date.
• Please schedule all installations at least 1-2 weeks in advance and refer to the important planning information above to ensure your job site is
prepared. Cancellations of scheduled installations must be communicated at least 48 hours in advance (excluding weekends).
• All required cabinetry, countertops, mechanical and utilities must be complete/live and match provided manufacturer specifications. Customers must
provide safe and clear access on the scheduled installation date.
• Safe and clear access will be determined by Alpine Appliance installers. If the installers determine a crane is necessary for install, the scheduling and
associated cost will be responsibility of customer or contractor. If job site conditions are creating unsafe conditions AAC reserves the right to re-
schedule for a future date.
• All custom orders, hoods, duct covers, or ventilation accessories are non-returnable and non-refundable. All other return requests must be approved
by management. Approved returns may have up to a 30% re-stocking fee applied. All returns must be unused and in the original factory box and be
free from any damage. Returns may be denied due to vendor restrictions, if not requested within 10 days of delivery, or due to other factors.
• Alpine Appliance is not responsible for damage to appliances caused by others after installation and inspection or delivered to site at customer or
contractor request. Cosmetic damage/defects to any appliance or personal property must be reported to Alpine within 48 hours of install by
customer or customer representative.
• Ventilation and custom wood panel installation is not included in our standard installation unless specifically noted on your order.
• In the event that existing water shut-offs fail to operate properly (do not function and move freely, seize or begin to leak when operated): it is the
purchaser’s responsibility to: 1. Contact a plumber to repair or replace defective water shutoffs 2. Accept responsibility for any damage caused due
to the failure of an existing water shutoff valve or plumbing fixture.
Model#: GDE25ESKSS
GE® ENERGY STAR® 24.8 Cu. Ft.
Bottom-Freezer Drawer Refrigerator
Approx Dimensions (HxDxW):
69 7/8 in X 37 1/2 in X 32 3/4 in
•33" width - A compact design fits in smaller spaces,
yet still offers the large storage capacity of a
French-door refrigerator
•LED lighting - Find exactly what you’ve been
looking for under crisp, clear lighting
•Sliding snack drawer - Make more space, exactly
where you need it, with a drawer that moves across
the entire width of the fresh-food section
•Factory-installed icemaker - Refrigerator comes
ready to automatically create ice
•Advanced water filtration uses MWF or XWF
replacement filter - Reduces trace pharmaceuticals
from water and ice* (* Removes 98% of ibuprofen,
atenolol, fluoxetine, progesterone and trimethoprim.
These pharmaceuticals are not necessarily in all
users’ water)
•1 clear snack drawer and 2 humidity-controlled
drawers -
•Turbo Cool setting - Drops interior temperature to
maintain freshness after frequent openings
Warranty Information:
•Parts Warranty : Limited 1-year entire appliance
•Labor Warranty : Limited 1-year entire appliance
•Warranty Notes : See written warranty for full
details
Also Available in:
GDE25EGKWW - White
GDE25EGKBB - Black
Brochure prepared exclusively for on Aug 30, 2019.Date Created: 08/30/19
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
GDE25ESK
GE Appliances ENERGY STAR® 24.9 Cu. Ft. Bottom-Freezer Refrigerator
Specification Revised 4/16
For answers to your Monogram, GE Café™ Series, GE Profile™ Series or
GE Appliances product questions, visit our website at geappliances.com
or call GE Answer Center® Service, 800.626.2000.
Listed by
Underwriters
Laboratories
As an ENERGY STAR®
partner, GE has determined
that this product meets the
ENERGY STAR guidelines
for energy efficiency.
Height to top of door (in.) A
Height to top of hinge (in.) B
Height to top of case (in.) C
Case depth without door (in.) D
Case depth less door handle (in.) E
Case depth with door handle (in.) F
Depth with fresh food door open 90˚ (in.) G
Width (in.) H
Width with door open 90˚ inc. door handle (in.) I
AI
R
CL
E
A
R
A
N
C
E
S
OV
E
R
A
L
L
DI
M
E
N
S
I
O
N
S
69-7/8
69-3/4
68-5/8
30-5/8
35
37-1/2
65-1/8
32-3/4
36-7/8
Each side (in.)
Top (in.)
Back (in.)
1/8
1
2
FRONT VIEW TOP VIEW
H
FD
G
E
I
BA C
Height to top of door (in.) A
Height to top of hinge (in.) B
Height to top of case (in.) C
Case depth without door (in.) D
Case depth less door handle (in.) E
Case depth with door handle (in.) F
Depth with fresh food door open 90˚ (in.) G
Width (in.) H
Width with door open 90˚ inc. door handle (in.) I
AI
R
CL
E
A
R
A
N
C
E
S
OV
E
R
A
L
L
DI
M
E
N
S
I
O
N
S
69-7/8
69-3/4
68-5/8
30-5/8
35
37-1/2
65-1/8
32-3/4
36-7/8
Each side (in.)
Top (in.)
Back (in.)
1/8
1
2
FRONT VIEW TOP VIEWH FD GEIBAC
FRONT VIEW TOP VIEW
24" DISHWASHER—INTEGRATED HANDLE
30 SERIES DBI663IS
PROGRAMS
• Normal Wash
• Eco Wash
• Sanitation Wash
• Time Program
• Plastic Wash
• Hygiene Wash
• Crystal Glass
• Lower Half Wash
• Upper Half Wash
• Self-Cleaning
• Rinse and Hold
FEATURES
Premium height-adjustable upper rack and premium lower rack
Top tray with Instant Lift™
Heavy-duty stainless steel construction
Nylon-coated steel racks
Condensation drying system
16 place-setting capacity
Quiet operation—44 dB(A)
8Spray™ wash system
Hidden controls
LED display
Delayed start
ADA height compliant
DIMENSIONS
24" DISHWASHER—INTEGRATED HANDLE
PRODUCT SPECIFICATIONS
Model DBI663IS
Width 23 7/8"
Height 32 3/4"**—34 3/4"
Depth 22"
Door Clearance 24 5/8"
Weight 115 lb
Electrical Supply 115 VAC, 60 Hz
Service 15 amp dedicated circuit
Receptacle 3-prong grounding-type
Power Cord 4'
Water Connection 6' PEX tubing with
3/8" NPT female connection
Drain Connection 5' corrugated tubing
Pressure 4.2–140 psi
Electrical supply, plumbing supply, and drain should be
located in an adjacent cabinet. If not, they must be located
within the shaded area shown in the illustrations below.
5 3/8"
(137)
OPENING
WIDTH
AREA EXTENDS 2" (51)
FORWARD ON FLOOR
53/8"
(137)
OPENING
WIDTH
AREA EXTENDS 2" (51)
FORWARD ON FLOOR
ELECTRICAL | PLUMBING
OPEN DOOR
237/8" (606)
H
4" (102)*
22" (559)
2"
(51)
5 3/8"*
(137)
*Dimension will vary with product height.
24 5/8"
(625)
32 3/4" (832)**
TO
343/4" (883)
**Can be reduced to 321/4" (819).
INSTALLATION
W
OPENING WIDTH
341/2"
(876)
OPENING
HEIGHT
24" (610)
OPENING
DEPTH
TOP VIEW
SIDE VIEW FRONT VIEW
NOTE: 31/2" (89) finished returns will be visible and should be finished to match cabinetry.
31/2" (89)
FINISHED
RETURN
FRAMELESS CABINETRY
3/4"
(19)
TYPICAL 31/2" (89)
FINISHED
RETURN
FILLER
FRAMED CABINETRY
W W
24" (610)
W
OPENING WIDTH
341/2"
(876)
OPENING
HEIGHT
24" (610)
OPENING
DEPTH
TOP VIEW
SIDE VIEW FRONT VIEW
NOTE: 31/2" (89) finished returns will be visible and should be finished to match cabinetry.
31/2" (89)
FINISHED
RETURN
FRAMELESS CABINETRY
3/4"
(19)
TYPICAL
3 1/2" (89)
FINISHED
RETURN
FILLER
FRAMED CABINETRY
W W
W
OPENING WIDTH
34 1/2"
(876)
OPENING
HEIGHT
24" (610)
OPENING
DEPTH
TOP VIEW
SIDE VIEW FRONT VIEW
NOTE: 31/2" (89) finished returns will be visible and should be finished to match cabinetry.
3 1/2" (89)
FINISHED
RETURN
FRAMELESS CABINETRY
3/4"
(19)
TYPICAL
31/2" (89)
FINISHED
RETURN
FILLER
FRAMED CABINETRY
W W
24"
(610)
24"
(610)
Model#: JES2051SNSS
GE® 2.0 Cu. Ft. Capacity Countertop
Microwave Oven
Approx Dimensions (HxDxW):
13 5/8 in X 19 1/4 in X 24 1/8 in
•2.0 cu. ft. capacity - 1200 Watts (IEC-705 test
procedure)
•Sensor cooking controls - Automatically adjusts
time and power for delicious cooking results
•Auto and time defrost - Defrosting times and power
levels are programmed automatically or manually for
optimal results
•Extra-large 16" turntable - Rotates food throughout
the cycle and accommodates large cookware
•Instant On controls - One-touch instant operation
•Control lockout - Helps prevent accidental
activation
•Timer on/off - Minute timer helps keep you on track
Warranty Information:
•Parts Warranty : Limited 1-year entire appliance
•Labor Warranty : Limited 1-year entire appliance
•Warranty Notes : See written warranty for full
details
Also Available in:
JES2051DNBB - Black
JES2051DNWW - White
Date Created: 10/10/19
JES2051DN/SN
GE® Series 2.0 Cu. Ft. Countertop Microwave Oven
DimENSioNS aND iNStallatioN iNformatioN (iN iNchES)
Specification Revised 8/15
For answers to your Monogram,® GE Profile™
or GE® appliance questions, visit our website
at geappliances.com or call GE Answer Center®
service, 800.626.2000.
This uniT designed To be placed on counTerTop.
exTerior dimensions* (in inches)
W x H x D 23-7/8 x 13-5/8 x 19-1/4
*Height includes feet. Depth does not include handle.
Listed by
Underwriters
Laboratories
JES2051DNWW_BB
Sensor Cooking
Popcorn Beverage
TimeCook TimerOn/Off
Reminder
AM/PM
Potato
PowerLevel
Clock
Add30 Sec.
Vegetable
Express Cook
1
4
2
5
3
6
78
0
9
StartPAUSE
Display
Scroll Speed
DefrostAuto/Time
CLEAROFF
DelayStart
Help BeeperVolume
Reheat
Chicken/Fish
18:60