HomeMy WebLinkAboutFile Documents.1448 Crystal Lake Rd.0214.2018.ARBK
ELEMENT ENVIRONMENTAL | MM8 071118 Crystal
1
Client Job Name
Crystal Lake
Property Address
1449 Crystal Lake Rd.
Aspen, CO 81611
TABLE OF CONTENTS
1.0 - Scope of Work
2.0 - Sampling Requirements
3.0 - Sampling Methodology
4.0 - Laboratory
5.0 - Suspect Materials Sampled
6.0 - Table of Results
7.0 - Description of Sampling Area
8.0 - Conclusion
- Lab Report
- Certifications
Asbestos Samples Analyzed: 5
Positive Asbestos Samples: 0
_____________________________________________
Asbestos Sampling Report
Date: 07/12/2018
Date of Inspection: 07/11/2018
Client:
MM-Eight
Attn:
Trevor Everett
Building Inspector:
Ellen Johnson
CDPHE #23799
Joshua Johnson
CDPHE #18401
189 County Rd. 135
Glenwood Springs, CO 81601
josh@elementenv.co
(970)274-3139
08/01/2018
ELEMENT ENVIRONMENTAL | MM8 071118 Crystal
2
1.0- This was an inspection for suspect ACM (Asbestos Containing Material) for a remodel.
Element Environmental conducted a visible inspection for visible materials that would
be impacted during the remodel. This inspection was limited to the areas found in the
Description of the Sampling Area 7.0. Although sampling is destructive in nature, this
was a non-invasive inspection. It was of materials that were accessible. If other suspect
materials become visible/apparent during demolition or construction activities, work in
that area should be halted and more sampling/testing must take place, per Colorado
regulations. Any suspect materials that were not tested are to be assumed to contain
asbestos.
2.0- A limited bulk sampling of from all suspect materials was conducted in accordance with
Colorado State Requirements. The minimum number of samples per homogenous areas
are as follows:
2.1- Surfacing Materials- <1,000 sq.ft.- Minimum of 3 samples
1,000 sq.ft.- 5,000sq.ft.- Minimum of 5 samples
>5,000 sq.ft. Minimum of 7 samples
2.2- Miscellaneous materials- Minimum of 2 samples
2.3- Thermal Systems Insulation (TSI)- Minimum of 3 samples
3.0- The purpose of the inspection is to identify materials that are homogenous. A
homogeneous area is defined as one which shares suspect material, texture, color,
location, and/or apparent time of construction. The materials are segregated into
separate homogenous areas. The size is determined and then samples are taken. The
materials are touched to determine friability. Friable ACM is material that can be
crushed or reduced to powder by hand pressure. The samples are taken in a random
numerical sequence.
4.0- Ellen Johnson, a Colorado Department of Public Health & Environment certified building
inspector, certification number: 23799, performed the inspection. The findings were
reviewed by Josh Johnson, a Colorado Department of Public Health & Environment
certified building inspector, certification number: 18401. Samples taken were sent to
CEI Labs in Cary, North Carolina. The samples were analyzed by PLM (Polarized Light
Microscopy) analysis. Per the CDPHE Regulation any sample that is found by a lab to be
trace, or <1% asbestos, is considered to be ACM material. This material would still be a
regulated material by CDPHE. The sample must have an additional “point count”
performed to be considered less than 1% and not be regulated by the CDPHE. T he lab’s
documents with analyses and findings are found below.
08/01/2018
ELEMENT ENVIRONMENTAL | MM8 071118 Crystal
3
5.0- SUSPECT MATERIALS SAMPLES
• Joint Compound
• Texture
• Tape
• Drywall
6.0- TABLE OF RESULTS
HOMOGENOUS
AREA
DESCRIPTION OF
AREA
ACM
CATEGORY
NUMBER OF
SAMPLES
APPROXIMATE
SQ.FT.*
ACM ASSESSMENT
CATEGORIES
% AND TYPE OF
ASBESTOS FOUND
(A) Waxed Plaster
Texture
Surfacing 5 ~3000 sq.ft. N/A No Asbestos Detected
Key:
ACM Assessment Categories:
1- Damaged or significantly damaged Thermal Systems Insulation
(TSI) ACM
2- Damaged friable surfacing ACM
3- Significantly damaged friable Surfacing ACM
4- Damaged or significantly damaged friable Miscellaneous ACM
5- ACM with potential for damage
6- ACM with potential for significant damage
7- Friable ACM with low potential for damage
Other- ACM not classified in the above Assessment Categories
N/A- Not Applicable
* Square footage is estimated and not for bidding purposes
7.0- DESCRIPTION OF SAMPLING AREA
• The Waxed Plaster Texture in the downstairs Media Room area.
8.0- CONCLUSION
No asbestos was detected in any of the samples.
Please feel free to contact us with any questions with our information below.
Sincerely,
Ellen Johnson
08/01/2018
ELEMENT ENVIRONMENTAL | MM8 071118 Crystal
4
08/01/2018
ELEMENT ENVIRONMENTAL | MM8 071118 Crystal
5
08/01/2018
ELEMENT ENVIRONMENTAL | MM8 071118 Crystal
6
08/01/2018
ELEMENT ENVIRONMENTAL | MM8 071118 Crystal
7
08/01/2018