HomeMy WebLinkAboutFile Documents.546 McSkimming Rd.0047-2020-BCHO (13)The S-5-S clamp was
created specifically for
popular snap-together
profiles.
®
®
®
Th
e
ri
g
h
t
w
a
y
t
o
a
t
t
a
c
h
a
l
m
o
s
t
a
n
y
t
h
i
n
g
t
o
m
e
t
a
l
r
o
o
f
s
!
S-
5
-
S
a
n
d
S
-
5
-
S
M
i
n
i
88
8
-
8
2
5
-
3
4
3
2
|
w
w
w
.
S
-
5
.
c
o
m
S-5-S Clamp
The S-5-S clamp was created specifically
for popular snap-together profiles—
including residential profiles by Taylor
Metals and Easy Lock Standing Seam.
For horizontal seams under .540 inches
(like the Firestone UC4) the S-5-S or
S-5-S Mini can be used to avoid the
necessity of crimping the seam.
Its simple design and size make it
perfect for use with S-5!® snow retention
products and other heavy-duty
applications. Installation is as simple
as setting the patented round-point
setscrews into the clamp, placing the
clamp on the seam, and tightening
them to the specified tension. Then, affix
ancillary items using the bolt provided
with the product. Go to
www.S-5.com/tools for information and
tools available for properly attaching
and tensioning S-5! clamps.
S-5-S Mini Clamp
The S-5-S Mini is a bit shorter than the
S-5-S and has one setscrew rather than
two. The mini is the choice for attaching
all kinds of rooftop accessories: signs,
walkways, satellite dishes, antennas,
rooftop lighting, lightning protection
systems, solar arrays, exhaust stack
bracing, conduit, condensate lines,
mechanical equipment—just about
anything!*
*S-5! mini clamps are not compatible with, and should not
be used with S-5! SnoRail™/SnoFence™ or ColorGard® snow
retention systems.
Please note: All measurements are rounded to the second decimal place.
Distributed byS-5!® Warning! Please use this product responsibly!
Products are protected by multiple U.S. and foreign patents. Visit the website at www.S-5.com for
complete information on patents and trademarks. For maximum holding strength, setscrews should
be tensioned and re-tensioned as the seam material compresses. Clamp setscrew tension should be
verified using a calibrated torque wrench between 160 and 180 inch pounds when used on 22ga steel,
and between 130 and 150 inch pounds for all other metals and thinner gauges of steel. Consult the S-5!
website at www.S-5.com for published data regarding holding strength.
Copyright 2013, Metal Roof Innovations, Ltd. S-5! products are patent protected.
S-5! aggressively protects its patents, trademarks and copyrights. Version 111813.
The strength of the S-5-S clamp is in its simple design. The patented
setscrews will slightly dimple the metal seam material but not pierce it—
leaving roof warranties intact.
S-5-S Mini Clamp
S-5-S Clamp
2.00"
(51.00 mm)
0.50"
(12.70 mm)
0.50"
(12.70 mm)
1.50"
(38.00 mm)
Two M10-1.5
Threaded Holes
1.50"
(38.00 mm)
0.55"
(14.00 mm)
M10-1.5 X 16.00 mm
Hex Flange Bolt
0.91"
(23.00 mm)
1.18"
(30.00 mm)
1.50"
(38.00 mm)
One M8-1.25
Threaded Hole
Centered On Part
1.50"
(38.00 mm)
0.55"
(14.00 mm)
M8-1.25 X 16.00 mm
Hex Flange Bolt
0.91"
(23.00 mm)
One 3/8-24 X 0.80"
Round Point Setscrews
Two 3/8-24 X 0.80"
Round Point Setscrews
Example Profiles
®
The S-5-S and S-5-S Mini clamps are each furnished with
the hardware shown to the right. Each box also includes
a bit tip for tightening setscrews using an electric screw
gun. A structural aluminum attachment clamp, the S-5-S
is compatible with most common metal roofing materials
excluding copper. All included hardware is stainless
steel. Please visit www.S-5.com for more information
including CAD details, metallurgical compatibilities and
specifications.
The S-5-S clamp has been tested for load-to-failure
results on most major brands and profiles of standing
seam roofing. The independent lab test data found at
www.S-5.com can be used for load-critical designs and
applications. S-5!® holding strength is unmatched in the
industry. Profiles that are shaped as illustrated below will
work with the S-5-S and S-5-S Mini. In order for the S-5-S
or S-5-S Mini to fit these types of seams, the finished seam
must:
• Be at least 1.00” high.
• Have a height distance less than or equal to 0.25”
between the male portion of the panel and female
portion of the panel.