HomeMy WebLinkAboutFile Documents.725 Cemetery Ln.0045-2019-BRES (27) Residential Design Standards ,: ;
Administrative Compliance Review Staff Checklist - Single Family and Duplex ,IT.OrS(.E,
Address:727 Cemetery Ln
Parcel ID:273512291001
R15 Digitally signed by
-
Zone District/PD: Approved: Garrett Larimer
Claude Salter Approved: Garrett Larimer DN:CN=Garrett Larimer
Representative: Date:
(Approved plans/elevations attached) 16:28 25-06 00'2019.09.03
Email:aspendevelopmentservices@gmail.com
Phone:
Disclaimer: This application is only valid for the attached design.If any element of the design subject to Residential Design Standards changes prior to or during building permit review, the
applicant shall be required to apply for a new Administrative Compliance Review.
Standard Complies Alternative Does N/A Sheet#(s)/Notes
6. Compliance Comply
B.1.Articulation of Building Mass
r The subject property is outside the infill area.
(Non-flexible)
B.2.Building Orientation(Flexible) V
r The front facade is parallel to the Access easement to the north of the
property, satisfying the strong orientation requirement. 725 Cemetery Ln is
between Cemetery Ln and this unit, only one street facing facade exists.
B.3.Build-to Requirement v Front setback requirement is 25'.
(Flexible)
B.4.One StoryElement Option 3: One story step down. One story step down measures more than
(Flexible) V 20% of the overall width of the unit and has no living space above, and the
plate height measures less than one story.
C.1.Garage Access(Non flexible) V Garage access from access easement to north of property. see sheet
A-001 .
C.2.Garage Placementr I/ Garage is side loaded. see sheet A-001 .
(Non-flexible)
C.3.Garage Dimensions Garage measures less than 24' and living area measures more tED
(Flexible) V greater than the width of the garage. see sheet A-001.
10/17/2019
h:, 1 ,t 2ASPEN
BUILDING DEPARTMENT
p"lel"sbnes b,
Os.Ismer
°'rretWiner u r.ret` Residential Design Standards 07iliAdministrative Compliance Review Staff Checklist THE CITY OFASPEN
Disclaimer: This application is only valid for the attached design.If any element of the design subject to Residential Design Standards changes prior to or during building permit review, the
applicant shall be required to apply for a new Administrative Compliance Review.
Complianrillillir Sheet#(s)/Notes 1111111.1.
C.4.Garage Door Design(Flexible) 1/ [ Two separate garage doors used. see sheet A-001 .
I r
D.1.E Connectiontry Street facing garage door used. see sheet A-001 .
(Non-fleon-flexible) V
D.2.Door Height 1 Front door shown at 8'. see sheet A-201 .
(Flexible) 6/
D.3.EntryPorch
(Flexible)
Entry porch shown at less than one story. see sheet A-201 .
V
E.1.Prin Window The street facing window to the east of the front door in the one story
(Flexible) V element satisfies the requirements of this section. see sheet A-201 .
E.2.WindowPlacement All windows measure less than one story and do not span more than 1
(Flexiblexible)) V story. see sheet A-202.
E.3.Nonorthogonal Window Limit ✓ No non orthogonal windows proposed. see sheet A-202.
(Flexible)
E.4.Lightwell/Stairwell Location ✓ No window or stair wells proposed between the front most facade and
(Flexible) + a street on either street facing facade. see sheet A-001 .
Materials are used consistently and true to their character
E.5.Materials
ials ✓ I [ k , IVE D
(Flexible) tics
sheet A 201 and A 202.
10/17/2019
I'aI<<• 2 r,t 2
ASPEN
BUILDING DEPARTMENT