Loading...
HomeMy WebLinkAboutFile Documents.1315 Sage Ct.0082-2021-BRES (32) a The •-st designs deserve ghmidi 41111rbest design partners. To: MATT JOHNSON Phone: ###.###.#### Attn: N/A CC: TIM ANDRULAITIS RE: SAGE COURT ADDITION Date: 2021.05.03 Matt, Attached please find our PERMIT lighting plans and specifications. Thank you, Elise Streeb Contractor to provide submittals prior to order for all fixtures included in this package. All items, including but not limited to: • finish • color temperature • driver type • beam spread • mounting hardware • lamp type • accessories • voltage • dimming type/ compatibility • wattage • length / size • collar depth • housing type RECEIVED BASALT OFFICE 6 AQ 4 Oa 21 20 SUNSET DRIVE UNIT 9, BASALT,CO 81621 WWW.LS.LIGHTING 2727 W.2ND AVE. DENVER,CO 80219 970.343.2303 7299 8 12 BUILDING DEPARTMENT C ` (0111Cideigl GENERAL NOTES • All fixture wiring shall be of the heat resistant type, or as required by local code. • Manufacturers and contractor shall be responsible for proper ventilation and temperature conditions of light fixtures. • All fixtures with removable covers or cones shall be supplied with safety chains or wiring securely attached to main housings. There shall be a sufficient quantity of safety supports to hold total weight of fixture. • The contractor shall verify with the architect and/or engineer that all lighting equipment meets all national and local codes as applicable, e.g. thermal protection and UL label. • Budget pricing has been secured for all products specified and is used in the preparation of preliminary opinions of probable costs. A record of specific unit costs has been shared confidentially with the owner to assist in the analysis of bid submittals. • Contractor shall submit to the lighting consultant, for written approval, manufacturer's catalogue specification sheets for all light fixtures prior to purchase of the same. Manufacturer must provide shop drawings for all custom fixtures. All accessories, parts, lamps, transformers etc. shall be provided in submittals. All mounting hardware not listed in the spec to be provided by contractor. • Contractor shall submit for approval of the lighting consultant detailed drawings of all special design fixtures prior to fabrication of it. • Contractor shall provide a complete list of all lamps that will be furnished on the project. • Voluntary product substitutions from the contractor will not be considered without prior written approval to submit from the lighting designer. LS reserves the right to bill additional services for reviewing alternate fixture submittals. • If contractor elects to submit substitutions, all products in a group, with similar function and appearance, such as recessed and adjustable downlights, fluorescent troffers, exit signs, lamps, or etc., must be supplied from the same manufacturer. If a family of fixtures is submitted from more than one manufacturer, contractor will be asked to resubmit package based on single manufacturer. • If contractor elects to provide substitutions for LED lamps (with approval from lighting consultant), contractor shall provide documentation from lamp manufacturer, power supply (ballast/driver/transformer/etc.) manufacturer, and lighting control manufacturer that all lamp-power supply-lighting control combinations provided on the project have been tested for compatibility and approved by all manufacturers concerned. This documentation must be provided at time of package submittal, or package will be sent back for resubmittal. • All component parts of architectural lighting installations (i.e., mounting components, grid accessories, track accessories) shall be provided by general contractor. • Color and finish specification shall be by the architect/ interior designer unless otherwise designated in this specification. • Contractor shall verify ceiling construction for each fixture type and location and shall coordinate trim details. • By approving and submitting shop drawings, product data, samples and similar submittals, the contractor represents that the contractor has verified materials, field measurements and field construction criteria, and has checked and coordinated the information contained within such submittals against the requirements of the work and contract documents. • Unless otherwise specified, voltages of all luminaires shall be verified by the electrical engineer. • Luminaires used any time during construction as work lights must be relamped by the contractor, with the project-specified lamp, just prior to turnover of area to owner. Contractor responsible for protection of luminaire components during construction. If luminaires are damaged due to any of the following, but not limited to, paint, debris, construction vibrations, it is the contractor's sole responsibility to replace damaged components. • Contractor to ensure that transformer/driver/power supply locations comply with national and local electrical codes. Contractor to review locations of transformers with design team prior to installation to avoid conflict with interiors/architecture. • Transformers should be loaded by no more than 90% of its rating. • In IC conditions, all housing requirements to be coordinated by Contractor with reference to R-values and insulation conditions. Manufacturer information provided on cutsheets. If information is not provided, the Contractor is to review building conditions prior to purchasing fixtures. If specification / manufacturer spec does not meet local requirements, alternate specifications can be submitted for review. f"� • Dimming type (DIM TYPE) outlined for lighting control intent. Contract to refer to exact dimm � '`' .� specifications by manufacturer for wiring and driver details. 06/04/2021 SAGE COURT ADDITION PAGE 2 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES Al TECH LIGHTING Housing: E3R-*-L0-930-*- Housing: Recessed adjustable LED downlight,12W,13191m, Verify all TBD A-I-* 90+CRI,3000K,beam spread TBD, IC rated airtight housing, options.Trim Trim: E3R-*-*-O-* dimming TBD,120V. to be Trim:Trim style TBD,finish TBD. coordinated with ceiling thickness. 1L TECH LIGHTING' ELEMENTTM 3" LED 441111111101., ADJUSTABLE DOWNLIGHT The ELEMENT 3"Next Generation Adjustable recessed downlight features full adjustability with lockable, tool-free,hot aiming.ELEMENT's patented high/low lamp positioning allows the LED to be positioned closer to the aperture for maximum light output and efficiency or higher in the ceiling to minimize glare and flash SHOWN IN FLANGELESS BEVEL SQUARE on the trim.Options include premium Warm Dimming,Tunable White,Xicato and Xicato Artist Series LED modules.Trim options include Flanged or Flangeless and Flangeless in Wood Ceiling. LUMEN MULTIPLIER(CRI/CCT) 80 CRI 90 CRI • Housing reduced by 60% • Standard phase dimming down to 1% CCT MULTIPLIER MULTIPLIE • Tool-free aiming/locking:0-40°tilt,361°rotation • Trims reflector options 2700K 0.95 0.80 3000K 1.00 0.85 • Patented high/low lamp positioning • Solite Soft Focus lens option 3500K 1.05 0.90 • 2-step standard Lumen output will vary by CCT and CRI. See photometric charts for output information. SPECIFICATIONS STATIC WHITE TUNABLE WHITE HIGH LOW HIGH OUTPUT HIGH OUTPUT OUTPUT OUTPUT (5000K) (4000K) DELIVERED LUMENS 1800/1450 1319/1124 1129 945 1300 900 1272 1150 WATTS 17 12 15 15 17 12 18 18 EFFICACY 106/85 110/94 75 63 76 75 72 64 CRI 80+/90+ 80+ 95+ 90+ 90+ 10°-19,414 118°-5,848 CBCP 25°-5,416 140°-3,230 21°-3,184 143°-2,733 I60°-1,014 18°-N/A 125°-N/A 140°-1,622 160°-N/A 60°-2,305 CCT OPTIONS 2700K,3000K or 3500K 2700K,3000K or 3500K' 3000K-1800K 5000K-2700K 4000K-1800K COLOR CONSISTENCY 2-step 1 X 2-step 3-step 2-step VOLTAGE 120V or 277V Standard phase dimming(down to 1%)I 0-10V(down to 5%) eldoLED 0-10V or Dali DIMMING' Lutron Hi-lume EcoSystem(down to 01%) (down to 0.1%) Lutron Hi-lume 2-Wire(down to 1%)I eldoLED 0-10y or Dali(down to 0.1%) POWER SUPPLY Constant current driver with+,9 power factor and+80%efficiency • OPTICS Field changeable. Field changeable: Field changeable: 10°,18°,25°.40°,60°TIR 21°,43°,60°Reflector 18°,25°,40°,60°TIR ADJUSTABILITY Lockable,hot-aiming 0-40°tilt,361°rotation,high/low lamp positioning,45°collar rotation CEILING APPEARANCE Flanged,Flangeless or Flangeless in Wood Ceiling Flanged.Up to 2-1/2" Flangeless:No ceiling thickness limitations CEILING THICKNESS Flangeless in Wood Ceiling',1/2"to 2" Note'.Thicker ceilings impact light cutoff CEILING APERTURE 3-7/8"ceiling cutout HOUSING IC Airtight,Non-IC Airtight,Chicago Plenum.IC suitable up to R60 spray foam insulation. Sauna/Steam-room use available only with combination of H Shower trim.LO Low Output housing,and I IC housing rating. • CONSTRUCTION Housing:Heavy-Gauge,Cold-Rolled Steel Trim:Die-Cast Aluminum FINISH Housing,Black Powder Coat Trim:Antique Bronze,Black,Satin Nickel,White(paintable) GENERAL LISTING ETL listed.Damp listed.Shower version Wet listed. CALIFORNIA TITLE 24 Registered CEC Appliance Database.Can be used to comply with CEC 2019 Title 24 part 6(JA8-2016,JA8-2019)(for 90 CRI versions). L70 50,000 hours min WARRANTY' 5 years Data in chart reflect 3000K/oo CRI values unless noted. Custom Output/Custom RAL/Custom CCT available,Contact Quotes Department Ordering grids available on page 2. Accepts two optical controls and an optional trim-mounted lens. [See ELEMENT-Lighting.com for dimmer compatibility. 2wsit ELEMENT-lighting.corn for specific warranty Imitations and details. 33500K Xicato module not available for Artist series. ©2020 Tech Lighting,L.L.C.All rights reserved.The Tech Lighting logo Is a registered trademark of Tech Lighting. I',FE ecnreserveserocaneseccaonsorroucmrovemenswounocaon. UPDATED 12�� O-. 06/04/2021 SAGE COURT ADDITION PAGE 3 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES Al TECH LIGHTING Housing: E3R-*-L0-930-*- Housing: Recessed adjustable LED downlight,12W,13191m, Verify all TBD A-I-* 90+CRI,3000K,beam spread TBD, IC rated airtight housing, options.Trim Trim: E3R-*-*-O-* dimming TBD,120V. to be Trim:Trim style TBD,finish TBD. coordinated with ceiling thickness. 1L TECH LIGHTING' ELEMENTTM 3" LED ADJUSTABLE DOWNLIGHT ORDERING GRIDS HOUSING CEILING BEAM HOUSING PRODUCT APPEARANCE OUTPUT CRI/CCT SPREAD FUNCTION RATING DRIVER VOLTAGE E3R ELEMENT 3" LF FLANGELESS -LH HIGH OUTPUT, 827 80 CRI,2700K,2-STEP 0 10°4 A ADJUSTABLE I IC AIRTIGHT STANDARD PHASE 1% 120 VOLT ROUND FF FLANGED 17W 830 80 CRI,3000K,2-STEP 1 18° N NON-IC (LEAVE BLANK) (LEAVE BLANK) E35 ELEMENT 3" WC WOOD CEILING, -LO LOW OUTPUT, 835 80 CRI.3500K.2-STEP 2 25° AIRTIGHT -010 0-10V DIMMING 5% -277 277 VOLT SQUARE 12W3 927 90 CRI,2700K,2-STEP 4 40° C CHICAGO -ELDO ELDOLED 0.1%0-10V LINEAR+' 930 90 CRI,3000K,2-STEP 6 60° PLENUM -ELDOA ELDOLED 0.1%0-10V 935 90 CRI,3500K,2-STEP E EMERGENCY LOGARITHMIC. WD 90 CRI,3000-1800K, BATTERY -ELD1 ELDOLED I%0-10V LINEAR. WARM DIM.3-STEP (NON-IC/ -ELD1A ELDOLED 1%0-10V 1W52 90 CRI,5000K-2700K, CHICAGO LOGARITHMIC. TUNABLE WHITE,2-STEP. PLENUM) -ELDD ELDOLED 0.1%DALIs TW41 90 CRI,4000K-1800K, -ELTD ELDOLED TUNABLE WHITE TUNABLE WHITE,2-STEP3 0.1%0-10V LINEAR... -ELTD ELDOLED TUNABLE WHITE -X XICATO, 127 80 CRI,2700K, 21 21°XICATO 0.1%DALI.•s HIGH OUTPUT, 1X2-STEP,XICATO 43 43°XICATO -HL2W LUTRON HI-LUME 1%2-WIRE',. 14W 130 80 CRI.3000K, 60 60°XICATO -HLECO LUTRON HI-LUME 0.1% 1X2-STEP,XICATO ECOSYSTEM 135 80 CRI,3500K, 1X2-STEP,XICATO A27 95 CRI,2700K,1X2-STEP, XICATO ARTIST A30 95 CRI,3000K,1X2-STEP, XICATO ARTIST A Trims are required and must be ordered separately. For dimming details,refer to Dimmer Compatibility Chart. 1WE-Wood Ceiling option accommodates Flangeless trims only. 2L0-Sauna/Steam-room use available only with combination of H Shower trim.LO Low Output housing,and I IC housing rating. ZTW52/TW41/ELTO/ELTD-Tunable White only available in High Output,only available with ELTD(0-10V,linear),or ELTD(Deli).For 0-10V logarithmic dimming consult Quotes Department. 40-10°optic has a unique LED module not available with Warm Dim or Tunable White.Changing optics to 18°,25°,40°or 60°,will require a new LED module. sLutron Hi-lume and eldoLED drivers not compatible with Round Flangeless(E3RLF)or Round Wood Ceiling(E3RWC)housings. .HL2W-Lutron Hi-lume 2-wire phase dimming(down to 1%),120V only TRIM CEILING PRODUCT APPEARANCE STYLE APERTURE FINISH E3R ELEMENT 3''ROUND L FLANGELESS B BEVEL -0 NO LENS Z ANTIQUE BRONZE E35 ELEMENT 3''SQUARE F FLANGED UP TO I"CEILING THICKNESS F FLAT -H SHOWER, B BLACK F15 FLANGED 1.1"-1.5"CEILING THICKNESS -L LENSED S SATIN NICKEL F20 FLANGED 1.6"-2.0"CEILING THICKNESS W WHITE F25 FLANGED 2.1"-2.5"CEILING THICKNESS Wood Ceiling option accommodates Flangeless trims only. 111-Sauna/Steam-room use available only with combination of H Shower trim,LO Output housing,and I IC housing rating. REPLACEMENT OPTICS REPLACEMENT REFLECTORS' BEAM BEAM PRODUCT SPREAD PRODUCT SPREAD 353E4LEDCOPT 18 18° 352LEDXREF 21 21° 25 25° 43 43° 40 40° 60 60° 60 60° 353E4LEDCOPT 352LEDXREF ,For use with Xlcato modules Only. ET�m 02020 Tech Lighting,L.L.C.All rights reserved.The Tech Lighting 1090Is a registered trademark of Tech Lighting. Tech Lighting reserves the right to change specifications for product improvements without notification. 2 06/04/2021 SAGE COURT ADDITION PAGE 4 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES Al TECH LIGHTING Housing: E3R-*-L0-930-*- Housing: Recessed adjustable LED downlight,12W,13191m, Verify all TBD A-I-* 90+CRI,3000K,beam spread TBD, IC rated airtight housing, options.Trim Trim: E3R-*-*-O-* dimming TBD,120V. to be Trim:Trim style TBD,finish TBD. coordinated with ceiling thickness. 1L TECH LIGHTING' ELEMENTTM 3" LED ADJUSTABLE DOWNLIGHT TRIMS FLANGED FLANGELESS FINISH a3• 4.3. ■ 110mm1 r109mm1 0"110 Z _- r6,mm133' •.81mm 61mm ANTIQUE LI.)V 11.71 H.]v 11.)v BRONZE 43mm 43mm 43mm 03mm ROUND BEVEL SQUARE BEVEL ROUND BEVEL SQUARE BEVEL ■ r109mm1 r109mm1 18;-1111 re1—mm1 BLACK 7.---�\ 0 ❑ 4110OO ❑ N]N IR]] WJ9 3m ■ 43mm 3mm 43mm 43mm ROUND FLAT SQUARE FLAT ROUND FLAT SQUARE FLAT SATIN NICKEL r 109mm1 r.9-1 3.2• 3_z' r61mm1 ra 1 3.2• 3.2• O �mm = u smm o �/ \ 12.1•J l2.)•1 WHITE 12_1'1 lz.]'1 53mm 69mm (PAINTABLE) 53mm 69mm ROUND WALL WASH SQUARE WALL WASH ROUND WALL WASH SQUARE WALL WASH FLANGELESS IN WOOD CEILING LENS OPTION 16imm 1 rm 1 q3 mm 43mm ROUND BEVEL(ANTIQUE BRONZE) SQUARE BEVEL(SATIN NICKEL) SHOWN WITH AND WITHOUT A LENS(SQUARE FLANGED BEVEL) 16m3.2m1 r6,m2m1 4mm a3 mm ROUND FLAT(ANTIQUE BRONZE) SQUARE FLAT(SATIN NICKEL) SHOWN WITH AND WITHOUT A LENS(ROUND FLANGELESS BEVEL) 2• r6 mml rr�91mm�1 53mm fig mm ROUND WALL WASH SQUARE WALL WASH (ANTIQUE BRONZE) (SATIN NICKEL) HOUSING 6" q• 152 mm , 162mm 664411 I\84 I 5.2' i 10.6• 2415mm '132 mm 11.5• 26 If� COLLAR HEIGHT O.)5'(19 MM) 292 mm COLLAR HEIGHT O.)5•(19 MM) 205" 125" (SEE INSTRUCTIONS FOR CEILING 521 mm (SEE INSTRUCTIONS FOR CEILING THICKNESS<0.]5") THICKNESS<0.]5") / 318 mm IC AIRTIGHT/NON-IC AIRTIGHT/CHICAGO PLENUM EMERGENCY BATTERY(NON-IC AIRTIGHT/CHICAGO PLENUM) ©2020 Tech Lighting.L.L.C.All rights reserved.The Tech Lighting logo Is a registered trademark of Tech Lighting. RECEIVED Tech Lighting reserves the right to change specifications for product improvements without notification. 3 c. 06/04/2021 SAGE COURT ADDITION PAGE 5 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES Al TECH LIGHTING Housing: E3R-*-L0-930-*- Housing: Recessed adjustable LED downlight,12W,13191m, Verify all TBD A-I-* 90+CRI,3000K,beam spread TBD, IC rated airtight housing, options.Trim Trim: E3R-*-*-O-* dimming TBD,120V. to be Trim:Trim style TBD,finish TBD. coordinated with ceiling thickness. 1L TECH LIGHTING' ELEMENTT" 3" LED ADJUSTABLE DOWNLIGHT ADJUSTABLE TRIM ADAPTER TRIM ADAPTER INSTALLED HOUSING 0 .85 _HOUSING 22 m� I COLLAR TRIM ADAPTER FLUSH II HOUSING 0 I I HOUSING _HOUS 1,5" COLLAR COLLARING 38 mm ,.625' 16 mm TRIM ADAPTER— TRIM ADAPTER EXTENDED INSTALL PRIOR TO CEILING Wood Ceiling housings("WC"designation in the ordering grid)ship with an adjustable trim adapter that inserts into the housing aperture and allows standard ELEMENT 3"Flangeless trims to achieve a truly flangeless,flush ceiling appearance in special applications such as wood or stone installation.For use in new construction.Consult installation instructions regarding plenum requirements and ceiling thickness ratios. ear ©2020 Tech Lighting,L.L.C.All rights reserved.The Tech Lighting logo is registered trademark of Tech Lighting. Tech Lighting reserves the right to change specifications for product improvements without notification. ■■!/ 4 O.. 06/04/2021 SAGE COURT ADDITION PAGE 6 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES Al TECH LIGHTING Housing: E3R-*-L0-930-*- Housing: Recessed adjustable LED downlight,12W,13191m, Verify all TBD A-I-* 90+CRI,3000K,beam spread TBD, IC rated airtight housing, options.Trim Trim: E3R-*-*-O-* dimming TBD,120V. to be Trim:Trim style TBD,finish TBD. coordinated with ceiling thickness. 1L TECH LIGHTING' ELEMENTT" 311 LED ADJUSTABLE DOWNLIGHT TRIM-MOUNTED REFLECTORS ELEMENT Specular Reflectors reduce glare while creating a clean,quiet ceiling appearance. Available finishes include Anodized Gold and Silver for a decorative accent or Anodized Black for an ultimate quiet ceiling aesthetic.These beautiful trim accessories have been specifically designed to minimize any effect on light performance,color,and output.Specular Reflectors are available for both Adjustable and Fixed downlights,and are compatible with ELEMENT 3"trims and housings. • Can be easily installed or removed • Assembles to existing trim SHOWN IN ANODIZED BLACK (REFLECTOR ONLY) • Compatible with Fixed and Adjustable Housings • Finish Options:Anodized Gold(G),Anodized Black(B)or Anodized Silver(S) SPECIFICATIONS L COMPATIBLE TRIMS NON-SLOTTED SLOTTED (FOR FIXED') (FOR ADJUSTABLE) E3TREFNSI E3TREFS4 3"round,flanged,bevel (B.G.5) (B,G,5) SHOWN IN ANODIZED GOLD 3"square,flanged,bevel E CBRG,5)5 E3BT GEFSSI (TRIM MOUNTED) /LJ\ O 3"round,flanged,flat E(B,G,S 51 E3TREFS4(B,G, (B,G,S) (B,G,S) ❑ E3TREFN53 E3TREFS2 flanged,flat (B,G,S) (B,G,S) E3TREFNS2 E3TREFS6 © 3"round,flangeless,bevel (B,G,S) (B,(6,G,G,S) SHOWN IN ANODIZED GOLD (BELOW CEILING VIEW) E3TREFN56 E3TREFSS • 3"square,flangeless,bevel / (g,G.5) (B.G.S) O 3"round,flangeless,flat �8 E3TREFN54 (B.G,E3TREFS3 (B,G,S) (B,G,S) ❑ 3"square,flangeless,flat e) E3TREFNS3 E3TREFS2 May require lamp to be placed in high position. Not compatible with lensed trims. SHOWN IN ANODIZED SILVER ,Non-slotted Reflectors may be used in Adjustable Housings with the lamp assembly placed in the Cr tilt position. (BELOW CEILING VIEW) ORDERING GRID E3 TRIM-MOUNTED REFLECTORS PRODUCT STYLE FINISH E3TREF N51 ON-SLOTTED B ANODIZED BLACK N52 ON-SLOTTED G ANODIZED GOLD N53 ON-SLOTTED 5 ANODIZED SILVER N54 ON-SLOTTED SHOWN IN ANODIZED BLACK N55 ON-SLOTTED (BELOW CEILING VIEW) N56 ON-SLOTTED Si LOTTED 52 LOTTED 53 LOTTED 54 LOTTED 55 LOTTED 56 LOTTED E3TREF Reflectors are placed on top of the inside of the trim or affixed via screws(only if provided). ©2020 Tech Lighting,L.L.C.All rights reserved.The Tech Lighting logo Is a registered trademark of Tech Lighting. Tech Lighting reserves the right to change specifications for product improvements without notification. 06/04/2021 SAGE COURT ADDITION PAGE 7 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES A2 TECH LIGHTING Housing: E3R-*-L0-930-*- Housing: Recessed adjustable LED downlight,12W,13191m, Verify all TBD A-I-* 90+CRI,3000K,beam spread TBD, IC rated airtight housing, options.Trim Trim: E3R-*-*-H-* dimming TBD,120V. to be Trim:Trim style TBD,shower solite lens,finish TBD. coordinated with ceiling thickness. 11._. TECH LIGHTING ELEMENTTM 3" LED ADJUSTABLE DOWNLIGHT The ELEMENT 3"Next Generation Adjustable recessed downlight features full adjustability with lockable, tool-free,hot aiming.ELEMENT's patented high/low lamp positioning allows the LED to be positioned closer to the aperture for maximum light output and efficiency or higher in the ceiling to minimize glare and flash SHOWN IN FLANI;ELESS BEVEL SQUARE on the trim.Options include premium Warm Dimming,Tunable White,Xicato and Xicato Artist Series LED modules.Trim options include Flanged or Flangeless and Flangeless in Wood Ceiling. LUMEN MULTIPLIER(CRI/CCT) 80 CRI • Housing reduced by 60% • Standard phase dimming down to 1% CCT MULTIPLIER • Tool-free aiming/locking:0-40°tilt,361°rotation • Trims reflector options 2700K 0.95 0.80 3000K 1.00 0.85 • Patented high/low lamp positioning • Solite Soft Focus lens option 3500K 1.05 0.90 • 2-step standard Lumen output will vary by CCT and CRI. See photometric charts for output'information. SPECIFICATIONS STATIC WHITE XICATO WARM DIM TUNABLE WHITE HIGH LOW STANDARD ARTIST LOW HIGH OUTPUT HIGH OUTPUT OUTPUT OUTPUT SERIES SERIES OUTPUT (5000K) (4000K) DELIVERED LUMENS 1800/1450 1319/1124 1129 945 1300 900 1272 1150 WATTS 17 12 15 15 17 12 18 18 EFFICACY 106/85 I 110/94 75 63 76 75 72 64 CRI 80+/90+ 80+ 95+ 90+ 90+ 10°-19,414 118°-5,848 CBCP 25°-5,416 140°-3,230 21°-3,184 143°-2,733 I60°-1,014 18°-N/A 125°-N/A 140°-1,622 160°-N/A 60°-2,305 CCT OPTIONS 2700K,3000K or 3500K 2700K,3000K or 3500K' 3000K-1800K 5000K-2700K 4000K-1800K COLOR CONSISTENCY 2-step 1 X 2-step 3-step 2-step VOLTAGE 120V or 277V Standard phase dimming(down to 1%)I 0-10V(down to 5%) eldoLED 0-10V or Deli DIMMING' Lutron Hi-lume EcoSystem(down to 01%) (down to 0.1%) Lutron Hi-lume 2-Wire(down to 1%)I eldoLED 0-10y or Deli(down to 0.1%) POWER SUPPLY Constant current driver with+,9 power factor and+80%efficiency OPTICS Field changeable. Field changeable: Field changeable: 10°,18°,25°,40°,60°TIR 21°,43°,60°Reflector 18°,25°,40°,60°TIR • ADJUSTABILITY Lockable,hot-aiming 0-40°tilt,361°rotation,high/low lamp positioning,45°collar rotation CEILING APPEARANCE Flanged,Flangeless or Flangeless in Wood Ceiling Flanged.Up to 2-1/2" Flangeless:No ceiling thickness limitations CEILING THICKNESS Flangeless in Wood Ceiling',1/2"to 2" Note'.Thicker ceilings impact light cutoff CEILING APERTURE 3-7/8"ceiling cutout HOUSING IC Airtight,Non-IC Airtight,Chicago Plenum.IC suitable up to R60 spray foam insulation. Sauna/Steam-room use available only with combination of H Shower trim.LO Low Output housing,and I IC housing rating. CONSTRUCTION Housing:Heavy-Gauge,Cold-Rolled Steel Trim,Die-Cast Aluminum FINISH Housing,Black Powder Coat Trim:Antique Bronze,Black,Satin Nickel,White(paintable) GENERAL LISTING ETL listed.Damp listed.Shower version Wet listed. CALIFORNIA TITLE 24 Registered CEC Appliance Database.Can be used to comply with CEC 2019 Title 24 part 6(JA8-2016,JA8-2019)(for 90 CRI versions). L70 50,000 hours min WARRANTY' 5 years Data in chart reflect 3000K/80 CRI values unless noted. Custom Output/Custom RAL/Custom CCT available.Contact Quotes Department Ordering grids available on page 2. Accepts two optical controls and an optional trim-mounted lens. ,SeeELEMENT-Lighting.com for dimmer compatibility 2wsit ELEMENT-lightin9.com for specific warranty imitations and details. 33500K Xicato module not available for Artist series. 02020 Tech Lighting,L.L.C.All rights reserved.The Tech Lighting logo Is r registered trademark of Tech Lighting. CE IVE r) Tech Lighting reserves the right to change specifications for product improvements without notification. UPDATED 12�� 06/04/2021 SAGE COURT ADDITION PAGE 8 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES A2 TECH LIGHTING Housing: E3R-*-L0-930-*- Housing: Recessed adjustable LED downlight,12W,13191m, Verify all TBD A-I-* 90+CRI,3000K,beam spread TBD, IC rated airtight housing, options.Trim Trim: E3R-*-*-H-* dimming TBD,120V. to be Trim:Trim style TBD,shower solite lens,finish TBD. coordinated with ceiling thickness. 11._. TECH LIGHTING ELEMENTTM 3" LED ADJUSTABLE DOWNLIGHT ORDERING GRIDS HOUSING CEILING BEAM HOUSING PRODUCT APPEARANCE OUTPUT CRI/CCT SPREAD FUNCTION RATING DRIVER VOLTAGE E3R ELEMENT 3" LF FLANGELESS -LH HIGH OUTPUT, 827 80 CRI,2700K,2-STEP 0 10°4 A ADJUSTABLE I IC AIRTIGHT STANDARD PHASE 1% 120 VOLT ROUND FF FLANGED 17W 830 80 CRI,3000K,2-STEP 1 18° N NON-IC (LEAVE BLANK) (LEAVE BLANK) E35 ELEMENT 3" WC WOOD CEILING, -LO LOW OUTPUT, 835 80 CRI.3500K.2-STEP 2 25° AIRTIGHT -010 0-IOV DIMMING 5% -277 277 VOLT SQUARE 12W3 927 90 CRI,2700K,2-STEP 4 40° C CHICAGO -ELDO ELDOLED 0.1%0-10V LINEAR+' 930 90 CRI,3000K,2-STEP 6 60° PLENUM -ELDOA ELDOLED 0.1%0-10V 935 90 CRI,3500K,2-STEP E EMERGENCY LOGARITHMIC`+ WD 90 CRI,3000-1800K, BATTERY -ELD1 ELDOLED 1%0-10V LINEAR+' WARM DIM.3-STEP (NON-IC/ -ELD1A ELDOLED 1%0-10V TW52 90 CRI,5000K-2700K, CHICAGO LOGARITHMIC`+ TUNABLE WHITE,2-STEP' PLENUM) -ELDD ELDOLED 0.1%DALIs TW41 90 CRI,4000K-1800K, -ELTD ELDOLED TUNABLE WHITE TUNABLE WHITE,2-STEP; 0.1%0-10V LINEAR;.`+ -ELTD ELDOLED TUNABLE WHITE -X XICATO, 127 80 CRI,2700K, 21 21°XICATO 0.1% HIGH OUTPUT, 1X2-STEP,XICATO 43 43°XICATO -HL2W LUTRON HI-LUME 1%2-WIRE5,6 14W 130 80 CRI.3000K, 60 60°XICATO -HLECO LUTRON HI-LUME 0.1% 1X2-STEP,XICATO ECOSYSTEM 135 80 CRI,3500K, 1X2-STEP,XICATO A27 95 CRI,2700K,1X2-STEP, XICATO ARTIST A30 95 CRI,3000K,1X2-STEP, XICATO ARTIST A Trims are required and must be ordered separately. For dimming details,refer to Dimmer Compatibility Chart. 1WC-Wood Ceiling option accommodates Flangeless trims only. 2LO-Sauna/Steam-room use available only with combination of H Shower trim.LO Low Output housing,and I IC housing rating. 3TW52/TW41/ELTO/ELTD-Tunable White Only available in High Output,only available with ELTO(0-10V,linear),or ELTD(Dali).For 0-10V logarithmic dimming consult Quotes Department. 40-10°optic has a unique LED module not available with Warm Dim or Tunable White.Changing optics to 18°,25°,40°or 60°,will require a new LED module. SLutron Hi-lume and eldoLED dryers not compatible with Round Manacles,(E3RLF)or Round Wood Ceiling(E3RWC)housings. SHL2W-Lutron Hi-lume 2-wire phase dimming(down to 1%),120V only TRIM CEILING PRODUCT APPEARANCE STYLE APERTURE FINISH E3R ELEMENT 3''ROUND L FLANGELESS B BEVEL -0 NO LENS Z ANTIQUE BRONZE E3S ELEMENT 3''SQUARE F FLANGED UP TO I"CEILING THICKNESS F FLAT -H SHOWER, B BLACK F15 FLANGED 1.1"-1.5"CEILING THICKNESS -L LENSED S SATIN NICKEL F20 FLANGED 1.6"-2.0"CEILING THICKNESS W WHITE F25 FLANGED 2.1"-2.5"CEILING THICKNESS Wood Ceiling option accommodates Flangeless trims only. 1H-Sauna/Steam-room use available only with combination of H Shower trim,LO Output housing,and I IC housing rating. REPLACEMENT OPTICS REPLACEMENT REFLECTORS' BEAM BEAM PRODUCT SPREAD PRODUCT SPREAD 353E4LEDCOPT 18 18° 352LEDXREF 21 21° 25 25° 43 43° 40 40° 60 60° 60 60° 353E4LEDCOPT 352LEDXREF 'For use with Xlcato modules only 02020Lighting,L.L.C.Arights reserved.The Tech Lighting 1090 is a registered trademark of Tech Lighting. CEIVETec,Li=reerve,terigttoc,a,gespe htionsorprctimprovementswithoutnofication.2 R D 06/04/2021 SAGE COURT ADDITION PAGE 9 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES A2 TECH LIGHTING Housing: E3R-*-L0-930-*- Housing: Recessed adjustable LED downlight,12W,13191m, Verify all TBD A-I-* 90+CRI,3000K,beam spread TBD, IC rated airtight housing, options.Trim Trim: E3R-*-*-H-* dimming TBD,120V. to be Trim:Trim style TBD,shower solite lens,finish TBD. coordinated with ceiling thickness. 11._. TECH LIGHTING ELEMENT' 3" LED ADJUSTABLE DOWNLIGHT TRIMS FLANGED FLANGELESS FINISH 4.3• 0.3'1 f 1 f I O 1 32 ■ 109mm io,mm 1 ION f e,mm l 11.11P33' 3,•Blmm 81 mm O ANTIQUE lt.)9m ll.)1 11.71 11)9 BRONZE 43m 43mm 43mm a3mm ROUND BEVEL SQUARE BEVEL ROUND BEVEL SQUARE BEVEL ■ 1143.09 mm 0.3 3.2• 3_2' fto9mml f8,mm1 fslmml BLACK 4R]'J WJ9 3m .mm3mm 03 mmmm 4m ROUND FLAT SQUARE FLAT ROUND FLAT SQUARE FLAT N NICK CKEL f 109mm 1 f.9mm 1 3.z• 3_z' _ f6,mm1 f6,mm1 3.2• 3.2• O �■�I, �mm u s,mm , o 12.1•J lu WHITE l2_1" 53mm 69mm (PAINTABLE) 53mm 69mm ROUND WALL WASH SQUARE WALL WASH ROUND WALL WASH SQUARE WALL WASH FLANGELESS IN WOOD CEILING LENS OPTION 2• 3_2' fe,mml fa,mml O )C / .,v . ♦ '- ROUND BEVEL(ANTIQUE BRONZE) SQUARE BEVEL(SATIN NICKEL) SHOWN WITH AND WITHOUT A LENS(SQUARE FLANGED BEVEL) 3.2• 3_ f6,mm1 f6,mm21 O 0 4 mm 4mm ROUND FLAT(ANTIQUE BRONZE) SQUARE FLAT(SATIN NICKEL) SHOWN WITH AND WITHOUT A LENS(ROUND FLANGELESS BEVEL) 2' it Ill f16,mml u lO /z'. 53mm 69mm ROUND WALL WASH SQUARE WALL WASH (ANTIQUE BRONZE) (SATIN NICKEL) HOUSING 6" 4. 152 mm 02 mm I\ 5.2. 10.6• 2415mm I/132 mm 11.5' 269 rrr COLLAR HEIGHT O.)5'(19 MM) 292 mm COLLAR HEIGHT 0.)5•(19 MM) 205' 125" (SEE INSTRUCTIONS FOR CEILING 521 mm (SEE INSTRUCTIONS FOR CEILING THICKNESS<0.]5") THICKNESS<0.]5.) / 318 mm IC AIRTIGHT/NON-IC AIRTIGHT/CHICAGO PLENUM EMERGENCY BATTERY(NON-IC AIRTIGHT/CHICAGO PLENUM) ©2020 Tech Lighting.L.L.C.All rights reserved.The Tech Lighting logo Is a registered trademark of Tech Lighting. E I',FE Tech Lighting reserves the right to change specifications for product improvements without notification. 3 R O.- 06/04/2021 SAGE COURT ADDITION PAGE 10 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES A2 TECH LIGHTING Housing: E3R-*-L0-930-*- Housing: Recessed adjustable LED downlight,12W,13191m, Verify all TBD A-I-* 90+CRI,3000K,beam spread TBD, IC rated airtight housing, options.Trim Trim: E3R-*-*-H-* dimming TBD,120V. to be Trim:Trim style TBD,shower solite lens,finish TBD. coordinated with ceiling thickness. 11._. TECH LIGHTING ELEMENT' 311 LED ADJUSTABLE DOWNLIGHT ADJUSTABLE TRIM ADAPTER TRIM ADAPTER INSTALLED HOUSING 0 _HOUSING 11 22 mm I I COLLAR TRIM ADAPTER FLUSH II HOUSING [OIOMMMMMEN 0 _ _ I HOUSING _HOUS 1.6" COLLAR COLLARING 38 mm "' "' ,.625' 16 mm TRIM ADAPTER— U TRIM ADAPTER EXTENDED INSTALL PRIOR TO CEILING Wood Ceiling housings("WC"designation in the ordering grid)ship with an adjustable trim adapter that inserts into the housing aperture and allows standard ELEMENT 3"Flangeless trims to achieve a truly flangeless,flush ceiling appearance in special applications such as wood or stone installation.For use in new construction.Consult installation instructions regarding plenum requirements and ceiling thickness ratios. ©2020 Tech Lighting,L.L.C.All rights reserved.The Tech Lighting logo is a registered trademark of Tech Lighting. Tech Lighting reserves the right to change specifications for product improvements without notification. 4 O.. 06/04/2021 SAGE COURT ADDITION PAGE 11 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES A2 TECH LIGHTING Housing: E3R-*-L0-930-*- Housing: Recessed adjustable LED downlight,12W,13191m, Verify all TBD A-I-* 90+CRI,3000K,beam spread TBD, IC rated airtight housing, options.Trim Trim: E3R-*-*-H-* dimming TBD,120V. to be Trim:Trim style TBD,shower solite lens,finish TBD. coordinated with ceiling thickness. 11._. TECH LIGHTING' ELEMENT' 311 LED ADJUSTABLE DOWNLIGHT TRIM-MOUNTED REFLECTORS ELEMENT Specular Reflectors reduce glare while creating a clean,quiet ceiling appearance. Available finishes include Anodized Gold and Silver for a decorative accent or Anodized Black for an ultimate quiet ceiling aesthetic.These beautiful trim accessories have been specifically designed to minimize any effect on light performance,color,and output.Specular Reflectors are available for both Adjustable and Fixed downlights,and are compatible with ELEMENT 3"trims and housings. • Can be easily installed or removed • Assembles to existing trim SHOWN IN ANODIZED BLACK (REFLECTOR ONLY) • Compatible with Fixed and Adjustable Housings • Finish Options:Anodized Gold(G),Anodized Black(B)or Anodized Silver(S) SPECIFICATIONS COMPATIBLE TRIMS NON-SLOTTED SLOTTED (FOR FIXED') (FOR ADJUSTABLE) \ E3TREFN51 E3TREFS4CD \dlb) 3"round,flanged,bevel (B,G.S) (E.G.5) SHOWN IN ANODIZED GOLD E3TREFNSS E3TREFS1 (TRIM MOUNTED) /LJ\ 3"square,flanged,bevel (4110 (B,G.5) (E.G.5) O 3"round,flanged,flat E(B,G,5 51 E3TREFS4 (B,G,5) (B,G,S) ❑ E3TREFNS3G, �•N E3TREFS2(B,G, 3"square,flanged,flat (B,G,S) �/ (B,G,S) e E3TREFNS2 E3TREFS6 © 3"round,flangeless,bevel (B.G.5) 17f (B,G,5) SHOWN IN ANODIZED GOLD (BELOW CEILING VIEW) E3TREFN56 E3TREFSS • 3"square,flangeless,bevel .(E.G.5) (B.G.5) © 3"round,flangeless,flat g E3TREFN54 E3TREFS3 (B,G,S) (B,G,S) 3"square,flangeless,flat E3TREFNS3 E3TREFS2 (E.G.G,5) (B,G,S) May require lamp to be placed in high position. Not compatible with lensed trims. SHOWN IN ANODIZED SILVER ,Non-slotted Reflectors may be used In Adjustable Housings with the lamp assembly placed in the 0°tilt position. (BELOW CEILING VIEW) ORDERING GRID E3 TRIM-MOUNTED REFLECTORS PRODUCT STYLE FINISH E3TREF NS1 ON-SLOTTED B ANODIZED BLACK N52 ON-SLOTTED G ANODIZED GOLD N53 ON-SLOTTED 5 ANODIZED SILVER N54 ON-SLOTTED SHOWN IN ANODIZED BLACK N55 ON-SLOTTED (BELOW CEILING VIEW) N56 ON-SLOTTED Si LOTTED 52 LOTTED 53 LOTTED 54 LOTTED 55 LOTTED 56 LOTTED E3TREF Reflectors are placed on top of the inside of the trim or affixed via screws(only if provided). ©2020 Tech Lighting,L.L.C.All rights reserved.The Tech Lighting logo Is r registered trademark of Tech Lighting. Tech Lighting reserves the right to change specifications for product improvements without notifi 5 tion. 06/04/2021 SAGE COURT ADDITION PAGE 12 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES G1 LUCIFER LIGHTING CY1-AD-1-*-BK-90C15A-30•Surface mounted adjustable LED monopoint,17W,10391m, Verify all TBD 90+CRI,3000K,beam spread TBD,finish TBD,dimming TBD, options. 120V. CYLINDER I PROJECT NAME: TYPE: SURFACE MOUNT11% Highlight art,objects,places,spaces,seating areas,and archi- tectural details with a classic profile that offers easy-to-adjust, in-field versatility. ORDERING INFORMATION-CYLINDER 7 Quick Ship Product.All rough in components ship within 10 days ' JA8-2019 COMPLIANCE INDICATED BY SHADING up to quantities of 100. CYLINDER FIXTURE RATING CYLINDER BAFFLE LUMEN PACKAGE CCT OPTIC DRIVER EFFECTS MOUNTING FINISH FINISH DEVICE CY1 BK CY1 2.50" AD Standard42° 1 Dry/Damp WH White BK Black STATIC WHITE ?2 2200K* 10 10°* INTEGRAL STANDARD ROUGH-IN (only lonlyavailable EFFECTS DEVICE 9D Max 90°Tilt* 2 Wet BK Black available for for80C12A, CA2 120-277V JBMP 4"S or4/0 * Wat 80C12A 80+CRI,Delivered Lumens-790q Iolnt oavailable h;m rzxeE AB ArchitecturalsacRn 9octOA and 0-10V Analog 4 Soft Focus Junction 80C19A 80+CRI,Delivered Lumens-1216 27 2700K 97C09A.Not lead time) Bronze* avaiublefor Lens Box Mounting AS Standard *On�esedleadtimel 90C10A90+CRI,De[AeredLumens-676 30 3000K 2000K CE2 120VElectronic Plate Q AG Satin Silver* 90C15A 90+CRI,Delivered Lumens-1039 35 3500K 15 15° ELV Forward/ 0 No Lens* * Shallow Canopy* *Iinveasedloadtimel Reverse Phase `Istanaardmrto' FINISH OUT Remmedriveronly; 97C09A 97+CRI,Delivered Lumens-603 40 4000K 20 20° optic.Notxvailablefor increased lead time] MA Machined 97C14A 97+CRI,Delivered Lumens-925 Worm Rim,0,Wel SMK3 3/0 Surface Aluminum* 40 40° REMOTE 1120V) looationl 9S Max 90°Tit Aluminum* REMOTE Mount Kit 0 Shallow Canopy* 95,orwetlooatiool 60 60° py* TR2 Philips,2%Leading/ ALTERNATE SMK4 4/OSurface *INotavailable for CF Custom Finish* Trailing/Tdac* EFFECTS DEVICE Wet location Remote *Itonwltpadoryl Mount Kit 0 driveronly;inrreased WARM DIM 20 20° 'Mot available tore*Cl2A, lead time) 40 40° 90C10A,and 97C09A unless 10°2 Honeycomb CMJB 1/2"and 3/4" 90W11A 90+CRI,Delivered Lumens-869 WL 2700K- optic is specified! Louver* Conduit Incandescent Profile 1800K 60 60° L23 Lutron,Hi-Lume 'INotavailable for ----- ----- ----- Worm Dim,orWet Ceiling Mount 90W13A90+CRI,DeliveredLumens-915WD3200K- 1%2-Wire location) Junction Box* Halogen Profile 1800K 3 Clear Glass 'INot available for MA finish or *SEE PAGE 3 FOR DETAILED WARM DIM REMOTE1120.277V) Wet location,Quick Ship PROFILE COMPARISON. Product for Lens* finshesonlyWHandBK Q LHI Lutron,Hi-Lume 'INotavailable for 1%Ecosystem Worm Dnrl AN4 PhilpsXitanium 5 Frosted Glass 1%0-10V,LOG Lens LN2 PhibpsXitanium 6 Frosted Soft 1%0-10V,LIN Focus Lens EA2 eldoLED,SOLOdrive 7 Frosted Linear 0.1%0-10V,LOG Spread Lens LA2 eldoLED,SOLOdmre 0.1%0-10V,LIN *ALL DELIVERED LUMEN OUTPUTS ED1 eldoLED,SOLOdrive AND T24 COMPLIANCE REFLECT 3000K PAIRED WITH 40°OPTIC AND 0.1%DALI,LOG SOFT FOCUS LENS.REFERENCE PAGE 3 FOR ADDITIONAL T24 LD1 eldoLED,SOLOdri e COMPLIANT CONFIGURATIONS. 0.1%DALI,LIN _ ® PART NUMBER NOTES • CY1 ships as e.g.,CY1-AD-1-WH-90C10A2-3-RMT-4 IWHI IBKI Pal [AG) IMAI • Remote driver ships as e.g.,PS-RMT-90C10A-1 L23 White Black Architectural Bronze Satin Silver Machined • JBMP ships as CY1-JBMP Powder Coat Powder Coat Powder Coat Powder Coat Aluminum • SMK3 ships as CY1-SMK-3/0-(finish) • SMK4 ships as CY1-SMK-4/0-(finish) • CMJB ships as CY1-CMJB-(finish) LUCIFER® luciferlighting.com ©2021 Lucifer•Lighting Company [PH]]+1-210-227-4967 As part of its policy of continuous research and product development,the company [FAX]+1-210-227-7329 LIGHTING COMPANY reserves the right to change or withdraw specifications without prior notice. [DATE OF REV:01/12/2021] 06/04/2021 SAGE COURT ADDITION PAGE 13 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES G1 LUCIFER LIGHTING CY1-AD-1-*-BK-90C15A-30-Surface mounted adjustable LED monopoint,17W,10391m, Verify all TBD 90+CRI,3000K,beam spread TBD,finish TBD,dimming TBD, options. 120V. CYLINDER I SURFACE MOUNT ACCESSORIES ALTERNATE EFFECTS DEVICES REPLACEMENT OPTICS EMERGENCY LIGHTING-REMOTE MOUNT ONLY ❑HCL-CY1-03 Honeycomb Louver* Interchangeable optics ❑EMB-S-20/25-120/277-LEDX 20/25 watt max capacity,120 or 277 VAC 60Hz *Not available for Warm Dim,or Wet location) accessible by removing snoot. ❑EMB-S-100-120-LEDX 100 watt max capacity,120 VAC 60Hz ❑COL-CY1-03 Clear Glass Lens* ❑RO-50-15-2 15°optic* ❑EMB-S-100-277-LEDX 100 watt max capacity,277 VAC 60Hz *Not available for Warm Diml *(Not available for Warm Dim) ❑EMB-S-250-120/277-LEDX 250 watt max capacity,120 or 277 VAC 60Hz ❑SFL-CY1-03 Soft Focus Lens ❑RO-50-20-2 20°optic During disruption of main power,emergency battery inverter provides temporary ❑FGL-CY1-03 Frosted Glass Lens ❑RO-50-40-2 40°optic 120V or 277V to fixture. ❑FSFL-CY1-03 Frosted Soft Focus Lens ❑RO-50-60-2 60°optic ❑FLSL-CY1-03 Frosted Linear Spread Lens STATIC WHITE PERFORMANCE-3000K 10.OPTIC 15°OPTIC 20°OPTIC 40°OPTIC 60°OPTIC OUTPUT MULTIPLIER LUMEN WATTAGENO SOFT FOCUS LENS SOFT FOCUS LENS SOFT FOCUS LENS SOFT FOCUS LENS SOFT FOCUS LENS PACKAGE DELIVERED LPW DELIVERED LPW DELIVERED LPW DELIVERED LPW DELIVERED LPW CCT CCT SCALE 80C12A 10 693 40117W1 884 88 665 67 790 79 791 79 2200K (Consult factory for JAR 0.800 80C19A 17 - - 1363 81 1024 60 1216 76 1218 72 details) 2700K 0.957 90C10A 10 587 34(17W) 731 73 569 57 676 68 676 68 3000K 1.000 90C15A 17 - - 1127 67 874 51 1039 61 1040 61 3500K 1.019 97C09A 10 542 31(17W) 666 67 508 51 603 60 604 61 4000K 1.030 97C14A 17 - - 1028 61 779 46 925 54 926 55 LIGHT LOSS FACTOR MULTIPLIER No Lens 1.05 90W11A 16 - - - - 739 47 869 54 873 55 CGL 1.05 90W13A 16 - - - - 785 49 915 57 919 — SFL 1.00 JA8-2019 INDICATED BY SHADING FGL 0.90 FSFL 0.87 FLSL 0.83 HCL 0.65 WARM DIM PERFORMANCE-SOFT FOCUS LENS-40°OPTIC WARM DIM TO MIRROR HALOGEN DIMMING PROFILE WARM DIM TO MIRROR INCANDESCENT DIMMING PROFILE 90W13A Full on Dimmed Dimmed Dimmed Dimmed Dimmed Dimmed 90W11A Full on Dimmed Dimmed Dimmed Dimmed Dimmed Dimmed 3200K-1800K 100% to 80% to 70% to 50% to 20% to 10% to 2% 2700K-1800K 100% to 80% to 70% to 50% to 20% to 10% to 2% CCT(K) 3200 3150 3100 3000 2700 2200 1800 CCT(K) 2700 2650 2620 2520 2180 1950 1800 Light Output(Lml 915 732 641 1 457 183 91 18 Light Output(Lm) 869 880 770 550 220 110 30 Power MI 16 13 11 8 3 1.7 0.3 Power(W) 16 13 11 B 3 1.7 0.3 Efficacy ILPWI 57 57 57 57 57 57 57 Efficacy(LPW) 54 54 54 54 54 54 54 3300 2800 3100 2600- 2900 2700 2400 CCT 2500 CCT 2200 IKI 2300 (KI 2000 2100 1900 1800 1700 1600 20% 40% 60% 80% 100% 20% 40% 60% 80% 100% DIMMING% DIMMING% LUCIFER® luciferlighting.com ©2021 fits Lighting Company [FH]+1-210-227-4967 As part of its policy of continuous research and product development,the company +1-210-227-4967 LIGHTING COMPANY reserves the right to change or withdraw specifications without prior notice. [DATE OF REV:01/12/2021] 06/04/2021 SAGE COURT ADDITION PAGE 14 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES G1 LUCIFER LIGHTING CY1-AD-1-*-BK-90C15A-30•Surface mounted adjustable LED monopoint,17W,10391m, Verify all TBD * 90+CRI,3000K,beam spread TBD,finish TBD,dimming TBD, options. 120V. CYLINDER I SURFACE MOUNT STEM ASSEMBLY DIMENSIONS/DRAWINGS Q LUMINAIRE Body with integrated heat sink and LED. 0 CY1-AD/9D ————O Conceals hidden twist-on mounting hardware. Power supply may be integral or remote 1.50" i Imount. 138mm1 . 0 STANDARD CANOPY - .1\� _,.;,;:- Die-cast canopyaccommodates flat and slope 5.60" 42°standard^ :., :::: „ 90°optional' y t: -t4;� ceiling conditions.Conceals hidden twist- (142mml ... on mountinghardware."AD"142°tilt,357° _ _ Lei ♦ ' '° ° ° ''':,•pp'---- 'w eia::;::'••'/.' Y rotation)and"9D"(90°tilt,357°rotation) 3.80" , Y♦ r:`r canopyfeatures 1.50"(38mm)tall canopy. (97mm) Available with integral or remote driver. / .... u- Q SHALLOW CANOPY 1— 02.50" Die-cast canopy accommodates flat and (64mml slope ceiling conditions.Conceals hidden Cylinder weight-1.40 lbs twist-on mounting hardware."AS"(42°tilt, 357°rotation)and"95"(90°tilt,357°rotation) canopy features 0.50"(13mm)tall canopy, reducing overall height.Requires remote power supply. CY1-AS/95 CO STANDARD OPTICS I Proprietary optics available in 10°,15°,20°, 0.50"113�m)I:r I: 40°&60°beams. © €:`•':. EFFECTS DEVICE 42°standard Threaded removable cowling provides virtually 4.60" _0 90°optional A:i•:;i;;;;:fe, seamless joint with fixture body and accepts 1 (117mm1 e,;°°;a°•••°; ',;8- lens;soft focus lens standard.Sealed in place - ♦♦ �' for Wet locations. 3 80" �,'• .•y ••i.,, ' O197mm1 urrrrr `'ear.4 WALL-MOUNT .. ,,. Cylinder may be wall mounted using any ' mounting option,Dry/Damp location only. 1— 02.50" (64mm1 Cylinder weight-1.20 lbs 0 —,. 42°standard • 90°optional a LUCIFER® luciferlighting.com ©2021 Luciferm Lighting Company [PH]]+1-210-227-4967 ��� As part of its policy of continuous research and product development,the company Ft [FAX]+1-210-227-7329 LIGHTING COMPANY reserves the right to change or withdraw specifications without prior notice. [DATE OF REV:01/12/2021] L� 101) 06/04/2021 SAGE COURT ADDITION PAGE 15 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES G1 LUCIFER LIGHTING CY1-AD-1-*-BK-90C15A-30•Surface mounted adjustable LED monopoint,17W,10391m, Verify all TBD 90+CRI,3000K,beam spread TBD,finish TBD,dimming TBD, options. 120V. CYLINDER 1 SURFACE MOUNT MOUNTING DIMENSIONS/DRAWINGS Q JBMP Existing J-Box Mounting plate(concealed)for standard 4" O—— ^ Existing J-Box �> square or 4/0 j-box.To be installed during ld 7�F , II= rough-in prior to substrate.Fixture to mount (i� flush with minimalist transition to ceiling. ���1, J-Box mounting © plate SMK3 Surface mount kit includes mounting plate VA and 4"concealer plate that installs between �'� fixture and standard 3"3/0 j-box for existing *4 applications where standard j-box cutout is to Ceiling substrate, be concealed. cutout as required Q SMK4 Surface mount kit includes mounting plate Ceiling substrate and 5"concealer plate that installs between 02-1/8"158mm) fixture and standard 4"4/0 j-box for existing cutout applications where standard j-box cutout is to be concealed. O CMJB Ceiling mount junction box perfectly matches the cylinder profile for a continuous, 0—— integrated look where exposed ceiling mount • junction box and conduit applications apply. li+l 7 For use with 1/2"and 3/4"EMT conduit only. IMMO Features two conduit entrances on either 2.68168mml side and one conduit knockout on top of j-box. EMT conduit .ri•IV J-box is IP10 rated;painted finishes only. (by others),no MN Blank off plugs included. fitting required 1 1 Blank off plug MOUNTING NOTES Mounting adaptor plate • CY1-JBMP and CY1-SMK-3/0&4/0 not recommended for use with pancake style j-box. REMOTE POWER SUPPLY PS-RMT weight-1.40 lbs © PS-RMT a 1, 6.60"1168mm1—\ Remote power supply provides additional -- �� _L(51 mm) driver options.Mounting device still required. �U11)))�� � Consult install guide for maximum allowable secondary run lengths between PS-RMT and �/�^�ik. 3.20"(81mm1 / cylinder. winsdung suppliedConit&bywiri others man MR Cylinder weight-1.20 Lbs LUCIFER® luciferlighting.com ©2021 Lucifer•Lighting Company [PAX+1-210-227-4967 RECEIVED As part of its policy of continuous research and product development,the company rt [FAX]+1-210-227-7329ift LIGHTING COMPANY reserves the right to change or withdraw specifications without prior notice. [DATE OF REV:01/12/2021] 06/04/2021 SAGE COURT ADDITION PAGE 16 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES G1 LUCIFER LIGHTING CY1-AD-1-*-BK-90C15A-30•Surface mounted adjustable LED monopoint,17W,10391m, Verify all TBD * 90+CRI,3000K,beam spread TBD,finish TBD,dimming TBD, options. 120V. CYLINDER I SURFACE MOUNT TECHNICAL CONSTRUCTION CHANGE LOG Cylinder:Die-cast aluminum body;extruded aluminum internal heat- 1.01/12/2021:ADDED 2200K,2700K-1800K WARM DIM AND 10 DEGREE sink;painted finishes are granulated powder coat. OPTIC OFFERINGS. CMJB:Die-cast aluminum body;painted finishes are granulated powder 2.10/21/2019:NEW CONSOLIDATED SPEC SHEET WITH SINGLE coat. NOMENCLATURE FOR SPECIFICATION. Remote Power Supply:22 Gauge galvanized steel. 3.10/21/2019:NOW OFFERED WITH SATIN SILVER FINISH. STATIC WHITE LED 4.10/21/2019:ADDED QUICK SHIP. 2-step MacAdam ellipse LED module available in 80+,90+and 97+CRI configurations in color temperatures of 2200K,2700K,3000K,3500K and 4000K.Average rated lamp life:50,000 hours.LED and driver assemblies are field-replaceable. WARM DIM LED • 3-step MacAdam ellipse warm dim LED module available in 90+CRI configuration.3200K or 2700K at full brightness,warming to 1800K at full dim. Average rated lamp life of 50,000 hours.LED and driver assemblies are field-replaceable. POWER SUPPLY PERFORMANCE AND DIMMING INFORMATION PowerSupply CA2 CE2 TR2 l23 Di1 AN4 LN2 EA2 LA2 ED1 Minimum°C -20°C -20°C -20°C 0°C 0°C 20°C 20°C 20°C 20°C 20°C 20°C Maximum°C 40°C 40°C 40°C 40°C 40°C 40°C 40°C 40°C 40°C 40°C 40°C Dimming% 2.0% tJOTE 2.0% 1.0% 1.0% 1.0% 1.0% 0.1% 0.1% 0.1% 0.1% CE2 Dimming:80C12A,90C10A and 97C09A feature 3%dimming.80C19A, 90C15A and 97C14A feature 2%dimming. Note:For TR2,L23,LH1,AN4,LN2,EA2 and LA2 drivers consult chart on page 6 to confirm appropriate dimming curve for compatibility with selected control. MOUNTING Cylinder is supplied with a mounting adaptor plate,which integrates with required additional mounting accessories specified separately according to field application conditions,providing a minimalist transition from standard 4/0 or 4"square junction boxes and accommodating ceiling thicknesses of 0.44"(12mm)to 0.75"(19mm).Ceiling-mount junction box available for 1/2"(13mml and 3/4"(19mm)conduit and feature concealed internal clamps for clean fitting-free conduit exit and entry. LISTING cTUVus listed to UL1598 standard for Dry/Damp and Wet locations.Title 24 JA8-2019 Listed. WARRANTY Manufacturer's 1-year warranty guarantees product(s)listed to be free from defects in material and workmanship under normal use and service.5-year warranty on LED and power supply to operate with 70%of the original flux and remain within a range of 3 duv.10-year Lutron Advantage limited warranty available on Lutron equipped systems.Warranty period begins from the date of shipment by Seller and conditional upon the use of manufacturer-supplied power supply. Consult website for full warranty terms and conditions. LUCIFER® luciferlighting.com ©2021 Lucifer•Lighting Company [PH]]+1-210-227-4 ��� As part of its policy of continuous research and product development,the company rik [FAX]+1-210-227-7967 329 LIGHTING COMPANY reserves the right to change or withdraw specifications without prior notice. [DATE OF REV:01/12/2021] 06/04/2021 SAGE COURT ADDITION PAGE 17 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES H1 DMF LIGHTING Housing: DRDH-N-JO-* Surface mounted LED downlight,17W,15001m,90+CRI, Verify all TBD LED Module: DRD5S-8-R- 3000K,dimming TBD,120V. options. 15-9-30-* DRD5S & SurfaceFrame Project: Type: 8" Round Surface Mount LED Area Light New Construction Product Code: Date: DRDHNJO Octagonal Junction Box Spec Sheet V-10.01.20 '/ • 8"round area light for lighting smaller erf spaces including bathrooms,closets /I and kitchens • Extends just 0.6"below the ceiling plane to minimize visual profile • Features multiple ratings to meet the '1•'• demands of a wide range of situations Application Aperture New Construction 4"Octagonal Junction Box Delivered Lumens Color Quality 1500 Im(17W) 90+CRI,<3-step SDCM Color Temperature Input Voltage O 120/277V O O Dimming 2700K 3000K 3500K TRIAL/ELV 5%,0-10V 1% Emergency Lighting Shape Finish Optional Emergency LED Driver for lighting up to 8"Round White 90 minutes in event of power failure Housing Ratings Module Ratings 6-0 Code compliant for use STC/IIC ASTM E283 IC(Insulation onO We cd for in appropriate fire-rated Sound Rated Certified Contact)Rated Wet Location assemblies up to a Air Tight maximum of 2-hours Standards Guarantee m cgLus 50,000 hrs I 5 years a 0 rir�r a za LISTED dmflighting.com dmf ECEIVED 06/04/2021 SAGE COURT ADDITION PAGE 18 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES H1 DMF LIGHTING Housing: DRDH-N-JO-* Surface mounted LED downlight,17W,15001m,90+CRI, Verify all TBD LED Module: DRD5S-8-R- 3000K,dimming TBD,120V. options. 15-9-30-* DRD5S & SurfaceFrame dmf 8" Round Surface Mount LED Area Light General New Construction PRODUCT BUILDER DRDHNJO Octagonal Junction Box HOUSING PRODUCT CODE APPLICATION APERTURE OPTION DRDH Housing N New Construction JO SurfaceFrame Octagonal Junction Box [Blank] Integrated Driver 15OSEMS EM Driver',0-10V LED MODULE PRODUCT CODE DIMENSION SHAPE LUMENS CRI CCT DRIVER DRD5S Module 8 8"Diameter R Round 15 1500 Im 9 90+CRI 27 2700K [Blank] TRIAC/ELV 30 3000K 0 0-10V 35 3500K A Alternate' 'EM option(housing)and Alternate driver(module)must be selected together DMF LIGHTING 1118 E.223rd St.Carson,CA 90745 800.441.4422 dmflighting.com C IVE 2019 DMF Lighting.All Rights Reserved.Specifications subject to change without notice.See website for U.S.and international patent information. Page 2 of 7 �E 7. 06/04/2021 SAGE COURT ADDITION PAGE 19 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES H1 DMF LIGHTING Housing: DRDH-N-JO-* Surface mounted LED downlight,17W,15001m,90+CRI, Verify all TBD LED Module: DRD5S-8-R- 3000K,dimming TBD,120V. options. 15-9-30-* ')RD5S & SurfaceFrame dmf 8" Round Surface Mount LED Area Light General New Construction HOUSING DRDHNJO Octagonal Junction Box SurfaceFrame -4. New Construction Octagonal Junction Box DRDHNJO b SUMMARY JUNCTION BOX:Equipped with(4)1h"trade size knockouts(two Aside,two top)to allow straight conduit runs.Approved for 6(three lfr ®' in,three out)#12 AWG 70°C through wiring conductors. MOUNTING:Pre-installed mounting brackets allow vertical O adjustment of bar hangers up to 1" CEILING:1h"up to 1 3/4" CUTOUT:4 1/8"(105mm)octagonal opening LISTINGS:Metallic outlet box certified UL514A,code compliant for use in appropriate fire-rated assemblies for up to 2-hours, STC/IIC Sound Rated,ASTM E283 certified Air Tight,IC (Insulation Contact)rated WARRANTY:5 year limited warranty SurfaceFrame SurfaceFrame w/Emergency Lighting DRDHNJO DRDHNJO EM VW TVIATITVVM Y--- ) 4!" o c (125mm) 41s s L 4," 85mm) (105mm) (105mm) OCTAGONAL OCTAGONAL CUT OUT CUT OUT ®h len ID ell 1 IID7 CI Ye" ® lD " � , (1almm) o® IQ.. Ammo (3afimm) UP TO 24 (610mm) i D a I111 111 11 D d I. r 1 UP TO 24" 1 (fi10mm) A ` DMF LIGHTING 1118 E.223rd St.Carson,CA 90745 800.441.4422 dmflighting.com toC��� 2019 DMF Lighting.All Rights Reserved.Specifications subject to change without notice.See website for U.S.and international patent information. Pa E 1.P, 06/04/2021 SAGE COURT ADDITION PAGE 20 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES H1 DMF LIGHTING Housing: DRDH-N-JO-* Surface mounted LED downlight,17W,15001m,90+CRI, Verify all TBD LED Module: DRD5S-8-R- 3000K,dimming TBD,120V. options. 15-9-30-* DRD5S & SurfaceFrame dmf 8" Round Surface Mount LED Area Light General New Construction MODULE DRDHNJO Octagonal Junction Box DRD5S 8" Round Surface Mount LED Module DRD5S 1111112- SUMMARY LED:Samsung optimized LED array SHAPE:8"round MODULE LUMENS:1500 Im(17W) COLOR QUALITY:90+CRI,less than 3-step SDCM CCT:2700K,3000K,3500K INPUT VOLTAGE:120/277V DIMMING:TRIAC/ELV at 120V,0-10V at 120/277V MAX INPUT CURRENT(120V):0.15 amps uMAX INPUT CURRENT(277V):0.06 amps r L_ 1 11 115/16" POWER FACTOR:Greater than 0.9 (49m") TOTAL HARMONIC DISTORTION:Less than 20% %" _ AMBIENT OPERATING TEMPERATURE:-20°C to 40°C (lsmm) EMERGENCY LIGHTING:Optional Emergency LED Driver for lighting up to 90 minutes in event of power failure PHOTOMETRIC TESTING:Tested in accordance to IESNA LM-79-2008 TRIM:Edgeless die-cast aluminum 8 j" LISTINGS:ENERGY STAR®qualified,California Title 24 2016 JA8 (21 0mm) compliant,UL Listed for Wet Location,cULus Listed LIFETIME:50,000 hours at 70%lumen maintenance WARRANTY:5 year limited warranty DMF LIGHTING 1118 E.223rd St.Carson,CA 90745 800.441.4422 dmflighting.com C IVE ©2019 DMF Lighting.All Rights Reserved.Specifications subject to change without notice.See website for U.S.and international patent information. Page 4 of 7 RE e. 06/04/2021 SAGE COURT ADDITION PAGE 21 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES L1 PARADIGM LED ONEFLEX-45-30-20-24-* Channel mounted linear LED tape light for undercabinet Remote driver lighting,4.5W/ft,3381m/ft,90+CRI,3000K,dimming TBD, required.Verify remote driver,24VDC. all lengths per Channel TBD plans.Verify all TBD options. ' . ParadigmLED ONEFLEX INDOOR SERIES - 14_________P_' epplW ILA rxv x __ 141 � +xV an+z{v +24v g-1+21v .1 M"ell if N_ I I II_M M_�! - -✓�PamaigmLED- .J- ea) -.. -. C UL US LISTED ONEFLEX is a series of specification grade linear LED.It offers very tight LED spacing across multiple wattages and CRI of 90 or greater(80+CRI for 1800K&2200K).This product allows for uniform lighting in the smallest of channel profiles. SPECIFICATION + + + + + SERIES WATTAGE COLOR** IP RATING VOLTAGE LENGTH ONEFLEX 20=2.0 W/ft. 18=1800K 20=1P20 Indoor 24=24 VDC 5M=196 inches(5 meter)Reel 45=4.5 Vet. 22=2200K XX=Custom Length(inches) 60=6.0 Wit 80=8.0 W/ft. 30=3000K 35.3500K 40=4000K 50=5000K 65=6500K ELECTRICAL LUMEN OUTPUT Input Voltage 24VDC - INDOOR Dimming Options MLV,O-1OV,DMX,Lutron OneFIex20 2.OW/ftX85lum/W=170 lum/ft Power Consumption 2.0-8.0W/ft. OneFlex45 4.5W/ftX85lum/W=338lum/ft Wire Size 20AWG,2 Wire OneFIex60 6.OW/ftX85lum/W=510lum/ft Regulatory UL Listed file E468751 OneFlex80 8.OW/ftX85lum/W=664lum/ft Max Run Length per feed output+/-1 0% OneFlex 20 44'=(96W) OneFlex 45 22'=(96W) OneFlex 60 16'=(96W) PERFORMANCE OneFlex 80 12'=(96W) CRI 90+(80+CRI for 1800K&2200K) PHYSICAL Binning Tolerance +/-100K Warranty 5 years Field Cuttable Every1.0"(25.4mm) Operating Temperature -20°C(-40°F)to+50°C(+122°F) Environment IP20 Indoor Max Reel Length 16'4" DIMENSIONS DRAWINGS ONEFLEX 004 r B I I I Width 0.39"(1 O.Omm) o[ibeeueloemo+oomm oomo1 Height 0.07"(1.78mm) _ A Cuttable Segment Length 1.0"(25.4mm) Pitch Length 0.09"(2.29mm) oT A:0.39"(10.05mm) B:0.7"(1.78mm) www.paradigmled.com • •. 303.399.0386 I sales@paradigmled.com .:1 . Project In an effort to continually improve our products.we reserve the • ��'•° Type right to change them without prior notice. Rev 7.5 9/19 RECEIVED 06/04/2021 SAGE COURT ADDITION PAGE 22 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES L1 PARADIGM LED ONEFLEX-45-30-20-24-* Channel mounted linear LED tape light for undercabinet Remote driver lighting,4.5W/ft,3381m/ft,90+CRI,3000K,dimming TBD, required.Verify remote driver,24VDC. all lengths per Channel TBD plans.Verify all TBD options. • 0. 'aradigmLED RECOMMENDED CHANNELS QUICK SPEC GUIDE CH• , , PART NUMBER BREAKDOWN AMC-1707-S MATERIAL Anodized Aluminum + + + + DESCRIPTION SERIES DIMENSIONS APPLICATION LENS LENGTH Tf,�J ,��1�yTp Slim and shallow surface mount channel AMC=Alumi- XXXX=WuH(mm) S=Surface Mount C=Clear lens 1M=39 Inches C jl(���] j1 LENGTH nurn Mounting R=Recessed Channel O=Opal lens 2M=78 Inches Channel C=Corner Mount G=Grazer lens I E 39.78 M=Mud In Channel A Mounting Clip LENS TYPES Clear=C Opal=O Grazer=G A:0.68"(17.25mm) II:0.50"(12.59mm) C:0.34"(8.60mm) ACCESSORIES D:0.40"(12.70mm) Endcap AMC-1707-S-EC E:0.78"(19.90mm) Endcap whole AMC-1707-S-ECL Mounting Clip AMC-1707-S-MC AMC-1919-C MATERIAL AMC-1715-R MATERIAL Anodized Aluminum Anodized Aluminum C DESCRIPTION I I DESCRIPTION C Slim corner channel W Slim and deep recessed channel I 14 D ` LENGTH LENGTH 39",78" I D 39",78" Mounting Clip LENS TYPES t LENS TYPES Clear=C � A Clear=C opal=O Opal=O A:0.73"(18.50mm) Grazer-c B:0.48"(12.20mm) A:0.68"(17.25mm) C:0.73"(18.50mm) ACCESSORIES B:0.58"(14.75mm) ACCESSORIES D:0.82"(20.82mm) Endcap AMC-1919-C-EC C•0.98"(25.00mm) Endcap AMC-1715-R-EC E:0.82"(20.82mm) Endcapw/hole AMC-1919-C-ECL D 0.59"(15.05mm) Endcapw/hole AMC-1715-R-ECL Mounting Clip AMC-1919-C-MC " AMC-1715-S MATERIAL AMC-1707-R MATERIAL Anodized Aluminum Anodized Aluminum DESCRIPTION I C I DESCRIPTION I��I Slim and deep surface mounted channel Slim and shallow recessed channel C B ,ID 39".78" BL � D LENGTH �� LENGTH ` 39",78" 1 A 1 1-.-= 1 A Mounting Clip LENS TYPES LENS TYPES Clear=C Clear=C Opal=o Opal=O A:0.68"(17.25mm) Grazer=G Grazer-G A:0.68"(17.25mm) B:0.48"(12.30mm) B:0.50"(12.59mm) C:0.59"(15.05mm) ACCESSORIES ACCESSORIES C:0.98"(25.00mm) D:0.66"(16.76mm) Endcap AMC-1715-S-EC D:0.34"(8.60mm) Endcap AMC-1707-R-EC E0.78"(19.90mm) Endcap w/hole AMC-1715-S-ECL Endcap w/hole AMC-1707-R-ECL Mounting Clip AMC-1715-S-MC www.paradigmled.com •e 303.399.0386I sales@paradigmled.com `l�l• Project In an effort to continually improve our products.we reserve the right to change them without prior notice. Type Rev.7.42/19 AREA'E IVE 06/04/2021 SAGE COURT ADDITION PAGE 23 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES L1 PARADIGM LED ONEFLEX-45-30-20-24-* Channel mounted linear LED tape light for undercabinet Remote driver lighting,4.5W/ft,3381m/ft,90+CRI,3000K,dimming TBD, required.Verify remote driver,24VDC. all lengths per Channel TBD plans.Verify all TBD options. •�) ParadigmLED RECOMMENDED CHANNELS QUICK SPEC GUIDE AMC-1407-S MATERIAL AMC-2111-R MATERIAL Anodized Aluminum Anodized Aluminum DESCRIPTION DESCRIPTION Slim and shallow surface channel. Slim and shallow recessed mount channel. LENGTH ' LENGTH 39",78" 1 _ 39".78" ur LENS TYPES •'j LENS TYPES 0.14 Q.,4 Clear=C Opal=O -(12.Innt1- Opal=O 034 I pinen) I ACCESSORIES ACCESSORIES Endcap AMC-1407-S-EC Endcap AMC-2111-R-EC Endcap w/hole AMC-14O7-S-ECL Endcap w/hole AMC-2111-R-ECL AMC-1616-C MATERIAL AMC-1999-M MATERIAL Anodized Aluminum Anodized Aluminum 19 DESCRIPTION DESCRIPTION Slim corner channel with rounded lens Mud in channel and lens LENGTH 1 LENGTH 39",78" 39".78" CC /AN ,r LENS TYPES LENS TYPES Clear=C 99 •V,. Opal=O Opal=O y r ACCESSORIES 16 1 -I ACCESSORIES Endcap AMC-1999-M-EC Endcap AMC-1616-C-EC Endcap w/hole AMC-1999-M-ECL Endcap w/hole AMC-1616-C-ECL Mounting Clip AMC-1616-C-MC • AMC-2020-S-R0 MATERIAL AMC-2020-S-SQ MATERIAL Anodized Aluminum Anodized Aluminum AI DESCRIPTION DESCRIPTION Slim and deep surface mounted channel Slim corner mount channel w/rounded lens LENGTH 39".78" LENGTH 39".78" LENS TYPES LENS SHAPE O LENS TYPES LENS SHAPE N Opal=O Round=RO 17. 1 CV Opal=O Square=SQ ACCESSORIES ACCESSORIES 19.4 Endcap AMC-2020-RO-EC 19.4 Endcap AMC-2020-SQ-EC Endcap w/hole AMC-2020-RO-ECL Endcap w/hole AMC-2020-SQ-ECL Mounting Clip AMC-2020-RO-MC Mounting AMC-2020-SQ-MC www.paradigmled.com 303.399.0386 I sales@paradigmled.com •.:e . Project In an effort to continually improve our products,we reserve the • �� Type right to change them without prior notice. Rev 7.4 2/19 AREC EIVE 06/04/2021 SAGE COURT ADDITION PAGE 24 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES L2 PARADIGM LED ONEFLEX-45-30-20-24-* Channel mounted linear LED tape light for under vanity Remote driver lighting,4.5W/ft,3381m/ft,90+CRI,3000K,dimming TBD, required.Verify remote driver,24VDC. all lengths per Channel TBD plans.Verify all TBD options. ' . ParadigmLED ONEFLEX INDOOR SERIES - 14_________P_' epplW ILA rxv x __ 141 � +xV an+z{v +24v a 1+21v .1 M"ell if N_ I I II_M M_�! - -✓�PamaigmLED- .J- ea) -.. -. C UL US LISTED ONEFLEX is a series of specification grade linear LED.It offers very tight LED spacing across multiple wattages and CRI of 90 or greater(80+CRI for 1800K&2200K).This product allows for uniform lighting in the smallest of channel profiles. SPECIFICATION + + + + + SERIES WATTAGE COLOR** IP RATING VOLTAGE LENGTH ONEFLEX 20=2.0 W/ft. 18=1800K 20=1P20 Indoor 24=24 VDC 5M=196 inches(5 meter)Reel 45=4.5 Vet. 22=2200K XX=Custom Length(inches) 60=6.0 Wit 80=8.0 W/ft. 30=3000K 35.3500K 40=4000K 50=5000K 65=6500K ELECTRICAL LUMEN OUTPUT Input Voltage 24VDC - INDOOR Dimming Options MLV,O-1OV,DMX,Lutron OneFIex20 2.OW/ftX85lum/W=170 lum/ft Power Consumption 2.0-8.0W/ft. OneFlex45 4.5W/ftX85lum/W=338lum/ft Wire Size 20AWG,2 Wire OneFIex60 6.OW/ftX85lum/W=510lum/ft Regulatory UL Listed file E468751 OneFlex80 8.OW/ftX85lum/W=664lum/ft Max Run Length per feed output+/-1 0% OneFlex 20 44'=(96W) OneFlex 45 22'=(96W) OneFlex 60 16'=(96W) PERFORMANCE OneFlex 80 12'=(96W) CRI 90+(80+CRI for 1800K&2200K) PHYSICAL Binning Tolerance +/-100K Warranty 5 years Field Cuttable Every1.0"(25.4mm) Operating Temperature -20°C(-40°F)to+50°C(+122°F) Environment IP20 Indoor Max Reel Length 16'4" DIMENSIONS DRAWINGS ONEFLEX 004 r B I I I Width 0.39"(1 O.Omm) o[ibeeueloemo+oomm oomo1 Height 0.07"(1.78mm) _ A Cuttable Segment Length 1.0"(25.4mm) Pitch Length 0.09"(2.29mm) oT A:0.39"(10.05mm) B:0.7"(1.78mm) www.paradigmled.com •. 303.399.0386 I sales@paradigmled.com .:1 . Project In an effort to continually improve our products.we reserve the • ��'•° Type right to change them without prior notice. Rev 7.5 9/19 RECEIVED 06/04/2021 SAGE COURT ADDITION PAGE 25 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES L2 PARADIGM LED ONEFLEX-45-30-20-24-* Channel mounted linear LED tape light for under vanity Remote driver lighting,4.5W/ft,3381m/ft,90+CRI,3000K,dimming TBD, required.Verify remote driver,24VDC. all lengths per Channel TBD plans.Verify all TBD options. • 0. 'aradigmLED RECOMMENDED CHANNELS QUICK SPEC GUIDE CH• , , PART NUMBER BREAKDOWN AMC-1707-S MATERIAL Anodized Aluminum + + + + DESCRIPTION SERIES DIMENSIONS APPLICATION LENS LENGTH Tf,�J ,��1�yTp Slim and shallow surface mount channel AMC=Alumi- XXXX=WuH(mm) S=Surface Mount C=Clear lens 1M=39 Inches C jl(���] j1 LENGTH nurn Mounting R=Recessed Channel O=Opal lens 2M=78 Inches Channel C=Corner Mount G=Grazer lens I E 39.78 M=Mud In Channel A Mounting Clip LENS TYPES Clear=C Opal=O Grazer=G A:0.68"(17.25mm) B:0.50"(12.59mm) C:0.34"(8.60mm) ACCESSORIES D:0.40"(12.70mm) Endcap AMC-1707-S-EC E:0.78"(19.90mm) Endcap whole AMC-1707-S-ECL Mounting Clip AMC-1707-S-MC AMC-1919-C MATERIAL AMC-1715-R MATERIAL Anodized Aluminum Anodized Aluminum C DESCRIPTION I I DESCRIPTION C Slim corner channel W Slim and deep recessed channel I 14 D ` LENGTH LENGTH 39",78" I D 39",78" Mounting Clip LENS TYPES t LENS TYPES Clear=C � A Clear=C opal=O Opal=O A:0.73"(18.50mm) Grazer-c B:0.48"(12.20mm) A:0.68"(17.25mm) C:0.73"(18.50mm) ACCESSORIES B:0.58"(14.75mm) ACCESSORIES D:0.82"(20.82mm) Endcap AMC-1919-C-EC C•0.98"(25.00mm) Endcap AMC-1715-R-EC E:0.82"(20.82mm) Endcapw/hole AMC-1919-C-ECL D 0.59"(15.05mm) Endcapw/hole AMC-1715-R-ECL Mounting Clip AMC-1919-C-MC " AMC-1715-S MATERIAL AMC-1707-R MATERIAL Anodized Aluminum Anodized Aluminum DESCRIPTION I C I DESCRIPTION I��I Slim and deep surface mounted channel Slim and shallow recessed channel C B ,ID 39".78" BL � D LENGTH �� LENGTH ` 39",78" 1 A 1 1-.-= 1 A Mounting Clip LENS TYPES LENS TYPES Clear=C Clear=C Opal=o Opal=O A:0.68"(17.25mm) Grazer=G Grazer-G A:0.68"(17.25mm) B:0.48"(12.30mm) B:0.50"(12.59mm) C:0.59"(15.05mm) ACCESSORIES ACCESSORIES C:0.98"(25.00mm) D:0.66"(16.76mm) Endcap AMC-1715-S-EC D:0.34"(8.60mm) Endcap AMC-1707-R-EC E0.78"(19.90mm) Endcap w/hole AMC-1715-S-ECL Endcap w/hole AMC-1707-R-ECL Mounting Clip AMC-1715-S-MC www.paradigmled.com •e 303.399.0386I sales@paradigmled.com `l�l• Project In an effort to continually improve our products.we reserve the right to change them without prior notice. Type Rev.7.42/19 AREA'E IVE 06/04/2021 SAGE COURT ADDITION PAGE 26 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES L2 PARADIGM LED ONEFLEX-45-30-20-24-* Channel mounted linear LED tape light for under vanity Remote driver lighting,4.5W/ft,3381m/ft,90+CRI,3000K,dimming TBD, required.Verify remote driver,24VDC. all lengths per Channel TBD plans.Verify all TBD options. •�) ParadigmLED RECOMMENDED CHANNELS QUICK SPEC GUIDE AMC-1407-S MATERIAL AMC-2111-R MATERIAL Anodized Aluminum Anodized Aluminum DESCRIPTION DESCRIPTION Slim and shallow surface channel. Slim and shallow recessed mount channel. LENGTH ' LENGTH 39",78" 1 _ 39".78" ur LENS TYPES •'j LENS TYPES 0.14 Q.,4 Clear=C Opal=O -(12.Innt1- Opal=O 034 I pinen) I ACCESSORIES ACCESSORIES Endcap AMC-1407-S-EC Endcap AMC-2111-R-EC Endcap w/hole AMC-14O7-S-ECL Endcap w/hole AMC-2111-R-ECL AMC-1616-C MATERIAL AMC-1999-M MATERIAL Anodized Aluminum Anodized Aluminum 19 DESCRIPTION DESCRIPTION Slim corner channel with rounded lens Mud in channel and lens LENGTH 1 LENGTH 39",78" 39".78" CC /AN ,r LENS TYPES LENS TYPES Clear=C 99 •V,. Opal=O Opal=O y r ACCESSORIES 16 1 -I ACCESSORIES Endcap AMC-1999-M-EC Endcap AMC-1616-C-EC Endcap w/hole AMC-1999-M-ECL Endcap w/hole AMC-1616-C-ECL Mounting Clip AMC-1616-C-MC • AMC-2020-S-R0 MATERIAL AMC-2020-S-SQ MATERIAL Anodized Aluminum Anodized Aluminum AI DESCRIPTION DESCRIPTION Slim and deep surface mounted channel Slim corner mount channel w/rounded lens LENGTH 39".78" LENGTH 39".78" LENS TYPES LENS SHAPE O LENS TYPES LENS SHAPE N Opal=O Round=RO 17. 1 CV Opal=O Square=SQ ACCESSORIES ACCESSORIES 19.4 Endcap AMC-2020-RO-EC 19.4 Endcap AMC-2020-SQ-EC Endcap w/hole AMC-2020-RO-ECL Endcap w/hole AMC-2020-SQ-ECL Mounting Clip AMC-2020-RO-MC Mounting AMC-2020-SQ-MC www.paradigmled.com 303.399.0386 I sales@paradigmled.com •.:e . Project In an effort to continually improve our products,we reserve the • �� Type right to change them without prior notice. Rev 7.4 2/19 AREC EIVE 06/04/2021 SAGE COURT ADDITION PAGE 27 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES L3 PARADIGM LED ONEFLEX-45-30-20-24-* Channel mounted linear LED tape light for closet lighting, Remote driver 4.5W/ft,3381m/ft,90+CRI,3000K,dimming TBD,remote required.Verify driver,24VDC. all lengths per Channel TBD plans.Verify all TBD options. ' . ParadigmLED ONEFLEX INDOOR SERIES - 14_________P_' epplW ILA rxv x __ 141 � +xV am+z{v +24v a 1+21v .1 M"kV N_ I I II_M M_�! - -✓�PamaigmLED- .J- ea) -.. -. C UL US LISTED ONEFLEX is a series of specification grade linear LED.It offers very tight LED spacing across multiple wattages and CRI of 90 or greater(80+CRI for 1800K&2200K).This product allows for uniform lighting in the smallest of channel profiles. SPECIFICATION + + + + + SERIES WATTAGE COLOR** IP RATING VOLTAGE LENGTH ONEFLEX 20=2.0 W/ft. 18=1800K 20=1P20 Indoor 24=24 VDC 5M=196 inches(5 meter)Reel 45=4.5 Vet. 22=2200K XX=Custom Length(inches) 60=6.0 Wit 80=8.0 W/ft. 30=3000K 35.3500K 40=4000K 50=5000K 65=6500K ELECTRICAL LUMEN OUTPUT Input Voltage 24VDC - INDOOR Dimming Options MLV,O-1OV,DMX,Lutron OneFIex20 2.OW/ftX85lum/W=170 lum/ft Power Consumption 2.0-8.0W/ft. OneFlex45 4.5W/ftX85lum/W=338lum/ft Wire Size 20AWG,2 Wire OneFIex60 6.OW/ftX85lum/W=510lum/ft Regulatory UL Listed file E468751 OneFlex80 8.OW/ftX85lum/W=664lum/ft Max Run Length per feed output+/-1 0% OneFlex 20 44'=(96W) OneFlex 45 22'=(96W) OneFlex 60 16'=(96W) PERFORMANCE OneFlex 80 12'=(96W) CRI 90+(80+CRI for 1800K&2200K) PHYSICAL Binning Tolerance +/-100K Warranty 5 years Field Cuttable Every1.0"(25.4mm) Operating Temperature -20°C(-40°F)to+50°C(+122°F) Environment IP20 Indoor Max Reel Length 16'4" DIMENSIONS DRAWINGS ONEFLEX 004 r B I I I Width 0.39"(1 O.Omm) o[ibeeueloemo+oomm oomo1 Height 0.07"(1.78mm) _ A Cuttable Segment Length 1.0"(25.4mm) Pitch Length 0.09"(2.29mm) oT A:0.39"(10.05mm) B:0.7"(1.78mm) www.paradigmled.com •. 303.399.0386 I sales@paradigmled.com .:1 . Project In an effort to continually improve our products.we reserve the • ��'° Type right to change them without prior notice. Rev 7.5 9/19 RECEIVED 06/04/2021 SAGE COURT ADDITION PAGE 28 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES L3 PARADIGM LED ONEFLEX-45-30-20-24-* Channel mounted linear LED tape light for closet lighting, Remote driver 4.5W/ft,3381m/ft,90+CRI,3000K,dimming TBD,remote required.Verify driver,24VDC. all lengths per Channel TBD plans.Verify all TBD options. • 0. 'aradigmLED RECOMMENDED CHANNELS QUICK SPEC GUIDE CH• , , PART NUMBER BREAKDOWN AMC-1707-S MATERIAL Anodized Aluminum + + + + DESCRIPTION SERIES DIMENSIONS APPLICATION LENS LENGTH Tf,�J ,��1�yTp Slim and shallow surface mount channel AMC=Alumi- XXXX=WxH(mm) S=Surface Mount C=Clear lens 1M=39 Inches C jl(���] j1 LENGTH nurn Mounting R=Recessed Channel O=Opal lens 2M=78 Inches Channel C=Corner Mount G=Grazer lens I E 39.78 M=Mud In Channel A Mounting Clip LENS TYPES Clear=C Opal=O Grazer=G A:0.68"(17.25mm) B:0.50"(12.59mm) C:0.34"(8.60mm) ACCESSORIES D:0.40"(12.70mm) Endcap AMC-1707-S-EC E:0.78"(19.90mm) Endcap whole AMC-1707-S-ECL Mounting Clip AMC-1707-S-MC AMC-1919-C MATERIAL AMC-1715-R MATERIAL Anodized Aluminum Anodized Aluminum C DESCRIPTION I I DESCRIPTION C Slim corner channel W Slim and deep recessed channel I 14 D ` LENGTH LENGTH 39",78" I D 39",78" Mounting Clip LENS TYPES t LENS TYPES Clear=C � A Clear=C opal=O Opal=O A:0.73"(18.50mm) Grazer-c B:0.48"(12.20mm) A:0.68"(17.25mm) C:0.73"(18.50mm) ACCESSORIES B:0.58"(14.75mm) ACCESSORIES D:0.82"(20.82mm) Endcap AMC-1919-C-EC C•0.98"(25.00mm) Endcap AMC-1715-R-EC E:0.82"(20.82mm) Endcapw/hole AMC-1919-C-ECL D 0.59"(15.05mm) Endcapw/hole AMC-1715-R-ECL Mounting Clip AMC-1919-C-MC " AMC-1715-S MATERIAL AMC-1707-R MATERIAL Anodized Aluminum Anodized Aluminum DESCRIPTION I C I DESCRIPTION I��I Slim and deep surface mounted channel Slim and shallow recessed channel C B ,ID 39".78" BL � D LENGTH �� LENGTH ` 39",78" 1 A 1 1-.-= 1 A Mounting Clip LENS TYPES LENS TYPES Clear=C Clear=C Opal=o Opal=O A:0.68"(17.25mm) Grazer=G Grazer-G A:0.68"(17.25mm) B:0.48"(12.30mm) B:0.50"(12.59mm) C:0.59"(15.05mm) ACCESSORIES ACCESSORIES C:0.98"(25.00mm) D:0.66"(16.76mm) Endcap AMC-1715-S-EC D:0.34"(8.60mm) Endcap AMC-1707-R-EC E0.78"(19.90mm) Endcap w/hole AMC-1715-S-ECL Endcap w/hole AMC-1707-R-ECL Mounting Clip AMC-1715-5-MC www.paradigmled.com •e 303.399.0386I sales@paradigmled.com :`l�l• Project In an effort to continually improve our products.we reserve the right to change them without prior notice. Type Rev.7.42/19 AREA'E IVE 06/04/2021 SAGE COURT ADDITION PAGE 29 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES L3 PARADIGM LED ONEFLEX-45-30-20-24-* Channel mounted linear LED tape light for closet lighting, Remote driver 4.5W/ft,3381m/ft,90+CRI,3000K,dimming TBD,remote required.Verify driver,24VDC. all lengths per Channel TBD plans.Verify all TBD options. •�) ParadigmLED RECOMMENDED CHANNELS QUICK SPEC GUIDE AMC-1407-S MATERIAL AMC-2111-R MATERIAL Anodized Aluminum Anodized Aluminum DESCRIPTION DESCRIPTION Slim and shallow surface channel. Slim and shallow recessed mount channel. LENGTH ' LENGTH 39",78" 1 _ 39".78" ur LENS TYPES •'j LENS TYPES 0.14 Q.,4 Clear=C Opal=O -p2.Innt1- Opal=O 034 I pM'"ril I ACCESSORIES ACCESSORIES Endcap AMC-1407-S-EC Endcap AMC-2111-R-EC Endcap w/hole AMC-14O7-S-ECL Endcap w/hole AMC-2111-R-ECL AMC-1616-C MATERIAL AMC-1999-M MATERIAL Anodized Aluminum Anodized Aluminum 19 DESCRIPTION DESCRIPTION Slim corner channel with rounded lens Mud in channel and lens LENGTH 1 LENGTH 39",78" 39".78" CC /AN ,r LENS TYPES LENS TYPES Clear=C 99 •V,. Opal=O Opal=O y r ACCESSORIES 16 1 -I ACCESSORIES Endcap AMC-1999-M-EC Endcap AMC-1616-C-EC Endcap w/hole AMC-1999-M-ECL Endcap w/hole AMC-1616-C-ECL Mounting Clip AMC-1616-C-MC • AMC-2020-S-PO MATERIAL AMC-2020-S-SQ MATERIAL Anodized Aluminum Anodized Aluminum AI DESCRIPTION DESCRIPTION Slim and deep surface mounted channel Slim corner mount channel w/rounded lens LENGTH 39".78" LENGTH 39".78" LENS TYPES LENS SHAPE O LENS TYPES LENS SHAPE N Opal=O Round=RO 17. 1 CV Opal=O Square=SQ ACCESSORIES ACCESSORIES 19.4 Endcap AMC-2020-RO-EC 19.4 Endcap AMC-2020-SQ-EC Endcap w/hole AMC-2020-RO-ECL Endcap w/hole AMC-2020-SQ-ECL Mounting Clip AMC-2020-RO-MC Mounting AMC-2020-SQ-MC www.paradigmled.com 303.399.0386 I sales@paradigmled.com ..:e . Project In an effort to continually improve our products,we reserve the • �� Type right to change them without prior notice. Rev 7.4 2/19 AREC EIVE 06/04/2021 SAGE COURT ADDITION PAGE 30 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES L4 PARADIGM LED ONEFLEX-45-30-20-24-* Channel mounted linear LED tape light for backlit mirror Remote driver lighting,4.5W/ft,3381m/ft,90+CRI,3000K,dimming TBD, required.Verify remote driver,24VDC. all lengths per Channel TBD plans.Verify all TBD options. ' . ParadigmLED ONEFLEX INDOOR SERIES - 14_________P_' epplW ILA rxv x __ 141 � +xV an+z{v +24v a 1+21v .1 M"ell if N_ I I II_M N_�! - -✓�PamaigmLED- .J- ea) -.. -. C UL US LISTED ONEFLEX is a series of specification grade linear LED.It offers very tight LED spacing across multiple wattages and CRI of 90 or greater(80+CRI for 1800K&2200K).This product allows for uniform lighting in the smallest of channel profiles. SPECIFICATION + + + + + SERIES WATTAGE COLOR** IP RATING VOLTAGE LENGTH ONEFLEX 20=2.0 W/ft. 18=1800K 20=1P20 Indoor 24=24 VDC 5M=196 inches(5 meter)Reel 45=4.5 Vet. 22=2200K XX=Custom Length(inches) 60=6.0 Wit 80=8.0 W/ft. 30=3000K 35.3500K 40=4000K 50=5000K 65=6500K ELECTRICAL LUMEN OUTPUT Input Voltage 24VDC - INDOOR Dimming Options MLV,O-1OV,DMX,Lutron OneFIex20 2.OW/ftX85lum/W=170 lum/ft Power Consumption 2.0-8.0W/ft. OneFlex45 4.5W/ftX85lum/W=338lum/ft Wire Size 20AWG,2 Wire OneFIex60 6.OW/ftX85lum/W=510lum/ft Regulatory UL Listed file E468751 OneFlex80 8.OW/ftX85lum/W=664lum/ft Max Run Length per feed output+/-1 0% OneFlex 20 44'=(96W) OneFlex 45 22'=(96W) OneFlex 60 16'=(96W) PERFORMANCE OneFlex 80 12'=(96W) CRI 90+(80+CRI for 1800K&2200K) PHYSICAL Binning Tolerance +/-100K Warranty 5 years Field Cuttable Every1.0"(25.4mm) Operating Temperature -20°C(-40°F)to+50°C(+122°F) Environment IP20 Indoor Max Reel Length 16'4" DIMENSIONS DRAWINGS ONEFLEX 004 r B I I I Width 0.39"(1 O.Omm) o[ibeeueloemo+oomm oom/ Height 0.07"(1.78mm) _ A Cuttable Segment Length 1.0"(25.4mm) Pitch Length 0.09"(2.29mm) oT A:0.39"(10.05mm) B:0.7"(1.78mm) www.paradigmled.com •. 303.399.0386 I sales@paradigmled.com .:1 . Project In an effort to continually improve our products.we reserve the • ��'•° Type right to change them without prior notice. Rev 7.5 9/19 RECEIVED 06/04/2021 SAGE COURT ADDITION PAGE 31 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES L4 PARADIGM LED ONEFLEX-45-30-20-24-* Channel mounted linear LED tape light for backlit mirror Remote driver lighting,4.5W/ft,3381m/ft,90+CRI,3000K,dimming TBD, required.Verify remote driver,24VDC. all lengths per Channel TBD plans.Verify all TBD options. • 0. 'aradigmLED RECOMMENDED CHANNELS QUICK SPEC GUIDE CH• , , PART NUMBER BREAKDOWN AMC-1707-S MATERIAL Anodized Aluminum + + + + DESCRIPTION SERIES DIMENSIONS APPLICATION LENS LENGTH Tf,�J ,��1�yTp Slim and shallow surface mount channel AMC=Alumi- XXXX=WuH(mm) S=Surface Mount C=Clear lens 1M=39 Inches C jl(���] j1 LENGTH nurn Mounting R=Recessed Channel O=Opal lens 2M=78 Inches Channel C=Corner Mount G=Grazer lens I E 39.78 M=Mud In Channel A Mounting Clip LENS TYPES Clear=C Opal=O Grazer=G A:0.68"(17.25mm) B:0.50"(12.59mm) C:0.34"(8.60mm) ACCESSORIES D:0.40"(12.70mm) Endcap AMC-1707-S-EC E:0.78"(19.90mm) Endcap whole AMC-1707-S-ECL Mounting Clip AMC-1707-S-MC AMC-1919-C MATERIAL AMC-1715-R MATERIAL Anodized Aluminum Anodized Aluminum C DESCRIPTION I I DESCRIPTION C Slim corner channel W Slim and deep recessed channel I 14 D ` LENGTH LENGTH 39",78" I D 39",78" Mounting Clip LENS TYPES t LENS TYPES Clear=C � A Clear=C opal=O Opal=O A:0.73"(18.50mm) Grazer-c B:0.48"(12.20mm) A:0.68"(17.25mm) C:0.73"(18.50mm) ACCESSORIES B:0.58"(14.75mm) ACCESSORIES D:0.82"(20.82mm) Endcap AMC-1919-C-EC C•0.98"(25.00mm) Endcap AMC-1715-R-EC E:0.82"(20.82mm) Endcapw/hole AMC-1919-C-ECL D 0.59"(15.05mm) Endcapw/hole AMC-1715-R-ECL Mounting Clip AMC-1919-C-MC " AMC-1715-S MATERIAL AMC-1707-R MATERIAL Anodized Aluminum Anodized Aluminum DESCRIPTION I C I DESCRIPTION I��I Slim and deep surface mounted channel Slim and shallow recessed channel C B ,ID 39".78" BL � D LENGTH �� LENGTH ` 39",78" 1 A 1 1-.-= 1 A Mounting Clip LENS TYPES LENS TYPES Clear=C Clear=C Opal=o Opal=O A:0.68"(17.25mm) Grazer=G Grazer-G A:0.68"(17.25mm) B:0.48"(12.30mm) B:0.50"(12.59mm) C:0.59"(15.05mm) ACCESSORIES ACCESSORIES C:0.98"(25.00mm) D:0.66"(16.76mm) Endcap AMC-1715-S-EC D:0.34"(8.60mm) Endcap AMC-1707-R-EC E0.78"(19.90mm) Endcap w/hole AMC-1715-S-ECL Endcap w/hole AMC-1707-R-ECL Mounting Clip AMC-1715-S-MC www.paradigmled.com •r 303.399.0386I sales@paradigmled.com `l�l• Project In an effort to continually improve our products.we reserve the right to change them without prior notice. Type Rev.7.42/19 AREA'E IVE 06/04/2021 SAGE COURT ADDITION PAGE 32 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES L4 PARADIGM LED ONEFLEX-45-30-20-24-* Channel mounted linear LED tape light for backlit mirror Remote driver lighting,4.5W/ft,3381m/ft,90+CRI,3000K,dimming TBD, required.Verify remote driver,24VDC. all lengths per Channel TBD plans.Verify all TBD options. •�) ParadigmLED RECOMMENDED CHANNELS QUICK SPEC GUIDE AMC-1407-S MATERIAL AMC-2111-R MATERIAL Anodized Aluminum Anodized Aluminum DESCRIPTION DESCRIPTION Slim and shallow surface channel. Slim and shallow recessed mount channel. LENGTH ' LENGTH 39",78" 1 _ 39".78" ur LENS TYPES •'j LENS TYPES 0.14 Q.,4 Clear=C Opal=O -(12.Innt1- Opal=O 034 I pinen) I ACCESSORIES ACCESSORIES Endcap AMC-1407-S-EC Endcap AMC-2111-R-EC Endcap w/hole AMC-14O7-S-ECL Endcap w/hole AMC-2111-R-ECL AMC-1616-C MATERIAL AMC-1999-M MATERIAL Anodized Aluminum Anodized Aluminum 19 DESCRIPTION DESCRIPTION Slim corner channel with rounded lens Mud in channel and lens LENGTH 1 LENGTH 39",78" 39".78" CC /AN ,r LENS TYPES LENS TYPES Clear=C 99 •V,. Opal=O Opal=O y r ACCESSORIES 16 1 -I ACCESSORIES Endcap AMC-1999-M-EC Endcap AMC-1616-C-EC Endcap w/hole AMC-1999-M-ECL Endcap w/hole AMC-1616-C-ECL Mounting Clip AMC-1616-C-MC • AMC-2020-S-R0 MATERIAL AMC-2020-S-SQ MATERIAL Anodized Aluminum Anodized Aluminum AI DESCRIPTION DESCRIPTION Slim and deep surface mounted channel Slim corner mount channel w/rounded lens LENGTH 39".78" LENGTH 39".78" LENS TYPES LENS SHAPE O LENS TYPES LENS SHAPE N Opal=O Round=RO 17. 1 CV Opal=O Square=SQ ACCESSORIES ACCESSORIES 19.4 Endcap AMC-2020-RO-EC 19.4 Endcap AMC-2020-SQ-EC Endcap w/hole AMC-2020-RO-ECL Endcap w/hole AMC-2020-SQ-ECL Mounting Clip AMC-2020-RO-MC Mounting AMC-2020-SQ-MC www.paradigmled.com 303.399.0386 I sales@paradigmled.com •.:e . Project In an effort to continually improve our products,we reserve the • �� Type right to change them without prior notice. Rev 7.4 2/19 AREC EIVE 06/04/2021 SAGE COURT ADDITION PAGE 33 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES L5 PARADIGM LED ONEFLEX-45-30-20-24-* Channel mounted linear LED tape light for fireplace reveal Remote driver lighting,4.5W/ft,3381m/ft,90+CRI,3000K,dimming TBD, required.Verify remote driver,24VDC. all lengths per Channel TBD plans.Verify all TBD options. ' . ParadigmLED ONEFLEX INDOOR SERIES - 14_________P_' epplW ILA rxv x __ 141 � +xV an+z{v +24v a 1+21v .1 M"ell if N_ I I II_M N_�! - -✓�PamaigmLED- .J- ea) -.. -. C UL US LISTED ONEFLEX is a series of specification grade linear LED.It offers very tight LED spacing across multiple wattages and CRI of 90 or greater(80+CRI for 1800K&2200K).This product allows for uniform lighting in the smallest of channel profiles. SPECIFICATION + + + + + SERIES WATTAGE COLOR** IP RATING VOLTAGE LENGTH ONEFLEX 20=2.0 W/ft. 18=1800K 20=1P20 Indoor 24=24 VDC 5M=196 inches(5 meter)Reel 45=4.5 Vet. 22=2200K XX=Custom Length(inches) 60=6.0 Wit 80=8.0 W/ft. 30=3000K 35.3500K 40=4000K 50=5000K 65=6500K ELECTRICAL LUMEN OUTPUT Input Voltage 24VDC - INDOOR Dimming Options MLV,O-1OV,DMX,Lutron OneFIex20 2.OW/ftX85lum/W=170 lum/ft Power Consumption 2.0-8.0W/ft. OneFlex45 4.5W/ftX85lum/W=338lum/ft Wire Size 20AWG,2 Wire OneFIex60 6.OW/ftX85lum/W=510lum/ft Regulatory UL Listed file E468751 OneFlex80 8.OW/ftX85lum/W=664lum/ft Max Run Length per feed output+/-1 0% OneFlex 20 44'=(96W) OneFlex 45 22'=(96W) OneFlex 60 16'=(96W) PERFORMANCE OneFlex 80 12'=(96W) CRI 90+(80+CRI for 1800K&2200K) PHYSICAL Binning Tolerance +/-100K Warranty 5 years Field Cuttable Every1.0"(25.4mm) Operating Temperature -20°C(-40°F)to+50°C(+122°F) Environment IP20 Indoor Max Reel Length 16'4" DIMENSIONS DRAWINGS ONEFLEX 004 r B I I I Width 0.39"(1 O.Omm) o[ibeeueloemo+oomm oom/ Height 0.07"(1.78mm) _ A Cuttable Segment Length 1.0"(25.4mm) Pitch Length 0.09"(2.29mm) oT A:0.39"(10.05mm) B:0.7"(1.78mm) www.paradigmled.com •. 303.399.0386 I sales@paradigmled.com .:1 . Project In an effort to continually improve our products.we reserve the • ��'•° Type right to change them without prior notice. Rev 7.5 9/19 RECEIVED 06/04/2021 SAGE COURT ADDITION PAGE 34 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES L5 PARADIGM LED ONEFLEX-45-30-20-24-* Channel mounted linear LED tape light for fireplace reveal Remote driver lighting,4.5W/ft,3381m/ft,90+CRI,3000K,dimming TBD, required.Verify remote driver,24VDC. all lengths per Channel TBD plans.Verify all TBD options. • 0. 'aradigmLED RECOMMENDED CHANNELS QUICK SPEC GUIDE CH• , , PART NUMBER BREAKDOWN AMC-1707-S MATERIAL Anodized Aluminum + + + + DESCRIPTION SERIES DIMENSIONS APPLICATION LENS LENGTH Tf,�J ,��1�yTp Slim and shallow surface mount channel AMC=Alumi- XXXX=WuH(mm) S=Surface Mount C=Clear lens 1M=39 Inches C jl(���] j1 LENGTH nurn Mounting R=Recessed Channel O=Opal lens 2M=78 Inches Channel C=Corner Mount G=Grazer lens I E 39.78 M=Mud In Channel A Mounting Clip LENS TYPES Clear=C Opal=O Grazer=G A:0.68"(17.25mm) B:0.50"(12.59mm) C:0.34"(8.60mm) ACCESSORIES D:0.40"(12.70mm) Endcap AMC-1707-S-EC E 0.78"(19.90mm) Endcap whole AMC-1707-S-ECL Mounting Clip AMC-1707-S-MC AMC-1919-C MATERIAL AMC-1715-R MATERIAL Anodized Aluminum Anodized Aluminum C DESCRIPTION I I DESCRIPTION C Slim corner channel W Slim and deep recessed channel I 14 D ` LENGTH LENGTH 39",78" I D 39",78" Mounting Clip LENS TYPES t LENS TYPES Clear=C � A Clear=C opal=O Opal=O A:0.73"(18.50mm) Grazer-c B:0.48"(12.20mm) A:0.68"(17.25mm) C:0.73"(18.50mm) ACCESSORIES B:0.58"(14.75mm) ACCESSORIES D:0.82"(20.82mm) Endcap AMC-1919-C-EC C•0.98"(25.00mm) Endcap AMC-1715-R-EC E:0.82"(20.82mm) Endcapw/hole AMC-1919-C-ECL D 0.59"(15.05mm) Endcapw/hole AMC-1715-R-ECL Mounting Clip AMC-1919-C-MC " AMC-1715-S MATERIAL AMC-1707-R MATERIAL Anodized Aluminum Anodized Aluminum DESCRIPTION I C I DESCRIPTION I��I Slim and deep surface mounted channel Slim and shallow recessed channel C B ,ID 39".78" BL � D LENGTH �� LENGTH ` 39",78" 1 A 1 1-.-= 1 A Mounting Clip LENS TYPES LENS TYPES Clear=C Clear=C Opal=o Opal=O A:0.68"(17.25mm) Grazer=G Grazer-G A:0.68"(17.25mm) B:0.48"(12.30mm) B:0.50"(12.59mm) C:0.59"(15.05mm) ACCESSORIES ACCESSORIES C:0.98"(25.00mm) D:0.66"(16.76mm) Endcap AMC-1715-S-EC D:0.34"(8.60mm) Endcap AMC-1707-R-EC E:0.78"(19.90mm) Endcap w/hole AMC-1715-S-ECL Endcap w/hole AMC-1707-R-ECL Mounting Clip AMC-1715-S-MC • • www.paradigmled.com •r 303.399.0386I sales@paradigmled.com `l�l• Project In an effort to continually improve our products.we reserve the right to change them without prior notice. Type Rev.7.42/19 AREA'E IVE 06/04/2021 SAGE COURT ADDITION PAGE 35 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES L5 PARADIGM LED ONEFLEX-45-30-20-24-* Channel mounted linear LED tape light for fireplace reveal Remote driver lighting,4.5W/ft,3381m/ft,90+CRI,3000K,dimming TBD, required.Verify remote driver,24VDC. all lengths per Channel TBD plans.Verify all TBD options. •�) ParadigmLED RECOMMENDED CHANNELS QUICK SPEC GUIDE AMC-1407-S MATERIAL AMC-2111-R MATERIAL Anodized Aluminum Anodized Aluminum DESCRIPTION DESCRIPTION Slim and shallow surface channel. Slim and shallow recessed mount channel. LENGTH ' LENGTH 39",78" 1 _ 39".78" ur LENS TYPES •'j LENS TYPES 0.14 Q.,4 Clear=C Opal=O -(12.Innt1- Opal=O 034 I pinen) I ACCESSORIES ACCESSORIES Endcap AMC-1407-S-EC Endcap AMC-2111-R-EC Endcap w/hole AMC-14O7-S-ECL Endcap w/hole AMC-2111-R-ECL AMC-1616-C MATERIAL AMC-1999-M MATERIAL Anodized Aluminum Anodized Aluminum 19 DESCRIPTION DESCRIPTION Slim corner channel with rounded lens Mud in channel and lens LENGTH 1 LENGTH 39",78" 39".78" CC /AN ,r LENS TYPES LENS TYPES Clear=C 99 •V,. Opal=O Opal=O y r ACCESSORIES 16 1 -I ACCESSORIES Endcap AMC-1999-M-EC Endcap AMC-1616-C-EC Endcap w/hole AMC-1999-M-ECL Endcap w/hole AMC-1616-C-ECL Mounting Clip AMC-1616-C-MC • AMC-2020-S-R0 MATERIAL AMC-2020-S-SQ MATERIAL Anodized Aluminum Anodized Aluminum AI DESCRIPTION DESCRIPTION Slim and deep surface mounted channel Slim corner mount channel w/rounded lens LENGTH 39".78" LENGTH 39".78" LENS TYPES LENS SHAPE O LENS TYPES LENS SHAPE N Opal=O Round=RO 17. 1 CV Opal=O Square=SQ ACCESSORIES ACCESSORIES 19.4 Endcap AMC-2020-RO-EC 19.4 Endcap AMC-2020-SQ-EC Endcap w/hole AMC-2020-RO-ECL Endcap w/hole AMC-2020-SQ-ECL Mounting Clip AMC-2020-RO-MC Mounting AMC-2020-SQ-MC www.paradigmled.com 303.399.0386 I sales@paradigmled.com •.:e . Project In an effort to continually improve our products,we reserve the • �� Type right to change them without prior notice. Rev 7.4 2/19 AREC EIVE 06/04/2021 SAGE COURT ADDITION PAGE 36 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES L6 PARADIGM LED ONEFLEX-80-30-20-24-* Channel mounted linear LED tape light for linear reveal Remote driver lighting,8.0W/ft,6641m/ft,90+CRI,3000K,dimming TBD, required.Verify remote driver,24VDC. all lengths per Channel TBD plans.Verify all TBD options. ' . ParadigmLED ONEFLEX INDOOR SERIES to rxv - • 1 Ilk+xv an+zav +zav�,''-.J+zw iz M"a if N_ I I II_M N_�! - -✓�PamaigmLED- .J- ea) -.. -. C UL US LISTED ONEFLEX is a series of specification grade linear LED.It offers very tight LED spacing across multiple wattages and CRI of 90 or greater(80+CRI for 1800K&2200K).This product allows for uniform lighting in the smallest of channel profiles. SPECIFICATION + + + + + SERIES WATTAGE COLOR** IP RATING VOLTAGE LENGTH ONEFLEX 20=2.0 W/ft. 18=1800K 20=1P20 Indoor 24=24 VDC 5M=196 inches(5 meter)Reel 45=4.5 Vet. 22=2200K XX=Custom Length(inches) 60=6.0 Wit 80=8.0 W/ft. 30=3000K 35.3500K 40=4000K 50=5000K 65=6500K ELECTRICAL LUMEN OUTPUT Input Voltage 24VDC - INDOOR Dimming Options MLV,O-1OV,DMX,Lutron OneFIex20 2.OW/ftX85lum/W=170 lum/ft Power Consumption 2.0-8.0W/ft. OneFlex45 4.5W/ftX85lum/W=338lum/ft Wire Size 20AWG,2 Wire OneFIex60 6.OW/ftX85lum/W=510lum/ft Regulatory UL Listed file E468751 OneFlex80 8.OW/ftX85lum/W=664lum/ft Max Run Length per feed output+/-1 0% OneFlex 20 44'=(96W) OneFlex 45 22'=(96W) OneFlex 60 16'=(96W) PERFORMANCE OneFlex 80 12'=(96W) CRI 90+(80+CRI for 1800K&2200K) PHYSICAL Binning Tolerance +/-100K Warranty 5 years Field Cuttable Every1.0"(25.4mm) Operating Temperature -20°C(-40°F)to+50°C(+122°F) Environment IP20 Indoor Max Reel Length 16'4" DIMENSIONS DRAWINGS ONEFLEX 004 r B I I I Width 0.39"(1 O.Omm) o[ibeeueloemo+oomm oom/ Height 0.07"(1.78mm) _ A Cuttable Segment Length 1.0"(25.4mm) Pitch Length 0.09"(2.29mm) oT A:0.39"(10.05mm) B:0.7"(1.78mm) www.paradigmled.com • •. 303.399.0386 I sales@paradigmled.com .:1 . Project In an effort to continually improve our products.we reserve the • ��••° Type right to change them without prior notice. Rev 7.5 9/19 RECEIVED 06/04/2021 SAGE COURT ADDITION PAGE 37 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES L6 PARADIGM LED ONEFLEX-80-30-20-24-* Channel mounted linear LED tape light for linear reveal Remote driver lighting,8.0W/ft,6641m/ft,90+CRI,3000K,dimming TBD, required.Verify remote driver,24VDC. all lengths per Channel TBD plans.Verify all TBD options. • 0. 'aradigmLED RECOMMENDED CHANNELS QUICK SPEC GUIDE CH• , , PART NUMBER BREAKDOWN AMC-1707-S MATERIAL Anodized Aluminum + + + + DESCRIPTION SERIES DIMENSIONS APPLICATION LENS LENGTH Tf,�J ,��1�yTp Slim and shallow surface mount channel AMC=Alumi- XXXX=WuH(mm) S=Surface Mount C=Clear lens 1M=39 Inches C jl(���] j1 LENGTH nurn Mounting R=Recessed Channel O=Opal lens 2M=78 Inches Channel C=Corner Mount G=Grazer lens I E 39.78 M=Mud In Channel A Mounting Clip LENS TYPES Clear=C Opal=O Grazer=G A:0.68"(17.25mm) II:0.50"(12.59mm) C:0.34"(8.60mm) ACCESSORIES D:0.40"(12.70mm) Endcap AMC-1707-S-EC E:0.78"(19.90mm) Endcap whole AMC-1707-S-ECL Mounting Clip AMC-1707-S-MC AMC-1919-C MATERIAL AMC-1715-R MATERIAL Anodized Aluminum Anodized Aluminum C DESCRIPTION I I DESCRIPTION C Slim corner channel W Slim and deep recessed channel I 14 D ` LENGTH LENGTH 39",78" I D 39",78" Mounting Clip LENS TYPES t LENS TYPES Clear=C � A Clear=C opal=O Opal=O A:0.73"(18.50mm) Grazer-c B:0.48"(12.20mm) A:0.68"(17.25mm) C:0.73"(18.50mm) ACCESSORIES B:0.58"(14.75mm) ACCESSORIES D:0.82"(20.82mm) Endcap AMC-1919-C-EC C•0.98"(25.00mm) Endcap AMC-1715-R-EC E:0.82"(20.82mm) Endcapw/hole AMC-1919-C-ECL D 0.59"(15.05mm) Endcapw/hole AMC-1715-R-ECL Mounting Clip AMC-1919-C-MC " AMC-1715-S MATERIAL AMC-1707-R MATERIAL Anodized Aluminum Anodized Aluminum DESCRIPTION I C I DESCRIPTION I��I Slim and deep surface mounted channel Slim and shallow recessed channel C B ,ID 39".78" BL � D LENGTH �� LENGTH ` 39",78" 1 A 1 1-.-= 1 A Mounting Clip LENS TYPES LENS TYPES Clear=C Clear=C Opal=O Opal=O A:0.68"(17.25mm) Grazer=G Grazer-G A:0.68"(17.25mm) B:0.48"(12.30mm) B:0.50"(12.59mm) C:0.59"(15.05mm) ACCESSORIES ACCESSORIES C:0.98"(25.00mm) D:0.66"(16.76mm) Endcap AMC-1715-S-EC D:0.34"(8.60mm) Endcap AMC-1707-R-EC E0.78"(19.90mm) Endcap w/hole AMC-1715-S-ECL Endcap w/hole AMC-1707-R-ECL Mounting Clip AMC-1715-5-MC • • www.paradigmled.com •r 303.399.0386I sales@paradigmled.com `l�l• Project In an effort to continually improve our products.we reserve the right to change them without prior notice. Type Rev.7.42/19 AREA'E IVE 06/04/2021 SAGE COURT ADDITION PAGE 38 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES L6 PARADIGM LED ONEFLEX-80-30-20-24-* Channel mounted linear LED tape light for linear reveal Remote driver lighting,8.0W/ft,6641m/ft,90+CRI,3000K,dimming TBD, required.Verify remote driver,24VDC. all lengths per Channel TBD plans.Verify all TBD options. •�) ParadigmLED RECOMMENDED CHANNELS QUICK SPEC GUIDE AMC-1407-S MATERIAL AMC-2111-R MATERIAL Anodized Aluminum Anodized Aluminum DESCRIPTION DESCRIPTION Slim and shallow surface channel. Slim and shallow recessed mount channel. LENGTH ' LENGTH 39",78" 1 _ 39".78" ur LENS TYPES •'j LENS TYPES 0.14 Q.,4 Clear=C Opal=O -(12.Innt1- Opal=O 034 I pinen) I ACCESSORIES ACCESSORIES Endcap AMC-1407-S-EC Endcap AMC-2111-R-EC Endcap w/hole AMC-14O7-S-ECL Endcap w/hole AMC-2111-R-ECL AMC-1616-C MATERIAL AMC-1999-M MATERIAL Anodized Aluminum Anodized Aluminum 19 DESCRIPTION DESCRIPTION Slim corner channel with rounded lens Mud in channel and lens LENGTH 1 LENGTH 39",78" 39".78" CC /AN ,r LENS TYPES LENS TYPES Clear=C 99 •V,. Opal=O Opal=O y r ACCESSORIES 16 1 -I ACCESSORIES Endcap AMC-1999-M-EC Endcap AMC-1616-C-EC Endcap w/hole AMC-1999-M-ECL Endcap w/hole AMC-1616-C-ECL Mounting Clip AMC-1616-C-MC • AMC-2020-S-R0 MATERIAL AMC-2020-S-SQ MATERIAL Anodized Aluminum Anodized Aluminum AI DESCRIPTION DESCRIPTION Slim and deep surface mounted channel Slim corner mount channel w/rounded lens LENGTH 39".78" LENGTH 39".78" LENS TYPES LENS SHAPE O LENS TYPES LENS SHAPE N Opal=O Round=RO 17. 1 CV Opal=O Square=SQ ACCESSORIES ACCESSORIES 19.4 Endcap AMC-2020-RO-EC 19.4 Endcap AMC-2020-SQ-EC Endcap w/hole AMC-2020-RO-ECL Endcap w/hole AMC-2020-SQ-ECL Mounting Clip AMC-2020-RO-MC Mounting AMC-2020-SQ-MC www.paradigmled.com 303.399.0386 I sales@paradigmled.com •.':e - Project In an effort to continually improve our products,we reserve the • ��� Type right to change them without prior notice. Rev 7.4 2/19 AREC EIVE 06/04/2021 SAGE COURT ADDITION PAGE 39 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES M1-4 CREE LIGHTING LS4-25L-MOD30K-10V-* Surface mounted 4'long linear LED striplight,25W,25001m, Verify all TBD 90+CRI, MOD 3000K,0-10V dimming,120V. options. LS Series LS4TM LED Surface Ambient Luminaire-4' Rev.Date:V13 07/21/2020 Product Description The LS4TM surface ambient luminaire delivers up to 109 lumens per watt of Cree TrueWhite® ` Technology 90+CRI illumination.The 4'11219mm)luminaire is available with up to 5,000 lumens in 3500K,4000K and 5000K color temperatures.The LS Series features sleek and compact architectural design with flexible lumen packages,color temperatures and standard 0-10V dimming.Flexible - mounting of the LS Series allows for individual mount or continuous row applications for surface 11111141441111*44-'- mount,suspended mount,pendant mount and cove installations. Applications:Surface and suspended ambient applications for new construction and upgrade Performance Summary Utilizes Cree TrueWhite®Technology A Initial Delivered Lumens:2,500-5,000 lumens Input Power:23-50 watts Efficacy:Up to 109 LPW CRI:90+CRI CCT:3500K,4000K,5000K Input Voltage:120-277,347 VAC L,0 Lifetime:>100,000 hours at 35'C Limited Warranty':10 years on luminaire/1 year on accessories Limited Warranty Emergency Back Up(EB)Battery:1 Year on Battery Back Up.Test regularly in accordance with local codes Dimensions:L 48.0"(1219mm)x W 2.5"164mm)x H 3.0"(77mm) 48.0" Weight:5 lbs.(2.3kg) 11219mm) Dimming:0-10V dimming to 5 'See http://creelighting.com/warranty for warranty terms Reflectors&Accessories Field-Installed End Caps Non-Power Feed Adjustable Cable Support for T-Bar Ceilings, Power Feed Adjustable LS-EC[pair) AC5-48-014B-TB Cable Support for T-Bar& -For individual AC5-48-014B-TB-50BULK(Pack of 501 Hard Ceilings, mounting,order one -Includes 5.0"1127mm)Canopy,48.0'11219mm)Adjustable Cable, AC5-12/3-48-014B-JB LS-EC per luminaire 014E Gripper and T-Bar Clip -Non-dimmin lications -For continuous row AC2-48-014B-TB 9127 mml mounting.order one AC2-48-014B-TB-50BULK(Pack of 50) -Includes Ca op"(40" LS-EC per row -Same as above except with 2"151mml Canopy CableCanopy, 112 B Grip#12/3an SJT Cord, Joint Aligner Non-Power Feed Adjustable Loop Cable for Unfinished Ceilings, 014E Gripper and J-Box LS-RJ AC-144-0148-LP Strap -Top housing aligner AC-144-014B-LP-50BULK(Pack of501 AC5-18/5-48-014B-JB for continuous rows -Includes 144.0"1366cmI L x1/16"(2mml Diameter Adjustable -Dimming applications LS-RFLJ Galvanized Loop Cable w/014B Gripper -Includes 5.0"1127mm) V -Reflector aligner for Non-Power Feed Adjustable Cable Support for Hard Ceilings, Cable Canopy,48.0" continuous row AC5-48-014B-JB (1219mm)#18/5 SJT Cord, Reflectors -Includes 5.0"1127mm)Canopy,48.0"I1219mm)Adjustable Cable, 014B Gripper and J-Box -Refer to reflector 0148 Gripper and J-Box Strap Strap spec sheet Continuous Row Through Wiring Kit, AC5-18/2-48-014B-JB Solid LS4TWK -For use with AC5-12/3- �� LS4-SR -Includes 131#12AWG 54.0"I1372mm)Wires for Line(black), 48-0140-J8 for selective 3.0" ICI -Pair of reflectors Neutral[white),Ground[green),121#18AWG 54.0"(1372mm) luminaire dimming control (77mm) >I -<0.5%Uptight Wires for 0-10V dimming(purple,gray)and(101 Wire Nuts in row mounted luminaires 2'S ADertured -Optionalaccessoryforusewhenluminaireisnotorderedwith -Includes5.0"1127mm) (64mm) LS4-AR factory installed TW option Cable Canopy,48.0" -Pair of reflectors -Does not power luminaires w/EB14 option.Additional unswitched (1219mm)#18/2 5VT Cord, -—6.5%Uptight (i.e.continuous power)dedicated feeds(by others)must be 014B Gripper and J-Box supplied to EB14 Strap ,Refer to the CS&LS Accessory spec sheet for more details Ordering Information Example:LS4-40L-35K-10V LS4 10V Product Lumen Package CCT Voltage Control Options L54 25L 35K Blank 101/ EB14Emergency Backup TW Through Wire Option 2,500 Lumens 3500K 120-277 Volt 0-10V dimming to5% -Minimum 90 minutes -Factory installed 4111. 40K 34 -1,400 lumens -Includes quick connects for use in 4,000 lumens 4000K 347 Volt -Minimum operating temperature: continuous row applications 501- 50K -Available with 40L 0'C(32'Fl -Not for use with 25L,347V or EB14 option 5,000 lumens 5000K only -Not available with 347 voltage • CRE® Lte cos • TECHNOLOGY CREE = LIGHTIN US:creelighting.com(800)236-6800 ��� ��� Canada:creelighting-canada.com(800)473-1234 F, r) 06/04/2021 SAGE COURT ADDITION PAGE 40 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES M1-4 CREE LIGHTING LS4-25L-MOD30K-10V-* Surface mounted 4'long linear LED striplight,25W,25001m, Verify all TBD 90+CRI, MOD 3000K,0-10V dimming,120V. options. LS Series Surface Ambient Luminaire-4' Product Specifications Photometry CREE TRUEWHITE®TECHNOLOGY LS4-40L-40K-10V BASED ON CESTL REPORT TEST it:PL10232-001A A revolutionary way to generate high-quality white light,Cree TrueWhite® Luminaire photometry has been conducted in accordance with IES LM-79-08.IES LM-79-08 Technology is a patented approach that delivers an exclusive combination specifies the entire luminaire as the source resulting in a luminaire efficiency of 100%. of 90+CRI,beautiful light characteristics and lifelong color consistency,all while maintaining high luminous efficacy-a true no compromise solution. CONSTRUCTION&MATERIALS I Coefficients Of Utilization- • Constructed of durable 22 gauge steel AI o 90° Zonal Cavity Method • Acrylic lens delivers a low-glare,diffused light distribution plivimir RC%: eo • TICALPrepainted white for enhanced smooth finish 287 11` �` RW%: 70 50 30 10 70° OPTICAL SYSTEM RCR:0 116 116 116 116 • Unique combination of reflective and refractive optical components -achieves a uniform,comfortable appearance while eliminating pixelation 573 1 104 98 93 88 and color fringing 2 94 84 76 70 • Components work together to optimize distribution,balancing the4 50° delivery of high illuminance levels on horizontal surfaces with an ideal 860litill* 6 3 85 73 64 57 amount of light on walls and vertical surfaces.This increases the , perception of spaciousness 4 77 65 55 46 • -11%Uptight 1147 ' 5 71 57 48 41 ELECTRICAL SYSTEM 0° 20° 6 65 51 42 35 • Power Factor:>0.9 0° -90° - 7 61 47 37 31 • Input Power:Stays constant over life • Input Voltage:120-277 or 347 VAC,60Hz 8 56 42 34 28 • Operating Temperature Range:-28°C-+35°CI-18.4°F-+95°FI; Average Luminance Table lcd/ma) 9 53 39 30 25 minimum operating temperature with EB14 option is 0°C(32°FI 10 49 36 28 22 • Total Harmonic Distortion:<20%for 120-277V Horizontal Angle 0° 45° 90° Effective Floor Cavity Reflectance:20% CONTROLS it • Continuous dimming to 5%with 0-10V DC control protocol a+ 45° 11,719 10,566 10,876 a` - Zonal Lumen Summary • 10V Source Current:0.25mA m 55' 10.699 9.696 10,257 • Use only lighting controls with neutral connection or controls intended f 65° 9,542 8,925 9,694 Zone Lumens %Lamp Luminaire for use with LED fixtures > 0-30 882 N/A 20.6% • Reference www.creelink.com/exLink.asp?70982140Z58R34126620963 75° 7,966 8,285 9,171 for recommended dimming controls and wiring diagrams 85° 5,636 7,998 8,922 0-40 1,453 N/A 33.9% REGULATORY&VOLUNTARY QUALIFICATIONS 0-60 2,640 N/A 61.6% • cULus Listed 0-90 3,823 N/A 89.2% • Suitable for damp locations 0-180 4,285 N/A 100% • Suitable for continuous row mounting Reference http://creelighting.com/nroducts /surface-ambientAs-series for detailed photometric data • Designed for indoor use only • Not intended for use in environments containing airborne corrosive agents such as chemical solvents,cleaners,or cutting fluids • Ingress Protection:IP20 • UL924 IEB option).Maximum mounting height:10.0'I3.0m) LS Series Ambient Adjusted Lumen Maintenance' • EB14 option meets CA Title 20 Appliance Regulations 1 25K hr 50K hr 75K hr 100K hr Initial • RoHS compliant.Consult factory for additional details Ambient LMF Reported' Estimated' Estimated' Estimated' • Meets FCC Part 15,Subpart B,Class A limits for conducted and LMF LMF LMF LMF radiated emissions O'C 132'FI 1.04 1.04 1.04 1.04 1.04 • DLC qualified.Please refer to https://www.designlights.org/search/for most current information 5°C 141°FI 1.03 1.03 1.03 1.03 1.03 •®CA RESIDENTS WARNING:Cancer and Reproductive Harm- 10°C 150°FI 1.02 1.02 1.02 1.02 1.02 www.p 65wa r u i n g s.ca.g ov 15°C 159°FI 1.02 1.02 1.02 1.02 1.02 Electrical Data* 20°C 168°FI 1.01 1.01 1.01 1.01 1.01 Initial System Watts Efficacy Total Current IA) 25°C 177°FI 1.00 1.00 1.00 1.00 1.00 Lumen CCT Delivered ILPW fd Package Lumens"120-277V 347V 120-277VI 120V 208V 240V 277V 347V 30°C 186°FI 0.99 0.99 0.99 0.99 0.99 25L All 23 23 109 0.20 0.12 0.11 0.09 N/A 35°C 195°FI 0.98 0.98 0.98 0.98 0.98 25L w/ 2,500 'Lumen maintenance values at 25°C 177°F1 are calculated per IES TM-21 based on IES LM-80 report data for the LED EB14 All 27 27 93 0.23 0.14 0.13 0.11 N/A package and in-situ luminaire testing.Luminaire ambient temperature factors(LAW)have been applied to all lumen maintenance factors. 40L All 44 44 91 0.37 0.22 0.19 0.17 0.13accordance with 1E5 TM-21,Reported values represent interpolated values based on time durations that are up to 6x the tested duration In the IES LM-80 report for the LED. 40L w/ 4,000 'Estimated values are calculated and represent time durations that exceed the 6x test duration of the LED. EB14 All 48 N/A 83 0.40 0.26 0.22 0.19 N/A 50L All 50 N/A 100 0.44 0.25 0.22 0.19 N/A 5 w/ 5,000 EB140L All 55 N/A 91 0.47 0.28 0.24 0.21 N/A •Electrical data at 25'C 177°FI.Actual wattage may differ by+1 o%/-15%when operating between 120-277V or 347V 4-10% "'Initial delivered lumens at 25°C 177'FI.Actual production yield may vary between-10 and+10%of initial delivered lumens ©2020 Cree Lighting,A company of IDEAL INDUSTRIES.ALL rights reserved.For informational purposes only. Content is subject to change.Patent www.creelighting.com/patents.Crecy,the Cree Logo,TrueWhitde,Cree TrueWhite®,and the Cree TrueWhite Technology Logo are registered trademarks of Cree,Inc.LS4r"is a trademark of Cree Lighting,A company of IDEAL INDUSTRIES.The UL Logo is a registered trademark of UL LLC.The DLC DPL Logo CREE LIGHTING 0 la U a registered trademark of Efficiency Forward.Inc. �.: A lIFE US:creelighting.com 1800)236-6800 ■(♦ Canada:creelighting-canada.com(80 01 473-1234 L-e' 06/04/2021 SAGE COURT ADDITION PAGE 41 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES M1-8 CREE LIGHTING LS8-80L-MOD30K-10V-* Surface mounted 8'long linear LED striplight,88W,80001m, Verify all TBD 90+CRI, MOD 3000K,0-10V dimming,120V. options. LS Series LS8TM LED Surface Ambient Luminaire—8' Rev.Date:V13 07/21/2020 Product Description The LS8Tu surface ambient luminaire delivers 100 lumens per watt of Cree TrueWhitee Technology 90* CRI illumination.The 8'(2438mm)luminaire is available with up to 10,000 lumens in 3500K,4000K and 5000K color temperatures.The LS Series features sleek and compact architectural design with flexible '••••. lumen packages,color temperatures and standard 0-10V dimming.Flexible mounting of the LS Series allows for individual mount or continuous row applications for surface mount,suspended mount, pendant mount and cove installations. - Applications:Surface and suspended ambient applications for new construction and upgrade Performance Summary Utilizes Cree TrueWhitee Technology A Initial Delivered Lumens:8,000-10,000 lumens Input Power:88 or 110 watts Efficacy:Up to 100 LPW CR1:90+CRI CCT:3500K,4000K,5000K Input Voltage:120-277,347 VAC L,0 Lifetime:>100,000 hours at 35°C Limited Warranty':10 years on luminaire/1 year on accessories Limited Warranty Emergency Back Up(EBI Battery:1 Year on Battery Back Up.Test regularly in accordance with local codes Dimensions:L 96.0"12438mm)x W 2.5"(64mm)x H 3.0"(77mm) 96.0" Weight:10 lbs.(4.5kg) (2438mm) Dimming:0-10V dimming to 5% `See httpJ/creehghting.com/warranty for warranty terms Reflectors&Accessories Field-installed End Caps Non-Power Feed Adjustable Cable Support for T-Bar Ceilings* Power Feed w/Adjustable LS-EC(pair) AC5-48-014B-TB Cable Support for T-Bar& -For individual AC5-48-014B-TB-50BULK(Pack of 50) Hard Ceilings* punting,order one -Includes 5.0"1127mm)Canopy,48.0"(1219mm) 405-12/3-48-014B-JB LS-EC per luminaire Adjustable Cable,014E Gripper and T-Bar Clip -Non-dimming applications -For continuous row AC2-48-014B-TB -Includes 5.0"(127mm)Cable punting,order one AC2-48-014B-TB-50BULK(Pack of 501 Canopy,48"11219mml#12/3 LS-EC per row -Same as above except with 2"(51 mm)Canopy SJT Cord,014E Gripper and Joint Aligner Non-Power Feed Adjustable Loop Cable for Unfinished Ceilings* J-Box Strap LS-RJ AC-144-014E-LP AC5-18/5-48-014B-JB -Top housing aligner AC-144-014B-LP-50BULK(Pack of 50) -Dimming applications for continuous rows -Includes 144.0"(366cm1 L x 1/16"12mm1 Diameter Adjustable -Includes 5.0"(127mml Cable + L LS-RFLJ Galvanized Loop Cable w/014B Gripper Canopy,48.0"11219mm] -Reflector aligner for Non-Power Feed Adjustable Cable Support for Hard Ceilings* #18/5 SJT Cord,014B continuous row AC5-48-014B-JB Gripper and J-Box Strap Reflectors -Includes 5.0"1127mm1 Canopy,48.0"(1219mm)Adjustable Cable, i ('\ AC5-18/2-48-014B-JB -Refer to reflector 014B Gripper and J-Box Strap -For use with AC5-12/3- I spec sheet Continuous Row Through Wiring Kit* 48-014B-JB for selective �� Solid LSBTWK luminaire dimming control in 3.0" LS8-SR -Includes 131#12AWG 54.0"11372mm1 Wires for Line(black), row mounted luminaires (77mm) -Pair of reflectors Neutral(white(,Ground(green),(2)#18AWG 54.0"11372mm) -Includes 5.0"1127mm1 Cable 2.5 -<0.5%Uptight Wires for 0-10V dimming(purple.gray)and 1101 Wire Nuts Canopy,48.0"(1219mm] (64mm) Apertured -Optional accessory for use when luminaire is not ordered with #18/2 SVl Cord,014B LS8-AR factory installed TW option Gripper and 1-Box Strap -Pair of reflectors -Does not power luminaires w/EB14 option.Additional unswitched -—6.5%Uplight (i.e.continuous power)dedicated feeds(by others)must be supplied to EB14 *Refer to the CS&LS Accessory spec sheet for more details Ordering Information Example:LS8-80L-35K-10V LS8 10V Product Lumen Package CCT Voltage Control Options LS8 80L 35K Blank 10V EB14 Emergency Backup TW Through Wire Option 8,000 lumens 3500K 120-277 Volt 0-10V dimming to 5% -Minimum 90 minutes -Factory installed 100L 40K 34 -1,400 lumens -Includes quick connects for use in 10,000 lumens 4000K 347 Volt -Minimum operating temperature: continuous row applications 50K -Available with 80L only 0°C 132°F) -Not for use with 347V or EB14 option 5000K -Not available in 347 voltage CRE® sous CREE = LIGHTIN �// riTECHNOLOGY C cghNng tins (8001236-618 0 I V E Canada:creelighting-canada.com(600)473-1234 .11m1 IV? 06/04/2021 SAGE COURT ADDITION PAGE 42 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES M1-8 CREE LIGHTING LS8-80L-MOD30K-10V-* Surface mounted 8'long linear LED striplight,88W,80001m, Verify all TBD 90+CRI, MOD 3000K,0-10V dimming,120V. options. LS Series LED Surface Ambient Luminaire-8' Product Specifications Photometry CREE TRUEWHITE®TECHNOLOGY LS8-80L-35K-10V BASED ON CESTL REPORT TEST ff.PL10234-001A A revolutionary way to generate high-quality white light,Cree TrueWhite. Luminaire photometry has been conducted in accordance with IES LM-79-08.IES LM-79-08 Technology is a patented approach that delivers an exclusive combination specifies the entire luminaire as the source resulting in a luminaire efficiency of 100%. of 90+CRI,beautiful Light characteristics and Lifelong color consistency,all white maintaining high luminous efficacy-a true no compromise solution. Coefficients Of Utilization- CONSTRUCTION&MATERIALS 0 11111*._ 90° Zonal Cavity Method • Constructed of durable 22 gauge steel ' • Acrylic lens delivers a low-glare,diffused light distribution ®�`` RC%: 80 • Prepainted white for enhanced smooth finish 557 ` RW%: 70 50 38 10 70° OPTICAL SYSTEM RCR:0 116 116 116 116 • Unique combination of reflective and refractive optical components 1114 I 1 104 98 93 86 achieves a uniform,comfortable appearance while eliminating pixelation �, - andcolorfringing 2 94 a4 77 70 • Components work together to optimize distribution,balancing the 1671 ► , 50° 3 85 73 65 57 amount of high illuminancenwalls anlevelsionl u faces.l issurfaces with an ideal ��,. amount of light on walls and vertical surfaces.This increases the 4 77 65 55 48 perception of spaciousness _� 5 71 58 48 41 • -11%Uptight n2a 0° 20° 6 65 52 42 36 ELECTRICAL SYSTEM -90° 7 61 47 38 31 • Power Factor:>0.9 • Input Power:Stays constant over life 8 56 43 34 28 • Input Voltage:120-277 or 347 VAC,60Hz 9 53 39 31 25 • Operating Temperature Range:-28°C-+35°CI-18.4°F-+95°FI; 10 49 36 28 22 minimum operating temperature with EB14 option is 0°C(32°FI Average Luminance Table Icd/m'I • Total Harmonic Distortion:<20%for 120-277V Effective Floor cavity Reflectance:20% Horizontal Angle CONTROLS 0° 45° 90° Zonal Lumen Summary • Continuous dimming to 5%with 0-10V DC control protocol it o+ 45° 11.385 11,400 12,013• 10V Source Current:0.25mA Zone Lumens %Lamp Luminaire .5 • Use only lighting controls with neutral connection or controls intended 55° 10,397 10,800 11,753 0-30 1,709 N/A 20.8% for use with LED fixtures r 65° 9,235 10,399 11,658 > 0-40 2,809 N/A 34.2% • Reference www.creelink.com/exLink.asp?70982140Z58R34126620963 75° 7,756 10,343 11,834 for recommended dimming controls and wiring diagrams 0-60 5,082 N/A 61.9% 85° 5,274 11,407 12,948 0-90 7,326 N/A 89.2% REGULATORY&VOLUNTARY QUALIFICATIONS • cULus Listed 0-18o 8,210 N/A 100% • Suitable for damp locations Reference Mho://creelighting.com/products/indoor/surtace-ambient/ls-series for detailed photometric data • Suitable for continuous row mounting • Designed for indoor use only • Not intended for use in environments containing airborne corrosive agents such as chemical solvents,cleaners,or cutting fluids • Ingress Protection:IP20 LS Series Ambient Adjusted Lumen Maintenance' i • UL924 IEB option).Maximum mounting height:10.0'13.0m) 25K hr 50K hr 75K hr 100K hr Initial • RoHS compliant.Consult factory for additional details Ambient LMF Reported' Estimated' Estimated' Estimated' • EB14 option meets CA Title 20 Appliance Regulations LMF LMF LMF LMF • Meets FCC Part 15,Subpart B,Class A limits for conducted and 0°C 132°F) 1.04 1.04 1.04 1.04 1.04 radiated emissions 570 141°FI 1.03 1.03 1.03 1.03 1.03 • DLC qualified.Please refer to https://www.designlights.org/search/for most current information 10°0 150°FI 1.02 1.02 1.02 1.02 1.02 •A CA RESIDENTS WARNING:Cancer and Reproductive Harm- 15°C 159°FI 1.02 1.02 1.02 1.02 1.02 ww.p65warn ings.ca.gov 20°C 168°F) 1.01 1.01 1.01 1.01 1.01 Delivered Lumens&Electrical Data• 25°C 177°FI 1.00 1.00 1.00 1.00 1.00 Initial System Watts Efficacy Total Current(Al 30°C 166°FI 0.99 0.99 0.99 0.99 0.99 Lumen CCT Delivered ILPW 2 Package 35°C 195°F) 0.98 0.98 0.96 0.98 0.98 Lumens"120-2779 347V 120-27791 120V 208V 240V 277V 347V 'Lumen maintenance values at 25°C I]]°FI are calculated per IES TM-21 based on IES LM-80 report data for the LED 80L All 68 88 91 0.75 0.45 0.39 0.34 0.26 package and in-situ Luminaire testing.Luminaire ambient temperature factors(LATFI have been applied to all lumen maintenance factors. t0Lw/ 8,000 'In accordance with IES TM-21.Reported values represent interpolated values based on time durations that are up to EB14 All 92 N/A 87 0.78 0.47 0.40 0.35 N/A 6x the tested duration in the 1E5 LM-80 report for the LED. 'Estimated values are caculated and represent time durations that exceed the 6x test duration of the LED. 100L All 100 N/A 100 0.84 0.49 0.42 0.36 N/A 100E w/ 10.000 EB14 All 110 N/A 91 0.93 0.56 0.48 0.42 N/A •Electrical data at 25°C I]]°FI.A=tual wattage may differ by./-10%when operating between 120-222V or 34N./-10% ...Ming delivered Lumens at 25°C(7TFI.Actual production yield may vary between-10 and.10%of initial delivered lumens ©2020 Cree Lighting,A company of IDEAL INDUSTRIES.ALL rights reserved.For informational purposes only. Content is subject to change.Patent www.creetighting.com/patents.CreC,the Cree Logo,TrueWhite,Cree TrueWhite°.and the Cree TrueWhite Technology Logo are registered trademarks of Cree,Inc.LS874 is a trademark of � Cree Lighting,A company of IDEAL INDUSTRIES.The UL Logo is a registered trademark of UL LLC.The DLC DPL Logo CREE LIGHTING is a registered trademark of Efficiency) 68orward,Inc. �® US:creelighting.com 18001236-6800 ■/♦ Canada:creeliohtino-canada.com I800)473-1234 0-- 06/04/2021 SAGE COURT ADDITION PAGE 43 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES N1-6 ALIGHT D5-6'-LS-30-U-*-*-*-* Recessed 6'long linear LED downlight,4.5W/ft,901m/W,80+ Verify all CRI,3000K,optics TBD,0-10V dimming,120V. lengths per plans.Verify all TBD options. D5 I SPECIFICATION GUIDE ORDERING CODE F F F'it D5 3.ST' 3.57" 3.5]' 1.00' �3.5T�L L�(—.5]'� 1_3. i M. DROPROP LENS KICKER+WISP HE TECH"' PROJECT INFO DATE TYPE QUANTITY BASELINE PERFORMANCE(80 CRI-4000K) MOUNTING OPTIONS OUTPUT OPTICS NOMINAL LUMEN OUTPUT INPUT WATTS EFFICACY HE Tech"' 762 Im/ft 9.5 W/ft �80Im/W I = WISP(Asymmetric) 665 Im/ft 9.5 W/ft 70 Im/W II 1. IL x d Drop Lens 692 Im/ft 9.5 W/ft 73Im/W (G)IFIuae Gyp/X.Lld ()MI TrImFange Louvers408 Im/ft 4.5 W/ft 90 Im/W • 'i�— .a HEE Tech"' " 408 Im/ft 4.5 W/ft 90 ImNV Lo-- WISP(Asymmetric) 333 Im/ft 4.5 W/ft 70 Im/W MIT-n"ra,s all*eartv,e ICIIT-aar*,,s Slot 5 Drop Lens 370 Im/ft 4.5 W/ft 82 Im/W N Louvers 282 Im/ft 4.5 W/ft 62 Im/W Custom tuned output available from 25%to 125%of high output.Please consult factory for custom lumen output and wattage.'Flat Blade Louver calculated using the aluminum finish. IF ALL PRODUCT NOMENCLATURE IS LISTED WITH A QS,THIS PRODUCT IS AVAILABLE IN OUR QUICK-SHIP PROGRAM D5 SERIES LENGTH OR PATTERN TYPE OUTPUT LED CCT VOLTAGE DIRECT OPTICS D5 _ Nominal Length* LS LED Standard Output 27 2700K U Universal 120V-277V HE HE Tech" M_ Exact Length*' LH LED High Output 30 3000K 3 347V KS Awash Kicker+WISP C_ LED Custom Output* 35 3500K DL 1"Drop Lens PL_ "L"Shape''* 40 4000K LV Flat Blade Louvers* PU_ "U"Shape*** PC Polycarbonate WISP PR_ Rectangle/Square*** CP Custom Pattern**** 'Specify in feet to the nearest..(i.e.12) "Specify in Inches to the nearest vB(l...M1e0.125) ...Specify in to the nearest 1/e(see Pattern Guide for configuratio canted Design Asses, ava.1er=25%to 125,of LED High OM Aluminum stalwera MOUNTING FINISH* DIMMING EMERGENCY G Flush Gyp/Mud Over Flange T Titanium D Standard 0-10V dimming* EC Emergency-circuited* RG 1"Regressed Gyp/Mud Over Flange W White D7 HiLume Ecosystems 1%(LDE1) E_Emergency-battery** XP 1/2"Trim Flange B Black D2 ELV 5%dimming 7 T-Bar 9/16" O_ Other** D3 DMX 0.1%dim-to-dark X T-Bar 15/16" D4 DALI dim-to-off N T-Bar 9/16 Slot NAIR nLight®AIR(dim-to-off)** T4 4"On Center Standard T-Bar9/16" NWIR nLight®Wired(dim-to-off)** •Not evelalstle an fixtures v 4'length.Smallest EM°WWI Is TR.II N4 4"On Center Slot T-Bar 9/16"' DO Other Dimming** entire fature is on EM circuit,no need to call "'factory-installed emergency battery pecIc out ecly ee types onry .Not ay.imble for Housing sightly regresses .V.Vmw.. specify a other dimmingdriverlewea weds, Design Assist. xrv.see technical data for more information. SENSORS OPTIONS OC Occupancy Sensor-Ceiling MRL_ 2"LED Downlight Module* PC Photocell/Daylight Sensor-Ceiling M Multi-Circuit** OF Occupancy Sensor-Fixture N New York City Code PF Photocell/Daylight Sensor-Fixture K Natatorium Application'** OPC Occupancy&daylight Sensor-Ceiling CI Wet Location*"* 90+ OPF Occupancy&daylight Sensor-Fixture CRI Chi CRI CP Chicago Plenum MRI MRI 'Specify req.'.quantity.see LED Module Addendum for additional amedngdetalls. See...Not available with guide and contact Design Assist.Not compatible with Drop Len Flat Mode Louvers or Wolf Grazer Optics. nd Wgm/or mullion mounted appllc (direct osky no edb not applications.Refer to Wet Location brochure Sensor will be matched to dim g input. and contact Design Assist for more information.Not compalible with Drop Lens,Flat Blade Louvers optics. a• 1 i g h t 3728 Maritime Way I Oceanside,CA 92056 1760.727.7675 I alights.com ®®El eldottEo Elm u Tech lensacaan arm,/ Controls SensorsRECEIVED CeRE C E IVE D 06/04/2021 SAGE COURT ADDITION PAGE 44 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES N1-6 ALIGHT D5-6'-LS-30-U-*-*-*-* Recessed 6'long linear LED downlight,4.5W/ft,901m/W,80+ Verify all CRI,3000K,optics TBD,0-10V dimming,120V. lengths per plans.Verify all TBD options. D5 I MOUNTING (G)I Flush Gyp/Hard Lid (XP) Trim Flange (T)IT-bar 9/16" (X)IT-bar 15/16" (N) T-bar 9/16"Slot STANDARD PATTERNS CORNER DETAIL 11111111� Welded corner) \_ (PLCW)I Wall to ceiling (PLWW)I Wall to wall (PLW)I Wall only r , 010j,Joining pins (PLC)I Ceiling only (PUWW)I Wall to wall (PUWC) Wall to ceiling to wall 11116116- 111bll1 lt \► \ \r (PUW)I Wall only (PUC)I Ceiling only (PRW)I Wall only iii.0. (PRC)I Ceiling only (CP) Custom pattern a-1 i g h t MOUNTING ALIGHTS.COMRE rE��V/E s. 06/04/2021 SAGE COURT ADDITION PAGE 45 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES N1-6 ALIGHT D5-6'-LS-30-U-*-*-*-* Recessed 6'long linear LED downlight,4.5W/ft,901m/W,80+ Verify all CRI,3000K,optics TBD,0-10V dimming,120V. lengths per plans.Verify all TBD options. D5 I NLIGHT NLIGHT®DIMENSIONS AIR:rIO Recessed AIR:res7 Recessed 2" 3.25" // // l i oix ii *Sensor and filler panne)for sensored nLight AIR only 'Sensor and filler panne)for sensored nLight AIR only AIR:rPP20 WIRED:nPP16 ����ePlllln ullllTry��� tIII llln HIIIIITfry�� 6.45" - _ 6.45" II IIIIIJI\���\ ®IIII IIIII% 3.501 3.50„ a *Mounted on standard 4"octogonal j-box.Fits on any j-box with *Mounted on standard 4"octogonal j-box.Fits on any j-box with 5/8"knockouts 5/8"knockouts a• l i g h t NLIGHT DIMENSIONS • ALIGHTS.COM ICE E I /E ll 06/04/2021 SAGE COURT ADDITION PAGE 46 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES N1-6 ALIGHT D5-6'-LS-30-U-*-*-*-* Recessed 6'long linear LED downlight,4.5W/ft,901m/W,80+ Verify all CRI,3000K,optics TBD,0-10V dimming,120V. lengths per plans.Verify all TBD options. D5 I TECHNICAL DATA LINEAR DIMENSIONS include Lutron Eco-system H-series(LDE1):Hi-IumeTM 1%LED dimming driver with Soft On,Fade to Black;and DMX and DALI protocol drivers. Elements-4',8',and 12'nominal length individual fixtures that can be Other Lutron and specialty drivers available,contact factory. joined to create continuous row lengths. Integrations-Nominal or exact lengths to the nearest 1/8th of an inch EMERGENCY available as individual fixtures or joined to create continuous row lengths, minimum fixture lengths is 12 inches. Patterns comprised of 90 degree This luminaire is provided with a factory installed LED emergency lighting precisely welded fully illuminated corners provide a multitude of geometric battery pack for both normal and emergency operation, 120-277v only. options and architectural transitions. This fixture integrated unit contains long-life Ni-Cad recyclable battery, 24 hour charger,and converter circuit.Test switch and charge indicator Custom-Contact Design Assist for modifications to product not detailed provided.Test button to be remote located within 3 feet of the luminaire,by within specification sheets. others in accordance with local code.Emergency mode provides constant power to a nominal 12W LED load for a period of 90 minutes,delivering 1200 lumens of unwavering illumination throughout the full 90 minute OPTICS emergency duration.Unless otherwise specified,the emergency battery pack will illuminate one 2 foot end in the direct portion of the fixture. HE Tech'"patented high efficacy extruded diffuse acrylic lens technology with integrated opaque white reflector delivers superior lumen output Emergency circuiting provided as a separate circuit from normal power with optimal uniform lens surface luminance for direct distribution. A circuit according to NEC requirements,specify circuit length and location. rigid partially diffuse extruded dust cover lens optimized for indirect LED performance delivers 92%transmittance. CONTROLS The a-wash kicker plus WISPY.diffuse white extruded acrylic lens produces a soft asymmetric distribution. Low-profile integral occupancy and daylight sensors are available to deliver high performance control in an Drop Lens is a light diffuser option that turns the luminaire into a decorative architecturally pleasing package. graphical statement.The diffuser drops down from the luminaire's main body of 1"and sits flush with the metal end caps.Once lit,the drop lens Integrated nLight®for system networking wired and wireless: glows vividly and offers a wider diffusion pattern. It is not available in natatorium or wet locations. NLIGHTOO AIR WIRELESS The integrated API smart sensor is part of each luminaire in Flat Blade Louvers are used to cut down on glare and better control the the nLight®AIR network,which can be grouped to control light source This option includes a linear film diffuser(inserted between multiple luminaires.The granularity of control with the digital the louvers and the LEDs),that enhances glare control and lends light PIR occupancy detection and daylight sensing makes a great sources.The standard finish is aluminum.Other colors and custom finish solution for any application.Optionally you can order nLight®AIR options available,specify RAL#or contact factory regarding custom finish less sensors for compatibility with an nLight Air wireless system. requirement.It is not available in natatorium or wet locations. The rIO,rES7,rMSOD,and rCMS models are available for integration. LED LIGHT SOURCE CONTROLS AND SYSTEM NETWORKING OPTIONS Custom manufactured linear board array uses high performance Nichia® For wired networking via Cat-5e,choose an nLight®wired LED in combination with a performance driven heat sink technology. module.The nIO EZ PH,nIO EZDL CCT,nES7 and nCM are Tested in accordance with LM79 and LM-80;L70>60,0000hr;operated at available for integration. reduced output for high efficacy and lumen maintenance.3000K,3500K, and 4000K with 80+CRI standard;other color temperatures and 90+CRI Other manufacturer controls may be available for product available upon request,contact factory.LED color variation maintained at a integration,contact factory. 3-step MacAdam ellipse(SDCM 3x).LEDs are available in Low,Standard, and High outputs. Refer to photometry for delivered lumens. Custom output in the range of 25%to 125%of high output,contact factory. LED DIMMING DRIVER Factory tuned constant current electronic 0-10V control dimming driver is standard. Specification grade dimming down to 1%. Driver life of 50,000 hrs with ambient operating temperature range of-20°C to+50°C, maximum case temperature of 80°C.Electrical specifications at maximum driver load:PF>0.9,THD<20%,>85%Efficiency. Other available drivers a• l i g h t TECHNICAL DATA • ALIGHTS.COM E I V/E rl ICE , 06/04/2021 SAGE COURT ADDITION PAGE 47 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES N1-6 ALIGHT D5-6'-LS-30-U-*-*-*-* Recessed 6'long linear LED downlight,4.5W/ft,901m/W,80+ Verify all CRI,3000K,optics TBD,0-10V dimming,120V. lengths per plans.Verify all TBD options. D5 I TECHNICAL DATA MOUNTING WARRANTY Common recessed mounting options available. Contact factory for Limited defect-free manufactured equipment warranty provided under applications regarding modified recessed mounting conditions. normal use and proper storage for a period of one(1)year. LED products (LED boards and drivers)will be covered for a period of five(5)years.Wet Flush Gypsum Flange:Raw aluminum flange is attached to blocking(by location fixtures are not recommended for extreme wet weather conditions others),then mudded over and/or painted by installing contractor to provide and must be installed according to factory drawings;there is a modified a"flangeless"fxture appearance in recessed ceiling/wall applications. warranty for LED components installed in applications not in accordance with factory recommendations/drawings. Please refer to full terms and Trim Flange: 1/2" wide visible powder coated flange, specify finish conditions on our website. requirement.Fixture is mounted to structure using threaded rod(by others) or ceiling tie wires(provided).Use of a-clampTM secures fixture trim and housing around ceiling/wall material.Use for any gypsum or hard ceiling/ LED MODULES wall that requires a minimal flange covering the ceiling cut-out edge. Heavy-duty, milled aluminum plate module contains recessed cutouts for flush mounting of LED module(supplied).Specification and layout of T-Bar/Grid Ceiling.9/16"or 15/16"standard T-Bar or 9/16"slot ceiling. modules and lamping per LED MODULE ADDENDUM. Raw aluminum flange sits on T-Bar and is concealed from view. 4"Armstrong TechzoneTM /USG LogixrM or other 4" Utility Systems. Suitable for use in 4"on-center standard or slot T-Bar systems. STRUCTURE Robust, high quality 60% recycled aluminum extruded housing. 0.040" thick aluminum internal gear trays. Flat or flanged aluminum end caps. Aluminum joiner brackets.4 lbs/ft approximate fixture weight. FINISH Electrostatically applied powder coat finish.Standard finish options include titanium,white,and black.Other colors and custom finish options available, specify RAL#or contact factory regarding custom finish requirement. LIS TING IC Rated for IC,Airtight,CCEA Ceilings.CCEA mark applied for Chicago Plenum applications. UUCUL rated for Damp Locations. Tested in accordance with UL 1598 and certified to CEC/CSA C22.1,NEC,ANSI/ NFPA 70,and NOM-001-SEDE. UL Wet location label available.Complies with UL definition of wet locations to prevent accumulation of water on live parts,electrical components,or conductor not identified for use in contact with water through the provision of weep holes.Waterproof connector to be provided by others.Installing contractor responsible for properly sealing and waterproofing all field drilled mounting and power feed locations. alight TECHNICAL DATA • ALIGHTS.COM REc7Ivcin 06/04/2021 SAGE COURT ADDITION PAGE 48 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES N1-8 ALIGHT D5-8'-LS-30-U-*-*-*-* Recessed 8'long linear LED downlight,4.5W/ft,901m/W,80+ Verify all CRI,3000K,optics TBD,0-10V dimming,120V. lengths per plans.Verify all TBD options. D5 I SPECIFICATION GUIDE ORDERING CODE F F F'it D5 3.ST' 3.57" 3.5]' 1.00' �3.5T�L L��3.5]'� 1_3. i KS SH M. DROPROP LENS KICKER+WISP HE TECH"' PROJECT INFO DATE TYPE QUANTITY BASELINE PERFORMANCE(80 CRI-4000K) MOUNTING OPTIONS OUTPUT OPTICS NOMINAL LUMEN OUTPUT INPUT WATTS EFFICACY HE Tech' 762 Im/ft 9.5 W/ft �80Im/W I , WISP(Asymmetric) 665 Im/ft 9.5 W/ft 70 Im/W II 1. IL x d Drop Lens 692 Im/ft 9.5 W/ft 73 Im/W 1GIIFIuse Gyp/n r.Lld TClITr*Range Louvers408 Im/ft 4.5 W/ft 90 Im/W • 'i�— .a HEE Tech' ' 408 Im/ft 4.5 W/ft 90 ImNV Lo-- WISP(Asymmetric) 333 Im/ft 4.5 W/ft 70 Im/W mlT-earEfr* (XI ln-s,1s,5 wl1T-B 5 arg/,swt 5 Drop Lens 370 Im/ft 4.5 W/ft 82 Im/W N Louvers 282 Im/ft 4.5 W/ft 62 Im/W Custom tuned output available from 25%to 125%of high output.Please consult factory for custom lumen output and wattage.'Flat Blade Louver calculated using the aluminum finish. IF ALL PRODUCT NOMENCLATURE IS LISTED WITH A QS,THIS PRODUCT IS AVAILABLE IN OUR QUICK-SHIP PROGRAM D5 SERIES LENGTH OR PATTERN TYPE OUTPUT LED CCT VOLTAGE DIRECT OPTICS D5 _ Nominal Length* LS LED Standard Output 27 2700K U Universal 120V-277V HE HE Tech" M_ Exact Length*' LH LED High Output 30 3000K 3 347V KS Awash Kicker+WISP C_ LED Custom Output* 35 3500K DL 1"Drop Lens PL_ "L"Shape''* 40 4000K LV Flat Blade Louvers* PU_ "U"Shape*** PC Polycarbonate WISP PR_ Rectangle/Square*** CP Custom Pattern**** perry m feet to the nearest mot(i.e.,2t "Specify in Inures to the neareet vB a...M1e0.125r ...Specify in to the nearenuh(See P****A*gefor configurations) contact Design Assist 'Available from 25%to 125,of LED High output Aluminum stelwera MOUNTING FINISH* DIMMING EMERGENCY G Flush Gyp/Mud Over Flange T Titanium D Standard 0-10V dimming* EC Emergency-circuited* RG 1"Regressed Gyp/Mud Over Flange W White D7 HiLume Ecosystems 1%(LDE1) E_Emergency-battery** XP 1/2"Trim Flange B Black D2 ELV 5%dimming T T-Bar 9/16" O_ Other** D3 DMX 0.1%dim-to-dark X T-Bar 15/16" D4 DALI dim-to-off N T-Bar 9/16 Slot NAIR nLight®AIR(dim-to-off)** T4 4"On Center Standard T-Bar9/16" NWIR nLight®Wired(dim-to-off)** •Not evelalstle on fixtures v 4'length.Smallest EX1 drcutt Is TR.II N4 4"On Center Slot T-Bar 9/16"' DO Other Dimming** entire fature is on al circuit,no need to call "'factory-installed emergency battery pecIc out ecly ee types onry .Not swab,.for Housing sightly regresses .V.Vmw.. specify a other dimmingdriverlewea weds, Desgn/1.k xrv.see technical data for more information. SENSORS OPTIONS OC Occupancy Sensor-Ceiling MRL_ 2"LED Downlight Module* PC Photocell/Daylight Sensor-Ceiling M Multi-Circuit** OF Occupancy Sensor-Fixture N New York City Code PF Photocell/Daylight Sensor-Fixture K Natatorium Application'** OPC Occupancy&daylight Sensor-Ceiling O Wet Location*"* 90+ OPF Occupancy&daylight Sensor-Fixture CRI Chi CRI CP Chicago Plenum MRI MRI 'Specify req.'.quantity.see LED Module Addendum for additional ordering details. See...Not available with guide and contact Design Assist.Not compatible with Drop Len Flat Mode Louvers or Wolf Grazer Optics. nd Wgm/or mullion mounted appllc (direct osky no edb not applications.Refer to Wet Location brochure Sensor will be matched to dimming input. and contact Design Assist for more information.Not compalible with Drop Lens,Flat Blade Louvers optics. a• 1 i g h t 3728 Maritime Way I Oceanside,CA 92056 1760.727.7675 I alights.com ®®El eldottEo Elm u Tech lens arm,/ Controls Sensors s RE C E WED 06/04/2021 SAGE COURT ADDITION PAGE 49 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES N1-8 ALIGHT D5-8'-LS-30-U-*-*-*-* Recessed 8'long linear LED downlight,4.5W/ft,901m/W,80+ Verify all CRI,3000K,optics TBD,0-10V dimming,120V. lengths per plans.Verify all TBD options. D5 I MOUNTING (G)I Flush Gyp/Hard Lid (XP) Trim Flange (T)I T-bar 9/16" (X)I T-bar 15/16" (N) T-bar 9/16"Slot STANDARD PATTERNS CORNER DETAIL � 11� /J Welded corner) \_ (PLCW)I Wall to ceiling (PLWW)I Wall to wall (PLW)I Wall only r , 010 Joining pins j, (PLC)I Ceiling only (PUWW)I Wall to wall (PUWC) Wall to ceiling to wall 11116116- 111bll1 lt \► \S . (PUW)I Wall only (PUC)I Ceiling only (PRW)I Wall only iii.0. (PRC)I Ceiling only (CP) Custom pattern a-1 i g h t MOUNTING ALIGHTS.COMRE rE��V/E s. 06/04/2021 SAGE COURT ADDITION PAGE 50 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES N1-8 ALIGHT D5-8'-LS-30-U-*-*-*-* Recessed 8'long linear LED downlight,4.5W/ft,901m/W,80+ Verify all CRI,3000K,optics TBD,0-10V dimming,120V. lengths per plans.Verify all TBD options. D5 I NLIGHT NLIGHT®DIMENSIONS AIR:rIO Recessed AIR:res7 Recessed 2" 3.25" // // oix ii *Sensor and filler panne)for sensored nLight AIR only *Sensor and filler panne)for sensored nLight AIR only AIR:rPP20 WIRED:nPP16 ����ePIIIIn uIIIITry��� IIIn HIII irloi�� 6.45" — _ 6.45" II IIIIIJI\���\ ®HIII HIII% 3.501 3.50„ a *Mounted on standard 4"octogonal j-box.Fits on any j-box with *Mounted on standard 4"octogonal j-box.Fits on any j-box with 5/8"knockouts 5/8"knockouts a• l i g h t NLIGHT DIMENSIONS • ALIGHTS.COM ICE E I /E ll 06/04/2021 SAGE COURT ADDITION PAGE 51 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES N1-8 ALIGHT D5-8'-LS-30-U-*-*-*-* Recessed 8'long linear LED downlight,4.5W/ft,901m/W,80+ Verify all CRI,3000K,optics TBD,0-10V dimming,120V. lengths per plans.Verify all TBD options. D5 I TECHNICAL DATA LINEAR DIMENSIONS include Lutron Eco-system H-series(LDE1):Hi-IumeTM 1%LED dimming driver with Soft On,Fade to Black;and DMX and DALI protocol drivers. Elements-4',8',and 12'nominal length individual fixtures that can be Other Lutron and specialty drivers available,contact factory. joined to create continuous row lengths. Integrations-Nominal or exact lengths to the nearest 1/8th of an inch EMERGENCY available as individual fixtures or joined to create continuous row lengths, minimum fixture lengths is 12 inches. Patterns comprised of 90 degree This luminaire is provided with a factory installed LED emergency lighting precisely welded fully illuminated corners provide a multitude of geometric battery pack for both normal and emergency operation, 120-277v only. options and architectural transitions. This fixture integrated unit contains long-life Ni-Cad recyclable battery, 24 hour charger,and converter circuit.Test switch and charge indicator Custom-Contact Design Assist for modifications to product not detailed provided.Test button to be remote located within 3 feet of the luminaire,by within specification sheets. others in accordance with local code.Emergency mode provides constant power to a nominal 12W LED load for a period of 90 minutes,delivering 1200 lumens of unwavering illumination throughout the full 90 minute OPTICS emergency duration.Unless otherwise specified,the emergency battery pack will illuminate one 2 foot end in the direct portion of the fixture. HE Tech'"patented high efficacy extruded diffuse acrylic lens technology with integrated opaque white reflector delivers superior lumen output Emergency circuiting provided as a separate circuit from normal power with optimal uniform lens surface luminance for direct distribution. A circuit according to NEC requirements,specify circuit length and location. rigid partially diffuse extruded dust cover lens optimized for indirect LED performance delivers 92%transmittance. CONTROLS The a-wash kicker plus WISPY.diffuse white extruded acrylic lens produces a soft asymmetric distribution. Low-profile integral occupancy and daylight sensors are available to deliver high performance control in an Drop Lens is a light diffuser option that turns the luminaire into a decorative architecturally pleasing package. graphical statement.The diffuser drops down from the luminaire's main body of 1"and sits flush with the metal end caps.Once lit,the drop lens Integrated nLight®for system networking wired and wireless: glows vividly and offers a wider diffusion pattern. It is not available in natatorium or wet locations. NLIGHTOO AIR WIRELESS The integrated API smart sensor is part of each luminaire in Flat Blade Louvers are used to cut down on glare and better control the the nLight®AIR network,which can be grouped to control light source This option includes a linear film diffuser(inserted between multiple luminaires.The granularity of control with the digital the louvers and the LEDs),that enhances glare control and lends light PIR occupancy detection and daylight sensing makes a great sources.The standard finish is aluminum.Other colors and custom finish solution for any application.Optionally you can order nLight®AIR options available,specify RAL#or contact factory regarding custom finish less sensors for compatibility with an nLight Air wireless system. requirement.It is not available in natatorium or wet locations. The rIO,rES7,rMSOD,and rCMS models are available for integration. LED LIGHT SOURCE CONTROLS AND SYSTEM NETWORKING OPTIONS Custom manufactured linear board array uses high performance Nichia® For wired networking via Cat-5e,choose an nLight®wired LED in combination with a performance driven heat sink technology. module.The nIO EZ PH,nIO EZDL CCT,nES7 and nCM are Tested in accordance with LM79 and LM-80;L70>60,0000hr;operated at available for integration. reduced output for high efficacy and lumen maintenance.3000K,3500K, and 4000K with 80+CRI standard;other color temperatures and 90+CRI Other manufacturer controls may be available for product available upon request,contact factory.LED color variation maintained at a integration,contact factory. 3-step MacAdam ellipse(SDCM 3x).LEDs are available in Low,Standard, and High outputs. Refer to photometry for delivered lumens. Custom output in the range of 25%to 125%of high output,contact factory. LED DIMMING DRIVER Factory tuned constant current electronic 0-10V control dimming driver is standard. Specification grade dimming down to 1%. Driver life of 50,000 hrs with ambient operating temperature range of-20°C to+50°C, maximum case temperature of 80°C.Electrical specifications at maximum driver load:PF>0.9,THD<20%,>85%Efficiency. Other available drivers a• l i g h t TECHNICAL DATA • ALIGHTS.COM E I V/E rl ICE , 06/04/2021 SAGE COURT ADDITION PAGE 52 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES N1-8 ALIGHT D5-8'-LS-30-U-*-*-*-* Recessed 8'long linear LED downlight,4.5W/ft,901m/W,80+ Verify all CRI,3000K,optics TBD,0-10V dimming,120V. lengths per plans.Verify all TBD options. D5 I TECHNICAL DATA MOUNTING WARRANTY Common recessed mounting options available. Contact factory for Limited defect-free manufactured equipment warranty provided under applications regarding modified recessed mounting conditions. normal use and proper storage for a period of one(1)year. LED products (LED boards and drivers)will be covered for a period of five(5)years.Wet Flush Gypsum Flange:Raw aluminum flange is attached to blocking(by location fixtures are not recommended for extreme wet weather conditions others),then mudded over and/or painted by installing contractor to provide and must be installed according to factory drawings;there is a modified a"flangeless"fxture appearance in recessed ceiling/wall applications. warranty for LED components installed in applications not in accordance with factory recommendations/drawings. Please refer to full terms and Trim Flange: 1/2" wide visible powder coated flange, specify finish conditions on our website. requirement.Fixture is mounted to structure using threaded rod(by others) or ceiling tie wires(provided).Use of a-clampTM secures fixture trim and housing around ceiling/wall material.Use for any gypsum or hard ceiling/ LED MODULES wall that requires a minimal flange covering the ceiling cut-out edge. Heavy-duty, milled aluminum plate module contains recessed cutouts for flush mounting of LED module(supplied).Specification and layout of T-Bar/Grid Ceiling.9/16"or 15/16"standard T-Bar or 9/16"slot ceiling. modules and lamping per LED MODULE ADDENDUM. Raw aluminum flange sits on T-Bar and is concealed from view. 4"Armstrong TechzoneTM /USG LogixrM or other 4" Utility Systems. Suitable for use in 4"on-center standard or slot T-Bar systems. STRUCTURE Robust, high quality 60% recycled aluminum extruded housing. 0.040" thick aluminum internal gear trays. Flat or flanged aluminum end caps. Aluminum joiner brackets.4 lbs/ft approximate fixture weight. FINISH Electrostatically applied powder coat finish.Standard finish options include titanium,white,and black.Other colors and custom finish options available, specify RAL#or contact factory regarding custom finish requirement. LIS TING IC Rated for IC,Airtight,CCEA Ceilings.CCEA mark applied for Chicago Plenum applications. UUCUL rated for Damp Locations. Tested in accordance with UL 1598 and certified to CEC/CSA C22.1,NEC,ANSI/ NFPA 70,and NOM-001-SEDE. UL Wet location label available.Complies with UL definition of wet locations to prevent accumulation of water on live parts,electrical components,or conductor not identified for use in contact with water through the provision of weep holes.Waterproof connector to be provided by others.Installing contractor responsible for properly sealing and waterproofing all field drilled mounting and power feed locations. alight TECHNICAL DATA • ALIGHTS.COM REc7Ivcin 06/04/2021 SAGE COURT ADDITION PAGE 53 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES N1-12 ALIGHT D5-12'-LS-30-U-*-*-*-* Recessed 12' long linear LED downlight,4.5W/ft,901m/W,80+ Verify all CRI,3000K,optics TBD,0-10V dimming,120V. lengths per plans.Verify all TBD options. D5 I SPECIFICATION GUIDE ORDERING CODE F F F'it D5 3.ST' 3.57" 3.5]' 1.00' �3.5T�L L�I-3.5]'� 1_3. i KS SH M. DROPROP LENS KICKER+WISP HE TECH"' PROJECT INFO DATE TYPE QUANTITY BASELINE PERFORMANCE(80 CRI-4000K) MOUNTING OPTIONS OUTPUT OPTICS NOMINAL LUMEN OUTPUT INPUT WATTS EFFICACY HE Tech' 762 Im/ft 9.5 W/ft �80Im/W I , WISP(Asymmetric) 665 Im/ft 9.5 W/ft 70 Im/W II 1`. 'L x d Drop Lens 692 Im/ft 9.5 W/ft 73Im/W IGIIFIuae Gyp/X.Lld TClIT**Flange Louvers408 Im/ft 4.5 W/ft 90 Im/W • 'i�— .a HEE Tech' ' 408 Im/ft 4.5 W/ft 90 ImNV Lo-- WISP(Asymmetric) 333 Im/ft 4.5 W/ft 70 Im/W MIT-earEfr* allneartv,e ICIIT-Barg/,5 Slot 5 Drop Lens 370 Im/ft 4.5 W/ft 82 Im/W N Louvers 282 Im/ft 4.5 W/ft 62 Im/W Custom tuned output available from 25%to 125%of high output.Please consult factory for custom lumen output and wattage.'Flat Blade Louver calculated using the aluminum finish. IF ALL PRODUCT NOMENCLATURE IS LISTED WITH A QS,THIS PRODUCT IS AVAILABLE IN OUR QUICK-SHIP PROGRAM D5 SERIES LENGTH OR PATTERN TYPE OUTPUT LED CCT VOLTAGE DIRECT OPTICS D5 _ Nominal Length* LS LED Standard Output 27 2700K U Universal 120V-277V HE HE Tech" M_ Exact Length*' LH LED High Output 30 3000K 3 347V KS Awash Kicker+WISP C_ LED Custom Output* 35 3500K DL 1"Drop Lens PL_ "L"Shape''* 40 4000K LV Flat Blade Louvers* PU_ "U"Shape*** PC Polycarbonate WISP PR_ Rectangle/Square*** CP Custom Pattern**** 'Specify in feet to the nearest mat(i.e.,2t "Specify in Inches to the nearest vB(l...M100.125) ...Specify in to the nearestu ni*h(SeeP, A,gefor configurations) ch canted Design Assist ava.1er=25%to 125,of LED High OM Aluminum stalwera MOUNTING FINISH* DIMMING EMERGENCY G Flush Gyp/Mud Over Flange T Titanium D Standard 0-10V dimming* EC Emergency-circuited* RG 1"Regressed Gyp/Mud Over Flange W White D7 HiLume Ecosystems 1%(LDE1) E_Emergency-battery** XP 1/2"Trim Flange B Black D2 ELV 5%dimming T T-Bar 9/16" O_ Other** D3 DMX 0.1%dim-to-dark X T-Bar 15/16" D4 DALI dim-to-off N T-Bar 9/16 Slot NAIR nLight®AIR(dim-to-off)** T4 4"On Center Standard T-Bar9/16" NWIR nLight®Wired(dim-to-off)** •Not evelalstle an fixtures v 4'length.Smallest EM°WWI Is TR.II N4 4"On Center Slot T-Bar 9/16"' DO Other Dimming** entire fature is on EM circuit,no need to call "'factory-installed emergency battery pecIc out ecly ee types onry .Not avaimble for Housing sightly regresses .V.Vmw.. specify a other dimmingdriverlewea weds, Design Assist. xrv.see technical data for more information. SENSORS OPTIONS OC Occupancy Sensor-Ceiling MRL_ 2"LED Downlight Module* PC Photocell/Daylight Sensor-Ceiling M Multi-Circuit** OF Occupancy Sensor-Fixture N New York City Code PF Photocell/Daylight Sensor-Fixture K Natatorium Application'** OPC Occupancy&daylight Sensor-Ceiling O Wet Location*"* 90+ OPF Occupancy&daylight Sensor-Fixture CRI Chi CRI CP Chicago Plenum MRI MRI 'Specify req.'.quantity.see LED Module Addendum for additional amedngdetalls. See...Not available with guide and contact Design Assist.Not compatible with Drop Len Flat Mode Louvers or Wolf Grazer Optics. nd Wgm/or mullion mounted appllc (direct osky no edb not applications.Refer to Wet Location brochure Sensor will be matched to dimming input. and contact Design Assist for more information.Not compalible with Drop Lens,Flat Blade Louvers optics. a• 1 i g h t 3728 Maritime Way I Oceanside,CA 92056 1760.727.7675 I alights.com ®®El eldottEo Ego ® u Tech lensacrean aray Controls SensorsRECEIVED CRRE C E IVE D 06/04/2021 SAGE COURT ADDITION PAGE 54 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES N1-12 ALIGHT D5-12'-LS-30-U-*-*-*-* Recessed 12' long linear LED downlight,4.5W/ft,901m/W,80+ Verify all CRI,3000K,optics TBD,0-10V dimming,120V. lengths per plans.Verify all TBD options. D5 I MOUNTING (G)I Flush Gyp/Hard Lid (XP) Trim Flange (T)I T-bar 9/16" (X)I T-bar 15/16" (N) T-bar 9/16"Slot STANDARD PATTERNS CORNER DETAIL 11111111� Welded corner) \_ (PLCW)I Wall to ceiling (PLWW)I Wall to wall (PLW)I Wall only r , 010 Joining pins j, (PLC)I Ceiling only (PUWW)I Wall to wall (PUWC) Wall to ceiling to wall 11116116- 111bll1 lt \► \S . (PUW)I Wall only (PUC)I Ceiling only (PRW)I Wall only iii.0. (PRC)I Ceiling only (CP) Custom pattern a l i g h t MOUNTING ALIGHTS.COMRE! E I E D V 06/04/2021 SAGE COURT ADDITION PAGE 55 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES N1-12 ALIGHT D5-12'-LS-30-U-*-*-*-* Recessed 12' long linear LED downlight,4.5W/ft,901m/W,80+ Verify all CRI,3000K,optics TBD,0-10V dimming,120V. lengths per plans.Verify all TBD options. D5 I NLIGHT NLIGHT®DIMENSIONS AIR:rIO Recessed AIR:res7 Recessed 2" 3.25" // l i oix ii *Sensor and filler panne)for sensored nLight AIR only 'Sensor and filler panne)for sensored nLight AIR only AIR:rPP20 WIRED:nPP16 ����ePlllln ullllTry��� tIII llln HIIIII�Pfry�� 6.45" — _ 6.45" II IIIIIJI\���\ ®IIII IIIII% 3.501 3.50„ a *Mounted on standard 4"octogonal j-box.Fits on any j-box with *Mounted on standard 4"octogonal j-box.Fits on any j-box with 5/8"knockouts 5/8"knockouts a• l i g h t NLIGHT DIMENSIONS • ALIGHTS.COM ICE E I /E ll 06/04/2021 SAGE COURT ADDITION PAGE 56 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES N1-12 ALIGHT D5-12'-LS-30-U-*-*-*-* Recessed 12' long linear LED downlight,4.5W/ft,901m/W,80+ Verify all CRI,3000K,optics TBD,0-10V dimming,120V. lengths per plans.Verify all TBD options. D5 I TECHNICAL DATA LINEAR DIMENSIONS include Lutron Eco-system H-series(LDE1):Hi-IumeTM 1%LED dimming driver with Soft On,Fade to Black;and DMX and DALI protocol drivers. Elements-4',8',and 12'nominal length individual fixtures that can be Other Lutron and specialty drivers available,contact factory. joined to create continuous row lengths. Integrations-Nominal or exact lengths to the nearest 1/8th of an inch EMERGENCY available as individual fixtures or joined to create continuous row lengths, minimum fixture lengths is 12 inches. Patterns comprised of 90 degree This luminaire is provided with a factory installed LED emergency lighting precisely welded fully illuminated corners provide a multitude of geometric battery pack for both normal and emergency operation, 120-277v only. options and architectural transitions. This fixture integrated unit contains long-life Ni-Cad recyclable battery, 24 hour charger,and converter circuit.Test switch and charge indicator Custom-Contact Design Assist for modifications to product not detailed provided.Test button to be remote located within 3 feet of the luminaire,by within specification sheets. others in accordance with local code.Emergency mode provides constant power to a nominal 12W LED load for a period of 90 minutes,delivering 1200 lumens of unwavering illumination throughout the full 90 minute OPTICS emergency duration.Unless otherwise specified,the emergency battery pack will illuminate one 2 foot end in the direct portion of the fixture. HE Tech'"patented high efficacy extruded diffuse acrylic lens technology with integrated opaque white reflector delivers superior lumen output Emergency circuiting provided as a separate circuit from normal power with optimal uniform lens surface luminance for direct distribution. A circuit according to NEC requirements,specify circuit length and location. rigid partially diffuse extruded dust cover lens optimized for indirect LED performance delivers 92%transmittance. CONTROLS The a-wash kicker plus WISPY.diffuse white extruded acrylic lens produces a soft asymmetric distribution. Low-profile integral occupancy and daylight sensors are available to deliver high performance control in an Drop Lens is a light diffuser option that turns the luminaire into a decorative architecturally pleasing package. graphical statement.The diffuser drops down from the luminaire's main body of 1"and sits flush with the metal end caps.Once lit,the drop lens Integrated nLight®for system networking wired and wireless: glows vividly and offers a wider diffusion pattern. It is not available in natatorium or wet locations. NLIGHTOO AIR WIRELESS The integrated API smart sensor is part of each luminaire in Flat Blade Louvers are used to cut down on glare and better control the the nLight®AIR network,which can be grouped to control light source This option includes a linear film diffuser(inserted between multiple luminaires.The granularity of control with the digital the louvers and the LEDs),that enhances glare control and lends light PIR occupancy detection and daylight sensing makes a great sources.The standard finish is aluminum.Other colors and custom finish solution for any application.Optionally you can order nLight®AIR options available,specify RAL#or contact factory regarding custom finish less sensors for compatibility with an nLight Air wireless system. requirement.It is not available in natatorium or wet locations. The rIO,rES7,rMSOD,and rCMS models are available for integration. LED LIGHT SOURCE CONTROLS AND SYSTEM NETWORKING OPTIONS Custom manufactured linear board array uses high performance Nichia® For wired networking via Cat-5e,choose an nLight®wired LED in combination with a performance driven heat sink technology. module.The nI0 EZ PH,nIO EZDL CCT,nES7 and nCM are Tested in accordance with LM79 and LM-80;L70>60,0000hr;operated at available for integration. reduced output for high efficacy and lumen maintenance.3000K,3500K, and 4000K with 80+CRI standard;other color temperatures and 90+CRI Other manufacturer controls may be available for product available upon request,contact factory.LED color variation maintained at a integration,contact factory. 3-step MacAdam ellipse(SDCM 3x).LEDs are available in Low,Standard, and High outputs. Refer to photometry for delivered lumens. Custom output in the range of 25%to 125%of high output,contact factory. LED DIMMING DRIVER Factory tuned constant current electronic 0-10V control dimming driver is standard. Specification grade dimming down to 1%. Driver life of 50,000 hrs with ambient operating temperature range of-20°C to+50°C, maximum case temperature of 80°C.Electrical specifications at maximum driver load:PF>0.9,THD<20%,>85%Efficiency. Other available drivers a• l i g h t TECHNICAL DATA • ALIGHTS.COM E I V/E rl ICE , 06/04/2021 SAGE COURT ADDITION PAGE 57 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES N1-12 ALIGHT D5-12'-LS-30-U-*-*-*-* Recessed 12' long linear LED downlight,4.5W/ft,901m/W,80+ Verify all CRI,3000K,optics TBD,0-10V dimming,120V. lengths per plans.Verify all TBD options. D5 I TECHNICAL DATA MOUNTING WARRANTY Common recessed mounting options available. Contact factory for Limited defect-free manufactured equipment warranty provided under applications regarding modified recessed mounting conditions. normal use and proper storage for a period of one(1)year. LED products (LED boards and drivers)will be covered for a period of five(5)years.Wet Flush Gypsum Flange:Raw aluminum flange is attached to blocking(by location fixtures are not recommended for extreme wet weather conditions others),then mudded over and/or painted by installing contractor to provide and must be installed according to factory drawings;there is a modified a"flangeless"fxture appearance in recessed ceiling/wall applications. warranty for LED components installed in applications not in accordance with factory recommendations/drawings. Please refer to full terms and Trim Flange: 1/2" wide visible powder coated flange, specify finish conditions on our website. requirement.Fixture is mounted to structure using threaded rod(by others) or ceiling tie wires(provided).Use of a-clampTM secures fixture trim and housing around ceiling/wall material.Use for any gypsum or hard ceiling/ LED MODULES wall that requires a minimal flange covering the ceiling cut-out edge. Heavy-duty, milled aluminum plate module contains recessed cutouts for flush mounting of LED module(supplied).Specification and layout of T-Bar/Grid Ceiling.9/16"or 15/16"standard T-Bar or 9/16"slot ceiling. modules and lamping per LED MODULE ADDENDUM. Raw aluminum flange sits on T-Bar and is concealed from view. 4"Armstrong TechzoneTM /USG LogixrM or other 4" Utility Systems. Suitable for use in 4"on-center standard or slot T-Bar systems. STRUCTURE Robust, high quality 60% recycled aluminum extruded housing. 0.040" thick aluminum internal gear trays. Flat or flanged aluminum end caps. Aluminum joiner brackets.4 lbs/ft approximate fixture weight. FINISH Electrostatically applied powder coat finish.Standard finish options include titanium,white,and black.Other colors and custom finish options available, specify RAL#or contact factory regarding custom finish requirement. LIS TING IC Rated for IC,Airtight,CCEA Ceilings.CCEA mark applied for Chicago Plenum applications. UUCUL rated for Damp Locations. Tested in accordance with UL 1598 and certified to CEC/CSA C22.1,NEC,ANSI/ NFPA 70,and NOM-001-SEDE. UL Wet location label available.Complies with UL definition of wet locations to prevent accumulation of water on live parts,electrical components,or conductor not identified for use in contact with water through the provision of weep holes.Waterproof connector to be provided by others.Installing contractor responsible for properly sealing and waterproofing all field drilled mounting and power feed locations. alight TECHNICAL DATA • ALIGHTS.COM REc7Ivcin 06/04/2021 SAGE COURT ADDITION PAGE 58 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES N1-30 ALIGHT D5-30'-LS-30-U-KS-*-*-* Recessed 30'long linear LED downlight,4.5W/ft,901m/W, Verify all 80+ CRI,3000K,awash kicker optic,0-10V dimming,120V. lengths per plans.Verify all TBD options. D5 I SPECIFICATION GUIDE ORDERING CODE F F F'it D5 3.ST' 3.57" 3.5]' 1.00' �3.5T�L L�S H (—.5]'� 1_3. M. DROPROP LENS KICKER*WISP HE TECH"' PROJECT INFO DATE TYPE QUANTITY BASELINE PERFORMANCE(80 CRI-4000K) MOUNTING OPTIONS OUTPUT OPTICS NOMINAL LUMEN OUTPUT INPUT WATTS EFFICACY HE Tech' 762 Im/ft 9.5 W/ft �80Im/W I = WISP(AeymmetHu) 665 Im/ft 9.5 W/ft 70 Im/W II 1`. 'L x'' Drop Lens 692 Im/ft 9.5 W/ft 73Im/W (G)IFIuse Gyp/X.Lld ()MI TrImrange Louvers408 Im/ft 4.5 W/ft 90 Im/W • 'i�— .a HEE Tech' ' 408 Im/ft 4.5 W/ft 90 ImNV Lo-- WISP(Asymmetric) 333 Im/ft 4.5 W/ft 70 Im/W MIT-s*ra,s (XI lneartv,e IcIH s '*arp/,Slot 5 Drop Lens 370 Im/ft 4.5 W/ft 82 Im/W N Louvers 282 Im/ft 4.5 W/ft 62 Im/W Custom tuned output available from 25%to 125%of high output.Please consult factory for custom lumen output and wattage.'Flat Blade Louver calculated using the aluminum finish. IF ALL PRODUCT NOMENCLATURE IS LISTED WITH A QS,THIS PRODUCT IS AVAILABLE IN OUR QUICK-SHIP PROGRAM D5 SERIES LENGTH OR PATTERN TYPE OUTPUT LED CCT VOLTAGE DIRECT OPTICS D5 _ Nominal Length* LS LED Standard Output 27 2700K U Universal 120V-277V HE HE Tech" M_ Exact Length*' LH LED High Output 30 3000K 3 347V KS Awash Kicker+WISP C_ LED Custom Output* 35 3500K DL 1"Drop Lens PL_ "L"Shape*** 40 4000K LV Flat Blade Louvers* PU_ "U"Shape*** PC Polycarbonate WISP PR_ Rectangle/Square*** CP Custom Pattern**** 'Specify in feet to the nearest..(i.e.12) "Specify in Inures to the nearest vB(le.M1e0.12s) ...Specify in to me nearest uh(See P*ni*Guide for configurations) canted Design Assist /WM.1afr=25%to 125,of LED High OM Aluminum stelwera MOUNTING FINISH* DIMMING EMERGENCY G Flush Gyp/Mud Over Flange T Titanium D Standard 0-10V dimming* EC Emergency-circuited* RG 1"Regressed Gyp/Mud Over Flange W White D7 HiLume Ecosystems 1%(LDE1) E_Emergency-battery** XP 1/2"Trim Flange B Black D2 ELV 5%dimming T T-Bar 9/16" O_ Other** D3 DMX 0.1%dim-to-dark X T-Bar 15/16" D4 DALI dim-to-off N T-Bar 9/16 Slot NAIR nLight®AIR(dim-to-off)** T4 4"On Center Standard T-Bar9/16" NWIR nLight®Wired(dim-to-off)** •Not evelalstle an fixtures v 4'length.Smallest EM°WWI Is TR.II N4 4"On Center Slot T-Bar 9/16"' DO Other Dimming** entire fature is on EM circuit,no need to call "'factory-installed emergency battery peck.out ecly ee types onry .Not swab,.for Housing sightly regresses .V.Vmw.. specify a other dimmingdriverleweaeaeieontact Design Assist. xrv.see technical data for more information. SENSORS OPTIONS OC Occupancy Sensor-Ceiling MRL_ 2"LED Downlight Module* PC Photocell/Daylight Sensor-Ceiling M Multi-Circuit** OF Occupancy Sensor-Fixture N New York City Code PF Photocell/Daylight Sensor-Fixture K Natatorium Application'** OPC Occupancy&daylight Sensor-Ceiling CI Wet Location**** 90+ OPF Occupancy&daylight Sensor-Fixture CRI Chi CRI CP Chicago Plenum MRI MRI 'Specify req.'.quantity.see LED Module Addendum for additional ordering details. See...Not available with guide and contact Design Assist.Not compatible with Drop Len Flat Mode Louvers or Wolf Grazer Optics. applications/or mullion mounted applications (direct osky no edb not applications.Refer to Wet Location brochure Sensor will be matched to dimming input. and contact Design Assist for more information.Not compalible with Drop Lens,Flat Blade Louvers optics. a• 1 i g h t 3728 Maritime Way I Oceanside,CA 92056 1760.727.7675 I alights.com ®®El eldottEo Elm u Tech lensacaan arm,/ Controls Sensors RECEIVED 06/04/2021 SAGE COURT ADDITION PAGE 59 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES N1-30 ALIGHT D5-30'-LS-30-U-KS-*-*-* Recessed 30'long linear LED downlight,4.5W/ft,901m/W, Verify all 80+ CRI,3000K,awash kicker optic,0-10V dimming,120V. lengths per plans.Verify all TBD options. D5 I MOUNTING (G)I Flush Gyp/Hard Lid (XP) Trim Flange (T)I T-bar 9/16" (X)I T-bar 15/16" (N) T-bar 9/16"Slot STANDARD PATTERNS CORNER DETAIL 11111111� /J Welded corner' \_ (PLCW)I Wall to ceiling (PLWW)I Wall to wall (PLW)I Wall only r , 010 Joining pins j, (PLC)I Ceiling only (PUWW)I Wall to wall (PUWC) Wall to ceiling to wall 11116116- 111bll1 lt \► \ \r (PUW)I Wall only (PUC)I Ceiling only (PRW)I Wall only iii \_ (PRC)I Ceiling only (CP) Custom pattern a l i g h t MOUNTING ALIGHTS.COMRE! E I E D s. V 06/04/2021 SAGE COURT ADDITION PAGE 60 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES N1-30 ALIGHT D5-30'-LS-30-U-KS-*-*-* Recessed 30'long linear LED downlight,4.5W/ft,901m/W, Verify all 80+ CRI,3000K,awash kicker optic,0-10V dimming,120V. lengths per plans.Verify all TBD options. D5 I NLIGHT NLIGHT®DIMENSIONS AIR:rIO Recessed AIR:res7 Recessed 2" 3.25" // // ( 01.3" )) *Sensor and filler panne)for sensored nLight AIR only *Sensor and filler panne)for sensored nLight AIR only AIR:rPP20 WIRED:nPP16 ����ePIIIIn uIIIITry��� ��nII IIIn HIIIIITfry�� 6.45" — _ 6.45" 0 0.M ili IIIII% 3.501 3.50„ ii *Mounted on standard 4"octogonal j-box.Fits on any j-box with *Mounted on standard 4"octogonal j-box.Fits on any j-box with 5/8"knockouts 5/8"knockouts alight NLIGHT DIMENSIONS • ALIGHTS.COM ICE E I /E llt 06/04/2021 SAGE COURT ADDITION PAGE 61 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES N1-30 ALIGHT D5-30'-LS-30-U-KS-*-*-* Recessed 30'long linear LED downlight,4.5W/ft,901m/W, Verify all 80+ CRI,3000K,awash kicker optic,0-10V dimming,120V. lengths per plans.Verify all TBD options. D5 I TECHNICAL DATA LINEAR DIMENSIONS include Lutron Eco-system H-series(LDE1):Hi-IumeTM 1%LED dimming driver with Soft On,Fade to Black;and DMX and DALI protocol drivers. Elements-4',8',and 12'nominal length individual fixtures that can be Other Lutron and specialty drivers available,contact factory. joined to create continuous row lengths. Integrations-Nominal or exact lengths to the nearest 1/8th of an inch EMERGENCY available as individual fixtures or joined to create continuous row lengths, minimum fixture lengths is 12 inches. Patterns comprised of 90 degree This luminaire is provided with a factory installed LED emergency lighting precisely welded fully illuminated corners provide a multitude of geometric battery pack for both normal and emergency operation, 120-277v only. options and architectural transitions. This fixture integrated unit contains long-life Ni-Cad recyclable battery, 24 hour charger,and converter circuit.Test switch and charge indicator Custom-Contact Design Assist for modifications to product not detailed provided.Test button to be remote located within 3 feet of the luminaire,by within specification sheets. others in accordance with local code.Emergency mode provides constant power to a nominal 12W LED load for a period of 90 minutes,delivering 1200 lumens of unwavering illumination throughout the full 90 minute OPTICS emergency duration.Unless otherwise specified,the emergency battery pack will illuminate one 2 foot end in the direct portion of the fixture. HE Tech'"patented high efficacy extruded diffuse acrylic lens technology with integrated opaque white reflector delivers superior lumen output Emergency circuiting provided as a separate circuit from normal power with optimal uniform lens surface luminance for direct distribution. A circuit according to NEC requirements,specify circuit length and location. rigid partially diffuse extruded dust cover lens optimized for indirect LED performance delivers 92%transmittance. CONTROLS The a-wash kicker plus WISPY.diffuse white extruded acrylic lens produces a soft asymmetric distribution. Low-profile integral occupancy and daylight sensors are available to deliver high performance control in an Drop Lens is a light diffuser option that turns the luminaire into a decorative architecturally pleasing package. graphical statement.The diffuser drops down from the luminaire's main body of 1"and sits flush with the metal end caps.Once lit,the drop lens Integrated nLight®for system networking wired and wireless: glows vividly and offers a wider diffusion pattern. It is not available in natatorium or wet locations. NLIGHTOO AIR WIRELESS The integrated API smart sensor is part of each luminaire in Flat Blade Louvers are used to cut down on glare and better control the the nLight®AIR network,which can be grouped to control light source This option includes a linear film diffuser(inserted between multiple luminaires.The granularity of control with the digital the louvers and the LEDs),that enhances glare control and lends light FIR occupancy detection and daylight sensing makes a great sources.The standard finish is aluminum.Other colors and custom finish solution for any application.Optionally you can order nLight®AIR options available,specify RAL#or contact factory regarding custom finish less sensors for compatibility with an nLight Air wireless system. requirement.It is not available in natatorium or wet locations. The rIO,rES7,rMSOD,and rCMS models are available for integration. LED LIGHT SOURCE CONTROLS AND SYSTEM NETWORKING OPTIONS Custom manufactured linear board array uses high performance Nichia® For wired networking via Cat-5e,choose an nLight®wired LED in combination with a performance driven heat sink technology. module.The nIO EZ PH,nIO EZDL CCT,nES7 and nCM are Tested in accordance with LM79 and LM-80;L70>60,0000hr;operated at available for integration. reduced output for high efficacy and lumen maintenance.3000K,3500K, and 4000K with 80+CRI standard;other color temperatures and 90+CRI Other manufacturer controls may be available for product available upon request,contact factory.LED color variation maintained at a integration,contact factory. 3-step MacAdam ellipse(SDCM 3x).LEDs are available in Low,Standard, and High outputs. Refer to photometry for delivered lumens. Custom output in the range of 25%to 125%of high output,contact factory. LED DIMMING DRIVER Factory tuned constant current electronic 0-10V control dimming driver is standard. Specification grade dimming down to 1%. Driver life of 50,000 hrs with ambient operating temperature range of-20°C to+50°C, maximum case temperature of 80°C.Electrical specifications at maximum driver load:PF>0.9,THD<20%,>85%Efficiency. Other available drivers a• l i g h t TECHNICAL DATA • ALIGHTS.COM E I V/E rl ICE , 06/04/2021 SAGE COURT ADDITION PAGE 62 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES N1-30 ALIGHT D5-30'-LS-30-U-KS-*-*-* Recessed 30'long linear LED downlight,4.5W/ft,901m/W, Verify all 80+ CRI,3000K,awash kicker optic,0-10V dimming,120V. lengths per plans.Verify all TBD options. D5 I TECHNICAL DATA MOUNTING WARRANTY Common recessed mounting options available. Contact factory for Limited defect-free manufactured equipment warranty provided under applications regarding modified recessed mounting conditions. normal use and proper storage for a period of one(1)year. LED products (LED boards and drivers)will be covered for a period of five(5)years.Wet Flush Gypsum Flange:Raw aluminum flange is attached to blocking(by location fixtures are not recommended for extreme wet weather conditions others),then mudded over and/or painted by installing contractor to provide and must be installed according to factory drawings;there is a modified a"flangeless"fxture appearance in recessed ceiling/wall applications. warranty for LED components installed in applications not in accordance with factory recommendations/drawings. Please refer to full terms and Trim Flange: 1/2" wide visible powder coated flange, specify finish conditions on our website. requirement.Fixture is mounted to structure using threaded rod(by others) or ceiling tie wires(provided).Use of a-clampTM secures fixture trim and housing around ceiling/wall material.Use for any gypsum or hard ceiling/ LED MODULES wall that requires a minimal flange covering the ceiling cut-out edge. Heavy-duty, milled aluminum plate module contains recessed cutouts for flush mounting of LED module(supplied).Specification and layout of T-Bar/Grid Ceiling.9/16"or 15/16"standard T-Bar or 9/16"slot ceiling. modules and lamping per LED MODULE ADDENDUM. Raw aluminum flange sits on T-Bar and is concealed from view. 4"Armstrong TechzoneTM /USG LogixrM or other 4" Utility Systems. Suitable for use in 4"on-center standard or slot T-Bar systems. STRUCTURE Robust, high quality 60% recycled aluminum extruded housing. 0.040" thick aluminum internal gear trays. Flat or flanged aluminum end caps. Aluminum joiner brackets.4 lbs/ft approximate fixture weight. FINISH Electrostatically applied powder coat finish.Standard finish options include titanium,white,and black.Other colors and custom finish options available, specify RAL#or contact factory regarding custom finish requirement. LIS TING IC Rated for IC,Airtight,CCEA Ceilings.CCEA mark applied for Chicago Plenum applications. ULJCUL rated for Damp Locations. Tested in accordance with UL 1598 and certified to CEC/CSA C22.1,NEC,ANSI/ NFPA 70,and NOM-001-SEDE. UL Wet location label available.Complies with UL definition of wet locations to prevent accumulation of water on live parts,electrical components,or conductor not identified for use in contact with water through the provision of weep holes.Waterproof connector to be provided by others.Installing contractor responsible for properly sealing and waterproofing all field drilled mounting and power feed locations. alight TECHNICAL DATA • ALIGHTS.COM REc7Ivcin 06/04/2021 SAGE COURT ADDITION PAGE 63 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES Wl LUCIFER LIGHTING ISL1-1-*-80L02B-30 Wall recessed steplight,3.4W,431m,80+CRI,3000K,finish Remote driver TBD,dimming TBD,remote driver,24VDC. required.Verify all TBD options. PATH LIGHTS PROJECT NAME: TYPE: STEALTH AND IMPACT® al rug Low glare path lights lead the way through the out of doors,as built-ins or from freestanding bollards. ORDERING INFORMATION AND DRAWINGS-FIXTURE Quick Ship Product.All rough in components ship within 10 days up to quantities of 100. FC(NRE RAZING FLANGE FINISH ' LUMEN PACKAGE I CCT lr SSL1 StealthSteplight 1 Dry/Damp POWDERCOATFINISH NATURALFINISH PLATED FINISH STEALTH&IMPACT 27 2700K ISL1 Impact ti ht INon-Locking) WH White IC IndustriaLGray CH Chrome' 30 3000K P P 0 'Uxreasdlaefi J 80L02B 80+CRI,200SourceLumens 2 Wet BK Black SS BrushedStainlessSteel 35 3500K AG Satin Siker BR Brushed Bronze PB Polished Oil-Rubbed 40 4000K (Locking) SSL1 Delivemd Lumens-33 CF Architectural Fr Finish* Increased NB NaturalBmnze Bro'Ii,oeasedladtime,rrd ISL1 Delivered Lumens-43 CustomorTmp Color gel' CF Custom Fdoryt arailableturvretlomtionl ColorTemp: K Mtarealtkdayl goutomgelsassignedeipe MB Matte Oh-Robbed surtixuponreceiptaforder.tUtad Bronze' Pmdudsuppartforgudanol Increased lead time,rml aralablelarxet loationl Co LED Regressed LED with slot aperture for glare-free,energy- STEALTH ISSLiI efficient path and step lighting;suitable for dry/damp or 0—- - -\ wet applications.3.4W DC LED(dimming by powersupply). • 0 EFFECTS DEVICES _ _ • o Provided with sealed polycarbonate linear diffusion lens; O �♦ consult factory for availability of color gels,which may ♦14 pllkhii,N/- -© achieve custom color temperatures. — Q LOCKING ♦v, Discreetly hidden tamper-resistant set screws.Included with IP65 Wet location luminaire. 0 GASKET 0.94" h Foam gasket provided. Required for IP65 wet location IIIPIP\ i applications only. ©RETENTION III Torsion spring clips secure fixture into back box,mounting plate,or appropriately sized cut-out. H 1.60" J H- 1.61" 2.59" 0.125" • Available with Bollard mounting,please visit WEBSITE for additional information. • Double Impact ISL2 pathlight available,please IMPACT(ISL1) visit WEBSITE for additional information. O ♦ O -•♦ 0---�,♦ \7./4771 �1 2.75' 1.70" H 1.58" H H 1.61" 2.59" 0.125" LUCIFER® luciferlighting.com 02020 f its policy Lof continuous Company [PH]+1-210-227-4967 As parts its policy of continuous research and product development,the company [FAX]+1-210-227-4967 �� LIGHTING COMPANY reserves the right to change or withdraw specifications without prior notice. [DATE OF REV:062920201 06/04/2021 SAGE COURT ADDITION PAGE 64 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES Wl LUCIFER LIGHTING ISL1-1-*-80L02B-30 Wall recessed steplight,3.4W,431m,80+CRI,3000K,finish Remote driver TBD,dimming TBD,remote driver,24VDC. required.Verify all TBD options. PATH LIGHT STEALTH AND IMPACT SPECIFICATION GUIDE-EXAMPLES GIVEN THREE FIXTURES WITH REMOTE POWER SUPPLY L PART NUMBER QTY. SSLI-I-AB-80L02B-2 3 • °0 SSL-BB 3 PSA-24V-60-1AT2 1 THREE FIXTURES WITH :1111.• :101. INTEGRAL POWER SUPPLIES PART NUMBER QTY. 0 0 / SSL1-1-AB-80L02B-2 3 '.tom ��0 �� '�� UBB-SL1-24V-60-1AT2-HGR 3 tb:1111. �\I �\I �\I ONE FIXTURE WITH INTEGRAL POWER SUPPLY, POWERING THREE REMOTE MOUNTED FIXTURES PART NUMBER QTY. ISL1-1-AB-80L02B-2 4 �. , I UBB-SL1-24V-60-1AT2-HGR 1 ' 1 SSL-BB 3 4 -vll III ill *Quantities given are for the purposes of the examples only,max quantity of fixtures per power supply varies. LUCIFER® luciferlighting.com ©2020pert Lf its policy Lighting continuous Company [PH]+1-210-227-4967 As parts its policy of continuous research and product development,the company [FAX]+1-210-227-4967 �� LIGHTING COMPANY reserves the right to change or withdraw specifications without prior notice. [DATE OF REV:062920201 06/04/2021 SAGE COURT ADDITION PAGE 65 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES Wl LUCIFER LIGHTING ISL1-1-*-80L02B-30 Wall recessed steplight,3.4W,431m,80+CRI,3000K,finish Remote driver TBD,dimming TBD,remote driver,24VDC. required.Verify all TBD options. PATH LIGHT STEALTH AND IMPACT Mnl INTINr OPTIONS FOR REMOTE POWER SUPPLY-SELECT ONLY ONE PER FIXTURE Fixture Qty. SSL-BB SSL-BB-I1.50/1.75/2.00/2.50/3.001 WET,DRY/DAMP OR CONCRETE POUR LOCATION QTY. 1,h4 z00- tieti \o.. SSL-BB 0 m , i Back Box equipped with SSL-UMP mounting plate and gasket.Typically �, • • j used in wet and concrete pour applications.Features 1/2"knockouts. 4.69'. 4.69" SSL-BB-I1.50/1.75/2.00/2.50/3.00)0 1 •,• � i Back Box equipped with SSL-MP-X.XX mounting plate and gasket; _ IOU II. �• specify preferred depth.Typically used in wet and concrete pour loca- - �, bons.Features 1/2"knockouts. s5L-UMP ° Cotter depth vadeson , _UBB-SL1-FL-LVF-(BKT/HGRI 0 the option selected Universal Back Box,wet location and concrete pour rated.Specified ssL-MP-xxx with remote power supply and features secondary output capacity, simplifying wiring practices and reducing budgets.Supplied with UBB-SL1-FL-LVF-IBKT/HGR) mounting hardware,specify"-HGR"or"-BKT".Shown with hanger bars 1-HGRI.Hanger bars adjust from 14"to 24"for standard joist spacing.Brackets,universal stainless steel mounting flange. Jr 2.30"Sq. WET OR DRY/DAMP LOCATION I''—' 1.00" QTY. @oel• SSL-UMP 0 • b J Universal Mounting Plate typically used with two-gang switch box ��� - -°yj or 4-square junction box for dry/damp locations.May be used with customer-furnished single or two gang weatherproof box and factory 10.5" °L)II ,rm�----,- supplied gasket for wet and concrete pour locations. -----------.> �4.00" _SSL-MP-(1.50/1.75/2.00/2.50/3.O0I 0 Mounting Plate includes gasket and features an extended collar for SSL-UMP SSL-MP-(1.50/1.75/2.00/2.50/3.001 single-gang weatherproof box;specify preferred depth.Typically for wet and concrete pour locations. 40 ,oy3 ,500 SSL-SMB-Ifinish) Surface Mounting Box for interior or exterior applications,providing 2.00" flush mount of luminaire.Receives secondary wiring through back of �i zoo"sq. box.Powder coat finishes only. F/ 2.40"Sq. y DRY/DAMP LOCATION ONLY 3.t �� 5.00-' QTY. 3.90" Collar depth varies on _SSL-RM Q the option selected Remodel Mount collar for installing fixture into drywall/plasterboard. Requires Class 2 power supply. _SSL-CC 0 SSL-SMB-Ifinish] SSL-RM SSL-CC Cavity Collar for installing fixture into cavity or bore.Requires Class 2 power supply. oo z00, 3 SSL-SC3 0 tiy.. fop, Stud-mount Collar,adjusts with integral jackscrew from 1/2"to 3"for \ e � walls with varying substrate depths(rock,brick and stone).Features 1 I 1/2"knockoutsforwiring. \5.25" itee IIII �I SSL-SC6 O ��IStud-mount Collar,adjusts with integral jackscrew from 3"to 6"for / fire I 2.40"Sq. 0 Sq. walls with varying substrate depths(rock,brick and stone).Features �l 1/2"knockouts for wiring. SSL-SC3 SSL-SC6 Q� 77444Nai� 3.5`\4�2.40"Sq. 6.50.. 4 �.40"Sq. LUCIFER® luciferlighting.com 02020 Lucifers Lighting continuous Company [PH]+1-210-227-4967 ii% I\,1E As part of its policy of continuous research and product development,the company [FAX]+1-210-227-4967 �� LIGHTING COMPANY reserves the right to change or withdraw specifications without prior notice. [DATE OF REV:062920201 06/04/2021 SAGE COURT ADDITION PAGE 66 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES Wl LUCIFER LIGHTING ISL1-1-*-80L02B-30 Wall recessed steplight,3.4W,431m,80+CRI,3000K,finish Remote driver TBD,dimming TBD,remote driver,24VDC. required.Verify all TBD options. PATH LIGHT STEALTH AND IMPACT MOIINTING f1PTIf1N WITH INTFPRAI Pf1WFR SIIPPI Y-SELECT ONLY ONE PER FIXTURE WET,DRY/DAMP LOCATION,OR CONCRETE POUR LOCATION VOLTAGE POWERSUPPLY ATTACHMENT UBB-SL1-24V-60-XAT2-IBKT/HGR) UBB-SL1-24V-60 • - AT2 - I 2.30"Sq. UNIVERSALBACKBOX 1 120VAC AT2 LTF 0-10V Analog and HGR Hangar Bars '�1'. •••41� 1.00" 1.00"COLLAR 3 277VAC Leading/Trailing edge BKT ! 24VOLT OUTPUT (Supports 1-12 fixtures] Brackets 9; 60WATT ti — .1 .� 1 UBB-SL1-24V-60-XAT2-IBKT/HGR) �05 ' 11 �� Universal Back Box,wet location and concrete pour rated.Specified with integral power \ supply and features secondaryoutput capacity,simplifyingwiringpractices and reducing v 4.00" PP Y P 9 budgets.Supplied with mounting hardware,specify"-HGR"or"-BKT".Shown with hanger bars(-HGR(.Hanger bars adjust from 14"to 24"for standard joist spacing.Brackets,universal stainless steel mounting flange. REMOTE POWER SUPPLY OPTIONS WET,DRY/DAMP LOCATION,OR CONCRETE POUR LOCATION UBB-JCT-24V-60-XAT2-(BKT/HGRI VOLTAGE POWERSUPPLY ATTACHMENT UBB-JCT-24V-60 - - AT2 - 2.45" JUNCTION BOX 1 120 VAC AT2 LTF O-10V Analog and Leading/Trailingedge HGR Hangar Bars T 24 VOLT OUTPlIT (Supports 1-12 fixtures) 3.00" 60 WATT ackets -17 UBB-JCT-24V-60-XAT2-IBKT/HGR) —, ?, I UniversalJunction Box,wet location and concrete pour rated.Specified as a remote power 10.5" supply and features secondary output capacity,simplifying wiring practices and reducing 4.00" budgets.Supplied with"-HGR"or"-BKT"mounting hardware,shown with Bracket(-BKT(. Hanger bars adjust from 14"to 24"for standard joist spacing.Brackets,universal stainless steel mounting flange. PSA USED FOR AT2 DRY/DAMP LOCATION - 2.30" POWERSUPPLY Q,o alIMI � PSA-24V 4.70" f 4.0 POWERSUPPLY 40-1L22 40 Watt,120VAC,Lutron 2-Wire,Forward Phase(supports 1-10 fixtures) ASSEMBLY 24 VOLT OUTPUT 60-1AT2 60 Watt,120VAC,LTF 0-10VAnalog and Leading/Trailing edge(supports 1-12 fixtures) PSA USED FOR L22,EX2,ED3&LP1 60-3AT2 60 Watt,277VAC,LTF 0-10V Analog and Leading/Trailing edge(supports 1-12 fixtures) 66-UEX2 66 Watt,120-277VAC,eldoLED LINEARdrive,DMX(supports 1-18 fixtures( N 2.00" 66-UED3 66 Watt,120-277VAC,eldoLED LINEARdrive,DALI(supports 1-18 fixtures) j--.4Pillillbo. 96-ULP1 96 Watt,120-277VAC,Hi-fume Premier,EcoSystem/3-wire(supports 1-26 fixtures) PSA-24V-XX-XXXX 10.5" Hardwire Class 2 power supply,consists of a steel compartment and lid painted black 5.38 with integral conventional electronic power supply.Wired in either a homerun or parallel method. PSA-24V-25-1EL2 FOLLOWING POWER SUPPLY FOR DEMONSTRATION AND SAMPLING PURPOSES ONLY. NOT FOR PERMANENT INSTALLATIONS. 1.20" 1.90" ❑ PSA-24V-25-1EL2 Plug-in 120V Class 2 power supply(Supports 1 fixture] T 3.50" 1 1.10" LUCIFER® luciferlighting.com 02020 f its policy Lof continuous Company [PH]+1-210-227-4967 As parts its policy of continuous research and product development,the company [FAX]+1-210-227-4967 LIGHTING COMPANY reserves the right to change or withdraw specifications without prior notice. [DATE OF REV:06292020] 06/04/2021 SAGE COURT ADDITION PAGE 67 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT LS GROUP TYPE MANUFACTURER MODEL DESCRIPTION NOTES Wl LUCIFER LIGHTING ISL1-1-*-80L02B-30 Wall recessed steplight,3.4W,431m,80+CRI,3000K,finish Remote driver TBD,dimming TBD,remote driver,24VDC. required.Verify all TBD options. PATH LIGHT STEALTH AND IMPACT ■ TECHNICAL CONSTRUCTION Stealth:Cast 316 stainless steel or brass,depending on finish. Mounting Plates and Mounting Collars:Stainless Steel. Single-gang Weatherproof Box:Aluminum. Surface Mount Box:Aluminum. Universal Back Box:Polycarbonate. LED Proprietary 2 step MacAdam ellipse LED module available with 80+CRI in color temperatures of 2700K,3000K,3500K and 4000K.Average rated lamp life:50,000 hours. POWER SUPPLY PERFORMANCE AND DIMMING INFORMATION PowerSuppty AT2 l22 LP1 E42 ED3 Minimum°C -20°C 0°C 0°C -20°C -20°C Maximum°C 50°C 40°C 40°C 50°C 50°C Dimming% 10.0% 1.0% 0.1% 0% 0% Note: For L22 and LP1 drivers consult chart on page 5 to confirm appropriate dimming curve for compatibility with selected control. RECOMMENDED SPACING Optimum 18"(457mm)above walking surface;36"(914mm1 on-center spacing. ELECTRICAL Luminaire requires factory-supplied 24-Volt DC power supply. May be integral to back box or remote.Secondary run lengths vary depending on power supply specified,see installation guidelines for run lengths. LISTING cTUVus Listed;Dark-Sky Compliant;Patent No.US D610,734 S;Dry/ Damp (IP54 rated)and Wet(IP65 rated)location. WARRANTY Manufacturer's 1-year warranty guarantees product(s) listed to be free from defects in material and workmanship under normal use and service.5-year warranty on LED and power supply to operate with 70% of the original flux and remain within a range of 3 duv.Warranty period begins from the date of shipment by Seller and conditional upon the use of manufacturer-supplied power supply.Consult website for full warranty terms and conditions. LUCIFER® luciferlighting.com ©2020 Luciferi Lighting Company [PH]+1-210-227-4967 As part esfits right tofhange or wthdraresandproduct development,the company [FAX]+1-210-227-4967 LIGHTING COMPANY reserves the right to change or withdraw specifications without prior notice. [DATE OF REV:062920201 06/04/2021 SAGE COURT ADDITION PAGE 68 OF 87 2021.05.03 PERMIT ASPEN BUILDING DEPARTMENT