Loading...
The URL can be used to link to this page
Your browser does not support the video tag.
Home
My WebLink
About
Application.117 Neale.2021
ATTACHMENT 2 - Historic Preservation Land Use Application PROJECT: Name: Location: (Indicate street address, lot & block number or metes and bounds description of property) Parcel ID # (REQUIRED)___________________________________________________________ APPLICANT: Name: Address: Phone #: _______________________Fax#:___________________E-mail:_____________________ REPRESENTATIVE: Name: Address: Phone #: _______________________Fax#:___________________E-mail:______________________ TYPE OF APPLICATION: (please check all that apply): Historic Designation Certificate of No Negative Effect Certificate of Appropriateness -Minor Historic Development -Major Historic Development -Conceptual Historic Development -Final Historic Development -Substantial Amendment Relocation (temporary, on or off-site) Demolition (total demolition) Historic Landmark Lot Split EXISTING CONDITIONS: (description of existing buildings, uses, previous approvals, etc.) PROPOSAL: (description of proposed buildings, uses, modifications, etc.) Aspen Historic Preservation Land Use Application Requirements, Updated: May 29, 2007 City of Aspen Community Development Department Aspen Historic Preservation Land Use Packet City of Aspen | 130 S. Galena Street. | (970) 920 5090 Historic Land Use Application Requirements, Updated: March, 2020 KEY 1. Contained within a letter signed by the applicant, the applicant's name, address and telephone number, and the name, address, and telephone number of any representative authorized to act on behalf of the applicant. 2. The street address, legal description, and parcel identification number of the property proposed for development. 3. A disclosure of ownership of the parcel proposed for development, consisting of a current certificate from a Title insurance company, or attorney licensed to practice in the State of Colorado, listing the names of all owners of the property, and all mortgages, judgments, liens, easements, contracts and agreements affecting the parcel, and demonstrating the owner's right to apply for the Development Application. 4. An 8 1/2" x 11" vicinity map locating the subject parcel within the City of Aspen. 5. A site plan depicting the proposed layout and the project’s physical relationship to the land and its surroundings. 6. A site improvement survey certified by a registered land surveyor, licensed in the State of Colorado, showing the current status of the parcel including the current topography and vegetation. (This requirement, or any part thereof, may be waived by the Community Development Director if the project is determined not to warrant a survey document.) 7. A written description of the proposal and a written explanation of how the proposed development complies with the review criteria and The City of Aspen Historic Preservation Design Guidelines relevant to the development application. 8. Additional materials, documentation, or reports as deemed necessary by the Community Development Director. 9. Completed Land Use Application Form, Signed Fee Agreement, and Fee. 10. Dimensional Requirement Form. 11. Site or historic district boundary map. 12. Property or district description including narrative text, photographs and/or other graphic materials that document its physical characteristics. 13. Identification of the character-defining features that distinguish the entity which should be preserved. 14. Verification that the proposal complies with Section 26.410, Residential Design Standards, or a written request for a variance from any standard that is not being met. 15. Photographs, building material samples and other exhibits, as needed, to accurately depict location, extent and design of the proposed work. 16. An accurate representation of all major building materials and finishes to be used in the development, depicted through samples or photographs. 17. Scaled elevations and/or drawings of the proposed work and its relationship to the designated historic buildings, structures, sites and features in its context. 18. Scaled drawings of the proposed structure(s) or addition(s) depicting their form, including their height, massing, scale, proportions and roof plan; and the primary features of all elevations in the neighborhood context. 19. Supplemental materials to provide a visual description of the context surrounding the designated historic property or historic district including at least one (1) of the following: diagrams, maps, photographs, 3- D model (digital or physical) or streetscape elevations. 20. Preliminary selection of primary building materials to be used in construction represented by samples and/or photographs. 21. A statement, including narrative text or graphics, indicating how the Final Development Plan conforms to representations made or stipulations placed as a condition of the approval of the Conceptual Development Plan. 22. Final drawings of all proposed structures(s) and/or addition(s) included as part of the development at ¼” = 1.0’ scale 23. A revised site plan 24. Revised scaled elevations and drawings 25. Photographs and other exhibits to illustrate the proposed changes. 26. Written documentation that the Chief Building Official has determined the building an imminent hazard, or narrative text, graphic illustrations or other exhibits that provide evidence that the building, structure or object is of no historic or architectural value or importance. 27. A written description and/or graphic illustrations of the building, structure or object proposed for relocation. 28. A written explanation of the type of relocation requested (temporary, on-site or off-site) and justification for the need for relocation. 29. A written report from a licensed engineer or architect regarding the soundness of the building, structure or object, its ability to withstand the physical move and its rehabilitation needs, once relocated. 30. A conceptual plan for the receiving site providing preliminary information on the property boundaries, existing improvements and site characteristics and the associated planned improvements. 31. Evidence of the financial ability to undertake the safe relocation, preservation and repair of the building, structure or object; site preparation and construction of necessary infrastructure through the posting of bonds or other financial measures deemed appropriate. 32. Supplementary materials to provide an understanding of the larger context for the relocated property and its impact on adjacent properties, the neighborhood or streetscape. 33. If the applicant does not own the receiving site, proof from the site’s property owner of the willingness to accept the relocated building, structure or object. 34. Evidence that the applicant has or is seeking the necessary approvals to place the building on the identified receiving site. If the site is outside of the city limits, verification that the building will be preserved on its new site through a formal action of the other jurisdiction or a preservation easement. 35. A written description of how the property does not meet these criteria for designation. 36. A lighting plan indicating the location of all exterior light fixtures and site lighting, and cut sheets for each type of fixture proposed. Light fixtures must comply with the "City of Aspen Historic Preservation Design Guidelines" and meet the City Lighting Code. City of Aspen Community Development Department Aspen Historic Preservation Land Use Packet City of Aspen|130 S. Galena Street.| (970) 920 5090 Historic Land Use Application Requirements, Updated: April 2020 Agreement to Pay Application Fees An agreement between the City of Aspen (“City”) and Property Phone No.: Owner (“I”): Email: Address of Billing Property: Address: (Subject of (send bills here) application) I understand that the City has adopted, via Ordinance No., Series of 2011, review fees for Land Use applications and payment of these fees is a condition precedent to determining application completeness. I understand that as the property owner that I am responsible for paying all fees for this development application. For flat fees and referral fees: I agree to pay the following fees for the services indicated. I understand that these flat fees are non-refundable. $ 81.00 flat fee for Certificate of No Negative Effect $____________flat fee for ____________________________________ $___________ flat fee for ___________________ $_____________ flat fee for____________________________________ For Deposit cases only: The City and I understand that because of the size, nature or scope of the proposed project, it is not possible at this time to know the full extent or total costs involved in processing the application. I understand that additional costs over and above the deposit may accrue. I understand and agree that it is impracticable for City staff to complete processing, review and presentation of sufficient information to enable legally required findings to be made for project consideration, unless invoices are paid in full. The City and I understand and agree that invoices mailed by the City to the above listed billing address and not returned to the City shall be considered by the City as being received by me. I agree to remit payment within 30 days of presentation of an invoice by the City for such services. I have read, understood, and agree to the Land Use Review Fee Policy including consequences for no-payment. I agree to pay the following initial deposit amounts for the specified hours of staff time. I understand that payment of a deposit does not render and application complete or compliant with approval criteria. If actual recorded costs exceed the initial deposit, I agree to pay additional monthly billings to the City to reimburse the City for the processing of my application at the hourly rates hereinafter stated. $________________ deposit for_____________ hours of Community Development Department staff time. Additional time above the deposit amount will be billed at $325.00 per hour. $________________ deposit for _____________ hours of Engineering Department staff time. Additional time above the deposit amount will be billed at $325.00 per hour. Property Owner: _______________________________________________ City of Aspen: ________________________________ Phillip Supino, AICP Community Development Director Name: _______________________________________________ Title: ____________________________________________________ City Use: Fees Due: $____Received $_______ COMMUNITY DEVELOPMENT DEPARTMENT October, 2013 City of Aspen | 130 S. Galena St. | (970) 920-5090 Homeowner Association Compliance Policy All land use applications within the City of Aspen are required to include a Homeowner Association Compliance Form (this form) certifying the scope of work included in the land use application complies with all applicable covenants and homeowner association policies. The certification must be signed by the property owner or Attorney representing the property owner. Property Owner (“I”): Name: Email: Phone No.: Address of Property: (subject of application) I certify as follows: (pick one) □ This property is not subject to a homeowners association or other form of private covenant. □ This property is subject to a homeowners association or private covenant and the improvements proposed in this land use application do not require approval by the homeowners association or covenant beneficiary. □ This property is subject to a homeowners association or private covenant and the improvements proposed in this land use application have been approved by the homeowners association or covenant beneficiary. I understand this policy and I understand the City of Aspen does not interpret, enforce, or manage the applicability, meaning or effect of private covenants or homeowner association rules or bylaws. I understand that this document is a public document. Owner signature: _________________________ date:___________ Owner printed name: _________________________ or, Attorney signature: _________________________ date:___________ Attorney printed name: _________________________ 04.20.2021 David Harris Land Title Guarantee Company Customer Distribution PREVENT FRAUD - Please remember to call a member of our closing team when initiating a wire transfer or providing wiring instructions. Order Number:QPR62012719 Date: 04/22/2021 Property Address:117 NEALE AVE, ASPEN, CO 81611 PLEASE CONTACT YOUR CLOSER OR CLOSER'S ASSISTANT FOR WIRE TRANSFER INSTRUCTIONS For Closing Assistance For Title Assistance Roaring Fork Valley Title Team 533 E HOPKINS #102 ASPEN, CO 81611 (970) 927-0405 (Work) (970) 925-0610 (Work Fax) valleyresponse@ltgc.com Buyer/Borrower DAVID E HARRIS AND PATRICIA HARRIS Delivered via: Electronic Mail This Report is based on a limited search of the county real property records and provides the name(s) of the vested owner(s), the legal description and encumbrances, which, for the purposes of this report, means deed of trust and mortgages, and liens recorded against the property and the owner(s) in the records of the clerk and recorder for the county in which the subject is located. This Report does not constitute any form of warranty or guarantee of title or title insurance. The liability of Land Title Guarantee Company is strictly limited to (1) the recipient of the Report, and no other person, and (2) the amount paid for the report. Applicant: DAVID HARRIS Registered Owner: DAVID E. HARRIS AND PATRICIA HARRIS Address: 117 NEALE AVE, ASPEN, CO 81611 Legal Description: LOT 2, BENEDICT CABIN SUBDIVISION EXEMPTION, ACCORDING TO THE PLAT RECORDED JULY 23, 2012 IN PLAT BOOK 100 AT PAGE 42. COUNTY OF PITKIN, STATE OF COLORADO. Date Posted Thru: 04/09/2021 at 5:00 P.M. We find the following documents of record affecting subject property: 1.WARRANTY DEED RECORDED JULY 08, 2013 UNDER RECEPTION NO. 600938. 2.BARGAIN & SALE DEED RECORDED NOVEMBER 20, 2017 UNDER RECEPTION NO. 643260. 3.QUIT CLAIM DEED RECORDED OCTOBER 23, 2018 UNDER RECEPTION NO. 651385. 4.DEED OF TRUST RECORDED DECEMBER 23, 2019 UNDER RECEPTION NO. 661414. Land Title Guarantee Company Limited Property Report Order Number:QPR62012719 ACAPS No.: To Whom it May Concern: Please accept this letter as my certification, as the owner of BENEDICT CABIN SUB EXEMPTION LOT:2. The property’s street address is 117 Neale Street. The parcel ID is: 273707353004. My information is as follows: David Harris 117 Neale Street, Aspen CO 81611 (970) 379-1513 I am authorized to submit any development application on the property as well as to authorize others to do so on behalf of this property. I hereby authorize Ryan Doremus of Thunderbowl Architects to submit our application for development upon this property. Please advise me if you need anything further in this regard. Yours very truly, 05.03.2021 (a) 300 S. Spring Street, Suite 201 Aspen, CO 81611 (c) Ryan 970.274.1421 & Matthew 970.618.1645 (w) www.thunderbowlarchitects.com Date:04/15/2021 HPC SCOPE NARRATIVE Project: 117 NEALE STREET HPC Scope Narrative The purpose of this narrative is to explain the proposed changes to an existing window located in the historic portion of the historic cabin. We are proposing removing the existing non-historic window with a bay window that would extend out beyond the face of the building by 3’-0”. The window would fit in the existing opening and would be glazed on 3 sides. (a) 300 S. Spring Street, Suite 201 Aspen, CO 81611 (c) Ryan 970.274.1421 & Matthew 970.618.1645 (w) www.thunderbowlarchitects.com n n m rs B �- MIQLANaiPARh{ RL r� V oll LEGEND SIDEWALK EASEMENT --- REVOCABLE ENCROACHMENT LICENSE G+.n' ©o .a 0 G bGS9a m O cn Y 4 y o e1 Lo Z z o� sn � MARKED qQ 06` F OUNp AI I \ C SplP 2A'S CORN�"R M REp p � N 7 �'4V j612� ,s SUR p05 �`ON EL RO© AR,��O W OVNp S P psi CS CAP 5 OR S �lELCOA 2376 `S SUj 6EA7 R '?C)s0 ON CORNS NERROjjjkY ofp1Sp N C� grtE_CI \C CAp 8- AS F outAv E�_\'o* NE 9 8 a WITH pyp , W 0 SA��;4S SUR1 �OR'S CORNER DOS, or oG O LL Z O -o X W J � m oc � o 0 3 -c m = t r�- O r v �Z r m LOT 2 BENEDICT "**� **111*� SCALE I- - 10' 0 10 20 30 NOTICE: ACCORDING TO COLORADO LAW YOU MUST COMMENCE ANY LEGAL LOUIS H. BUETTNER SURVEYING ACTION BASED UPON ANY DEFECT IN THIS SURVEY WITHIN THREE YEARS 0040 WEST SOPRIS CREEK ROAD AFTER YOU FIRST DISMVERED SUCH DEFECT. IN NO EVENT. MAY ANY BASALT, COLORADO 8W ACTION BASED UPON ANY DEFECT IN THIS SURVEY BE COMMENCED MORE 970-927-36K THAN TEN YEARS FROM THE DATE OF THE CERTIFICATION 940M HEREON. tk 9 ' r WI H 131 d SET 5/8" STEEL ROD WITH YELLOW PLASTIC CAP MARKED BUETTNER 13166 fk.1.4ABIN SUBDIVISION EXEMPTION f* SOUTHEAST QUATER, SOUTHWEST QUATER, SECTION 7 TOWNSHIP 10 SOUTH, RANGE 84 WEST OF THE SIXTH PRINCIPAL MERIDIAN CITY OF ASPEN PITKIN COUNTY, COLORADO THE PURPOSE OF T#4S SURVEY WAS TO ESTABLISH OR REESTABLISH PROPERTY ANGLE POINT NOT ESTABLISHED OR LOST PROPERTY DESCRIPTION LOT 2, BENEDICT CABIN SUBDIVISION EXEMPTION. FQQ 04 ©�a� zo 'V° P...,.,,,,, ..+..... S 7.:..;�� f4 - E 17E 17 ir{ N 70*0*14• W I& " OW S18'34 ��"W\ 8.77'-. EXMUSIYE PARIaW "MARNT FOR LOT 2 1D' `W'4L — 8' � r Op A p _DpE R, gZE M U,NO SpCAST1C�G�NA�ON 257 5 S�BD 1 S pEg0ER FOR �N1 CORN OL p0 COKTR N ,0 3 M END OF FENCE wte A 1.7• CASgN 2' SET HAS_ 3 YELLOW PLASTIC TAG\ IN RALROAD TIE MAN= YUETTtER `., tgklW FOR PAOPENTY CONGER LOT AREA 3.040.13017 •q fH. approx. or O.O'II owns approx. i �r `•_ ft-oft /TELEPHONE 65° 5 l ' 21 - W 54. 19 .....,,. -` RE ET WITNESS CORNER YELLOW PLASTIC TAG 51 MARKED BUETTNER 13166 WC TE,, dA,d� , S 65`21'53" E 2.65' Of TRUE 1t5�140,IXp 6AG11 gQ CORNER OWNER RELINQUISHES INTEREST IN SET 5/8" STEEL ROD WITH EXISTING SOLID BOARD FENCE TO THE YELLOW PLASTIC CAP CITY OF ASPEN. MARKED BUETTNER 13166 M m � 8R� CEM CNA�`ES at µIDLE, Sok AYE.• Sp CA CO 8*11 Li ZD Lu Li LJ J ,Q z SIDEWALK EASEMENT 41A, SNEKEO Np,t L Ns O'AAA F 0\� ���iCP, 613 P OP Ot_ pOtN� 03 1 R PR �Colm T ti c, PROSIDEW m$ AS PIS fi yI 4F r• 0 efgry�4 r NOTES 1. AN ORIGINAL PLAT (MAP) PRINT PREPARED AS A PICTORIAL REPORT OF SURVEY BEARS AN ORIGINAL (INK) SIGNATURE AND SURVEYOR'S SEAL. REPRODUCTION COPIES OF A PLAT (MAP) PRINT SHOWING SURVEYOR'S SIGNATURE AND SEAL MAY CONTAIN FRAUDULENT, INCORRECT, ERRONEOUS, OR MISLEADING INFORMATION. POSSESSION OF SUCH REPRODUCTION COPIES AND THE USE OF THE INFORMATION THEREON IS UNAUTHORIZED BY SURVEYOR. DOCUMENTS PREPARED BY SURVEYOR AND WITHOUT A SIGNATURE AND SEAL ARE TO BE VIEWED AS PRELIMINARY WITH ALL INFORMATION SHOWN SUBJECT TO CHANGE. 2. THE BASIS OF BEARINGS AND LOCATION FOR THIS SURVEY WAS THE FOUND MONUMENTATION AT THE EASTERLY CORNER AND THE ANGLE POINT ON THE EASTERLY BOUNDARY OF THE ORIGINAL LOT 2, SHOAF'S WATERFALL SUBDIVISION. THESE MONUMENTS ARE MARKED AND DESCRIBED HEREON AS CONTROL POINTS. THE BASIS FOR THE ELEVATION CONTOURS SHOWN HEREON IS AN ELEVATION OF 7923.44 ON TOP OF THE FOUND ORIGINAL EASTERLY LOT 2 CORNER MONUMENT SHOWN HEREON AS A CONTROL POINT. THIS ELEVATION WAS BASED ON THE COAST AND GEODETIC VERTICAL CONTROL MONUMENT Q159 LOCATED IN THE SOUTHWESTERLY CORNER OF THE PITKIN COUNTY COURT HOUSE YARD. 3. THIS SURVEY DOES NOT CONSTITUTE A TITLE SEARCH BY SURVEYOR TO DETERMINE TITLE OR EASEMENTS OF RECORD. RESEARCH FOR THIS SURVEY WAS PERFORWD IN ACCORDANCE WITH COLORADO REVISED STATUTES 38-51-MG AND THE RULES OF PROCEDURE AND BOARD POLICY STATEMENTS OF THE STATE BOARD OF LICENSURE FOR ARCHITECTS. PROFESSIONAL ENGINEERS AND PROFESSIONAL LAND SURVEYORS, SPECIFICALLY THOSE BOARD RULES AND POLICY STATEMENTS RELATING TO THE DEPICTION OF EASEMENTS AND RIGHT-OF-WAY ON SURVEY PLATS. THE TITLE COMMITMENT NUMBER 0703293-C FROM TITLE COMPANY OF THE ROCKIES, DATED JUNE 29, 2011, AT 7:00 A.M. WAS RELIED UPON FOR ALL INFORMATION REGARDING EASEMENTS, RIGHTS -OF -WAY. TITLE, AND CIVIL COURT ACTIONS OF RECORD. 4. THIS PROPERTY IS LOCATED ON THE PITKIN COUNTY, COLORADO AND INCORPORATED AREAS, NATIONAL FLOOD INSURANCE PROGRAM, FLOOD INSURANCE RATE MAP DATED JUNE 4, 1987, COMMUNITY -PANEL NUMBER 08097 CO 204 C. THE PROPERTY IS WITHIN THE ZONE "X", OR IN THE AREA OUTSIDE THE 500-YEAR FLOOD PLAIN. 5. THE TREES SHOWN HEREON ARE LABELED SIZE IN INCH SPECIE AND APPROXIMATE DRIP LINE IN FEET. EX. 8" COTTONWOOD 20'. 6. THE OWNER AT THE TIME OF ESTABLISHMENT OF THE BENEDICT SUBDIVISION EXEMPTION GRANTED A PERMANENT SIDEWALK EASEMENT TO THE CITY OF ASPEN AND AGREED TO CONDITIONS AND OBLIGATIONS WITH REGARDS TO THE SIDEWALK. TIE TO CITY OF ASPEN GPS NAVD 88 MONUMENT NO. 4 S 20' 49' 24" W 732.74' TIE TO CITY OF ASPEN GPS NAVD 88 MONUMENT NO. 1 S 17' 20' 03" W 1609.22' PICKET FENCE HAS A REVOCABLE ENCROACHMENT RECORDED AS RECEPTION NO. 590742 N In 9 490 1 , /M X PE STAL • SURVEYOR'S CERTIFICATE I, LOUIS H. BUETTNER, A REGISTERED LAND SURVEYOR IN THE STATE OF COLORADO. DO HEREBY CONFIRM THAT THIS SURVEY PLAT WAS MADE FROM FIELD NOTES OF A SURVEYS OF 2000, 2001, AND 2012 OF THE ABOVE DESCRIBED PROPERTY MADE BY MYSELF, OR UNDER MY DIRECT RESPONSIBILITY, SUPERVISION, AND CHECKING. THE MONUMENTAT#ON SHOWN HEREON FOR THE PROPERTY ANGLE POINTS WAS FOUND OR SET DURING THESE SURVEYS. ALL DIMENSIONS AND SHOWN HEREON ARE CORRECT TO THE BEST OF MY KNOWLEDGE. `j LOUIS H. B -TT ID DATE��--------®- ° rNo k f4 .1. b�A^ SURVEY FILING CERTIFICATE DEPOSITED THIS ----- DAY OF ______________, 20_-_, AT -----_, -_M, IN SURVEY BOOK ------- OF THE PITKIN COUNTY LAND SURVEY PLATS/RIGHT-OF-WAY SURVEYS AT PAGE ------ RECEPTION NUMBER----------------------------------- ---------------------• - J •„ . f It ,ArtY S F 4 ���,► 1 1 �1I ,a 1* 6 87.72 SQ. FT. LOFT AREA BELOW 30" IN HEIGHT LOFT FLOOR PLAN LIVING HEATED SQUARE FOOTAGE LOWER LEVEL 629.13 SF MAIN LEVEL 438.46 SF LOFT LEVEL 87.42 SF TOTAL SF 1,155.01 SF 629.13 SQ. FT.438.46 SQ. FT. LAUNDRY BEDROOM CLOSET CO P Y R I G H T 2 0 2 0 T H U N D E R B O W L A R C H I T E C T S AS P E N , C O PA R C E L I D # 2 7 3 7 0 7 3 5 3 0 0 4 11 7 N E A L E A V E . C TH U N D E R B O W L AR C H I T E C T S THUNDERBOWL ARCHITECTS 300 S. SPRING ST. SUITE 201 ASPEN, CO 81611 (970) 710-2938 DATE 08/06/2020 DOOR REPLACEMENT PROJECT SCALE 1/4" = 1'-0" Z-100 LIVING HEATED SF CALCS 87.72 SQ. FT. LOFT AREA BELOW 30" IN HEIGHT LOFT FLOOR PLAN LIVING HEATED SQUARE FOOTAGE LOWER LEVEL 629.13 SF MAIN LEVEL 463.36 SF LOFT LEVEL 87.42 SF TOTAL SF 1,179.91 SF 629.13 SQ. FT.463.36 SQ. FT. LAUNDRY BEDROOM CLOSET CO P Y R I G H T 2 0 2 0 T H U N D E R B O W L A R C H I T E C T S AS P E N , C O PA R C E L I D # 2 7 3 7 0 7 3 5 3 0 0 4 11 7 N E A L E A V E . C TH U N D E R B O W L AR C H I T E C T S THUNDERBOWL ARCHITECTS 300 S. SPRING ST. SUITE 201 ASPEN, CO 81611 (970) 710-2938 DATE 08/06/2020 DOOR REPLACEMENT PROJECT SCALE 1/4" = 1'-0" Z-101 PROPOSED FAR CALCS WINDOW TO BE REPLACED. EXISTING ROUGH OPENING TO BE USED. SEE MANUFACTURERS SPECS. FOR NEW WINDOW INFORMATION. AREA OF WORK CO P Y R I G H T 2 0 2 0 T H U N D E R B O W L A R C H I T E C T S AS P E N , C O PA R C E L I D # 2 7 3 7 0 7 3 5 3 0 0 4 11 7 N E A L E A V E . C TH U N D E R B O W L AR C H I T E C T S THUNDERBOWL ARCHITECTS 300 S. SPRING ST. SUITE 201 ASPEN, CO 81611 (970) 710-2938 DATE 08/06/2020 DOOR REPLACEMENT PROJECT SCALE 1/4" = 1'-0" A-101 MAIN LEVEL FLOOR PLAN N 0 2 4 8 Scale: 1/4" = 1'-0" N TRUE MAIN LEVEL FLOOR PLAN 1/4" = 1'-0" 1 A-101 MAIN LEVEL FLOOR PLAN 1/4" = 1'-0" 1 A-101 ff mr maw . 0 mW 1 } * ff F f - 57 S' f 1 � i G ' �.� �• •F� non f�. ;• _ - . , y- J'4 * vi rF �{ f l Air may' All IrA ���.pyy . r•1L " F �# ' ,�''t r - 1 , # � - a 'F a. .l JIF _ y iw F + ib nnnnnnnnnmm � � � �p III:IIII.III:lllllllllllllllllll.11l...!I � ', ', ', dIlIlk r 1 Marc Jacops From:Ryan Doremus Sent:Friday, December 14, 2018 12:06 PM To:Marc Jacops Subject:FW: 1320 Mountain View - HOA Package and Consultant Backgrounds Attachments:La Cantina Doors.pdf RYAN DOREMUS THUNDERBOWL I ARCHITECTS (a) 300 Spring Street, Suite 201 Aspen, CO 81611 (c) 970.274.1421 (e) ryan@thunderbowlarchitects.com (w) thunderbowlarchitects.com ABOUT THIS E-MAIL: The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential material. Any review, retransmission, dissemination or other use of this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from any computer. Please consider the environment before printing this e-mail From: Steve Waldeck <steve@steeplechaseconstruction.com> Sent: Tuesday, December 04, 2018 5:54 PM To: 'Ryan Doremus' <ryan@thunderbowlarchitects.com> Subject: RE: 1320 Mountain View - HOA Package and Consultant Backgrounds Ryan, See below in Bold. I’ll get a cut sheet for recessed LED can light tomorrow. 1. Expected performance of window assemblies – U-value, SHGC, etc a)La Cantina Sliding glass doors and bi-folding doors. See attachment with specs. b)Pella Window: Architect Reserve, Single Hung, 29.5 X 77 Final Wall Depth: 3-11/16" Frame Size: 29 1/2 X 77 General Information: Standard, Luxury, Wood, Pine, 4 3/8", 4 3/16" Exterior Color / Finish: Primed, Primed Wood Interior Color / Finish: Unfinished Interior Sash / Panel: Putty Glaze, Ogee, Standard, No Sash Lugs Glass: Insulated Dual Low-E AdvancedComfort Low-E Insulating Glass Air Filled High Altitude Hardware Options: Cam-Action Lock, Matte Black, No Window Opening Control Device, No Limited Opening Hardware, Order Sash Lift, No Integrated Sensor Screen: Half Screen, Standard EnduraClad, White, Standard, InView™ Performance Information: U-Factor 0.27, SHGC 0.28, VLT 0.52, CPD PEL-N-234-00289-00001, Performance Class CW, PG 45, Calculated Positive DP Rating 45, Calculated Negative DP Rating 45, Year Rated 08|11, Egress Meets Typical 5.7 sqft (E) (United States Only) Grille: No Grille, Wrapping Information: No Exterior Trim, 4 3/16", 4 3/8", Factory Applied, Pella Recommended Clearance, Perimeter Length = 213". c)Pella Sliding Glass Door Architect, Double Sliding Door, Contemporary, Vent Right / Fixed, 104 X 110, Brown 1: Non-Standard SizeNon-Standard Size Vent Right / Fixed Double Sliding Door Frame Size: 104 X 110 General Information: Knock Down, Standard, Clad, Pine, 5 7/8", 4 9/16", Black Composite Threshold Exterior Color / Finish: Standard Enduraclad, Brown Proposal - Detailed Fax:Phone: Sales Rep E-Mail:kwolf@pellacolorado.com Pella Window and Door Showroom of Denver Denver, CO 80239 (303) 371-3750 (303) 371-4268 4200 Carson Street Sales Rep Name:Wolf, Kyle Sales Rep Phone:970-309-7272 Sales Rep Fax: Customer Information Project/Delivery Address Order Information Primary Phone: Mobile Phone: Fax Number: E-Mail: Contact Name: County: Owner Name: Owner Phone: Order Number: Quote Number: Quote Name: Cust Delivery Date: Quoted Date: Order Type: Payment Terms: Customer PO #: 117 Neale Avenue 5/27/21 042 (970) 710-2938 Thunderbowl Architects 300 S Spring St Ste 201 ASPEN, CO 81611-2806 Deposit/C.O.D. Non-Installed Sales (970) 710-2938 Thunderbowl Architects 117 Neale Avenue PITKIN 14142429 5/27/2021 ASPEN, CO 81611 Booked Date: None Lot # Wall Depth:0' 3 11/16" Contracted Date:Great Plains #:1004911524 Tax Code:PT2 Customer Number: Customer Account:1004911524 1008892521 12of1PagePrinted on Detailed Proposal For more information regarding the finishing, maintenance, service and warranty of all Pella® products, visit the Pella® website at www.pella.com 5/27/2021 Customer:Quote Number:Project Name:Thunderbowl Architects 117 Neale Avenue 14142429 Location: Rough Opening: Attributes Viewed From Exterior Line # Qty 1 None Assigned 25 - 3/4" X 96 - 3/4" Pella® Reserve, Contemporary, Awning, Architect Reserve, Direct Set Fixed Frame Rectangle, 25 X 96, Black Final Wall Depth:0' 3 11/16" 10 1: Contemporary, 2517 Vent Awning Frame Size: 25 X 17 General Information: Standard, Clad, Pine, 5", 3 11/16" Exterior Color / Finish: Painted, Standard Enduraclad, Black Interior Color / Finish: Unfinished Interior Sash / Panel: Square, Square, Standard, 1.46, 1.46, 1.46 Glass: Insulated Dual Low-E AdvancedComfort Low-E Insulating Glass Air Filled High Altitude Hardware Options: Wash Hinge Hardware, Saldo Fold-Away Crank, Matte Black, No Limited Opening Hardware, No Integrated Sensor, Right Jamb Screen: Full Screen, Black, InView™ Performance Information: U-Factor 0.28, SHGC 0.25, VLT 0.47, CPD PEL-N-30-13238-00001, Performance Class CW, PG 50, Calculated Positive DP Rating 50, Calculated Negative DP Rating 50, Year Rated 11, Egress Not Applicable Grille: No Grille, Horizontal Mull 1: FactoryMull, Standard Joining Mullion, Frame To Frame Width- 0", Mull Design Pressure- 20 2: Contemporary, 2579 Fixed Frame Direct Set Frame Size: 25 X 79 General Information: Interior Glazed, Factory Assembled, Standard, Clad, Pine, 5", 3 11/16" Exterior Color / Finish: Painted, Standard Enduraclad, Black Interior Color / Finish: Unfinished Interior Glass: Insulated Dual Low-E AdvancedComfort Low-E Insulating Glass Air Filled High Altitude Performance Information: U-Factor 0.27, SHGC 0.32, VLT 0.60, CPD PEL-N-18-02772-00001, Performance Class CW, PG 40, Calculated Positive DP Rating 40, Calculated Negative DP Rating 40, Year Rated 08|11 Grille: No Grille, Wrapping Information: Foldout Fins, Factory Applied, No Exterior Trim, 3 11/16", 5", Factory Applied, Pella Recommended Clearance, Perimeter Length = 242". PK # 2089 12of2PagePrinted on Detailed Proposal For more information regarding the finishing, maintenance, service and warranty of all Pella® products, visit the Pella® website at www.pella.com 5/27/2021 Customer:Quote Number:Project Name:Thunderbowl Architects 117 Neale Avenue 14142429 Location: Rough Opening: Attributes Viewed From Exterior Line # Qty 1 None Assigned 25 - 3/4" X 96 - 3/4" Pella® Reserve, Contemporary, Awning, Architect Reserve, Direct Set Fixed Frame Rectangle, 25 X 96, Black Final Wall Depth:0' 3 11/16" 15 1: Contemporary, 2517 Vent Awning Frame Size: 25 X 17 General Information: Standard, Clad, Pine, 5", 3 11/16" Exterior Color / Finish: Painted, Standard Enduraclad, Black Interior Color / Finish: Unfinished Interior Sash / Panel: Square, Square, Standard, 1.46, 1.46, 1.46 Glass: Insulated Dual Low-E AdvancedComfort Low-E Insulating Glass Air Filled High Altitude Hardware Options: Wash Hinge Hardware, Saldo Fold-Away Crank, Matte Black, No Limited Opening Hardware, No Integrated Sensor, Left Jamb Screen: Full Screen, Black, InView™ Performance Information: U-Factor 0.28, SHGC 0.25, VLT 0.47, CPD PEL-N-30-13238-00001, Performance Class CW, PG 50, Calculated Positive DP Rating 50, Calculated Negative DP Rating 50, Year Rated 11, Egress Not Applicable Grille: No Grille, Horizontal Mull 1: FactoryMull, Standard Joining Mullion, Frame To Frame Width- 0", Mull Design Pressure- 20 2: Contemporary, 2579 Fixed Frame Direct Set Frame Size: 25 X 79 General Information: Interior Glazed, Factory Assembled, Standard, Clad, Pine, 5", 3 11/16" Exterior Color / Finish: Painted, Standard Enduraclad, Black Interior Color / Finish: Unfinished Interior Glass: Insulated Dual Low-E AdvancedComfort Low-E Insulating Glass Air Filled High Altitude Performance Information: U-Factor 0.27, SHGC 0.32, VLT 0.60, CPD PEL-N-18-02772-00001, Performance Class CW, PG 40, Calculated Positive DP Rating 40, Calculated Negative DP Rating 40, Year Rated 08|11 Grille: No Grille, Wrapping Information: Foldout Fins, Factory Applied, No Exterior Trim, 3 11/16", 5", Factory Applied, Pella Recommended Clearance, Perimeter Length = 242". PK # 2089 12of3PagePrinted on Detailed Proposal For more information regarding the finishing, maintenance, service and warranty of all Pella® products, visit the Pella® website at www.pella.com 5/27/2021 Customer:Quote Number:Project Name:Thunderbowl Architects 117 Neale Avenue 14142429 Location: Rough Opening: Attributes Viewed From Exterior Line # Qty 1 None Assigned 116 - 3/4" X 79 - 3/4" Special Pella® Reserve, Contemporary, 2-Wide Awning, Architect Reserve, Direct Set, Architect Reserve, Direct Set, 116 X 96, Black 20 1: Contemporary, Non-Standard SizeNon-Standard Size Vent Awning Frame Size: 58 X 17 General Information: Standard, Clad, Pine, 5", 3 11/16" Exterior Color / Finish: Painted, Standard Enduraclad, Black Interior Color / Finish: Unfinished Interior Sash / Panel: Square, Square, Standard, 1.46, 1.46, 1.46 Glass: Insulated Dual Low-E AdvancedComfort Low-E Insulating Glass Air Filled High Altitude Hardware Options: Large Awning Hardware, Saldo Fold-Away Crank, Matte Black, No Limited Opening Hardware, No Integrated Sensor, Sill Screen: Full Screen, Black, InView™ Performance Information: U-Factor 0.28, SHGC 0.25, VLT 0.47, CPD PEL-N-30-13238-00001, Performance Class LC, PG 40, Calculated Positive DP Rating 40, Calculated Negative DP Rating 40, Year Rated 11, Egress Not Applicable Grille: No Grille, Vertical Mull 1: FactoryMull, Standard Joining Mullion, Frame To Frame Width- 0", Mull Design Pressure- 20, Overall Thru Direction- Horizontal 2: Contemporary, Non-Standard SizeNon-Standard Size Vent Awning Frame Size: 58 X 17 General Information: Standard, Clad, Pine, 5", 3 11/16" Exterior Color / Finish: Painted, Standard Enduraclad, Black Interior Color / Finish: Unfinished Interior Sash / Panel: Square, Square, Standard, 1.46, 1.46, 1.46 Glass: Insulated Dual Low-E AdvancedComfort Low-E Insulating Glass Air Filled High Altitude Hardware Options: Large Awning Hardware, Saldo Fold-Away Crank, Matte Black, No Limited Opening Hardware, No Integrated Sensor, Sill Screen: Full Screen, Black, InView™ Performance Information: U-Factor 0.28, SHGC 0.25, VLT 0.47, CPD PEL-N-30-13238-00001, Performance Class LC, PG 40, Calculated Positive DP Rating 40, Calculated Negative DP Rating 40, Year Rated 11, Egress Not Applicable Grille: No Grille, Horizontal Mull 1: AlignedWith, 0" 3: Contemporary, 5879 Fixed Frame Direct Set Frame Size: 58 X 79 General Information: Interior Glazed, Factory Assembled, Standard, Clad, Pine, 5", 3 11/16" Exterior Color / Finish: Painted, Standard Enduraclad, Black Interior Color / Finish: Unfinished Interior Glass: Insulated Dual Low-E AdvancedComfort Low-E Insulating Glass Air Filled High Altitude Performance Information: U-Factor 0.27, SHGC 0.31, VLT 0.59, CPD PEL-N-18-02826-00001, Performance Class CW, PG 50, Calculated Positive DP Rating 50, Calculated Negative DP Rating 50, Year Rated 08|11 Grille: No Grille, Vertical Mull 2: FactoryMull, Standard Joining Mullion, Frame To Frame Width- 0", Mull Design Pressure- 20, Overall Thru Direction- Horizontal 4: Contemporary, 5879 Fixed Frame Direct Set Frame Size: 58 X 79 General Information: Interior Glazed, Factory Assembled, Standard, Clad, Pine, 5", 3 11/16" Exterior Color / Finish: Painted, Standard Enduraclad, Black Interior Color / Finish: Unfinished Interior Glass: Insulated Dual Low-E AdvancedComfort Low-E Insulating Glass Air Filled High Altitude Performance Information: U-Factor 0.27, SHGC 0.31, VLT 0.59, CPD PEL-N-18-02826-00001, Performance Class CW, PG 50, Calculated Positive DP Rating 50, Calculated Negative DP Rating 50, Year Rated 08|11 Grille: No Grille, Wrapping Information: Foldout Fins, Factory Applied, No Exterior Trim, 3 11/16", 5", Factory Applied, Pella Recommended Clearance, Perimeter Length = 424". PK # 2089 12of4PagePrinted on Detailed Proposal For more information regarding the finishing, maintenance, service and warranty of all Pella® products, visit the Pella® website at www.pella.com 5/27/2021 Custom Product Instructions:. . NOTE: Pricing is not complete. This product must be approved by Pella before final pricing will be calculated. Final Wall Depth:0' 3 11/16" Location: Rough Opening: Attributes Viewed From Exterior Line # Qty 1 None Assigned Standard Mullion Cover, Length: 96, Black Final Wall Depth:0' 3 11/16" 25 1: Accessory Frame Size: 1 X 1 General Information: Standard Mullion Cover Exterior Color / Finish: Painted, Standard Enduraclad, Black Wrapping Information: Perimeter Length = 0". PK # 2089 Location: Rough Opening: Attributes Viewed From Exterior Line # Qty 1 None Assigned Casements and Doors Mullion Covers, Length: 96, Unfinished Wood. Wood Type: Pine Final Wall Depth:0' 3 11/16" 30 1: Accessory Frame Size: 1 X 1 General Information: Pine, Casements and Doors Mullion Covers Interior Color / Finish: Unfinished Wood Interior Wrapping Information: Perimeter Length = 0". PK # 2089 Customer:Quote Number:Project Name:Thunderbowl Architects 117 Neale Avenue 14142429 12of5PagePrinted on Detailed Proposal For more information regarding the finishing, maintenance, service and warranty of all Pella® products, visit the Pella® website at www.pella.com 5/27/2021 Customer:Quote Number:Project Name:Thunderbowl Architects 117 Neale Avenue 14142429 Location:AttributesLine # Qty 1 None Assigned S & H Tailgate Z2 - Std Shipping & Handling Z235 Thank You For Your Interest In Pella® Products PELLA WARRANTY: 12of6PagePrinted on Detailed Proposal For more information regarding the finishing, maintenance, service and warranty of all Pella® products, visit the Pella® website at www.pella.com 5/27/2021 Customer:Quote Number:Project Name:Thunderbowl Architects 117 Neale Avenue 14142429 PELLA WARRANTY: Pella products are covered by Pella's limited warranties in effect at the time of sale. All applicable product warranties are incorporated into and become a part of this contract. Please see the warranties for complete details, taking special note of the two important notice sections regarding installation of Pella products and proper management of moisture within the wall system. Neither Pella Corporation nor the Seller will be bound by any other warranty unless specifically set out in this contract. However, Pella Corporation will not be liable for branch warranties which create obligations in addition to or obligations which are inconsistent with Pella written warranties. Clear opening (egress) information does not take into consideration the addition of a Rolscreen [or any other accessory] to the product. You should consult your local building code to ensure your Pella products meet local egress requirements. Per the manufacturer’s limited warranty, unfinished mahogany exterior windows and doors must be finished upon receipt prior to installing and refinished annually, thereafter. Variations in wood grain, color, texture or natural characteristics are not covered under the limited warranty. INSYNCTIVE PRODUCTS: In addition, Pella Insynctive Products are covered by the Pella Insynctive Products Software License Agreement and Pella Insynctive Products Privacy Policy in effect at the time of sale, which can be found at Insynctive.pella.com. By installing or using Your Insynctive Products you are acknowledging the Insynctive Software Agreement and Privacy Policy are part of the terms of sale. Notice of Collection of Personal Information: We may collect your personal information when you interact with us. Under the California Consumer Privacy Act (CCPA), California residents have specific rights to request this information, request to delete this information, and opt out of the sharing or sale of this information to third parties. To learn more about our collection practices and your rights under the CCPA please visit our link https://www.pella.com/california-rights-policy/at pella.com. ARBITRATION AND CLASS ACTION WAIVER ("ARBITRATION AGREEMENT") YOU and Pella and its subsidiaries and the Pella Branded Distributor AGREE TO ARBITRATE DISPUTES ARISING OUT OF OR RELATING TO YOUR PELLA PRODUCTS (INCLUDES PELLA GOODS AND PELLA SERVICES) AND WAIVE THE RIGHT TO HAVE A COURT OR JURY DECIDE DISPUTES. YOU WAIVE ALL RIGHTS TO PROCEED AS A MEMBER OR REPRESENTATIVE OF A CLASS ACTION, INCLUDING CLASS ARBITRATION, REGARDING DISPUTES ARISING OUT OF OR RELATING TO YOUR PELLA PRODUCTS.You may opt out of this Arbitration Agreement by providing notice to Pella no later than ninety (90) calendar days from the date You purchased or otherwise took ownership of Your Pella Goods. To opt out, You must send notice by e-mail to pellawebsupport@pella.com, with the subject line: “Arbitration Opt Out” or by calling (877) 473-5527. Opting out of the Arbitration Agreement will not affect the coverage provided by any applicable limited warranty pertaining to Your Pella Products. For complete information, including the full terms and conditions of this Arbitration Agreement, which are incorporated herein by reference, please visit www.pella.com/arbitration or e-mail to pellawebsupport@pella.com, with the subject line: “Arbitration Details” or call (877) 473-5527.D'ARBITRAGE ET RENONCIATION AU RECOURS COLLECTIF ("convention d'arbitrage") EN FRANÇAIS SEE PELLA.COM/ARBITRATION.DE ARBITRAJE Y RENUNCIA COLECTIVA ("acuerdo de arbitraje") EN ESPAÑOL VER PELLA.COM/ARBITRATION. Seller shall not be held liable for failure or delay in the performance of its obligations under this Agreement, if such performance is hindered or delayed by the occurrence of an act or event beyond the Seller’s reasonable control (force majeure event), including but not limited to earthquakes, unusually severe weather and other Acts of God, fire, strikes and labor unrest, epidemics, riots, war, civil unrest, and government interventions. Seller shall give timely notice of a force majeure event and take such reasonable action to mitigate the impacts of such an event. Product Performance Information: U-Factor, Solar Heat Gain Coefficient (SHGC), and Visible Light Transmittance (VLT) are certified by the National Fenestration Rating Council (NFRC). 12of7PagePrinted on Detailed Proposal For more information regarding the finishing, maintenance, service and warranty of all Pella® products, visit the Pella® website at www.pella.com 5/27/2021 Customer:Quote Number:Project Name:Thunderbowl Architects 117 Neale Avenue 14142429 Manufacturer stipulates that these ratings conform to applicable NFRC procedures for determining whole product performance. NFRC ratings are determined for a fixed set of environmental conditions and a specific product size. NFRC does not recommend any products and does not warrant the suitability of any product for any specific use. Design Pressure (DP), Performance Class, and Performance Grade (PG) are certified by a third party organization, in many cases the Window and Door Manufacturers Association (WDMA). The certification requires the performance of at least one product of the product line to be tested in accordance with the applicable performance standards and verified by an independent party. The certification indicates that the product(s) of the product line passed the applicable tests. The certification does not apply to mulled and/or product combinations unless noted. Actual product results will vary and change over the products life. For more performance information along with information on Florida Product Approval System (FPAS) Number and Texas Dept. of Insurance (TDI) number go to www.pella.com/performance. BRANCH WARRANTY: The full text of the manufacturer’s current warranty can be found at <<http://www.pella.com/products/warranty.asp>>. Supplier (PWD) offers the following Limited Warranty: LIMITED WARRANTY THE PELLA LIMITED WARRANTY EXCLUDES NON-PELLA PRODUCTS FROM WARRANTY COVERAGE STATED IN THIS DOCUMENT. SEE YOUR SALES REPRESENTATIVE FOR SPECIFIC PRODUCT WARRANTY INFORMATION. ALL NON-PELLA PRODUCTS CARRY A 1 YEAR LIMITED WARRANTY. NOTE* - NO WARRANTY IS PROVIDED FOR CONSEQUENTIAL DAMAGES. PWD MAKES NO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR ANY OTHER NATURE OR GUARANTEE, EXPRESS OR IMPLIED. UPON REQUEST, PWD WILL PROVIDE THE MANUFACTURER’S WARRANTIES CURRENTLY IN EFFECT RELATED TO THE MATERIAL SUPPLIED. THE MANUFACTURER’S WARRANTIES SHALL HAVE NO EFFECT UNTIL PWD HAS BEEN PAID IN FULL ALL SUMS DUE AND OWING FOR THE PRODUCT OR MATERIALS SUPPLIED PURSUANT TO THIS CONTRACT. In no event shall PWD or Pella Corporation be liable for consequential, indirect or incidental damages or for any amount in excess of the purchase price whether the claim is for breach of warranty or negligence. Material Properties and Specifications Wood is a natural product and that variations in grain and shading will occur and because no two pieces of wood are exactly alike, variations after finishing are to be expected and are not considered defects. All specifications which are not explicitly stated in product quotes or in the Pella Architectural Design Manual (ADM) are to be governed by industry standards including but not limited to FIGA <https://fgiaonline.org/> (Fenestration and Glazing Industry Alliance), and ASTM <https://www.astm.org/> (American Society for Testing Materials); this includes, but not limited to, quality and imperfections of: glass, fit and finishing, and assembly. Custom Materials Customer recognizes and acknowledges that the product or materials supplied by PWD are custom in nature and there is no ready market or value other than for the job for which the materials are manufactured and/or supplied. If Customer at any time fails to pay PWD for the materials supplied, PWD may, at it's option, suspend all deliveries or terminate the Contract with the Customer. Such suspension or termination DOES NOT excuse payment for those materials and products already manufactured at the full contract price or payment for any component parts already purchased and obtained by PWD. Title Title, ownership and the right to possession of the product or materials furnished or to be furnished by PWD shall remain in PWD until PWD is paid in full. PWD shall have a right to possession of the product or materials but is not obligated to repossess the materials in the event of non-payment. PWD's right to repossess materials is in addition to, and not a limitation upon or a waiver of PWD's other legal rights including the right to place mechanic's liens against the real property for which materials were supplied. All risk of loss or damage shall pass to the Customer upon delivery of the materials. In the event PWD elects to repossess any materials for which payment in full has not been made, Customer shall be responsible for any damage to or loss of 12of8PagePrinted on Detailed Proposal For more information regarding the finishing, maintenance, service and warranty of all Pella® products, visit the Pella® website at www.pella.com 5/27/2021 Customer:Quote Number:Project Name:Thunderbowl Architects 117 Neale Avenue 14142429 delivery of the materials. In the event PWD elects to repossess any materials for which payment in full has not been made, Customer shall be responsible for any damage to or loss of materials and their component parts. Risk of Loss Although title and ownership and the right to possession of the materials or product furnished or delivered to the Customer shall remain with PWD until the materials are fully paid for, the risk of loss for the product or materials once they are delivered to the Customer shall be the Customer's responsibility. Therefore, the customer must maintain sufficient insurance to cover any damage, vandalism or any other loss to the product or materials. Any insurance proceeds would be paid over to PWD for the full amount owed to PWD in the event of any loss. Dispute Resolution. Direct Discussion. If a dispute arises out of or relates to this Agreement, the parties shall endeavor to settle the dispute through direct discussion. Mediation. Disputes not resolved by direct discussion shall be submitted to mediation pursuant to the Construction Industry Mediation Rules of the American Arbitration Association. The parties shall select the mediator within fifteen (15) days of the request for mediation. Engaging in mediation is a condition precedent to any form of binding dispute resolution. This provision shall not act to delay Supplier filing a mechanic’s lien foreclosure action. The cost of any mediation proceeding shall be shared equally by the parties participating. TERMS & CONDITIONS: PLEASE READ CAREFULLY AND SIGN OR INITIAL WHERE REQUIRED. YOU ARE RESPONSIBLE FOR UNDERSTANDING THE ENCLOSED INFORMATION AS IT RELATES TO YOUR ORDER AND OUR COMPUTER PRINTOUT OF YOUR ORDER. Ø Tax exempt # __________________________ Ø Order #________________________________ PO#________________________________ Ø Total amount of order with taxes $__________________________ your tax rate is __________%. Ø A deposit of $_____________________ is required prior to factory order. q TERMS OF PAYMENT Interest of one and one half percent (1-1/2%) per month will be charged on all past due accounts. If Customer or Customer's agent directs PWD to retain the products or materials, although available for delivery, customer is responsible for payment in full within 20 days after the delivery date shown below. Customer agrees to pay all costs of collection including reasonable attorney's fees. This contract is deemed to have been entered into in the State of Colorado and Colorado law shall govern its interpretation and enforcement. Jurisdiction and venue for any legal action shall be in the County or District Court, City and County of Denver, Colorado. q DELIVERY Your requested DELIVERY DATE is (MUST BE DELIVERED WITHIN 5 DAYS OF THIS DATE) ____________________. In the event of failure to receive product within 10 days of your original delivery date a storage fee of $50 per week will be accessed. Please initial ______. When product has been in Pella's warehouse for more than 10 days, order must be paid in full. q DELIVERY DATES ARE NOT GUARANTEED and PWD shall not be liable for any direct, indirect or consequential damages or loss caused by delay in shipment. You will be notified as soon as possible if delivery during the above week becomes unattainable and a new delivery week will be established. Unless other arrangements are made with PWD, deliveries are tailgate and YOU MUST FURNISH LABOR TO UNLOAD. PWD assumes no responsibility or liability for injuries or damage to product after product leaves our truck. ·An authorized signature is required to accept delivery. ·Signed delivery tickets will be conclusive of delivery of the materials described, the quantities listed, and receipt in good and undamaged condition. ·No claims for concealed damage, errors or defects in product, materials, workmanship, or shortages will be allowed unless written notice is received by PWD within three (3) working days after delivery. If concealed damage, errors or defects in product, materials, workmanship, or shortages are discovered and timely notice is received by PWD, PWD will be liable only for the reasonable costs of supplying replacement or repairs. q ADDITIONS/REVISIONS/CANCELLATIONS/RETURNS All Pella Products, including windows, doors, parts and accessories are made to order and therefore non-refundable. Please review all the attributes of your order for accuracy prior to signing 12of9PagePrinted on Detailed Proposal For more information regarding the finishing, maintenance, service and warranty of all Pella® products, visit the Pella® website at www.pella.com 5/27/2021 Customer:Quote Number:Project Name:Thunderbowl Architects 117 Neale Avenue 14142429 All Pella Products, including windows, doors, parts and accessories are made to order and therefore non-refundable. Please review all the attributes of your order for accuracy prior to signing the purchase agreement. ·Any revisions after the contract date must be accompanied by a signed PWD Change Order Form, or by a separate contract. ·The terms of this Sales Contract shall apply to any additions, changes, and partial shipments requested for this job by the Customer or the Customer's agent. ORDER CHECKLIST - CUSTOMER MUST INITIAL EACH _______ I understand that I have three working days after the date of delivery to report concealed damage, errors or shortages. _______ I or my authorized representatives have verified the product attributes, handing, color, measurements and dimensions for the product ordered. _______ Deliveries require heavy lifting. I understand I must off load product from the truck tailgate into my home or garage. _______ I understand that a signed and dated copy of this Sales Contract must be in the possession of Pella Windows & Doors, Inc., along with my deposit check and credit application (if either is required), before my order can be submitted to the factory for production. _______ I understand that all orders are subject to acceptance by an officer of PWD. _______ I understand that the hinging and sliding designations for ALL products are as viewed from the OUTSIDE of the structure and from left to right. _______ I understand that wood is a natural product and that variations in grain and shading will occur and because no two pieces of wood are exactly alike, variations after finishing are normal and not considered defective. _______ I understand that all specifications which are not explicitly stated in product quotes or in the Pella Architectural Design Manual (ADM) are to be governed by industry standards including but not limited to FIGA (Fenestration and Glazing Industry Alliance), and ASTM (American Society for Testing Materials); this includes, but not limited to, quality and imperfections of: glass, fit and finishing, and assembly. _______ I understand that payment in full for installed product and services is due upon Substantial Completion, which is defined as completed to the point where product and/or services can be used for their intended purpose; there may remain outstanding punch list items, trivial imperfections, omissions, or warranty items. _______ I understand that building and safety code compliance is my responsibility as the purchaser. _______ Product warranty and other important information are contained in this document. _______ I understand that Pella Impervia and Wood patio doors come with a sealed oak threshold, that is not stained or painted. It will not match the finishing of the door. It is recommended that the threshold remains unfinished as this is a high traffic walking surface. THIS DOCUMENT, INCLUDING ADDENDUMS IF APPLICABLE, AND THE TERMS AND CONDITIONS CONTAINS THE ENTIRE AGREEMENT AND BUYER REPRESENTS THAT THEY HAVE READ, UNDERSTANDS AND AGREES TO BE BOUND BY THE SAME. SERVICE :Please sign the very last page and return to Pella as your acceptance of this quote. Parts take up to two weeks to arrive and must be paid in full at time of order however; labor can be paid up on completion of the job. Quotes are valid for 60 days and subject to rebid after such time. Please contact Customer Service with any questions you may have at 800-423- 7511. The parties acknowledge that the Pella Representative negotiating this Contract is not an officer who can contractually bind Pella, and has authority solely to agree to the terms and conditions contained in this Contract in its current form. No waiver, change, or modification of any terms or conditions of this Contract shall be binding on the parties unless made in writing and signed by an officer of each party. Photo/Video Release: 12of10PagePrinted on Detailed Proposal For more information regarding the finishing, maintenance, service and warranty of all Pella® products, visit the Pella® website at www.pella.com 5/27/2021 Customer:Quote Number:Project Name:Thunderbowl Architects 117 Neale Avenue 14142429 Photo/Video Release: I hereby authorize Pella Corporation, its affiliates and/or subsidiaries to use, reproduce, and/or publish photographs and/or video that may pertain to me and my project, including materials described below, without compensation. I understand that this material may be used in various communications (e.g. Website, e-newsletters, promotional materials, etc.). Consequently, the Corporation may publish materials, photographs, and/or refer to the project in a manner that the Corporation or project sponsor deems appropriate. Client Signature: ________________________________________________________ Date: ___________ Please let me know if you have any questions or concerns Thank you 12of11PagePrinted on Detailed Proposal For more information regarding the finishing, maintenance, service and warranty of all Pella® products, visit the Pella® website at www.pella.com 5/27/2021 Customer:Quote Number:Project Name:Thunderbowl Architects 117 Neale Avenue 14142429 Customer Signature Date Pella Sales Rep Signature Date Customer Name Pella Sales Rep Name(Please print)(Please print) Order Totals Taxable Subtotal Sales Tax @ Non-taxable Subtotal Total Deposit Received Amount Due $5,994.52 $0.00 $6,384.16 $0.00 6.5%$389.64 $6,384.16 12of12PagePrinted on Detailed Proposal For more information regarding the finishing, maintenance, service and warranty of all Pella® products, visit the Pella® website at www.pella.com 5/27/2021 Jobsite Location: Sales Branch Location: These drawings are based on our interpretation of the information provided to us. They are submitted for final approval of the individual** responsible for the project and are not intended to create any warranty or other liability. The user** is responsible for compliance with applicable building codes or other regulations and determining the suitability of the suggestions for the particular application, including the final design of reinforcement, flashing, and sealant systems for all window and door installations. ** building owner, architect, contractor, installer and/or consumer Description: Project Name:Quote Name: Room Location: ASPEN, CO 117 Neale Avenue None Assigned Pella® Reserve, Contemporary, Awning, Architect Reserve, Direct Set Fixed Frame Rectangle, 25 X 96, 10 04200 PELLA WINDOWS & DOORS, LLC 5/27/21 Rough Opening:25.75" X 96.75" Scaling:1/2" = 1' Viewed from the Exterior 14142429Quote Number: Line Number:Quote Qty:1 Performance Information: U-Factor 0.28, SHGC 0.25, VLT 0.47, CPD PEL-N-30-13238-00001, Performance Class CW, PG 50, Calculated Positive DP Rating 50, Calculated Negative DP Rating 50, Year Rated 11, Egress Not Applicable Performance Information: U-Factor 0.27, SHGC 0.32, VLT 0.60, CPD PEL-N-18-02772-00001, Performance Class CW, PG 40, Calculated Positive DP Rating 40, Calculated Negative DP Rating 40, Year Rated 08|11 Customer Approval Form: Signature:Date: Of1Page 5Printed On:5/27/2021 Customer Approval Form: Signature:Date: Jobsite Location: Sales Branch Location: These drawings are based on our interpretation of the information provided to us. They are submitted for final approval of the individual** responsible for the project and are not intended to create any warranty or other liability. The user** is responsible for compliance with applicable building codes or other regulations and determining the suitability of the suggestions for the particular application, including the final design of reinforcement, flashing, and sealant systems for all window and door installations. ** building owner, architect, contractor, installer and/or consumer Description: Project Name:Quote Name: Room Location: ASPEN, CO 117 Neale Avenue None Assigned Pella® Reserve, Contemporary, Awning, Architect Reserve, Direct Set Fixed Frame Rectangle, 25 X 96, 15 04200 PELLA WINDOWS & DOORS, LLC 5/27/21 Rough Opening:25.75" X 96.75" Scaling:1/2" = 1' Viewed from the Exterior 14142429Quote Number: Line Number:Quote Qty:1 Performance Information: U-Factor 0.28, SHGC 0.25, VLT 0.47, CPD PEL-N-30-13238-00001, Performance Class CW, PG 50, Calculated Positive DP Rating 50, Calculated Negative DP Rating 50, Year Rated 11, Egress Not Applicable Performance Information: U-Factor 0.27, SHGC 0.32, VLT 0.60, CPD PEL-N-18-02772-00001, Performance Class CW, PG 40, Calculated Positive DP Rating 40, Calculated Negative DP Rating 40, Year Rated 08|11 Of2Page 5Printed On:5/27/2021 Customer Approval Form: Signature:Date: Jobsite Location: Sales Branch Location: These drawings are based on our interpretation of the information provided to us. They are submitted for final approval of the individual** responsible for the project and are not intended to create any warranty or other liability. The user** is responsible for compliance with applicable building codes or other regulations and determining the suitability of the suggestions for the particular application, including the final design of reinforcement, flashing, and sealant systems for all window and door installations. ** building owner, architect, contractor, installer and/or consumer Description: Project Name:Quote Name: Room Location: ASPEN, CO 117 Neale Avenue None Assigned Special Pella® Reserve, Contemporary, 2-Wide Awning, Architect Reserve, Direct Set, Architect Reserve, 20 04200 PELLA WINDOWS & DOORS, LLC 5/27/21 Rough Opening:116.75" X 79.75" Scaling:1/2" = 1' Viewed from the Exterior 14142429Quote Number: Line Number:Quote Qty:1 Performance Information: U-Factor 0.28, SHGC 0.25, VLT 0.47, CPD PEL-N-30-13238-00001, Performance Class LC, PG 40, Calculated Positive DP Rating 40, Calculated Negative DP Rating 40, Year Rated 11, Egress Not Applicable Performance Information: U-Factor 0.28, SHGC 0.25, VLT 0.47, CPD PEL-N-30-13238-00001, Performance Class LC, PG 40, Calculated Positive DP Rating 40, Calculated Negative DP Rating 40, Year Rated 11, Egress Not Applicable Performance Information: U-Factor 0.27, SHGC 0.31, VLT 0.59, CPD PEL-N-18-02826-00001, Performance Class CW, PG 50, Calculated Positive DP Rating 50, Calculated Negative DP Rating 50, Year Rated 08|11 Performance Information: U-Factor 0.27, SHGC 0.31, VLT 0.59, CPD PEL-N-18-02826-00001, Performance Class CW, PG 50, Calculated Positive DP Rating 50, Calculated Negative DP Rating 50, Year Rated 08|11 Of3Page 5Printed On:5/27/2021 Customer Approval Form: Signature:Date: Jobsite Location: Sales Branch Location: These drawings are based on our interpretation of the information provided to us. They are submitted for final approval of the individual** responsible for the project and are not intended to create any warranty or other liability. The user** is responsible for compliance with applicable building codes or other regulations and determining the suitability of the suggestions for the particular application, including the final design of reinforcement, flashing, and sealant systems for all window and door installations. ** building owner, architect, contractor, installer and/or consumer Description: Project Name:Quote Name: Room Location: ASPEN, CO 117 Neale Avenue None Assigned Standard Mullion Cover, Length: 96, Black 25 04200 PELLA WINDOWS & DOORS, LLC 5/27/21 Rough Opening: Scaling:1/2" = 1' Viewed from the Exterior 14142429Quote Number: Line Number:Quote Qty:1 Of4Page 5Printed On:5/27/2021 Customer Approval Form: Signature:Date: Jobsite Location: Sales Branch Location: These drawings are based on our interpretation of the information provided to us. They are submitted for final approval of the individual** responsible for the project and are not intended to create any warranty or other liability. The user** is responsible for compliance with applicable building codes or other regulations and determining the suitability of the suggestions for the particular application, including the final design of reinforcement, flashing, and sealant systems for all window and door installations. ** building owner, architect, contractor, installer and/or consumer Description: Project Name:Quote Name: Room Location: ASPEN, CO 117 Neale Avenue None Assigned Casements and Doors Mullion Covers, Length: 96, Unfinished Wood. Wood Type: Pine 30 04200 PELLA WINDOWS & DOORS, LLC 5/27/21 Rough Opening: Scaling:1/2" = 1' Viewed from the Exterior 14142429Quote Number: Line Number:Quote Qty:1 Of5Page 5Printed On:5/27/2021