HomeMy WebLinkAboutFile Documents.1263 Bunny Ct.0015-2023-BCHO (8) •
4111°1°
CITY OF ASPEN
SPECIAL INSPECTION AND TESTING AGREEMENT
This form is required for projects needing special inspection and/or testing per Chapter 17 of the International;
Building Code(IBC).
1263 Bunny Ct. Aspen CO 81611 0047-2022-BRES
Project Address: Permit Number:
BEFORE A PERMIT CAN BE ISSUED:The owner,or the design professional in responsible charge,acting as
the owner's agent,shall complete two copies of this agreement and the attached Special-inspection and Testing
Schedule,including the required acknowledgments. A pre-construction conference with the parties involved nary he
required to review the special-inspection requirements and procedures.
APPROVAL OF SPECIAL INSPECTORS: Special inspectors may have no financial interest in the projec for
which they provide special inspections.Special inspectors shall be approved by the building department prior o
performing any duties.Special inspectors shall submit their qualifications and are subject to personal intervie% s for
pre-qualification. Special inspectors shall display approved identification,as stipulated by the building offieia ,
when perlbmming the function ol'special inspector.
Special inspection and testing shall meet the minimum requirements of the International Building Code Secli n
1704.'i'he following conditions arc also applicable:
A. Special Inspector Responsibilities:
I. Signify presence at job site. Special inspectors should notify contractor personnel of their
presence and responsibilities at the job site. II'required by the building official,they shall si in
on the appropriate form posted with the building permit.
2. Observe assigned work.The special inspector shall observe assigned work for conlommande with
the building department approved(stamped)design drawings,specifications,and applicabl
workmanship provisions of the International Building Code. Architect\engineer-reviewed s op
drawings may he used only as an aid to inspection.
For continuous special-inspection,the special inspector shall he on site at all times observin the
work requiring special inspection. Periodic inspections,if-any,must have prior approval ba ed on
a separate written plan reviewed and approved by the building department and the engineer r
architect ol'record.
3. Report nonconforming items.The special inspector shall bring nonconforming items to the
immediate attention of the contractor and note all such items in the daily report. If any item is not
resolved in a timely manner or is about to be incorporated in the work,the special inspector shall
immediately notify the building department by telephone or in person,notify the engineer or
architect,and post a discrepancy notice.
4. Provide timely reports.The special inspector shall complete written inspection reports !breach
inspection visit and provide the reports on a timely basis determined by the building officiaL The
special inspector or inspection agency shall furnish these reports directly to the building oil-vial,
engineer or architect of record,and others as designated. (IBC Sec. 1704.1.2]These reports should
be organized on a daily format and may be submitted weekly at the option of the building o Heist.
These reports should include:
a. Description of daily inspections and tests made with applicable locations,
h. Listing of nonconforming items,
c. Report on how nonconforming items were resolved or unresolved as applicable,
d. Itemized changes authorized by the architect,engineer,and building official if
not included in nonconforming items
5. Provide Final Inspection Report.The special inspector shall submit a written final report
documenting required special inspections and correction of any discrepancies noted in the
inspections prior to the final building inspection.
RECEWED
R0 0 03/16/2023
As ASPEN
9ALONG DEPARTMENT
I
B. Owner Responsibilities:
1. The project owner,an agent of the owner,or the design professional in responsible charge acking
as the owner's agent,is responsible for employing special-inspection services.The special
inspector/agency shall not be in the employ of the contractor,subcontractor or material suppler.
[IBC Sec 1704.1}In case of an owner/contractor,the special inspectorlagencv-shall be employed
as specified by the building official.
C. Design Professional in Responsible Charge Responsibilities:
Design Professional in Responsible Charge definition:An individual who is registered or licensed to practice their
respective design profession as defined by the statutory requirements of the professional registration laws of the state or
jurisdiction in which the project is to he constructed:who is engaged by the owner to review and coordinate certain
aspects of the project.as determined by the building official,for compatibility with the design of the building or
structure.
1. Prepare statement of special inspections.The registered design professional in responsible
charge shall prepare a statement of special inspections in accordance with 1BC Section 1705 Tor
submittal by the applicant.The statement of special inspections shall identify the following:
a. The materials,systems,components and work required to have special inspection or
testing by the building official or by the registered design professional responsible fair
each portion of the work.
b. The type and extent of each special inspection.
c. The type and extent of each test.
d. For each type of special inspection,identification as to whether it will be continuou
special inspection or periodic special inspection.
D. Contractor Responsibilities:
1. Notify the special inspector. The contractor is responsible for notifying the special inspector or
agency regarding individual inspections for items listed on the attached schedule and as noted on
the building department approved plans.Adequate notice shall be provided so the special inspector
has time to become familiar with the project.
2. Provide access to approved plans.The contractor is responsible for providing the special
inspector access to approved plans,
3. Retain special inspection records.Upon request,the contractor is also responsible for retaining,
at the job site,all special inspection records completed by the special inspector.
E. Inspection of Fabricators: •
1. Fabrication of structural assemblies and members.Where fabrication of structural load-blearing
members and assemblies is being performed on the premises of a fabricator's shop,il3C Section
1704.2 shall require special inspection of the fabricated items.
2. Fabrication and implementation procedures.The special inspector shall verify that the
fabricator maintains detailed fabrication and quality control procedures that provide a basis ffr •
inspection control of the workmanship and the fabricators ability to conform to approved
construction documents and reference standards.The special inspector shall review the procedures
for completeness and adequacy relative to code requirements for fabricator's scope of work.
F. Approved Fabricator ResponsibIlities:
1. Fabrication exempt inspections. Special inspections are not required where work is done oh the
premise of a fabricator registered and approved to perform such work without special inspection.
If work is done on site that requires special inspection,special inspection will be required.
2. Approval of fabricator.Approval shall be based upon review of the fabricator's written
procedural and quality control manuals and periodic auditing of fabrication practices by an
approved special inspection agency.
3. CompletIon of fabrication. Upon completion of fabrication,the approved fabricator shall s bmit
certificate of compliance to the building official stating that the work teas performed in accordance
with the approved construction documents.
•
•
•
D RECEIVED
13/17/2023 03/16/2023
ASPEN
BUIWINGOEPANIMENT
G. Building Department Responsibilities:
1. Approve special-inspection program.The building department shall approve all special
inspectors and special-inspection requirements.
2. Enforce special inspection. Work requiring special inspection and the building inspector sh.II
monitor the performance of special inspectors.l lis/I-Ier approval,in addition to that of the se cial
inspector,must he obtained prior to placement of concrete,covenng of structural steel,or oti er
similar materials.
3. Review inspection reports.The building official should review special-inspection progress nd
l iniil reports.
4. Perform final inspection.The building official should perform the final inspection and app oval
for a project(iBC Sec. 109.3.11 alter the final special-inspection report has been reviewed a d
approved.
1263 Bunny Ct Aspen CO 81611 0047 2022 BRES
Project Address: Permit Number:
ACKNOW LF:DGMEIs1S
i have read and agree to comply with the conditions of this agreement.
OW Metal Works,Inc. C ¢X!!. Christopher Pena 2/3/23 cpenaOdwmetalworkslnc.com
Special Inspection Signature Printed Name Date Email
Agency***
Robert M. Ferguson Robert M. Ferguson 2/13/23 bferguson@jaywalker`odge.com
Owner* Signs Printed Name Date Email
Evolve Structural Design / Steven Edmiston 02/09/23 stave@evolvestruct.com
Design Professional in Signature Printed Name Date Email
Responsible Charge**
CS,I",Set L.,T t2 NrN,E-tom Z//°/z3 G I4sUitr. (O2y
Contractor Signs re Printed Name Date Email
Approved Signature} Printed Name Date Email
Fabricator***
7Y'i/tr-l-.0 4C/G"Cbl, il( / C— 7)5)1 3 weeitmweat5 inte,Ar a I twin
Inspected Signature Printed Name Date Email
Fabricator***
City of Aspen Building v Jim Pomeroy 3/17/23 jim.pomeroy@aspen.gov
Department: r Signature Printed Name Date Email
•see u tout of who may sign as the owner on page 2.
"The DrsIgn Ptufeasioual in Rcspon3il'lc Charge is not required t..sign if they perform the Juries as decenhed in item C shrive.
•••Fit her the Approved Fabricator or inspected Fabricator must sign.If ell work is performed In the shop of an Approved Fabricator,the Spacial
Inspection Agency signature is not required(no field work). •
13o South Galena Sunset Aspen,CO 91611.1975 I Pt 970.9205000 I F$970.92U51Y7 I tityofaepnn.com
-.r •ECEIVED
03/16/2023
1011600.1MACE
ASPEN
BUIIAINGOEPANIMENT