HomeMy WebLinkAboutFile Documents.155 Miners Trail Rd.0097-2021-BRES (13)Generated by REScheck-Web Software
Compliance Certificate
Project 155 Miners Trail
Energy Code:2015 IECC
Location:Aspen, Colorado
Construction Type:Single-family
Project Type:Alteration
Climate Zone:7 (9922 HDD)
Permit Date:
Construction Site:
155 Miners Trail Rd
Aspen, CO 81611
Owner/Agent:
RAF PT Aspen LLC
10000 Memorial Dr
#320
Houston, TX 77023
Designer/Contractor:
Alison Agley
Ali & Shea LLC
PO Box 6564
Snowmass Village, CO 81615
970.274.9796
aliagley@gmail.com
Permit Number:
Compliance: Passes using prescriptive requirements for alteration projects
Slab-on-grade tradeoffs are no longer considered in the UA or performance compliance path in REScheck. Each slab-on-grade
assembly in the specified climate zone must meet the minimum energy code insulation R-value and depth requirements.
Envelope Assemblies
Assembly
Gross Area
or
Perimeter
Cavity
R-Value
Cont.
R-Value
Prop.
U-Factor
Req.
U-Factor
Prop.
UA
Req.
UA
Ceiling Master Deck: Flat Ceiling or Scissor Truss 62 49.0 0.0 0.026 0.026 2 2
Ceilings Exposed: Flat Ceiling or Scissor Truss
Exemption: Framing cavity filled with insulation ---------------------
Flat Ceilings: Flat Ceiling or Scissor Truss
Exemption: Framing cavity not exposed.---------------------
Vaulted Ceilings: Flat Ceiling or Scissor Truss
Exemption: Neither sheathing nor insulation is
exposed.
---------------------
Skylight: Wood Frame 6 0.470 0.550 3 4
Sloped Cathedral Ceiling: Cathedral Ceiling
Exemption: Neither sheathing nor insulation is
exposed.
---------------------
Skylight: Wood Frame 6 0.470 0.550 3 4
East Wall: Wood Frame, 16" o.c.
Exemption: Framing cavity filled with insulation ---------------------
E- *** Door Garages: Solid Door (under 50% glazing)144 0.320 0.320 46 46
E- *** Door Garages Copy: Solid Door (under 50%
glazing)144 0.320 0.320 46 46
E- Door 110: Glass Door (over 50% glazing)24 0.320 0.320 8 8
Project Title: 155 Miners Trail
Data filename:Page 1 of 11
10/12/21Report date:11/03/2021
Assembly
Gross Area
or
Perimeter
Cavity
R-Value
Cont.
R-Value
Prop.
U-Factor
Req.
U-Factor
Prop.
UA
Req.
UA
E- *** Door 108 FRONT: Glass Door (over 50%
glazing)57 0.320 0.320 18 18
E- Window 107 sides: Wood Frame 8 0.260 0.320 2 2
E- Window 107 Picture: Wood Frame 20 0.240 0.320 5 6
E- Window 109: Wood Frame 15 0.260 0.320 4 5
E- Window 204 sides: Wood Frame 14 0.260 0.320 4 4
E- Window 205 Sides: Wood Frame 10 0.260 0.320 3 3
E- Window 205: Wood Frame 8 0.240 0.320 2 3
E- Window 206: Wood Frame 12 0.260 0.320 3 4
E- Window 204: Wood Frame 16 0.240 0.320 4 5
E- Window 011: Wood Frame 20 0.260 0.320 5 6
West Wall: Wood Frame, 16" o.c.
Exemption: Framing cavity filled with insulation ---------------------
W- Door 003: Glass Door (over 50% glazing)43 0.270 0.320 12 14
W- Door 101: Glass Door (over 50% glazing)64 0.300 0.320 19 20
W- DoorS 102 A+B: Glass Door (over 50% glazing)99 0.320 0.320 32 32
W- Window 001: Wood Frame 10 0.260 0.320 3 3
W- Window 002 Sides - w: Wood Frame 16 0.260 0.320 4 5
W- Window 002: Wood Frame 16 0.240 0.320 4 5
W- Window 100: Wood Frame 18 0.240 0.320 4 6
W- Window100 SIDES: Wood Frame 24 0.260 0.320 6 8
W- Window 102 C+D: Wood Frame 19 0.240 0.320 5 6
South Wall: Wood Frame, 16" o.c.
Exemption: Framing cavity filled with insulation ---------------------
S- Door 201: Glass Door (over 50% glazing)19 0.320 0.320 6 6
S- Window 102 A+B: Wood Frame 60 0.260 0.320 16 19
S- Window 105: Wood Frame 12 0.260 0.320 3 4
S- Window 107: Wood Frame 12 0.260 0.320 3 4
S- Window 005: Wood Frame 45 0.260 0.320 12 14
S- Window 009: Wood Frame 38 0.260 0.320 10 12
S- Window 204B: Wood Frame 15 0.260 0.320 4 5
S- Window 201A: Wood Frame 33 0.240 0.320 8 11
S- Window 201 B: Wood Frame 17 0.240 0.320 4 5
S- Window 204C: Wood Frame 10 0.260 0.320 3 3
North Wall: Wood Frame, 16" o.c.
Exemption: Framing cavity filled with insulation ---------------------
N- Window 100b: Vinyl Frame 16 0.260 0.320 4 5
Basement: Solid Concrete or Masonry
Wall height: 0.0'
Depth below grade: 0.0'
Insulation depth: 0.0'
Exemption: Framing cavity filled with insulation
---------------------
Project Title: 155 Miners Trail
Data filename:Page 2 of 11
10/12/21Report date:11/03/2021
Assembly
Gross Area
or
Perimeter
Cavity
R-Value
Cont.
R-Value
Prop.
U-Factor
Req.
U-Factor
Prop.
UA
Req.
UA
Basement 1: Wood Frame
Wall height: 0.0'
Depth below grade: 0.0'
Insulation depth: 0.0'
Exemption: Framing cavity not exposed.
---------------------
Name - Title Signature Date
Compliance Statement: The proposed building design described here is consistent with the building plans, specifications, and other
calculations submitted with the permit application. The proposed building has been designed to meet the 2015 IECC requirements in
REScheck Version : REScheck-Web and to comply with the mandatory requirements listed in the REScheck Inspection Checklist.
Project Title: 155 Miners Trail
Data filename:Page 3 of 11
10/12/21Report date:11/03/2021
Inspection Checklist
Requirements: 36.0% were addressed directly in the REScheck software
REScheck Software Version : REScheck-Web
Text in the "Comments/Assumptions" column is provided by the user in the REScheck Requirements screen. For each
requirement, the user certifies that a code requirement will be met and how that is documented, or that an exception
is being claimed. Where compliance is itemized in a separate table, a reference to that table is provided.
Energy Code: 2015 IECC
Section
#
& Req.ID
Pre-Inspection/Plan Review Plans Verified
Value
Field Verified
Value Complies?Comments/Assumptions
103.1,
103.2
[PR1]1
Construction drawings and
documentation demonstrate
energy code compliance for the
building envelope. Thermal
envelope represented on
construction documents.
Complies
Does Not
Not Observable
Not Applicable
Requirement will be met.
Location on plans/spec:
Noted, Existing conditions to
remain, finish alteration only
103.1,
103.2,
403.7
[PR3]1
Construction drawings and
documentation demonstrate
energy code compliance for
lighting and mechanical systems.
Systems serving multiple
dwelling units must demonstrate
compliance with the IECC
Commercial Provisions.
Complies
Does Not
Not Observable
Not Applicable
302.1,
403.7
[PR2]2
Heating and cooling equipment is
sized per ACCA Manual S based
on loads calculated per ACCA
Manual J or other methods
approved by the code official.
Heating:
Btu/hr_____
Cooling:
Btu/hr_____
Heating:
Btu/hr_____
Cooling:
Btu/hr_____
Complies
Does Not
Not Observable
Not Applicable
Additional Comments/Assumptions:
1 High Impact (Tier 1)2 Medium Impact (Tier 2)3 Low Impact (Tier 3)
Project Title: 155 Miners Trail
Data filename:Page 4 of 11
10/12/21Report date:11/03/2021
Section
#
& Req.ID
Foundation Inspection Plans Verified
Value
Field Verified
Value Complies?Comments/Assumptions
402.1.1
[FO4]1
Conditioned basement wall
insulation R-value. Where interior
insulation is used, verification
may need to occur during
Insulation Inspection. Not
required in warm-humid locations
in Climate Zone 3.
R-_____
R-_____
R-_____
R-_____
Complies
Does Not
Not Observable
Not Applicable
See the Envelope Assemblies
table for values.
303.2
[FO5]1
Conditioned basement wall
insulation installed per
manufacturer’s instructions.
Complies
Does Not
Not Observable
Not Applicable
Requirement will be met.
Location on plans/spec:
Noted, Existing conditions to
remain, Interior remodeling
only
402.2.9
[FO6]1
Conditioned basement wall
insulation depth of burial or
distance from top of wall.
_____ ft _____ ft Complies
Does Not
Not Observable
Not Applicable
See the Envelope Assemblies
table for values.
303.2.1
[FO11]2
A protective covering is installed
to protect exposed exterior
insulation and extends a
minimum of 6 in. below grade.
Complies
Does Not
Not Observable
Not Applicable
Requirement will be met.
Location on plans/spec:
Existing conditions will be
reviewed and repaired if
damaged or missing
403.9
[FO12]2
Snow- and ice-melting system
controls installed.
Complies
Does Not
Not Observable
Not Applicable
Additional Comments/Assumptions:
1 High Impact (Tier 1)2 Medium Impact (Tier 2)3 Low Impact (Tier 3)
Project Title: 155 Miners Trail
Data filename:Page 5 of 11
10/12/21Report date:11/03/2021
Section
#
& Req.ID
Framing / Rough-In Inspection Plans Verified
Value
Field Verified
Value Complies?Comments/Assumptions
402.1.1,
402.3.4
[FR1]1
Door U-factor.U-_____U-_____Complies
Does Not
Not Observable
Not Applicable
See the Envelope Assemblies
table for values.
402.1.1,
402.3.1,
402.3.3,
402.5
[FR2]1
Glazing U-factor (area-weighted
average).
U-_____U-_____Complies
Does Not
Not Observable
Not Applicable
See the Envelope Assemblies
table for values.
303.1.3
[FR4]1
U-factors of fenestration products
are determined in accordance
with the NFRC test procedure or
taken from the default table.
Complies
Does Not
Not Observable
Not Applicable
Requirement will be met.
Location on plans/spec:
Window Manuf. Specs
included
402.1.1,
402.3.3,
402.3.6,
402.5
[FR5]1
Skylight U-factor.U-_____U-_____Complies
Does Not
Not Observable
Not Applicable
See the Envelope Assemblies
table for values.
402.4.1.1
[FR23]1
Air barrier and thermal barrier
installed per manufacturer’s
instructions.
Complies
Does Not
Not Observable
Not Applicable
Requirement will be met.
Location on plans/spec:
Existing conditions will be
reviewed where possible and
repaired if damaged or
missing
402.4.3
[FR20]1
Fenestration that is not site built
is listed and labeled as meeting
AAMA /WDMA/CSA 101/I.S.2/A440
or has infiltration rates per NFRC
400 that do not exceed code
limits.
Complies
Does Not
Not Observable
Not Applicable
Requirement will be met.
402.4.5
[FR16]2
IC-rated recessed lighting fixtures
sealed at housing/interior finish
and labeled to indicate ≤2.0 cfm
leakage at 75 Pa.
Complies
Does Not
Not Observable
Not Applicable
Requirement will be met.
403.3.1
[FR12]1
Supply and return ducts in attics
insulated >= R-8 where duct is
>= 3 inches in diameter and >=
R-6 where < 3 inches. Supply and
return ducts in other portions of
the building insulated >= R-6 for
diameter >= 3 inches and R-4.2
for < 3 inches in diameter.
Complies
Does Not
Not Observable
Not Applicable
403.3.5
[FR15]3
Building cavities are not used as
ducts or plenums.
Complies
Does Not
Not Observable
Not Applicable
403.4
[FR17]2
HVAC piping conveying fluids
above 105 ºF or chilled fluids
below 55 ºF are insulated to ≥R-
3.
R-_____R-_____Complies
Does Not
Not Observable
Not Applicable
403.4.1
[FR24]1
Protection of insulation on HVAC
piping.
Complies
Does Not
Not Observable
Not Applicable
1 High Impact (Tier 1)2 Medium Impact (Tier 2)3 Low Impact (Tier 3)
Project Title: 155 Miners Trail
Data filename:Page 6 of 11
10/12/21Report date:11/03/2021
Section
#
& Req.ID
Framing / Rough-In Inspection Plans Verified
Value
Field Verified
Value Complies?Comments/Assumptions
403.5.3
[FR18]2
Hot water pipes are insulated to
≥R-3.
R-_____R-_____Complies
Does Not
Not Observable
Not Applicable
403.6
[FR19]2
Automatic or gravity dampers are
installed on all outdoor air
intakes and exhausts.
Complies
Does Not
Not Observable
Not Applicable
Requirement will be met.
Additional Comments/Assumptions:
1 High Impact (Tier 1)2 Medium Impact (Tier 2)3 Low Impact (Tier 3)
Project Title: 155 Miners Trail
Data filename:Page 7 of 11
10/12/21Report date:11/03/2021
Section
#
& Req.ID
Insulation Inspection Plans Verified
Value
Field Verified
Value Complies?Comments/Assumptions
303.1
[IN13]2
All installed insulation is labeled
or the installed R-values
provided.
Complies
Does Not
Not Observable
Not Applicable
Requirement will be met.
402.1.1,
402.2.5,
402.2.6
[IN3]1
Wall insulation R-value. If this is a
mass wall with at least ½ of the
wall insulation on the wall
exterior, the exterior insulation
requirement applies (FR10).
R-_____
Wood
Mass
Steel
R-_____
Wood
Mass
Steel
Complies
Does Not
Not Observable
Not Applicable
See the Envelope Assemblies
table for values.
303.2
[IN4]1
Wall insulation is installed per
manufacturer’s instructions.
Complies
Does Not
Not Observable
Not Applicable
Requirement will be met.
Location on plans/spec:
Noted, Existing conditions to
remain, finish alteration only
Additional Comments/Assumptions:
1 High Impact (Tier 1)2 Medium Impact (Tier 2)3 Low Impact (Tier 3)
Project Title: 155 Miners Trail
Data filename:Page 8 of 11
10/12/21Report date:11/03/2021
Section
#
& Req.ID
Final Inspection Provisions Plans Verified
Value
Field Verified
Value Complies?Comments/Assumptions
402.1.1,
402.2.1,
402.2.2,
402.2.6
[FI1]1
Ceiling insulation R-value.R-_____
Wood
Steel
R-_____
Wood
Steel
Complies
Does Not
Not Observable
Not Applicable
See the Envelope Assemblies
table for values.
303.1.1.1,
303.2
[FI2]1
Ceiling insulation installed per
manufacturer’s instructions.
Blown insulation marked every
300 ft².
Complies
Does Not
Not Observable
Not Applicable
Requirement will be met.
Location on plans/spec:
Details on sheet A8.1 for new
ceiling insulation at master
deck
402.2.3
[FI22]2
Vented attics with air permeable
insulation include baffle adjacent
to soffit and eave vents that
extends over insulation.
Complies
Does Not
Not Observable
Not Applicable
Requirement will be met.
Location on plans/spec:
Existing conditions will be
reviewed where possible and
repaired if damaged or
missing
402.2.4
[FI3]1
Attic access hatch and door
insulation ≥R-value of the
adjacent assembly.
R-_____R-_____Complies
Does Not
Not Observable
Not Applicable
Requirement will be met.
Location on plans/spec:
Existing conditions will be
reviewed where possible and
repaired if damaged or
missing
402.4.1.2
[FI17]1
Blower door test @ 50 Pa. <=5
ach in Climate Zones 1-2, and
<=3 ach in Climate Zones 3-8.
ACH 50 =_____ACH 50 =_____Complies
Does Not
Not Observable
Not Applicable
Requirement will be met.
403.3.4
[FI4]1
Duct tightness test result of <=4
cfm/100 ft2 across the system or
<=3 cfm/100 ft2 without air
handler @ 25 Pa. For rough-in
tests, verification may need to
occur during Framing Inspection.
_____ cfm/100
ft2
_____ cfm/100
ft2
Complies
Does Not
Not Observable
Not Applicable
403.3.3
[FI27]1
Ducts are pressure tested to
determine air leakage with
either: Rough-in test: Total
leakage measured with a
pressure differential of 0.1 inch
w.g. across the system including
the manufacturer’s air handler
enclosure if installed at time of
test. Postconstruction test: Total
leakage measured with a
pressure differential of 0.1 inch
w.g. across the entire system
including the manufacturer’s air
handler enclosure.
_____ cfm/100
ft2
_____ cfm/100
ft2
Complies
Does Not
Not Observable
Not Applicable
403.3.2.1
[FI24]1
Air handler leakage designated
by manufacturer at <=2% of
design air flow.
Complies
Does Not
Not Observable
Not Applicable
403.1.1
[FI9]2
Programmable thermostats
installed for control of primary
heating and cooling systems and
initially set by manufacturer to
code specifications.
Complies
Does Not
Not Observable
Not Applicable
1 High Impact (Tier 1)2 Medium Impact (Tier 2)3 Low Impact (Tier 3)
Project Title: 155 Miners Trail
Data filename:Page 9 of 11
10/12/21Report date:11/03/2021
Section
#
& Req.ID
Final Inspection Provisions Plans Verified
Value
Field Verified
Value Complies?Comments/Assumptions
403.1.2
[FI10]2
Heat pump thermostat installed
on heat pumps.
Complies
Does Not
Not Observable
Not Applicable
403.5.1
[FI11]2
Circulating service hot water
systems have automatic or
accessible manual controls.
Complies
Does Not
Not Observable
Not Applicable
403.6.1
[FI25]2
All mechanical ventilation system
fans not part of tested and listed
HVAC equipment meet efficacy
and air flow limits.
Complies
Does Not
Not Observable
Not Applicable
403.2
[FI26]2
Hot water boilers supplying heat
through one- or two-pipe heating
systems have outdoor setback
control to lower boiler water
temperature based on outdoor
temperature.
Complies
Does Not
Not Observable
Not Applicable
403.5.1.1
[FI28]2
Heated water circulation systems
have a circulation pump. The
system return pipe is a dedicated
return pipe or a cold water supply
pipe. Gravity and thermos-
syphon circulation systems are
not present. Controls for
circulating hot water system
pumps start the pump with signal
for hot water demand within the
occupancy. Controls
automatically turn off the pump
when water is in circulation loop
is at set-point temperature and
no demand for hot water exists.
Complies
Does Not
Not Observable
Not Applicable
403.5.1.2
[FI29]2
Electric heat trace systems
comply with IEEE 515.1 or UL
515. Controls automatically
adjust the energy input to the
heat tracing to maintain the
desired water temperature in the
piping.
Complies
Does Not
Not Observable
Not Applicable
403.5.2
[FI30]2
Water distribution systems that
have recirculation pumps that
pump water from a heated water
supply pipe back to the heated
water source through a cold
water supply pipe have a
demand recirculation water
system. Pumps have controls
that manage operation of the
pump and limit the temperature
of the water entering the cold
water piping to 104ºF.
Complies
Does Not
Not Observable
Not Applicable
403.5.4
[FI31]2
Drain water heat recovery units
tested in accordance with CSA
B55.1. Potable water-side
pressure loss of drain water heat
recovery units < 3 psi for
individual units connected to one
or two showers. Potable water-
side pressure loss of drain water
heat recovery units < 2 psi for
individual units connected to
three or more showers.
Complies
Does Not
Not Observable
Not Applicable
1 High Impact (Tier 1)2 Medium Impact (Tier 2)3 Low Impact (Tier 3)
Project Title: 155 Miners Trail
Data filename:Page 10 of 11
10/12/21Report date:11/03/2021
Section
#
& Req.ID
Final Inspection Provisions Plans Verified
Value
Field Verified
Value Complies?Comments/Assumptions
403.10.2
[FI12]3
Readily accessible switch on
heaters for swimming pools or
permanent in-ground spas.
Switch operation does not
change heater thermostat
setting. Heater circuit breaker is
installed independent of switch.
Gas-fired heaters equipped with
ignition pilots that are not
continuously burning pilots.
Complies
Does Not
Not Observable
Not Applicable
403.10.3
[FI19]3
Timer switches or other
automatic preset schedule
control method are installed on
heaters and pumps serving pools
and permanent
Complies
Does Not
Not Observable
Not Applicable
403.10.4
[FI20]3
Outdoor heated pools and
outdoor permanent spas have a
vapor retardant cover.
Complies
Does Not
Not Observable
Not Applicable
404.1
[FI6]1
75% of lamps in permanent
fixtures or 75% of permanent
fixtures have high efficacy lamps.
Does not apply to low-voltage
lighting.
Complies
Does Not
Not Observable
Not Applicable
404.1.1
[FI23]3
Fuel gas lighting systems have
no continuous pilot light.
Complies
Does Not
Not Observable
Not Applicable
401.3
[FI7]2
Compliance certificate posted.Complies
Does Not
Not Observable
Not Applicable
Requirement will be met.
303.3
[FI18]3
Manufacturer manuals for
mechanical and water heating
systems have been provided.
Complies
Does Not
Not Observable
Not Applicable
Additional Comments/Assumptions:
1 High Impact (Tier 1)2 Medium Impact (Tier 2)3 Low Impact (Tier 3)
Project Title: 155 Miners Trail
Data filename:Page 11 of 11
10/12/21Report date:11/03/2021
2015 IECC Energy
Efficiency Certificate
Insulation Rating R-Value
0.00Above-Grade Wall
0.00Below-Grade Wall
0.00Floor
49.00Ceiling / Roof
_______Ductwork (unconditioned spaces):
Glass & Door Rating SHGCU-Factor
0.26Window
0.32Door
0.47Skylight
Heating & Cooling Equipment Efficiency
_______Heating System:_________________________
_______Cooling System:_________________________
_______Water Heater:___________________________
Name:Date:
Comments
11/03/2021