Loading...
HomeMy WebLinkAboutMaster Permit.701 Gibson Ave.0086-2021-BRES (5) Page | 1 Construction Management Plan BAUHAUS ON GIBSON 701 Gibson Ave. Aspen, CO 81611 Key Elements Construction 1111 Village Road Carbondale, CO 81623 06/08/2021 Page | 2 Table of Contents 2.0 PROJECT LOCATION 2.1 Disturbance Area 2.2 Project Vicinity Map 2.3 Description 3.0 PROJECT DOCUMENTATION 3.1 Permits/Other Documents 3.2 Public Notification 3.3 Project Sign 3.4 Project Contact Directory 4.0 PROJECT IMPLEMENTATION 4.1 Dates of Construction 4.2 Hours of Construction 4.3 Sequence (Phasing) of Construction 4.4 Adjoining Properties 4.5 Project Fencing 4.6 Public Health & Welfare 4.7 Natural Environment/Tree Protection 5.0 SITE AND RIGHT OF WAY MANAGEMENT 5.1 Right of Way Management Plan 5.2 Emergency Vehicle Access and Ordinance 35 5.3 Construction Parking Details 5.4 Staging Areas 5.6 Site Plan - Construction Trailer, Materials Storage 5.7 Waste Management 6.0 TRAFFIC CONTROL 6.1 General 6.2 Haul Routes 6.3 Delivery Requirements 6.4 Onsite Vehicle Limitations 8.0 SEDIMENT & EROSION CONTROL 8.1 Requirements / Drainage & Erosion Control Plan 10.0 EMISSIONS 10.1 General 10.2 Emissions from Diesel Powered Engines 11.0 NOISE SUPPRESSION 11.1 General 11.2 Noise Suppression Plan 11.3 Noise Suppression Equipment/Methods Used 11.4 Noise Limits - Requirements for Activities Exceeding 80 Decibels APPENDICES A Project Sign Example B Parking Management Form C Haul Route Map D Noise Suppression Plan, Techniques & Equipment E Construction Management Site Plan F Waste Management Plan G Project Schedule I Engine Idling J Holiday Season Dates 06/08/2021 Page | 3 Project Directory General Contractor Key Elements Construction Inc. Kent Bumgarner 1111 Village Road Carbondale, CO 81623 kent@keyelementsconstruction.com (o) 970.963.5667 (m) 970.319.2981 Architect Bldg Seed Architects Leila Schwyhart 417 Main St., Suite B Carbondale, CO 81623 leila@bldgseed.com (o) 720.648.2605 Site Superintendent Andy Hartman Key Elements Construction andy@keyelementsconstruction.com (m) 970.618.8759 Owner Darin and John Eydenberg 701 Gibson Ave. Aspen, CO 81611 darin.whiteeydenberg@kornferry.com (m) 917.275.3077 Structural Engineer KL&A Structural Elizabeth Lozner, PE 215 North 12th St., Unit E Carbondale, CO 81623 970.927.5174 Landscape Architect Mt. Daly Enterprises, LLC Louis Wilsher 96A North Third Street Carbondale, CO 81623 (o) 970.963.9896 (m) 970.355.9306 Civil Engineer High Country Engineering, Inc. 1517 Blake Avenue, Suite 101 Glenwood Springs, CO 81601 (o) 970.945.8676 Traffic Officer Andy Hartman Key Elements Construction andy@keyelementsconstruction.com (m) 970.618.8759 Delivery Coordinator Andy Hartman Key Elements Construction andy@keyelementsconstruction.com (m) 970.618.875 06/08/2021 Page | 4 Project Directory (con’t) City of Aspen Building Department 970.920.5090 Police Department City of Aspen 970.920.5400 Fire Department 970.925.5532 Aspen Valley Hospital 970.925.1120 Holy Cross Energy 970.945.5491 RFTA 970.925.8484 Aspen Public Schools 970.925.3760 Public Service Company of Colorado 800.772.7858 EMERGENCY 911 06/08/2021 Page | 5 2.0 PROJECT INTRODUCTION 2.1 Disturbance Area The total project disturbance area is 8,900 square feet. 2.2 Project Vicinity Map See attached documentation. 2.3 Description Residential remodel construction. 3.0 PROJECT DOCUMENTATION 3.1 Permits Key Elements Construction shall maintain all applicable local, state and federal licenses and permits that apply to the construction project. Applicable permits are as follows: Building Permit Mechanical Permit: Applied for by Mechanical Contractor Plumbing Permit: Applied for by Plumbing Contractor Electrical Permit: Applied for by Electrical Contractor Tree Removal Permit Copies of these documents will be attached to this document once they have been issued. 3.2 Public Notification A project update shall be provided to the public on a basis no less than monthly, via website, newspaper, on-site notices, or other accepted means of notification (per request of the City of Aspen). The first public notification shall occur no later than 10 days prior to construction. The update shall include a description of the current project phase, list any traffic and/or pedestrian concerns, and describe hauling/staging operations. 3.3 Project Sign A project sign shall be constructed and posted. It will include the items shown in Appendix A. The sign will be posted in a location where it is readable where it is readable from the street or driveway and shall meet all Pitkin County Land Use Code requirements. 3.4 Project Directory See page 3 of this document. 3.0 PROJECT IMPLEMENTATION 3.1 Dates of Construction Construction is scheduled to begin when permit is issued and is expected to take about 6 months. 3.2 Hours of Construction Construction hours shall be limited to 7:00am – 6:00pm Monday through Friday. 8am – 5pm Saturday. 06/08/2021 Page | 6 No construction is permitted on Sundays, 4th of July day and/or weekend if it falls on a Friday or Monday, Memorial Day and Labor Day weekends, Thanksgiving Day, Christmas Day, and New Year’s Day. During Presidents Day projects outside the CRA will be permitted to work. During Holiday Season: - Holiday Season is defined as the days of the week leading up to Christmas until New Year’s Day. Refer to Appendix J for Holiday Season dates. 3.3 Sequence (Phasing) of Construction Please see Appendix G for schedule. 3.4 Adjoining Properties No person shall excavate on land close enough to a property line to endanger any adjacent public street, sidewalk, and alley, other public or private property, or easement, without supporting and protecting the property from any damage that might result from construction operations. 3.5 Project Fencing The construction site will have a temporary chain-link construction fence of 6 feet in height with mesh windscreens. Located as indicated on site plan – Appendix E. 3.6 Public Health & Welfare All construction projects located within the City of Aspen shall uphold utmost respect to public health and welfare. 3.7 Tree Protection A site map is included showing exact tree protection fence location and accurate tree driplines (see Appendix E). The contractor will implement a tree protection plan from the Project Landscape Architect prior to commencement of work. The contractor will implement a tree protection plan as part of a Tree Removal Permit. 4.0 PROJECT MANAGEMENT 4.1 Right of Way Management Plan 4.2 Emergency Vehicle Access The contractor will maintain continuous emergency vehicle access, on and around site, including but not limited to police, fire and ambulance services. This includes projects adjacent to roads and driveways. Emergency vehicles will access property from Highway 82 to North Mill Street to Gibson Ave. 4.3 Construction Parking Management See Appendix E for parking management. 4.4 Staging Areas The staging area locations are graphically represented in the attached document Appendix E. The construction trailer location is graphically represented in the attached document, Appendix E. The location of materials storage is graphically represented in the attached document Appendix E. 06/08/2021 Page | 7 4.5 Construction Trailer, Materials Storage & Waste Management The waste management locations (construction trailer, job materials storage, portable restrooms, waste management and recycling containers) are graphically represented in the attached document Appendix E. The contractor agrees to comply with the City of Aspen’s requirements for recycling of cans, bottles, cardboard and construction materials. All containers shall be adequately covered at all times to prevent accumulated debris, litter and trash from blowing onto adjoining properties. 5.0 TRAFFIC CONTROL 5.1 General Traffic control operations shall be managed by the designated traffic control supervisor. 5.2 Haul Routes Project haul routes will follow Gibson Ave. to N. Mill to Highway 82. All routes shall be oriented to minimize traffic congestion and maximize pedestrian safety. 5.3 Onsite Vehicle Limitations All construction vehicle activities shall be defined including maximum vehicle weights as follows: Two Axle Vehicles 36,000 lbs GVW Three or More Axle/Single Unit Vehicles 54,000 lbs GVW Non-Interstate Haulers 85,000 lbs GVW 5.4 Delivery Requirements Traffic control for deliveries will be coordinated with the City of Aspen Engineering Department when it is determined by the contractor that a delivery will impact traffic. Deliveries will be coordinated so that there is not more than two delivery vehicles onsite at any given time. Delivery hours will be between 8am – 5pm Monday through Saturday. Delivery vehicles will not idle for more than five minutes with the exception of generators and PTO type operations. Idling policy attached to this document (Appendix I). 6.0 SEDIMENT & EROSION CONTROL 6.1 Requirements / Drainage & Erosion Control Plan The drainage and erosion plan shall be maintained until surface coverage is at least 70% of pre-disturbance levels or until permanent physical erosion reduction methods have been employed. Refer to Civil drawings. 7.0 EMISSIONS 7.1 General All vehicles and equipment used on site will be properly maintained within tolerances as listed in the manufacturer’s specifications. 7.2 Emissions from Diesel Powered Engines 06/08/2021 Please provide dwg showing erosion control measures when available Page | 8 Emissions from diesel engines operated on the project shall be of a shade or density no darker than 40% opacity, except for starting motion no longer than 10 seconds or for stationary operation not exceeding 10 seconds. 8.0 NOISE SUPPRESSION 8.1 General All activity which measures 80 decibels at the property line of the construction site requires a noise suppression plan. Operating times for equipment or operations which generate this level of noise are between 9am and 5pm Monday through Friday. 8.2 Noise Suppression Plan See Appendix D 8.3 Noise Suppression Equipment/Methods Used All construction equipment shall be properly muffled per manufacturer’s specification and maintained in this condition during the course of construction. Noise Construction Equipment Requiring Noise Suppression Plans Auger Drill Rig Backhoe Chainsaw Clam Shovel Compressor (Air) Concrete Mixer Concrete Pump Concrete Saw Crane (Mobile or Stationary) Dozer Drill Rig Excavator Front End Loader Generator (More than 25 KVA) Grad-all Grader Horizontal Hydraulic Boring Jack Impact Pile Driver (Diesel or Drop) Impact Wrench Jackhammer* Mounted Impact Hammer (Hoe Ram) Paver Pneumatic Tools Rock Drill Scraper Slurry Machine Vibratory Pile Driver Noise Controls for Construction Equipment Equipment Noise Controls Pile Driver Enclosure, muffler 06/08/2021 Page | 9 Stone saw cutting Noise control pad with water Handheld impact drills Reduction of reflected sound Circular saw blades 15° tooth angle, new tooth configuration, slotted saw blades, viscoelastic damping Pneumatic tools Muffler Pavement breaker/Rock Drill Muffler, enclosure of cylinder case and front head, moil damping Portable air compressor Muffler, acoustic enclosures Bulldozer Bulldozer cab liner material, enclosure, sound absorption in canopy, sealing of all openings Wheeled loader Absorption of sound cooling air route Vibratory roller Flexible mounting for pump compartment Joint Cutter Anti-vibration mounting fixtures 8.4 Requirements for Activities Exceeding 80 Decibels 1. Any work producing noise levels over 80 decibels is not permitted to commence until after 9:00 am and is not permitted on Saturdays. That includes but not limited to the use of compressors, generators, jackhammers, power equipment, nail guns, drilling machinery, earth moving equipment and similar loud construction activities. This does not restrict quiet work inside and outside that does not require a power source, including a battery, on Saturday. 2. Notify neighbors within two hundred fifty (300) feet of the project informing them of the kinds of equipment, expected noise levels and durations of loud work. Including the variation of noise levels during a typical construction days may be helpful. Such notification must be in writing and be done seven (7) days prior to the starting time of the project. Communication with neighbors can prevent complaints from arising, and resolve concerns before there is a problem. Provide a phone number where the foreman can be reached prior to the start of the job. 3. Operate equipment in accordance with manufacturer's specifications and with all standard manufacturers’ mufflers and noise-reducing equipment in use and in properly operating condition. 4. Post notices to inform workers, including sub-contractors, about the basic noise requirements, as well as specific noise restrictions, to the project. 5. Install noise barriers around all equipment/activities specified in Table 1 of Appendix D Noise barriers not only significantly reduce construction noise, but they also provide an extra benefit of “hiding” the noise producing sources, thus increasing a neighbor’s tolerance. 6. Move portable loud equipment including generators, compressors, and cement mixers to different sides of the property to reduce impacts on individual neighbors. 7. The use of radios on the site before 8:00 am is not allowed. 06/08/2021 Would also require 14' sound fencing or a noise study if using heavy equip over 80 db Page | 10 Appendix A Bauhaus on Gibson BUILDING PERMIT # Key Elements Construction Inc. Andy Hartman 970.618.8759 Emergency Phone # 970.618.8759 24 Hour Emergency Contact # 970.618.8759 06/08/2021 PEARL CT VE LI OFFICIAL HEAVY HAUL ROUTE MAP Legend Designated Heavy Haul Route Roads Parcels City Boundary Y W S 0 300 AM N SPRUCE ST LI Feet W 600 Map prepared by Engineering and GIS Department City of Aspen, CO 81611 May 4,2007 VINE ST 25 Appendix B – Haul Route Map LAK E A SITE 06/08/2021 Page | 12 APPENDIX D – NOISE SUPPRESSION PLAN Contractors shall require all subcontractors and vendors to use: • “Residential” grade combustion engine exhaust silencers • Electrical vs. pneumatic hand power tools • Hydraulic vs. air powered rock drills • “Silenced” pile drivers vs. Diesel pile drivers Temporary Noise Barrier Materials: Temporary barriers shall be constructed of 3/4-inch Medium Density Overlay (MDO) plywood sheeting, or other material of equivalent utility and appearance having a surface weight of 2 pounds per square foot or greater. The temporary barriers shall be lined on one side with glass fiber, mineral wool, or other similar noise curtain type noise-absorbing material at least 2-inches. The materials used for temporary barriers shall be sufficient to last through the duration of the construction project, and shall be maintained in good repair. Prefabricated acoustic barriers are available from various vendors. An equivalent barrier design can be submitted in lieu of the plywood barrier described above. Noise Control: • Replace worn, loose, or unbalanced machine parts that cause vibration. • Keep machine parts well lubricated to reduce friction. • Acoustical enclosures and barriers around generators • Sound absorbing material and vibration isolation systems on hand tools • Shields, shrouds, or intake and exhaust mufflers. • Noise-deadening material to line hoppers, conveyor transfer points, storage bins, or chutes. • Noise barriers using materials consistent with the Temporary Noise Barrier Materials Section. • Noise curtains • Plywood with concrete blankets at the height of the equipment and that it surrounds the activity such that it directs noise up more than out from the property. • Portable three sided enclosures made out of plywood to move with the activity such as jack hammering. • Internal combustion engines are to be fitted with a suitable muffler in good repair. • Noisy equipment such as cement mixers should be placed on the site to maximize the distance from neighboring houses and/or rotate location so as to not impact just one neighbor. Noise levels drop quickly with distance from the source. • All equipment should be properly maintained, with special attention to mufflers and other noise control devices. • Between work periods, builders are required by city ordinance to shut down machines such as backhoes, bobcats, loaders and generators. • All vehicular movements to and from the site must only be made during the scheduled normal working hours. This includes off-site noise that is associated with a specific project such as staging of concrete trucks. Andy Hartman Key Elements Construction 06/08/2021 Page | 13 Equipment / Activity Noise Controls Pile Driver Enclosure, muffler Stone saw cutting Noise control pad with water Handheld impact drills Reduction of reflected sound Circular saw blades 15º tooth angle, new tooth configuration, slotted saw blades, viscoelastic damping Pneumatic tools Muffler Pavement breaker/ Rock drill Muffler, enclosure of cylinder case and front head, moil damping Portable air compressor Muffler, acoustic enclosures Bulldozer Bulldozer Cab-liner material, enclosure, sound absorption in canopy, sealing of all openings Wheeled loader Absorption of sound cooling air route Vibratory roller Flexible mounting for pump compartment Joint Cutter Anti-vibration mounting fixtures Dropping From Height (re-roofing) When dropping materials from a height—for example, into or out of a truck, or when loading or unloading scaffolding, noise suppression plans require a chute or side baffles. Generators Acoustical enclosures and barriers surrounding equipment Generators25 KVA: The local power grid shall be used wherever feasible to limit generator noise. No generators larger than 25 KVA shall be used and, where a generator is necessary, it shall have maximum noise muffling capability. Hand Tools Sound absorbing material and vibration isolation systems on hand tools Dismantling Formwork use rubber mallets to erect and dismantle formwork Backup Alarms All equipment with backup alarms operated by the Contractor, vendors, suppliers, and subcontractors on the construction site shall be equipped with either audible self-adjusting ambient-sensitive backup alarms or manually-adjustable alarms. The ambient- sensitive alarms shall automatically adjust to a maximum of 5 dBA over the surrounding background noise levels. The manually- adjustable alarms shall be set at the lowest setting required to be audible above the surrounding noise. Installation and use of the alarms shall be consistent with the performance requirements of the current revisions of Society of Automotive Engineering (SAE) J994, J1446, and OSHA regulations. 06/08/2021 Page | 14 Compressors The unit with the lowest noise rating which meets the requirements of the job should be used where work is conducted in the City of Aspen, installed with mufflers and/or enclosed in a noise barrier. Jackhammer All jackhammers and pavement breakers used on the construction site shall have exhaust systems and mufflers that have been recommended by the manufacturer as having the lowest associated noise and shall be enclosed with shields or acoustical barrier enclosures. Concrete crushers or pavement saws Pre-augur pile holes to reduce the duration of impact or vibratory pile driving and tie to local power grid to reduce the use of generators and shall be enclosed with shields or acoustical barrier enclosures. Pneumatic hand power tools All pneumatic tools operated in the City of Aspen must be fitted with an effective silencer on their air exhaust port. 06/08/2021 Page | 15 TABLE 1 CONSTRUCTION EQUIPMENT REQUIRING NOISE SUPPRESSION PLANS Equipment Category Auger Drill Rig Backhoe Chain Saw Clam Shovel Compressor (air) Concrete Mixer Concrete Pump Concrete Saw Crane (mobile or stationary) Dozer Drill Rig Excavator Front End Loader Generator (more than 25 KVA) Gradall Grader Horizontal Hydraulic Boring Jack Impact Pile Driver (diesel or drop) Impact Wrench Jackhammer* Mounted Impact Hammer (hoe ram) Paver Pneumatic Tools Rock Drill Scraper Scarifier Slurry Machine Vibratory Pile Driver 06/08/2021 W W W W W S OW W W W W W W S OW W W W W W W S OW W W W W W WH Y D OE OE OE O E OE W W W W W S OW W SS SS SS SS SS SS SSCO SS SS SS SS SS SS SSCO SS SS SS SS SS SS SSSS W W W W WH Y D M H SS SS SS SS SS SS SS SS SS SS SS SS SS SS W W W W W W W W W W G G G G G G G G G G G G G G G G G GGG G W W W W W S OW W W W W W W S OW W W W W W W S OW W W W W W WH Y D OE OE OE O E OE W W W W W S OW W SS SS SS SS SS SS SSCO M H SS SS SS SS SS SS SSCO SS SS SS SS SS SS SSSS SS SS SS SS SS SS W W W W W W W W W W G G G G G G G G G G G G G G G G G GGG W W W W W S OW W W W W W W S OW W W W W W W S OW W W W W W WH Y D OE OE OE O E OE W W W W W S OW W SS SS SS SS SS SS SSCO SS SS SS SS SS SS SSSS W W W W WH Y D M H SS SS SS SS SS SS SS SS SS SS SS SS SS SS W W W W W W W W W W U E U E U E U E UE UE UE UE UE U E UE UE UE UE UE U E U E U E U E U E U E U E U E U E U E U T U T U T U T U T U T U T U T U T W W W W W W W W W W W W W W W W W W W W W W W W U T UT UT UT UT UT UT UT UT UT UT UT UT UT UT UT UT UT UT UT G G G G G G G G G G G G G G G G G GGG G W W W W W S OW W W W W W W S OW W W W W W W S OW W W W W W WH Y D OE OE OE O E OE W W W W W S OW W SS SS SS SS SS SS SSCO M H SS SS SS SS SS SS W W W W W W W W W W U E U E U E U E U E UE UE UE UE UE U E UE UE UE UE UE U E U E U E U E U E U E U E U E U E U E U T U T U T U T U T U T U T U T U T W W W W W W W W W W W W W W W W W W W W W W W W U T UT UT UT UT UT UT UT UT UT UT UT UT UT UT UT UT UT UT UT G G G G G G G G G G G G G G G G G GGG 7 9 1 0 7 9 1 7 7 9 1 5 7910 7905 7900 7895 7890 7 8 8 5 7 8 8 0 7875 7870 7 9 0 5 7900 7 9 1 3 7914 7914.217914.21 7914.68 7914.66 7911.71 (est.) 7914.21 7909.0 7908.5 2% SLOPE PATH 7915.5 DINING FFE: 7913.2 7913.0 +/- 7908.5 SLOPE 7891.0 7888.25 9.5 7900 7900.78 7908.5 7909.5 7912.0 7908.0 7888.5 SEATING AREA LAWN (6) 6.4" RISERS (5) 12" METAL MESH TREADS (1) STONE TREAD @ LAWN STACKED STONE STAIRS: (16) 6" +/- RISERS STONE LANDING AT BOTTOM LANDING STONE BEAM STAIRS (7) 7" RISERS BOULDER STEPS (16) 6" +/- RISERS BIORETENTION GARDEN (SEE DETAIL A SHEET L.2.002) PATH WITH TIMBER STAIRS. APPROX. (66) 6" RISERS FIELD LOCATED TO FIT SLOPE EXISTING BOULDER TO REMAIN PROPOSED RETAINING TO ABUTT BOULDER STONE BEAMS TO REPLACE EX. TIMBER WALL SNOWMELTED PAVERS (1012 SF) SNOWMELTED CONC. DRIVEWAY (308 SF) NOT FOR CONSTRUCTION 70 1 G i b s o n A v e n u e As p e n , C o l o r a d o BA U H A U S O N G I B S O N Pa r c e l I D # : 2 7 3 7 0 7 3 4 5 0 0 3 COPYRIGHT © MT DALY ENTERPRISES LLC 96 A N o r t h T h i r d S t r e e t Ca r b o n d a l e , C o l o r a d o 8 1 6 2 3 mt d a l y l l c @ g m a i l . c o m Te l 9 7 0 9 6 3 9 8 9 6 MT D A L Y E N T E R P R I S E S L L C LA N D S C A P E A R C H I T E C T U R E LANDSCAPE PLAN L.2.001 PAGE 1 OF 2 NORTH DATE DRAWN BY: JSM 09/29/20 ISSUE ENTRY + SIDEYARD SCALE: 1"= 8' @ 24X36 41680 7880 ARCH 100' = SITE 7914.66 18'-3"16'-0" SWING SET 23'-6" 11/03/20 PROGRESS 1 5 '-0 " U TI L I TY E A S E M E N T 01/11/21 PROGRESS 01/14/21 PROGRESS 6' CONSTRUCTION FENCING PARKING MATERIALS STAGING CONSTRUCTION OFFICE TRAILER TR A S H RECYCLE CONSTRUCTION SITE PLAN - APPENDIX E TREE PROTECTION 06/08/2021 Page | 17 APPENDIX F – WASTE MANAGEMENT PLAN Company Name: Key Elements Construction Inc. Contact Person: Andy Hartman Address: 1111 Village Way Phone #: 970.618.8759 Carbondale, CO 81623 Project Location: 701 Gibson Ave. Aspen, CO 81611 Contractor: Key Elements Construction Inc. Contact Person: Andy Hartman Phone #: 970.618.8759 Recycling Coordinator Contact Person: Andy Hartman Phone #: 970.618.8759 Project Description: Remodel of single-family home. WASTE MANAGEMENT GOALS: - This project will recycle or salvage for reuse a minimum of 25% by weight of the waste generated on-site. - Waste reduction will be achieved through building design, and reuse and recycling efforts will be maintained throughout the construction process. WASTE PREVENTION PLANNING: - Compliance with City of Aspen Solid Waste District’s mandatory recycling requirements for business. City of Aspen mandatory recyclables include: - Newspaper - Corrugated cardboard - White and colored office paper - Plastic and glass bottles and jars - Metal cans - Compliance with Pitkin County Landfill bans, i.e. no disposal of tires, appliances, yard waste, mandatory recyclables, hazardous waste, batteries, fluorescent tubes, electronic waste and large metal items. - Project Construction Documents – requirements for waste management which will be included in all work. Key Elements Construction will contractually require all subcontractors to comply with the Pitkin County Landfill mandatory recycling requirements. - The Construction Waste Reduction Plan shall be implemented and executed as follows and as on the chart: - Salvageable materials will be diverted from disposal where feasible. - There will be a designated area on the construction site reserved for a row of dumpsters each specifically labeled for respective materials to be received. - Hazardous waste will be managed by a licensed hazardous waste vendor. 06/08/2021 Page | 18 1. Salvage Yes No Do you plan to salvage materials from this project prior to demolition or construction? If YES, list the materials that will be salvaged (e.g., doors, windows, casing, toilets, sinks, fixtures, wood siding, tiles, etc.) Facility or Salvage company receiving material Receipt attached Y/N? 1. 2. 3. 4. 5. 2. Source Separation Yes No Do you plan to source separate any materials for delivery to a recycling facility (e.g. separation of material such as wood, concrete, metal into separate bins) M at er ial s H a u l e r F a c i l i t y 3. On-Site Use Yes No Do you plan any on-site reuse activities for this project (e.g. reuse of wood forms for concrete, on-site crushing of concrete for on-site use, use of reusable containers or pallets for material deliveries, etc.)? (please provide photos) photos of locations these items were reused) If yes, please describe: 4. Disposal at landfill Will any materials be disposed of (not recycled or salvaged) at the landfill? Yes No Estimate the number of tons of material to be taken to the landfill for disposal: 06/08/2021 ID Task Mode Task Name Duration Start Finish 0 701 Gibson 142 days Wed 12/15/21Thu 6/30/22 1 Project Permit Start 142 days Wed 12/15/21 Thu 6/30/22 2 Mobilization 3 days Wed 12/15/21 Fri 12/17/21 3 Protection Install 4 days Mon 12/20/21 Thu 12/23/21 4 Demolition 20 days Fri 12/24/21 Thu 1/20/22 5 Framing 20 days Fri 1/21/22 Thu 2/17/22 6 Steel 5 days Fri 1/21/22 Thu 1/27/22 7 Stair 15 days Fri 1/28/22 Thu 2/17/22 8 Exterior Door Installation2 days Fri 1/28/22 Mon 1/31/22 9 MEP Rough-In 14 days Wed 1/19/22 Mon 2/7/22 10 Mechanical 14 days Wed 1/19/22 Mon 2/7/22 11 HVAC 10 days Wed 1/19/22 Tue 2/1/22 12 Fireplaces 6 days Wed 1/19/22 Wed 1/26/22 13 Roofing Repair - TBD 10 days Thu 2/3/22 Wed 2/16/22 14 Finishes 76 days Wed 2/16/22 Wed 6/1/22 15 Plumbing Fixture Install 8 days Wed 2/16/22 Fri 2/25/22 16 Drywall 10 days Wed 2/16/22 Tue 3/1/22 17 Paint 10 days Wed 3/2/22 Tue 3/15/22 18 Wallpaper 8 days Wed 3/16/22 Fri 3/25/22 19 Tile Install 15 days Mon 2/28/22 Fri 3/18/22 20 Glass 5 days Mon 3/21/22 Fri 3/25/22 21 Decorative Metal 3 days Mon 2/28/22 Wed 3/2/22 22 Interior Trim 25 days Mon 2/28/22 Fri 4/1/22 23 Cabinets 8 days Mon 4/4/22 Wed 4/13/22 24 Countertops 5 days Thu 4/14/22 Wed 4/20/22 25 Excavation 15 days Fri 4/1/22 Thu 4/21/22 26 Civil 25 days Mon 4/11/22 Fri 5/13/22 27 Utilities 10 days Mon 4/11/22 Fri 4/22/22 28 Site Drainage 20 days Mon 4/25/22 Fri 5/20/22 29 Drywell 5 days Mon 5/23/22 Fri 5/27/22 30 Landscape 30 days Mon 5/2/22 Fri 6/10/22 Nov Dec Jan Feb Mar Apr May Jun Jul Qtr 1, 2022 Qtr 2, 2022 Qtr 3, 2022 ROUGH DRAFT - Non-Permitted Construction Schedule Bauhaus on Gibson 701 Gibson Aspen, CO 81623 Page 1 Appendix G 06/08/2021 Page | 20 APPENDIX I – ENGINE IDLING Sec. 13.08.110. Engine idling. (a) Except as hereinafter provided, it shall be unlawful for any person to idle or permit the idling of the motor of any stationary motor vehicle for a prolonged or unreasonable period of time determined herein to be five (5) minutes or more within any one (1) hour period of time. (b) This Section shall not apply when an engine must be operated in the idle mode for safety reasons including, but not limited to, the operation of cranes and forklifts used in the construction industry. (c) The time required by a diesel powered motor vehicle with a gross weight rating of ten thousand (10,000) pounds or more while operating in a stationary position to achieve a temperature of one hundred twenty (120) degrees Fahrenheit and an air pressure of one hundred (100) pounds per square inch, shall not be included in the computation of the five (5) minutes determined herein to be a prolonged or unreasonable period of time. The temperature and air pressure as indicated on the vehicle's gauges may be used for determining the diesel engine's temperature and air pressure. (d) The time during which transportation vehicles are actively loading or discharging passengers shall not be included in the computation of the five (5) minutes determined herein to be a prolonged or unreasonable period of time. A transportation vehicle shall be defined for purposes of this Section to mean motor vehicles designed to transport a minimum of sixteen (16) persons. (Code 1971, §11-2.70; Ord. No 74-1992,§1) 06/08/2021 Page | 21 APPENDIX J – HOLIDAY SEASON DATES 2021 Holiday Restricted Hours in Core Christmas Restricted Hours in CRA Monday Tuesday Wednesday Thursday Friday Saturday Sunday Dec 18 Dec 19 Dec 20 Dec 21 Dec 22 Dec 23 Dec 24 Dec 25 Dec 26 Dec 27 Dec 28 Dec 29 Dec 30 Dec 31 Jan 1 06/08/2021