HomeMy WebLinkAboutFile Documents.1012 E Cooper Ave.0131-2020-BRES (21)Specications
Features
Limited 10 year parts warranty - 1-year in home labor warranty
where available
Microprocessor based diagnostics and LED indication
Stainless Steel Tank Construction
Intelligent control communication
UL/CUL Listed
Required Equipment
EC-150 Control
Required Electrical Service
Dedicated circuit required: See Specification Chart for proper
electrical requirements
Product Information
Water Supply - ⅜" Compression Fitting, 120 PSI Max
Steam Outlet - ¾" Brass NPT male thread
Pressure Relief Valve - ¾" NPT female thread
Drain Outlet - Capped ½" Brass NPT male thread
Supplied with a 35’ control cable
Generator
Weight - 41 lbs.
Installation Notes
For optimum performance, the steam generator should be
mounted as close as possible to the steam room. If
needed, the steam pipe may be up to 50’ long.
Steam Generators should be accessible for service.
Do NOT install near flammable material such as paints,
thinners, gasoline, etc.
Steam generators must NOT be installed outdoors, in
moist, humid areas, in areas prone to freezing, or extreme
heat such as an unventilated attic. To do so will void the
warranty.
Steamhead to be mounted 12" to 18" above floor or 6"
above rim of tub and as far from the seating area as
possible.
Service Access
Minimum: 28" L x 18" W x 22" H (35" L with an Optional
Auto Drain)
07/18 Pub. No. 1052-B
Steam Generator Models: ES-12 and ES-15
- 1 -
* Refer to sizing guidelines to accurately determine the proper size generator for the installation.
90°C copper wire is required for generator connection. Installation shall be in accordance with NEC and local electrical
Steam Generator Specication Chart
12
15
550
675
240/1/50
240/1/63
60
80
Product
Number
KW
Rating
Max. Adj. Cu. Ft.
Range*
Volts/Phase/
Max. Amps
Line
Fuse
17¾" x 7½" x 15½"
17¾" x 7½" x 15½"
Dimensions
L x W x H
ES-12
ES-15
Models: ES-12 and ES-15
¾" Steam Outlet
¾" Safety Relief Valve
½" Capped Drain Line for
Optional Auto Drain
Water Inlet ⅜"
Compression Fitting
Access Panel
1¾
"
6
⅞
"
8
¾
"
10
"
15
½
"
*17 ¾"*7 ½"
1⅛"
* Add ¼" to the dimension for the louvers
Front Access Front Side View
Back View
Top View
SER
NO.
NO.
SIZE
IN.
MODEL
SET
PSIG
CAP
LBS/HR
Mounting Holes
16"
Knockouts for
Control Cables
Top of Access
Panel
5 ¾"
4"
5 ⅝"
1 ¼"
Specications
07/18 Pub. No. 1052-B
Dimensional Drawing Models: ES-12 and ES-15
- 2 -
Technical support, installation and service: Support@EliteSteam.com Tel: 800-555-6890
Product sales, order inquiries and returns: Sales@EliteSteam.com