HomeMy WebLinkAboutFile Documents.975 King St.0089-2022-BCHO (3) AMRICAN FIRE GLASS
570 Third Street Lake Elisnore. CA 92530 1-888-264-1017 americanfireglass_com
Flat Pan Spark Ignition Kits
Use and Care Instructions
(AFG-I NST-020_REVE_07/18)
American Fire Glass' Fire Pit Spark Ignition Flat Pan Kits offer time saving cost effective solutions of
internal components for natural gas and propane outdoor fire pits. These Flat Pan Kits are available in
square and round shapes of various sizes to accommodate different outdoor fire pit dimensions.
Kit Includes: �
1. Stainless Steel Flat Pan (Square or Round)
2. Stainless Steel Fire Pit Ring
3. Fire Pit Connection Kit w/ Key Valve �� �
4. Push-Button Igniter Kit
5. Propane Air Mixer (Propane Kits only)
Optional Component: — "' ® (�✓�
1. Ignitor/Key Valve Mounting Plate (See Figure 6) Page 3logr-
;- /
AWARNING: This product can expose you to chemicals including (Lead and Lead
Compounds, Lead Acetate, Lead, Phosphate, Lead Subacetate, Nickel, Antimony.
Chromium, and Cobalt), which are known to the State of California to cause cancer and birth
defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
RECEIVED
12/02/12022
ASPEN
BUILDING DEPARTMENT
IMPORTANT
Be sure to use gas thread seal for ALL non-tapered connections.
Be sure to tighten ALL connections securely.
The Flat Pan Assembly can be installed in various configurations, as determined by the installer. In some
instances, the flat pan is installed using hard pipe, and is supported by "filler" aggregate underneath the
flat pan. Some install the flat pan in a "sandwiched" method or on top of a "step" as part of the fire pit
structure.
American Fire GlassTM always recommends the components be installed by a licensed professional, and
in accordance with Federal, State, and local regulations such as ANSI Z21.97-2012 and CSA 2.41-2012,
latest editions.
Assembly Instructions
'* Use Teflon tape or sealing compound on all pipe threads. Do not use on Flare Fittings.
STEP 1 - Install Fire Pit Ring plug into the top of the fire pit ring. Gas exit
holes can be facing up or down. (FIGURE 1) Do not over tighten.
Tip! We recommend gas outlet holes up for propane. Gas outlet holes are
acceptable upor down for natural gas. ,•,
p STEP 2 - Screw fire pit ring onto the Flat Pan.
FIGURE 1
114 ,
(FIGURE 2) Do not over tighten.
FIGURE 2
STEP 3 - Insert the Spark Igniter Probe into the Flat Pan, and secure with the
provided screw and nut.
(FIGURE 3)
Tip! For best results, fill pan with burner media before ignition.
FIGURE 3 RECEIVED
12/02/2022
ASPEN
BUILDING DEPARTMENT
STEP 4- ** For LP Installation only -Attach the Air Mixer Assembly to the %2"
male threads on the bottom of the pan. Be sure the stamped arrow on the
Propane Air Mixer is pointing toward the fire pit ring. The arrow indicates
the direction of gas flow. (FIGURE 4)
NOTE: For Natural Gas installations, the Propane Air Mixer is not utilized.
The Natural Gas configuration does not use a propane regulator.
FIGURE 4
STEP 5 -Attach the Gas Hose from the exit side of the Key Valve to the
bottom of the Propane Air Mixer. The Gas Hose uses a 3/8" flared male
to 1/2" Female adapter (included) for connecting to the Flat Pan. 11',(FIGURE 5)
STEP 6 -Attach the Igniter Spark Probe Wire and the Igniter Ground Wire to
I JEA
the back of the Push Button Assy. Either wire can be placed on either pin.
Connect the eyelet end of the ground wire to a clean metal ground surface.
FIGURE 5
NOTE: Optional Accessory -The location and mounting of the Ignitor/Key
Valve plate is to be determined by the installer.
„5.
(Figure 6)
STEP 7 - Unscrew the Push Button rubber cap and be sure that the AAA battery FIGURE 6
is installed with the "-" side facing the rubber button. Re-attach the Push Button
rubber cap by gently turning it clockwise until snug.
STEP 8 - Install Fire glass on top of the Flat Pan/Fire Pit Ring. A fire glass depth of 2" is recommended.
NOTE: To avoid excessive heat to the fire pit ring/flat pan, do not light without fire glass installed for more
than approximately 30 seconds. When fire glass is installed the flame burns above the fire glass, not
directly on the stainless-steel components.
NOTE: Ensure the fire pit enclosure is properly vented (36 square inch minimum) and has adequate
drainage.
Questions, comments, or suggestions?
Please call American Fire GlassTM Customer Service Department
Phone: 888.264.1017 Fax: 888.679.3149 Email: info@americanfireglass.com RECEIVED
12/02/2022
ASPEN
BUILDING DEPARTMENT
General Overview
., - w Fireglass
' " r (2"depth for propane)
ci
;::
% - Burner Assy.
•
Propane Air Mixer
(Arrow pointing toward burner;
not used for Natural Gas)
' o Exit Gas Hose
g I (To Air Mixer if Propane)
Gas Key Valve
0 • (Arrow point in direction of gas flow)
Entry Gas Hose
(From gas source to Key Valve)
American Fire Glass",Inc.
570 Third Street,Lake Elsinore,CA 92530
www.americanfireglass.com
1-888-264-1017
AFG-INST-020_REVE_07/18
RECEIVED
12/02/42022
ASPEN
BUILDING DEPARTMENT
LIMITED LIFETIME CONSUMER PRODUCT WARRANTY
The following warranty has been drafted to comply with the MAGNUSON-MOS-WARRANTY ACT
applicable to products manufactured after July 4, 1975. It replaces and supersedes any warranty in this
package or in any printed literature.
LIMITED WARRANTY EXCLUSIONS FROM WARRANTY:
AMERICAN FIRE GLASSTM,570 THIRD STREET, LAKE ELSINORE, 1. The foregoing warranty is limited solely as set forth
CA U.S.A.,warrants all American Fire Glass products and herein and applies only for the periods designated
accessories against defects in materials and workmanship, above.
and suitable for a particular purpose,for a period of: 2. AMERICAN FIRE GLASSTM shall not be liable for any
1. TEMPERED GLASS—All glass is guaranteed against loss,damage, incidental or consequential damages
burnout in the original installation for the lifetime of of any kind,whether based upon warranty,
the initial purchaser. contract,or negligence,arising in connection with
2. BURNERS/PANS—5 years from date of purchase. the sale, use,or report of the product. Some
3. FITTINGS—5 years from date of purchase. states do not allow the exclusion or limitation of
4. IGNITION SYSTEM and PARTS—1 year from date of incidental or consequential damages,so the above
purchase. limitation or exclusion may not apply to you.
5. LITE STONES—2 years from date of purchase. 3. The maximum liability of AMERICAN FIRE GLASSTM
THIS WARRANTY IS FOR THE BENEFIT OF THE ORIGINAL in connection with this limited warranty shall not
PURCHASER. in any case exceed the contract price paid for the
WARRANTY ADJUSTMENT: product claimed to be defective or unsuitable.
1. AMERICAN FIRE GLASSTM agrees to repair or furnish 4. This warranty does not extend to any product
a replacement for, but not remove or install any provided by AMERICAN FIRE GLASSTM which has
product or component,which proves defective, been subjected to misuse, neglect,accident,
within the above warranty and appropriate time improper installation,or use in violation of
periods stated instructions furnished by AMERICAN FIRE GLASSTM.
2. BUYER shall notify AMERICAN FIRE GLASSTM of any 5. This warranty does not extend to or apply to any
defect within this warranty no later the thirty(30) unit which has be repaired or altered at any place
days after a defect is discovered. other than an AMERICAN FIRE GLASSTM factory, or
3. No product will be accepted for return or by persons not expressly approved by AMERICAN
replacement without authorization by AMERICAN FIRE GLASSTM.
FIRE GLASSTM. Before returning merchandise, 6. Components manufactured by any supplier other
contact AMERICAN FIRE GLASSTM giving full details of than AMERICAN FIRE GLASSTM shall bear only that
the complaint, a copy of sales receipt, invoice or warranty made by the manufacturer of that
other evidence of purchase date,and an image of product.
the item installed. Merchandise returned without 7. Freight damage and color changes occurring from
proof of purchase date will be serviced out of cause beyond manufacturer's control and are not
warranty at our prevailing service and part rates. If covered by any warranty.
merchandise was damaged in transit,file claim THIS WARRANTY GIVES YOU SPECIFIC LEGAL
immediately with the carrier, and contact RIGHTS,AND YOU MAY ALSO HAVE OTHER RIGHTS
AMERICAN FIRE GLASSTM. Product returned must be WHICH VARY FROM STATE TO STATE. AMERICAN
addressed as follows: FIRE GLASSTM shall be held harmless from any and
AMERICAN FIRE GLASSTM all claims by the buyer as a result of injury or
570 THIRD STREET damage to an ultimate user or other person
LAKE ELSINORE,CA 92530 caused by the product solid herein by the seller to
Shipping charges must be pre-paid by buyer. the buyer,whether the injury or damage results
REPAIR OR REPLACEMENT UNDER THIS from the assembly, installation,operation,
WARRANTY WILL BE SHIPPED AT NO CHARGE TO shipment,storage or manufacture of this product.
THE CUSTOMER. AMERICAN FIRE GLASSTM makes no warranties,
expressed or implied,other than th I E D
stated herein. � v
12/02/52022
ASPEN
BUILDING DEPARTMENT