HomeMy WebLinkAboutFile Documents.315 E Dean St.0035-2023-BCOM (8)SMOKE ALARMS AND
CARBON MONOXIDE
DETECTORS REQUIRED
THROUGHOUT DWELLING
UNIT PER CITY OF ASPEN
MUNICIPAL CODE 8.15
These plans must be kept at the
building site or inspection
delays may occur. Construction
shall conform to these plans. All
changes shall be approved by
the building official.
Field Plan Set Must Be Printed In Color
SEPARATE PERMITS ARE
REQUIRED FOR ELECTRICAL,
PLUMBING, MECHANICAL, OR
FIRE SPRINKLER WORK
It should be known that this review shall
not relieve the applicant of their
responsibility to comply with the
requirements of the City of Aspen
Municipal Code. Pursuant to
Sec.26.104.050, any permit or approval
issued in error or otherwise not in
conformity with the requirements of this
Title, shall be void. Similarly, any permit
or approval issued in reliance upon or
as a result of, a materially false
statement or representation made in
the process of obtaining the permit or
development approval shall, likewise,
be void. Any person having received a
void or voidable permit or approval
shall not be relieved from having to
comply with all applicable terms and
conditions of this Title and the City shall
not be estopped from fully enforcing
same.
08/21/2023
linzhid
100% of lamps in
permanently installed light
fixtures must be high efficacy
- IECC R404.1
Existing Fireplaces and Woodstoves:
-If you propose to alter the firebox of a fireplace or move a
fireplace, it shall be removed or replaced with a gas direct
vent or electric appliance.
-Conversion to or replacement with gas log is prohibited.
-New or replacement gas fireplaces are subject to REMP.
-If you propose to move or alter a woodstove, it shall be
removed or replaced with a department certified woodstove.
0035-2023-BCOM
ASPEN OWNER LLC
315 E DEAN ST
273718285032
KEY NOTES
REMOVE HEAD WALL DRAPERY AND TRACK1
REMOVE EXISTING AND STORE2
WALL COVERING TO BE REMOVED AND WALL TO BE
PREPPED FOR NEW SPECIFIED WALL COVERING3
REMOVE ART AND STORE FOR REUSE IN REMODELED ROOMS4
TRIM, CROWN, BASEBOARD TO BE REFINISHED AS SPECIFIED.
PATCH AND PREP AS REQUIRED FOR NEW FINISH.
5
REFINISH CEILING AS SPECIFIED. PATCH AND PREP AS REQUIRED FOR NEW FINISH6
EXISTING CABINETRY TO REMAIN. PATCH/REPAIR AND REFINISH AS NEEDED.7
EXISTING MIRROR SURFACE TO REMAIN. PROTECT IN PLACE AS REQUIRED.8
REFINISH EXISTING WOOD FLOORING9
NEW ROOM SIGNAGE TBD10
WALL COVERING TO BE REMOVED AND WALL TO BE PREPPED FOR NEW SPECIFIED
WALL COVERING11
REMOVE EXISTING GLASS SHELF. TO BE REPLACED WITH NEW, REFER TO ELEVATION AND DETAIL
FOR ADDITIONAL INFORMATION ON NEW SHELF12
REMOVE EXISTING MIRROR AT BACK OF MINIBAR CABINET13
REMOVE EXISTING STONE TOP. TO BE REPLACED. PREP SUBSTRATE AS REQUIRED FOR NEW TOP.14
EXISTING TRANSITION STRIP AT FLOORING INSERT TO REMAIN.15
REMOVE EXISTING CARPET INSERT. TO BE REPLACED WITH NEW SPECIFIED CARPET.16
REMOVE EXISTING TV AND FRAME. NEW TV TO BE INSTALLED. EXISTING WALL ELECTRICAL AND
DATA TO REMAIN AND REUSED (IF POSSIBLE WITH NEW LOCATION). ABANDON BEHIND WALL HIGH
RECEPTACLE ABOVE FRAME (IF POSSIBLE) PATCH AND PREP TO BE CONCEALED OVER WITH NEW
WALL COVERING
17
EXISTING RECEPTACLE TO REMAIN18
EXISTING LOUVERED HVAC GRILLS TO REMAIN. PATCH AND PREP AS REQUIRED FOR NEW FINISH19
EXISTING VANITY MIRROR TO BE REMOVED AND REPLACED WITH NEW MIRROR. SCONCE JBOX TO
REMAIN AND REUSED.20
EXISTING SINKS TO BE REPLACED AS NECESSARY FROM OPERATIONS ATTIC STOCK BY
OPERATIONS.21
EXISTING LIT MIRROR TO BE REPLACED WITH NEW SPECIFIED MIRROR22
REMOVE EXISTING WINDOW DRAPERY; TO BE REPLACED.23
REMOVE EXISTING MILLWORK PULLS; TO BE REPLACED.
IN C-BUILDING ONLY KEEP EXISTING MILLWORK PULLS
24
L
Room Refresh SOW
The entire 5th level will be unoccupied while
corridor work is being done
All lighting for existing and proposed fixtures are on a
17 amp current limiter
To be verified at inspection
2021 IBC Code References
L 100% of lamps in permanently installed lights must be high efficacy, Ordinance 1, 2023.
AS Access and service space for maintenance required, 2021 IMC 306
CO Carbon monoxide detector required per Aspen Municipal Code 8.15
DE Clothes dryer exhaust, 2021 IMC 504. Makeup air required if over 200 CFM
SE Continuous air barrier required; all exterior joints, cracks, and holes to be caulked, gasketed, sealed, Ordinance 1, 2023
DV Direct vent sealed combustion required, Ordinance 1, 2023
EP Electric panel happy space: 30in x 36in x 78in, not in storage, NEC 110.26
EE Emergency escape and rescue opening required 2021 IBC 1031
ET Exhausts terminate 3ft from prop line and openings, 10ft from intakes, 2021 IMC 501.3.1
GR Guards, 42in min high, 4in max opening. Guards within dwelling unit 36in min high 2021 IBC 1015
HR Handrails 34in-38in high, 2021 IBC 1014
IT Intake openings 10ft from lot line & contaminant sources (vents, streets), 2021 IMC 401.4
MA Make up air required if hood exhausts greater than 400 CFM, 2021 IMC 505.4
V Mechanical ventilation required, Ordinance 1, 2023
F New or replacement fenestration in existing residential buildings shall not exceed 0.28 U-factor, NFRC label required, Ordinance 1, 2023
SG Safety glazing required, 2021 IBC 2406
SA Smoke alarm per NFPA 72 required, 2021 IBC 907.2.11
WFP Window fall protection- operable window less than 24in AFF and greater than 72in above exterior grade: use opening control device listed to ASTM F2090, 2021 IBC 1015.8